IEC 61010-1:2010+AMD1:2016 CSV

Current

Current The latest, up-to-date edition.

Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements

Available format(s): Hardcopy, PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

Language(s): English - French

Published date: 10-01-2017

Publisher: International Electrotechnical Committee

Abstract - (Show below) - (Hide below)

IEC 61010-1:2010+A1:2016 specifies general safety requirements for the following types of electrical equipment and their accessories, wherever they are intended to be used.
a) Electrical test and measurement equipment
b) Electrical industrial process-control equipment c) Electrical laboratory equipment
This third edition cancels and replaces the second edition published in 2001. It constitutes a technical revision. This edition includes the following significant changes from the second edition, as well as numerous other changes.
- The scope of the standard has been expanded to include all locations where these products may be used, so that both professional and non-professional versions of these products are within the scope.
- The requirements for testing and measuring circuits (in various subclauses and the entirety of Clause 16) have been removed and included in a particular standard IEC 61010-2-030.
- Insulation requirements (6.7) have been completely rewritten.
- Additional requirements for protection against mechanical HAZARDS (Clause 7) have been included.
- Surface temperature limits (Clause 10) have been modified to conform to the limits of EN 563.
- Radiation requirements (Clause 12) have been modified, and take into account a distinction between intended emission and unintended emission.
- Requirements for reasonably foreseeable misuse and ergonomic aspects have been added (Clause 16).
- A new clause (Clause 17) has been added to deal with HAZARDS and environments not covered by the standard, along with a new informative annex (Annex J) dealing with RISK assessment.
- A new informative annex (Annex E) addresses methods of reducing the POLLUTION DEGREE of a micro-environment.
- Requirements for the qualification of coatings for protection against POLLUTION have been added (Annex H).
- A new informative annex (Annex I) has been added to further explain how to determine the WORKING VOLTAGE of a MAINS CIRCUIT.
The contents of the corrigendum 1 of May 2011, the interpretation sheet 1 of February 2013, the corrigendum 2 of October 2013 and the corrigendum 1 to Amendment 1 of March 2019 have been included in this copy.
This consolidated version consists of the third edition (2010) and its amendment 1 (2016). Therefore, no need to order amendment in addition to this publication.

General Product Information - (Show below) - (Hide below)

Development Note	Supersedes IEC 60348, IEC 60414. (03/2001) Also available in CD-ROM format. Stability Date: 2021. (01/2017)
Document Type	Standard
ISBN
Pages
Product Note	New child COR 1 2019 is added.
Published
Publisher	International Electrotechnical Committee
Status	Current
Supersedes	IEC 60414:1973 IEC 61010-1:2001/COR2:2003 IEC 61010-1:2001/COR1:2002 IEC 61010-1:2001 IEC 61010-1:2010/AMD1:2016/COR1:2019 IEC 60348:1978

International Equivalents – Equivalent Standard(s) & Relationship - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
GOST IEC 61010-1 : 2014	Identical
NBN EN 61010-1 : 2010	Identical
NF EN 61010-1 : 2011	Identical
I.S. EN 61010-1:2010	Identical
PN EN 61010-1 : 2011	Identical
DIN EN 61010-1 : 2011	Identical
VDE 0411-1 : 2011	Identical
EN 61010-1:2010/A1:2019	Identical
CEI EN 61010-1 : 2013	Identical
NEN 11010-1 : 1994 AMD 2 1995	Identical
SANS 61010-1 : 3ED 2011	Identical
CSA C22.2.1010.1B : 1997	Similar to
SN EN 61010-1 : 2001	Identical
CSA C22.2 No. 1010.1 : 0	Similar to
UNE-EN 61010-1:2011	Identical

Standards Referenced By This Book - (Show below) - (Hide below)

IEC 60601-2-28 : 3.0	MEDICAL ELECTRICAL EQUIPMENT - PART 2-28: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF X-RAY TUBE ASSEMBLIES FOR MEDICAL DIAGNOSIS
I.S. EN IEC 62828-1:2018	REFERENCE CONDITIONS AND PROCEDURES FOR TESTING INDUSTRIAL AND PROCESS MEASUREMENT TRANSMITTERS - PART 1: GENERAL PROCEDURES FOR ALL TYPES OF TRANSMITTERS
CSA ISO 15197 : 2015	IN VITRO DIAGNOSTIC TEST SYSTEMS - REQUIREMENTS FOR BLOOD-GLUCOSE MONITORING SYSTEMS FOR SELF-TESTING IN MANAGING DIABETES MELLITUS
CEI EN 61298-2 : 2011	PROCESS MEASUREMENT AND CONTROL DEVICES - GENERAL METHODS AND PROCEDURES FOR EVALUATING PERFORMANCE - PART 2: TESTS UNDER REFERENCE CONDITIONS
CEI EN 60873-1 : 2005	ELECTRICAL AND PNEUMATIC ANALOGUE CHART RECORDERS FOR USE IN INDUSTRIALPROCESS SYSTEMS - PART 1: METHODS FOR PERFORMANCE EVALUATION
DIN EN ISO 11135-1:2007-08	STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES
13/30287730 DC : 0	BS EN 62828 ED 1.0 - REFERENCE CONDITIONS AND PROCEDURES FOR INDUSTRIAL MEASUREMENT TRANSMITTERS - PART 1: GENERAL PROCEDURES FOR ALL TYPES OF TRANSMITTERS
BS EN 60405:2007	NUCLEAR INSTRUMENTATION - CONSTRUCTIONAL REQUIREMENTS AND CLASSIFICATION OF RADIOMETRIC GAUGES
BS EN 61514-2:2013	Industrial process control systems Methods of evaluating the performance of intelligent valve positioners with pneumatic outputs mounted on an actuator valve assembly
01/122563 DC : DRAFT JULY 2001	BS EN 14175-2 - FUME CUPBOARDS - PART 2: SAFETY AND PERFORMANCE REQUIREMENTS
02/124462 DC : DRAFT DEC 2002	BS EN 285 - STERILIZATION - STEAM STERILIZERS - LARGE STERILIZERS
14/30295302 DC : 0	BS EN 61587-1 ED. 4.0 - MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT - TESTS FOR IEC 60917 AND IEC 60297 SERIES - PART 1: ENVIRONMENTAL REQUIREMENTS, TEST SET-UP AND SAFETY ASPECTS FOR CABINETS, RACKS, SUBRACKS AND CHASSIS UNDER INDOOR CONDITIONS
BS EN 61557-2:2007	Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Equipment for testing, measuring or monitoring of protective measures Insulation resistance
BS PD IEC 61340-5-2 : 1999 AMD 13197	ELECTROSTATICS - PART 5-2: PROTECTION OF ELECTRONIC DEVICES FROM ELECTROSTATIC PHENOMENA - USER GUIDE
07/30164535 DC : 0	BS EN 60974-8 - ARC WELDING EQUIPMENT - PART 8: GAS CONSOLES FOR WELDING AND PLASMA CUTTING SYSTEMS
02/203203 DC : DRAFT FEB 2002	IEC 60873. ED.2 - METHODS OF EVALUATING THE PERFORMANCE OF ELECTRICAL AND PNEUMATIC ANALOGUE CHART RECORDERS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS
08/30188496 DC : DRAFT AUG 2008	BS EN 61000-4-15 - ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-15: TESTING AND MEASUREMENT TECHNIQUES - FLICKERMETER - FUNCTIONAL AND DESIGN SPECIFICATIONS
BS 7437(1991) : 1991 AMD 7714	SPECIFICATION FOR ELECTRICAL MEASURING INSTRUMENTS - X-Y RECORDERS
NF EN 60731 : 2012	MEDICAL ELECTRICAL EQUIPMENT - DOSIMETERS WITH IONIZATION CHAMBERS AS USED IN RADIOTHERAPY
BS EN 61514:2002	Industrial-process control systems. Methods of evaluating the performance of valve positioners with pneumatic outputs
DIN ISO 2954 E : 2012	MECHANICAL VIBRATION OF ROTATING AND RECIPROCATING MACHINERY - REQUIREMENTS FOR INSTRUMENTS FOR MEASURING VIBRATION SEVERITY (ISO 2954:2012)
11/30213783 DC : 0	BS EN 50463-1 - RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS - PART 1: GENERAL
BS EN 62467-1:2015	Medical electrical equipment. Dosimetric instruments as used in brachytherapy Instruments based on well-type ionization chambers
10/30192214 DC : 0
EN IEC 60519-12:2018	Safety in installations for electroheating and electromagnetic processing - Part 12: Particular requirements for infrared electroheating
15/30325784 DC : 0	BS EN 62974-1 - MONITORING AND MEASURING SYSTEMS USED FOR DATA COLLECTION, GATHERING AND ANALYSIS - PART 1: DEVICE REQUIREMENTS
BS ISO 18086 : 2015	CORROSION OF METALS AND ALLOYS - DETERMINATION OF AC CORROSION - PROTECTION CRITERIA
BS ISO 17593:2007 (published 2007-05)	Clinical laboratory testing and in vitro medical devices. Requirements for in vitro monitoring systems for self-testing of oral anticoagulant therapy
04/30122740 DC : DRAFT SEP 2004	IEC 60974-4 - ARC WELDING EQUIPMENT - PART 4: SAFETY, MAINTENANCE AND INSPECTION OF ARC WELDING EQUIPMENT IN USE
UNI EN ISO 18113-5 : 2012	IN VITRO DIAGNOSTIC MEDICAL DEVICES - INFORMATION SUPPLIED BY THE MANUFACTURER (LABELLING) - PART 5: IN VITRO DIAGNOSTIC INSTRUMENTS FOR SELF- TESTING
DIN EN 15280 E : 2013	EVALUATION OF A.C. CORROSION LIKELIHOOD OF BURIED PIPELINES APPLICABLE TO CATHODICALLY PROTECTED PIPELINES
BS EN ISO 18113-3:2011	IN VITRO DIAGNOSTIC MEDICAL DEVICES - INFORMATION SUPPLIED BY THE MANUFACTURER (LABELLING) - PART 3: IN VITRO DIAGNOSTIC INSTRUMENTS FOR PROFESSIONAL USE (ISO 18113-3:2009)
06/30160065 DC : 0	BS EN ISO 11143 ED 2 - DENTAL EQUIPMENT - AMALGAM SEPARATORS
13/30294110 DC : 0	BS EN 61784-3-X ED 1.0 - INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3-X: FUNCTIONAL SAFETY FIELDBUSES - ADDITIONAL SPECIFICATIONS FOR CPF X
BS EN ISO 13958:2015	CONCENTRATES FOR HAEMODIALYSIS AND RELATED THERAPIES
ANSI N42.44 : 2008	PERFORMANCE OF CHECKPOINT CABINET X-RAY IMAGING SECURITY SYSTEMS
10/30181171 DC : 0	BS EN 62586 - POWER QUALITY MONITORING DEVICES IN POWER SUPPLY SYSTEMS
CEI EN 61557-3 : 2008	ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. AND 1500 V D.C. - EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 3: LOOP IMPEDANCE
10/30217545 DC : 0	BS EN 61674 - MEDICAL ELECTRICAL EQUIPMENT - DOSIMETERS WITH IONIZATION CHAMBERS AND/OR SEMI-CONDUCTOR DETECTORS AS USED IN X-RAY DIAGNOSTIC IMAGING
PREN 14180 : DRAFT 2012	STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE STEAM AND FORMALDEHYDE STERILIZERS - REQUIREMENTS AND TESTING
04/30081258 DC : DRAFT MARCH 2004	BS EN ISO 11737-1 - STERILIZATION OF MEDICAL DEVICES - MICROBIOLOGICAL METHODS - PART 1 - DETERMINATION OF A POPULATION OF MICRO ORGANISMS ON PRODUCTS
DIN EN ISO 18113-3:2013-01	IN VITRO DIAGNOSTIC MEDICAL DEVICES - INFORMATION SUPPLIED BY THE MANUFACTURER (LABELLING) - PART 3: IN VITRO DIAGNOSTIC INSTRUMENTS FOR PROFESSIONAL USE (ISO 18113-3:2009)
BS 5724-1.1(1992) : 1992 AMD 8099	MEDICAL ELECTRICAL EQUIPMENT - GENERAL REQUIREMENTS FOR SAFETY - COLLATERAL STANDARD: SAFETY REQUIREMENTS FOR MEDICAL ELECTRICAL SYSTEMS
12/30258880 DC : 0	BS EN 60825-1 ED.3 - SAFETY OF LASER PRODUCTS - PART 1: EQUIPMENT CLASSIFICATION AND REQUIREMENTS
BS EN 50495:2010	Safety devices required for the safe functioning of equipment with respect to explosion risks
BS EN 15280:2013	EVALUATION OF A.C. CORROSION LIKELIHOOD OF BURIED PIPELINES APPLICABLE TO CATHODICALLY PROTECTED PIPELINES
I.S. EN 50571:2013	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC WASHING MACHINES
DIN EN ISO 11135:2014-10	STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES (ISO 11135:2014)
PD IEC/TR 61340-5-2:2018	Electrostatics Protection of electronic devices from electrostatic phenomena. User guide
PREN 285 : DRAFT 2013	STERILIZATION - STEAM STERILIZERS - LARGE STERILIZERS
04/30125199 DC : DRAFT NOV 2004	IEC 61557-6 ED.2 - ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. V D.C. EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 6: RESIDUAL CURRENT DEVICES (RCD) IN TT AND TN SYSTEMS
BS EN 60255-27:2014	Measuring relays and protection equipment Product safety requirements
BS EN 60051-1:2017	Direct acting indicating analogue electrical measuring instruments and their accessories Definitions and general requirements common to all parts
CEI EN 60051-1 : 1999	DIRECT ACTING INDICATING ANALOGUE ELECTRICAL MEASURING INSTRUMENTS AND THEIR ACCESSORIES - PART 1: DEFINITIONS AND GENERAL REQUIREMENTS COMMON TO ALL PARTS
UNE-EN ISO 18113-3:2012	In vitro diagnostic medical devices - Information supplied by the manufacturer (labelling) - Part 3: In vitro diagnostic instruments for professional use (ISO 18113-3:2009)
CSA IEC 61000-4-15 : 2012	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-15: TESTING AND MEASUREMENT TECHNIQUES - FLICKERMETER - FUNCTIONAL AND DESIGN SPECIFICATIONS
BS EN 61298-2:2008	Process measurement and control devices. General methods and procedures for evaluating performance Tests under reference conditions
BS EN 60730-2-7:2010	Automatic electrical controls for household and similar use Particular requirements for timers and time switches
BS EN 61010-2-045:2001	Safety requirements for electrical equipment for measurement, control and laboratory use Particular requirements for washer disinfectors used in medical, pharmaceutical, veterinary and laboratory fields
BS EN 62353:2014	Medical electrical equipment. Recurrent test and test after repair of medical electrical equipment
CSA Z11135-1 :2009	STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - PART 1: REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES
CSA Z11135 : 2015	STERILIZATION OF HEALTH-CARE PRODUCTS - ETHYLENE OXIDE - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES
05/30136204 DC : DRAFT JUL 2005
08/30184169 DC : DRAFT JUNE 2008	BS EN 61243-3 - LIVE WORKING - VOLTAGE DETECTORS - PART 3: TWO-POLE LOW-VOLTAGE TYPE
I.S. EN 61557-16:2015	ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. AND 1500 V D.C. - EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 16: EQUIPMENT FOR TESTING THE EFFECTIVENESS OF THE PROTECTIVE MEASURES OF ELECTRICAL EQUIPMENT AND/OR MEDICAL ELECTRICAL EQUIPMENT
07/30152116 DC : 0	BS EN 62467-1 - MEDICAL ELECTRICAL EQUIPMENT - DOSIMETRIC INSTRUMENTS AS USED IN BRACHYTHERAPY - PART 1: INSTRUMENTS BASED ON WELL-TYPE IONIZATION CHAMBERS
BS EN 61557-5:2007	Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Equipment for testing, measuring or monitoring of protective measures Resistance to earth
CEI EN 60146-2 : 2001	SEMICONDUCTOR CONVERTERS - PART 2: SELF-COMMUTATED SEMICONDUCTOR CONVERTERS INCLUDING DIRECT D.C. CONVERTERS
CSA IEC 61000-4-15 : 2012 : R2016	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-15: TESTING AND MEASUREMENT TECHNIQUES - FLICKERMETER - FUNCTIONAL AND DESIGN SPECIFICATIONS
BIS IS/ISO 15197 : 2013	IN VITRO DIAGNOSTIC TEST SYSTEMS - REQUIREMENTS FOR BLOOD-GLUCOSE MONITORING SYSTEM FOR SELF-TESTING IN MANAGING DIABETES MELLITUS
CSA IEC 61000-4-12 : 2013 : R2017	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-12: TESTING AND MEASUREMENT TECHNIQUES - RING WAVE IMMUNITY TEST
CSA Z15190 : 2005 : R2010	MEDICAL LABORATORIES - REQUIREMENTS FOR SAFETY
IEC TR 60930:2008	Guidelines for administrative, medical and nursing staff concerned with the safe use of medical electrical equipment and medical electrical systems
IEC TS 61340-5-2:1999	Electrostatics - Part 5-2: Protection of electronic devices from electrostatic phenomena - User guide
CEI EN 50495 : 2011	SAFETY DEVICES REQUIRED FOR THE SAFE FUNCTIONING OF EQUIPMENT WITH RESPECT TO EXPLOSION RISKS
IEC TR 61340-5-2:2018 RLV	Electrostatics - Part 5-2: Protection of electronic devices from electrostatic phenomena - User guide
CSA C22.2 No. 61010.2.042 : 1998: R2013	SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PARTICULAR REQUIREMENTS FOR AUTOCLAVES AND STERILIZERS USING TOXIC GAS FOR THE TREATMENT OF MEDICAL MATERIALS, AND FOR LABORATORY PROCESSES
I.S. EN 14154-4:2014	WATER METERS - PART 4: ADDITIONAL FUNCTIONALITIES
CSA C22.2 No. 60601.1.1 : 2002	MEDICAL ELECTRICAL EQUIPMENT - PART 1-1: GENERAL REQUIREMENTS FOR SAFETY - COLLATERAL STANDARD: SAFETY REQUIREMENTS FOR MEDICAL ELECTRICAL SYSTEMS
CEI EN 60601-2-22 : 2014	MEDICAL ELECTRICAL EQUIPMENT - PART 2-22: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF SURGICAL, COSMETIC, THERAPEUTIC AND DIAGNOSTIC LASER EQUIPMENT
ANSI/AAMI/ISO 11135:2014	STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES
IEC 61730-2 REDLINE : 2ED 2016	PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 2: REQUIREMENTS FOR TESTING
I.S. EN 61010-2-201:2013	SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - PART 2-201: PARTICULAR REQUIREMENTS FOR CONTROL EQUIPMENT (IEC 61010-2-201:2013 (EQV))
AAMI ST24 : 1999 : R2013	AUTOMATIC, GENERAL-PURPOSE ETHYLENE OXIDE STERILIZERS AND ETHYLENE OXIDE STERILANT SOURCES INTENDED FOR USE IN HEALTH CARE FACILITIES
I.S. EN 62586-1:2017	POWER QUALITY MEASUREMENT IN POWER SUPPLY SYSTEMS - PART 1: POWER QUALITY INSTRUMENTS (PQI)
I.S. EN 61557-1:2007	ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. AND 1500 V D.C. - EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 1: GENERAL REQUIREMENTS
I.S. EN 61557-15:2014	ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. AND 1500 V D.C. - EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 15: FUNCTIONAL SAFETY REQUIREMENTS FOR INSULATION MONITORING DEVICES IN IT SYSTEMS AND EQUIPMENT FOR INSULATION FAULT LOCATION IN IT SYSTEMS
I.S. EN 60770-3:2014	TRANSMITTERS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS - PART 3: METHODS FOR PERFORMANCE EVALUATION OF INTELLIGENT TRANSMITTERS
OIML R 75-1 : 2002	HEAT METERS - PART 1: GENERAL REQUIREMENTS
CEI EN 61557-14 : 2014	ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. AND 1500 V D.C. - EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 14: EQUIPMENT FOR TESTING THE SAFETY OF ELECTRICAL EQUIPMENT OF MACHINERY
BS EN 60770-1:1999	TRANSMITTERS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS - PART 1: METHODS FOR PERFORMANCE EVALUATION
I.S. EN 61557-10:2013	ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. AND 1500 V D.C. - EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 10: COMBINED MEASURING EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES (IEC 61557-10:2013 (EQV))
CEI EN 61557-1 : 2008	ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. AND 1500 V D.C. - EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 1: GENERAL REQUIREMENTS
17/30351978 DC : 0	BS EN 12830 - TEMPERATURE RECORDERS FOR THE TRANSPORT, STORAGE AND DISTRIBUTION OF TEMPERATURE SENSITIVE GOODS - TESTS, PERFORMANCE, SUITABILITY
NF EN 61557-1 : 2007	ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. AND 1500 V D.C. - EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 1: GENERAL REQUIREMENTS
BS EN 1434-1 : 2015	HEAT METERS - PART 1: GENERAL REQUIREMENTS
CSA C22.2 No. 1010.2.061 : 0	SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - PARTICULAR REQUIREMENTS FOR LABORATORY ATOMIC SPECTOMETERS WITH THERMAL ATOMIZATION AND IONIZATION
UNE-EN ISO 18113-5:2012	In vitro diagnostic medical devices - Information supplied by the manufacturer (labelling) - Part 5: In vitro diagnostic instruments for self-testing (ISO 18113-5:2009)
CEI EN 62693 : 2014	INDUSTRIAL ELECTROHEATING INSTALLATIONS - TEST METHODS FOR INFRARED ELECTROHEATING INSTALLATIONS
UNI CEI EN 980 : 2009	SYMBOLS FOR USE IN THE LABELLING OF MEDICAL DEVICES
I.S. EN 60546-1:2010	CONTROLLERS WITH ANALOGUE SIGNALS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS - PART 1: METHODS OF EVALUATING THE PERFORMANCE
IEC 60417-1:2002	Graphical symbols for use on equipment - Part 1: Overview and application
AAMI ES60601-1 : 2005 : INC : AMD 1 : 2012 : R201200	MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD)
AAMI ES60601-1 : 2005 : INC : AMD 2 : 2012 : R201200	MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD)
NFPA 79 : 2018	ELECTRICAL STANDARD FOR INDUSTRIAL MACHINERY
AAMI ES60601-1 : 2005 : R2012	MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD)
EN 285:2015	Sterilization - Steam sterilizers - Large sterilizers
CAN/CSA-C22.2 NO. 61010-031:17	Safety requirements for electrical equipment for measurement, control and laboratory use Part 031: Safety requirements for hand-held and hand-manipulated probe assemblies for electrical test and measurement (Binational standard with UL 61010-031)
IEC 61010-031:2015 RLV	Safety requirements for electrical equipment for measurement, control and laboratory use - Part 031: Safety requirements for hand-held probe assemblies for electrical measurement and test
DIN EN 1422:2014-08	STERILIZERS FOR MEDICAL PURPOSES - ETHYLENE OXIDE STERILIZERS - REQUIREMENTS AND TEST METHODS
DIN EN ISO 11143:2008-10	DENTISTRY - AMALGAM SEPARATORS
IEC 60601-2-9:1996	Medical electrical equipment - Part 2: Particular requirements for the safety of patient contact dosemeters used in radiotherapy with electrically connected radiation detectors
15/30319022 DC : 0	BS EN 60990 ED 3.0 - METHODS OF MEASUREMENT OF TOUCH CURRENT AND PROTECTIVE CONDUCTOR CURRENT
BS EN 60519-1:2015	Safety in installations for electroheating and electromagnetic processing General requirements
ISO 8655-3:2002	Piston-operated volumetric apparatus Part 3: Piston burettes
09/30162904 DC : 0	BS EN 61204-3 - LOW-VOLTAGE POWER SUPPLIES, D.C. OUTPUT - PART 3: ELECTROMAGNETIC COMPATIBILITY (EMC)
PD IEC/TR 62368-2:2015	Audio/video, information and communication technology equipment Explanatory information related to IEC 62368-1
BS EN 61010-2-201:2013	Safety requirements for electrical equipment for measurement, control and laboratory use Particular requirements for control equipment
BS EN 13160-1:2003	Leak detection systems General principles
07/30159711 DC : 0	BS EN 61557-11 - ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. AND 1500 V D.C. - EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 11: EFFECTIVENESS OF RESIDUAL CURRENT MONITORS (RCMS) TYPE A AND TYPE B IN TT, TN AND IT SYSTEMS
ISO 13958:2014	Concentrates for haemodialysis and related therapies
IEC 61969-1:2011	Mechanical structures for electronic equipment - Outdoor enclosures - Part 1: Design guidelines
BS EN 61557-8:2015	Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. Equipment for testing, measuring or monitoring of protective measures Insulation monitoring devices for IT systems
ISO 11135-1:2007	Sterilization of health care products Ethylene oxide Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices
04/30125208 DC : DRAFT NOV 2004	IEC 61557-8 ED.2 - ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. V D.C. EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 8: INSULATION MONITORING DEVICES FOR IT SYSTEMS
BS PD IEC TS 62996 : 2017	INDUSTRIAL ELECTROHEATING AND ELECTROMAGNETIC PROCESSING EQUIPMENT - REQUIREMENTS ON TOUCH CURRENTS, VOLTAGES AND ELECTRIC FIELDS FROM 1 KHZ TO 6 MHZ
13/30238229 DC : 0	BS EN 62052-31 - ELECTRICITY METERING EQUIPMENT (AC) - GENERAL REQUIREMENTS, TEST AND TEST CONDITIONS - PART 31: PRODUCT SAFETY REQUIREMENTS
IEC 60990:2016	Methods of measurement of touch current and protective conductor current
BS EN 12921-1 : 2005	MACHINES FOR SURFACE CLEANING AND PRE-TREATMENT OF INDUSTRIAL ITEMS USING LIQUIDS OR VAPOURS - PART 1: COMMON SAFETY REQUIREMENTS
BS EN 61557-11:2009	Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c.. Equipment for testing, measuring or monitoring of protective measures Effectiveness of residual current monitors (RCMs) type A and type B in TT, TN and IT systems
DIN EN 1422:1997-11	STERILIZERS FOR MEDICAL PURPOSES - ETHYLENE OXIDE STERILIZERS - REQUIREMENTS AND TEST METHODS
DIN EN ISO 8655-2:2002-12	Piston-operated volumetric apparatus - Part 2: Piston pipettes (ISO 8655-2:2002)
EN 61557-14:2013	Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 14: Equipment for testing the safety of electrical equipment of machinery
EN 62052-31:2016	Electricity metering equipment (AC) - General requirements, tests and test conditions - Part 31: Product safety requirements and tests
EN 60770-1:2011	Transmitters for use in industrial-process control systems - Part 1: Methods for performance evaluation
EN 61557-3:2007	Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 3: Loop impedance
EN 62693:2013	Industrial electroheating installations - Test methods for infrared electroheating installations
EN 60974-8:2009	Arc welding equipment - Part 8: Gas consoles for welding and plasma cutting systems
EN 61187:1994/corrigendum:1995	ELECTRICAL AND ELECTRONIC MEASURING EQUIPMENT - DOCUMENTATION
EN 61340-5-1:2016/AC:2017-05	ELECTROSTATICS - PART 5-1: PROTECTION OF ELECTRONIC DEVICES FROM ELECTROSTATIC PHENOMENA - GENERAL REQUIREMENTS (IEC 61340-5-1:2016/COR1:2017)
EN 61243-3:2014/AC:2015	LIVE WORKING - VOLTAGE DETECTORS - PART 3: TWO-POLE LOW-VOLTAGE TYPE
EN 61557-10:2013	Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 10: Combined measuring equipment for testing, measuring or monitoring of protective measures
EN 61207-1:2010	Expression of performance of gas analyzers - Part 1: General
EN 62304:2006/A1:2015	MEDICAL DEVICE SOFTWARE - SOFTWARE LIFE-CYCLE PROCESSES (IEC 62304:2006/A1:2015)
EN 1010-1:2004+A1:2010	Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 1: Common requirements
IEC 61204-3:2016 RLV	Low-voltage switch mode power supplies - Part 3: Electromagnetic compatibility (EMC)
EN 60255-27:2014	Measuring relays and protection equipment - Part 27: Product safety requirements
EN 60519-1:2015	Safety in installations for electroheating and electromagnetic processing - Part 1: General requirements
EN 61180:2016	High-voltage test techniques for low-voltage equipment - Definitions, test and procedure requirements, test equipment
EN 60990:2016	Methods of measurement of touch current and protective conductor current
NF EN 285 : 2016	STERILIZATION - STEAM STERILIZERS - LARGE STERILIZERS
EN 12621:2006+A1:2010	Machinery for the supply and circulation of coating materials under pressure - Safety requirements
EN 61131-2:2007	Programmable controllers - Part 2: Equipment requirements and tests
EN 62586-1:2017	Power quality measurement in power supply systems - Part 1: Power quality instruments (PQI)
EN 61000-4-15:2011	Electromagnetic compatibility (EMC) - Part 4-15: Testing and measurement techniques - Flickermeter - Functional and design specifications
EN 61558-2-16:2009/A1:2013	SAFETY OF TRANSFORMERS, REACTORS, POWER SUPPLY UNITS AND SIMILAR PRODUCTS FOR SUPPLY VOLTAGES UP TO 1 100 V - PART 2-16: PARTICULAR REQUIREMENTS AND TESTS FOR SWITCH MODE POWER SUPPLY UNITS AND TRANSFORMERS FOR SWITCH MODE POWER SUPPLY UNITS (IEC 61558-2-16:2009/A1:2013)
IEC 60601-2-28:2017	Medical electrical equipment - Part 2-28: Particular requirements for the basic safety and essential performance of X-ray tube assemblies for medical diagnosis
EN 61069-7:2016	Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 7: Assessment of system safety
EN 61557-15:2014	Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 15: Functional safety requirements for insulation monitoring devices in IT systems and equipment for insulation fault location in IT systems
EN 61514-2:2013	INDUSTRIAL PROCESS CONTROL SYSTEMS - PART 2: METHODS OF EVALUATING THE PERFORMANCE OF INTELLIGENT VALVE POSITIONERS WITH PNEUMATIC OUTPUTS MOUNTED ON AN ACTUATOR VALVE ASSEMBLY (IEC 61514-2:2013)
EN 62467-1:2015	Medical electrical equipment - Dosimetric instruments as used in brachytherapy - Part 1: Instruments based on well-type ionization chambers
EN 61850-3:2014	Communication networks and systems for power utility automation - Part 3: General requirements
EN 61557-11:2009	Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 11: Effectiveness of residual current monitors (RCMs) type A and type B in TT, TN and IT systems
EN 50495:2010	Safety devices required for the safe functioning of equipment with respect to explosion risks
EN 12921-1:2005+A1:2010	Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 1: Common safety requirements
EN 12693:2008	Refrigerating systems and heat pumps - Safety and environmental requirements - Positive displacement refrigerant compressors
EN 12757-1:2005+A1:2010	Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing
EN 13160-1:2016	Leak detection systems - Part 1: General Principles
EN 62353:2014	Medical electrical equipment - Recurrent test and test after repair of medical electrical equipment
EN 60688:2013	Electrical measuring transducers for converting A.C. and D.C. electrical quantities to analogue or digital signals
A-A-58047 Revision D:2016	SIGNAL GENERATOR
PREN 1422 : DRAFT 2011	STERILIZERS FOR MEDICAL PURPOSES - ETHYLENE OXIDE STERILIZERS - REQUIREMENTS AND TEST METHODS
12/30255394 DC : DRAFT APR 2012	BS EN 62586-1 - POWER QUALITY MEASUREMENT IN POWER SUPPLY SYSTEMS - POWER QUALITY INSTRUMENTS (PQI)
ISO 17593:2007	Clinical laboratory testing and in vitro medical devices Requirements for in vitro monitoring systems for self-testing of oral anticoagulant therapy
AAMI ISO 20857 : 2010	STERILIZATION OF HEALTH CARE PRODUCTS - DRY HEAT - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES
BS EN ISO 20857:2013 (published 2013-04)	Sterilization of health care products. Dry heat. Requirements for the development, validation and routine control of a sterilization process for medical devices
BS EN 61000-4-12:2017	Electromagnetic Compatibility (EMC) Testing and measurement techniques. Ring wave immunity test
BS EN 60146-2:2000	Semiconductor convertors. General requirements and line commutated convertors Self-commutated semiconductor converters including direct d.c. converters
BS EN 60861:2008	Equipment for monitoring of radionuclides in liquid effluents and surface waters
I.S. EN 285:2015	STERILIZATION - STEAM STERILIZERS - LARGE STERILIZERS
BS EN 62693:2013	INDUSTRIAL ELECTROHEATING INSTALLATIONS - TEST METHODS FOR INFRARED ELECTROHEATING INSTALLATIONS
I.S. EN 592:2002	INSTRUCTIONS FOR USE FOR IN VITRO DIAGNOSTIC INSTRUMENTS FOR SELF-TESTING
I.S. EN 62693:2013	INDUSTRIAL ELECTROHEATING INSTALLATIONS - TEST METHODS FOR INFRARED ELECTROHEATING INSTALLATIONS (IEC 62693:2013 (EQV))
12/30262894 DC : 0	BS EN 14180 - STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE STEAM AND FORMALDEHYDE STERILIZERS - REQUIREMENTS AND TESTING
10/30232086 DC : 0	BS EN 61010-2-201 ED 1 - SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - PART 2-201: PARTICULAR REQUIREMENTS FOR INDUSTRIAL-PROCESS MEASUREMENT, CONTROL AND AUTOMATION EQUIPMENT, SPECIFICALLY CONTROL EQUIPMENT EXCLUDING FUNCTIONAL SAFETY)
BS IEC 61275:2013	RADIATION PROTECTION INSTRUMENTATION - MEASUREMENT OF DISCRETE RADIONUCLIDES IN THE ENVIRONMENT - IN SITU PHOTON SPECTROMETRY SYSTEM USING A GERMANIUM DETECTOR
CEI EN 61028 : 1998	ELECTRICAL MEASURING INSTRUMENTS - X-Y RECORDERS
UNE-EN 50463-1:2013	Railway applications - Energy measurement on board trains - Part 1: General
CSA CEI/IEC 61000.4.12 : 2001	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4: TESTING AND MEASUREMENT TECHNIQUES - SECTION 12: OSCILLATORY WAVES IMMUNITY TEST BASIC EMC PUBLICATION
BS EN 50463-1:2017	Railway applications. Energy measurement on board trains General
BS EN 12830:1999	TEMPERATURE RECORDERS FOR THE TRANSPORT, STORAGE AND DISTRIBUTION OF CHILLED, FROZEN, DEEP-FROZEN/QUICK-FROZEN FOOD AND ICE CREAM - TESTS, PERFORMANCE AND SUITABILITY
BS IEC 63004:2015	STANDARD FOR RECEIVER FIXTURE INTERFACE
NF EN 61557-8 : 2015	ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. AND 1500 V D.C. - EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 8: INSULATION MONITORING DEVICES FOR IT SYSTEMS
DIN EN 14154-4:2015-02	Water meters - Part 4: Additional functionalities
CEI EN 60731 : 2012	MEDICAL ELECTRICAL EQUIPMENT - DOSIMETERS WITH IONIZATION CHAMBERS AS USED IN RADIOTHERAPY
NF EN 62598 : 2013	NUCLEAR INSTRUMENTATION - CONSTRUCTIONAL REQUIREMENTS AND CLASSIFICATION OF RADIOMETRIC GAUGES
OIML R 128 : 2000	ERGOMETERS FOR FOOT CRANK WORK
14/30280175 DC : 0	BS EN 61204-7 - LOW-VOLTAGE SWITCH MODE POWER SUPPLIES - PART 7: SAFETY REQUIREMENTS
BS IEC 61010-3.1 : 1997
08/30178660 DC : DRAFT FEB 2008	BS EN 60546-1 - CONTROLLERS WITH ANALOGUE SIGNALS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS - PART 1: METHODS OF EVALUATING THE PERFORMANCE
CSA C22.2 No. 60601.1.1 : 2002 : R2011	MEDICAL ELECTRICAL EQUIPMENT - PART 1-1: GENERAL REQUIREMENTS FOR SAFETY - COLLATERAL STANDARD: SAFETY REQUIREMENTS FOR MEDICAL ELECTRICAL SYSTEMS
BS EN 61000-4-7 : 2002	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-7: TESTING AND MEASUREMENT TECHNIQUES - GENERAL GUIDE ON HARMONICS AND INTERHARMONICS MEASUREMENTS AND INSTRUMENTATION, FOR POWER SUPPLY SYSTEMS AND EQUIPMENT CONNECTED THERETO
BS EN 61207-1:2010	Expression of performance of gas analyzers General
11/30252448 DC : 0	BS EN 1422 - STERILIZERS FOR MEDICAL PURPOSES - ETHYLENE OXIDE STERILIZERS - REQUIREMENTS AND TEST METHODS
08/30152625 DC : DRAFT APR 2008	BS ISO 16110-2 - HYDROGEN GENERATORS USING FUEL PROCESSING TECHNOLOGIES - PART 2: PROCEDURES TO DETERMINE EFFICIENCY
BS EN 61557-6:1998	ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. AND 1500 V D.C. - EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 6: EFFECTIVENESS OF RESIDUAL CURRENT DEVICES (RCD) IN TT, TN AND IT SYSTEMS
06/30146526 DC : 0	BS ISO 18113-5 - CLINICAL LABORATORY TESTING AND IN VITRO DIAGNOSTIC MEDICAL SYSTEMS - INFORMATION SUPPLIED BY THE MANUFACTURER (LABELLING) - PART 5: IN VITRO DIAGNOSTIC INSTRUMENTS FOR SELF-TESTING
CEI EN 60730-2-7 : 2012	AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2: PARTICULAR REQUIREMENTS FOR TIMERS AND TIME SWITCHES
14/30287753 DC : 0	BS EN 62304 AMENDMENT 1 - MEDICAL DEVICE SOFTWARE - SOFTWARE LIFE CYCLE PROCESSES
11/30241212 DC : DRAFT JAN 2011	BS EN 60688 - ELECTRICAL MEASURING TRANSDUCERS FOR CONVERTING A.C. ELECTRICAL QUANTITIES TO ANALOGUE OR DIGITAL SIGNALS
14/30301251 DC : 0	BS EN 13160-1 - LEAK DETECTION SYSTEMS - PART 1: GENERAL PRINCIPLES
BS EN 60519-12:2013	SAFETY IN ELECTROHEATING INSTALLATIONS - PART 12: PARTICULAR REQUIREMENTS FOR INFRARED ELECTROHEATING INSTALLATIONS
NF EN 60770-1 : 2011	TRANSMITTERS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS - PART 1: METHODS FOR PERFORMANCE EVALUATION
NF EN 61557-11 : 2009	ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. AND 1500 V D.C. - EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 11: EFFECTIVENESS OF RESIDUAL CURRENT MONITORS (RCMS) TYPE A AND TYPE B IN TT, TN AND IT SYSTEMS
DIN ISO 2954:2012-10	Mechanical vibration of rotating and reciprocating machinery - Requirements for instruments for measuring vibration severity (ISO 2954:2012)
I.S. EN ISO 11135:2014	STERILIZATION OF HEALTH-CARE PRODUCTS - ETHYLENE OXIDE - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES (ISO 11135:2014)
AAMI ST63 : 2002	STERILIZATION OF HEALTH CARE PRODUCTS - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF AN INDUSTRIAL STERILIZATION PROCESS FOR MEDICAL DEVICES - DRY HEAT
11/30244091 DC : 0	BS EN ISO 11135 - STERILIZATION OF HEALTH-CARE PRODUCTS - ETHYLENE OXIDE - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES
PD IEC TR 60825-14:2004	Safety of laser products A user\'s guide
11/30250287 DC : 0	BS EN 60255-27 - MEASURING RELAYS AND PROTECTION EQUIPMENT - PART 27: PRODUCT SAFETY REQUIREMENTS
BS EN 61969-1:2012	MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT - OUTDOOR ENCLOSURES - PART 1: DESIGN GUIDELINES
11/30193150 DC : 0	BS EN 60601-1:2006 AMD.1 - MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE
13/30278676 DC : 0	BS EN 285 - STERILIZATION - STEAM STERILIZERS - LARGE STERILIZERS
I.S. EN 60051-1:2017	DIRECT ACTING INDICATING ANALOGUE ELECTRICAL MEASURING INSTRUMENTS AND THEIR ACCESSORIES - PART 1: DEFINITIONS AND GENERAL REQUIREMENTS COMMON TO ALL PARTS - PROPOSED HORIZONTAL STANDARD
11/30205433 DC : 0	BS EN 61275 - RADIATION PROTECTION INSTRUMENTATION - MEASUREMENT OF DISCRETE RADIONUCLIDES IN THE ENVIRONMENT - IN-SITU PHOTON SPECTROMETRY SYSTEM USING A GERMANIUM DETECTOR
DIN EN ISO 13958:2016-03	CONCENTRATES FOR HAEMODIALYSIS AND RELATED THERAPIES (ISO 13958:2014)
BS EN 62586-1:2017	Power quality measurement in power supply systems Power quality instruments (PQI)
98/125140 DC : DRAFT OCT 98	DRAFT BS EN ISO 8655-2 - PISTON-OPERATED VOLUMETRIC INSTRUMENTS - PART 2: PISTON PIPETTES
10/30219049 DC : 0	BS EN 62638 - RECURRENT TEST AND TEST AFTER REPAIR AND MODIFICATION OF ELECTRICAL EQUIPMENT
CEI EN 50249 : 2003	ELECTROMAGNETIC LOCATORS FOR BURIED PIPES AND CABLES - PERFORMANCE AND SAFETY
13/30270468 DC : 0	BS ISO 13958 - CONCENTRATES FOR HAEMODIALYSIS AND RELATED THERAPIES
15/30329543 DC : 0	BS EN 50463-1 - RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS - PART 1: GENERAL
CEI EN 61040 : 1998	POWER AND ENERGY MEASURING DETECTORS, INSTRUMENTS AND EQUIPMENT FOR LASER RADIATION
16/30340202 DC : 0	BS EN 61000-4-12 ED3.0 - ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-12: TESTING AND MEASUREMENT TECHNIQUES - RING WAVE IMMUNITY TEST
04/30125174 DC : DRAFT NOV 2004	IEC 61557-1 ED2 - ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. V D.C. EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 1: GENERAL REQUIREMENTS
BS EN 12693:2008	Refrigerating systems and heat pumps. Safety and environmental requirements. Positive displacement refrigerant compressors
PD IEC/TR 62296:2009
I.S. EN 60405:2007	NUCLEAR INSTRUMENTATION - CONSTRUCTIONAL REQUIREMENTS AND CLASSIFICATION OF RADIOMETRIC GAUGES
CEI EN 60974-8 : 2011	ARC WELDING EQUIPMENT - PART 8: GAS CONSOLES FOR WELDING AND PLASMA CUTTING SYSTEMS
BS 7012-10.1:1998	LIGHT MICROSCOPES - MINIMUM REQUIREMENTS FOR STEREO MICROSCOPES - STEREO MICROSCOPES FOR GENERAL USE
I.S. EN 60255-27:2014	MEASURING RELAYS AND PROTECTION EQUIPMENT - PART 27: PRODUCT SAFETY REQUIREMENTS
CSA IEC 61000-4-7 : 2013	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-7: TESTING AND MEASUREMENT TECHNIQUES - GENERAL GUIDE ON HARMONICS AND INTERHARMONICS MEASUREMENTS AND INSTRUMENTATION, FOR POWER SUPPLY SYSTEMS AND EQUIPMENT CONNECTED THERETO
EN 61784-3-3:2017	Industrial communication networks - Profiles - Part 3-3: Functional safety fieldbuses - Additional specifications for CPF 3
DIN EN 61557-4 : 2007	ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. AND 1500 V D.C. - EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 4: RESISTANCE OF EARTH CONNECTION AND EQUIPOTENTIAL BONDING
I.S. EN 61000-4-18:2007	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-18: TESTING AND MEASUREMENT TECHNIQUES - DAMPED OSCILLATORY WAVE IMMUNITY TEST
CAN/CSA-IEC 61000-4-7:13 (R2017)	Electromagnetic compatibility (EMC) - Part 4-7: Testing and measurement techniques - General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto (Adopted IEC 61000-4-7:2002, edition 2:2002 consolidated with amendment 1:2008) \| Compatibilité électromagnétique (CEM) - Partie 4-7: Techniques d\'essai et de mesure - Guide général relatif aux mesures d\'harmoniques et d\'interharmoniques, ainsi qu\'à l\'appareillage de mesure, applicable aux réseaux d\'alimentation et aux appareils qui y sont raccordés (norme CEI 61000-4-7:2002 adoptée, édition 2:2002 consolidée par l\'amendement 1:2008)
NF EN 61850-3 : 2014	COMMUNICATION NETWORKS AND SYSTEMS FOR POWER UTILITY AUTOMATION - PART 3: GENERAL REQUIREMENTS
DIN EN 14154-4 E : 2015	WATER METERS - PART 4: ADDITIONAL FUNCTIONALITIES
SAE AS 6479 : 2014	SPLICER, FUSION, FIBER OPTIC, AEROSPACE
UNE-EN 61557-12:2010	Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures -- Part 12: Performance measuring and monitoring devices (PMD)
AAMI ISO 13958 : 2009	CONCENTRATES FOR HEMODIALYSIS AND RELATED THERAPIES
CSA Z15190 : 2005	MEDICAL LABORATORIES - REQUIREMENTS FOR SAFETY
DIN 51900-3:2005-01	Testing of solid and liquid fuels - Determination of gross calorific value by the bomb calorimeter and calculation of net calorific value - Part 3: Method using adiabatic jacket
IEC 60519-12:2016	Safety in installations for electroheating and electromagnetic processing - Part 12: Particular requirements for infrared electroheating
NF EN 50463-1 : 2013	RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS - PART 1: GENERAL
EN IEC 61204-7:2018	Low-voltage switch mode power supplies - Part 7: Safety requirements
IEC 62438:2010	Radiation protection instrumentation - Mobile instrumentation for the measurement of photon and neutron radiation in the environment
IEC 61204-7:2016 EXV	LOW-VOLTAGE SWITCH MODE POWER SUPPLIES - PART 7: SAFETY REQUIREMENTS
EN IEC 61730-2:2018/AC:2018-06	PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 2: REQUIREMENTS FOR TESTING (IEC 61730-2:2016)
BS EN 61243-3:2014 (published 2015-02)	Live working. Voltage detectors Two-pole low-voltage type
CEI EN 50463-1 : 2013	RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS - PART 1: GENERAL
ISO 2954:2012	Mechanical vibration of rotating and reciprocating machinery — Requirements for instruments for measuring vibration severity
CEI EN 61557-13 : 2012	ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. AND 1500 V D.C. - EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 13: HAND-HELD AND HAND-MANIPULATED CURRENT CLAMPS AND SENSORS FOR MEASUREMENT OF LEAKAGE CURRENTS IN ELECTRICAL DISTRIBUTION SYSTEMS
I.S. EN 61558-2-16:2009	SAFETY OF TRANSFORMERS, REACTORS, POWER SUPPLY UNITS AND SIMILAR PRODUCTS FOR SUPPLY VOLTAGES UP TO 1100 V - PART 2-16: PARTICULAR REQUIREMENTS AND TESTS FOR SWITCH MODE POWER SUPPLY UNITS AND TRANSFORMERS FOR SWITCH MODE POWER SUPPLY UNITS
I.S. EN 62353:2014	MEDICAL ELECTRICAL EQUIPMENT - RECURRENT TEST AND TEST AFTER REPAIR OF MEDICAL ELECTRICAL EQUIPMENT
CEI EN 60601-2-9 : 1998	MEDICAL ELECTRICAL EQUIPMENT - PART 2: PARTICULAR REQUIREMENTS FOR THE SAFETY OF PATIENT CONTACT DOSEMETERS USED IN RADIOTHERAPY WITH ELECTRICALLY CONNECTED RADIATION DETECTORS
I.S. EN 13060:2014	SMALL STEAM STERILIZERS
I.S. EN 61850-3:2014	COMMUNICATION NETWORKS AND SYSTEMS FOR POWER UTILITY AUTOMATION - PART 3: GENERAL REQUIREMENTS
AAMI ST24 : 1999 : R2005	AUTOMATIC, GENERAL-PURPOSE ETHYLENE OXIDE STERILIZERS AND ETHYLENE OXIDE STERILANT SOURCES INTENDED FOR USE IN HEALTH CARE FACILITIES
I.S. EN 1434-1:2015	HEAT METERS - PART 1: GENERAL REQUIREMENTS
EN 50463-1:2017	Railway applications - Energy measurement on board trains - Part 1: General
BS EN 61010-031:2015	Safety requirements for electrical equipment for measurement, control and laboratory use Safety requirements for hand-held probe assemblies for electrical measurement and test
I.S. EN 61131-2:2007	PROGRAMMABLE CONTROLLERS - PART 2: EQUIPMENT REQUIREMENTS AND TESTS
ISO 12649:2004	Graphic technology Safety requirements for binding and finishing systems and equipment
C22.1-15 PACKAGE	Consists of C22.1-15, Canadian electrical code, part I (23rd edition), safety standard for electrical installations; C22.1HB-15, Canadian electrical code handbook - an explanation of rules of the Canadian electrical code, part I and the 2015 Electrical quick reference
I.S. EN 60873-2:2004	ELECTRICAL AND PNEUMATIC ANALOGUE CHART RECORDERS FOR USE IN INDUSTRIAL PROCESS CONTROL SYSTEMS; PART 2: GUIDANCE FOR INSPECTION AND ROUTINE TESTING
I.S. EN 60974-8:2009	ARC WELDING EQUIPMENT - PART 8: GAS CONSOLES FOR WELDING AND PLASMA CUTTING SYSTEMS
IEC 62523:2010	Radiation protection instrumentation - Cargo/vehicle radiographic inspection system
CSA C22.2 No. 601.1.1 : 2000	MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR SAFETY - 1: COLLATERAL STANDARD: SAFETY REQUIREMENTS FOR MEDICAL ELECTRICAL SYSTEMS
EN 61010-2-043 : 1997	SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PARTICULAR REQUIREMENTS FOR DRY HEAT STERILIZERS USING EITHER HOT AIR OR HOT INERT GAS FOR THE TREATMENT OF MEDICAL MATERIALS, AND FOR LABORATORY PROCESSES
UNE-EN ISO 13958:2016	Concentrates for haemodialysis and related therapies (ISO 13958:2014)
I.S. EN 61204-7:2006	LOW VOLTAGE POWER SUPPLIES, D.C. OUTPUT - PART 7: SAFETY REQUIREMENTS
I.S. EN 61340-5-2:1999	ELECTROSTATICS - PART 5-2: PROTECTION OF ELECTRONIC DEVICES FROM ELECTROSTATIC PHENOMENA - USER GUIDE
AAMI/IEC TIR80001-2-5:2014	APPLICATION OF RISK MANAGEMENT FOR IT-NETWORKS INCORPORATING MEDICAL DEVICES - PART 2-5: APPLICATION GUIDANCE - GUIDANCE ON DISTRIBUTED ALARM SYSTEMS
IEC TR 62296:2009	Considerations of unaddressed safety aspects in the second edition of IEC 60601-1 and proposals for new requirements
I.S. EN 61557-2:2007	ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. AND 1500 V D.C. - EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 2: INSULATION RESISTANCE
ANSI/AAMI/IEC TIR62354:2015	GENERAL TESTING PROCEDURES FOR MEDICAL ELECTRICAL EQUIPMENT
IEC 61340-5-1 REDLINE : 2ED 2016	ELECTROSTATICS - PART 5-1: PROTECTION OF ELECTRONIC DEVICES FROM ELECTROSTATIC PHENOMENA - GENERAL REQUIREMENTS
I.S. EN 61340-5-1:2016	ELECTROSTATICS - PART 5-1: PROTECTION OF ELECTRONIC DEVICES FROM ELECTROSTATIC PHENOMENA - GENERAL REQUIREMENTS
IEC 60051-1:2016	Direct acting indicating analogue electrical measuring instruments and their accessories - Part 1: Definitions and general requirements common to all parts
IEC 60601-2-28:2017 RLV	Medical electrical equipment - Part 2-28: Particular requirements for the basic safety and essential performance of X-ray tube assemblies for medical diagnosis
AAMI ES60601-1 : 2005	MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD)
I.S. EN 61557-5:2007	ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. AND 1500 V D.C. - EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 5: RESISTANCE TO EARTH
IEC 60204-33:2009	Safety of machinery - Electrical equipment of machines - Part 33: Requirements for semiconductor fabrication equipment
DIN EN 1010-1:2011-06	Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 1: Common requirements (includes Amendment A1:2010)
DIN EN 1012-2:2011-12	Compressors and vacuum pumps - Safety requirements - Part 2: Vacuum pumps
DIN EN 12621:2011-07	Machinery for the supply and circulation of coating materials under pressure - Safety requirements (includes Amendment A1:2010)
DIN EN 12981:2010-06	COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC POWDER COATING MATERIAL - SAFETY REQUIREMENTS
IEC 61000-4-15:2010	Electromagnetic compatibility (EMC) - Part 4-15: Testing and measurement techniques - Flickermeter - Functional and design specifications
IEC 61000-4-18:2006+AMD1:2010 CSV	Electromagnetic compatibility (EMC) - Part 4-18: Testing and measurement techniques - Damped oscillatory wave immunity test
IEC 62353:2014	Medical electrical equipment - Recurrent test and test after repair of medical electrical equipment
BS EN 61131-2:2007	PROGRAMMABLE CONTROLLERS - PART 2: EQUIPMENT REQUIREMENTS AND TESTS
ISO 11143:2008	Dentistry Amalgam separators
BS EN 12757-1 : 2005	MIXING MACHINERY FOR COATING MATERIALS - SAFETY REQUIREMENTS - PART 1: MIXING MACHINERY FOR USE IN VEHICLE REFINISHING
BS EN ISO 15212-2:2002	OSCILLATION-TYPE DENSITY METERS - PART 2: PROCESS INSTRUMENTS FOR HOMOGENEOUS LIQUIDS
BS EN 12981 : 2005	COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC POWDER COATING MATERIAL - SAFETY REQUIREMENTS
ISO 8655-5:2002	Piston-operated volumetric apparatus Part 5: Dispensers
BS EN 60825-1:2014	Safety of laser products Equipment classification and requirements
I.S. EN ISO 15197:2015	IN VITRO DIAGNOSTIC TEST SYSTEMS - REQUIREMENTS FOR BLOOD-GLUCOSE MONITORING SYSTEMS FOR SELF-TESTING IN MANAGING DIABETES MELLITUS (ISO 15197:2013)
I.S. EN 12757-1:2005	MIXING MACHINERY FOR COATING MATERIALS - SAFETY REQUIREMENTS - PART 1: MIXING MACHINERY FOR USE IN VEHICLE REFINISHING
I.S. EN ISO 11143:2008	DENTISTRY - AMALGAM SEPARATORS
IEC 61000-4-12:2017	Electromagnetic Compatibility (EMC) - Part 4-12: Testing and measurement techniques - Ring wave immunity test
I.S. EN 12981:2005	COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC POWDER COATING MATERIAL - SAFETY REQUIREMENTS
I.S. EN 12621:2006	MACHINERY FOR THE SUPPLY AND CIRCULATION OF COATING MATERIALS UNDER PRESSURE - SAFETY REQUIREMENTS
I.S. EN 13160-1:2016	LEAK DETECTION SYSTEMS - PART 1: GENERAL PRINCIPLES
I.S. EN 61918:2013	INDUSTRIAL COMMUNICATION NETWORKS - INSTALLATION OF COMMUNICATION NETWORKS IN INDUSTRIAL PREMISES
I.S. EN 14180:2014	STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE STEAM AND FORMALDEHYDE STERILIZERS - REQUIREMENTS AND TESTING