IEC 62127-1:2007+AMD1:2013 CSV
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Ultrasonics - Hydrophones - Part 1: Measurement and characterizationof medical ultrasonic fields up to 40 MHz
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
25-03-2022
English - French
08-02-2013
FOREWORD
INTRODUCTION
1 Scope and object
2 Normative references
3 Terms, definitions and symbols
4 List of symbols
5 Measurement requirements
6 Measurement procedure
7 Beam characterization
8 Requirements for specific ultrasonic fields
9 Compliance statement
Annex A (informative) - General rationale
Annex B (informative) - Hydrophones and positioning
Annex C (informative) - Acoustic pressure and intensity
Annex D (informative) - Voltage to pressure conversion
Annex E (informative) - Correction for spatial averaging
Annex F (informative) - Acoustic output parameters for
multi-mode medical ultrasonic fields
in the absence of scan-frame
synchronization
Annex G (informative) - Propagation medium and degassing
Annex H (informative) - Specific ultrasonic fields
Annex I (informative) - Assessment of uncertainty in the
acoustic quantities obtained by
hydrophone measurements
Annex J (informative) - Transducer and hydrophone positioning
systems
Annex K (informative) - Beamwidth midpoint method
Bibliography
IEC 62127-1:2007+A1:2013 specifies methods of use of calibrated hydrophones for the measurement in liquids of acoustic fields generated by ultrasonic medical equipment operating in the frequency range up to 40 MHz. The objectives of this standard are:
- to define a group of acoustic parameters that can be measured on a physically sound basis;
- to define a second group of parameters that can be derived under certain assumptions from these measurements, and called derived intensity parameters;
- to define a measurement procedure that may be used for the determination of acoustic pressure parameters;
- to define the conditions under which the measurements of acoustic parameters can be made in the frequency range up to 40 MHz using calibrated hydrophones;
- and to define procedures for correcting, for limitations caused by the use of hydrophones with finite bandwidth and finite active element size. IEC 62127-1, IEC 62127-2 and IEC 62127-3 are being published simultaneously. Together these cancel and replace IEC 60866:1987, IEC 61101:1991, IEC 61102:1991, IEC 61220:1993 and IEC 62092:2001. The contents of the corrigendum of August 2008 have been included in this copy. The French version of this standard has not been voted upon. This consolidated version consists of the first edition (2007) and its amendment 1 (2013). Therefore, no need to order amendment in addition to this publication.
Committee |
TC 87
|
DevelopmentNote |
Together with IEC 62127-2 and IEC 62127-3, supersedes IEC 60866, IEC 61101, IEC 61102, IEC 61220 and IEC 62092. (08/2007) Stability Date: 2017. (11/2017)
|
DocumentType |
Standard
|
Pages |
178
|
PublisherName |
International Electrotechnical Committee
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
Standards | Relationship |
GOST R IEC 62127-1 : 2009 | Identical |
NEN EN IEC 62127-1 : 2007 AMD 1 2013 | Identical |
I.S. EN 62127-1:2007 | Identical |
PN EN 62127-1 : 2008 AMD 1 2013 | Identical |
BS EN 62127-1 : 2007 | Identical |
EN 62127-1:2007/A1:2013 | Identical |
NF EN 62127-1 : 2008 AMD 1 2013 | Identical |
DIN EN 62127-1:2013-11 | Identical |
ISO 14708-1:2014 | Implants for surgery — Active implantable medical devices — Part 1: General requirements for safety, marking and for information to be provided by the manufacturer |
I.S. EN 61391-1:2006 | Ultrasonics - Pulse-echo scanners - Part 1: Techniques for calibrating spatial measurement systems and measurement of system point-spread function response |
PD IEC/TS 62556:2014 | Ultrasonics. Field characterization. Specification and measurement of field parameters for high intensity therapeutic ultrasound (HITU) transducers and systems |
CEI EN 61161 : 2014 | ULTRASONICS - POWER MEASUREMENT - RADIATION FORCE BALANCES AND PERFORMANCE REQUIREMENTS |
CLC/TS 61949:2008 | Ultrasonics - Field characterization - In situ exposure estimation in finite-amplitude ultrasonic beams |
08/30173423 DC : DRAFT JULY 2008 | BS EN 60601-2-5 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-5: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF ULTRASONIC PHYSIOTHERAPY EQUIPMENT |
ISO 20998-1:2006 | Measurement and characterization of particles by acoustic methods Part 1: Concepts and procedures in ultrasonic attenuation spectroscopy |
I.S. EN 60601-2-5:2015 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-5: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF ULTRASONIC PHYSIOTHERAPY EQUIPMENT |
UNE-IEC 60050-802:2011 | International Electrotechnical Vocabulary (IEV) - Part 802: Ultrasonics |
CEI EN 60601-2-62 : 2016 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-62: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF HIGH INTENSITY THERAPEUTIC ULTRASOUND (HITU) EQUIPMENT |
S.R. CLC/TS 61949:2008 | ULTRASONICS - FIELD CHARACTERIZATION - IN SITU EXPOSURE ESTIMATION IN FINITE-AMPLITUDE ULTRASONIC BEAMS |
I.S. EN 60601-2-62:2015 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-62: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF HIGH INTENSITY THERAPEUTIC ULTRASOUND (HITU) EQUIPMENT |
BS EN 62127-2 : 2007 | ULTRASONICS - HYDROPHONES - PART 2: CALIBRATION FOR ULTRASONIC FIELDS UP TO 40 MHZ |
BS EN 62127-3 : 2007 | ULTRASONICS - HYDROPHONES - PART 3: PROPERTIES OF HYDROPHONES FOR ULTRASONIC FIELDS UP TO 40 MHZ |
I.S. EN 61391-2:2010 | ULTRASONICS - PULSE-ECHO SCANNERS - PART 2: MEASUREMENT OF MAXIMUM DEPTH OF PENETRATION AND LOCAL DYNAMIC RANGE |
NF EN 61391-2 : 2011 | ULTRASONICS - PULSE-ECHO SCANNERS - PART 2: MEASUREMENT OF MAXIMUM DEPTH OF PENETRATION AND LOCAL DYNAMIC RANGE |
EN 61161:2013 | Ultrasonics - Power measurement - Radiation force balances and performance requirements |
EN 61689:2013 | Ultrasonics - Physiotherapy systems - Field specifications and methods of measurement in the frequency range 0,5 MHz to 5 MHz |
EN 61391-2:2010 | Ultrasonics - Pulse-echo scanners - Part 2: Measurement of maximum depth of penetration and local dynamic range |
EN 61157:2007/A1:2013 | STANDARD MEANS FOR THE REPORTING OF THE ACOUSTIC OUTPUT OF MEDICAL DIAGNOSTIC ULTRASONIC EQUIPMENT (IEC 61157:2007/A1:2013) |
CSA C22.2 No. 60601.2.5:2011 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-5: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF ULTRASONIC PHYSIOTHERAPY EQUIPMENT |
UNE-EN 60601-2-5:2016 | Medical electrical equipment - Part 2-5: Particular requirements for the basic safety and essential performance of ultrasonic physiotherapy equipment |
CEI EN 61391-2 : 2011 | ULTRASONICS - PULSE-ECHO SCANNERS - PART 2: MEASUREMENT OF MAXIMUM DEPTH OF PENETRATION AND LOCAL DYNAMIC RANGE |
PD IEC/TR 62799:2013 | Models for evaluation of thermal hazard in medical diagnostic ultrasonic fields |
I.S. EN 60601-2-37:2008 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-37: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF ULTRASONIC MEDICAL DIAGNOSTIC AND MONITORING EQUIPMENT |
BS EN 60601-2-5:2015 | Medical electrical equipment Particular requirements for the basic safety and essential performance of ultrasonic physiotherapy equipment |
08/30177589 DC : DRAFT FEB 2008 | BS EN 62359 - ULTRASONIC - FIELD CHARACTERIZATION - TEST METHODS FOR THE DETERMINATION OF THERMAL AND MECHANICAL INDICES RELATED TO MEDICAL DIAGNOSTIC ULTRASONIC FIELDS |
BS EN 61157 : 2007 | STANDARD MEANS FOR THE REPORTING OF THE ACOUSTIC OUTPUT OF MEDICAL DIAGNOSTIC ULTRASONIC EQUIPMENT |
CEI EN 61689 : 2013 | ULTRASONICS - PHYSIOTHERAPY SYSTEMS - FIELD SPECIFICATIONS AND METHODS OF MEASUREMENT IN THE FREQUENCY RANGE 0,5 MHZ TO 5 MHZ |
NF EN 62127-2 : 2008 AMD 2 2017 | ULTRASONICS - HYDROPHONES - PART 2: CALIBRATION FOR ULTRASONIC FIELDS UP TO 40 MHZ |
IEC TS 62556:2014 | Ultrasonics - Field characterization - Specification and measurement of field parameters for high intensity therapeutic ultrasound (HITU) transducers and systems |
CSA C22.2 No. 60601.2.5 : 2011 : R2016 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-5: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF ULTRASONIC PHYSIOTHERAPY EQUIPMENT |
NF EN 61689 : 2013 | ULTRASONICS - PHYSIOTHERAPY SYSTEMS - FIELD SPECIFICATIONS AND METHODS OF MEASUREMENT IN THE FREQUENCY RANGE 0,5 MHZ TO 5 MHZ |
I.S. EN 62359:2011 | ULTRASONICS - FIELD CHARACTERIZATION - TEST METHODS FOR THE DETERMINATION OF THERMAL AND MECHANICAL INDICES RELATED TO MEDICAL DIAGNOSTIC ULTRASONIC FIELDS |
IEC TR 62781:2012 | Ultrasonics - Conditioning of water for ultrasonic measurements |
IEC 62127-2:2007+AMD1:2013+AMD2:2017 CSV | Ultrasonics - Hydrophones - Part 2: Calibration for ultrasonic fields up to 40 MHz |
BS EN 45502-1:2015 | Implants for surgery. Active implantable medical devices General requirements for safety, marking and for information to be provided by the manufacturer |
I.S. EN 45502-1:2015 | IMPLANTS FOR SURGERY - ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 1: GENERAL REQUIREMENTS FOR SAFETY, MARKING AND FOR INFORMATION TO BE PROVIDED BY THE MANUFACTURER |
I.S. EN 61157:2007 | STANDARD MEANS FOR THE REPORTING OF THE ACOUSTIC OUTPUT OF MEDICAL DIAGNOSTIC ULTRASONIC EQUIPMENT (IEC 61157:2007 (EQV)) |
BS EN 61161:2013 | Ultrasonics. Power measurement. Radiation force balances and performance requirements |
BS EN 60601-2-62:2015 | Medical electrical equipment Particular requirements for the basic safety and essential performance of high intensity therapeutic ultrasound (HITU) equipment |
12/30256177 DC : 0 | BS EN 60601-2-37 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-37: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF ULTRASONIC MEDICAL DIAGNOSTIC AND MONITORING EQUIPMENT |
BS ISO 20998-1:2006 | Measurement and characterization of particles by acoustic methods Concepts and procedures in ultrasonic attenuation spectroscopy |
07/30161032 DC : 0 | BS EN 61391-2 - ULTRASONICS - PULSE ECHO SCANNERS - PART 2: TECHNIQUES FOR MEASUREMENT OF MAXIMUM DEPTH OF VISUALIZATION AND THE DISPLAYED DYNAMIC RANGE |
15/30275154 DC : 0 | BS ISO 18406 - UNDERWATER ACOUSTICS - MEASUREMENT OF UNDERWATER RADIATED SOUND FROM PERCUSSIVE PILE DRIVING |
BS EN 62359 : 2011 | ULTRASONICS - FIELD CHARACTERIZATION - TEST METHODS FOR THE DETERMINATION OF THERMAL AND MECHANICAL INDICES RELATED TO MEDICAL DIAGNOSTIC ULTRASONIC FIELDS |
BS EN 60601-2-37 : 2008 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-37: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF ULTRASONIC MEDICAL DIAGNOSTIC AND MONITORING EQUIPMENT |
I.S. EN 61161:2013 | ULTRASONICS - POWER MEASUREMENT - RADIATION FORCE BALANCES AND PERFORMANCE REQUIREMENTS (IEC 61161:2013 (EQV)) |
ISO 18406:2017 | Underwater acoustics — Measurement of radiated underwater sound from percussive pile driving |
CSA C22.2 No. 60601-2-62 : 2015 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-62: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF HIGH INTENSITY THERAPEUTIC ULTRASOUND (HITU) EQUIPMENT |
IEC TS 61949:2007 | Ultrasonics - Field characterization - In situ exposure estimation in finite-amplitude ultrasonic beams |
IEC 60601-2-37:2007+AMD1:2015 CSV | Medical electrical equipment - Part 2-37: Particular requirements for the basic safety and essential performance of ultrasonic medical diagnostic and monitoring equipment |
EN 45502-1:2015 | IMPLANTS FOR SURGERY - ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 1: GENERAL REQUIREMENTS FOR SAFETY, MARKING AND FOR INFORMATION TO BE PROVIDED BY THE MANUFACTURER |
17/30352613 DC : 0 | BS IEC 63001 ED1.0 - MEASUREMENT AND EVALUATION OF THE CAVITATION NOISE |
BS EN 61689:2013 | Ultrasonics. Physiotherapy systems. Field specifications and methods of measurement in the frequency range 0,5 MHz to 5 MHz |
BS EN 61391-1 : 2006 | ULTRASONICS - PULSE-ECHO SCANNERS - PART 1: TECHNIQUES FOR CALIBRATING SPATIAL MEASUREMENT SYSTEMS AND MEASUREMENT OF SYSTEM POINT-SPREAD FUNCTION RESPONSE |
12/30191872 DC : 0 | BS EN 60601-2-62 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-62: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF HIGH INTENSITY THERAPEUTIC ULTRASOUND (HITU) SYSTEM |
13/30233325 DC : 0 | BS EN 45502-1 - ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 1: GENERAL REQUIREMENTS FOR SAFETY, MARKING AND INFORMATION TO BE PROVIDED BY THE MANUFACTURER |
BS ISO 18406:2017 | Underwater acoustics. Measurement of radiated underwater sound from percussive pile driving |
CEI CLC/TS 61949 : 2011 | ULTRASONICS - FIELD CHARACTERIZATION - IN SITU EXPOSURE ESTIMATION IN FINITE-AMPLITUDE ULTRASONIC BEAMS |
CEI EN 62359 : 2012 | ULTRASONICS - FIELD CHARACTERIZATION - TEST METHODS FOR THE DETERMINATION OF THERMAL AND MECHANICAL INDICES RELATED TO MEDICAL DIAGNOSTIC ULTRASONIC FIELDS |
I.S. EN 62127-2:2007 | ULTRASONICS - HYDROPHONES - PART 2: CALIBRATION FOR ULTRASONIC FIELDS UP TO 40 MHZ |
ANSI/AAMI/ISO 14708-1:2014 | IMPLANTS FOR SURGERY - ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 1: GENERAL REQUIREMENTS FOR SAFETY, MARKING AND FOR INFORMATION TO BE PROVIDED BY THE MANUFACTURER |
IEC TR 62799:2013 | Models for evaluation of thermal hazard in medical diagnostic ultrasonic fields |
IEC 60050-802:2011 | International Electrotechnical Vocabulary (IEV) - Part 802: Ultrasonics |
IEC 61161:2013 | Ultrasonics - Power measurement - Radiation force balances and performance requirements |
IEC 61391-1:2006+AMD1:2017 CSV | Ultrasonics - Pulse-echo scanners - Part 1: Techniques for calibrating spatial measurement systems and measurement of point-spread function response |
IEC 60601-2-62:2013 | Medical electrical equipment - Part 2-62: Particular requirements for the basic safety and essential performance of high intensity therapeutic ultrasound (HITU) equipment |
IEC 61391-2:2010 | Ultrasonics - Pulse-echo scanners - Part 2: Measurement of maximum depth of penetration and local dynamic range |
IEC 61157:2007+AMD1:2013 CSV | Standard means for the reporting of the acoustic output of medicaldiagnostic ultrasonic equipment |
IEC 62127-3:2007+AMD1:2013 CSV | Ultrasonics - Hydrophones - Part 3: Properties of hydrophones for ultrasonic fields up to 40 MHz |
CEI EN 60601-2-5 : 2016 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-5: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF ULTRASONIC PHYSIOTHERAPY EQUIPMENT |
05/30131891 DC : DRAFT JULY 2005 | ISO 20998-1 - PARTICLE CHARACTERIZATION BY ACOUSTIC METHODS - PART 1: ULTRASONIC ATTENUATION SPECTROSCOPY |
PREN 45502-1 : DRAFT 2013 | ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 1: GENERAL REQUIREMENTS FOR SAFETY, MARKING AND INFORMATION TO BE PROVIDED BY THE MANUFACTURER |
BS EN 61391-2:2010 | Ultrasonics. Pulse-echo scanners Measurement of maximum depth of penetration and local dynamic range |
17/30355518 DC : 0 | BS EN 63045 - ULTRASONICS - NON-FOCUSING AND WEAKLY FOCUSING PRESSURE PULSE SOURCES - CHARACTERISTICS OF FIELDS |
17/30353724 DC : 0 | BS EN 62359:2011/A1 - ULTRASONICS - FIELD CHARACTERIZATION - TEST METHODS FOR THE DETERMINATION OF THERMAL AND MECHANICAL INDICES RELATED TO MEDICAL DIAGNOSTIC ULTRASONIC FIELDS |
11/30230872 DC : 0 | BS EN 61689 - ULTRASONICS - PHYSIOTHERAPY SYSTEMS - FIELD SPECIFICATIONS AND METHODS OF MEASUREMENT IN THE FREQUENCY RANGE 0,5 MHZ TO 5 MHZ |
I.S. EN 61689:2013 | ULTRASONICS - PHYSIOTHERAPY SYSTEMS - FIELD SPECIFICATIONS AND METHODS OF MEASUREMENT IN THE FREQUENCY RANGE 0,5 MHZ TO 5 MHZ (IEC 61689:2013 (EQV)) |
14/30250927 DC : 0 | BS IEC 62736 - ULTRASONICS - PULSE-ECHO SCANNERS - QUALITY CONTROL OF DIAGNOSTIC MEDICAL ULTRASOUND SYSTEMS - SIMPLE METHODS FOR PERIODIC TESTING TO VERIFY STABILITY OF AN IMAGING SYSTEM'S ELEMENTARY PERFORMANCE |
11/30228497 DC : 0 | BS EN 61161 - ULTRASONICS - POWER MEASUREMENT - RADIATION FORCE BALANCES AND PERFORMANCE REQUIREMENTS |
NF EN 62127-3 : 2008 AMD 1 2013 | ULTRASONICS - HYDROPHONES - PART 3: PROPERTIES OF HYDROPHONES FOR ULTRASONIC FIELDS UP TO 40 MHZ |
I.S. EN 62127-3:2007 | ULTRASONICS - HYDROPHONES - PART 3: PROPERTIES OF HYDROPHONES FOR ULTRASONIC FIELDS UP TO 40 MHZ (IEC 62127-3:2007 (EQV)) |
IEC 60601-2-5:2009 | Medical electrical equipment - Part 2-5: Particular requirements for the basic safety and essential performance of ultrasonic physiotherapy equipment |
EN 62127-3:2007/A1:2013 | ULTRASONICS - HYDROPHONES - PART 3: PROPERTIES OF HYDROPHONES FOR ULTRASONIC FIELDS UP TO 40 MHZ (IEC 62127-3:2007/A1:2013) |
EN 62127-2:2007/A2:2017 | ULTRASONICS - HYDROPHONES - PART 2: CALIBRATION FOR ULTRASONIC FIELDS UP TO 40 MHZ |
IEC 62359:2010+AMD1:2017 CSV | Ultrasonics - Field characterization - Test methods for the determination of thermal and mechanical indices related to medical diagnostic ultrasonic fields |
IEC 61689:2013 | Ultrasonics - Physiotherapy systems - Field specifications and methods of measurement in the frequency range 0,5 MHz to 5 MHz |
EN 45502-1 : 2015 | IMPLANTS FOR SURGERY - ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 1: GENERAL REQUIREMENTS FOR SAFETY, MARKING AND FOR INFORMATION TO BE PROVIDED BY THE MANUFACTURER |
EN 61391-1:2006/A1:2017 | ULTRASONICS - PULSE-ECHO SCANNERS - PART 1: TECHNIQUES FOR CALIBRATING SPATIAL MEASUREMENT SYSTEMS AND MEASUREMENT OF SYSTEM POINT-SPREAD FUNCTION RESPONSE (IEC 61391-1:2006/A1:2017) |
EN 60601-2-5:2015 | Medical electrical equipment - Part 2-5: Particular requirements for the basic safety and essential performance of ultrasonic physiotherapy equipment |
EN 60601-2-37:2008/A1:2015 | Medical electrical equipment - Part 2-37: Particular requirements for the basic safety and essential performance of ultrasonic medical diagnostic and monitoring equipment |
EN 62359:2011/A1:2018 | ULTRASONICS - FIELD CHARACTERIZATION - TEST METHODS FOR THE DETERMINATION OF THERMAL AND MECHANICAL INDICES RELATED TO MEDICAL DIAGNOSTIC ULTRASONIC FIELDS |
EN 60601-2-62:2015 | Medical electrical equipment - Part 2-62: Particular requirements for the basic safety and essential performance of high intensity therapeutic ultrasound (HITU) equipment |
IEC 60601-2-37:2007+AMD1:2015 CSV | Medical electrical equipment - Part 2-37: Particular requirements for the basic safety and essential performance of ultrasonic medical diagnostic and monitoring equipment |
IEC 60565:2006 | Underwater acoustics - Hydrophones - Calibration in the frequency range 0,01 Hz to 1 MHz |
IEC 60601-2-5:2009 | Medical electrical equipment - Part 2-5: Particular requirements for the basic safety and essential performance of ultrasonic physiotherapy equipment |
IEC 61161:2013 | Ultrasonics - Power measurement - Radiation force balances and performance requirements |
IEC 61689:2013 | Ultrasonics - Physiotherapy systems - Field specifications and methods of measurement in the frequency range 0,5 MHz to 5 MHz |
IEC 61846:1998 | Ultrasonics - Pressure pulse lithotripters - Characteristics of fields |
IEC 60050-802:2011 | International Electrotechnical Vocabulary (IEV) - Part 802: Ultrasonics |
IEC 61828:2001 | Ultrasonics - Focusing transducers - Definitions and measurement methods for the transmitted fields |
IEC 61847:1998 | Ultrasonics - Surgical systems - Measurement and declaration of the basic output characteristics |
IEC TR 60854:1986 | Methods of measuring the performance of ultrasonic pulse-echo diagnostic equipment |
IEC TR 62781:2012 | Ultrasonics - Conditioning of water for ultrasonic measurements |
IEC 60469-1:1987 | Pulse techniques and apparatus. Part 1: Pulse terms and definitions |
IEC 60050-801:1994 | International Electrotechnical Vocabulary (IEV) - Part 801: Acoustics and electroacoustics |
IEC 62127-3:2007+AMD1:2013 CSV | Ultrasonics - Hydrophones - Part 3: Properties of hydrophones for ultrasonic fields up to 40 MHz |
ISO 16269-6:2014 | Statistical interpretation of data — Part 6: Determination of statistical tolerance intervals |
IEC 62127-2:2007+AMD1:2013+AMD2:2017 CSV | Ultrasonics - Hydrophones - Part 2: Calibration for ultrasonic fields up to 40 MHz |
IEC TS 61949:2007 | Ultrasonics - Field characterization - In situ exposure estimation in finite-amplitude ultrasonic beams |
IEC 61157:2007+AMD1:2013 CSV | Standard means for the reporting of the acoustic output of medicaldiagnostic ultrasonic equipment |
IEC 62359:2010+AMD1:2017 CSV | Ultrasonics - Field characterization - Test methods for the determination of thermal and mechanical indices related to medical diagnostic ultrasonic fields |
ISO/IEC Guide 98-3:2008 | Uncertainty of measurement — Part 3: Guide to the expression of uncertainty in measurement (GUM:1995) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.