IEC 61156-5:2009+AMD1:2012 CSV
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Multicore and symmetrical pair/quad cables for digital communications - Part 5: Symmetrical pair/quad cables withtransmission characteristics up to 1 000 MHz - Horizontal floorwiring - Sectional specification
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
12-09-2022
English
11-12-2012
FOREWORD
1 Scope
2 Normative references
3 Terms and definitions
4 Installation considerations
5 Materials and cable construction
6 Characteristics and requirements
7 Category 5e multipair cable
8 Introduction to the blank detail specification
Annex A (informative) - Acronyms for common cable
constructions
Bibliography
IEC 61156-5:2009+A1:2012(E) describes the cables intended primarily for horizontal floor wiring as defined in ISO/IEC 11801. It covers individually screened, common screened and unscreened pairs or quads. The transmission characteristics and the frequency range ofthe cables are specified at 20 °C. Those cables are intended to beused to support the delivery of low voltage and power applications such as IEEE 802.3af (Power over Ethernet) and IEEE 802.3at (Power over Ethernet Plus). This edition constitutes a technical revision.This edition includes the following significant technical changes with respect to the previous edition:
- new requirements for new Cat6A and Cat7A cables;
- revised requirements and tests for Cat5e, Cat6 and Cat7 cables. The contents of the corrigendum of February 2010 have been includedin this copy. This publication is to be read in conjunction with IEC61156-1:2002. This consolidated version consists of the second edition (2009) and its amendment 1 (2012). Therefore, no need to order amendment inaddition to this publication.
DevelopmentNote |
To be read in conjunction with IEC 61156-1. (03/2002) Supersedes IEC TS 61873. (05/2012) Stability date: 2017. (10/2012)
|
DocumentType |
Standard
|
Pages |
24
|
PublisherName |
International Electrotechnical Committee
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
Standards | Relationship |
IS 14493 : Part 5 : 2018 | Identical |
NEN IEC 61156-5 : 2009 C1 2009 | Identical |
PD IEC/TR 61156-1-6:2016 | Multicore and symmetrical pair/quad cables for digital communications Nominal DC-resistance values of floor-wiring and work-area cables for digital communications |
CSA ISO/IEC 15018 : 2005 : R2010 | INFORMATION TECHNOLOGY - GENERIC CABLING FOR HOMES |
CSA ISO/IEC 15018:2005 | INFORMATION TECHNOLOGY - GENERIC CABLING FOR HOMES |
IEC TR 61156-1-3:2011 | Multicore and symmetrical pair/quad cables for digital communications - Part 1-3: Electrical transmission parameters for modelling cable assemblies using symmetrical pair/quad cables |
CSA ISO/IEC 15018 : 2005 : INC : AMD 1 : 2010 : R201000 | INFORMATION TECHNOLOGY - GENERIC CABLING FOR HOMES |
I.S. EN 61784-5-6:2013 | INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 5-6: INSTALLATION OF FIELDBUSES - INSTALLATION PROFILES FOR CPF 6 |
EN 61375-2-5:2015 | Electronic railway equipment - Train communication network (TCN) - Part 2-5: Ethernet train backbone |
EN 61784-5-3:2013 | Industrial communication networks - Profiles - Part 5-3: Installation of fieldbuses - Installation profiles for CPF 3 |
EN 62087-3:2016 | Audio, video, and related equipment - Determination of power consumption - Part 3: Television sets |
NF EN 61935-1 : 2010 | SPECIFICATION FOR THE TESTING OF BALANCED AND COAXIAL INFORMATION TECHNOLOGY CABLING - PART 1: INSTALLED BALANCED CABLING AS SPECIFIED IN THE STANDARDS SERIES EN 50173 |
BS EN 60603-7-1:2011 | Connectors for electronic equipment Detail specification for 8-way, shielded, free and fixed connectors |
CEI EN 61935-1 : 2010 | SPECIFICATION FOR THE TESTING OF BALANCED AND COAXIAL INFORMATION TECHNOLOGY CABLING - PART 1: INSTALLED BALANCED CABLING AS SPECIFIED IN THE STANDARDS SERIES EN 50173 |
10/30217641 DC : 0 | BS IEC PAS 61156-1-4 - SYMMETRICAL PAIR/QUAD CABLES FOR DIGITAL COMMUNICATIONS WITH TRANSMISSION CHARACTERISTICS UP TO 1000 MHZ - PART 1-4: ASSESSMENT OF THE CONDUCTOR HEATING IN BUNDLED DATA GRADE CABLES DUE TO THE DEPLOYMENT OF POWER TRANSMISSION OVER THE COMMON MODE CIRCUITS OF EITHER 2 OR 4 PAIRS BASED ON THE IEEE 802.3 POE/POEP PROTOCOL |
14/30296057 DC : 0 | BS EN 61156-9 ED.1.0 - MULTICORE AND SYMMETRICAL PAIR/QUAD CABLES FOR DIGITAL COMMUNICATIONS - PART 9: CABLES FOR HORIZONTAL FLOOR WIRING WITH TRANSMISSION CHARACTERISTICS UP TO 2 GHZ - SECTIONAL SPECIFICATION |
06/30152213 DC : DRAFT JUNE 2006 | BS EN 60603-7-1 ED. 2 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7-1: DETAIL SPECIFICATION FOR 8-WAY, SHIELDED, FREE AND FIXED CONNECTORS |
06/30129695 DC : DRAFT MAR 2006 | |
BS IEC 61935-2-23:2015 | Generic cabling systems. Specification for the testing of balanced communication cabling in accordance with ISO/IEC 11801 Cord and work area cord category 7. Blank detail specification |
00/246334 DC : DRAFT DEC 2000 | IEC 61156-6 - MULTICORE AND SYMMETRICAL PAIR/QUAD CABLES FOR DIGITAL COMMUNICATIONS - PART 6: SYMMETRICAL PAIR/QUAD CABLES FOR DIGITAL COMMUNICATIONS WITH TRANSMISSION CHARACTERISTICS UP TO 600 MHZ - WORK AREA WIRING - SECTIONAL SPECIFICATION |
I.S. EN 61784-5-12:2012 | INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 5-12: INSTALLATION OF FIELDBUSES - INSTALLATION PROFILES FOR CPF 12 (IEC 61784-5-12:2010) |
ISO/IEC 11801-1:2017 | Information technology — Generic cabling for customer premises — Part 1: General requirements |
ISO/IEC 11801-2:2017 | Information technology Generic cabling for customer premises Part 2: Office premises |
IEC PAS 61156-1-4:2010 | Multicore and symmetrical pair/quad cables for digital communications - Part 1-4: Symmetrical pair/quad cables with transmission characteristics up to 1 000 MHz - Conductor heating of bundled data grade cables for limited power transmission based on IEEE 802.3 |
BS EN 60603-7 : 2009 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7: DETAIL SPECIFICATION FOR 8-WAY, UNSHIELDED, FREE AND FIXED CONNECTORS |
IEC 61784-5-6:2013 | Industrial communication networks - Profiles - Part 5-6: Installation of fieldbuses - Installation profiles for CPF 6 |
EN 60603-7:2009/A1:2011 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7: DETAIL SPECIFICATION FOR 8-WAY, UNSHIELDED, FREE AND FIXED CONNECTORS (IEC 60603-7:2008/A1:2011) |
I.S. EN 60603-7-1:2011 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7-1: DETAIL SPECIFICATION FOR 8-WAY, SHIELDED, FREE AND FIXED CONNECTORS |
DD IEC/PAS 61156-1-4:2010 | Multicore and symmetrical pair/quad cables for digital communications Symmetrical pair/quad cables with transmission characteristics up to 1000 MHz. Conductor heating of bundled data grade cables for limited power transmission based on IEEE 802.3 |
16/30325974 DC : 0 | BS ISO/IEC 11801-2 - INFORMATION TECHNOLOGY - GENERIC CABLING FOR CUSTOMER PREMISES - PART 2: OFFICE PREMISES |
BS EN 61375-2-5:2015 | Electronic railway equipment. Train communication network (TCN) Ethernet train backbone |
BS ISO/IEC 11801-2:2017 | Information technology. Generic cabling for customer premises Office premises |
BS EN 62087-3:2016 | Audio, video, and related equipment. Determination of power consumption Television sets |
BS EN 61784-5-6:2013 | Industrial communication networks. Profiles Installation of fieldbuses. Installation profiles for CPF 6 |
14/30296061 DC : 0 | BS EN 61156-10 ED.1.0 - MULTICORE AND SYMMETRICAL PAIR/QUAD CABLES FOR DIGITAL COMMUNICATIONS - PART 10: CABLES FOR WORK AREA WIRING WITH TRANSMISSION CHARACTERISTICS UP TO 2 GHZ - SECTIONAL SPECIFICATION |
NF EN 60603-7-3 : DEC 2010 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7-3: DETAIL SPECIFICATION FOR 8-WAY, SHIELDED, FREE AND FIXED CONNECTORS, FOR DATA TRANSMISSIONS WITH FREQUENCIES UP TO 100 MHZ |
IEC 61935-1:2015 | Specification for the testing of balanced and coaxial information technology cabling - Part 1: Installed balanced cabling as specified in ISO/IEC 11801 and related standards |
IEC 61156-5-1:2009 | Multicore and symmetrical pair/quad cables for digital communications - Part 5-1: Symmetrical pair/quad cables with transmission characteristics up to 1 000 MHz - Horizontal floor wiring - Blank detail specification |
BS EN 61784-5-2:2013 | Industrial communication networks. Profiles Installation of fieldbuses. Installation profiles for CPF 2 |
BS EN 61784-5-12 : 2012 | INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 5-12: INSTALLATION OF FIELDBUSES - INSTALLATION PROFILES FOR CPF 12 |
I.S. EN 61076-3-104:2017 | CONNECTORS FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-104: DETAIL SPECIFICATION FOR 8-WAY, SHIELDED FREE AND FIXED CONNECTORS FOR DATA TRANSMISSIONS WITH FREQUENCIES UP TO 2000 MHZ |
ISO/IEC 11801:2002 | Information technology Generic cabling for customer premises |
ISO/IEC 15018:2004 | Information technology Generic cabling for homes |
IEC 61076-3-104:2017 | Connectors for electrical and electronic equipment - Product requirements - Part 3-104: Detail specification for 8-way, shielded free and fixed connectors for data transmissions with frequencies up to 2 000 MHz |
IEC 62255-1:2003 | Multicore and symmetrical pair/quad cables for broadband digital communications (high bit rate digital access telecommunication networks) - Outside plant cables - Part 1: Generic specification |
IEC 61156-5-2:2002 | Multicore and symmetrical pair/quad cables for digital communications - Part 5-2: Symmetrical pair/quad cables with transmission characteristics up to 600 MHz - Horizontal floor wiring - Capability approval - Sectional specification |
IEC 61935-2-23:2015 | Generic cabling systems - Specification for the testing of balanced communication cabling in accordance with ISO/IEC 11801 - Part 2-23: Cord and work area cord category 7 - Blank detail specification |
IEC 60603-7:2008+AMD1:2011 CSV | Connectors for electronic equipment - Part 7: Detail specification for 8-way, unshielded, free and fixed connectors |
IEC 60603-7-1:2011 | Connectors for electronic equipment - Part 7-1: Detail specification for 8-way, shielded, free and fixed connectors |
BS IEC 61156-9:2016 | Multicore and symmetrical pair/quad cables for digital communications Cables for channels with transmission characteristics up to 2 GHz. Sectional specification |
NF EN 60603-7 : 2010 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7: DETAIL SPECIFICATION FOR 8-WAY, UNSHIELDED, FREE AND FIXED CONNECTORS |
IEC 61156-9:2016 | Multicore and symmetrical pair/quad cables for digital communications - Part 9: Cables for channels with transmission characteristics up to 2 GHz - Sectional specification |
PD IEC/TR 62839-1:2014 | Environmental declaration Wires, cables and accessory products. Specific rules |
BS PAS 122(2009) : 2009 | SPECIFICATION FOR THE INSTALLATION OF AUDIOVISUAL EQUIPMENT IN CLASSROOMS AND GENERAL PUBLICLY ACCESSIBLE AREAS |
16/30325971 DC : 0 | BS ISO/IEC 11801-1 - INFORMATION TECHNOLOGY - GENERIC CABLING FOR CUSTOMER PREMISES - PART 1: GENERAL REQUIREMENTS |
NF EN 60603-7-4 : 2010 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7-4: DETAIL SPECIFICATION FOR 8-WAY, UNSHIELDED, FREE AND FIXED CONNECTORS, FOR DATA TRANSMISSIONS WITH FREQUENCIES UP TO 250 MHZ |
BS EN 61935-1:2009 | Specification for the testing of balanced and coaxial information technology cabling Installed balanced cabling as specified in the standards series EN 50173 |
05/30129688 DC : DRAFT AUG 2005 | IEC 61156-5-1 ED 2 - MULTICORE AND SYMMETRICAL PAIR/QUAD CABLES FOR DIGITAL COMMUNICATIONS - PART 5-1: SYMMETRICAL PAIR/QUAD CABLES WITH TRANSMISSION CHARACTERISTICS UP TO 600 MHZ - HORIZONTAL FLOOR WIRING - BLANK DETAIL SPECIFICATION |
I.S. EN 61784-5-3:2013 | INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 5-3: INSTALLATION OF FIELDBUSES - INSTALLATION PROFILES FOR CPF 3 |
I.S. EN 61375-2-5:2015 | ELECTRONIC RAILWAY EQUIPMENT - TRAIN COMMUNICATION NETWORK (TCN) - PART 2-5: ETHERNET TRAIN BACKBONE |
I.S. EN 60603-7:2009 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7: DETAIL SPECIFICATION FOR 8-WAY, UNSHIELDED, FREE AND FIXED CONNECTORS (IEC 60603-7:2008) |
IEC TR 60092-370:2009 | Electrical installations in ships - Part 370: Guidance on the selection of cables for telecommunication and data transfer including radio-frequency cables |
IEC 61935-2-24:2015 | Generic cabling systems - Specification for the testing of balanced communication cabling in accordance with ISO/IEC 11801 - Part 2-24: Cord and work area cord category 7<sub>A</sub> - Blank detail specification |
ISO/IEC 24740:2008 | Information technology Responsive Link (RL) |
I.S. EN 61784-5-2:2013 | INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 5-2: INSTALLATION OF FIELDBUSES - INSTALLATION PROFILES FOR CPF 2 |
IEC TR 62839-1:2014 | Environmental declaration - Part 1: Wires, cables and accessory products - Specific rules |
IEC 61375-2-5:2014 | Electronic railway equipment - Train communication network (TCN) - Part 2-5: Ethernet train backbone |
BS EN 61784-5-3:2013 | Industrial communication networks. Profiles Installation of fieldbuses. Installation profiles for CPF 3 |
IEC 61784-5-12:2010+AMD1:2015 CSV | Industrial communication networks - Profiles - Part 5-12: Installation of fieldbuses - Installation profiles for CPF 12 |
IEC 61784-5-15:2010+AMD1:2015 CSV | Industrial communication networks - Profiles - Part 5-15: Installation of fieldbuses - Installation profiles for CPF 15 |
IEC 61784-5-2:2013 | Industrial communication networks - Profiles - Part 5-2: Installation of fieldbuses - Installation profiles for CPF 2 |
IEC 62087-3:2015 | Audio, video, and related equipment - Determination of power consumption - Part 3: Television sets |
10/30218335 DC : 0 | BS EN 60603-7-1 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7-1: DETAIL SPECIFICATION FOR 8-WAY, SHIELDED, FREE AND FIXED CONNECTORS |
BS IEC 61935-2-24:2015 | Generic cabling systems. Specification for the testing of balanced communication cabling in accordance with ISO/IEC 11801 Cord and work area cord category 7A. Blank detail specification |
15/30331243 DC : 0 | BS EN 62087-7 ED. 1.0 - AUDIO, VIDEO AND RELATED EQUIPMENT - METHODS OF MEASUREMENT FOR POWER CONSUMPTION - PART 7: COMPUTER MONITORS |
BS EN 61076-3-104:2017 | Connectors for electrical and electronic equipment. Product requirements Detail specification for 8-way, shielded free and fixed connectors for data transmissions with frequencies up to 2 000 MHz |
CEI EN 61784-5-3 : 2014 | INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 5-3: INSTALLATION OF FIELDBUSES - INSTALLATION PROFILES FOR CPF 3 |
CSA ISO/IEC 15018 : 2005 : INC : AMD 1 : 2010 : R2015 | INFORMATION TECHNOLOGY - GENERIC CABLING FOR HOMES |
I.S. EN 62087-3:2016 | AUDIO, VIDEO, AND RELATED EQUIPMENT - DETERMINATION OF POWER CONSUMPTION - PART 3: TELEVISION SETS |
CEI EN 61784-5-6 : 2014 | INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 5-6: INSTALLATION OF FIELDBUSES - INSTALLATION PROFILES FOR CPF 6 |
CEI EN 61784-5-2 : 2014 | INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 5-2: INSTALLATION OF FIELDBUSES - INSTALLATION PROFILES FOR CPF 2 |
I.S. EN 61935-1:2009 | SPECIFICATION FOR THE TESTING OF BALANCED AND COAXIAL INFORMATION TECHNOLOGY CABLING - PART 1: INSTALLED BALANCED CABLING AS SPECIFIED IN THE STANDARDS SERIES EN 50173 |
EN 61076-3-104:2017 | Connectors for electrical and electronic equipment - Product requirements - Part 3-104: Detail specification for 8-way, shielded free and fixed connectors for data transmissions with frequencies up to 2 000 MHz |
EN 61784-5-12:2012/A1:2015 | INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 5-12: INSTALLATION OF FIELDBUSES - INSTALLATION PROFILES FOR CPF 12 (IEC 61784-5-12:2010/A1:2015) |
EN 61784-5-6:2013 | Industrial communication networks - Profiles - Part 5-6: Installation of fieldbuses - Installation profiles for CPF 6 |
EN 61784-5-2:2013 | Industrial communication networks - Profiles - Part 5-2: Installation of fieldbuses - Installation profiles for CPF 2 |
EN 60603-7-1:2011 | Connectors for electronic equipment - Part 7-1: Detail specification for 8-way, shielded, free and fixed connectors |
EN 61935-1:2009 | SPECIFICATION FOR THE TESTING OF BALANCED AND COAXIAL INFORMATION TECHNOLOGY CABLING - PART 1: INSTALLED BALANCED CABLING AS SPECIFIED IN THE STANDARDS SERIES EN 50173 |
CSA ISO/IEC 24740 : 2008 | INFORMATION TECHNOLOGY - RESPONSIVE LINK (RL) |
CSA ISO/IEC 24740 : 2008 : R2013 | INFORMATION TECHNOLOGY - RESPONSIVE LINK (RL) |
IEC 60304:1982 | Standard colours for insulation for low-frequency cables and wires |
ISO/IEC 11801:2002 | Information technology Generic cabling for customer premises |
IEC 61156-5-1:2009 | Multicore and symmetrical pair/quad cables for digital communications - Part 5-1: Symmetrical pair/quad cables with transmission characteristics up to 1 000 MHz - Horizontal floor wiring - Blank detail specification |
AS 11801.2:2019 | Information technology - Generic cabling for customer premises Office premises (ISO/IEC 11801-2:2017, MOD) |
IEC 61156-1:2007+AMD1:2009 CSV | Multicore and symmetrical pair/quad cables for digital communications - Part 1: Generic specification |
IEC 62153-4-5:2006 | Metallic communication cables test methods - Part 4-5: Electromagnetic compatibility (EMC) - Coupling or screening attenuation - Absorbing clamp method |
IEC 62153-4-9:2008 | Metallic communication cable test methods - Part 4-9: Electromagnetic compatibility (EMC) - Coupling attenuation of screened balanced cables, triaxial method |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.