IEC 62002-2:2008

FOREWORD
1 Scope
2 Normative references
3 Abbreviations
4 Test conditions
   4.1 General test conditions
        4.1.1 General
        4.1.2 Temperature
        4.1.3 Voltage
   4.2 Terminal categories and summarized measurement
        conditions
   4.3 Required equipment
   4.4 Reference model and test point
   4.5 Degradation criteria and resynchronization
   4.6 Definition of C/N
   4.7 Definition of measurement signals
        4.7.1 Wanted DVB-T/H signal and interfering DVB-T
               signal definition
        4.7.2 Interfering signal definitions
5 C/N performance
   5.1 Definition and applicability
   5.2 Minimum requirements
        5.2.1 C/N performance in Gaussian channel
        5.2.2 C/N performance in portable channel
        5.2.3 C/N performance in portable indoor (PI) and
               portable outdoor (PO) channels
        5.2.4 C/N performance in mobile channels
   5.3 Test purpose
   5.4 Method of test
        5.4.1 Initial conditions
        5.4.2 Measurement setup
        5.4.3 Procedure
   5.5 Test requirement
6 Receiver minimum and maximum input signal levels
   6.1 Definition and applicability
   6.2 Minimum requirements
        6.2.1 Minimum input levels
        6.2.2 Maximum input levels for wanted signals
   6.3 Test purpose
   6.4 Method of test
        6.4.1 Initial conditions
        6.4.2 Measurement setup
        6.4.3 Procedure
   6.5 Test requirement
7 Immunity to analogue and/or digital signals in other
   channels
   7.1 Definition and applicability
   7.2 Minimum requirements
        7.2.1 Immunity to pattern S1
        7.2.2 Immunity to pattern S2
        7.2.3 Immunity to pattern L1
        7.2.4 Immunity to pattern L2
        7.2.5 Immunity to pattern L3
        7.2.6 Immunity to pattern L4
   7.3 Test purpose
   7.4 Method of test
        7.4.1 Initial conditions
        7.4.2 Measurement setup
        7.4.3 Procedure
   7.5 Test requirement
8 Immunity to co-channel interference from analogue
   TV signals
   8.1 Definition and applicability
   8.2 Minimum requirements
   8.3 Test purpose
   8.4 Method of test
        8.4.1 Initial conditions
        8.4.2 Measurement setup
        8.4.3 Procedure
   8.5 Test requirement
9 Guard interval utilization: echoes within guard interval
   9.1 Definition and applicability
   9.2 Minimum requirements
   9.3 Test purpose
   9.4 Method of test
        9.4.1 Initial conditions
        9.4.2 Measurement setup
        9.4.3 Procedure
   9.5 Test requirement
10 Guard interval utilization: echoes outside the guard
   interval
   10.1 Definition and applicability
   10.2 Minimum requirements
   10.3 Test purpose
   10.4 Method of test
        10.4.1 Initial conditions
        10.4.2 Measurement setup
        10.4.3 Procedure
   10.5 Test requirement
11 Tolerance to impulse interference
   11.1 Definition and applicability
   11.2 Minimum requirements
   11.3 Test purpose
   11.4 Method of test
        11.4.1 Initial conditions
        11.4.2 Measurement setup
        11.4.3 Procedure
   11.5 Test requirement
12 GSM900 TX signal blocking test
   12.1 Definition and applicability
   12.2 Minimum requirements
        12.2.1 Minimum input levels
   12.3 Test purpose
   12.4 Method of test
        12.4.1 Initial conditions
        12.4.2 Measurement setup
        12.4.3 Procedure
   12.5 Test requirements
13 Mobile SFN channel test
   13.1 Definition and applicability
   13.2 Minimum requirements
   13.3 Test purpose
   13.4 Method of test
        13.4.1 Initial conditions
        13.4.2 Measurement setup
        13.4.3 Procedure
   13.5 Test requirements
Bibliography

IEC 62002-2:2008 provides the conformance testing rules and guidelines for equipment built to meet the Mobile and portable DVB-T/H radio access interface specification (IEC 62002-1). One aim is to limit the number of tests to a practical level. Nevertheless, the manufacturer is responsible of guaranteeing that the terminal fulfils all aspects of the mobile and portable DVB-T/H radio access interface specification (IEC 62002-1). This second edition cancels and replaces the first edition, published in 2005 and constitutes a technical revision. The main changes with respect to the previous edition are. DVB-H has been included as a part of the main specification. All the performance figures have been revised as new simulation results have been made available as well as new reference receivers for DVB-H have been developed. DVB-H now includes all the different MPE-FEC code rates. New portable indoor and portable outdoor channel models have been included as well as performance figures for those. A new 2x TU-6 mobile SFN test channel has been included. A new L4 linearity pattern has been added. Dedicated performance figures for DVB-H for S1, S2, L1 to L4 interference patterns have been included. A new GSM-interference measurement method has been added. This bilingual version (2012-03) corresponds to the monolingual English version, published in 2008-05.