IEC 61057:2017
Current
The latest, up-to-date edition.
Live working - Insulating aerial devices for mounting on a chassis
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
English - French, Spanish, Castilian
19-06-2017
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms and definitions
4 Specific terms and nomenclature
5 Requirements
6 Tests
7 Conformance testing of aerial devices after completion
of the production phase
8 Modifications
Annex A (informative) - Guidelines for selecting the
characteristics of insulating aerial devices as a
function of the live working methods
Annex B (normative) - Suitable for live working; double
triangle IEC-60417-5216:2002-10
Annex C (normative) - General type test procedure
Annex D (normative) - Classification of defects and tests
to be allocated
Annex E (informative) - Care and maintenance
Annex F (informative) - Hydraulic depressurization
(vacuum protection)
Bibliography
IEC 61057:2017 is applicable to insulating aerial devices for mounting on a chassis, to be used for live working on electrical installations at nominal voltages above 1 000V r.m.s. AC in the range 45 Hz to 65 Hz and 1 500V DC. This second edition cancels and replaces the first edition published in 1991 and IEC TS 61813:2000. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) general review of the requirements and test provisions;
b) preparation of the elements of evaluation of defects, and general application of IEC 61318:2007;
c) distinguishes between tests for hollow booms and those for foam filled booms;
d) references ISO 16368 for particular mechanical tests;
e) further information on vacuum protection and leakage current monitoring and a mandatory requirement that aerial devices for bare hand work be fitted with a permanently installed lower test electrode system;
f) controls of high electrical resistance;
g) reference to SAE for insulating hydraulic hoses;
h) inclusion of IEC TS 61813 for care, maintenance and in-service testing of aerial devices with insulating booms.
Committee |
TC 78
|
DevelopmentNote |
Supersedes IEC TS 61813. Stability Date: 2019. (06/2017)
|
DocumentType |
Standard
|
Pages |
177
|
PublisherName |
International Electrotechnical Committee
|
Status |
Current
|
Supersedes |
Standards | Relationship |
UNE-EN 61057:1996 | Identical |
EN 61057:2017 | Identical |
NEN EN IEC 61057 : 2017 | Identical |
IS 14957:2021 | Identical |
BS EN 61057:1994 | Identical |
VDE 0682-741 : 2018 | Identical |
NEN 11057 : 1995 | Identical |
DIN EN 61057 : 2018 | Identical |
NEN IEC 61057 : 95 C1 2000 | Identical |
NF EN 61057 : 2017 | Identical |
UNE-EN 61057:2018 | Identical |
BIS IS 14957 : 2001 | Identical |
PN EN 61057 : 2018 | Identical |
BS EN 61057:2017 | Identical |
SN EN 61057 : 1993 | Identical |
CEI EN 61057 : 2018 | Identical |
I.S. EN 50110-1:2013 | OPERATION OF ELECTRICAL INSTALLATIONS - PART 1: GENERAL REQUIREMENTS |
ISO 18893:2014 | Mobile elevating work platforms — Safety principles, inspection, maintenance and operation |
UNI ISO 18893 : 2011 | MOBILE ELEVATING WORK PLATFORMS - SAFETY PRINCIPLES, INSPECTION, MAINTENANCE AND OPERATION |
02/708844 DC : DRAFT JULY 2002 | ISO/DIS 16368.4 - MOBILE ELEVATING WORK PLATFORMS - DESIGN CALCULATIONS, SAFETY REQUIREMENTS AND TEST METHODS |
02/206916 DC : DRAFT MAY 2002 | IEC 62237. ED.1 - LIVE WORKING - INSULATING HOSES FOR USE WITH HYDRAULIC TOOLS AND EQUIPMENT |
CSA B354.7 & B354.8 PACKAGE : 0 | CONSISTS OF CAN/CSA-B354.7:17, MOBILE ELEVATING WORK PLATFORMS - SAFETY PRINCIPLES, INSPECTION, MAINTENANCE AND OPERATION, AND CAN/CSA-B354.8:17, MOBILE ELEVATING WORK PLATFORMS - OPERATOR (DRIVER) TRAINING |
CLC/TR 50488:2006 | Railway applications - Safety measures for the personnel working on or near overhead contact lines |
CEI EN 50110-1 : 2014 | OPERATION OF ELECTRICAL INSTALLATIONS - PART 1: GENERAL REQUIREMENTS |
BS IEC TS 61813:2000 | Live working. Care, maintenance and in-service testing of aerial devices with insulating booms |
ISO 16653-2:2009 | Mobile elevating work platforms Design, calculations, safety requirements and test methods relative to special features Part 2: MEWPs with non-conductive (insulating) components |
IEC TS 61813:2000 | Live working - Care, maintenance and in-service testing of aerial devices with insulating booms |
UNI ISO 16653-2 : 2011 | MOBILE ELEVATING WORK PLATFORMS - DESIGN, CALCULATIONS, SAFETY REQUIREMENTS AND TEST METHODS RELATIVE TO SPECIAL FEATURES - PART 2: MEWPS WITH NON-CONDUCTIVE (INSULATING) COMPONENTS |
CEI CLC/TR 50488 : 2007 | RAILWAY APPLICATIONS - SAFETY MEASURES FOR PERSONNEL WORKING NEAR OVERHEAD CONTACT LINES |
UNE-EN 50110-1:2014 | Operation of electrical installations - Part 1: General requirements |
ISO 16368:2010 | Mobile elevating work platforms Design, calculations, safety requirements and test methods |
BS ISO 16368:2003 | Mobile elevating work platforms. Design calculations, safety requirements and test methods |
BS EN 50110-1:2013 | Operation of electrical installations General requirements |
BS ISO 18893:2004 | Mobile elevating work platforms. Safety principles, inspection, maintenance and operation |
CAN/CSA-B354.6:17 | Mobile elevating work platforms — Design, calculations, safety requirements, and test methods (Adopted ISO 16368:2010, second edition , 2010-05-15, with Canadian deviations) |
S.R. CLC TR 50488:2007 | RAILWAY APPLICATIONS - SAFETY MEASURES FOR THE PERSONNEL WORKING ON OR NEAR OVERHEAD CONTACT LINES |
EN 50110-1:2013 | Operation of electrical installations - Part 1: General requirements |
IEC 61865:2001 | Overhead lines - Calculation of the electrical component of distance between live parts and obstacles - Method of calculation |
IEC 60060-2:2010 | High-voltage test techniques - Part 2: Measuring systems |
ISO 18893:2014 | Mobile elevating work platforms — Safety principles, inspection, maintenance and operation |
IEC 61472:2013 | Live working - Minimum approach distances for a.c. systems in the voltage range 72,5 kV to 800 kV - A method of calculation |
IEC 60270:2000+AMD1:2015 CSV | High-voltage test techniques - Partial discharge measurements |
SAE J 517 : 2016 | HYDRAULIC HOSE |
IEC 60212:2010 | Standard conditions for use prior to and during the testing of solid electrical insulating materials |
ISO 4302:2016 | Cranes — Wind load assessment |
IEC 61235:1993 | Live working - Insulating hollow tubes for electrical purposes |
IEC 60855-1:2016 | Live working - Insulating foam-filled tubes and solid rods - Part 1: Tubes and rods of a circular cross-section |
ASTM F 914 : 2003 | Standard Test Method for Acoustic Emission for Insulated and Non-Insulated Aerial Personnel Devices Without Supplemental Load Handling Attachments |
IEC 60743:2013 | Live working - Terminology for tools, devices and equipment |
IEC 61109:2008 | Insulators for overhead lines - Composite suspension and tension insulators for a.c. systems with a nominal voltage greater than 1 000 V - Definitions, test methods and acceptance criteria |
IEC 62237:2003 | Live working - Insulating hoses with fittings for use with hydraulic tools and equipment |
ISO 16368:2010 | Mobile elevating work platforms Design, calculations, safety requirements and test methods |
SAE J 343 : 2016 | TEST AND TEST PROCEDURES FOR SAE 100R SERIES HYDRAULIC HOSE AND HOSE ASSEMBLIES |
ISO 4305:2014 | Mobile cranes — Determination of stability |
IEC 61318:2007 | Live working - Conformity assessment applicable to tools, devices and equipment |
ISO 13850:2015 | Safety of machinery Emergency stop function Principles for design |
IEC 60050-651:2014 | International Electrotechnical Vocabulary (IEV) - Part 651: Live working |
IEC 60060-1:2010 | High-voltage test techniques - Part 1: General definitions and test requirements |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.