• There are no items in your cart

IEC 61892-3:2012

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by

Mobile and fixed offshore units - Electrical installations - Part 3: Equipment

Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Superseded date

25-11-2021

Language(s)

English

Published date

15-03-2012

IEC 61892-3:2012(E) contains provisions for electrical equipment in mobile and fixed offshore units including pipeline, pumping or 'pigging' stations, compressor stations and exposed location single buoy moorings, used in the offshore petroleum industry for drilling, processing and for storage purposes. This standard applies to equipment in all installations, whether permanent, temporary, transportable or hand-held, to a.c. installations up to and including 35 000 V and d.c. installations up to and including 1 500 V (a.c. and d.c. voltages are nominal values). This standard sets requirements for equipment, which are additional to the requirements given in the product standard for the relevant equipment. This standard does not apply to the electrical installations in rooms used for medical purposes or in tankers. This edition includes the following significant technical changes with respect to the previous edition:
a) Table 4 in the previous edition of IEC 61892-3 regarding type testing has been deleted. Information regarding environmental conditions, including requirements to vibration, is now given in Clause 4;
b) for liquid immersed transformers requirement for overheating alarm and shut down has been added;
c) requirements for low voltage switchgear and controlgear have been rewritten, based on IEC 61439-1 and IEC 61439-2. Only additional requirements to those given in IEC 61439 are given in the standard;
d) requirements to low voltage circuit breakers, switches, contactors and fuses have been added;
e) requirement for subdivision of high voltage switchboard has been added;
f) requirements for luminaires have been deleted and replaced with reference to IEC 60598 series and IEC 60092-306;
g) requirements for heating and cooking appliances have been deleted and replaced with reference to IEC 60335 series;
h) requirement for portable equipment has been added.

DevelopmentNote
Stability Date: 2017. (10/2012)
DocumentType
Standard
Pages
56
PublisherName
International Electrotechnical Committee
Status
Superseded
SupersededBy
Supersedes

Standards Relationship
NEN IEC 61892-3 : 2012 Identical
BS IEC 61892-3:2012 Identical
CEI 18-58 : 2013 Identical

BS ISO 18647:2017 Petroleum and natural gas industries. Modular drilling rigs for offshore fixed platforms
BS IEC 61892-6:2013 Mobile and fixed offshore units. Electrical installations Installation
09/30200619 DC : 0 BS IEC 61892-1 - MOBILE AND FIXED OFFSHORE UNITS - ELECTRICAL INSTALLATIONS - PART 1: GENERAL REQUIREMENTS AND CONDITIONS
ISO 18647:2017 Petroleum and natural gas industries — Modular drilling rigs for offshore fixed platforms
CEI 18-63 : 2013 MOBILE AND FIXED OFFSHORE UNITS - ELECTRICAL INSTALLATIONS - PART 2: SYSTEM DESIGN
IEC 61892-5:2014 Mobile and fixed offshore units - Electrical installations - Part 5: Mobile units
IEC 61892-2:2012 Mobile and fixed offshore units - Electrical installations - Part 2: System design
12/30261012 DC : 0 BS IEC 61892-6 - MOBILE AND FIXED OFFSHORE UNITS - ELECTRICAL INSTALLATIONS - PART 6: INSTALLATION
IEC 61892-1:2015 Mobile and fixed offshore units - Electrical installations - Part 1: General requirements and conditions
IEC 61892-7:2014 Mobile and fixed offshore units - Electrical installations - Part 7: Hazardous areas
14/30293263 DC : 0 BS IEC 61892-1 ED 3.0 - MOBILE AND FIXED OFFSHORE UNITS - ELECTRICAL INSTALLATIONS - PART 1: GENERAL REQUIREMENTS AND CONDITIONS
12/30276304 DC : 0 BS EN 61892-7 ED 3.0 - MOBILE AND FIXED OFFSHORE UNITS - ELECTRICAL INSTALLATIONS - PART 7: HAZARDOUS AREAS
CEI 18-61 : 2013 MOBILE AND FIXED OFFSHORE UNITS - ELECTRICAL INSTALLATIONS - PART 1: GENERAL REQUIREMENTS AND CONDITIONS
EI Model code of safe practice Part 15:2015 MODEL CODE OF SAFE PRACTICE - PART 15: AREA CLASSIFICATION FOR INSTALLATIONS HANDLING FLAMMABLE FLUIDS
BS IEC 61892-5:2014 Mobile and fixed offshore units. Electrical installations Mobile units
BS IEC 61892-1:2015 Mobile and fixed offshore units. Electrical installations General requirements and conditions
BS IEC 61892-2:2012 Mobile and fixed offshore units. Electrical installations System design
IEC 61892-6:2013 Mobile and fixed offshore units - Electrical installations - Part 6: Installation
13/30294120 DC : 0 BS IEC 61892-5 ED 3.0 - MOBILE AND FIXED OFFSHORE UNITS - ELECTRICAL INSTALLATIONS - PART 5: MOBILE UNITS
BS IEC 61892-7:2014 Mobile and fixed offshore units. Electrical installations Hazardous areas
CEI 18-62 : 2013 MOBILE AND FIXED OFFSHORE UNITS - ELECTRICAL INSTALLATIONS - PART 5: MOBILE UNITS

IEC 60050-351:2013 International Electrotechnical Vocabulary (IEV) - Part 351: Control technology
IEC 62271-100:2008+AMD1:2012+AMD2:2017 CSV High-voltage switchgear and controlgear - Part 100: Alternating-current circuit-breakers
IEC 60076-7:2005 Power transformers - Part 7: Loading guide for oil-immersed power transformers
IEC 62271-106:2011 High-voltage switchgear and controlgear - Part 106: Alternating current contactors, contactor-based controllers and motor-starters
IEC 60146-1-3:1991 Semiconductor convertors - General requirements and line commutated convertors - Part 1-3: Transformers and reactors
IEC 62271-200:2011 High-voltage switchgear and controlgear - Part 200: AC metal-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV
IEC 61869-3:2011 Instrument transformers - Part 3: Additional requirements for inductive voltage transformers
IEC 60092-306:2009 Electrical installations in ships - Part 306: Equipment - Luminaires and lighting accessories
IEC 60896-11:2002 Stationary lead-acid batteries - Part 11: Vented types - General requirements and methods of tests
IEC 60079-30-2:2007 Explosive atmospheres - Part 30-2: Electrical resistance trace heating - Application guide for design, installation and maintenance
IEC 60309-4:2006+AMD1:2012 CSV Plugs, socket-outlets and couplers for industrial purposes - Part 4: Switched socket-outlets and connectors with or without interlock
IEC 60947-4-1:2009+AMD1:2012 CSV Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters
IEC 62271-201:2014 High-voltage switchgear and controlgear - Part 201: AC solid-insulation enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV
IEC 60364-4-41:2005+AMD1:2017 CSV Low voltage electrical installations - Part 4-41: Protection for safety - Protection against electric shock
IEC 60073:2002 Basic and safety principles for man-machine interface, marking and identification - Coding principles for indicators and actuators
IEC 61131-1:2003 Programmable controllers - Part 1: General information
IEC 60050-151:2001 International Electrotechnical Vocabulary (IEV) - Part 151: Electrical and magnetic devices
IEC TR 60616:1978 Terminal and tapping markings for power transformers
IEC TR 61131-4:2004 Programmable controllers - Part 4: User guidelines
IEC 60896-21:2004 Stationary lead-acid batteries - Part 21: Valve regulated types - Methods of test
ISO 7919-1:1996 Mechanical vibration of non-reciprocating machines Measurements on rotating shafts and evaluation criteria Part 1: General guidelines
ISO 8528-5:2013 Reciprocating internal combustion engine driven alternating current generating sets Part 5: Generating sets
IEC 61892-7:2014 Mobile and fixed offshore units - Electrical installations - Part 7: Hazardous areas
IEC 60076-5:2006 Power transformers - Part 5: Ability to withstand short circuit
IEC 60092-504:2016 Electrical installations in ships - Part 504: Automation, control and instrumentation
IEC 61869-1:2007 Instrument transformers - Part 1: General requirements
IEC 60754-1:2011 Test on gases evolved during combustion of materials from cables - Part 1: Determination of the halogen acid gas content
IEC 60598-2-5:2015 Luminaires - Part 2-5: Particular requirements - Floodlights
IEC 60269-1:2006+AMD1:2009+AMD2:2014 CSV Low-voltage fuses - Part 1: General requirements
IEC 60519-10:2013 Safety in electroheating installations - Part 10: Particular requirements for electrical resistance trace heating systems for industrial and commercial applications
IEC 60598-2-6:1994 Luminaires - Part 2: Particular requirements - Section 6: Luminaires with built-in transformers for filament lamps
IEC 60050-482:2004 International Electrotechnical Vocabulary (IEV) - Part 482: Primary and secondary cells and batteries
IEC 60282-1:2009+AMD1:2014 CSV High-voltage fuses - Part 1: Current-limiting fuses
IEC 61892-5:2014 Mobile and fixed offshore units - Electrical installations - Part 5: Mobile units
IEC 60050-426:2008 International Electrotechnical Vocabulary (IEV) - Part 426: Equipment for explosive atmospheres
IEC 60332-1-2:2004+AMD1:2015 CSV Tests on electric and optical fibre cables under fire conditions - Part 1-2: Test for vertical flame propagation for a single insulatedwire or cable - Procedure for 1 kW pre-mixed flame
IEC 60076-8:1997 Power transformers - Part 8: Application guide
IEC 60076-12:2008 Power transformers - Part 12: Loading guide for dry-type power transformers
IEC 61892-2:2012 Mobile and fixed offshore units - Electrical installations - Part 2: System design
IEC 62040-2:2016 Uninterruptible power systems (UPS) - Part 2: Electromagnetic compatibility (EMC) requirements
IEC 60447:2004 Basic and safety principles for man-machine interface, marking and identification - Actuating principles
IEC 60146-1-1:2009 Semiconductor converters - General requirements and line commutated converters - Part 1-1: Specification of basic requirements
IEC TR 60146-1-2:2011 Semiconductor converters - General requirements and line commutated converters - Part 1-2: Application guide
IEC TS 60034-25:2014 Rotating electrical machines - Part 25: AC electrical machines used in power drive systems - Application guide
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV Degrees of protection provided by enclosures (IP Code)
IEC 60044-1:1996+AMD1:2000+AMD2:2002 CSV Instrument transformers - Part 1: Current transformers
IEC TR 61641:2014 Enclosed low-voltage switchgear and controlgear assemblies - Guide for testing under conditions of arcing due to internal fault
IEC 60269-3:2010+AMD1:2013 CSV Low-voltage fuses - Part 3: Supplementary requirements for fuses foruse by unskilled persons (fuses mainly for household or similar applications) - Examples of standardized systems of fuses A to F
IEC 60896-22:2004 Stationary lead-acid batteries - Part 22: Valve regulated types - Requirements
IEC TS 60034-17:2006 Rotating electrical machines - Part 17: Cage induction motors when fed from converters - Application guide
IEC 60754-2:2011 Test on gases evolved during combustion of materials from cables - Part 2: Determination of acidity (by pH measurement) and conductivity
IEC 60076-1:2011 Power transformers - Part 1: General
IEC 61892-1:2015 Mobile and fixed offshore units - Electrical installations - Part 1: General requirements and conditions
IEC 60076-6:2007 Power transformers - Part 6: Reactors
IEC 60034-14:2003+AMD1:2007 CSV Rotating electrical machines - Part 14: Mechanical vibration of certain machines with shaft heights 56 mm and higher - Measurement, evaluation and limits of vibration severity
ISO 10816-1:1995 Mechanical vibration Evaluation of machine vibration by measurements on non-rotating parts Part 1: General guidelines
IEC 60146-2:1999 Semiconductor converters - Part 2: Self-commutated semiconductor converters including direct d.c. converters
IEC 60598-1:2014+AMD1:2017 CSV Luminaires - Part 1: General requirements and tests
IEC 62262:2002 Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code)
IEC 60533:2015 Electrical and electronic installations in ships - Electromagnetic compatibility (EMC) - Ships with a metallic hull
IEC 60034-1:2017 Rotating electrical machines - Part 1: Rating and performance
IEC 60598-2-22:2014+AMD1:2017 CSV Luminaires - Part 2-22: Particular requirements - Luminaires for emergency lighting
IEC 61892-6:2013 Mobile and fixed offshore units - Electrical installations - Part 6: Installation
IEC TS 62395-2:2008 Electrical resistance trace heating systems for industrial and commercial applications - Part 2: Application guide for system design, installation and maintenance
IEC 61131-2:2017 Industrial-process measurement and control - Programmable controllers - Part 2: Equipment requirements and tests
IEC 60050-826:2004 International Electrotechnical Vocabulary (IEV) - Part 826: Electrical installations
IEC TR 60269-5:2014 Low-voltage fuses - Part 5: Guidance for the application of low-voltage fuses
IEC 60079-30-1:2007 Explosive atmospheres - Part 30-1: Electrical resistance trace heating - General and testing requirements
IEC 60947-3:2008+AMD1:2012+AMD2:2015 CSV Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units
IEC 61439-1:2011 Low-voltage switchgear and controlgear assemblies - Part 1: General rules
IEEE 1584-2002 IEEE Guide for Performing Arc Flash Hazard Calculations
IEC 60947-2:2016 Low-voltage switchgear and controlgear - Part 2: Circuit-breakers
IEC 60598-2-2:2011 Luminaires - Part 2-2: Particular requirements - Recessed luminaires
IEC 60092-101:1994+AMD1:1995 CSV Electrical installations in ships - Part 101: Definitions and general requirements
IEC 60721-3-6:1987 Classification of environmental conditions. Part 3: Classification of groups of environmental parameters and their severities. Ship environment
IEC TR 62482:2008 Electrical installations in ships - Electromagnetic compatibility - Optimising of cable installations on ships - Testing method of routing distance
IEC 61034-2:2005+AMD1:2013 CSV Measurement of smoke density of cables burning under definedconditions - Part 2: Test procedure and requirements
ISO/IEC 6592:2000 Information technology Guidelines for the documentation of computer-based application systems
IEC 62395-1:2013 Electrical resistance trace heating systems for industrial and commercial applications - Part 1: General and testing requirements
IMO IA808 : 1997 CODE OF SAFETY FOR DIVING SYSTEMS
IEC 61378-1:2011 Converter transformers - Part 1: Transformers for industrial applications
IEC 60309-2:1999+AMD1:2005+AMD2:2012 CSV Plugs, socket-outlets and couplers for industrial purposes - Part 2: Dimensional interchangeability requirements for pin and contact-tube accessories
IEC 60282-2:2008 High-voltage fuses - Part 2: Expulsion fuses
IEC 62271-102:2001+AMD1:2011+AMD2:2013 CSV High-voltage switchgear and controlgear - Part 102: Alternatingcurrent disconnectors and earthing switches
IEC 60622:2002 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Sealed nickel-cadmium prismatic rechargeable single cells
IEC 61439-2:2011 Low-voltage switchgear and controlgear assemblies - Part 2: Power switchgear and controlgear assemblies

€311.90
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.