IEC 61241-1:2004

Superseded

Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View superseded by

Electrical apparatus for use in the presence of combustible dust - Part 1: Protection by enclosures "tD"

Available format(s): Hardcopy, PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

Superseded date: 13-11-2008

Language(s): English - French, Spanish, Castilian

Published date: 10-05-2004

Publisher: International Electrotechnical Committee

Table of Contents - (Show below) - (Hide below)

FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms and definitions
4 Construction
5 Practice A and practice B
6 Supplementary requirements for electrical apparatus protected
  by enclosures for practice A for use in zones 20, 21 and 22
7 Supplementary requirements for electrical apparatus protected
  by enclosures for practice B for use in zone 20 or 21
  7.1 Joints
      7.1.1 Plain joints
      7.1.2 Spigotted joints
      7.1.3 Gasketed joints
  7.2 Operating rods, spindles or shafts
      7.2.1 General
      7.2.2 Running contact seals
      7.2.3 Power shafts
      7.2.4 Operating rods
  7.3 Clearance of bolts
8 Verification and tests
  8.1 General
  8.2 Type tests
      8.2.1 Tests for dust exclusion by enclosures
      8.2.2 Thermal tests
9 Marking
Bibliography
Figures
Tables

Abstract - (Show below) - (Hide below)

Applicable to electrical apparatus protected by enclosures and surface temperature limitation for use in areas where combustible dust may be present in quantities which could lead to a fire or explosion hazard. Specifies requirements for design, construction and testing of electrical apparatus.The ignition protection is based on the limitation of the maximum surface temperature of the enclosure and on other surfaces which could be in contact with dust and on the restriction of dust ingress into the enclosure by the use of "dust-tight" or "dust-protected" enclosures.

General Product Information - (Show below) - (Hide below)

Development Note	Together with IEC 61241-0 supersedes IEC 61241-1-1. (07/2004)
Document Type	Standard
ISBN
Pages
Published
Publisher	International Electrotechnical Committee
Status	Superseded
Superseded By	IEC 60079-31:2013
Supersedes	IEC 61241-1-1:1999

International Equivalents – Equivalent Standard(s) & Relationship - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
NF EN 61241-1 : 2004	Identical
NEN EN IEC 61241-1 : 2004 C11 2007	Identical
I.S. EN 61241-1:2004	Identical
PN EN 61241-1 : 2005 AC 2007	Identical
SANS 61241-1 : 1ED 2005	Identical
SAC GB 12476-5 : 2013	Identical
AS/NZS 61241.1:2005	Identical
VDE 0170-15-1 : 2014	Identical
UNE-EN 61241-1:2005	Identical
BIS IS/IEC 61241-1 : 2004	Identical
BS EN 61241-1:2004	Identical
CEI EN 61241-1 : 2006	Identical
EN 61241-1:2004/corrigendum Dec. 2006	Identical
AS/NZS 61241.18:2005	Identical

Standards Referenced By This Book - (Show below) - (Hide below)

I.S. EN 61241-14:2004	ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 14: SELECTION AND INSTALLATION
11/30248849 DC : 0	BS EN 50050-3:2011 - ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - PART 3: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE FLOCK
BS EN 61241-0:2006 (published 2007-01)	Electrical apparatus for use in the presence of combustible dust General requirements
BS EN 61241-17:2005	ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 17: INSPECTION AND MAINTENANCE OF ELECTRICAL INSTALLATIONS IN HAZARDOUS AREAS (OTHER THAN MINES)
S.R. CLC/TS 60034-31:2011	ROTATING ELECTRICAL MACHINES - PART 31: SELECTION OF ENERGY-EFFICIENT MOTORS INCLUDING VARIABLE SPEED APPLICATIONS - APPLICATION GUIDE
I.S. EN 61241-11:2007	ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 11: PROTECTION BY INTRINSIC SAFETY "ID"
NF EN 50050 : 2007	ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT
BS EN 13463-1:2009	NON-ELECTRICAL EQUIPMENT FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 1: BASIC METHOD AND REQUIREMENTS
UNE-EN 1127-1:2012	Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology
BS EN 61241-18:2004	ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 18: PROTECTION BY ENCAPSULATION "MD"
EN 61241-14:2004	Electrical apparatus for use in the presence of combustible dust - Part 14: Selection and installation
EN 13463-1:2009	Non-electrical equipment for use in potentially explosive atmospheres - Part 1: Basic method and requirements
EN 61241-17:2005	Electrical apparatus for use in the presence of combustible dust - Part 17: Inspection and maintenance of electrical installations in hazardous areas (other than mines)
EN 50050:2006	Electrical apparatus for potentially explosive atmospheres - Electrostatic hand-held spraying equipment
BS EN 61241-14:2004	Electrical apparatus for use in the presence of combustible dust Selection and installation
10/30230365 DC : 0	BS EN 50050-2 - ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT SAFETY REQUIREMENTS - PART 2: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE COATING POWDER
DD IEC TS 60034-31 : DRAFT JULY 2010	ROTATING ELECTRICAL MACHINES - PART 31: SELECTION OF ENERGY-EFFICIENT MOTORS INCLUDING VARIABLE SPEED APPLICATIONS - APPLICATION GUIDE
12/30270980 DC : 0	BS EN 1127-2 - EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 2: BASIC CONCEPTS AND METHODOLOGY FOR MINING
IEC TS 60034-31:2010	Rotating electrical machines - Part 31: Selection of energy-efficient motors including variable speed applications - Application guide
I.S. EN 1127-1:2011	EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY
CLC/TS 60034-31:2011	Rotating electrical machines - Part 31: Selection of energy-efficient motors including variable speed applications - Application guide
DIN EN 1127-1:2011-10	EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY
DIN EN 13463-1:2009-07	NON-ELECTRICAL EQUIPMENT FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 1: BASIC METHOD AND REQUIREMENTS
EN 60079-14:2014/AC:2016	EXPLOSIVE ATMOSPHERES - PART 14: ELECTRICAL INSTALLATIONS DESIGN, SELECTION AND ERECTION (IEC 60079-14:2013/COR1:2016)
VDI 2263 Blatt 7:2010-07	DUST FIRES AND DUST EXPLOSIONS - HAZARDS - ASSESSMENT - PROTECTIVE MEASURES - DUST FIRES AND EXPLOSION PROTECTION IN SPRAYING AND DRYING INTEGRATED EQUIPMENT
I.S. EN 13463-1:2009	NON-ELECTRICAL EQUIPMENT FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 1: BASIC METHOD AND REQUIREMENTS
I.S. EN 50050:2006	ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT
BS EN 1127-1:2019	Explosive atmospheres. Explosion prevention and protection Basic concepts and methodology
IEC 61241-0:2004	Electrical apparatus for use in the presence of combustible dust - Part 0: General requirements
EEMUA 186 : 2016	A PRACTITIONER'S HANDBOOK FOR POTENTIALLY EXPLOSIVE ATMOSPHERES
UNE-EN 60079-14:2016	Explosive atmospheres - Part 14: Electrical installations design, selection and erection
IEC 61241-14:2004	Electrical apparatus for use in the presence of combustible dust - Part 14: Selection and installation
IEC 61241-17:2005	Electrical apparatus for use in the presence of combustible dust - Part 17: Inspection and maintenance of electrical installations in hazardous areas (other than mines)
BS EN 60079-14:2014	Explosive atmospheres Electrical installations design, selection and erection
UNI EN 13463-1 : 2009	NON-ELECTRICAL EQUIPMENT FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 1: BASIC METHOD AND REQUIREMENTS
08/30183108 DC : DRAFT MAY 2008	BS IEC/TS 60034-31 - ROTATING ELECTRICAL MACHINES - PART 31: GUIDE FOR THE SELECTION AND APPLICATION OF ENERGY-EFFICIENT MOTORS INCLUDING VARIABLE-SPEED APPLICATIONS
CSA C22.4 PACKAGE : 2009	CONSISTS OF C22.4 NO. 1-09, OBJECTIVE-BASED INDUSTRIAL ELECTRICAL CODE AND C22.4 NO. 2-09, OBJECTIVE-BASED INDUSTRIAL ELECTRICAL CODE - SAFETY MANAGEMENT SYSTEM REQUIREMENTS
BS EN 61241-11:2006 (published 2007-02)	Electrical apparatus for use in the presence of combustible dust Protection by intrinsic safety \'iD\'
PREN 50050-3 : DRAFT 2011	ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - PART 3: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE FLOCK
PREN 50050-2 : DRAFT 2011	ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - PART 2: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE COATING POWDER
DD CLC/TS 60034-31:2011	Rotating electrical machines Selection of energy-efficient motors including variable speed applications. Application guide
11/30248845 DC : 0	BS EN 50050-2:2011 - ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - PART 2: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE COATING POWDER
UNI EN 1127-1 : 2011	EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY
I.S. EN 61241-17:2005	ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 17: INSPECTION AND MAINTENANCE OF ELECTRICAL INSTALLATIONS IN HAZARDOUS AREAS (OTHER THAN MINES)
BS EN 50050:2006	ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT
I.S. EN 61241-0:2006	ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 0: GENERAL REQUIREMENTS
IEC 61241-11:2005	Electrical apparatus for use in the presence of combustible dust - Part 11: Protection by intrinsic safety 'iD'
05/30134569 DC : DRAFT JUN 2005	IEC 60079-0. ED. 5.0 - ELECTRICAL APPARATUS FOR EXPLOSIVE ATMOSPHERES - PART 0: GENERAL REQUIREMENTS
IEC 61241-18:2004	Electrical apparatus for use in the presence of combustible dust - Part 18: Protection by encapsulation 'mD'
UNE-EN 13463-1:2011	Non-electrical equipment for use in potentially explosive atmospheres - Part 1: Basic method and requirements
EN 61241-18:2004	Electrical apparatus for use in the presence of combustible dust - Part 18: Protection by encapsulation "mD"
CSA C22.4 No. 1 : 2009(R2018)	OBJECTIVE-BASED INDUSTRIAL ELECTRICAL CODE
I.S. EN 60079-14:2014	EXPLOSIVE ATMOSPHERES - PART 14: ELECTRICAL INSTALLATIONS DESIGN, SELECTION AND ERECTION
PREN 1127-2 : DRAFT 2012	EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 2: BASIC CONCEPTS AND METHODOLOGY FOR MINING
BS EN 1127-1:2011	Explosive atmospheres. Explosion prevention and protection Basic concepts and methodology
12/30269297 DC : 0	BS EN 60079-14/ED 5 - EXPLOSIVE ATMOSPHERES - PART 14: ELECTRICAL INSTALLATIONS DESIGN, SELECTION AND ERECTION
EN 61241-11:2006	Electrical apparatus for use in the presence of combustible dust - Part 11: Protection by intrinsic safety "iD"
EN 1127-1:2011	Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology
EN 61241-0:2006	Electrical apparatus for use in the presence of combustible dust - Part 0: General requirements

Standards Referencing This Book - (Show below) - (Hide below)

IEC 60243-1:2013	Electric strength of insulating materials - Test methods - Part 1: Tests at power frequencies
IEC 60662:2011	High-pressure sodium vapour lamps - Performance specifications
IEC 60192:2001	Low-pressure sodium vapour lamps - Performance specifications
ISO 4225:1994	Air quality General aspects Vocabulary
IEC 61241-0:2004	Electrical apparatus for use in the presence of combustible dust - Part 0: General requirements
IEC 60216-2:2005	Electrical insulating materials - Thermal endurance properties - Part 2: Determination of thermal endurance properties of electrical insulating materials - Choice of test criteria
IEC 60050-426:2008	International Electrotechnical Vocabulary (IEV) - Part 426: Equipment for explosive atmospheres
IEC 60079-11:2011	Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"
IEC 60093:1980	Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV	Degrees of protection provided by enclosures (IP Code)
IEC 60079-0:2011	Explosive atmospheres - Part 0: Equipment - General requirements
IEC 60947-3:2008+AMD1:2012+AMD2:2015 CSV	Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units
ISO 178:2010	Plastics Determination of flexural properties
IEC 60216-1:2013	Electrical insulating materials - Thermal endurance properties - Part 1: Ageing procedures and evaluation of test results
IEC 61241-14:2004	Electrical apparatus for use in the presence of combustible dust - Part 14: Selection and installation
IEC 61241-10:2004	Electrical apparatus for use in the presence of combustible dust - Part 10: Classification of areas where combustible dusts are or may be present

Categories associated with this Standard - (Show below) - (Hide below)

Sub-Categories associated with this Standard - (Show below) - (Hide below)

Add To Cart

Product Format

Quantity

Buy now

Add to cart

Create account