EN 62115:2005/A12:2015
|
ELECTRIC TOYS - SAFETY (IEC 62115:2003 + A1:2004, MODIFIED) |
BS EN 61918:2013
|
Industrial communication networks. Installation of communication networks in industrial premises |
EN 61000-1-2:2016
|
Electromagnetic compatibility (EMC) - Part 1-2: General - Methodology for the achievement of functional safety of electrical and electronic systems including equipment with regard to electromagnetic phenomena |
EN 61204-3:2000
|
Low voltage power supplies, d.c. output - Part 3: Electromagnetic compatibility (EMC) |
EN 61000-4-5:2014/A1:2017
|
ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-5: TESTING AND MEASUREMENT TECHNIQUES - SURGE IMMUNITY TEST (IEC 61000-4-5:2014/A1:2017) |
EN 62052-21:2004/A1:2017/AC:2018-04
|
ELECTRICITY METERING EQUIPMENT (AC) - GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - PART 21: TARIFF AND LOAD CONTROL EQUIPMENT (IEC 62052-21:2004/A1:2016/COR1:2018) |
EN 50082-1:1997
|
Electromagnetic compatibility - Generic immunity standard - Part 1: Residential, commercial and light industry |
CSA C22.2 No. 168 : 2016
|
COMMERCIAL DISHWASHERS |
UNE-EN ISO 13856-2:2013
|
Safety of machinery - Pressure-sensitive protective devices - Part 2: General principles for design and testing of pressure-sensitive edges and pressure-sensitive bars (ISO 13856-2:2013) |
EN 60761-1:2004
|
Equipment for continuous monitoring radioactivity in gaseous effluents - Part 1: General requirements |
EN 1760-3:2004+A1:2009
|
Safety of machinery - Pressure sensitive protective devices - Part 3: General principles for the design and testing of pressure sensitive bumpers, plates, wires and similar devices |
EN 62387-1:2012
|
Radiation protection instrumentation - Passive integrating dosimetry systems for environmental and personal monitoring - Part 1: General characteristics and performance requirements |
EN 1643:2014
|
Safety and control devices for gas burners and gas burning appliances - Valve proving systems for automatic shut-off valves |
EN 60947-1:2007/A2:2014
|
LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES (IEC 60947-1:2007/A2:2014) |
UNE-EN 62841-1:2016
|
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 1: General requirements |
EN 50557:2011
|
Requirements for automatic reclosing devices (ARDs) for circuit breakers-RCBOs-RCCBs for household and similar uses |
BS EN 61058-1 : 2002
|
SWITCHES FOR APPLIANCES - PART 1: GENERAL REQUIREMENTS |
EN 61326-3-2:2008
|
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 3-2: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) - Industrial applications with specified electromagnetic environment |
EN 61513:2013
|
Nuclear power plants - Instrumentation and control important to safety - General requirements for systems |
EN 50240:2004/corrigendum:2005
|
|
TS 136 113 : 13.0.0
|
LTE; EVOLVED UNIVERSAL TERRESTRIAL RADIO ACCESS (E-UTRA); BASE STATION (BS) AND REPEATER ELECTROMAGNETIC COMPATIBILITY (EMC) (3GPP TS 36.113 VERSION 14.2.0 RELEASE 14) |
NF EN 61851-21 : 2002
|
ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - PART 21: ELECTRIC VEHICLE REQUIREMENTS FOR CONDUCTIVE CONNECTION TO AN A.C./D.C. SUPPLY |
EN 62215-3:2013
|
Integrated circuits - Measurement of impulse immunity - Part 3: Non-synchronous transient injection method |
EN 60947-6-2:2003/A1:2007
|
LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 6-2: MULTIPLE FUNCTION EQUIPMENT - CONTROL AND PROTECTIVE SWITCHING DEVICES (OR EQUIPMENT) (CPS) |
UNE-EN ISO 13856-1:2013
|
Safety of machinery - Pressure-sensitive protective devices - Part 1: General principles for design and testing of pressure-sensitive mats and pressure-sensitive floors (ISO 13856-1:2013) |
I.S. EN 62041:2010
|
SAFETY OF TRANSFORMERS, REACTORS, POWER SUPPLY UNITS AND COMBINATIONS THEREOF - EMC REQUIREMENTS |
IEEE 1143-2012 REDLINE
|
IEEE Guide on Shielding Practice for Low Voltage Cables |
EN 50083-2:2012/A1:2015
|
CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 2: ELECTROMAGNETIC COMPATIBILITY FOR EQUIPMENT |
EN 50121-5:2017
|
Railway applications - Electromagnetic compatibility - Part 5: Emission and immunity of fixed power supply installations and apparatus |
EN 55020:2007/A12:2016
|
SOUND AND TELEVISION BROADCAST RECEIVERS AND ASSOCIATED EQUIPMENT - IMMUNITY CHARACTERISTICS - LIMITS AND METHODS OF MEASUREMENT (CISPR 20:2006) |
UNE-EN 61000-6-5:2016
|
Electromagnetic compatibility (EMC) - Part 6-5: Generic standards - Immunity for equipment used in power station and substation environment |
EN IEC 61058-1:2018
|
Switches for appliances - Part 1: General requirements |
CSA C828 : 2013
|
PERFORMANCE REQUIREMENTS FOR THERMOSTATS USED WITH INDIVIDUAL ROOM ELECTRIC SPACE HEATING DEVICES |
EN 61000-6-7:2015
|
Electromagnetic compatibility (EMC) - Part 6-7: Generic standards - Immunity requirements for equipment intended to perform functions in a safety-related system (functional safety) in industrial locations |
EN 60974-10:2014/A1:2015
|
ARC WELDING EQUIPMENT - PART 10: ELECTROMAGNETIC COMPATIBILITY (EMC) REQUIREMENTS (IEC 60974-10:2014/A1:2015) |
EN 61131-2:2007
|
Programmable controllers - Part 2: Equipment requirements and tests |
EN 62488-2:2017
|
Power line communication systems for power utility applications - Part 2: Analogue power line carrier terminals or APLC |
EN 62026-3:2015
|
Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 3: DeviceNet |
EN 60947-4-2:2012
|
Low-voltage switchgear and controlgear - Part 4-2: Contactors and motor-starters - AC semiconductor motor controllers and starters |
UNI EN 14143 : 2013
|
RESPIRATORY EQUIPMENT - SELF-CONTAINED RE-BREATHING DIVING APPARATUS |
UNI EN 14846 : 2008
|
BUILDING HARDWARE - LOCKS AND LATCHES - ELECTROMECHANICALLY OPERATED LOCKS AND STRIKING PLATES - REQUIREMENTS AND TEST METHODS |
EN 62083:2009
|
MEDICAL ELECTRICAL EQUIPMENT - REQUIREMENTS FOR THE SAFETY OF RADIOTHERAPY TREATMENT PLANNING SYSTEMS |
I.S. EN 62343-2:2014
|
DYNAMIC MODULES - PART 2: RELIABILITY QUALIFICATION |
BS EN 809 : 1998
|
PUMPS AND PUMP UNITS FOR LIQUIDS - COMMON SAFETY REQUIREMENTS |
UNI EN 13718-1 : 2014
|
MEDICAL VEHICLES AND THEIR EQUIPMENT - AIR AMBULANCES - PART 1: REQUIREMENTS FOR MEDICAL DEVICES USED IN AIR AMBULANCES |
SAE J 2954 : 2017
|
WIRELESS POWER TRANSFER FOR LIGHT-DUTY PLUG-IN/ELECTRIC VEHICLES AND ALIGNMENT METHODOLOGY |
NF EN 62022 : 2008
|
INSTALLED MONITORS FOR THE CONTROL AND DETECTION OF GAMMA RADIATIONS CONTAINED IN RECYCLABLE OR NON RECYCLABLE MATERIALS TRANSPORTED BY VEHICLES |
EN 12405-1:2005+A2:2010
|
Gas meters - Conversion devices - Part 1: Volume conversion |
BS EN 60870-2-1:1996
|
Telecontrol equipment and systems. Operating conditions Power supply and electromagnetic compatibility |
EN 298:2012
|
Automatic burner control systems for burners and appliances burning gaseous or liquid fuels |
I.S. EN 62488-2:2017
|
POWER LINE COMMUNICATION SYSTEMS FOR POWER UTILITY APPLICATIONS - PART 2: ANALOGUE POWER LINE CARRIER TERMINALS OR APLC |
CSA IEC 61000-6-2 : 2008 : R2017
|
ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY FOR INDUSTRIAL ENVIRONMENTS |
EN 61083-1:2001
|
Instruments and software used for measurement in high-voltage impulse tests - Part 1: Requirements for instruments |
EN 55103-2:2009
|
Electromagnetic compatibility - Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use - Part 2: Immunity |
EN 61058-1:2002/A2:2008
|
SWITCHES FOR APPLIANCES - PART 1: GENERAL REQUIREMENTS |
EN 50293:2012
|
Road traffic signal systems - Electromagnetic compatibility |
EN 62040-2:2006/corrigendum:2006
|
|
EN 61326-3-1:2017
|
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 3-1: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) - General industrial applications |
EN 61547:2009
|
Equipment for general lighting purposes - EMC immunity requirements |
EN 61786-1:2014
|
Measurement of DC magnetic, AC magnetic and AC electric fields from 1 Hz to 100 kHz with regard to exposure of human beings - Part 1: Requirements for measuring instruments |
CLC/TR 50669:2017
|
Investigation Results on Electromagnetic Interference in the Frequency Range below 150 kHz |
CSA ISO/IEC 18046-2 : 2013(R2017)
|
INFORMATION TECHNOLOGY - RADIO FREQUENCY IDENTIFICATION DEVICE PERFORMANCE TEST METHODS - PART 2: TEST METHODS FOR INTERROGATOR PERFORMANCE |
EN 61851-21:2002
|
Electric vehicle conductive charging system - Part 21: Electric vehicle requirements for conductive connection to an a.c/d.c. supply |
EN 60255-22-4:2008
|
MEASURING RELAYS AND PROTECTION EQUIPMENT - PART 22-4: ELECTRICAL DISTURBANCE TESTS - ELECTRICAL FAST TRANSIENT/BURST IMMUNITY TEST |
EN 61851-22:2002
|
Electric vehicle conductive charging system - Part 22: AC electric vehicle charging station |
BS EN 809:1998+A1:2009
|
Pumps and pump units for liquids. Common safety requirements |
UNI EN 1643 : 2014
|
SAFETY AND CONTROL DEVICES FOR GAS BURNERS AND GAS BURNING APPLIANCES - VALVE PROVING SYSTEMS FOR AUTOMATIC SHUT-OFF VALVES |
EN 60947-5-2:2007/A1:2012
|
LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-2: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - PROXIMITY SWITCHES (IEC 60947-5-2:2007/A1:2012) |
BS EN 62026-2:2013
|
Low-voltage switchgear and controlgear. Controller-device interfaces (CDIs) Actuator sensor interface (AS-i) |
UNI EN 12952-11 : 2007
|
WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 11: REQUIREMENTS FOR LIMITING DEVICES OF THE BOILER AND ACCESSORIES |
BS EN 61000-4-18 : 2007
|
ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-18: TESTING AND MEASUREMENT TECHNIQUES - DAMPED OSCILLATORY WAVE IMMUNITY TEST |
IEEE C37.90.1-2012 REDLINE
|
IEEE Standard for Surge Withstand Capability (SWC) Tests for Relays and Relay Systems Associated with Electric Power Apparatus |
API STD 17F : 2017
|
SUBSEA PRODUCTION CONTROL SYSTEMS |
EN 230:2005
|
Automatic burner control systems for oil burners |
UNI EN 1854 : 2010
|
PRESSURE SENSING DEVICES FOR GAS BURNERS AND GAS BURNING APPLIANCES |
EN 62920:2017
|
Photovoltaic power generating systems - EMC requirements and test methods for power conversion equipment |
MIL-PRF-28800 Revision F:1996
|
TEST EQUIPMENT FOR USE WITH ELECTRICAL AND ELECTRONIC EQUIPMENT, GENERAL SPECIFICATION FOR |
EN 61779-1 : 2000 AMD 11 2004
|
ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF FLAMMABLE GASES - PART 1: GENERAL REQUIREMENTS AND TEST METHODS |
EN 50130-4:2011/A1:2014
|
ALARM SYSTEMS - PART 4: ELECTROMAGNETIC COMPATIBILITY - PRODUCT FAMILY STANDARD: IMMUNITY REQUIREMENTS FOR COMPONENTS OF FIRE, INTRUDER, HOLD UP, CCTV, ACCESS CONTROL AND SOCIAL ALARM SYSTEMS |
EN 61869-6:2016
|
Instrument transformers - Part 6: Additional general requirements for low-power instrument transformers |
CSA ISO/IEC 18046-2:2013
|
INFORMATION TECHNOLOGY - RADIO FREQUENCY IDENTIFICATION DEVICE PERFORMANCE TEST METHODS - PART 2: TEST METHODS FOR INTERROGATOR PERFORMANCE |
EN 60947-5-3:2013
|
Low-voltage switchgear and controlgear - Part 5-3: Control circuit devices and switching elements - Requirements for proximity devices with defined behaviour under fault conditions (PDDB) |
EN 1760-1:1997+A1:2009
|
Safety of machinery - Pressure sensitive protective devices - Part 1: General principles for the design and testing of pressure sensitive mats and pressure sensitive floors |
UL 60335-1 : 6ED 2016-10
|
SAFETY OF HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - PART 1: GENERAL REQUIREMENTS |
EN 61850-3:2014
|
Communication networks and systems for power utility automation - Part 3: General requirements |
EN 60947-5-1:2017
|
Low-voltage switchgear and controlgear - Part 5-1: Control circuit devices and switching elements - Electromechanical control circuit devices |
EN 63024:2018
|
Requirements for automatic reclosing devices (ARDs) for circuit-breakers, RCBOs and RCCBs for household and similar uses |
IEEE/ANSI N42.38-2015
|
American National Standard for Performance Criteria for Spectroscopy-Based Portal Monitors Used in Homeland Security |
UNI EN 809 : 2009
|
PUMPS AND PUMP UNITS FOR LIQUIDS - COMMON SAFETY REQUIREMENTS |
EN 50121-4:2016
|
Railway applications - Electromagnetic compatibility - Part 4: Emission and immunity of the signalling and telecommunications apparatus |
UNE-EN ISO 13856-3:2013
|
Safety of machinery - Pressure-sensitive protective devices - Part 3: General principles for design and testing of pressure-sensitive bumpers, plates, wires and similar devices (ISO 13856-3:2013) |
EN 50491-5-3:2010
|
General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 5-3: EMC requirements for HBES/BACS used in industry environment |
BS EN 14154-2 : 2005
|
WATER METERS - PART 2: INSTALLATION AND CONDITIONS OF USE |
EN 60325:2004
|
Radiation protection instrumentation - Alpha, beta and alpha/beta (beta energy > 60 keV) contamination meters and monitors |
EN 12470-4:2000+A1:2009
|
Clinical thermometers - Part 4: Performance of electrical thermometers for continuous measurement |
EN 50136-2-1 : 98 AMD 1 2001
|
ALARM SYSTEMS - ALARM TRANSMISSION SYSTEMS AND EQUIPMENT - PART 2-1: GENERAL REQUIREMENTS FOR ALARM TRANSMISSION EQUIPMENT |
EN 55024 : 2010 AMD 1 2015
|
INFORMATION TECHNOLOGY EQUIPMENT - IMMUNITY CHARACTERISTICS - LIMITS AND METHODS OF MEASUREMENT (CISPR 24:2010/A1:2015) |
EN 61000-6-2:2005/corrigendum:2005
|
ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY FOR INDUSTRIAL ENVIRONMENTS (IEC 61000-6-2:2005) |
EN 61131-6:2012
|
Programmable controllers - Part 6: Functional safety |
EN 50325-1:2002
|
Industrial communications subsystem based on ISO 11898 (CAN) for controller-device interfaces - Part 1: General requirements |
EN 61851-21-1:2017/AC:2017-11
|
ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - PART 21-1: ELECTRIC VEHICLE ON-BOARD CHARGER EMC REQUIREMENTS FOR CONDUCTIVE CONNECTION TO AN AC/DC SUPPLY (IEC 61851-21-1:2017) |
EN 60947-3:2009/A2:2015
|
LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 3: SWITCHES, DISCONNECTORS, SWITCH-DISCONNECTORS AND FUSE-COMBINATION UNITS (IEC 60947-3:2008/A2:2015) |
EN 62041:2010
|
Safety of transformers, reactors, power supply units and combinations thereof - EMC requirements |
EN 62488-1:2013
|
Power line communication systems for power utility applications - Part 1: Planning of analogue and digital power line carrier systems operating over EHV/HV/MV electricity grids |
EN 60947-5-9:2007
|
Low-voltage switchgear and controlgear - Part 5-9: Control circuit devices and switching elements - Flow rate switches |
EN 12645:2014
|
Tyre pressure measuring instruments - Devices for inspection of pressure and/or inflation / deflation of tyres for motor vehicles - Metrology, requirements and testing |
EN 62026-7:2013
|
Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 7: CompoNet |
EN 50065-2-2:2003/A1:2005/corrigendum Oct. 2006
|
SIGNALING ON LOW-VOLTAGE ELECTRICAL INSTALLATIONS IN THE FREQUENCY RANGE 3 KHZ TO 148,5 KHZ - PART 2-2: IMMUNITY REQUIREMENTS FOR MAINS COMMUNICATIONS EQUIPMENT AND SYSTEMS OPERATING IN THE RANGE OF FREQUENCIES 95 KHZ TO 148,5 KHZ AND INTENDED FOR USE IN INDUSTRIAL ENVIRONMENTS |
EN 55035:2017
|
Electromagnetic compatibility of multimedia equipment - Immunity requirements |
EN 50121-3-2:2016
|
Railway applications - Electromagnetic compatibility - Part 3-2: Rolling stock - Apparatus |
EN 50463:2007
|
Railway applications - Energy measurement on board trains |
DD IEC/TS 61000-5-8:2009
|
Electromagnetic compatibility (EMC) Installation and mitigation guidelines. HEMP protection methods for the distributed infrastructure |
UNI EN 12405-1 : 2010
|
GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION |
BS EN 14143:2013
|
Respiratory equipment. Self-contained re-breathing diving apparatus |
SAE J 2894/2 : 2015
|
POWER QUALITY TEST PROCEDURES FOR PLUG-IN ELECTRIC VEHICLE CHARGERS |
EN 62343-2:2014
|
Dynamic modules - Part 2: Reliability qualification |
EN 14846:2008
|
Building hardware - Locks and latches - Electromechanically operated locks and striking plates - Requirements and test methods |
EN ISO 13628-6:2006
|
Petroleum and natural gas industries - Design and operation of subsea production systems - Part 6: Subsea production control systems (ISO 13628-6:2006) |
EN 12953-9:2007
|
Shell boilers - Part 9: Requirements for limiting devices of the boiler and accessories |
EN 55014-2:2015
|
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2: Immunity - Product family standard |
EN 60439-1:1999/A1:2004
|
LOW VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1 - TYPE TESTED AND PARTIALLY TYPE TESTED ASSEMBLIES |
UNE-EN 61000-6-7:2015
|
Electromagnetic compatibility (EMC) - Part 6-7: Generic standards - Immunity requirements for equipment intended to perform functions in a safety-related system (functional safety) in industrial locations |
UNE-EN 1643:2014
|
Safety and control devices for gas burners and gas burning appliances - Valve proving systems for automatic shut-off valves |
EN 809 : 1998 COR 2010
|
PUMPS AND PUMP UNITS FOR LIQUIDS - COMMON SAFETY REQUIREMENTS |
EN 61496-1:2013/AC:2015
|
SAFETY OF MACHINERY - ELECTRO-SENSITIVE PROTECTIVE EQUIPMENT - PART 1: GENERAL REQUIREMENTS AND TESTS (IEC 61496-1:2012) |
BS IEC 60747-14-4:2011
|
Semiconductor devices. Discrete devices Semiconductor accelerometers |
UNE-EN 61786-1:2014
|
Measurement of DC magnetic, AC magnetic and AC electric fields from 1 Hz to 100 kHz with regard to exposure of human beings - Part 1: Requirements for measuring instruments |
UNI EN 12645 : 2014
|
TYRE PRESSURE MEASURING INSTRUMENTS - DEVICES FOR INSPECTION OF PRESSURE AND/OR INFLATION/DEFLATION OF TYRES FOR MOTOR VEHICLES - METROLOGY, REQUIREMENTS AND TESTING |
EN 60204-31:2013
|
Safety of machinery - Electrical equipment of machines - Part 31: Particular safety and EMC requirements for sewing machines, units and systems |
BS EN 1760-1 : 1998
|
SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 1: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE MATS AND PRESSURE SENSITIVE FLOORS |
EN 62135-2:2015
|
Resistance welding equipment - Part 2: Electromagnetic compatibility (EMC) requirements |
BS EN 61000-4-25 : 2002
|
ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-25: TESTING AND MEASUREMENT TECHNIQUES - HEMP IMMUNITY TEST METHODS FOR EQUIPMENT AND SYSTEMS |
EN 60255-26:2013/AC:2013
|
MEASURING RELAYS AND PROTECTION EQUIPMENT - PART 26: ELECTROMAGNETIC COMPATIBILITY REQUIREMENTS |
CAN/CSA-IEC 61000-6-5:18
|
Electromagnetic compatibility (EMC) ? Part 6-5: Generic standards ? Immunity for equipment used in power station and substation environment (Adopted IEC 61000-6-5:2015, first edition, 2015-08) | Compatibilité électromagnétique (CEM) ? Partie 6-5 : Normes génériques ? Immunité pour les équipements utilisés dans les environnements de centrales électriques et de postes (norme IEC 61000-6-5:2015 adoptée, première édition, 2015-08) |
EN 61326-1:2013
|
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General requirements |
CSA IEC 61000-6-2 : 2008
|
ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY FOR INDUSTRIAL ENVIRONMENTS |
EN 12952-11:2007
|
Water-tube boilers and auxiliary installations - Part 11: Requirements for limiting devices of the boiler and accessories |
EN 61514:2002
|
Industrial-process control systems - Methods of evaluating the performance of valve positioners with pneumatic outputs |
EN 60580:2000
|
Medical electrical equipment - Dose area product meters |
EN 809:1998+A1:2009
|
Pumps and pump units for liquids - Common safety requirements |
BS EN 1760-2 : 2001
|
SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 2: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE EDGES AND PRESSURE SENSITIVE BARS |
EN 60947-8:2003/A2:2012
|
LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 8: CONTROL UNITS FOR BUILT-IN THERMAL PROTECTION (PTC) FOR ROTATING ELECTRICAL MACHINES (IEC 60947-8:2003/A2:2011) |
EN 60730-1:2016
|
Automatic electrical controls - Part 1: General requirements |
EN 50090-2-2:1996/A2:2007
|
HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) - PART 2-2: SYSTEM OVERVIEW - GENERAL TECHNICAL REQUIREMENTS |
EN 60846:2004
|
Radiation protection instrumentation - Ambient and/or directional dose equivalent (rate) meters and/or monitors for beta, X and gamma radiation |
PD IEC/TR 60601-4-2:2016
|
MEDICAL ELECTRICAL EQUIPMENT - PART 4-2: GUIDANCE AND INTERPRETATION - ELECTROMAGNETIC IMMUNITY: PERFORMANCE OF MEDICAL ELECTRICAL EQUIPMENT AND MEDICAL ELECTRICAL SYSTEMS |
BS IEC 62463:2010 (published 2010-07)
|
Radiation protection instrumentation. X-ray systems for the screening of persons for security and the carrying of illicit items |
BS EN 61800-3 : 2004
|
ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 3: EMC REQUIREMENTS AND SPECIFIC TEST METHODS |
EN ISO 10440-2:2001
|
Petroleum and natural gas industries - Rotary-type positive-displacement compressors - Part 2: Packaged air compressors (oil-free) (ISO 10440-2:2001) |
EN 50270:2015
|
Electromagnetic compatibility - Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen |
EN 60669-2-5:2016
|
Switches for household and similar fixed electrical installations - Part 2-5: Particular requirements - Switches and related accessories for use in home and building electronic systems (HBES) |
PD CLC/TR 62685:2011
|
Industrial communication networks. Profiles. Assessment guideline for safety devices using IEC 61784-3 functional safety communication profiles (FSCPs) |
A-A-58047 Revision D:2016
|
SIGNAL GENERATOR |
EN 14908-2:2014
|
Open Data Communication in Building Automation, Controls and Building Management - Control Network Protocol - Part 2: Twisted Pair Communication |
EN 50065-2-3 : 2003 AMD 1 2005
|
SIGNALLING ON LOW-VOLTAGE ELECTRICAL INSTALLATIONS IN THE FREQUENCY RANGE 3 KHZ TO 148.5 KHZ - PART 2-3: IMMUNITY REQUIREMENTS FOR MAINS COMMUNICATIONS EQUIPMENT AND SYSTEMS OPERATING IN THE RANGE OF FREQUENCIES 3 KHZ TO 95 KHZ AND INTENDED FOR USE BY ELECTRICITY SUPPLIERS AND DISTRIBUTORS |
EN 61069-1:2016
|
Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 1: Terminology and basic concepts |
EN 60770-1:2011
|
Transmitters for use in industrial-process control systems - Part 1: Methods for performance evaluation |
EN 62026-2:2013
|
Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 2: Actuator sensor interface (AS-i) |
EN 60934:2001/A2:2013
|
CIRCUIT BREAKERS FOR EQUIPMENT (CBE) (IEC 60934:2000/A2:2013) |
EN 62606:2013/A1:2017
|
GENERAL REQUIREMENTS FOR ARC FAULT DETECTION DEVICES (IEC 62606:2013/A1:2017) |
EN 61326:1997/A3:2003
|
|
EN 62052-11:2003/A1:2017/AC:2018-04
|
ELECTRICITY METERING EQUIPMENT (AC) - GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - PART 11: METERING EQUIPMENT (IEC 62052-11:2003/A1:2016/COR1:2018) |
CEN ISO/TS 14907-1:2015
|
Electronic fee collection - Test procedures for user and fixed equipment - Part 1: Description of test procedures (ISO/TS 14907-1:2015) |
UNE-EN 50293:2013
|
Road traffic signal systems - Electromagnetic compatibility |
I.S. EN 50325-1:2002
|
INDUSTRIAL COMMUNICATIONS SUBSYSTEM BASED ON ISO 11898 (CAN) FOR CONTROLLER-DEVICE INTERFACES - PART 1: GENERAL REQUIREMENTS |
EN 50412-2-1 : 2005 COR 2009
|
POWER LINE COMMUNICATION APPARATUS AND SYSTEMS USED IN LOW-VOLTAGE INSTALLATIONS IN THE FREQUENCY RANGE 1,6 MHZ TO 30 MHZ - PART 2-1: RESIDENTIAL, COMMERCIAL AND INDUSTRIAL ENVIRONMENT - IMMUNITY REQUIREMENTS |
EN 60947-4-1 : 2010 AMD 1 2012
|
LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4-1: CONTACTORS AND MOTOR-STARTERS - ELECTROMECHANICAL CONTACTORS AND MOTOR-STARTERS (IEC 60947-4-1:2009/A1:2012) |
EN 50065-2-1 : 2003 AMD 1 2005
|
SIGNALLING ON LOW-VOLTAGE ELECTRICAL INSTALLATIONS IN THE FREQUENCY RANGE 3 KHZ TO 148,5 KHZ - PART 2-1: IMMUNITY REQUIREMENTS FOR MAINS COMMUNICATIONS EQUIPMENT AND SYSTEMS OPERATING IN THE RANGE OF FREQUENCIES 95 KHZ TO 148,5 KHZ AND INTENDED FOR USE IN RESIDENTIAL, COMMERCIAL AND LIGHT INDUSTRIAL ENVIRONMENTS |
EN 60268-4:2014
|
Sound system equipment - Part 4: Microphones |
EN 61439-1:2011
|
Low-voltage switchgear and controlgear assemblies - Part 1: General rules |
EN 60694:1996/A2:2001
|
COMMON SPECIFICATIONS FOR HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR STANDARDS |
EN 61812-1:2011
|
Time relays for industrial and residential use - Part 1: Requirements and tests |
EN 50082-2 : 95 AC 95
|
ELECTROMAGNETIC COMPATIBILITY - GENERIC IMMUNITY STANDARD - INDUSTRIAL ENVIRONMENT |
EN 1760-2:2001+A1:2009
|
Safety of machinery - Pressure sensitive protective devices - Part 2: General principles for the design and testing of pressure sensitive edges and pressure sensitive bars |
EN 61526:2013
|
Radiation protection instrumentation - Measurement of personal dose equivalents Hp(10) and Hp(0,07) for X, gamma, neutron and beta radiations - Direct reading personal dose equivalent meters |
EN 60947-2:2017
|
Low-voltage switchgear and controlgear - Part 2: Circuit-breakers |
EN 61676:2002/A1:2009
|
MEDICAL ELECTRICAL EQUIPMENT - DOSIMETRIC INSTRUMENTS USED FOR NON-INVASIVE MEASUREMENT OF X-RAY TUBE VOLTAGE IN DIAGNOSTIC RADIOLOGY |
EN 60861:2008
|
Equipment for monitoring of radionuclides in liquid effluents and surface waters |
EN 62026-1:2007
|
Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 1: General rules |
TS 137 113 : 13.1.0
|
DIGITAL CELLULAR TELECOMMUNICATIONS SYSTEM (PHASE 2+) (GSM); UNIVERSAL MOBILE TELECOMMUNICATIONS SYSTEM (UMTS); LTE; E-UTRA, UTRA AND GSM/EDGE; MULTI-STANDARD RADIO (MSR) BASE STATION (BS) ELECTROMAGNETIC COMPATIBILITY (EMC) (3GPP TS 37.113 VERSION 14.2.0 RELEASE 14) |
CEI EN 55035 : 2018
|
ELECTROMAGNETIC COMPATIBILITY OF MULTIMEDIA EQUIPMENT - IMMUNITY REQUIREMENTS |
EN 61298-3:2008
|
Process measurement and control devices - General methods and procedures for evaluating performance - Part 3: Tests for the effects of influence quantities |
EN 61674:2013
|
Medical electrical equipment - Dosimeters with ionization chambers and/or semiconductor detectors as used in X-ray diagnostic imaging |
CEI EN 62841-1 : 2016
|
ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
UNI EN 298 : 2012
|
AUTOMATIC BURNER CONTROL SYSTEMS FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS |
EN 61800-3 : 2004 AMD 1 2012
|
ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 3: EMC REQUIREMENTS AND SPECIFIC TEST METHODS (IEC 61800-3:2004/A1:2011) |
CLC/TR 50450:2006
|
Resistibility requirements for equipment having (a) telecommunication port(s) |
EN 50490:2008
|
Electrical installations for lighting and beaconing of aerodromes - Technical requirements for aeronautical ground lighting control and monitoring systems - Units for selective switching and monitoring of individual lamps |
BS EN 60580:2000
|
Dose area product meters |
EN 61918:2013/AC:2014
|
INDUSTRIAL COMMUNICATION NETWORKS - INSTALLATION OF COMMUNICATION NETWORKS IN INDUSTRIAL PREMISES (IEC 61918:2013, MODIFIED) |
EN 60335-1:2012/A13:2017
|
HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60335-1:2010, MODIFIED) |
EN 50491-5-1:2010
|
General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 5-1: EMC requirements, conditions and test set-up |
EN 50491-5-2:2010
|
General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 5-2: EMC requirements for HBES/BACS used in residential, commercial and light industry environment |
EN 62310-2:2007
|
Static transfer systems (STS) - Part 2: Electromagnetic compatibility (EMC) requirements |
CLC/TS 62603-1:2014
|
Industrial process control systems - Guideline for evaluating process control systems - Part 1: Specifications |
I.S. EN 60947-5-2:2008
|
LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-2: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - PROXIMITY SWITCHES (IEC 60947-5-2:2007 (EQV)) |
CSA IEC 61000-6-2 : 2008 : R2013
|
ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY FOR INDUSTRIAL ENVIRONMENTS |
EN 61000-6-5:2015/AC:2018-01
|
ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-5: GENERIC STANDARDS - IMMUNITY FOR EQUIPMENT USED IN POWER STATION AND SUBSTATION ENVIRONMENT (IEC 61000-6-5:2015/COR1:2017) |
EN 62080:2009/A2:2015
|
SOUND SIGNALLING DEVICES FOR HOUSEHOLD AND SIMILAR PURPOSES (IEC 62080:2001/A2:2015) |
EN 62689-1:2016
|
Current and voltage sensors or detectors, to be used for fault passage indication purposes - Part 1: General principles and requirements |
EN 61800-5-2:2017
|
Adjustable speed electrical power drive systems - Part 5-2: Safety requirements - Functional |
EN 62534:2015
|
Radiation protection instrumentation - Highly sensitive hand-held instruments for neutron detection of radioactive material |
EN 61543:1995/A2:2006
|
RESIDUAL CURRENT-OPERATED PROTECTIVE DEVICES (RCDS) FOR HOUSEHOLD AND SIMILAR USE - ELECTROMAGNETIC COMPATIBILITY |
EN 50470-1:2006
|
Electricity metering equipment (a.c.) - Part 1: General requirements, tests and test conditions - Metering equipment (class indexes A, B and C) |
EN 60947-6-1:2005/A1:2014
|
LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 6-1: MULTIPLE FUNCTION EQUIPMENT - TRANSFER SWITCHING EQUIPMENT (IEC 60947-6-1:2005/A1:2013) |
EN 61158-2:2014
|
Industrial communication networks - Fieldbus specifications - Part 2: Physical layer specification and service definition |
EN 60945:2002
|
Maritime navigation and radiocommunication equipment and systems - General requirements - Methods of testing and required test results |
EN 61000-4-1:2007
|
Electromagnetic compatibility (EMC) - Part 4-1: Testing and measurement techniques - Overview of IEC 61000-4 series |
EN 61000-6-1:2007
|
Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity for residential, commercial and light-industrial environments |
UNE-EN 50065-2-3:2004
|
Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz -- Part 2-3: Immunity requirements for mains communications equipment and systems operating in the range of frequencies 3 kHz to 95 kHz and intended for use by electricity suppliers and distributors |
IEC 62236-3-2:2018
|
Railway applications - Electromagnetic compatibility - Part 3-2: Rolling stock - Apparatus |
IEC 60694:1996+AMD1:2000+AMD2:2001 CSV
|
Common specifications for high-voltage switchgear and controlgear standards |
UNE-EN 60730-1:2013
|
Automatic electrical controls for household and similar use - Part 1: General requirements |
IEC 60439-1:1999+AMD1:2004 CSV
|
Low-voltage switchgear and controlgear assemblies - Part 1: Type-tested and partially type-tested assemblies |
IEC TR 61000-2-5:2017
|
Electromagnetic compatibility (EMC) - Part 2-5: Environment - Description and classification of electromagnetic environments |
IEC 62083:2009
|
Medical electrical equipment - Requirements for the safety of radiotherapy treatment planning systems |
IEC 60947-5-3:2013
|
Low-voltage switchgear and controlgear - Part 5-3: Control circuit devices and switching elements - Requirements for proximity devices with defined behaviour under fault conditions (PDDB) |
IEC 60947-1:2007+AMD1:2010+AMD2:2014 CSV
|
Low-voltage switchgear and controlgear - Part 1: General rules |
IEC TS 62257-3:2015
|
Recommendations for renewable energy and hybrid systems for rural electrification - Part 3: Project development and management |
IEC TR 62685:2010
|
Industrial communication networks - Profiles - Assessment guideline for safety devices using IEC 61784-3 functional safety communication profiles (FSCPs) |
ISO/IEC 18046-2:2011
|
Information technology Radio frequency identification device performance test methods Part 2: Test methods for interrogator performance |
IEC 60601-1-2:2007
|
Medical electrical equipment - Part 1-2: General requirements for basic safety and essential performance - Collateral standard: Electromagnetic compatibility - Requirements and tests |
IEC 63044-5-3:2017
|
Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 5-3: EMC requirements for HBES/BACS used in industrial environments |
ISO/IEC 14908-2:2012
|
Information technology — Control network protocol — Part 2: Twisted pair communication |
DIN EN 1643:2001-02
|
SAFETY AND CONTROL DEVICES FOR GAS BURNERS AND GAS BURNING APPLIANCES - VALVE PROVING SYSTEMS FOR AUTOMATIC SHUT-OFF VALVES |
BS EN 61800-5-2:2017
|
Adjustable speed electrical power drive systems Safety requirements. Functional |
IEC 62080:2001+AMD1:2008+AMD2:2015 CSV
|
Sound signalling devices for household and similar purposes |
IEC 61298-3:2008
|
Process measurement and control devices - General methods and procedures for evaluating performance - Part 3: Tests for the effects of influence quantities |
IEC 61800-3:2017
|
Adjustable speed electrical power drive systems - Part 3: EMC requirements and specific test methods |
IEC 61204-3:2016 RLV
|
Low-voltage switch mode power supplies - Part 3: Electromagnetic compatibility (EMC) |
BS EN 60730-1:2011
|
Automatic electrical controls for household and similar use General requirements |
BS EN 60947-2:2017
|
Low-voltage switchgear and controlgear Circuit-breakers |
IEC 61757:2018
|
Fibre optic sensors - Generic specification |
IEC 60532:2010
|
Radiation protection instrumentation - Installed dose rate meters, warning assemblies and monitors - X and gamma radiation of energy between 50 keV and 7 MeV |
IEC 60044-8:2002
|
Instrument transformers - Part 8: Electronic current transformers |
UNE-EN 62080:2010
|
Sound signalling devices for household and similar purposes |
IEC 62026-2:2008
|
Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 2: Actuator sensor interface (AS-i) |
DIN EN 12470-4:2009-11
|
CLINICAL THERMOMETERS - PART 4: PERFORMANCE OF ELECTRICAL THERMOMETERS FOR CONTINUOUS MEASUREMENT |
CSA C22.2 NO. 60947-4-2:14 (R2019)
|
Low-voltage switchgear and controlgear - Part 4-2: Contactors and motor-starters - AC semiconductor motor controllers and starters ( Bi-national standard, with UL 60947-4-2) |
CSA C22.2 NO. 60947-5-1:14 (R2019)
|
Low-voltage switchgear and controlgear - Part 5-1: Control circuit devices and switching elements - Electromechanical control circuit devices (Bi-national standard, with UL 60947-5-1) |
EN ISO 13856-3:2013
|
Safety of machinery - Pressure-sensitive protective devices - Part 3: General principles for design and testing of pressure-sensitive bumpers, plates, wires and similar devices (ISO 13856-3:2013) |
BS EN 62920:2017
|
Photovoltaic power generating systems. EMC requirements and test methods for power conversion equipment |
I.S. EN 62841-1:2015
|
ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
BS EN 60204-31:2013
|
Safety of machinery. Electrical equipment of machines Particular safety and EMC requirements for sewing machines, units and systems |
CSA C22.2 No. 112 : 2015
|
ELECTRIC CLOTHES DRYERS |
IEC 61058-1:2016
|
Switches for appliances - Part 1: General requirements |
IEC 61000-4-18:2006+AMD1:2010 CSV
|
Electromagnetic compatibility (EMC) - Part 4-18: Testing and measurement techniques - Damped oscillatory wave immunity test |
IEC 60730-2-19:1997+AMD1:2000+AMD2:2007 CSV
|
Automatic electrical controls for household and similar use - Part 2-19: Particular requirements for electrically operated oil valves, including mechanical requirements |
ISO 4064-2:2014
|
Water meters for cold potable water and hot water Part 2: Test methods |
UNE-EN 55103-2:2010
|
Electromagnetic compatibility - Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use - Part 2: Immunity |
BS IEC 60532:2010
|
RADIATION PROTECTION INSTRUMENTATION - INSTALLED DOSE RATE METERS, WARNING ASSEMBLIES AND MONITORS - X AND GAMMA RADIATION OF ENERGY BETWEEN 50 KEV AND 7 MEV |
BS EN 62534:2015
|
RADIATION PROTECTION INSTRUMENTATION - HIGHLY SENSITIVE HAND-HELD INSTRUMENTS FOR NEUTRON DETECTION OF RADIOACTIVE MATERIAL |
BS EN 50325-2:2001
|
INDUSTRIAL COMMUNICATIONS SUBSYSTEM BASED ON ISO 11898 (CAN) FOR CONTROLLER-DEVICE INTERFACES - PART 2: DEVICENET |
EN 1300:2013
|
Secure storage units - Classification for high security locks according to their resistance to unauthorized opening |
BS IEC 61559-1:2009
|
RADIATION PROTECTION INSTRUMENTATION IN NUCLEAR FACILITIES - CENTRALIZED SYSTEMS FOR CONTINUOUS MONITORING OF RADIATION AND/OR LEVELS OF RADIOACTIVITY - PART 1: GENERAL REQUIREMENTS |
UNE-EN 50121-5:2018
|
Railway applications - Electromagnetic compatibility - Part 5: Emission and immunity of fixed power supply installations and apparatus |
BS EN 62026-7:2013
|
Low-voltage switchgear and controlgear. Controller-device interfaces (CDIs) CompoNet |
BS EN 61851-21-1:2017
|
Electric vehicle conductive charging system Electric vehicle on-board charger EMC requirements for conductive connection to an AC/DC supply |
BS EN 61513:2013
|
Nuclear power plants. Instrumentation and control important to safety. General requirements for systems |
CSA C22.2 NO. 60947-4-1:14 (R2019)
|
Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters ( Bi-national standard, with UL 60947-4-1) |
BS ISO 16437:2012
|
SHIPS AND MARINE TECHNOLOGY - LIFESAVING AND FIRE PROTECTION - ATMOSPHERIC OIL MIST DETECTORS FOR SHIPS |
BS ISO 17089-1:2019
|
MEASUREMENT OF FLUID FLOW IN CLOSED CONDUITS - ULTRASONIC METERS FOR GAS - PART 1: METERS FOR CUSTODY TRANSFER AND ALLOCATION MEASUREMENT |
VDI/VDE 2185 Blatt 1:2007-09
|
Radio based communication in industrial automation |
DIN EN 1760-1:2009-08
|
SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 1: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE MATS AND PRESSURE SENSITIVE FLOORS |
DIN EN ISO 13856-1:2013-08
|
SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 1: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE-SENSITIVE MATS AND PRESSURE-SENSITIVE FLOORS (ISO 13856-1:2013) |
BIS IS/IEC 61058-1 : 2000(R2007)
|
SWITCHES FOR APPLIANCES - PART 1: GENERAL REQUIREMENTS |
BIS IS 13947-5-2 : 2004
|
LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - SPECIFICATION - PART 5: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - SECTION 2: PROXIMITY SWITCHES |
BIS IS/IEC 60947-4-3 : 1999
|
LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4: CONTACTORS AND MOTOR-STARTERS - SECTION 3: AC SEMICONDUCTOR CONTROLLERS AND CONTACTORS FOR NON-MOTOR LOADS |
BS EN 61496-1:2013
|
Safety of machinery. Electro-sensitive protective equipment General requirements and tests |
BS EN 62310-2:2007
|
STATIC TRANSFER SYSTEMS (STS) - PART 2: ELECTROMAGNETIC COMPATIBILITY (EMC) REQUIREMENTS |
DIN EN 1643:2014-09
|
SAFETY AND CONTROL DEVICES FOR GAS BURNERS AND GAS BURNING APPLIANCES - VALVE PROVING SYSTEMS FOR AUTOMATIC SHUT-OFF VALVES |
IEC 63024:2017
|
Requirements for automatic reclosing devices (ARDs) for circuit breakers, RCBOs-RCCBs for household and similar uses |
CISPR 24:2010+AMD1:2015 CSV
|
Information technology equipment - Immunity characteristics - Limitsand methods of measurement |
BS EN 61158-2:2014
|
Industrial communication networks. Fieldbus specifications Physical layer specification and service definition |
BS IEC 61017:2016
|
RADIATION PROTECTION INSTRUMENTATION - TRANSPORTABLE, MOBILE OR INSTALLED EQUIPMENT TO MEASURE PHOTON RADIATION FOR ENVIRONMENTAL MONITORING |
ISO 10440-2:2001
|
Petroleum and natural gas industries Rotary-type positive-displacement compressors Part 2: Packaged air compressors (oil-free) |
BS EN 50293:2012
|
ROAD TRAFFIC SIGNAL SYSTEMS - ELECTROMAGNETIC COMPATIBILITY |
IEC 60947-6-2:2002+AMD1:2007 CSV
|
Low-voltage switchgear and controlgear - Part 6-2: Multiple function equipment - Control and protective switching devices (or equipment) (CPS) |
IEC 60730-2-17:1997+AMD1:2000+AMD2:2007 CSV
|
Automatic electrical controls for household and similar use - Part 2-17: Particular requirements for electrically operated gas valves, including mechanical requirements |
IEC 61058-2-4:1995+AMD1:2003 CSV
|
Switches for appliances - Part 2-4: Particular requirements for independently mounted switches |
IEC 61158-2:2014
|
Industrial communication networks - Fieldbus specifications - Part 2: Physical layer specification and service definition |
IEC 62022:2004
|
Installed monitors for the control and detection of gamma radiations contained in recyclable or non-recyclable materials transported by vehicles |
IEC 60533:2015
|
Electrical and electronic installations in ships - Electromagnetic compatibility (EMC) - Ships with a metallic hull |
BS EN 60770-1:1999
|
TRANSMITTERS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS - PART 1: METHODS FOR PERFORMANCE EVALUATION |
BS EN 50491-5-2:2010
|
General requirements for home and building electronic systems (HBES) and building automation and control systems (BACS) EMC requirements for HBES/BACS used in residential, commercial and light industry environment |
BS EN 60255-22-4:2008
|
MEASURING RELAYS AND PROTECTION EQUIPMENT - PART 22-4: ELECTRICAL DISTURBANCE TESTS - ELECTRICAL FAST TRANSIENT/BURST IMMUNITY TEST |
IEC 60870-2-1:1995
|
Telecontrol equipment and systems - Part 2: Operating conditions - Section 1: Power supply and electromagnetic compatibility |
IEC 60747-14-4:2011
|
Semiconductor devices - Discrete devices - Part 14-4: Semiconductor accelerometers |
BS EN 61204-3:2001
|
Low voltage power supplies, d.c. output Electromagnetic compatibility (EMC) |
IEEE C62.42-2005
|
APPLICATION OF COMPONENT SURGE-PROTECTIVE DEVICES FOR USE IN LOW-VOLTAGE [EQUAL TO OR LESS THAN 1000 V (AC) OR 1200 V (DC)] CIRCUITS |
ISO/TS 14907-1:2015
|
Electronic fee collection Test procedures for user and fixed equipment Part 1: Description of test procedures |
BS EN 61812-1:2011
|
Time relays for industrial and residential use Requirements and tests |
BS EN 61851-22:2002
|
ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - AC ELECTRIC VEHICLE CHARGING STATION |
BS EN 60694:1997
|
Common specifications for high-voltage switchgear and controlgear standards |
IEC 61800-5-2:2016 RLV
|
Adjustable speed electrical power drive systems - Part 5-2: Safety requirements - Functional |
IEC 62215-3:2013
|
Integrated circuits - Measurement of impulse immunity - Part 3: Non-synchronous transient injection method |
IEC 62599-2:2010
|
Alarm systems - Part 2: Electromagnetic compatibility - Immunity requirements for components of fire and security alarm systems |
IEC 60092-504:2016
|
Electrical installations in ships - Part 504: Automation, control and instrumentation |
IEC 61017:2016
|
Radiation protection instrumentation - Transportable, mobile or installed equipment to measure photon radiation for environmental monitoring |
IEC TR 61000-4-1:2016
|
Electromagnetic compatibility (EMC) - Part 4-1: Testing and measurement techniques - Overview of IEC 61000-4 series |
PD ISO/TR 18569:2004
|
Safety of machinery. Guidelines for the understanding and use of safety of machinery standards. |
IEC 61496-1:2012
|
Safety of machinery - Electro-sensitive protective equipment - Part 1: General requirements and tests |
BS EN 60947-8:2003
|
LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 8: CONTROL UNITS FOR BUILT-IN THERMAL PROTECTION (PTC) FOR ROTATING ELECTRICAL MACHINES |
IEC 61851-21-1:2017
|
Electric vehicle conductive charging system - Part 21-1 Electric vehicle on-board charger EMC requirements for conductive connection to AC/DC supply |
IEC 61000-4-36:2014
|
Electromagnetic compatibility (EMC) - Part 4-36: Testing and measurement techniques - IEMI immunity test methods for equipment and systems |
IEC 61066:2006
|
Thermoluminescence dosimetry systems for personal and environmental monitoring |
IEC 62244:2006
|
Radiation protection instrumentation - Installed radiation monitors for the detection of radioactive and special nuclear materials at national borders |
IEC 62343-2:2014
|
Dynamic modules - Part 2: Reliability qualification |
IEC 62115:2017
|
Electric toys - Safety |
BS EN 62040-2:2006
|
Uninterruptible power systems (UPS) Electromagnetic compatibility (EMC) requirements |
BS IEC 62003:2009
|
NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL IMPORTANT TO SAFETY - REQUIREMENTS FOR ELECTROMAGNETIC COMPATIBILITY TESTING |
DD ENV 1300:1999
|
SECURE STORAGE UNITS - CLASSIFICATION FOR HIGH SECURITY LOCKS ACCORDING TO THEIR RESISTANCE TO UNAUTHORIZED OPENING |
BS EN 60846:2004
|
RADIATION PROTECTION INSTRUMENTATION - AMBIENT AND/OR DIRECTIONAL DOSE EQUIVALENT (RATE) METERS AND/OR MONITORS FOR BETA, X AND GAMMA RADIATION |
BS EN 50491-5-3:2010
|
General requirements for home and building electronic systems (HBES) and building automation and control systems (BACS) EMC requirements for HBES/BACS used in industry environment |
DIN EN 14846:2015-07 (Draft)
|
BUILDING HARDWARE - LOCKS AND LATCHES - ELECTROMECHANICALLY OPERATED LOCKS AND STRIKING PLATES - REQUIREMENTS AND TEST METHODS |
IEC TR 62066:2002
|
Surge overvoltages and surge protection in low-voltage a.c. power systems - General basic information |
BS EN 60947-3 : 2009
|
LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 3: SWITCHES, DISCONNECTORS, SWITCH-DISCONNECTORS AND FUSE-COMBINATION UNITS |
BS EN 61036:1997
|
ALTERNATING CURRENT STATIC WATT-HOUR METERS FOR ACTIVE ENERGY (CLASSES 1 AND 2) |
BS IEC 60325:2002
|
Radiation protection instrumentation. Alpha, beta and alpha/beta (beta energy > 60 keV) contamination meters and monitors |
BS EN 61038:1993
|
ELECTRICITY METERING - TARIFF AND LOAD CONTROLS - PARTICULAR REQUIREMENTS FOR TIME SWITCHES |
IEC 62689-1:2016
|
Current and voltage sensors or detectors, to be used for fault passage indication purposes - Part 1: General principles and requirements |
IEC 61851-22:2001
|
Electric vehicle conductive charging system - Part 22: AC electric vehicle charging station |
BS ISO 11614:1999
|
RECIPROCATING INTERNAL COMBUSTION COMPRESSION-IGNITION ENGINES - APPARATUS FOR MEASUREMENT OF THE OPACITY AND FOR DETERMINATION OF THE LIGHT ABSORPTION COEFFICIENT OF EXHAUST GAS |
BS EN 50065-2-1:2003
|
Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz Immunity requirements for mains communications equipment and systems operating in the range of frequencies 95 kHz to 148,5 kHz and intended for use in residential, commercial and light industrial environments |
IEC 61204-3:2016
|
Low-voltage switch mode power supplies - Part 3: Electromagnetic compatibility (EMC) |
ISO 16437:2012
|
Ships and marine technology - Lifesaving and fire protection Atmospheric oil mist detectors for ships |
BS EN 60325:2004 (published 2004-09)
|
Radiation protection instrumentation. Alpha, beta and alpha/beta (beta energy > 60 keV) contamination meters and monitors |
BS EN 62080 : 2009
|
SOUND SIGNALLING DEVICES FOR HOUSEHOLD AND SIMILAR PURPOSES |
BS IEC 60533:2015
|
Electrical and electronic installations in ships. Electromagnetic compatibility (EMC). Ships with a metallic hull |
I.S. EN 1434-4:2015
|
HEAT METERS - PART 4: PATTERN APPROVAL TESTS |
CSA C22.2 No. 61058.1 : 2009 : INC : UPD 1 : 2013
|
SWITCHES FOR APPLIANCES - PART 1: GENERAL REQUIREMENTS |
CSA C22.2 No. 60335-1:2011
|
SAFETY OF HOUSEHOLD AND SIMILAR APPLIANCES - PART 1: GENERAL REQUIREMENTS |
UNI EN 1106 : 2010
|
MANUALLY OPERATED TAPS FOR GAS BURNING APPLIANCES |
IEC 60669-2-1:2002+AMD1:2008+AMD2:2015 CSV
|
Switches for household and similar fixed electrical installations -Part 2-1: Particular requirements - Electronic switches |
BS EN 61439-1:2011
|
Low-voltage switchgear and controlgear assemblies General rules |
BS EN 62387:2016
|
Radiation protection instrumentation. Passive integrating dosimetry systems for individual, workplace and environmental monitoring of photon and beta radiation |
DIN EN 12953-9:2007-09
|
Shell boilers - Part 9: Requirements for limiting devices of the boiler and accessories |
CSA C22.2 No. 281.2:2012
|
STANDARD FOR SAFETY FOR PERSONNEL PROTECTION SYSTEMS FOR ELECTRIC VEHICLE (EV) SUPPLY CIRCUITS: PARTICULAR REQUIREMENTS FOR PROTECTION DEVICES FOR USE IN CHARGING SYSTEMS |
UNE-EN 50557:2012
|
Requirements for automatic reclosing devices (ARDs) for circuit breakers-RCBOs-RCCBs for household and similar uses |
BS EN 62083:2009 (published 2010-03)
|
Medical electrical equipment. Requirements for the safety of radiotherapy treatment planning systems |
PD IEC TR 61000-5-6:2002
|
Electromagnetic compatibility (EMC). Installation and mitigation guidelines Mitigation of external EM influences |
BS EN 14846:2008
|
BUILDING HARDWARE - LOCKS AND LATCHES - ELECTROMECHANICALLY OPERATED LOCKS AND STRIKING PLATES - REQUIREMENTS AND TEST METHODS |
BS EN 62282-3-201:2017
|
Fuel cell technologies Stationary fuel cell power systems. Performance test methods for small fuel cell power systems |
IEC 62003:2009
|
Nuclear power plants - Instrumentation and control important to safety - Requirements for electromagnetic compatibility testing |
IEC 61674:2012
|
Medical electrical equipment - Dosimeters with ionization chambers and/or semiconductor detectors as used in X-ray diagnostic imaging |
IEC 61000-6-6:2003
|
Electromagnetic compatibility (EMC) - Part 6-6: Generic standards - HEMP immunity for indoor equipment |
IEC 61000-4-25:2001+AMD1:2012 CSV
|
Electromagnetic compatibility (EMC) - Part 4-25: Testing and measurement techniques - HEMP immunity test methods for equipment and systems |
DIN EN 1760-2:2009-08
|
SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 2: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE EDGES AND PRESSURE SENSITIVE BARS |
ISO 11252:2013
|
Lasers and laser-related equipment — Laser device — Minimum requirements for documentation |
BS EN 50065-2-3:2003
|
Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148.5 Khz Immunity requirements for mains communications equipment and systems operating in the range of frequencies 3 kHz to 95 kHz and intended for use by electricity suppliers and distributors |
BS EN 50270:2015
|
Electromagnetic compatibility. Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen |
BS EN 61850-3:2014
|
COMMUNICATION NETWORKS AND SYSTEMS FOR POWER UTILITY AUTOMATION - PART 3: GENERAL REQUIREMENTS |
EN 62271-1:2017
|
High-voltage switchgear and controlgear - Part 1: Common specifications for alternating current switchgear and controlgear |
IEEE/ANSI N42.53-2013
|
PERFORMANCE CRITERIA FOR BACKPACK-BASED RADIATION-DETECTION SYSTEMS USED FOR HOMELAND SECURITY |
IEC 61547:2009
|
Equipment for general lighting purposes - EMC immunity requirements |
UNE-EN 12645:2015
|
Tyre pressure measuring instruments - Devices for inspection of pressure and/or inflation / deflation of tyres for motor vehicles - Metrology, requirements and testing |
IEC 60325:2002
|
Radiation protection instrumentation - Alpha, beta and alpha/beta (beta energy >60 keV) contamination meters and monitors |
IEC 62236-3-2:2018 RLV
|
Railway applications - Electromagnetic compatibility - Part 3-2: Rolling stock - Apparatus |
BS EN 50165:1997
|
Electrical equipment of non-electric appliances for household and similar purposes. Safety requirements |
BS IEC 60092-504:2016
|
Electrical installations in ships Automation, control and instrumentation |
IEC 61000-2-13:2005
|
Electromagnetic compatibility (EMC) - Part 2-13: Environment - High-power electromagnetic (HPEM) environments - Radiated and conducted |
UNE-EN 55024:2011
|
Information technology equipment - Immunity characteristics - Limits and methods of measurement |
DIN EN ISO 13849-1:2016-06
|
Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015); German version EN ISO 13849-1:2015 |
BS EN 298:2012
|
Automatic burner control systems for burners and appliances burning gaseous or liquid fuels |
BS IEC 61000-6-6:2003
|
ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-6: GENERIC STANDARDS - HEMP IMMUNITY FOR INDOOR EQUIPMENT |
IEC 61326-3-2:2017 RLV
|
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 3-2: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) - Industrial applications with specified electromagnetic environment |
IEC 61513:2011
|
Nuclear power plants - Instrumentation and control important to safety - General requirements for systems |
UNE-EN 60947-3:2009
|
Low-voltage switchgear and controlgear -- Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units |
UNE-EN 60947-5-3:2014
|
Low-voltage switchgear and controlgear - Part 5-3: Control circuit devices and switching elements - Requirements for proximity devices with defined behaviour under fault conditions (PDDB) |
BIS IS/IEC 60947-2 : 2003
|
LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 2: CIRCUIT BREAKERS |
IEC 62026-1:2007
|
Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 1: General rules |
BS EN 50121-4:2016
|
Railway applications. Electromagnetic compatibility Emission and immunity of the signalling and telecommunications apparatus |
IEC TS 61000-1-2:2008
|
Electromagnetic compatibility (EMC) - Part 1-2: General - Methodology for the achievement of functional safety of electrical and electronic systems including equipment with regard to electromagnetic phenomena |
IEC 61326-3-1:2017 RLV
|
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 3-1: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) - General industrial applications |
IEC 61800-5-2:2016
|
Adjustable speed electrical power drive systems - Part 5-2: Safety requirements - Functional |
IEC PAS 62026-7:2009
|
Low-voltage switchgear and controlgear - Controller-Device Interfaces (CDIs) - Part 7: CompoNet |
IEC 62236-5:2018
|
Railway applications - Electromagnetic compatibility - Part 5: Emission and immunity of fixed power supply installations and apparatus |
IEC TS 63053:2017
|
General requirements for residual current operated protective devices for DC system |
BS EN 50130-4 : 2011
|
ALARM SYSTEMS - PART 4: ELECTROMAGNETIC COMPATIBILITY - PRODUCT FAMILY STANDARD: IMMUNITY REQUIREMENTS FOR COMPONENTS OF FIRE, INTRUDER, HOLD UP, CCTV, ACCESS CONTROL AND SOCIAL ALARM SYSTEMS |
ISO 26142:2010
|
Hydrogen detection apparatus Stationary applications |
IEC TR 61000-2-5:2017 RLV
|
Electromagnetic compatibility (EMC) - Part 2-5: Environment - Description and classification of electromagnetic environments |
UNE-EN 50130-4:2011
|
Alarm systems - Part 4: Electromagnetic compatibility - Product family standard: Immunity requirements for components of fire, intruder, hold up, CCTV, access control and social alarm systems |
IEC 60580:2000
|
Medical electrical equipment - Dose area product meters |
IEC 62888-2:2018
|
Railway applications - Energy measurement on board trains - Part 2: Energy measurement |
IEC 60204-31:2013
|
Safety of machinery - Electrical equipment of machines - Part 31: Particular safety and EMC requirements for sewing machines, units and systems |
IEC 62463:2010
|
Radiation protection instrumentation - X-ray systems for the screening of persons for security and the carrying of illicit items |
IEC 61000-6-1:2016
|
Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity standard for residential, commercial and light-industrial environments |
BS EN 60947-4-2:2012
|
Low-voltage switchgear and controlgear Contactors and motor-starters. AC semiconductor motor controllers and starters |
IEC TS 61000-5-8:2009
|
Electromagnetic compatibility (EMC) - Part 5-8: Installation and mitigation guidelines - HEMP protection methods for the distributed infrastructure |
IEC 61851-21:2001
|
Electric vehicle conductive charging system - Part 21: Electric vehicle requirements for conductive connection to an a.c./d.c. supply |
IEC TS 61000-6-5:2001
|
Electromagnetic compatibility (EMC) - Part 6-5: Generic standards - Immunity for power station and substation environments |
DD IEC/TS 62091:2003
|
LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - CONTROLLERS FOR DRIVERS OF STATIONARY FIRE PUMPS |
UNE-EN ISO 4064-2:2015
|
Water meters for cold potable water and hot water - Part 2: Test methods (ISO 4064-2:2014) |
CISPR 35:2016
|
Electromagnetic compatibility of multimedia equipment - Immunity requirements |
CISPR 20:2006+AMD1:2013 CSV
|
Sound and television broadcast receivers and associated equipment -Immunity characteristics - Limits and methods of measurement |
IEC 61037:1990+AMD1:1996+AMD2:1998 CSV
|
Electricity metering - Tariff and load control - Particular requirements for electronic ripple control receivers |
DD IEC/TS 61000-1-2:2001
|
ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 1-2: GENERAL - METHODOLOGY FOR THE ACHIEVEMENT OF FUNCTIONAL SAFETY OF ELECTRICAL AND ELECTRONIC SYSTEMS INCLUDING EQUIPMENT WITH REGARD TO ELECTROMAGNETIC PHENOMENA |
BS EN 62606:2013
|
General requirements for arc fault detection devices |
CSA C22.2 No. 61058.1 : 2009
|
SWITCHES FOR APPLIANCES - PART 1: GENERAL REQUIREMENTS |
IEC 60947-4-2:2011
|
Low-voltage switchgear and controlgear - Part 4-2: Contactors and motor-starters - AC semiconductor motor controllers and starters |
IEC 61000-6-2:2016
|
Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity standard for industrial environments |
IEC 60092-504:2016 RLV
|
Electrical installations in ships - Part 504: Automation, control and instrumentation |
IEC 61757-1:2012
|
Fibre optic sensors - Part 1: Generic specification |
IEC 61779-1:1998
|
Electrical apparatus for the detection and measurement of flammable gases - Part 1: General requirements and test methods |
IEC 60947-6-1:2005+AMD1:2013 CSV
|
Low-voltage switchgear and controlgear - Part 6-1: Multiple functionequipment - Transfer switching equipment |
BS EN 61779-1:2000
|
ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF FLAMMABLE GASES - PART 1: GENERAL REQUIREMENTS AND TEST METHODS |
PD CLC/TR 50450:2006
|
RESISTIBILITY REQUIREMENTS FOR EQUIPMENT HAVING (A) TELECOMMUNICATION PORT(S) |
DIN EN 12645:2015-02
|
Tyre pressure measuring instruments - Devices for inspection of pressure and/or inflation / deflation of tyres for motor vehicles - Metrology, requirements and testing |
BIS IS 12552 : 2012
|
SOUND AND TELEVISION BROADCAST RECEIVERS AND ASSOCIATED EQUIPMENT - IMMUNITY CHARACTERISTICS - LIMITS AND METHODS OF MEASUREMENT |
UNE-EN ISO 11252:2013
|
Lasers and laser-related equipment - Laser device - Minimum requirements for documentation (ISO 11252:2013) |
IEC 60947-5-1:2016 RLV
|
Low-voltage switchgear and controlgear - Part 5-1: Control circuit devices and switching elements - Electromechanical control circuit devices |
IEC 61000-4-1:2006
|
Electromagnetic compatibility (EMC) - Part 4-1: Testing and measurement techniques - Overview of IEC 61000-4 series |
CAN/CSA-C22.2 NO. 60335-1:11 (R2016)
|
Safety of household and similar appliances - Part 1: General requirements (Tri-national standard, with NMX-J-521/1-ANCE and UL 60335-1) |
VDE 0557-3 : 2001 COR 1 2004
|
LOW-VOLTAGE POWER SUPPLIES, D.C. OUTPUT - PART 3: PRODUCT EMC STANDARD |
DIN ISO 16000-29:2015-02
|
INDOOR AIR - PART 29: TEST METHODS FOR VOC DETECTORS (ISO 16000-29:2014) |
IEC TS 62603-1:2014
|
Industrial process control systems - Guideline for evaluating process control systems - Part 1: Specifications |
IEC 62387-1:2007
|
Radiation protection instrumentation - Passive integrating dosimetry systems for environmental and personal monitoring - Part 1: General characteristics and performance requirements |
IEC 61559-1:2009
|
Radiation protection instrumentation in nuclear facilities - Centralized systems for continuous monitoring of radiation and/or levels of radioactivity - Part 1: General requirements |
IEC 60728-2:2018
|
Cable networks for television signals, sound signals and interactive services - Part 2: Electromagnetic compatibility for equipment |
VDE 0414-44-7 : 2000
|
INSTRUMENT TRANSFORMERS - PART 7: ELECTRONIC VOLTAGE TRANSFORMERS |
IEC 60947-2:2016 RLV
|
Low-voltage switchgear and controlgear - Part 2: Circuit-breakers |
AAMI TIR18:2010
|
GUIDANCE ON ELECTROMAGNETIC COMPATIBILITY OF MEDICAL DEVICES IN HEALTHCARE FACILITIES |
BS EN 62841-1:2015
|
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery. Safety General requirements |
BIS IS/IEC 62271-1 : 2007
|
HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: COMMON SPECIFICATIONS |
DIN EN 13718-1:2014-12
|
MEDICAL VEHICLES AND THEIR EQUIPMENT - AIR AMBULANCES - PART 1: REQUIREMENTS FOR MEDICAL DEVICES USED IN AIR AMBULANCES |
DIN EN 1434-4:2019-08
|
Thermal energy meters - Part 4: Pattern approval tests (includes Amendment A1:2018) |
BIS IS/IEC 60947-5-1 : 2003
|
LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - SECTION 1: ELECTROMECHANICAL CONTROL CIRCUIT DEVICES |
DIN EN ISO 13856-3:2013-12
|
SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 3: GENERAL PRINCIPLES FOR DESIGN AND TESTING OF PRESSURE-SENSITIVE BUMPERS, PLATES, WIRES AND SIMILAR DEVICES (ISO 13856-3:2013) |
DIN EN 230:2005-10
|
AUTOMATIC BURNER CONTROL SYSTEMS FOR OIL BURNERS |
UL 749 : 2017
|
HOUSEHOLD DISHWASHERS |
DIN EN ISO 4064-2:2016-09 (Draft)
|
WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 2: TEST METHODS (ISO 4064-2:2014) |
BS EN 50121-3-2:2016
|
Railway applications. Electromagnetic compatibility Rolling stock. Apparatus |
ISO 16090-1:2017
|
Machine tools safety — Machining centres, Milling machines, Transfer machines — Part 1: Safety requirements |
DIN CEN ISO/TS 14907-1;DIN SPEC 91192:2015-12
|
ELECTRONIC FEE COLLECTION - TEST PROCEDURES FOR USER AND FIXED EQUIPMENT - PART 1: DESCRIPTION OF TEST PROCEDURES (ISO/TS 14907-1:2015) |
IEC 60730-1:2013+AMD1:2015 CSV
|
Automatic electrical controls - Part 1: General requirements |
BS EN 62343-2:2014
|
Dynamic modules Reliability qualification |
BS EN 61326-1:2013
|
Electrical equipment for measurement, control and laboratory use. EMC requirements General requirements |
DIN EN 298:2012-11
|
AUTOMATIC BURNER CONTROL SYSTEMS FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS |
DIN EN 12405-1:2011-04
|
GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION |
BS EN 1434-4 : 2015
|
HEAT METERS - PART 4: PATTERN APPROVAL TESTS |
DIN EN 809:2012-10
|
Pumps and pump units for liquids - Common safety requirements |
IEEE/ANSI C63.15-2010
|
RECOMMENDED PRACTICE FOR THE IMMUNITY MEASUREMENT OF ELECTRICAL AND ELECTRONIC EQUIPMENT |
EN 14154-2:2005+A2:2011
|
Water meters - Part 2: Installation and conditions of use |
IEC 61676:2002+AMD1:2008 CSV
|
Medical electrical equipment - Dosimetric instruments used for non-invasive measurement of X-ray tube voltage in diagnostic radiology |
DIN EN 12405-3:2016-04
|
Gas meters - Conversion devices - Part 3: Flow computer |
I.S. EN 298:2012
|
AUTOMATIC BURNER CONTROL SYSTEMS FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS |
IEC 62236-4:2018 RLV
|
Railway applications - Electromagnetic compatibility - Part 4: Emission and immunity of the signalling and telecommunications apparatus |
BS EN 50325-1:2002
|
Industrial communication subsystem based on ISO 11898 (CAN) for controller-device interfaces General requirements |
EN 61000-4-25 : 2002 AMD 1 2012
|
ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-25: TESTING AND MEASUREMENT TECHNIQUES - HEMP IMMUNITY TEST METHODS FOR EQUIPMENT AND SYSTEMS (IEC 61000-4-25:2001/A1:2012) |
CSA C22.2 No. 281.2 : 2012 : INC : UPD 2 : 2016
|
STANDARD FOR SAFETY FOR PERSONNEL PROTECTION SYSTEMS FOR ELECTRIC VEHICLE (EV) SUPPLY CIRCUITS: PARTICULAR REQUIREMENTS FOR PROTECTION DEVICES FOR USE IN CHARGING SYSTEMS |
CAN/CSA-C22.2 NO. 281.2-12 (R2017)
|
Standard for safety for personnel protection systems for electric vehicle (EV) supply circuits: Particular requirements for protection devices for use in charging systems (Tri-national standard, with UL 2231-2 and NMX-J-668/2-ANCE) |
EN ISO 4064-2:2017
|
Water meters for cold potable water and hot water - Part 2: Test methods (ISO 4064-2:2014) |
IEC 62052-21:2004+AMD1:2016 CSV
|
Electricity metering equipment (a.c.) - General requirements, tests and test conditions - Part 21: Tariff and load control equipment |
IEC 62236-5:2018 RLV
|
Railway applications - Electromagnetic compatibility - Part 5: Emission and immunity of fixed power supply installations and apparatus |
BS EN 12405-3:2015
|
GAS METERS - CONVERSION DEVICES - PART 3: FLOW COMPUTER |
BS EN 61000-1-2:2016
|
Electromagnetic compatibility (EMC) General. Methodology for the achievement of functional safety of electrical and electronic systems including equipment with regard to electromagnetic phenomena |
BS EN 230:2005
|
AUTOMATIC BURNER CONTROL SYSTEMS FOR OIL BURNERS |
BS EN 60934 : 2001
|
CIRCUIT-BREAKERS FOR EQUIPMENT (CBE) |
IEC 60861:2006
|
Equipment for monitoring of radionuclides in liquid effluents and surface waters |
IEC 61069-1:2016
|
Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 1: Terminology and basic concepts |
BS EN 1300:2013
|
SECURE STORAGE UNITS - CLASSIFICATION FOR HIGH SECURITY LOCKS ACCORDING TO THEIR RESISTANCE TO UNAUTHORIZED OPENING |
DIN EN 1300:2014-05
|
SECURE STORAGE UNITS - CLASSIFICATION FOR HIGH SECURITY LOCKS ACCORDING TO THEIR RESISTANCE TO UNAUTHORIZED OPENING |
NF EN 62841-1 : 2016
|
ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
UNE-EN 60204-31:2013
|
Safety of machinery - Electrical equipment of machines - Part 31: Particular safety and EMC requirements for sewing machines, units and systems |
PD IEC/TR 61000-1-5:2004
|
Electromagnetic compatibility (EMC) General - High power electromagnetic (HPEM) effects on civil systems |
IEC 60945:2002
|
Maritime navigation and radiocommunication equipment and systems - General requirements - Methods of testing and required test results |
UNE-EN 55014-2:2015
|
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2: Immunity - Product family standard |
IEC 60770-1:2010
|
Transmitters for use in industrial-process control systems - Part 1: Methods for performance evaluation |
IEC TR 61000-5-6:2002
|
Electromagnetic compatibility (EMC) - Part 5-6: Installation and mitigation guidelines - Mitigation of external EM influences |
BS EN 61326-3-2:2008
|
Electrical equipment for measurement, control and laboratory use. EMC requirements Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety). Industrial applications with specified electromagnetic environment |
EN 60601-1-2:2015
|
Medical electrical equipment - Part 1-2: General requirements for basic safety and essential performance - Collateral Standard: Electromagnetic disturbances - Requirements and tests |
IEC 60730-2-8:2000+AMD1:2002+AMD2:2015 CSV
|
Automatic electrical controls for household and similar use - Part 2-8: Particular requirements for electrically operated watervalves, including mechanical requirements |
UNE-EN 50121-4:2017
|
Railway applications - Electromagnetic compatibility - Part 4: Emission and immunity of the signalling and telecommunications apparatus |
EN 62282-3-201:2017
|
Fuel cell technologies - Part 3-201: Stationary fuel cell power systems - Performance test methods for small fuel cell power systems |
EN ISO 11252:2013
|
Lasers and laser-related equipment - Laser device - Minimum requirements for documentation (ISO 11252:2013) |
IEC TS 61000-5-10:2017
|
Electromagnetic compatibility (EMC) - Part 5-10: Installation and mitigation guidelines - Guidance on the protection of facilities against HEMP and IEMI |
BS EN 61298-3:2008
|
PROCESS MEASUREMENT AND CONTROL DEVICES - GENERAL METHODS AND PROCEDURES FOR EVALUATING PERFORMANCE - PART 3: TESTS FOR THE EFFECTS OF INFLUENCE QUANTITIES |
DIN EN 12952-11:2007-09
|
WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 11: REQUIREMENTS FOR LIMITING DEVICES OF THE BOILER AND ACCESSORIES |
IEC 61000-1-2:2016
|
Electromagnetic compatibility (EMC) - Part 1-2: General - Methodology for the achievement of functional safety of electrical and electronic systems including equipment with regard to electromagnetic phenomena |
IEC 62236-4:2018
|
Railway applications - Electromagnetic compatibility - Part 4: Emission and immunity of the signalling and telecommunications apparatus |
IEC TR 61131-4:2004
|
Programmable controllers - Part 4: User guidelines |
BS EN 55020 : 2007
|
SOUND AND TELEVISION BROADCAST RECEIVERS AND ASSOCIATED EQUIPMENT - IMMUNITY CHARACTERISTICS - LIMITS AND METHODS OF MEASUREMENT |
BS EN 62052-21 : 2004
|
ELECTRICITY METERING EQUIPMENT (A.C.) - GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - PART 21: TARIFF AND LOAD CONTROL EQUIPMENT (IEC 62052-21:2004) |
DIN EN 45501:2016-03
|
METROLOGICAL ASPECTS OF NON-AUTOMATIC WEIGHING INSTRUMENTS |
IEC 60947-5-9:2006
|
Low-voltage switchgear and controlgear - Part 5-9: Control circuit devices and switching elements - Flow rate switches |
BS EN 12405:2002
|
GAS METERS - GAS-VOLUME ELECTRONIC CONVERSION DEVICES |
ISO 3930:2000
|
Instruments for measuring vehicle exhaust emissions |
UNE-EN 61812-1:2012
|
Time relays for industrial and residential use - Part 1: Requirements and tests |
BS EN 50490:2008
|
ELECTRICAL INSTALLATIONS FOR LIGHTING AND BEACONING OF AERODROMES - TECHNICAL REQUIREMENTS FOR AERONAUTICAL GROUND LIGHTING CONTROL AND MONITORING SYSTEMS - UNITS FOR SELECTIVE SWITCHING AND MONITORING OF INDIVIDUAL LAMPS |
BS EN 60044-7:2000
|
INSTRUMENT TRANSFORMERS - PART 7 - ELECTRONIC VOLTAGE TRANSFORMERS |
DIN EN 60580:2001-12
|
Medical electrical equipment - Dose area product meters (IEC 60580:2000); German version EN 60580:2000 |
BS EN 62387-1:2012
|
RADIATION PROTECTION INSTRUMENTATION - PASSIVE INTEGRATING DOSIMETRY SYSTEMS FOR ENVIRONMENTAL AND PERSONAL MONITORING - PART 1: GENERAL CHARACTERISTICS AND PERFORMANCE REQUIREMENTS (IEC 62387-1:2007, MODIFIED) |
DIN EN 12016:2013-12
|
Electromagnetic compatibility - Product family standard for lifts, escalators and moving walks - Immunity |
BS EN 60044-8:2002
|
Instrument transformers Electronic current transformers |
PD IEC/TR 61000-2-5:2017 (published 2017-02)
|
Electromagnetic compatibility (EMC) Environment. Description and classification of electromagnetic environments |
DD IEC/TS 62215-2:2007
|
INTEGRATED CIRCUITS - MEASUREMENT OF IMPULSE IMMUNITY - PART 2: SYNCHRONOUS TRANSIENT INJECTION METHOD |
BS EN 62271-1:2017
|
High-voltage switchgear and controlgear Common specifications for alternating current switchgear and controlgear |
BS EN 50136-2-1:1998
|
ALARM SYSTEMS - ALARM TRANSMISSION SYSTEMS AND EQUIPMENT - PART 2-1: GENERAL REQUIREMENTS FOR ALARM TRANSMISSION EQUIPMENT |
UNE-EN 60947-8:2005
|
Low-voltage switchgear and controlgear -- Part 8: Control units for built-in thermal protection (PTC) for rotating electrical machines |
BIS IS/IEC 60947-4-2 : 1999
|
LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4: CONTRACTORS AND MOTOR-STARTERS - SECTION 2: AC SEMICONDUCTOR MOTOR CONTROLLERS AND STARTERS |
BIS IS/IEC 60947-3 : 1999
|
LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 3: SWITCHES, DISCONNECTORS, SWITCH-DISCONNECTORS AND FUSE COMBINATION UNITS |
BS EN 62488-1:2013
|
POWER LINE COMMUNICATION SYSTEMS FOR POWER UTILITY APPLICATIONS - PART 1: PLANNING OF ANALOGUE AND DIGITAL POWER LINE CARRIER SYSTEMS OPERATING OVER EHV/HV/MV ELECTRICITY GRIDS |
BS EN 62488-2:2017
|
Power line communication systems for power utility applications Analogue power line carrier terminals or APLC |
ISO 13856-3:2013
|
Safety of machinery Pressure-sensitive protective devices Part 3: General principles for design and testing of pressure-sensitive bumpers, plates, wires and similar devices |
DIN 16086:2006-01
|
ELECTRICAL PRESSURE MEASURING INSTRUMENTS - PRESSURE TRANSMITTERS, PRESSURE MEASURING INSTRUMENTS - CONCEPTS, SPECIFICATIONS ON DATA SHEETS |
I.S. EN 61779-1:2003
|
ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF FLAMMABLE GASES - PART 1: GENERAL REQUIREMENTS AND TEST METHODS |
BS ISO/IEC 18046-2:2011
|
INFORMATION TECHNOLOGY - RADIO FREQUENCY IDENTIFICATION DEVICE PERFORMANCE TEST METHODS - PART 2: TEST METHODS FOR INTERROGATOR PERFORMANCE |
BS EN ISO 11252:2013
|
Lasers and laser-related equipment. Laser device. Minimum requirements for documentation |
BS ISO 7176-21:2009 (published 2010-03)
|
Wheelchairs Requirements and test methods for electromagnetic compatibility of electrically powered wheelchairs and scooters, and battery chargers |
BS IEC 61000-4-36:2014
|
ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-36: TESTING AND MEASUREMENT TECHNIQUES - IEMI IMMUNITY TEST METHODS FOR EQUIPMENT AND SYSTEMS |
BS EN 50557:2011
|
Requirements for automatic reclosing devices (ARDs) for circuit breakers-RCBOs-RCCBs for household and similar uses |
BS IEC 60768:2009
|
Nuclear power plants. Instrumentation important to safety. Equipment for continuous in-line or on-line monitoring of radioactivity in process streams for normal and incident conditions |
BS EN 60947-5-3:2013
|
Low-voltage switchgear and controlgear Control circuit devices and switching elements. Requirements for proximity devices with defined behaviour under fault conditions (PDDB) |
BS EN 61000-4-1:2007
|
Electromagnetic compatibility (EMC) Testing and measurement techniques. Overview of IEC 61000-4 series |
BS EN 62115 : 2005
|
ELECTRIC TOYS - SAFETY |
BS EN 12645:2014 (published 2014-08)
|
Tyre pressure measuring instruments. Devices for inspection of pressure and/or inflation / deflation of tyres for motor vehicles. Metrology, requirements and testing |
BS EN 61851-21:2002
|
ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - ELECTRIC VEHICLE REQUIREMENTS FOR CONDUCTIVE CONNECTION TO AN A.C/D.C. SUPPLY |
BS EN 62689-1:2016 (published 2017-01)
|
Current and voltage sensors or detectors, to be used for fault passage indication purposes General principles and requirements |
PD IEC/TS 63053:2017
|
General requirements for residual current operated protective devices for DC systems |
BS EN 61000-6-5:2015
|
Electromagnetic compatibility (EMC) Generic standards. Immunity for equipment used in power station and substation environment |
ISO/TR 18569:2004
|
Safety of machinery Guidelines for the understanding and use of safety of machinery standards |
ISO 13856-1:2013
|
Safety of machinery Pressure-sensitive protective devices Part 1: General principles for design and testing of pressure-sensitive mats and pressure-sensitive floors |
UNE-EN 14846:2010
|
Building hardware - Locks and latches - Electromechanically operated locks and striking plates - Requirements and test methods |
UNE-EN ISO 13849-1:2016
|
Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015) |
PD CLC/TR 50669:2017
|
Investigation Results on Electromagnetic Interference in the Frequency Range below 150 kHz |
DIN EN ISO 4064-2:2017-10
|
WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 2: TEST METHODS (ISO 4064-2:2014) |
BS EN ISO 13856-1:2013
|
Safety of machinery. Pressure-sensitive protective devices General principles for design and testing of pressure-sensitive mats and pressure-sensitive floors |
|