IEC 61140:2016

Current

Current The latest, up-to-date edition.

Protection against electric shock - Common aspects for installation and equipment

Available format(s): Hardcopy, PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

Language(s): English - French, Spanish, Castilian

Published date: 07-01-2016

Publisher: International Electrotechnical Committee

Table of Contents - (Show below) - (Hide below)

FOREWORD
1 Scope
2 Normative references
3 Terms and definitions
4 Fundamental rule of protection against electric shock
5 Protective provisions (elements of protective measures)
6 Protective measures
7 Co-ordination between electrical equipment and
  protective provisions within an electrical installation
8 Special operating and servicing conditions
Annex A (informative) - Survey of protective measures
        as implemented by protective provisions
Annex B (informative) - Index of terms
Annex C (informative) - List of notes concerning certain
        countries
Bibliography

Abstract - (Show below) - (Hide below)

IEC 61140:2016 is available as IEC 61140:2016 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.

IEC 61140:2016 applies to the protection of persons and livestock against electric shock. The intent is to give fundamental principles and requirements which are common to electrical installations, systems and equipment or necessary for their coordination, without limitations with regard to the magnitude of the voltage or current, or the type of current, and for frequencies up to 1 000 Hz. It has the status of a basic safety publication in accordance with IEC Guide 104. This fourth edition cancels and replaces the third edition published in 2001 and Amendment 1:2004. This edition constitutes a technical revision.

General Product Information - (Show below) - (Hide below)

Committee	TC 64
Development Note	Supersedes IEC 60536 and IEC 60536-2. (03/2001) Stability date: 2025. (01/2016) Supersedes IEC 60449. (05/2016)
Document Type	Standard
ISBN
Pages
Published
Publisher	International Electrotechnical Committee
Status	Current
Supersedes	IEC 60449:1973 IEC 61140:2001+AMD1:2004 CSV IEC 61140:2001 IEC 61140:2001/AMD1:2004

International Equivalents – Equivalent Standard(s) & Relationship - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
NEN EN IEC 61140 : 2016	Identical
SANS 61140 : 2ED 2016	Identical
SN EN 61140:2016	Identical
DIN EN 61140 : 2016-11	Identical
VDE 0140-1:2016-11	Identical
UNE-EN 61140:2017	Identical
BS EN 61140 : 2002	Identical
EN 61140:2016	Identical
BS EN 61140:2016	Identical
DIN IEC 61140 : DRAFT AMD 1 2003	Identical
PN-EN 61140:2016-07	Identical
GOST IEC 61140 : 2012 ERRATA 2014	Identical
GOST R IEC 61140 : 2000	Identical

Standards Referenced By This Book - (Show below) - (Hide below)

BS IEC 60092-202:2016 (published 2016-09)	Electrical installations in ships System design. Protection
I.S. EN 60092-507:2015	ELECTRICAL INSTALLATIONS IN SHIPS - PART 507: SMALL VESSELS
I.S. EN 50090-2-2:1998	HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) - PART 2-2: SYSTEM OVERVIEW - GENERAL TECHNICAL REQUIREMENTS
UNE-EN 60947-5-3:2014	Low-voltage switchgear and controlgear - Part 5-3: Control circuit devices and switching elements - Requirements for proximity devices with defined behaviour under fault conditions (PDDB)
AAMI IEC TIR 60878 : 2003	GRAPHICAL SYMBOLS FOR ELECTRICAL EQUIPMENT IN MEDICAL PRACTICE
12/30240603 DC : 0	BS EN 60320-1 ED 3.0 - APPLIANCE COUPLERS FOR HOUSEHOLD AND SIMILAR GENERAL PURPOSES - PART 1: GENERAL REQUIREMENTS
15/30259978 DC : 0	BS EN 62477-2 - SAFETY REQUIREMENTS FOR POWER ELECTRONIC CONVERTER SYSTEMS AND EQUIPMENT - PART 2: POWER ELECTRONIC CONVERTERS FROM 1000 V A.C. OR 1500 V D.C. UP TO 36 KV A.C. OR 54 KV D.C.
11/30243697 DC : 0	BS IEC 62718 - RAILWAY APPLICATIONS - ROLLING STOCK - D.C. SUPPLIED ELECTRONIC BALLASTS FOR LIGHTING FLUORESCENT LAMPS
13/30292538 DC : 0	BS EN 60092-507 ED 3.0 - ELECTRICAL INSTALLATIONS IN SHIPS - PART 507: SMALL VESSELS
PREN ISO 5826 : DRAFT 2012	RESISTANCE WELDING EQUIPMENT - TRANSFORMERS - GENERAL SPECIFICATIONS APPLICABLE TO ALL TRANSFORMERS (ISO/DIS 5826:2012)
IEC 62930:2017	Electric cables for photovoltaic systems with a voltage rating of 1,5 kV DC
13/30284484 DC : 0	BS CISPR 14-1 ED 6 - REQUIREMENTS FOR HOUSEHOLD APPLIANCES, ELECTRIC TOOLS AND SIMILAR APPARATUS - PART 1: EMISSION
I.S. EN 61995-1:2008	DEVICES FOR THE CONNECTION OF LUMINAIRES FOR HOUSEHOLD AND SIMILAR PURPOSES - PART 1: GENERAL REQUIREMENTS
PD IEC/TR 60878:2015	Graphical symbols for electrical equipment in medical practice
CEI EN 50065-4-1 : 2002	SIGNALLING ON LOW-VOLTAGE ELECTRICAL INSTALLATIONS IN THE FREQUENCY RANGE 3 KHZ TO 148,5 KHZ - PART 4-1: LOW-VOLTAGE DECOUPLING FILTERS - GENERIC SPECIFICATION
CEI EN 61310-2 : 2008	SAFETY OF MACHINERY - INDICATION, MARKING AND ACTUATION - PART 2: REQUIREMENTS FOR MARKING
BS EN 60079-5:2015	Explosive atmospheres Equipment protection by powder filling \'q\'
BS EN 61969-3 : 2012	MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT - OUTDOOR ENCLOSURES - PART 3: ENVIRONMENTAL REQUIREMENTS, TESTS AND SAFETY ASPECTS
16/30336300 DC : 0	BS EN 60799 - ELECTRICAL ACESSORIES - CORD SETS AND INTERCONNECTION CORD SETS
BS EN 61310-2 : 2008	SAFETY OF MACHINERY - INDICATION, MARKING AND ACTUATION - PART 2: REQUIREMENTS FOR MARKING
BS EN ISO 12696:2016	Cathodic protection of steel in concrete
IEC 60204-1:2016	Safety of machinery - Electrical equipment of machines - Part 1: General requirements
04/30097421 DC : DRAFT APR 2004	IEC 60950-1 ED.2 - INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
I.S. EN 60947-5-1:2017	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-1: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - ELECTROMECHANICAL CONTROL CIRCUIT DEVICES
CLC/TS 62603-1 : 2014	Industrial process control systems - Guideline for evaluating process control systems - Part 1: Specifications
EN 61577-2 : 2017	RADIATION PROTECTION INSTRUMENTATION - RADON AND RADON DECAY PRODUCT MEASURING INSTRUMENTS - PART 2: SPECIFIC REQUIREMENTS FOR [222]RN AND [220]RN MEASURING INSTRUMENTS (IEC 61577-2:2014, MODIFIED)
12/30257420 DC : 0	BS EN 61851-23 ED 1.0 - ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - PART 23: D.C. ELECTRIC VEHICLE CHARGING STATION
EN 60670-1:2005/A1:2013	BOXES AND ENCLOSURES FOR ELECTRICAL ACCESSORIES FOR HOUSEHOLD AND SIMILAR FIXED ELECTRICAL INSTALLATIONS - PART 1: GENERAL REQUIREMENTS (IEC 60670-1:2002/A1:2011, MODIFIED)
I.S. EN 60974-4:2016	ARC WELDING EQUIPMENT - PART 4: PERIODIC INSPECTION AND TESTING
S.R. HD 60364-7-705:2007	LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-705: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - AGRICULTURAL AND HORTICULTURAL PREMISES
BIS IS 15382-1 : 2014	INSULATION COORDINATION FOR EQUIPMENT WITHIN LOW-VOLTAGE SYSTEMS - PART 1: PRINCIPLES, REQUIREMENTS AND TESTS
BS EN 61851-23 : 2014	ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - PART 23: DC ELECTRIC VEHICLE CHARGING STATION (IEC 61851-23:2014)
13/30294866 DC : 0	BS EN 61058-1 - SWITCHES FOR APPLIANCES - PART 1: GENERAL REQUIREMENTS
I.S. EN 61810-1:2015	ELECTROMECHANICAL ELEMENTARY RELAYS - PART 1: GENERAL AND SAFETY REQUIREMENTS
NF EN 60670-1 : 2005 AMD 1 2013	BOXES AND ENCLOSURES FOR ELECTRICAL ACCESSORIES FOR HOUSEHOLD AND SIMILAR FIXED ELECTRICAL INSTALLATIONS - PART 1: GENERAL REQUIREMENTS
S.R. CLC/TS 62603-1:2014	INDUSTRIAL PROCESS CONTROL SYSTEMS - GUIDELINE FOR EVALUATING PROCESS CONTROL SYSTEMS - PART 1: SPECIFICATIONS
09/30186728 DC : 0	BS EN 62040-3 - UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 3: METHOD OF SPECIFYING THE PERFORMANCE AND TEST REQUIREMENTS
NF EN 60947-5-1 : 2004 AMD 1 2009	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-1: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - ELECTROMECHANICAL CONTROL CIRCUIT DEVICES
EN 16282-7:2017	EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 7: INSTALLATION AND USE OF FIXED FIRE SUPPRESSION SYSTEMS
I.S. EN 50274:2002	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PROTECTION AGAINST ELECTRIC SHOCK - PROTECTION AGAINST UNINTENTIONAL DIRECT CONTACT WITH HAZARDOUS LIVE PARTS
BS EN 61822 : 2009	ELECTRICAL INSTALLATIONS FOR LIGHTING AND BEACONING OF AERODROMES - CONSTANT CURRENT REGULATORS
CSA E60384.14 : 2014	FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 14: SECTIONAL SPECIFICATION - FIXED CAPACITORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION AND CONNECTION TO THE SUPPLY MAINS
BS EN 61439-2:2011 (published 2011-12)	Low-voltage switchgear and controlgear assemblies Power switchgear and controlgear assemblies
CEI EN 60947-5-3 : 2014	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-3: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - REQUIREMENTS FOR PROXIMITY DEVICES WITH DEFINED BEHAVIOUR UNDER FAULT CONDITIONS (PDDB)
BS EN 61058-1 : 2002	SWITCHES FOR APPLIANCES - PART 1: GENERAL REQUIREMENTS
BS 7909:2011	Code of practice for temporary electrical systems for entertainment and related purposes
CEI EN 61577-2 : 1ED 2018	RADIATION PROTECTION INSTRUMENTATION - RADON AND RADON DECAY PRODUCT MEASURING INSTRUMENTS - PART 2: SPECIFIC REQUIREMENTS FOR [222]RN AND [220]RN MEASURING INSTRUMENTS
BS EN 62368-1 : 2014	AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS
BS IEC 61577-2 : 2014	RADIATION PROTECTION INSTRUMENTATION - RADON AND RADON DECAY PRODUCT MEASURING INSTRUMENTS - PART 2: SPECIFIC REQUIREMENTS FOR [222]RN AND [220]RN MEASURING INSTRUMENTS
CEI EN 60092-507 : 2016	ELECTRICAL INSTALLATIONS IN SHIPS - PART 507: SMALL VESSELS
BS IEC 62790 : 2014	JUNCTION BOXES FOR PHOTOVOLTAIC MODULES - SAFETY REQUIREMENTS AND TESTS
DD ENV 13154-2 : 1998	DATA COMMUNICATION FOR HVAC APPLICATION FIELD NET - PROTOCOLS
EN IEC 61730-1:2018/AC:2018-06	PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 1: REQUIREMENTS FOR CONSTRUCTION (IEC 61730-1:2016)
PD IEC/TR 61340-5-2:2018	Electrostatics Protection of electronic devices from electrostatic phenomena. User guide
PREN 285 : DRAFT 2013	STERILIZATION - STEAM STERILIZERS - LARGE STERILIZERS
BS EN 60077-2:2017	Railway applications. Electric equipment for rolling stock Electrotechnical components. General rules
DD CLC/TS 45545-5 : 2009	RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 5: FIRE SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT INCLUDING THAT OF TROLLEY BUSES, TRACK GUIDED BUSES AND MAGNETIC LEVITATION VEHICLES
BS EN 60092-507 : 2015	ELECTRICAL INSTALLATIONS IN SHIPS - PART 507: SMALL VESSELS
HD 60364-4-41:2017/A11:2017	LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 4-41: PROTECTION FOR SAFETY - PROTECTION AGAINST ELECTRIC SHOCK
EN IEC 61730-2:2018/AC:2018-06	PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 2: REQUIREMENTS FOR TESTING (IEC 61730-2:2016)
BS EN 62353 : 2014	MEDICAL ELECTRICAL EQUIPMENT - RECURRENT TEST AND TEST AFTER REPAIR OF MEDICAL ELECTRICAL EQUIPMENT
I.S. EN 60670-1:2005	BOXES AND ENCLOSURES FOR ELECTRICAL ACCESSORIES FOR HOUSEHOLD AND SIMILAR FIXED ELECTRICAL INSTALLATIONS - PART 1: GENERAL REQUIREMENTS (IEC 60670-1:2002 (MOD) + CORRIGENDUM FEB. 2003 (EQV))
08/30184169 DC : DRAFT JUNE 2008	BS EN 61243-3 - LIVE WORKING - VOLTAGE DETECTORS - PART 3: TWO-POLE LOW-VOLTAGE TYPE
I.S. EN 55014-1:2017	ELECTROMAGNETIC COMPATIBILITY - REQUIREMENTS FOR HOUSEHOLD APPLIANCES, ELECTRIC TOOLS AND SIMILAR APPARATUS - PART 1: EMISSION
EN 61439-1:2011	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1: GENERAL RULES (IEC 61439-1:2011)
UNE-EN 50467:2012	Railway applications - Rolling stock - Electrical connectors, requirements and test methods
I.S. EN 55016-2-3:2017	SPECIFICATION FOR RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS AND METHODS - PART 2-3: METHODS OF MEASUREMENT OF DISTURBANCES AND IMMUNITY - RADIATED DISTURBANCE MEASUREMENTS
IEC TR 61340-5-2:2007	Electrostatics - Part 5-2: Protection of electronic devices from electrostatic phenomena - User guide
CSA ISO/IEC 15018 : 2005 : R2010	INFORMATION TECHNOLOGY - GENERIC CABLING FOR HOMES
IEC TR 61340-5-2:2018 RLV	Electrostatics - Part 5-2: Protection of electronic devices from electrostatic phenomena - User guide
IEC 62026-2:2008	Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 2: Actuator sensor interface (AS-i)
CSA ISO/IEC 15018:2005	INFORMATION TECHNOLOGY - GENERIC CABLING FOR HOMES
IEC 60974-1:2017	Arc welding equipment - Part 1: Welding power sources
ISO/TS 22559-2:2010	Safety requirements for lifts (elevators) Part 2: Safety parameters meeting the global essential safety requirements (GESRs)
EN 55016-2-3:2017	SPECIFICATION FOR RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS AND METHODS - PART 2-3: METHODS OF MEASUREMENT OF DISTURBANCES AND IMMUNITY - RADIATED DISTURBANCE MEASUREMENTS
CSA ISO/IEC 15018 : 2005 : INC : AMD 1 : 2010 : R201000	INFORMATION TECHNOLOGY - GENERIC CABLING FOR HOMES
BS EN 60728-11:2017 (published 2017-07)	Cable networks for television signals, sound signals and interactive services Safety
CEI EN 61995-1 : 2009	DEVICES FOR THE CONNECTION OF LUMINAIRES FOR HOUSEHOLD AND SIMILAR PURPOSES - PART 1: GENERAL REQUIREMENTS
S.R. HD 60364-5-51:2009	ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 5-51: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - COMMON RULES
I.S. EN 62683-1:2017	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PRODUCT DATA AND PROPERTIES FOR INFORMATION EXCHANGE - PART 1: CATALOGUE DATA
I.S. EN 60445:2017	BASIC AND SAFETY PRINCIPLES FOR MAN-MACHINE INTERFACE, MARKING AND IDENTIFICATION - IDENTIFICATION OF EQUIPMENT TERMINALS, CONDUCTOR TERMINATIONS AND CONDUCTORS
ISO 14990-1:2016	Earth-moving machinery Electrical safety of machines utilizing electric drives and related components and systems Part 1: General requirements
CEI EN 61095 : 2010	ELECTROMECHANICAL CONTACTORS FOR HOUSEHOLD AND SIMILAR PURPOSES
I.S. HD 60364-7-702:2010	LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-702: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - SWIMMING POOLS AND FOUNTAINS
I.S. EN 61058-1:2002	SWITCHES FOR APPLIANCES - PART 1: GENERAL REQUIREMENTS
I.S. EN 60939-3:2015	PASSIVE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION - PART 3: PASSIVE FILTER UNITS FOR WHICH SAFETY TESTS ARE APPROPRIATE
EN 62683-1 : 2017	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PRODUCT DATA AND PROPERTIES FOR INFORMATION EXCHANGE - PART 1: CATALOGUE DATA (IEC 62683-1:2017)
IEC 61730-2 REDLINE : 2ED 2016	PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 2: REQUIREMENTS FOR TESTING
I.S. EN 61010-2-201:2013	SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - PART 2-201: PARTICULAR REQUIREMENTS FOR CONTROL EQUIPMENT (IEC 61010-2-201:2013 (EQV))
I.S. EN IEC 63044-3:2018	HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) - PART 3: ELECTRICAL SAFETY REQUIREMENTS
BS EN 61730-1 : 2007	PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 1: REQUIREMENTS FOR CONSTRUCTION
I.S. EN 61439-2:2011	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 2: POWER SWITCHGEAR AND CONTROLGEAR ASSEMBLIES (IEC 61439-2:2011)
IEC 60445:2017	Basic and safety principles for man-machine interface, marking and identification - Identification of equipment terminals, conductor terminations and conductors
BS EN 50153 : 2014	RAILWAY APPLICATIONS - ROLLING STOCK - PROTECTIVE PROVISIONS RELATING TO ELECTRICAL HAZARDS
I.S. EN 50467:2011	RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS
BS EN 50548 : 2011	JUNCTION BOXES FOR PHOTOVOLTAIC MODULES
BS EN 60947-2:2017	Low-voltage switchgear and controlgear Circuit-breakers
BS EN 50174-3 : 2013	INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 3: INSTALLATION PLANNING AND PRACTICES OUTSIDE BUILDINGS
CSA C22.2 No. 60079-18 : 2016	EXPLOSIVE ATMOSPHERES - PART 18: EQUIPMENT PROTECTION BY ENCAPSULATION 'M'
I.S. EN 61851-1:2011	ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - PART 1: GENERAL REQUIREMENTS
I.S. EN IEC 61730-1:2018	PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 1: REQUIREMENTS FOR CONSTRUCTION
IEC 60364-7-722:2015	Low-voltage electrical installations - Part 7-722: Requirements for special installations or locations - Supplies for electric vehicles
NF EN 50556 : 2011	ROAD TRAFFIC SIGNAL SYSTEMS
BS EN 62683:2015	Low-voltage switchgear and controlgear. Product data and properties for information exchange
CSA C22.2 No. 61058.1 : 2009 : R2014	SWITCHES FOR APPLIANCES - PART 1: GENERAL REQUIREMENTS
IEC 60990 REDLINE : 3ED 2016	METHODS OF MEASUREMENT OF TOUCH CURRENT AND PROTECTIVE CONDUCTOR CURRENT
UNE-IEC 60050-851:2010	International Electrotechnical Vocabulary (IEV) - Part 851: Electric welding
CSA C22.2 No. 61980-1 : 2016	ELECTRIC VEHICLE WIRELESS POWER TRANSFER (WPT) SYSTEMS - PART 1: GENERAL REQUIREMENTS
CSA C22.2 No. 61730-1 : 2011 : INC : AMD 1 : 2013	PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 1: REQUIREMENTS FOR CONSTRUCTION
I.S. HD 60364-7-705:2007	LOW-VOLTAGE ELECTRICAL INSTALLATIONS - - PART 7-705: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - AGRICULTURAL AND HORTICULTURAL PREMISES (IEC 60364-7-705:2006 (MOD))
IEC 60077-2 REDLINE : 2ED 2017	RAILWAY APPLICATIONS - ELECTRIC EQUIPMENT FOR ROLLING STOCK - PART 2: ELECTROTECHNICAL COMPONENTS - GENERAL RULES
IEC 61730-1:2016	Photovoltaic (PV) module safety qualification - Part 1: Requirements for construction
IEC 60050-581:2008	International Electrotechnical Vocabulary (IEV) - Part 581: Electromechanical components for electronic equipment
AAMI ES60601-1 : 2005 : INC : AMD 1 : 2012 : R201200	MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD)
IEC 60417-1:2002	Graphical symbols for use on equipment - Part 1: Overview and application
AAMI ES60601-1 : 2005 : INC : AMD 2 : 2012 : R201200	MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD)
BS EN 62026-2:2013	Low-voltage switchgear and controlgear. Controller-device interfaces (CDIs) Actuator sensor interface (AS-i)
AAMI ES60601-1 : 2005 : R2012	MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD)
EN 285:2015	Sterilization - Steam sterilizers - Large sterilizers
CSA C22.2 No. 62368-1 : 2014	AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS
DIN EN 12953-9:2007-09	Shell boilers - Part 9: Requirements for limiting devices of the boiler and accessories
BS EN 60519-1:2015	Safety in installations for electroheating and electromagnetic processing General requirements
08/30177777 DC : DRAFT FEB 2008	BS EN 62548 - INSTALLATION AND SAFETY REQUIREMENTS FOR PHOTOVOLTAIC (PV) GENERATORS
15/30319022 DC : 0	BS EN 60990 ED 3.0 - METHODS OF MEASUREMENT OF TOUCH CURRENT AND PROTECTIVE CONDUCTOR CURRENT
BS EN 61558-1 : 2005	SAFETY OF POWER TRANSFORMERS, POWER SUPPLIES, REACTORS AND SIMILAR PRODUCTS - PART 1: GENERAL REQUIREMENTS AND TESTS
BS EN 50272-3 : 2002	SAFETY REQUIREMENTS FOR SECONDARY BATTERIES AND BATTERY INSTALLATIONS - PART 3: TRACTION BATTERIES
10/30218813 DC : 0	BS EN 61439-4 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 4: ASSEMBLIES FOR CONSTRUCTION SITES (ACS)
16/30330036 DC : 0	BS EN 62788-2 - MEASUREMENT PROCEDURES FOR MATERIALS USED IN PHOTOVOLTAIC MODULES - PART 2: POLYMERIC MATERIALS USED FOR FRONTSHEETS AND BACKSHEETS
BS EN 61010-2-201 : 2013	SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 2-201: PARTICULAR REQUIREMENTS FOR CONTROL EQUIPMENT
UNE-EN ISO 11252:2013	Lasers and laser-related equipment - Laser device - Minimum requirements for documentation (ISO 11252:2013)
17/30346770 DC : 0	BS EN 60974-9 - ARC WELDING EQUIPMENT - PART 9: INSTALLATION AND USE
PD IEC/TS 63053:2017	General requirements for residual current operated protective devices for DC systems
BS EN 50174-2 : 2009	INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 2: INSTALLATION PLANNING AND PRACTICES INSIDE BUILDINGS
IEC 61969-1:2011	Mechanical structures for electronic equipment - Outdoor enclosures - Part 1: Design guidelines
BS EN 61557-8:2015	Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. Equipment for testing, measuring or monitoring of protective measures Insulation monitoring devices for IT systems
BS IEC 62852 : 2014	CONNECTORS FOR DC-APPLICATION IN PHOTOVOLTAIC SYSTEMS - SAFETY REQUIREMENTS AND TESTS
14/30287195 DC : 0	BS ISO 18246 - ELECTRICALLY PROPELLED MOPEDS AND MOTORCYCLES - SAFETY REQUIREMENTS FOR CONDUCTIVE CONNECTION TO AN EXTERNAL ELECTRIC POWER SUPPLY
05/30060689 DC : DRAFT JUN 2005	IEC 62282-3-1 - FUEL CELL TECHNOLOGIES - PART 3-1: STATIONARY FUEL CELL POWER PLANTS - SAFETY
04/30125208 DC : DRAFT NOV 2004	IEC 61557-8 ED.2 - ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. V D.C. EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 8: INSULATION MONITORING DEVICES FOR IT SYSTEMS
08/30168069 DC : DRAFT MAR 2008	BS EN 60364-7-717 - LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-717: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - MOBILE OR TRANSPORTABLE UNITS
BS PD IEC TS 62996 : 2017	INDUSTRIAL ELECTROHEATING AND ELECTROMAGNETIC PROCESSING EQUIPMENT - REQUIREMENTS ON TOUCH CURRENTS, VOLTAGES AND ELECTRIC FIELDS FROM 1 KHZ TO 6 MHZ
UNE-EN ISO 16230-1:2016	Agricultural machinery and tractors - Safety of higher voltage electrical and electronic components and systems - Part 1: General requirements (ISO 16230-1:2015)
15/30286010 DC : 0	BS ISO 14990-1 - EARTH-MOVING MACHINERY - ELECTRICAL SAFETY OF MACHINES UTILISING ELECTRIC DRIVES AND RELATED COMPONENTS AND SYSTEMS - PART 1: GENERAL REQUIREMENTS
UNE-EN 62870:2016	Electrical installations for lighting and beaconing of aerodromes - Safety secondary circuits in series circuits - General safety requirements
13/30238229 DC : 0	BS EN 62052-31 - ELECTRICITY METERING EQUIPMENT (AC) - GENERAL REQUIREMENTS, TEST AND TEST CONDITIONS - PART 31: PRODUCT SAFETY REQUIREMENTS
BS EN 60079-18 : 2015	EXPLOSIVE ATMOSPHERES - PART 18: EQUIPMENT PROTECTION BY ENCAPSULATION 'M'
08/30195433 DC : 0	BS EN 60519-1 - SAFETY IN ELECTROHEAT INSTALLATIONS - PART 1: GENERAL REQUIREMENTS
16/30350625 DC : 0	BS EN 62485-5 ED 1.0 - SAFETY REQUIREMENTS FOR SECONDARY BATTERIES AND BATTERY INSTALLATIONS - PART 5: LITHIUM-ION BATTERIES FOR STATIONARY APPLICATIONS
BS EN 62477-1 : 2012	SAFETY REQUIREMENTS FOR POWER ELECTRONIC CONVERTER SYSTEMS AND EQUIPMENT - PART 1: GENERAL (IEC 62477-1:2012)
IEC 60947-5-9:2006	Low-voltage switchgear and controlgear - Part 5-9: Control circuit devices and switching elements - Flow rate switches
12/30268015 DC : 0	BS EN 62135-1 - RESISTANCE WELDING EQUIPMENT - PART 1: SAFETY REQUIREMENTS FOR DESIGN, MANUFACTURE AND INSTALLATION
IEC 60990:2016	Methods of measurement of touch current and protective conductor current
14/30244780 DC : 0	BS ISO 19859 - GAS TURBINE APPLICATIONS - REQUIREMENTS FOR POWER GENERATION
15/30286835 DC : 0	BS ISO 14990-2 - EARTH-MOVING MACHINERY - ELECTRICAL SAFETY OF MACHINES UTILISING ELECTRIC DRIVES AND RELATED COMPONENTS AND SYSTEMS - PART 2: PARTICULAR REQUIREMENTS FOR EXTERNALLY-POWERED MACHINES
BS EN 62040-1-2 : 2003
EN 61800-5-1:2007/A1:2017	ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 5-1: SAFETY REQUIREMENTS - ELECTRICAL, THERMAL AND ENERGY (IEC 61800-5-1:2007/A1:2016)
EN 50178:1997	Electronic equipment for use in power installations
EN 62052-31 : 2016	ELECTRICITY METERING EQUIPMENT (AC) - GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - PART 31: PRODUCT SAFETY REQUIREMENTS AND TESTS (IEC 62052-31:2015)
EN 50502:2015	RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRIC EQUIPMENT IN TROLLEY BUSES - SAFETY REQUIREMENTS AND CURRENT COLLECTION SYSTEMS
EN 61243-3:2014/AC:2015	LIVE WORKING - VOLTAGE DETECTORS - PART 3: TWO-POLE LOW-VOLTAGE TYPE
EN 61340-5-1:2016/AC:2017-05	ELECTROSTATICS - PART 5-1: PROTECTION OF ELECTRONIC DEVICES FROM ELECTROSTATIC PHENOMENA - GENERAL REQUIREMENTS (IEC 61340-5-1:2016/COR1:2017)
EN 50274 : 2002 COR 2009	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PROTECTION AGAINST ELECTRIC SHOCK - PROTECTION AGAINST UNINTENTIONAL DIRECT CONTACT WITH HAZARDOUS LIVE PARTS
EN 61058-1:2002/A2:2008	SWITCHES FOR APPLIANCES - PART 1: GENERAL REQUIREMENTS
EN 60974-4:2016	ARC WELDING EQUIPMENT - PART 4: PERIODIC INSPECTION AND TESTING (IEC 60974-4:2016)
EN 50272-3 : 2002 COR 2003	SAFETY REQUIREMENTS FOR SECONDARY BATTERIES AND BATTERY INSTALLATIONS - PART 3: TRACTION BATTERIES
EN 62080:2009/A2:2015	SOUND SIGNALLING DEVICES FOR HOUSEHOLD AND SIMILAR PURPOSES (IEC 62080:2001/A2:2015)
EN 61558-1:2005/A1:2009	SAFETY OF POWER TRANSFORMERS, POWER SUPPLIES, REACTORS AND SIMILAR PRODUCTS - PART 1: GENERAL REQUIREMENTS AND TESTS
HD 60364-5-51:2009/A12:2017	ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 5-51: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - COMMON RULES
EN 60255-27:2014	MEASURING RELAYS AND PROTECTION EQUIPMENT - PART 27: PRODUCT SAFETY REQUIREMENTS (IEC 60255-27:2013)
HD 60364-7-717:2010/AC:2014	LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-717: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - MOBILE OR TRANSPORTABLE UNITS
EN 50191:2010	ERECTION AND OPERATION OF ELECTRICAL TEST EQUIPMENT
HD 384.4.41 S2:1996/A1:2002	ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 4: PROTECTION FOR SAFETY - CHAPTER 41: PROTECTION AGAINST ELECTRIC SHOCK
EN 60730-1:2016	AUTOMATIC ELECTRICAL CONTROLS - PART 1: GENERAL REQUIREMENTS (IEC 60730-1:2013, MODIFIED + COR1:2014)
EN 60990:2016	METHODS OF MEASUREMENT OF TOUCH CURRENT AND PROTECTIVE CONDUCTOR CURRENT (IEC 60990:2016)
EN 60519-1:2015	SAFETY IN INSTALLATIONS FOR ELECTROHEATING AND ELECTROMAGNETIC PROCESSING - PART 1: GENERAL REQUIREMENTS (IEC 60519-1:2015)
EN 60669-2-5 : 2016	SWITCHES FOR HOUSEHOLD AND SIMILAR FIXED ELECTRICAL INSTALLATIONS - PART 2-5: PARTICULAR REQUIREMENTS - SWITCHES AND RELATED ACCESSORIES FOR USE IN HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) (IEC 60669-2-5:2013, MODIFIED)
EN 12952-11 : 2007	WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 11: REQUIREMENTS FOR LIMITING DEVICES OF THE BOILER AND ACCESSORIES
EN 61131-2:2007	PROGRAMMABLE CONTROLLERS - PART 2: EQUIPMENT REQUIREMENTS AND TESTS
EN 61851-1:2011	Electric vehicle conductive charging system - Part 1: General requirements
EN 60669-2-3:2006	SWITCHES FOR HOUSEHOLD AND SIMILAR FIXED ELECTRICAL INSTALLATIONS - PART 2-3: PARTICULAR REQUIREMENTS - TIME DELAY SWITCHES (TDS)
EN IEC 62485-2 : 2018	SAFETY REQUIREMENTS FOR SECONDARY BATTERIES AND BATTERY INSTALLATIONS - PART 2: STATIONARY BATTERIES (IEC 62485-2:2010)
EN 61822:2009	ELECTRICAL INSTALLATIONS FOR LIGHTING AND BEACONING OF AERODROMES - CONSTANT CURRENT REGULATORS
EN 61730-2:2007/A1:2012	PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 2: REQUIREMENTS FOR TESTING (IEC 61730-2:2004/A1:2011)
EN 50428 : 2005 AMD 2 2009	SWITCHES FOR HOUSEHOLD AND SIMILAR FIXED ELECTRICAL INSTALLATIONS - COLLATERAL STANDARD - SWITCHES AND RELATED ACCESSORIES FOR USE IN HOME AND BUILDING ELECTRONIC SYSTEMS (HBES)
EN 62683:2015	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PRODUCT DATA AND PROPERTIES FOR INFORMATION EXCHANGE (IEC 62683:2015)
EN 62718 : 2016	RAILWAY APPLICATIONS - ROLLING STOCK - DC SUPPLIED ELECTRONIC BALLASTS FOR LIGHTING FLUORESCENT LAMPS (IEC 62718:2013 + COR1:2016)
EN 62040-1-2:2003/corrigendum:2004
HD 60364-7-702 : 2010	LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-702: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - SWIMMING POOLS AND FOUNTAINS
EN 60950-1:2006/A2:2013	INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60950-1:2005/A2:2013, MODIFIED)
EN 60439-4:2004	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 4: PARTICULAR REQUIREMENTS FOR ASSEMBLIES FOR CONSTRUCTION SITES (ACS)
EN ISO 12696:2016 (edition 2)	Cathodic protection of steel in concrete (ISO 12696:2016)
EN 62353:2014	MEDICAL ELECTRICAL EQUIPMENT - RECURRENT TEST AND TEST AFTER REPAIR OF MEDICAL ELECTRICAL EQUIPMENT (IEC 62353:2014)
HD 60364-5-54:2011/A11:2017	LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-54: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - EARTHING ARRANGEMENTS AND PROTECTIVE CONDUCTORS
CLC/TS 45545-5:2009	RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 5: FIRE SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT INCLUDING THAT OF TROLLEY BUSES, TRACK GUIDED BUSES AND MAGNETIC LEVITATION VEHICLES
EN 60974-5:2013	ARC WELDING EQUIPMENT - PART 5: WIRE FEEDERS (IEC 60974-5:2013)
HD 60364-5-559:2012/A11:2017	LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-559: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - LUMINAIRES AND LIGHTING INSTALLATIONS
EN 50548 : 2011 AMD 2 2014	JUNCTION BOXES FOR PHOTOVOLTAIC MODULES
12/30268003 DC : 0	BS EN 60939-3 - PASSIVE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION - PART 3: HARMONIZED STANDARD FOR PASSIVE FILTER UNITS FOR WHICH SAFETY TESTS ARE APPROPRIATE
DIN ISO 29262:2013-03	Production equipment for microsystems - Interface between end effector and handling system (ISO 29262:2011)
03/318812 DC : DRAFT NOV 2003	IEC 62257-3 TS ED.1 - RECOMMENDATIONS FOR SMALL RENEWABLE ENERGY AND HYBRID SYSTEMS FOR RURAL ELECTRIFICATION - PART 3: PROJECT DEVELOPMENT AND MANAGEMENT
06/30157062 DC : 0	BS EN 62310-3 - STATIC TRANSFER SYSTEMS (STS) - PART 3: METHOD OF SPECIFYING THE PERFORMANCE AND TEST REQUIREMENTS
BS EN 16299 : 2013	CATHODIC PROTECTION OF EXTERNAL SURFACES OF ABOVE GROUND STORAGE TANK BASES IN CONTACT WITH SOIL OR FOUNDATIONS
I.S. EN 61969-3:2012	MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT - OUTDOOR ENCLOSURES - PART 3: ENVIRONMENTAL REQUIREMENTS, TESTS AND SAFETY ASPECTS (IEC 61969-3:2011 (EQV))
UNE-EN 62504:2015	General lighting - Light emitting diode (LED) products and related equipment - Terms and definitions
BS EN 62282-5-1:2012 (published 2013-01)	Fuel cell technologies Portable fuel cell power systems. Safety
I.S. EN 60974-5:2013	ARC WELDING EQUIPMENT - PART 5: WIRE FEEDERS (IEC 60974-5:2013 (EQV))
17/30358367 DC : 0	BS EN 17128 - NON-APPROVED LIGHT MOTORIZED VEHICLES FOR THE TRANSPORTATION OF PERSONS AND GOODS AND RELATED FACILITIES - PERSONAL LIGHT ELECTRIC VEHICLES (PLEV) - SAFETY REQUIREMENTS AND TEST METHODS
BS PD IEC TR 60664-2-1 : 2011	INSULATION COORDINATION FOR EQUIPMENT WITHIN LOW-VOLTAGE SYSTEMS - PART 2-1: APPLICATION GUIDE - EXPLANATION OF THE APPLICATION OF THE IEC 60664 SERIES, DIMENSIONING EXAMPLES AND DIELECTRIC TESTING
IEC TS 62997:2017	Industrial electroheating and electromagnetic processing equipment - Evaluation of hazards caused by magnetic nearfields from 1 Hz to 6 MHz
BS EN 60669-2-3:2006	Switches for household and similar fixed electrical installations Particular requirements. Time delay switches (TDS)
I.S. EN 62790:2015	JUNCTION BOXES FOR PHOTOVOLTAIC MODULES - SAFETY REQUIREMENTS AND TESTS
BS EN 60445:2017	Basic and safety principles for man-machine interface, marking and identification. Identification of equipment terminals, conductor terminations and conductors
BS ISO 29262 : 2011	PRODUCTION EQUIPMENT FOR MICROSYSTEMS - INTERFACE BETWEEN END EFFECTOR AND HANDLING SYSTEM
BS EN 61095:1993	ELECTROMECHANICAL CONTACTORS FOR HOUSEHOLD AND SIMILAR PURPOSES
BS EN 62718 : 2016	RAILWAY APPLICATIONS - ROLLING STOCK - DC SUPPLIED ELECTRONIC BALLASTS FOR LIGHTING FLUORESCENT LAMPS (IEC 62718:2013 + COR1:2016)
14/30298271 DC : 0	BS EN 60364-7-722 ED 1.0 - LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-722: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - SUPPLY OF ELECTRIC VEHICLES
16/30342256 DC : 0	BS EN 50107-3 - PRODUCT STANDARD COVERING LUMINOUS SIGNS WITH DISCHARGE LAMPS AND/OR LED (LIGHT EMITTING DIODES) AND/OR EL (ELECTROLUMINESCENT) LIGHTSOURCES WITH A NOMINAL VOLTAGE NOT EXCEEDING 1000 V, WITH THE EXCLUSION OF GENERAL LIGHTING, TRAFFIC- OR EMERGENCY RELATED PURPOSE
EN 60077-2:2017	RAILWAY APPLICATIONS - ELECTRIC EQUIPMENT FOR ROLLING STOCK - PART 2: ELECTROTECHNICAL COMPONENTS - GENERAL RULES (IEC 60077-2:2017)
CEI EN 60939-2 : 2005	PASSIVE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION - PART 2: SECTIONAL SPECIFICATION: PASSIVE FILTER UNITS FOR WHICH SAFETY TESTS ARE APPROPRIATE - TEST METHODS AND GENERAL REQUIREMENTS
BS PD CLC/TS 62603-1 : 2014	INDUSTRIAL PROCESS CONTROL SYSTEMS - GUIDELINES FOR EVALUATING PROCESS CONTROL SYSTEMS - PART 1: SPECIFICATIONS
I.S. EN 61730-1:2007	PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 1: REQUIREMENTS FOR CONSTRUCTION
CEI EN 60669-2-3 : 2007	SWITCHES FOR HOUSEHOLD AND SIMILAR FIXED ELECTRICAL INSTALLATIONS - PART 2-3: PARTICULAR REQUIREMENTS - TIME DELAY SWITCHES (TDS)
NF EN 50521 : 2009 AMD 1 2012	CONNECTORS FOR PHOTOVOLTAIC SYSTEMS - SAFETY REQUIREMENTS AND TESTS
BS EN 60974-1 : 2012	ARC WELDING EQUIPMENT - PART 1: WELDING POWER SOURCES
BS EN 60974-3:2014	Arc welding equipment Arc striking and stabilizing devices
BS EN 50502 : 2015	RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRIC EQUIPMENT IN TROLLEY BUSES - SAFETY REQUIREMENTS AND CURRENT COLLECTION SYSTEMS
NF EN 50090-9-1 : 2004	HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) - PART 9-1: INSTALLATION REQUIREMENTS - GENERIC CABLING FOR HBES CLASS 1 TWISTED PAIR
11/30250287 DC : 0	BS EN 60255-27 - MEASURING RELAYS AND PROTECTION EQUIPMENT - PART 27: PRODUCT SAFETY REQUIREMENTS
BS EN 61969-1 : 2012	MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT - OUTDOOR ENCLOSURES - PART 1: DESIGN GUIDELINES
BS EN 60664-1:2007	Insulation coordination for equipment within low-voltage systems Principles, requirements and tests
10/30203578 DC : 0	BS EN 61577-3 - RADIATION PROTECTION INSTRUMENTATION - RADON AND RADON DECAY PRODUCT MEASURING INSTRUMENTS - PART 3: SPECIFIC REQUIREMENTS ON RADON DECAY PRODUCT MEASURING INSTRUMENTS
BS EN 16282-8:2017	Equipment for commercial kitchens. Components for ventilation in commercial kitchens Installations for treatment of aerosol. Requirements and testing
NF ENV 13154-2 : 98 XP	DATA COMMUNICATION FOR HVAC APPLICATION FIELD NET - PART 2: PROTOCOLS
10/30219049 DC : 0	BS EN 62638 - RECURRENT TEST AND TEST AFTER REPAIR AND MODIFICATION OF ELECTRICAL EQUIPMENT
I.S. EN 61851-23:2014	ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - PART 23: DC ELECTRIC VEHICLE CHARGING STATION
CEI EN 50467 : 2013	RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS
S.R. HD 60364-4-41:2017	LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 4-41: PROTECTION FOR SAFETY - PROTECTION AGAINST ELECTRIC SHOCK
DD IEC TS 62257-5 : DRAFT 2005	RECOMMENDATIONS FOR SMALL RENEWABLE ENERGY AND HYBRID SYSTEMS FOR RURAL ELECTRIFICATION - PART 5: PROTECTION AGAINST ELECTRICAL HAZARDS
18/30368743 DC (published 2018-04)	BS EN 60947-6-2. Low-voltage switchgear and controlgear Part 6-2. Multiple function equipment. Control and protective switching devices (or equipment) (CPS)
CEI EN 60664-1 : 2008	INSULATION COORDINATION FOR EQUIPMENT WITHIN LOW-VOLTAGE SYSTEMS - PART 1: PRINCIPLES, REQUIREMENTS AND TESTS
IEC 62368-1:2014	Audio/video, information and communication technology equipment - Part 1: Safety requirements
I.S. EN 62852:2015	CONNECTORS FOR DC-APPLICATION IN PHOTOVOLTAIC SYSTEMS - SAFETY REQUIREMENTS AND TESTS
BS EN IEC 63044-3:2018	Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) Electrical safety requirements
BS EN 50065-4-7:2005 (published 2008-01)	Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz and 1,6 MHz to 30 MHz Portable low voltage decoupling filters. Safety requirements
17/30347375 DC : 0	BS EN 62368-1 ED 3.0 - AUDIO/VIDEO; INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS
CEI EN 60669-2-2 : 2007	SWITCHES FOR HOUSEHOLD AND SIMILAR FIXED ELECTRICAL INSTALLATIONS - PART 2-2: PARTICULAR REQUIREMENTS - ELECTROMAGNETIC REMOTECONTROL SWITCHES (RCS)
EN 60947-5-1:2017	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-1: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - ELECTROMECHANICAL CONTROL CIRCUIT DEVICES (IEC 60947-5-1:2016 + COR1:2016)
I.S. EN 50491-3:2009	GENERAL REQUIREMENTS FOR HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) - PART 3: ELECTRICAL SAFETY REQUIREMENTS
I.S. EN ISO 16230-1:2015	AGRICULTURAL MACHINERY AND TRACTORS - SAFETY OF HIGHER VOLTAGE ELECTRICAL AND ELECTRONIC COMPONENTS AND SYSTEMS - PART 1: GENERAL REQUIREMENTS (ISO 16230-1:2015)
I.S. EN 60728-11:2017	CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 11: SAFETY
I.S. EN 60255-27:2014	MEASURING RELAYS AND PROTECTION EQUIPMENT - PART 27: PRODUCT SAFETY REQUIREMENTS
BS IEC 61577-3 : 2011	RADIATION PROTECTION INSTRUMENTATION - RADON AND RADON DECAY PRODUCT MEASURING INSTRUMENTS - PART 3: SPECIFIC REQUIREMENTS FOR RADON DECAY PRODUCT MEASURING INSTRUMENTS
IEC TR 60664-2-1:2011	Insulation coordination for equipment within low-voltage systems - Part 2-1: Application guide - Explanation of the application of the IEC 60664 series, dimensioning examples and dielectric testing
IEC 60077-1 REDLINE : 2ED 2017	RAILWAY APPLICATIONS - ELECTRIC EQUIPMENT FOR ROLLING STOCK - PART 1: GENERAL SERVICE CONDITIONS AND GENERAL RULES
UNE-EN 61557-12:2010	Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures -- Part 12: Performance measuring and monitoring devices (PMD)
I.S. EN 62485-3:2014	SAFETY REQUIREMENTS FOR SECONDARY BATTERIES AND BATTERY INSTALLATIONS - PART 3: TRACTION BATTERIES
CAN/CSA-C22.2 NO. 60947-1-13 (R2018)	Low-voltage switchgear and controlgear - Part 1: General rules (Tri-national standard, with UL 60947-1 and NMX-J-515-ANCE)
IEC 62683-1:2017	Low-voltage switchgear and controlgear - Product data and properties for information exchange - Part 1: Catalogue data
EN 50174-2 : 2009 AMD 2 2014	INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 2: INSTALLATION PLANNING AND PRACTICES INSIDE BUILDINGS
BS EN 61810-1:2015	ELECTROMECHANICAL ELEMENTARY RELAYS - PART 1: GENERAL AND SAFETY REQUIREMENTS
CSA E61558.1:2012	SAFETY OF POWER TRANSFORMERS, POWER SUPPLIES, REACTORS AND SIMILAR PRODUCTS - PART 1: GENERAL REQUIREMENTS AND TESTS
NF EN 61558-1 : 2006 AMD 1 2009	SAFETY OF POWER TRANSFORMERS, POWER SUPPLIES, REACTORS AND SIMILAR PRODUCTS - PART 1: GENERAL REQUIREMENTS AND TESTS
CAN/CSA-E61558-1:12 (R2017)	Safety of power transformers, power supplies, reactors and similar products - Part 1: General requirements and tests (Adopted IEC 61558- 1:1997 + A1:1998, edition 2.1, 2009-04 with Canadian deviations) \| Sécurité des transformateurs, alimentations, bobines d\'inductance et produits analogues - Partie 1: Exigences générales et essais (norme CEI 61558-1:1997 + A1:1998 adoptée, édition 2.1, 2009-04 avec exigences propres au Canada)
BS EN 62504:2014	General lighting. Light emitting diode (LED) products and related equipment. Terms and definitions
NF EN 60669 2-3 : 2006	SWITCHES FOR HOUSEHOLD AND SIMILAR FIXED ELECTRICAL INSTALLATIONS - PART 2-3: PARTICULAR REQUIREMENTS - TIME-DELAY SWITCHES (TDS)
CISPR 14-1:2016	Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission
EN 50604-1:2016	Secondary lithium batteries for light EV (electric vehicle) applications - Part 1: General safety requirements and test methods
BS EN 61243-3:2014 (published 2015-02)	Live working. Voltage detectors Two-pole low-voltage type
I.S. EN 50122-1:2011	RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRICAL SAFETY, EARTHING AND THE RETURN CIRCUIT - PART 1: PROTECTIVE PROVISIONS AGAINST ELECTRIC SHOCK
IEC 61058-1:2016	Switches for appliances - Part 1: General requirements
I.S. EN 62353:2014	MEDICAL ELECTRICAL EQUIPMENT - RECURRENT TEST AND TEST AFTER REPAIR OF MEDICAL ELECTRICAL EQUIPMENT
CEI UNI EN 45545-5 : 2013	RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 5: FIRE SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT INCLUDING THAT OF TROLLEY BUSES, TRACK GUIDED BUSES AND MAGNETIC LEVITATION VEHICLES
I.S. EN 50156-1:2015	ELECTRICAL EQUIPMENT FOR FURNACES AND ANCILLARY EQUIPMENT - PART 1: REQUIREMENTS FOR APPLICATION DESIGN AND INSTALLATION
I.S. EN 62310-1:2005	STATIC TRANSFER SYSTEMS (STS) - PART 1: GENERAL AND SAFETY REQUIREMENTS
I.S. EN 45545-5:2013	RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 5: FIRE SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT INCLUDING THAT OF TROLLEY BUSES, TRACK GUIDED BUSES AND MAGNETIC LEVITATION VEHICLES
I.S. EN 60384-14:2016	FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 14: SECTIONAL SPECIFICATION - FIXED CAPACITORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION AND CONNECTION TO THE SUPPLY MAINS
BS EN 45545-5 : 2013	RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 5: FIRE SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT INCLUDING THAT OF TROLLEY BUSES, TRACK GUIDED BUSES AND MAGNETIC LEVITATION VEHICLES
I.S. EN 60079-18:2015	EXPLOSIVE ATMOSPHERES - PART 18: EQUIPMENT PROTECTION BY ENCAPSULATION 'M'
IEC 61558-1 REDLINE : 3ED 2017	SAFETY OF TRANSFORMERS, REACTORS, POWER SUPPLY UNITS AND COMBINATIONS THEREOF - PART 1: GENERAL REQUIREMENTS AND TESTS
CEI EN 50174-3 : 2014	INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 3: INSTALLATION PLANNING AND PRACTICES OUTSIDE BUILDINGS
I.S. EN 50548:2011	JUNCTION BOXES FOR PHOTOVOLTAIC MODULES
I.S. EN IEC 62485-2:2018	SAFETY REQUIREMENTS FOR SECONDARY BATTERIES AND BATTERY INSTALLATIONS - PART 2: STATIONARY BATTERIES
I.S. EN 62683:2015	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PRODUCT DATA AND PROPERTIES FOR INFORMATION EXCHANGE
CSA C22.2 No. 61730-1 : 2011 : INC : UPD 1 : 2013	PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 1: REQUIREMENTS FOR CONSTRUCTION
I.S. EN 60947-5-2:2008	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-2: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - PROXIMITY SWITCHES (IEC 60947-5-2:2007 (EQV))
I.S. EN 60974-3:2014	ARC WELDING EQUIPMENT - PART 3: ARC STRIKING AND STABILIZING DEVICES
I.S. EN 62718:2016	RAILWAY APPLICATIONS - ROLLING STOCK - DC SUPPLIED ELECTRONIC BALLASTS FOR LIGHTING FLUORESCENT LAMPS
CSA C22.2 No. 61058.1 : 2009 : INC : UPD 1 : 2013	SWITCHES FOR APPLIANCES - PART 1: GENERAL REQUIREMENTS
IEC 60598-1:2014+AMD1:2017 CSV	Luminaires - Part 1: General requirements and tests
UNE-EN 62080:2010	Sound signalling devices for household and similar purposes
EN 55014-1:2017	ELECTROMAGNETIC COMPATIBILITY - REQUIREMENTS FOR HOUSEHOLD APPLIANCES, ELECTRIC TOOLS AND SIMILAR APPARATUS - PART 1: EMISSION (CISPR 14-1:2016 + COR1:2016)
PREN 61577-2 : DRAFT 2017	RADIATION PROTECTION INSTRUMENTATION - RADON AND RADON DECAY PRODUCT MEASURING INSTRUMENTS - PART 2: SPECIFIC REQUIREMENTS FOR [222]RN AND [220]RN MEASURING INSTRUMENTS (IEC 61577-2:2014, MODIFIED)
I.S. EN 60146-1-1:2010	SEMICONDUCTOR CONVERTERS - GENERAL REQUIREMENTS AND LINE COMMUTATED CONVERTERS - PART 1-1: SPECIFICATION OF BASIC REQUIREMENTS
IEC 60730-1:2013+AMD1:2015 CSV	Automatic electrical controls - Part 1: General requirements
I.S. EN 60204-32:2008	SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 32: REQUIREMENTS FOR HOISTING MACHINES
EN 50310:2016	TELECOMMUNICATIONS BONDING NETWORKS FOR BUILDINGS AND OTHER STRUCTURES
IEC 60364-7-705:2006	Low-voltage electrical installations - Part 7-705: Requirements for special installations or locations - Agricultural and horticultural premises
I.S. EN 62040-1-2:2004
IEC 61340-5-1 REDLINE : 2ED 2016	ELECTROSTATICS - PART 5-1: PROTECTION OF ELECTRONIC DEVICES FROM ELECTROSTATIC PHENOMENA - GENERAL REQUIREMENTS
I.S. EN 61340-5-1:2016	ELECTROSTATICS - PART 5-1: PROTECTION OF ELECTRONIC DEVICES FROM ELECTROSTATIC PHENOMENA - GENERAL REQUIREMENTS
I.S. EN 61800-5-1:2007	ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 5-1: SAFETY REQUIREMENTS - ELECTRICAL, THERMAL AND ENERGY
IEC 61851-1:2017	Electric vehicle conductive charging system - Part 1: General requirements
ISO/TR 18569:2004	Safety of machinery Guidelines for the understanding and use of safety of machinery standards
AAMI ES60601-1 : 2005	MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD)
IEC 60204-33:2009	Safety of machinery - Electrical equipment of machines - Part 33: Requirements for semiconductor fabrication equipment
NF EN 62026-2 : 2013	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - CONTROLLER-DEVICE INTERFACES (CDIS) - PART 2: ACTUATOR SENSOR INTERFACE (AS-I)
CSA C22.2 No. 60320-1 : 2011 : R2016	APPLIANCE COUPLERS FOR HOUSEHOLD AND SIMILAR GENERAL PURPOSES - PART 1: GENERAL REQUIREMENTS
BS EN ISO 18246 : 2017	ELECTRICALLY PROPELLED MOPEDS AND MOTORCYCLES - SAFETY REQUIREMENTS FOR CONDUCTIVE CONNECTION TO AN EXTERNAL ELECTRIC POWER SUPPLY (ISO 18246:2015)
IEC 60669-2-2:2006	Switches for household and similar fixed electrical installations - Part 2-2: Particular requirements - Electromagnetic remote-control switches (RCS)
14/30282403 DC : 0	BS ISO/IEC 30129 - APPLICATION OF EQUIPOTENTIAL BONDING AND EARTHING IN BUILDINGS WITH INFORMATION TECHNOLOGY EQUIPMENT
BS EN ISO 16230-1 : 2015	AGRICULTURAL MACHINERY AND TRACTORS - SAFETY OF HIGHER VOLTAGE ELECTRICAL AND ELECTRONIC COMPONENTS AND SYSTEMS - PART 1: GENERAL REQUIREMENTS
17/30370043 DC : 0	BS IEC 62026-2 AMD.1 ED.2.0 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - CONTROLLER-DEVICE INTERFACES (CDIS) - PART 2: ACTUATOR SENSOR INTERFACE (AS-I).
UNE-EN 55014-1:2017	Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission
15/30286839 DC : 0	BS ISO 14990-3 - EARTH-MOVING MACHINERY - ELECTRICAL SAFETY OF MACHINES UTILISING ELECTRIC DRIVES AND RELATED COMPONENTS AND SYSTEMS - PART 3: PARTICULAR REQUIREMENTS FOR SELF-POWERED MACHINES
IEC 62353:2014	Medical electrical equipment - Recurrent test and test after repair of medical electrical equipment
BS EN 61131-2 : 2007	PROGRAMMABLE CONTROLLERS - PART 2: EQUIPMENT REQUIREMENTS AND TESTS
ISO 19859:2016	Gas turbine applications Requirements for power generation
BS EN 62485-3 : 2014	SAFETY REQUIREMENTS FOR SECONDARY BATTERIES AND BATTERY INSTALLATIONS - PART 3: TRACTION BATTERIES
BS EN 60519-2:2006	Safety in electroheat installations Particular requirements for resistance heating equipment
BS EN 746-2 : 2010	INDUSTRIAL THERMOPROCESSING EQUIPMENT - PART 2: SAFETY REQUIREMENTS FOR COMBUSTION AND FUEL HANDLING SYSTEMS
13/30280565 DC : 0	BS EN ISO 16230-1 - AGRICULTURAL MACHINERY AND TRACTORS - SAFETY OF HIGHER VOLTAGE ELECTRICAL AND ELECTRONIC COMPONENTS AND SYSTEMS - PART 1: GENERAL REQUIREMENTS
UNE-EN 50310:2016	Telecommunications bonding networks for buildings and other structures
06/30154990 DC : 0	BS EN 60204-32 - SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 32: REQUIREMENTS FOR HOISTING MACHINES
UNE-EN 61851-1:2012	Electric vehicle conductive charging system - Part 1: General requirements
IEC 60947-2:2016 RLV	Low-voltage switchgear and controlgear - Part 2: Circuit-breakers
I.S. EN 746-2:2010	INDUSTRIAL THERMOPROCESSING EQUIPMENT - PART 2: SAFETY REQUIREMENTS FOR COMBUSTION AND FUEL HANDLING SYSTEMS
I.S. EN ISO 11252:2013	LASERS AND LASER-RELATED EQUIPMENT - LASER DEVICE - MINIMUM REQUIREMENTS FOR DOCUMENTATION (ISO 11252:2013)
EN 60947-1:2007/A2:2014	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES (IEC 60947-1:2007/A2:2014)
DIN EN 13636:2004-10	Cathodic protection of buried metallic tanks and related piping; German version EN 13636:2004
IEC 61058-1:2016 RLV	Switches for appliances - Part 1: General requirements
EN 61557-8:2015/AC:2016-06	Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 8: Insulation monitoring devices for IT systems
IEC 60947-5-1:2016	Low-voltage switchgear and controlgear - Part 5-1: Control circuit devices and switching elements - Electromechanical control circuit devices
BIS IS 13252-1 : 2010 AMD 1 2013	INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
DIN EN 50153 : 2018	RAILWAY APPLICATIONS - ROLLING STOCK - PROTECTIVE PROVISIONS RELATING TO ELECTRICAL HAZARDS
VDE 0129-507 : 2001	ELECTRICAL INSTALLATIONS IN SHIPS - PART 507: PLEASURE CRAFT (IEC 60092-507:2000)
VDE 0115-2 : 2018	RAILWAY APPLICATIONS - ROLLING STOCK - PROTECTIVE PROVISIONS RELATING TO ELECTRICAL HAZARDS
BIS IS 13252 : 2003	INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - GENERAL REQUIREMENTS
IEC 60092-202 REDLINE : 5ED 2016	ELECTRICAL INSTALLATIONS IN SHIPS - PART 202: SYSTEM DESIGN - PROTECTION
CSA C22.2 No. 61730-1 : 2011 : INC : AMD 2 : 2015	PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 1: REQUIREMENTS FOR CONSTRUCTION
I.S. EN 60320-1:2015	Appliance couplers for household and similar general purposes - Part 1: General requirements
08/30181362 DC : DRAFT APR 2008	BS EN 60384-14 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 14: SECTIONAL SPECIFICATION - FIXED CAPACITORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION AND CONNECTION TO THE SUPPLY MAINS
01/206938 DC : DRAFT OCT 2001	IEC 60255-27 ED.1.0 - MEASURING RELAYS AND EQUIPMENT - PART 27: PRODUCT SAFETY REQUIREMENTS FOR MEASURING RELAYS AND PROTECTION EQUIPMENT
BIS IS/IEC 62353 : 2007	MEDICAL ELECTRICAL EQUIPMENT - RECURRENT TEST AND TEST AFTER REPAIR OF MEDICAL ELECTRICAL EQUIPMENT
UNE-EN 50556:2011	Road traffic signal systems
07/30167498 DC : 0	BS EN 61822 - ELECTRICAL INSTALLATIONS FOR LIGHTING AND BEACONING OF AERODROMES - CONSTANT CURRENT REGULATORS
EN 61810-1:2015/AC:2018-04	ELECTROMECHANICAL ELEMENTARY RELAYS - PART 1: GENERAL AND SAFETY REQUIREMENTS (IEC 61810-1:2015/COR1:2018)
I.S. EN 285:2015	STERILIZATION - STEAM STERILIZERS - LARGE STERILIZERS
11/30246431 DC : 0	BS EN 62548 - DESIGN REQUIREMENTS FOR PHOTOVOLTAIC (PV) ARRAYS
04/30095682 DC : DRAFT APR 2004	IEC 60974-1 ED.3 - ARC WELDING EQUIPMENT - PART 1: WELDING POWER SOURCES
EN 60728-11 : 2017	CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 11: SAFETY (IEC 60728-11:2016 + COR1:2016)
IEC 60364-7-712:2017	Low voltage electrical installations - Part 7-712: Requirements for special installations or locations - Solar photovoltaic (PV) power supply systems
09/30214460 DC : 0	BS EN 50548 - JUNCTION BOXES FOR PHOTOVOLTAIC MODULES
BS EN 62790 : 2015	JUNCTION BOXES FOR PHOTOVOLTAIC MODULES - SAFETY REQUIREMENTS AND TESTS
I.S. EN 60974-1:2012	ARC WELDING EQUIPMENT - PART 1: WELDING POWER SOURCES (IEC 60974-1:2012 (EQV))
I.S. EN 50174-2:2009	INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 2: INSTALLATION PLANNING AND PRACTICES INSIDE BUILDINGS
13/30287037 DC : 0	BS EN 62870 ED. 1.0 - ELECTRICAL INSTALLATIONS FOR LIGHTING AND BEACONING OF AERODROMES - SAFETY SECONDARY CIRCUITS IN SERIES CIRCUITS - GENERAL SAFETY REQUIREMENT
CEI EN 50604-1 : 1ED 2017	SECONDARY LITHIUM BATTERIES FOR LIGHT EV (ELECTRIC VEHICLE) APPLICATIONS - PART 1: GENERAL SAFETY REQUIREMENTS AND TEST METHODS
IEC 60364-4-41:2005+AMD1:2017 CSV	Low voltage electrical installations - Part 4-41: Protection for safety - Protection against electric shock
CEI 109-5 : 2011	INSULATION COORDINATION FOR EQUIPMENT WITHIN LOW-VOLTAGE SYSTEMS - PART 2-1: APPLICATION GUIDE - EXPLANATION OF THE APPLICATION OF THE IEC 60664 SERIES, DIMENSIONING EXAMPLES AND DIELECTRIC TESTING
BIS IS/IEC 60947-5-1 : 2003	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - SECTION 1: ELECTROMECHANICAL CONTROL CIRCUIT DEVICES
14/30281866 DC : 0	BS ISO 18178 - GLASS IN BUILDING - LAMINATED SOLAR PV GLASS
BS EN 60255-27 : 2014	MEASURING RELAYS AND PROTECTION EQUIPMENT - PART 27: PRODUCT SAFETY REQUIREMENTS
UNE-EN 62718:2016	Railway applications - Rolling stock - DC supplied electronic ballasts for lighting fluorescent lamps
03/318811 DC : DRAFT NOV 2003	IEC 62257-5 TS ED.1 - RECOMMENDATIONS FOR SMALL RENEWABLE ENERGY AND HYBRID SYSTEMS FOR RURAL ELECTRIFICATION - PART 5: SAFETY RULES - PROTECTION AGAINST ELECTRICAL HAZARDS
08/30187038 DC : DRAFT JULY 2008	BS EN 55016-2-3 AMD1 - SPECIFICATION FOR RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS AND METHODS - PART 2-3: METHODS OF MEASUREMENT OF DISTURBANCES AND IMMUNITY - RADIATED DISTURBANCE MEASUREMENTS
12/30260552 DC : 0	BS EN 50174-3:201X - INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 3: INSTALLATION PLANNING AND PRACTICES OUTSIDE BUILDINGS
BS EN 60974-4:2016	Arc welding equipment Periodic inspection and testing
BS EN 60974-5:2013 (published 2013-08)	Arc welding equipment Wire feeders
08/30176298 DC : DRAFT JAN 2008	BS EN 62477-1 - SAFETY REQUIREMENTS FOR POWER SEMICONDUCTOR CONVERTER SYSTEMS - PART 1: GENERAL
00/203525 DC : DRAFT AUG 2000	IEC 60364-4-41 - ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 4: PROTECTION FOR SAFETY - SECTION 41: PROTECTION AGAINST ELECTRIC SHOCK
CEI EN 61439-2 : 2012	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 2: POWER SWITCHGEAR AND CONTROLGEAR ASSEMBLIES
CEI EN 60947-5-9 : 2008	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-9: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - FLOW RATE SWITCHES
IEC 60947-5-1 : 4.0	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-1: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - ELECTROMECHANICAL CONTROL CIRCUIT DEVICES
BS EN 50604-1:2016	Secondary lithium batteries for light EV (electric vehicle) applications General safety requirements and test methods
I.S. EN ISO 18246:2017	ELECTRICALLY PROPELLED MOPEDS AND MOTORCYCLES - SAFETY REQUIREMENTS FOR CONDUCTIVE CONNECTION TO AN EXTERNAL ELECTRIC POWER SUPPLY (ISO 18246:2015)
NF EN 60664-1 : 2007	INSULATION COORDINATION FOR EQUIPMENT WITHIN LOW-VOLTAGE SYSTEMS - PART 1: PRINCIPLES, REQUIREMENTS AND TESTS
13/30278676 DC : 0	BS EN 285 - STERILIZATION - STEAM STERILIZERS - LARGE STERILIZERS
PD IEC/TS 62257-3:2015	Recommendations for renewable energy and hybrid systems for rural electrification Project development and management
IEC TS 63066:2017	Low-voltage docking connectors for removable energy storage units
UNE-EN 62353:2015	Medical electrical equipment - Recurrent test and test after repair of medical electrical equipment
CEI EN 55014-2 : 2016	ELECTROMAGNETIC COMPATIBILITY - REQUIREMENTS FOR HOUSEHOLD APPLIANCES, ELECTRIC TOOLS AND SIMILAR APPARATUS - PART 2: IMMUNITY - PRODUCT FAMILY STANDARD