• IEC 61496-3:2008

    Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

    Safety of machinery - Electro-sensitive protective equipment - Part 3: Particular requirements for Active Opto-electronic Protective Devices responsive to Diffuse Reflection (AOPDDR)

    Available format(s):  Hardcopy, PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

    Superseded date:  15-12-2018

    Language(s):  English - French

    Published date:  13-02-2008

    Publisher:  International Electrotechnical Committee

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    FOREWORD
    INTRODUCTION
    1 Scope
    2 Normative references
    3 Terms and definitions
    4 Requirements
      4.1 Functional requirements
      4.2 Design requirements
      4.3 Environmental requirements
    5 Testing
      5.1 General
      5.2 Functional tests
      5.3 Performance testing under fault conditions
      5.4 Environmental tests
    6 Marking for identification and for safe use
      6.1 General
    7 Accompanying documents
    Annex A (normative) Optional functions of the ESPE
    Annex B (normative) Catalogue of single faults affecting the
            electrical equipment of the ESPE, to be applied as
            specified in 5.3
    Annex AA (informative) Examples of the use of an AOPDDR
             in different applications
    Annex BB (informative) Relationship between ranging accuracy
             and probability of detection
    Bibliography

    Abstract - (Show below) - (Hide below)

    It specifies additional requirements for the design, construction and testing of non-contact electro-sensitive protective equipment (ESPE) designed specifically to detect persons as part of a safety related system, employing active opto-electronic protective devices responsive to diffuse reflection (AOPDDRs) for the sensing function. Special attention is directed to requirements which ensure that an appropriate safety-related performance is achieved. An ESPE may include optional safety-related functions, the requirements for which are given both in Annex A of this part and in Annex A of IEC 61496-1. The important changes and improvements compared to the first edition of this part of the standard are:
    - extension of the range of detection capability covered by this part of the standard from 50 mm to 100 mm to the range of 30 mm to 200 mm;
    - clarification of requirements for the selection of multiple detection zones (Clause A.10);
    - more detailed information about the use of an AOPDDR as a whole body trip device by extension of Clause A.12 and a new Clause A.13;
    - improved description of the relationship between ranging accuracy and probability of detection (Annex BB).

    General Product Information - (Show below) - (Hide below)

    Committee TC 44
    Development Note To be used in conjunction with IEC 61496-1. (02/2008) Stability Date: 2017. (09/2017)
    Document Type Standard
    Publisher International Electrotechnical Committee
    Status Superseded
    Superseded By
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    ISO 19085-1:2017 Woodworking machines Safety Part 1: Common requirements
    UNE-EN 60947-5-3:2014 Low-voltage switchgear and controlgear - Part 5-3: Control circuit devices and switching elements - Requirements for proximity devices with defined behaviour under fault conditions (PDDB)
    I.S. EN 16252:2012 MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - HORIZONTAL BALING PRESSES - SAFETY REQUIREMENTS
    14/30265058 DC : 0 BS EN ISO 13850 - SAFETY OF MACHINERY - EMERGENCY STOP FUNCTION - PRINCIPLES FOR DESIGN
    CEI CLC/TS 62046 : 2011 SAFETY OF MACHINERY - APPLICATION OF PROTECTIVE EQUIPMENT TO DETECT THE PRESENCE OF PERSONS
    BS EN 691-1 : 2012 SAFETY OF WOODWORKING MACHINES - PART 1: COMMON REQUIREMENTS
    DIN EN 16474 E : 2015 PLASTICS AND RUBBER MACHINES - TYRE CURING PRESSES - SAFETY REQUIREMENTS
    ISO 16092-1:2017 Machine tools safety Presses Part 1: General safety requirements
    UNI EN 16005 : 2012 POWER OPERATED PEDESTRIAN DOORSETS - SAFETY IN USE - REQUIREMENTS AND TEST METHODS
    UNI EN 691-1 : 2012 SAFETY OF WOODWORKING MACHINES - PART 1: COMMON REQUIREMENTS
    BS EN ISO 10218-2:2011 (published 2011-07) Robots and robotic devices. Safety requirements for industrial robots Robot systems and integration
    CLC/TS 62046:2008 SAFETY OF MACHINERY - APPLICATION OF PROTECTIVE EQUIPMENT TO DETECT THE PRESENCE OF PERSONS
    12/30244783 DC : 0 BS EN ISO 13856-3 - SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 3: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE-SENSITIVE BUMPERS, PLATES, WIRES AND SIMILAR DEVICES
    UNI EN ISO 13856-2 : 2013 SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 2: GENERAL PRINCIPLES FOR DESIGN AND TESTING OF PRESSURE-SENSITIVE EDGES AND PRESSURE-SENSITIVE BARS
    UNI EN 415-8 : 2008 SAFETY OF PACKAGING MACHINES - PART 8: STRAPPING MACHINES
    DIN EN 16252:2013-03 Machines for compacting waste materials or recyclable fractions - Horizontal baling presses - Safety requirements
    14/30296658 DC : 0 BS IEC 62046 ED1.0 - SAFETY OF MACHINERY - APPLICATION OF PROTECTIVE EQUIPMENT TO DETECT THE PRESENCE OF PERSONS
    11/30247811 DC : 0 BS EN 415-10 - SAFETY OF PACKAGING MACHINES - PART 10: GENERAL REQUIREMENTS
    10/30179839 DC : 0 BS EN 1010-5:2005/A1 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 5: MACHINES FOR THE PRODUCTION OF CORRUGATED BOARD AND MACHINES FOR THE CONVERSION OF FLAT AND CORRUGATED BOARD
    DIN EN 691-1:2013-01 SAFETY OF WOODWORKING MACHINES - PART 1: COMMON REQUIREMENTS
    IEC 62046:2018 Safety of machinery - Application of protective equipment to detect the presence of persons
    UNI EN 16500 : 2014 MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - VERTICAL BALING PRESSES - SAFETY REQUIREMENTS
    I.S. EN ISO 16090-1:2018 MACHINE TOOLS SAFETY - MACHINING CENTRES, MILLING MACHINES, TRANSFER MACHINES - PART 1: SAFETY REQUIREMENTS (ISO 16090-1:2017)
    07/30166811 DC : 0 BS EN ISO 23125 - SAFETY OF MACHINE TOOLS - TURNING MACHINES
    DIN EN 16486 E : 2014 MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - COMPACTORS - SAFETY REQUIREMENTS
    BS EN 61131-6 : 2012 PROGRAMMABLE CONTROLLERS - PART 6: FUNCTIONAL SAFETY
    CEI EN 61131-6 : 2013 PROGRAMMABLE CONTROLLERS - PART 6: FUNCTIONAL SAFETY
    11/30239643 DC : 0 BS EN ISO 13856-2 - SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 2: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE-SENSITIVE EDGES AND PRESSURE-SENSITIVE BARS
    I.S. EN ISO 16092-1:2018 MACHINE TOOLS SAFETY - PRESSES - PART 1: GENERAL SAFETY REQUIREMENTS (ISO 16092-1:2017)
    DIN EN 16005:2013-01 Power operated pedestrian doorsets - Safety in use - Requirements and test methods
    CSA Z432 : 2016 SAFEGUARDING OF MACHINERY
    12/30257838 DC : 0 BS EN 62046 - SAFETY OF MACHINERY - APPLICATION OF PROTECTIVE EQUIPMENT TO DETECT THE PRESENCE OF PERSONS
    14/30303313 DC : 0 PD 5304 - GUIDANCE ON SAFE USE OF MACHINERY
    06/30155798 DC : DRAFT SEP 2006 BS EN 62046 - SAFETY OF MACHINERY - APPLICATION OF PROTECTIVE EQUIPMENT TO DETECT THE PRESENCE OF PERSONS
    UTEC 79 160 : 2008 SAFETY OF MACHINERY - APPLICATION OF PROTECTIVE EQUIPMENT TO DETECT THE PRESENCE OF PERSONS
    14/30285733 DC : 0 BS EN ISO 16092-1 - MACHINE TOOLS SAFETY - PRESSES - PART 1: GENERAL SAFETY REQUIREMENTS
    BS EN 16500 : 2014 MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - VERTICAL BALING PRESSES - SAFETY REQUIREMENTS
    BS EN 60947-5-3:2013 (published 2013-12) Low-voltage switchgear and controlgear Control circuit devices and switching elements. Requirements for proximity devices with defined behaviour under fault conditions (PDDB)
    BS EN 16474:2015 (published 2015-04) Plastics and rubber machines. Tyre curing machines. Safety requirements
    BS EN 415-10 : 2014 SAFETY OF PACKAGING MACHINES - PART 10: GENERAL REQUIREMENTS
    17/30317170 DC : 0 BS EN ISO 20430 - PLASTICS AND RUBBER MACHINES - INJECTION MOULDING MACHINES - SAFETY REQUIREMENTS
    BS EN 415-8:2008 (published 2008-07) Safety of packaging machines Strapping machines
    DD CLC/TS 62046 : 2008 SAFETY OF MACHINERY - APPLICATION OF PROTECTIVE EQUIPMENT TO DETECT THE PRESENCE OF PERSONS
    14/30293310 DC : 0 BS EN ISO 19085-1 - WOODWORKING MACHINES - SAFETY - PART 1: COMMON REQUIREMENTS
    12/30255086 DC : 0 BS EN 289 - PLASTICS AND RUBBER MACHINES - COMPRESSION MOULDING MACHINES AND TRANSFER MOULDING MACHINES - SAFETY REQUIREMENTS
    UNE-EN 691-1:2013 Safety of woodworking machines - Part 1: Common requirements
    BS EN ISO 13855:2010 Safety of machinery. Positioning of safeguards with respect to the approach speeds of parts of the human body
    NBR 13536 : 2016 SAFETY OF MACHINERY - PLASTICS AND RUBBER INJECTION MOULDING MACHINES
    CEI EN 60947-5-3 : 2014 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-3: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - REQUIREMENTS FOR PROXIMITY DEVICES WITH DEFINED BEHAVIOUR UNDER FAULT CONDITIONS (PDDB)
    I.S. EN 16474:2015 PLASTICS AND RUBBER MACHINES - TYRE CURING MACHINES - SAFETY REQUIREMENTS
    BS EN 16252 : 2012 MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - HORIZONTAL BALING PRESSES - SAFETY REQUIREMENTS
    DIN EN 415-8:2011-06 SAFETY OF PACKAGING MACHINES - PART 8: STRAPPING MACHINES
    12/30255089 DC : 0 BS EN 16474 - PLASTICS AND RUBBER MACHINES - TYRE CURING PRESSES - SAFETY REQUIREMENTS
    14/30297793 DC : 0 BS EN ISO 19085-3 - WOODWORKING MACHINES - SAFETY REQUIREMENTS - PART 3: NC BORING AND ROUTING MACHINES
    I.S. CLC TS 62046:2005 SAFETY OF MACHINERY- APPLICATION OF PROTECTIVE EQUIPMENT TO DETECT THE PRESENCE OF PERSONS
    I.S. EN 16005:2012 POWER OPERATED PEDESTRIAN DOORSETS - SAFETY IN USE - REQUIREMENTS AND TEST METHODS
    BS EN ISO 13856-2:2013 Safety of machinery. Pressure-sensitive protective devices General principles for design and testing of pressure-sensitive edges and pressure-sensitive bars
    UNE-EN ISO 13855:2011 Safety of machinery - Positioning of safeguards with respect to the approach speeds of parts of the human body (ISO 13855:2010)
    BS EN ISO 19085-1:2017 WOODWORKING MACHINES - SAFETY - PART 1: COMMON REQUIREMENTS (ISO 19085-1:2017)
    17/30356573 DC : 0 BS IEC 62046 ED1.0 - SAFETY OF MACHINERY - APPLICATION OF PROTECTIVE EQUIPMENT TO DETECT THE PRESENCE OF PERSONS
    14/30304361 DC : 0 BS EN ISO 11111-1 - TEXTILE MACHINERY - SAFETY REQUIREMENTS - PART 1: COMMON REQUIREMENTS
    UNI EN ISO 13855 : 2010 SAFETY OF MACHINERY - POSITIONING OF SAFEGUARDS WITH RESPECT TO THE APPROACH SPEEDS OF PARTS OF THE HUMAN BODY
    DIN EN ISO 10218-2:2012-06 Robots and robotic devices - Safety requirements for industrial robots - Part 2: Robot systems and integration (ISO 10218-2:2011)
    UNE-EN 16474:2015 Plastics and rubber machines - Tyre curing machines - Safety requirements
    NF EN 16500 : 2014 MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - VERTICAL BALING PRESSES - SAFETY REQUIREMENTS
    12/30270038 DC : 0 BS EN 16500 - MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - VERTICAL BALING PRESSES - SAFETY REQUIREMENTS
    BS ISO 12643-5 : 2010 GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 5: STAND-ALONE PLATEN PRESSES
    IEC 60335-2-103:2015+AMD1:2017 CSV Household and similar electrical appliances - Safety - Part 2-103: Particular requirements for drives for gates, doors and windows
    BS EN 16486 : 2014 MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - COMPACTORS - SAFETY REQUIREMENTS
    DIN EN ISO 13855:2010-10 Safety of machinery - Positioning of safeguards with respect to the approach speeds of parts of the human body (ISO 13855:2010)
    BS EN ISO 23125 : 2015 MACHINE TOOLS - SAFETY - TURNING MACHINES (ISO 23125:2015)
    DIN EN 16500:2014-10 MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - VERTICAL BALING PRESSES - SAFETY REQUIREMENTS
    DIN EN 16474:2015-08 PLASTICS AND RUBBER MACHINES - TYRE CURING PRESSES - SAFETY REQUIREMENTS
    UNE-EN ISO 13856-2:2013 Safety of machinery - Pressure-sensitive protective devices - Part 2: General principles for design and testing of pressure-sensitive edges and pressure-sensitive bars (ISO 13856-2:2013)
    BS PD 5304(2000) : 2000 SAFE USE OF MACHINERY
    04/30086349 DC : DRAFT APR 2004 EN ISO 13849-1 - SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN
    I.S. EN 16486:2014 MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - COMPACTORS - SAFETY REQUIREMENTS
    DIN EN 16500 E : 2014 MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - VERTICAL BALING PRESSES - SAFETY REQUIREMENTS
    DIN EN 415-10:2014-07 SAFETY OF PACKAGING MACHINES - PART 10: GENERAL REQUIREMENTS
    ISO 16090-1:2017 Machine tools safety Machining centres, Milling machines, Transfer machines Part 1: Safety requirements
    CSA Z460 : 2013 CONTROL OF HAZARDOUS ENERGY - LOCKOUT AND OTHER METHODS
    EN 16252 : 2012 MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - HORIZONTAL BALING PRESSES - SAFETY REQUIREMENTS
    UNI EN 16252 : 2013 MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - HORIZONTAL BALING PRESSES - SAFETY REQUIREMENTS
    UNI EN 16486 : 2014 MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - COMPACTORS - SAFETY REQUIREMENTS
    DIN EN 16486:2014-10 MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - COMPACTORS - SAFETY REQUIREMENTS
    UNE-EN 16252:2013 Machines for compacting waste materials or recyclable fractions - Horizontal baling presses - Safety requirements
    PREN ISO 13856-2 : DRAFT 2011 SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 2: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURESENSITIVE EDGES AND PRESSURE-SENSITIVE BARS (ISO/DIS 13856-2:2011)
    I.S. EN 415-10:2014 SAFETY OF PACKAGING MACHINES - PART 10: GENERAL REQUIREMENTS
    BS EN 16005 : 2012 POWER OPERATED PEDESTRIAN DOORSETS - SAFETY IN USE - REQUIREMENTS AND TEST METHODS
    I.S. EN 61131-6:2012 PROGRAMMABLE CONTROLLERS - PART 6: FUNCTIONAL SAFETY (IEC 61131-6:2012 (EQV))
    S.R. CLC/TS 62046:2008 SAFETY OF MACHINERY - APPLICATION OF PROTECTIVE EQUIPMENT TO DETECT THE PRESENCE OF PERSONS
    I.S. EN 60947-5-3:2013 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-3: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - REQUIREMENTS FOR PROXIMITY DEVICES WITH DEFINED BEHAVIOUR UNDER FAULT CONDITIONS (PDDB)
    UNI EN ISO 10218-2 : 2011 ROBOTS AND ROBOTIC DEVICES - SAFETY REQUIREMENTS FOR INDUSTRIAL ROBOTS - PART 2: ROBOT SYSTEMS AND INTEGRATION
    I.S. EN 12453:2017 INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - SAFETY IN USE OF POWER OPERATED DOORS - REQUIREMENTS AND TEST METHODS
    I.S. EN 16500:2014 MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - VERTICAL BALING PRESSES - SAFETY REQUIREMENTS
    I.S. EN ISO 19085-1:2017 WOODWORKING MACHINES - SAFETY - PART 1: COMMON REQUIREMENTS (ISO 19085-1:2017)
    I.S. EN 415-8:2008 SAFETY OF PACKAGING MACHINES - PART 8: STRAPPING MACHINES
    BIS IS/ISO 12643-5 : 2010 GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 5: STAND-ALONE PLATEN PRESSES
    UNE-EN ISO 10218-2:2011 Robots and robotic devices - Safety requirements for industrial robots - Part 2: Robot systems and integration (ISO 10218-2:2011)
    I.S. EN ISO 13856-2:2013 SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 2: GENERAL PRINCIPLES FOR DESIGN AND TESTING OF PRESSURE-SENSITIVE EDGES AND PRESSURE-SENSITIVE BARS (ISO 13856-2:2013)
    EN ISO 16090-1 : 2018 MACHINE TOOLS SAFETY - MACHINING CENTRES, MILLING MACHINES, TRANSFER MACHINES - PART 1: SAFETY REQUIREMENTS (ISO 16090-1:2017)
    I.S. EN 691-1:2012 SAFETY OF WOODWORKING MACHINES - PART 1: COMMON REQUIREMENTS
    UNE-EN 16500:2015 Machines for compacting waste materials or recyclable fractions - Vertical baling presses - Safety requirements
    UNE-EN ISO 19085-1:2018 Woodworking machines - Safety - Part 1: Common requirements (ISO 19085-1:2017)
    16/30314039 DC : 0 BS EN 12301 - PLASTICS AND RUBBER MACHINES - CALENDERS - SAFETY REQUIREMENTS
    17/30362673 DC : 0 BS EN 12978 - INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - SAFETY DEVICES FOR POWER OPERATED DOORS AND GATES - REQUIREMENTS AND TEST METHODS
    UNE-EN ISO 23125:2015 Machine tools - Safety - Turning machines (ISO 23125:2015, Corrected version 2016-03-15)
    PREN 12978 : DRAFT 2017 INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - SAFETY DEVICES FOR POWER OPERATED DOORS AND GATES - REQUIREMENTS AND TEST METHODS
    I.S. EN ISO 13855:2010 SAFETY OF MACHINERY - POSITIONING OF SAFEGUARDS WITH RESPECT TO THE APPROACH SPEEDS OF PARTS OF THE HUMAN BODY
    I.S. EN ISO 23125:2015 MACHINE TOOLS - SAFETY - TURNING MACHINES (ISO 23125:2015)
    PREN 12301 : DRAFT 2015 PLASTICS AND RUBBER MACHINES - CALENDERS - SAFETY REQUIREMENTS
    EN ISO 19085-1:2017/AC:2018 WOODWORKING MACHINES - SAFETY - PART 1: COMMON REQUIREMENTS (ISO 19085-1:2017)
    PREN 289 : DRAFT 2012 PLASTICS AND RUBBER MACHINES - COMPRESSION MOULDING MACHINES AND TRANSFER MOULDING MACHINES - SAFETY REQUIREMENTS
    EN 12453 : 2017 COR 2017 INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - SAFETY IN USE OF POWER OPERATED DOORS - REQUIREMENTS AND TEST METHODS
    UNI EN 528 : 2009 RAIL DEPENDENT STORAGE AND RETRIEVAL EQUIPMENT - SAFETY REQUIREMENTS
    CSA Z434 : 2014 INDUSTRIAL ROBOTS AND ROBOT SYSTEMS
    DIN EN ISO 13856-2:2013-08 SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 2: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE-SENSITIVE EDGES AND PRESSURE-SENSITIVE BARS (ISO 13856-2:2013)
    UNI EN 415-10 : 2014 SAFETY OF PACKAGING MACHINES - PART 10: GENERAL REQUIREMENTS
    I.S. EN ISO 10218-2:2011 ROBOTS AND ROBOTIC DEVICES - SAFETY REQUIREMENTS FOR INDUSTRIAL ROBOTS - PART 2: ROBOT SYSTEMS AND INTEGRATION
    ISO 12643-5:2010 Graphic technology Safety requirements for graphic technology equipment and systems Part 5: Stand-alone platen presses
    ISO/TR 18569:2004 Safety of machinery Guidelines for the understanding and use of safety of machinery standards
    IEC TS 60204-34:2016 Safety of machinery - Electrical equipment of machines - Part 34: Requirements for machine tools
    IEC TS 62046:2008 Safety of machinery - Application of protective equipment to detect the presence of persons
    DIN EN 415-7:2009-12 Safety of packaging machines - Part 7: Group and secondary packaging machines (includes Amendment A1:2008)
    DIN EN 415-5:2010-04 Safety of packaging machines - Part 5: Wrapping machines (includes Amendment A1:2009)
    DIN EN 13418:2013-08 PLASTICS AND RUBBER MACHINES - WINDING MACHINES FOR FILM OR SHEET - SAFETY REQUIREMENTS
    DIN EN ISO 13849-1:2016-06 Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015); German version EN ISO 13849-1:2015
    DIN EN 1760-2:2009-08 SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 2: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE EDGES AND PRESSURE SENSITIVE BARS
    DIN EN 289:2014-09 PLASTICS AND RUBBER MACHINES - COMPRESSION MOULDING MACHINES AND TRANSFER MOULDING MACHINES - SAFETY REQUIREMENTS
    DIN EN 528:2009-02 Rail dependent storage and retrieval equipment - Safety requirements
    DIN EN 201:2010-02 PLASTICS AND RUBBER MACHINES - INJECTION MOULDING MACHINES - SAFETY REQUIREMENTS
    DIN EN 422:2009-10 PLASTICS AND RUBBER MACHINES - BLOW MOULDING MACHINES - SAFETY REQUIREMENTS
    UNE-EN 289:2014 Plastics and rubber machines - Compression moulding machines and transfer moulding machines - Safety requirements
    BS PD ISO/TR 18569 : 2004 SAFETY OF MACHINERY - GUIDELINES FOR THE UNDERSTANDING AND USE OF SAFETY OF MACHINERY STANDARDS
    BS EN 415-5 : 2006 SAFETY OF PACKAGING MACHINES - PART 5: WRAPPING MACHINES
    IEC 60947-5-3:2013 Low-voltage switchgear and controlgear - Part 5-3: Control circuit devices and switching elements - Requirements for proximity devices with defined behaviour under fault conditions (PDDB)
    BS EN ISO 11111-1 : 2016 TEXTILE MACHINERY - SAFETY REQUIREMENTS - PART 1: COMMON REQUIREMENTS (ISO 11111-1:2016)
    UNE-EN 13418:2013 Plastics and rubber machines - Winding machines for film or sheet - Safety requirements
    BS EN 13418 : 2013 PLASTICS AND RUBBER MACHINES - WINDING MACHINES FOR FILM OR SHEET - SAFETY REQUIREMENTS
    BS EN 528:2008 RAIL DEPENDENT STORAGE AND RETRIEVAL EQUIPMENT - SAFETY REQUIREMENTS
    ISO 13855:2010 Safety of machinery Positioning of safeguards with respect to the approach speeds of parts of the human body
    BS EN 201 : 2009 PLASTICS AND RUBBER MACHINES - INJECTION MOULDING MACHINES - SAFETY REQUIREMENTS
    UNE-EN 16005:2013 Power operated pedestrian doorsets - Safety in use - Requirements and test methods
    IEC 61131-6:2012 Programmable controllers - Part 6: Functional safety
    BS EN 415-7 : 2006 SAFETY OF PACKAGING MACHINES - PART 7: GROUP AND SECONDARY PACKAGING MACHINES
    ISO 10218-2:2011 Robots and robotic devices Safety requirements for industrial robots Part 2: Robot systems and integration
    ISO 23125:2015 Machine tools Safety Turning machines
    ISO 13849-1:2015 Safety of machinery Safety-related parts of control systems Part 1: General principles for design
    BS EN 422 : 2009 PLASTICS AND RUBBER MACHINES - BLOW MOULDING MACHINES - SAFETY REQUIREMENTS
    ISO 11111-1:2016 Textile machinery Safety requirements Part 1: Common requirements
    BS EN 1760-2 : 2001 SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 2: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE EDGES AND PRESSURE SENSITIVE BARS
    ISO 13856-2:2013 Safety of machinery Pressure-sensitive protective devices Part 2: General principles for design and testing of pressure-sensitive edges and pressure-sensitive bars
    BS EN ISO 13849-1:2015 SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN
    UNE-EN ISO 13849-1:2016 Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015)
    UNE-EN ISO 11111-1:2016 Textile machinery - Safety requirements - Part 1: Common requirements (ISO 11111-1:2016)
    EN 16486 : 2014 MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - COMPACTORS - SAFETY REQUIREMENTS
    I.S. EN 289:2014 PLASTICS AND RUBBER MACHINES - COMPRESSION MOULDING MACHINES AND TRANSFER MOULDING MACHINES - SAFETY REQUIREMENTS
    I.S. EN 422:2009 PLASTICS AND RUBBER MACHINES - BLOW MOULDING MACHINES - SAFETY REQUIREMENTS
    I.S. EN 13418:2013 PLASTICS AND RUBBER MACHINES - WINDING MACHINES FOR FILM OR SHEET - SAFETY REQUIREMENTS
    I.S. EN ISO 11111-1:2016 TEXTILE MACHINERY - SAFETY REQUIREMENTS - PART 1: COMMON REQUIREMENTS (ISO 11111-1:2016)
    I.S. EN ISO 13849-1:2015 SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN (ISO 13849-1:2015)
    I.S. EN 201:2009 PLASTICS AND RUBBER MACHINES - INJECTION MOULDING MACHINES - SAFETY REQUIREMENTS
    I.S. EN 415-5:2006 SAFETY OF PACKAGING MACHINES - PART 5: WRAPPING MACHINES
    DIN EN 1760-2:2001-07 SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 2: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE EDGES AND PRESSURE SENSITIVE BARS
    I.S. EN 415-7:2006 SAFETY OF PACKAGING MACHINES - PART 7: GROUP AND SECONDARY PACKAGING MACHINES
    I.S. EN 528:2008 RAIL DEPENDENT STORAGE AND RETRIEVAL EQUIPMENT - SAFETY REQUIREMENTS
    EN 528:2008 RAIL DEPENDENT STORAGE AND RETRIEVAL EQUIPMENT - SAFETY REQUIREMENTS
    EN 13418:2013 PLASTICS AND RUBBER MACHINES - WINDING MACHINES FOR FILM OR SHEET - SAFETY REQUIREMENTS
    EN ISO 23125:2015 MACHINE TOOLS - SAFETY - TURNING MACHINES (ISO 23125:2015, CORRECTED VERSION 2016-03-15)
    EN 61131-6 : 2012 PROGRAMMABLE CONTROLLERS - PART 6: FUNCTIONAL SAFETY (IEC 61131-6:2012)
    NF EN 201 : 2009 PLASTICS AND RUBBER MACHINES - INJECTION MOULDING MACHINES - SAFETY REQUIREMENTS
    EN 60947-5-3:2013 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-3: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - REQUIREMENTS FOR PROXIMITY DEVICES WITH DEFINED BEHAVIOUR UNDER FAULT CONDITIONS (PDDB) (IEC 60947-5-3:2013)
    EN 691-1 : 2012 SAFETY OF WOODWORKING MACHINES - PART 1: COMMON REQUIREMENTS
    EN 415-10 : 2014 SAFETY OF PACKAGING MACHINES - PART 10: GENERAL REQUIREMENTS
    EN 201:2009 PLASTICS AND RUBBER MACHINES - INJECTION MOULDING MACHINES - SAFETY REQUIREMENTS
    EN ISO 11111-1:2016 TEXTILE MACHINERY - SAFETY REQUIREMENTS - PART 1: COMMON REQUIREMENTS (ISO 11111-1:2016)
    EN 422 : 2009 PLASTICS AND RUBBER MACHINES - BLOW MOULDING MACHINES - SAFETY REQUIREMENTS
    EN 415-7:2006+A1:2008 SAFETY OF PACKAGING MACHINES - PART 7: GROUP AND SECONDARY PACKAGING MACHINES
    EN 415-8 : 2008 SAFETY OF PACKAGING MACHINES - PART 8: STRAPPING MACHINES
    EN ISO 13856-2 : 2013 SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 2: GENERAL PRINCIPLES FOR DESIGN AND TESTING OF PRESSURE-SENSITIVE EDGES AND PRESSURE-SENSITIVE BARS (ISO 13856-2:2013)
    EN 16005:2012/AC:2015 POWER OPERATED PEDESTRIAN DOORSETS - SAFETY IN USE - REQUIREMENTS AND TEST METHODS
    EN 1760-2:2001+A1:2009 SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 2: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE EDGES AND PRESSURE SENSITIVE BARS
    EN ISO 13849-1:2015 SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN (ISO 13849-1:2015)
    EN 16500 : 2014 MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - VERTICAL BALING PRESSES - SAFETY REQUIREMENTS
    EN ISO 13855 : 2010 SAFETY OF MACHINERY - POSITIONING OF SAFEGUARDS WITH RESPECT TO THE APPROACH SPEEDS OF PARTS OF THE HUMAN BODY
    EN 16474 : 2015 PLASTICS AND RUBBER MACHINES - TYRE CURING MACHINES - SAFETY REQUIREMENTS
    EN ISO 10218-2 : 2011 ROBOTS AND ROBOTIC DEVICES - SAFETY REQUIREMENTS FOR INDUSTRIAL ROBOTS - PART 2: ROBOT SYSTEMS AND INTEGRATION
    EN 289:2014 PLASTICS AND RUBBER MACHINES - COMPRESSION MOULDING MACHINES AND TRANSFER MOULDING MACHINES - SAFETY REQUIREMENTS
    EN 415-5:2006+A1:2009 SAFETY OF PACKAGING MACHINES - PART 5: WRAPPING MACHINES

    Standards Referencing This Book - (Show below) - (Hide below)

    ISO 13855:2010 Safety of machinery Positioning of safeguards with respect to the approach speeds of parts of the human body
    EN 1525 : 1997 SAFETY OF INDUSTRIAL TRUCKS - DRIVERLESS TRUCKS AND THEIR SYSTEMS
    IEC 60825-1:2014 Safety of laser products - Part 1: Equipment classification and requirements
    ISO 14121-1:2007 Safety of machinery Risk assessment Part 1: Principles
    EN 471:2003+A1:2007 HIGH-VISIBILITY WARNING CLOTHING FOR PROFESSIONAL USE - TEST METHODS AND REQUIREMENTS
    IEC 61496-1:2012 Safety of machinery - Electro-sensitive protective equipment - Part 1: General requirements and tests
    IEC 60068-2-75:2014 Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests
    IEC 60068-2-14:2009 Environmental testing - Part 2-14: Tests - Test N: Change of temperature
    IEC TS 62046:2008 Safety of machinery - Application of protective equipment to detect the presence of persons
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective