Skip to content
Please enter a keyword to search

  • IEC 61291-1:2012

    View superseded by
    Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
    View superseded by

    Optical amplifiers - Part 1: Generic specification

    Available format(s):  Hardcopy, PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

    Superseded date:  31-12-2021

    Language(s):  English - French

    Published date:  04-04-2012

    Publisher:  International Electrotechnical Committee

    Add To Cart

    Abstract - (Show below) - (Hide below)

    IEC 61291-1:2012 applies to all commercially available optical amplifiers (OAs) and optically amplified assemblies. It applies to OAs using optically pumped fibres (OFAs based either on rare-earth doped fibres or on the Raman effect), semiconductors (SOAs), and waveguides (POWAs). This third edition cancels and replaces the second edition published in 2006. It is a technical revision that includes the following significant changes: the definitions related to transient behaviour have been extensively updated with terms from the 61290-4 series and the definition for gain ripple has been added.

    General Product Information - (Show below) - (Hide below)

    Committee TC 86/SC 86C
    Document Type Standard
    Publisher International Electrotechnical Committee
    Status Superseded
    Superseded By
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    CEI EN 61290-10-4 : 2008 OPTICAL AMPLIFIERS - TEST METHODS - PART 10-4: MULTICHANNEL PARAMETERS - INTERPOLATED SOURCE SUBTRACTION METHOD USING AN OPTICAL SPECTRUM ANALYZER
    13/30288113 DC : 0 BS EN 61290-1-1 - OPTICAL AMPLIFIERS - TEST METHODS - PART 1-1: POWER AND GAIN PARAMETERS - OPTICAL SPECTRUM ANALYZER METHOD
    I.S. EN 61290-3-2:2008 OPTICAL AMPLIFIERS - TEST METHODS - PART 3-2: NOISE FIGURE PARAMETERS - ELECTRICAL SPECTRUM ANALYZER METHOD
    BS EN 61290-2-3:1998 Optical fibre amplifiers. Basic specification Test methods for optical power parameters. Optical power meter
    IEC TR 61292-9:2017 Optical amplifiers - Part 9: Semiconductor optical amplifiers (SOAs)
    95/209463 DC : DRAFT JULY 1995 IEC 86/87/CDV-1 AND CDV-2 - FIBER OPTIC TERMINOLOGY
    09/30205272 DC : 0 BS EN 61290-4-2 - OPTICAL AMPLIFIERS - TEST METHODS - PART 4-2: GAIN TRANSIENT PARAMETERS - BROADBAND SOURCE METHOD
    I.S. EN 61290-5-2:2004 OPTICAL AMPLIFIERS - TEST METHODS - PART 5-2: REFLECTANCE PARAMETERS - ELECTRICAL SPECTRUM ANALYSER METHOD
    06/30154856 DC : DRAFT AUG 2006 EN 61291-2 - OPTICAL AMPLIFIERS - PART 2: DIGITAL APPLICATIONS - PERFORMANCE SPECIFICATION TEMPLATE
    BS EN 61290-2-1:1998 Optical fibre amplifiers. Basic specification Test methods for optical power parameters. Optical spectrum analyzer
    09/30205262 DC : 0 BS EN 61290-4-1 - OPTICAL AMPLIFIERS - TEST METHODS - PART 4-1: GAIN TRANSIENT PARAMETERS - TWO-WAVELENGTH METHOD
    CEI EN 61291-5-2 : 2005 OPTICAL AMPLIFIERS - PART 5-2: QUALIFICATION SPECIFICATIONS - RELIABILITY QUALIFICATION FOR OPTICAL FIBRE AMPLIFIERS
    07/30170378 DC : DRAFT AUG 2007 BS EN 61290-10-1 - OPTICAL AMPLIFIER TEST METHODS - PART 10-1: MULTICHANNEL PARAMETERS - PULSE METHOD USING AN OPTICAL SWITCH AND OPTICAL SPECTRUM ANALYZER
    BS EN 61281-1:1999 Fibre optic communication subsystems Generic specification
    I.S. EN 61290-3:2008 OPTICAL AMPLIFIERS - TEST METHODS - PART 3: NOISE FIGURE PARAMETERS
    NF EN 61290 2-1 : 1998 OPTICAL FIBRE AMPLIFIERS - BASIC SPECIFICATION - PART 2-1: TEST METHODS FOR OPTICAL POWER PARAMETERS - OPTICAL SPECTRUM ANALYZER
    CEI EN 61291-4 : 2012 OPTICAL AMPLIFIERS - PART 4: MULTICHANNEL APPLICATIONS - PERFORMANCE SPECIFICATION TEMPLATE
    EN 61290-5-3:2002 Optical fibre amplifiers - Basic specification - Part 5-3: Test methods for reflectance parameters - Reflectance tolerance using an electrical spectrum analyser
    EN 61290-5-2:2004 Optical amplifiers - Test methods - Part 5-2: Reflectance parameters - Electrical spectrum analyser method
    EN 61291-2:2016 Optical amplifiers - Part 2: Single channel applications - Performance specification template
    EN 61290-2-1 : 1998 OPTICAL FIBRE AMPLIFIERS - BASIC SPECIFICATION - TEST METHODS FOR OPTICAL POWER PARAMETERS - OPTICAL SPECTRUM ANALYZER
    EN 61290-10-2:2008 Optical amplifiers - Test methods - Part 10-2: Multichannel parameters - Pulse method using a gated optical spectrum analyzer
    EN 60728-13:2010 Cable networks for television signals, sound signals and interactive services - Part 13: Optical systems for broadcast signal transmissions
    EN 61290-1:2015 Optical amplifiers - Test methods - Part 1: Power and gain parameters
    EN 61291-4:2012 Optical amplifiers - Part 4: Multichannel applications - Performance specification template
    EN 61290-4-3:2015 Optical amplifiers - Test methods - Part 4-3: Power transient parameters - Single channel optical amplifiers in output power control
    EN 61290-7-1:2007 Optical amplifiers - Test methods - Part 7-1: Out-of-band insertion losses - Filtered optical power meter method
    EN 61291-5-2:2017 Optical amplifiers - Part 5-2: Qualification specifications - Reliability qualification for optical fibre amplifiers
    BS EN 60728-13:2010 Cable networks for television signals, sound signals and interactive services Optical systems for broadcast signal transmissions
    CEI EN 61290-11-2 : 2006 OPTICAL AMPLIFIERS - TEST METHODS - PART 11-2: POLARIZATION MODE DISPERSION PARAMETER - POINCARE SPHERE ANALYSIS METHOD
    BS EN 50152-3-2:2016 Railway applications. Fixed installations. Particular requirements for a.c. switchgear Measurement, control and protection devices for specific use in a.c. traction systems. Current transformers
    BS EN 61290-3-2:2008 Optical amplifiers. Test methods Noise figure parameters. Electrical spectrum analyzer method
    13/30285534 DC : 0 BS EN 61290-1 - OPTICAL AMPLIFIERS - TEST METHODS - PART 1: OPTICAL POWER AND GAIN PARAMETERS
    BS EN 61290-3-3:2014 Optical amplifiers. Test methods Noise figure parameters. Signal power to total ASE power ratio
    PD IEC TR 61282-1:2000 Fibre optic communication system design guides Single-mode digital and analogue systems
    17/30335815 DC : 0 BS EN 61281-1 ED 2.0 - FIBRE OPTIC COMMUNICATION SUBSYSTEMS PART 1: GENERIC SPECIFICATION
    BS EN 61290-10-5:2014 Optical amplifiers. Test methods Multichannel parameters. Distributed Raman amplifier gain and noise figure
    15/30318620 DC : 0 BS EN 61291-2 ED 4.0 - OPTICAL AMPLIFIERS - PART 2: SINGLE CHANNEL APPLICATIONS - PERFORMANCE SPECIFICATION TEMPLATE
    BS EN 61290-5-2:2004 Optical fibre amplifiers. Basic specification. Test methods for reflectance parameters Electrical spectrum analyser method
    I.S. EN 61290-11-2:2005 OPTICAL AMPLIFIERS - TEST METHODS - PART 11-2: POLARIZATION MODE DISPERSION PARAMETER - POINCARE SPHERE ANALYSIS METHOD
    PD IEC/TR 61292-6:2010 Optical amplifiers Distributed Raman amplification
    BS EN 61290-5-3:2002 Optical fibre amplifiers. Basic specification. Test methods for reflectance parameters Reflectance tolerance using an electrical spectrum analyser
    07/30163795 DC : 0 BS EN 61290-11-1 - OPTICAL AMPLIFIERS. TEST METHODS - PART 11-1: POLARIZATION MODE DISPERSION - JONES MATRIX EIGENANALYSIS (JME)
    BS EN 61290-5-1:2006 Optical amplifiers. Test methods Reflectance parameters. Optical spectrum analyzer method
    17/30363220 DC : 0 BS EN 61290-4-3 ED.2.0 - OPTICAL AMPLIFIERS - TEST METHODS - PART 4-3: POWER TRANSIENT PARAMETERS - SINGLE CHANNEL OPTICAL AMPLIFIERS IN OUTPUT POWER CONTROL
    BS EN 61291-2:2016 Optical amplifiers Single channel applications. Performance specification template
    BS EN 61290-7-1:2007 Optical amplifiers. Test methods Out-of-band insertion losses. Filtered optical power meter method
    I.S. EN 61290-3-3:2014 OPTICAL AMPLIFIERS - TEST METHODS - PART 3-3: NOISE FIGURE PARAMETERS - SIGNAL POWER TO TOTAL ASE POWER RATIO
    98/260896 DC : DRAFT MAR 1998 IEC 61291-3 ED. 1 - PERFORMANCE SPECIFICATION TEMPLATE ON OPTICAL AMPLIFIERS - PART 3: OPTICAL FIBRE AMPLIFIERS FOR ANALOGUE APPLICATIONS
    BS EN 61290-4-1:2016 Optical amplifiers. Test methods Gain transient parameters. Two-wavelength method
    BS EN 61290-10-2:2008 Optical amplifiers. Test methods Multichannel parameters. Pulse method using a gated optical spectrum analyzer
    BS EN 61290-1-2:2005 Optical amplifiers. Test methods Power and gain parameters - Electrical spectrum analyzer method
    05/30134985 DC : DRAFT JUN 2005 IEC 61290-1-1 ED 2 - OPTICAL AMPLIFIER TEST METHODS - PART 1-1: OPTICAL POWER AND GAIN PARAMETERS - OPTICAL SPECTRUM ANALYZER METHOD
    98/261559 DC : DRAFT MAY 1998 IEC 61290-3 EDITION 1 - BASIC SPECIFICATION FOR OPTICAL FIBRE AMPLIFIER TEST METHODS - PART 3-1: TEST METHODS FOR NOISE FIGURE PARAMETERS - OPTICAL SPECTRUM ANALYZER TEST METHOD
    06/30154851 DC : DRAFT AUG 2006 EN 61290-7-1 - OPTICAL AMPLIFIERS - TEST METHODS - PART 7-1: OUT-OF-BAND INSERTION LOSSES - FILTERED OPTICAL POWER METER METHOD
    CEI EN 61290-1-2 : 2006 OPTICAL AMPLIFIERS - TEST METHODS - PART 1-2: POWER AND GAIN PARAMETERS - ELECTRICAL SPECTRUM ANALYZER METHOD
    NF EN 61290-4-2 : 2011 OPTICAL AMPLIFIERS - TEST METHODS - PART 4-2: GAIN TRANSIENT PARAMETERS - BROADBAND SOURCE METHOD
    I.S. EN 61291-4:2012 OPTICAL AMPLIFIERS - PART 4: MULTICHANNEL APPLICATIONS - PERFORMANCE SPECIFICATION TEMPLATE (IEC 61291-4:2011 (EQV))
    I.S. EN 61290-1-1:2015 OPTICAL AMPLIFIERS - TEST METHODS - PART 1-1: POWER AND GAIN PARAMETERS - OPTICAL SPECTRUM ANALYZER METHOD
    IEC 61291-5-2:2017 Optical amplifiers - Part 5-2: Qualification specifications - Reliability qualification for optical fibre amplifiers
    CEI EN 61290-3-2 : 2010 OPTICAL AMPLIFIERS - TEST METHODS - PART 3-2: NOISE FIGURE PARAMETERS - ELECTRICAL SPECTRUM ANALYZER METHOD
    I.S. EN 61290-10-1:2009 OPTICAL AMPLIFIERS - TEST METHODS - PART 10-1: MULTICHANNEL PARAMETERS - PULSE METHOD USING AN OPTICAL SWITCH AND OPTICAL SPECTRUM ANALYZER
    CEI EN 60728-6 : 2012 CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 6: OPTICAL EQUIPMENT
    I.S. EN 61291-2:2016 OPTICAL AMPLIFIERS - PART 2: SINGLE CHANNEL APPLICATIONS - PERFORMANCE SPECIFICATION TEMPLATE
    I.S. EN 61290-7-1:2007 OPTICAL AMPLIFIERS - TEST METHODS - PART 7-1: OUT-OF-BAND INSERTION LOSSES - FILTERED OPTICAL POWER METER METHOD
    EN 61290-1-3:2015 Optical amplifiers - Test methods - Part 1-3: Power and gain parameters - Optical power meter method
    I.S. EN 60728-13-1:2017 CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 13-1: BANDWIDTH EXPANSION FOR BROADCAST SIGNAL OVER FTTH SYSTEM
    IEC 60728-13-1:2017 Cable networks for television signals, sound signals and interactive services - Part 13-1: Bandwidth expansion for broadcast signal over FTTH system
    BS EN 61290-10-3:2003 Optical amplifiers. Test methods Multichannel parameters. Probe methods
    BS EN 61290-10-1:2009 Optical amplifiers. Test methods Multichannel parameters. Pulse method using an optical switch and optical spectrum analyzer
    BS EN 61291-4:2012 Optical amplifiers Multichannel applications. Performance specification template
    BS EN 61290-1-1:2015 Optical amplifiers. Test methods Power and gain parameters. Optical spectrum analyzer method
    I.S. EN 61290-1-2:2006 OPTICAL AMPLIFIERS - TEST METHODS - PART 1-2: POWER AND GAIN PARAMETERS - ELECTRICAL SPECTRUM ANALYZER METHOD
    05/30134734 DC : DRAFT JUN 2005 IEC 61290-5-1 - OPTICAL AMPLIFIER TEST METHODS - PART 5-1: REFLECTANCE PARAMETERS - OPTICAL SPECTRUM ANALYZER METHOD
    02/203702 DC : DRAFT APR 2002 IEC 61292-2 TR - OPTICAL AMPLIFIERS - PART 2: THEORETICAL BACKGROUND FOR NOISE FIGURE EVALUATION USING THE ELECTRICAL SPECTRUM ANALYSER
    ISO 20780:2018 Space systems — Fiber optic components — Design and verification requirements
    EN 60728-13-1:2017 Cable networks for television signals, sound signals and interactive services - Part 13-1: Bandwidth expansion for broadcast signal over FTTH system
    BS EN 61290-4-3:2015 Optical amplifiers. Test methods Power transient parameters. Single channel optical amplifiers in output power control
    BS EN IEC 61281-1:2018 Fibre optic communication subsystems Generic specification
    CEI EN 61290-10-2 : 2010 OPTICAL AMPLIFIERS - TEST METHODS - PART 10-2: MULTICHANNEL PARAMETERS - PULSE METHOD USING A GATED OPTICAL SPECTRUM ANALYZER
    11/30241813 DC : 0 BS EN 61291-4 - OPTICAL AMPLIFIERS - PART 4: MULTICHANNEL APPLICATIONS - PERFORMANCE SPECIFICATION TEMPLATE
    03/309966 DC : DRAFT JULY 2003 IEC 61290-11-2 - OPTICAL AMPLIFIER TEST METHODS - PART 11-2: POLARISATION MODE DISPERSION - POINCARE SPHERE ANALYSIS METHOD
    CEI EN 61281-1 : 2001 FIBRE OPTIC COMMUNICATION SUBSYSTEMS - PART 1:GENERIC SPECIFICATION
    DD IEC/PAS 61290-3-1:2002 Optical fibre amplifiers. Basic specification. Test methods for noise figure parameters Optical spectrum analyzer
    15/30294923 DC : 0 BS EN 61291-5-2 ED2.0 - OPTICAL AMPLIFIERS - PART 5-2: QUALIFICATION SPECIFICATIONS - RELIABILITY QUALIFICATION FOR OPTICAL FIBRE AMPLIFIERS
    06/30156997 DC : 0 BS EN 61290-10-2 - OPTICAL AMPLIFIERS - TEST METHODS - PART 10-2: MULTICHANNEL PARAMETERS - PULSE METHOD USING A GATED OPTICAL SPECTRUM ANALYZER
    07/30163800 DC : 0 BS EN 61290-3 - OPTICAL AMPLIFIERS - TEST METHODS - PART 3: NOISE FIGURE PARAMETERS
    13/30269514 DC : 0 BS EN 61290-10-5 - OPTICAL AMPLIFIERS - TEST METHODS - PART 10-5: MULTICHANNEL PARAMETERS - DISTRIBUTED RAMAN AMPLIFIER GAIN AND NOISE FIGURE
    CEI EN 60728-13 : 2010 CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 13: OPTICAL SYSTEMS FOR BROADCAST SIGNAL TRANSMISSIONS
    BS EN 61290-6-1:1998 Optical fibre amplifiers. Basic specification Test methods for pump leakage parameters. Optical demultiplexer
    04/30110918 DC : DRAFT MAR 2004 IEC 61290-1-2 ED 2.0 - OPTICAL AMPLIFIER TEST METHODS - PART 1-2: OPTICAL POWER AND GAIN PARAMETERS - ELECTRICAL SPECTRUM ANALYZER METHOD
    IEC 61290-4-4:2018 Optical amplifiers - Test methods - Part 4-4: Gain transient parameters - Single channel optical amplifiers with gain control
    CEI EN 61290-3-3 : 2014 OPTICAL AMPLIFIERS - TEST METHODS - PART 3-3: NOISE FIGURE PARAMETERS - SIGNAL POWER TO TOTAL ASE POWER RATIO
    CEI EN 61290-5-1 : 2007 OPTICAL AMPLIFIERS - TEST METHODS - PART 5-1: REFLECTANCE PARAMETERS - OPTICAL SPECTRUM ANALYZER METHOD
    BS EN 61290-11-1:2008 Optical amplifiers. Test methods Polarization mode dispersion parameter. Jones matrix eigenanalysis (JME)
    I.S. EN 61290-10-2:2008 OPTICAL AMPLIFIERS - TEST METHODS - PART 10-2: MULTICHANNEL PARAMETERS - PULSE METHOD USING A GATED OPTICAL SPECTRUM ANALYZER
    I.S. EN 61290-1-3:2015 OPTICAL AMPLIFIERS - TEST METHODS - PART 1-3: POWER AND GAIN PARAMETERS - OPTICAL POWER METER METHOD
    IEC PAS 61290-3-1:2002 Optical fibre amplifiers - Basic specification - Part 3-1: Test methods for noise figure parameters - Optical spectrum analyzer
    IEC 61290-10-4:2007 Optical amplifiers - Test methods - Part 10-4: Multichannel parameters - Interpolated source subtraction method using an optical spectrum analyzer
    IEC 61290-3-2:2008 Optical amplifiers - Test methods - Part 3-2: Noise figure parameters - Electrical spectrum analyzer method
    IEC 61290-10-1:2009 Optical amplifiers - Test methods - Part 10-1: Multichannel parameters - Pulse method using an optical switch and optical spectrum analyzer
    EN 61290-1-1:2015 Optical amplifiers - Test methods - Part 1-1: Power and gain parameters - Optical spectrum analyzer method
    EN 61290-11-1:2008 Optical amplifiers - Test methods - Part 11-1: Polarization mode dispersion parameter - Jones matrix eigenanalysis (JME)
    CEI EN 61290-4-1 : 2012 OPTICAL AMPLIFIERS - TEST METHODS - PART 4-1: GAIN TRANSIENT PARAMETERS - TWO-WAVELENGTH METHOD
    I.S. EN 61290-4-3:2015 OPTICAL AMPLIFIERS - TEST METHODS - PART 4-3: POWER TRANSIENT PARAMETERS - SINGLE CHANNEL OPTICAL AMPLIFIERS IN OUTPUT POWER CONTROL
    CEI EN 61290-6-1 : 1999 OPTICAL FIBRE AMPLIFIERS - BASIC SPECIFICATION - TEST METHODS FOR PUMP LEAKAGE PARAMETERS - OPTICAL DEMULTIPLEXER
    EN IEC 61281-1:2018 Fibre optic communication subsystems - Part 1: Generic specification
    BS EN 60728-6:2011 Cable networks for television signals, sound signals and interactive services Optical equipment
    17/30361911 DC : DRAFT JUL 2017 BS EN 61290-4-4 - OPTICAL AMPLIFIERS - TEST METHODS - PART 4-4: GAIN TRANSIENT PARAMETERS - SINGLE CHANNEL OPTICAL AMPLIFIERS WITH GAIN CONTROL
    PD IEC TR 61292-2:2003 Optical amplifier technical reports Theoretical background for noise figure evaluation using the electrical spectrum analyzer
    BS EN 61290-4-2:2011 Optical amplifiers. Test methods Gain transient parameters. Broadband source method
    NF EN 61290-1 : 2015 OPTICAL AMPLIFIERS - TEST METHODS - PART 1: POWER AND GAIN PARAMETERS
    12/30260284 DC : 0 BS EN 61290-3-3 - OPTICAL AMPLIFIERS - TEST METHODS - PART 3-3: NOISE FIGURE PARAMETERS - SIGNAL POWER TO TOTAL ASE POWER RATIO
    11/30249637 DC : 0 BS EN 61291-2 - OPTICAL AMPLIFIERS - PART 2: DIGITAL APPLICATIONS - PERFORMANCE SPECIFICATION TEMPLATE SPECIFICATION TEMPLATE
    BS EN 61290-1:2015 Optical amplifiers. Test methods Power and gain parameters
    NF EN 61291 5-2 : 2003 OPTICAL AMPLIFIERS - PART 5-2: QUALIFICATION SPECIFICATIONS - RELIABILITY QUALIFICATION FOR OPTICAL FIBRE AMPLIFIERS
    PD IEC/TR 61292-7:2011 Optical amplifiers Four wave mixing effect in optical amplifiers
    05/30134720 DC : DRAFT JUN 2005 IEC 61290-5-1 - OPTICAL AMPLIFIER TEST METHODS - PART 5-1: REFLECTANCE PARAMETERS - OPTICAL SPECTRUM ANALYZER METHOD
    13/30284148 DC : 0 BS EN 61290-4-3 - OPTICAL AMPLIFIERS - TEST METHODS - PART 4-3: POWER TRANSIENT PARAMETERS IN SINGLE CHANNEL OPTICAL FIBRE AMPLIFIERS WITH OUTPUT POWER CONTROL
    BS EN 61290-10-4:2007 Optical amplifiers. Test methods Multichannel parameters. Interpolated source subtraction method using an optical spectrum analyzer
    CEI EN 61290-2-2 : 1999 OPTICAL FIBRE AMPLIFIERS - BASIC SPECIFICATION - PART 2-2: TEST METHODS FOR OPTICAL POWER PARAMETERS - ELECTRICAL SPECTRUM ANALYZER
    BS EN 61290-3-1:2003 Optical fibre amplifiers. Basic specification. Test methods for noise figure parameters Optical spectrum analyzer method
    NF EN 61290-3-3 : 2014 OPTICAL AMPLIFIERS - TEST METHODS - PART 3-3: NOISE FIGURE PARAMETERS - SIGNAL POWER TO TOTAL ASE POWER RATIO
    I.S. EN 60728-6:2011 CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 6: OPTICAL EQUIPMENT
    I.S. EN 61290-4-2:2011 OPTICAL AMPLIFIERS - TEST METHODS - PART 4-2: GAIN TRANSIENT PARAMETERS - BROADBAND SOURCE METHOD (IEC 61290-4-2:2011 (EQV))
    IEC 61281-1:2017 Fibre optic communication subsystems - Part 1: Generic specification
    I.S. EN 61290-3-1:2003 OPTICAL AMPLIFIERS - TEST METHODS - PART 3-1: NOISE FIGURE PARAMETERS - OPTICAL SPECTRUM ANALYZER METHOD
    CEI EN 61290-7-1 : 2008 OPTICAL AMPLIFIERS - TEST METHODS - PART 7-1: OUT-OF-BAND INSERTION LOSSES - FILTERED OPTICAL POWER METER METHOD
    I.S. EN 61291-5-2:2017 OPTICAL AMPLIFIERS - PART 5-2: QUALIFICATION SPECIFICATIONS - RELIABILITY QUALIFICATION FOR OPTICAL FIBRE AMPLIFIERS
    I.S. EN 61290-10-5:2014 OPTICAL AMPLIFIERS - TEST METHODS - PART 10-5: MULTICHANNEL PARAMETERS - DISTRIBUTED RAMAN AMPLIFIER GAIN AND NOISE FIGURE
    I.S. EN 61290-5-3:2002 OPTICAL FIBRE AMPLIFIERS - BASIC SPECIFICATION - PART 5-3: TEST METHODS FOR REFLECTANCE PARAMETERS - REFLECTANCE TOLERANCE USING AN ELECTRICAL SPECTRUM ANALYSER
    IEC 61290-2-1:1998 Optical fibre amplifiers - Basic specification - Part 2-1: Test methods for optical power parameters - Optical spectrum analyzer
    IEC 60728-13:2010 Cable networks for television signals, sound signals and interactive services - Part 13: Optical systems for broadcast signal transmissions
    IEC 61291-2:2016 Optical amplifiers - Part 2: Single channel applications - Performance specification template
    IEC 61290-11-1:2008 Optical amplifiers - Test methods - Part 11-1: Polarization mode dispersion parameter - Jones matrix eigenanalysis (JME)
    IEC 61290-2-2:1998 Optical fibre amplifiers - Basic specification - Part 2-2: Test methods for optical power parameters - Electrical spectrum analyzer
    IEC 61290-5-2:2003 Optical amplifiers - Test methods - Part 5-2: Reflectance parameters - Electrical spectrum analyser method
    IEC 61290-3-1:2003 Optical amplifiers - Test methods - Part 3-1: Noise figure parameters - Optical spectrum analyzer method
    IEC 61290-4-2:2011 Optical amplifiers - Test methods - Part 4-2: Gain transient parameters - Broadband source method
    IEC 61291-4:2011 Optical amplifiers - Part 4: Multichannel applications - Performance specification template
    IEC 60728-6:2011 Cable networks for television signals, sound signals and interactive services - Part 6: Optical equipment
    IEC 61290-1-3:2015 Optical amplifiers - Test methods - Part 1-3: Power and gain parameters - Optical power meter method
    IEC 61290-10-5:2014 Optical amplifiers - Test methods - Part 10-5: Multichannel parameters - Distributed Raman amplifier gain and noise figure
    IEC 61290-5-1:2006 Optical amplifiers - Test methods - Part 5-1: Reflectance parameters - Optical spectrum analyzer method
    IEC 61290-4-1:2016 Optical amplifiers - Test methods - Part 4-1: Gain transient parameters - Two-wavelength method
    IEC 61290-3-3:2013 Optical amplifiers - Test methods - Part 3-3: Noise figure parameters - Signal power to total ASE power ratio
    IEC 61290-10-2:2007 Optical amplifiers - Test methods - Part 10-2: Multichannel parameters - Pulse method using a gated optical spectrum analyzer
    IEC 61290-11-2:2005 Optical amplifiers - Test methods - Part 11-2: Polarization mode dispersion parameter - Poincaré sphere analysis method
    IEC 61290-3:2008 Optical amplifiers - Test methods - Part 3: Noise figure parameters
    IEC 61290-7-1:2007 Optical amplifiers - Test methods - Part 7-1: Out-of-band insertion losses - Filtered optical power meter method
    IEC 61290-1-2:2005 Optical amplifiers - Test methods - Part 1-2: Power and gain parameters - Electrical spectrum analyzer method
    I.S. EN IEC 61281-1:2018 FIBRE OPTIC COMMUNICATION SUBSYSTEMS - PART 1: GENERIC SPECIFICATION
    BS EN 61290-11-2:2005 Optical amplifiers. Test methods Polarization mode dispersion parameter - Poincaré sphere analysis method
    I.S. EN 60728-13:2010 CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 13: OPTICAL SYSTEMS FOR BROADCAST SIGNAL TRANSMISSIONS
    BS EN 61290-1-3:2015 Optical amplifiers. Test methods Power and gain parameters. Optical power meter method
    BS EN 60728-13-1:2017 Cable networks for television signals, sound signals and interactive services Bandwidth expansion for broadcast signal over FTTH system
    IEC TR 61292-6:2010 Optical amplifiers - Part 6: Distributed Raman amplification
    14/30296100 DC : 0 BS EN 61290-1-3 - OPTICAL AMPLIFIERS - TEST METHODS - PART 1-3: OPTICAL POWER AND GAIN PARAMETERS - OPTICAL POWER METER METHOD
    CEI EN 61290-10-1 : 2010 OPTICAL AMPLIFIERS - TEST METHODS - PART 10-1: MULTICHANNEL PARAMETERS - PULSE METHOD USING AN OPTICAL SWITCH AND OPTICAL SPECTRUM ANALYZER
    08/30185648 DC : 0 BS EN 60728-13 - CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 13: OPTICAL SYSTEMS FOR BROADCAST SIGNAL TRANSMISSIONS
    15/30318626 DC : 0 BS EN 61290-4-1 ED. 2.0 - OPTICAL AMPLIFIERS - TEST METHODS - PART 4-1: GAIN TRANSIENT PARAMETERS - TWO-WAVELENGTH METHOD
    I.S. EN 61290-5-1:2006 OPTICAL AMPLIFIERS - TEST METHODS - PART 5-1: REFLECTANCE PARAMETERS - OPTICAL SPECTRUM ANALYZER METHOD
    CEI EN 61290-11-1 : 2010 OPTICAL AMPLIFIERS - TEST METHODS - PART 11-1: POLARIZATION MODE DISPERSION PARAMETER - JONES MATRIX EIGENANALYSIS (JME)
    BS EN 61290-3:2008 Optical amplifiers. Test methods Noise figure parameters
    IEC TR 61282-1:2000 Fibre optic communication system design guides - Part 1: Single-mode digital and analogue systems
    98/263682 DC : DRAFT SEP 1998 PREN 50309 - OPTICAL FIBRE AMPLIFIER RELIABILITY STANDARD
    CEI EN 61290-3 : 2010 OPTICAL AMPLIFIERS - TEST METHODS - PART 3: NOISE FIGURE PARAMETERS
    I.S. EN 61290-4-1:2016 OPTICAL AMPLIFIERS - TEST METHODS - PART 4-1: GAIN TRANSIENT PARAMETERS - TWO-WAVELENGTH METHOD
    I.S. EN 61290-11-1:2008 OPTICAL AMPLIFIERS - TEST METHODS - PART 11-1: POLARIZATION MODE DISPERSION PARAMETER - JONES MATRIX EIGENANALYSIS (JME)
    I.S. EN 61290-1:2015 OPTICAL AMPLIFIERS - TEST METHODS - PART 1: POWER AND GAINPARAMETERS
    CEI EN 61290-4-2 : 2012 OPTICAL AMPLIFIERS - TEST METHODS - PART 4-2: GAIN TRANSIENT PARAMETERS - BROADBAND SOURCE METHOD
    CEI EN 61290-2-3 : 1999 OPTICAL FIBRE AMPLIFIERS - BASIC SPECIFICATION - PARTS 2-3: TEST METHODS FOR OPTICAL POWER PARAMETERS - OPTICAL POWER METER
    I.S. EN 61290-10-3:2003 OPTICAL AMPLIFIERS - TEST METHODS - PART 10-3: MULTICHANNEL PARAMETERS - PROBE METHODS
    IEC TR 61292-7:2011 Optical amplifiers - Part 7: Four wave mixing effect in optical amplifiers
    IEC TR 61292-2:2003 Optical amplifier technical reports - Part 2: Theoretical background for noise figure evaluation using the electrical spectrum analyzer
    I.S. EN 61290-10-4:2007 OPTICAL AMPLIFIERS - TEST METHODS - PART 10-4: MULTICHANNEL PARAMETERS - INTERPOLATED SOURCE SUBTRACTION METHOD USING AN OPTICAL SPECTRUM ANALYZER
    EN 61290-4-1:2016 Optical amplifiers - Test methods - Part 4-1: Gain transient parameters - Two-wavelength method
    IEC 61290-6-1:1998 Optical fibre amplifiers - Basic specification - Part 6-1: Test methods for pump leakage parameters - Optical demultiplexer
    IEC 61290-1:2014 Optical amplifiers - Test methods - Part 1: Power and gain parameters
    IEC 61290-1-1:2015 Optical amplifiers - Test methods - Part 1-1: Power and gain parameters - Optical spectrum analyzer method
    IEC 61290-2-3:1998 Optical fibre amplifiers - Basic specification - Part 2-3: Test methods for optical power parameters - Optical power meter
    IEC 61290-10-3:2002 Optical amplifiers - Test methods - Part 10-3: Multichannel parameters - Probe methods
    IEC 61290-5-3:2002 Basic specification for optical amplifier test methods - Part 5-3: Test methods for reflectance parameters - Reflectance tolerance test method using electrical spectrum analyzer
    EN 61290-10-5:2014 Optical amplifiers - Test methods - Part 10-5: Multichannel parameters - Distributed Raman amplifier gain and noise figure
    EN 61290-10-3:2003 Optical amplifiers - Test methods - Part 10-3: Multichannel parameters - Probe methods
    EN 61290-10-1:2009 Optical amplifiers - Test methods - Part 10-1: Multichannel parameters - Pulse method using an optical switch and optical spectrum analyzer
    EN 61290-3-1:2003 Optical amplifiers - Test methods - Part 3-1: Noise figure parameters - Optical spectrum analyzer method
    EN 61290-4-2:2011 Optical amplifiers - Test methods - Part 4-2: Gain transient parameters - Broadband source method
    EN 61290-6-1:1998 Optical fibre amplifiers - Basic specification - Part 6-1: Test methods for pump leakage parameters - Optical demultiplexer
    EN 61290-3-3:2014 Optical amplifiers - Test methods - Part 3-3: Noise figure parameters - Signal power to total ASE power ratio
    EN 61290-1-2:2005 Optical amplifiers - Test methods - Part 1-2: Power and gain parameters - Electrical spectrum analyzer method
    EN 61290-3-2:2008 Optical amplifiers - Test methods - Part 3-2: Noise figure parameters - Electrical spectrum analyzer method
    EN 60728-6:2011 Cable networks for television signals, sound signals and interactive services - Part 6: Optical equipment
    EN 61290-3:2008 Optical amplifiers - Test methods - Part 3: Noise figure parameters
    EN 61290-11-2:2005 Optical amplifiers - Test methods - Part 11-2: Polarization mode dispersion parameter - Poincaré sphere analysis method
    EN 61290-2-3 : 1998 OPTICAL FIBRE AMPLIFIERS - BASIC SPECIFICATION - TEST METHODS FOR OPTICAL POWER PARAMETERS - OPTICAL POWER METER
    EN 61290-10-4:2007 Optical amplifiers - Test methods - Part 10-4: Multichannel parameters - Interpolated source subtraction method using an optical spectrum analyzer
    EN 61290-5-1 : 2006 Optical amplifiers - Test methods - Part 5-1: Reflectance parameters - Optical spectrum analyzer method
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective