• Shopping Cart
    There are no items in your cart

IEC 61156-1-1:2001

Current

Current

The latest, up-to-date edition.

Multicore and symmetrical pair/quad cables for digital communications - Part 1-1: Capability Approval - Generic specification

Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

English - French

Published date

27-02-2001

€41.59
Excluding VAT

FOREWORD
INTRODUCTION
1 General
  1.1 Scope
  1.2 Normative references
  1.3 Units, symbols and terminology
  1.4 Definitions
2 Quality assessment procedures
  2.1 General
      2.1.1 Eligibility for Capability Approval
      2.1.2 Subcontracting
      2.1.3 Rework and repair
  2.2 Procedures for the demonstration of capability
      2.2.1 Application for Capability Approval
      2.2.2 Granting of Capability Approval
      2.2.3 Capability Manual
      2.2.4 Quality Plans
      2.2.5 Capability Qualifying Components (CQCs)
      2.2.6 Demonstration and verification of capability
      2.2.7 Procedure to be followed in the event of CQC's
            failure
      2.2.8 Capability Approval report
  2.3 Capability Approval certificate
  2.4 Procedures following the granting of Capability
      Approval
      2.4.1 Maintenance of Capability Approval
      2.4.2 Changes to/or alteration of the Capability
            Approval
      2.4.3 Change to process machinery
  2.5 Release for delivery
3 Test and measurement procedures (general guidance)
Annex A (informative) Family: Symmetrical pair/quad
        cables, category 5, with common overall screen:
        example of guidance for the selection of CQCs

Which is a generic specification applies to Capability Approval requirements for multicore and symmetrical pair/quad cables for digital communications as specified in IEC 61156-1 series.

Committee
TC 46/SC 46C
DevelopmentNote
Stability Date: 2021. (11/2017)
DocumentType
Standard
Pages
19
PublisherName
International Electrotechnical Committee
Status
Current

Standards Relationship
NEN IEC 61156-1-1 : 2001 Identical

IEC 61156-2-2:2001 Multicore and symmetrical pair/quad cables for digital communications - Part 2-2: Horizontal floor wiring - Capability Approval - Sectional specification
IEC 61156-3-2:2001 Multicore and symmetrical pair/quad cables for digital communications - Part 3-2: Work area wiring - Capability Approval - Sectional specification
IEC 61156-4-2:2001 Multicore and symmetrical pair/quad cables for digital communications - Part 4-2: Riser cables - Capability approval - Sectional specification
IEC 61156-7-2:2003 Multicore and symmetrical pair/quad cables for digital communications - Part 7-2: Symmetrical pair cables with transmission characteristics up to 1 200 MHz - Capability Approval - Sectional specification for digital and analog communication cables
IEC 61156-5-2:2002 Multicore and symmetrical pair/quad cables for digital communications - Part 5-2: Symmetrical pair/quad cables with transmission characteristics up to 600 MHz - Horizontal floor wiring - Capability approval - Sectional specification
IEC 61156-6-2:2002 Multicore and symmetrical pair/quad cables for digital communications - Part 6-2: Symmetrical pair/quad cables with transmission characteristics up to 600 MHz - Work area wiring - Capability approval - Sectional specification

IEC 61156-3-1:2009 Multicore and symmetrical pair/quad cables for digital communications - Part 3-1: Work area wiring - Blank detail specification
IEC 60617-9:1996 Graphical symbols for diagrams - Part 9: Telecommunications - Switching and peripheral equipment
IEC 60617-10:1996 Graphical symbols for diagrams - Part 10: Telecommunications - Transmission
IECQ 001002-3:2005 IEC QUALITY ASSESSMENT SYSTEM FOR ELECTRONIC COMPONENTS (IECQ) - RULES OF PROCEDURE - PART 3: APPROVAL PROCEDURES
IEC 60617-3:1996 Graphical symbols for diagrams - Part 3: Conductors and connecting devices
IEC 60617-6:1996 Graphical symbols for diagrams - Part 6: Production and conversion of electrical energy
IEC 61156-2-1:2010 Multicore and symmetrical pair/quad cables for digital communications - Part 2-1: Horizontal floor wiring - Blank detail specification
IEC 61156-4-1:2009 Multicore and symmetrical pair/quad cables for digital communications - Part 4-1: Riser cables - Blank detail specification
IEC 61156-3-2:2001 Multicore and symmetrical pair/quad cables for digital communications - Part 3-2: Work area wiring - Capability Approval - Sectional specification
IEC 60027-1:1992 Letters symbols to be used in electrical technology - Part 1: General
IEC 61156-4-2:2001 Multicore and symmetrical pair/quad cables for digital communications - Part 4-2: Riser cables - Capability approval - Sectional specification
ISO 9002:1994 Quality systems — Model for quality assurance in production, installation and servicing
IEC 60617-5:1996 Graphical symbols for diagrams - Part 5: Semiconductors and electron tubes
IEC 61156-2:2010 Multicore and symmetrical pair/quad cables for digital communications - Part 2: Symmetrical pair/quad cables with transmission characteristics up to 100 MHz - Horizontal floor wiring - Sectional specification
IEC 60027-3:2002 Letter symbols to be used in electrical technology - Part 3: Logarithmic and related quantities, and their units
IEC 60617-1:1985 Graphical symbols for diagrams. Part 1: General information, general index. Cross-reference tables
IEC 61156-1:2007+AMD1:2009 CSV Multicore and symmetrical pair/quad cables for digital communications - Part 1: Generic specification
IEC 60617-13:1993 Graphical symbols for diagrams - Part 13: Analogue elements
ISO 9001:2015 Quality management systems — Requirements
IEC 60617-7:1996 Graphical symbols for diagrams - Part 7: Switchgear, controlgear and protective devices
IEC 60617-8:1996 Graphical symbols for diagrams - Part 8: Measuring instruments, lamps and signalling devices
IEC 60027-2:2005 Letter symbols to be used in electrical technology - Part 2: Telecommunications and electronics
IEC 60617-4:1996 Graphical symbols for diagrams - Part 4: Passive components
IEC 61156-4:2009 Multicore and symmetrical pair/quad cables for digital communications - Part 4: Riser cables - Sectional specification
IEC 60027-4:2006 Letter symbols to be used in electrical technology - Part 4: Rotating electric machines
IEC 61156-3:2008 Multicore and symmetrical pair/quad cables for digital communications - Part 3: Work area cable - Sectional specification
IEC 60027-2B:1980 Letter symbols to be used in electrical technology - Part 2: Telecommunications and electronics
IEC 61156-2-2:2001 Multicore and symmetrical pair/quad cables for digital communications - Part 2-2: Horizontal floor wiring - Capability Approval - Sectional specification
ISO 9000-1:1994 Quality management and quality assurance standards — Part 1: Guidelines for selection and use
IEC 60027-2A:1975 Letter symbols to be used in electrical technology - Part 2: Telecommunications and electronics - First supplement
IEC 60617-11:1996 Graphical symbols for diagrams - Part 11: Architectural and topographical installation plans and diagrams
IEC 60617-2:1996 Graphical symbols for diagrams - Partie 2: Symbol elements, qualifying symbols and other symbols having general application
IEC 60617-12:1997 Graphical symbols for diagrams - Part 12: Binary logic elements

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.