IEC 62430:2009
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Environmentally conscious design for electrical and electronic products
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Superseded date
31-12-2021
Superseded by
Language(s)
English - French, Spanish, Castilian
Published date
23-02-2009
Publisher
Important note : Users cannot be edited or removed once added to your Multi user PDF.
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms and definitions
4 Fundamentals of environmentally conscious
design (ECD)
4.1 General
4.2 Life cycle thinking
4.3 Regulatory and stakeholders' requirements
4.4 Integration into management system
5 Environmentally conscious design process
(ECD process)
5.1 General
5.2 Analysis of regulatory and stakeholders'
environmental requirements
5.3 Identification and evaluation of environmental
aspects and corresponding impacts
5.4 Design and development
5.5 Review and continual improvement
5.6 Information sharing for ECD
Annex A (informative) Fundamentals of environmentally
conscious design
Annex B (informative) Elaboration of environmentally
conscious design process (ECD process)
Annex C (informative) Examples categories of tools
Bibliography
IEC 62430:2009 specifies requirements and procedures to integrate environmental aspects into design and development processes of electrical and electronic products, including combination of products, and the materials and components of which they are composed. It has the status of a horizontal standard in accordance with IEC Guide 108.
| DevelopmentNote |
Supersedes IEC GUIDE 114. (02/2011) Stability Date: 2018. (09/2017)
|
| DocumentType |
Standard
|
| Pages |
57
|
| PublisherName |
International Electrotechnical Committee
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| ANSI/IEC 62430:2010 | Identical |
| EN 62430:2009 | Identical |
| VDE 0042-2 : 2010 | Identical |
| NF EN 62430 : 2009 | Identical |
| I.S. EN 62430:2009 | Identical |
| NEN EN IEC 62430 : 2009 | Identical |
| UNE-EN 62430:2009 | Identical |
| CEI EN 62430 : 2011 | Identical |
| DIN EN 62430 : 2010 | Identical |
| BS EN 62430:2009 | Identical |
| JIS C 9910:2011 | Identical |
| 10/30197201 DC : 0 | BS EN ISO 14006 - ENVIRONMENTAL MANAGEMENT SYSTEMS - GUIDELINES FOR INCORPORATING ECODESIGN |
| BS EN 50598-3:2015 | Ecodesign for power drive systems, motor starters, power electronics and their driven applications Quantitative eco design approach through life cycle assessment including product category rules and the content of environmental declarations |
| BS EN 62474:2012 | Material declaration for products of and for the electrotechnical industry |
| PREN 50598-3 : DRAFT 2013 | ECODESIGN FOR POWER DRIVE SYSTEMS, MOTOR STARTERS, POWER ELECTRONICS & THEIR DRIVEN APPLICATIONS - PART 3: QUANTITATIVE ECO DESIGN APPROACH THROUGH LIFE CYCLE ASSESSMENT INCLUDING PRODUCT CATEGORY RULES AND THE CONTENT OF ENVIRONMENTAL DECLARATIONS |
| BS EN 50581:2012 | Technical documentation for the assessment of electrical and electronic products with respect to the restriction of hazardous substances |
| 16/30329864 DC : 0 | BS IEC 63000 - TECHNICAL DOCUMENTATION FOR THE ASSESSMENT OF ELECTRICAL AND ELECTRONIC PRODUCTS WITH RESPECT TO THE RESTRICTION OF HAZARDOUS SUBSTANCES |
| CEI EN 62040-4 : 2014 | UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 4: ENVIRONMENTAL ASPECTS - REQUIREMENTS AND REPORTING |
| I.S. EN 61076-3-120:2016 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-120: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR REWIRABLE POWER CONNECTORS WITH SNAP LOCKING FOR RATED VOLTAGE OF 250 V D.C. AND RATED CURRENT OF 30 A |
| ISO 14006:2011 | Environmental management systems Guidelines for incorporating ecodesign |
| EN 62040-4:2013 | Uninterruptible power systems (UPS) - Part 4: Environmental aspects - Requirements and reporting |
| EN 62542 : 2013 | ENVIRONMENTAL STANDARDIZATION FOR ELECTRICAL AND ELECTRONIC PRODUCTS AND SYSTEMS - GLOSSARY OF TERMS (IEC 62542:2013) |
| BS EN 62075:2012 | Audio/video, information and communication technology equipment. Environmentally conscious design |
| PD IEC/TR 62824:2016 | Guidance on material efficiency considerations in environmentally conscious design of electrical and electronic products |
| PD IEC/TR 62785:2013 | Guidance on the environmentally conscious design of fibre optics related products and subsystems |
| CEI EN 62474 : 2013 | MATERIAL DECLARATION FOR PRODUCTS OF AND FOR THE ELECTROTECHNICAL INDUSTRY |
| PD IEC/TR 62921:2016 | Quantification methodology for greenhouse gas emissions for computers and monitors |
| 17/30365666 DC : 0 | BS EN 62474 - MATERIAL DECLARATION FOR PRODUCTS OF AND FOR THE ELECTROTECHNICAL INDUSTRY |
| CEI EN 61076-3-120 : 1ED 2017 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-120: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR REWIRABLE POWER CONNECTORS WITH SNAP LOCKING FOR RATED VOLTAGE OF 250 V D.C. AND RATED CURRENT OF 30 A |
| IEC GUIDE 109:2012 | Environmental aspects - Inclusion in electrotechnical product standards |
| UNE-EN 50598-3:2015 | Ecodesign for power drive systems, motor starters, power electronics and their driven applications - Part 3: Quantitative eco design approach through life cycle assessment including product category rules and the content of environmental declarations |
| UNI EN ISO 14006 : 2011 | ENVIRONMENTAL MANAGEMENT SYSTEMS - GUIDELINES FOR INCORPORATING ECODESIGN |
| IEC TR 62726:2014 | Guidance on quantifying greenhouse gas emission reductions from the baseline for electrical and electronic products and systems |
| IEC TR 62837:2013 | Energy efficiency through automation systems |
| IEC PAS 61076-3-126:2018 | Connectors for electrical and electronic equipment - Product requirements - Part 3-126: Rectangular connectors - Detail specification for 5 pole power connector for industrial environments with push-pull locking |
| EN 60947-1:2007/A2:2014 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES (IEC 60947-1:2007/A2:2014) |
| TR 103 476 : 1.1.2 | ENVIRONMENTAL ENGINEERING (EE); CIRCULAR ECONOMY (CE) IN INFORMATION AND COMMUNICATION TECHNOLOGY (ICT); DEFINITION OF APPROACHES, CONCEPTS AND METRICS |
| PD IEC/TR 62726:2014 | Guidance on quantifying greenhouse gas emission reductions from the baseline for electrical and electronic products and systems |
| BS EN ISO 14006:2011 | Environmental management systems. Guidelines for incorporating ecodesign |
| 11/30249097 DC : 0 | BS EN 60947-1:2007+A2 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES |
| 08/30192173 DC : 0 | BS EN 62542 ED1 - ENVIRONMENTAL STANDARDIZATION FOR ELECTRICAL AND ELECTRONIC PRODUCTS AND SYSTEMS - STANDARDIZATION OF ENVIRONMENTAL ASPECTS - GLOSSARY OF TERMS |
| UNE-EN ISO 14006:2011 | Environmental management systems - Guidelines for incorporating ecodesign (ISO 14006:2011) |
| BS ISO 20140-5:2017 | Automation systems and integration. Evaluating energy efficiency and other factors of manufacturing systems that influence the environment Environmental performance evaluation data |
| BS EN 61076-3-120:2016 | Connectors for electronic equipment. Product requirements Rectangular connectors. Detail specification for rewirable power connectors with snap locking for rated voltage of 250 V d.c. and rated current of 30 A |
| PD IEC/TR 62476:2010 | Guidance for evaluation of products with respect to substance-use restrictions in electrical and electronic products |
| IEC TS 62844:2016 | Guidelines for quality and risk assessment for nano-enabled electrotechnical products |
| I.S. EN 62040-4:2013 | UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 4: ENVIRONMENTAL ASPECTS - REQUIREMENTS AND REPORTING (IEC 62040-4:2013 (EQV)) |
| ISO 20140-5:2017 | Automation systems and integration — Evaluating energy efficiency and other factors of manufacturing systems that influence the environment — Part 5: Environmental performance evaluation data |
| CEI EN 50581 : 2013 | TECHNICAL DOCUMENTATION FOR THE ASSESSMENT OF ELECTRICAL AND ELECTRONIC PRODUCTS WITH RESPECT TO THE RESTRICTION OF HAZARDOUS SUBSTANCES |
| ISO 20140-1:2013 | Automation systems and integration Evaluating energy efficiency and other factors of manufacturing systems that influence the environment Part 1: Overview and general principles |
| IEC TR 62635:2012 | Guidelines for end-of-life information provided by manufacturers and recyclers and for recyclability rate calculation of electrical and electronic equipment |
| IEC TR 62824:2016 | Guidance on material efficiency considerations in environmentally conscious design of electrical and electronic products |
| 12/30217456 DC : 0 | BS ISO 20140-1 - AUTOMATION SYSTEMS AND INTEGRATION - ENVIRONMENTAL AND ENERGY EFFICIENCY EVALUATION METHOD FOR MANUFACTURING SYSTEMS - PART 1: OVERVIEW AND GENERAL PRINCIPLES |
| I.S. EN 50598-3:2015 | ECODESIGN FOR POWER DRIVE SYSTEMS, MOTOR STARTERS, POWER ELECTRONICS AND THEIR DRIVEN APPLICATIONS - PART 3: QUANTITATIVE ECO DESIGN APPROACH THROUGH LIFE CYCLE ASSESSMENT INCLUDING PRODUCT CATEGORY RULES AND THE CONTENT OF ENVIRONMENTAL DECLARATIONS |
| BS EN 62040-4:2013 | Uninterruptible power systems (UPS) Environmental aspects. Requirements and reporting |
| EN IEC 61076-3-119:2018 | Connectors for electrical and electronic equipment - Product requirements - Part 3-119: Rectangular connectors - Detail specification for shielded and unshielded, free and fixed 10-way connectors with push-pull coupling for industrial environments for data transmission with frequencies up to 100 MHz |
| 10/30230340 DC : 0 | DD IEC/TS 62635 ED 1 - END OF LIFE RECYCLABILITY CALCULATION FOR ELECTRICAL AND ELECTRONIC EQUIPMENT |
| I.S. EN 62542:2013 | ENVIRONMENTAL STANDARDIZATION FOR ELECTRICAL AND ELECTRONIC PRODUCTS AND SYSTEMS - GLOSSARY OF TERMS (IEC 62542:2013 (EQV)) |
| BS ISO 20140-1:2013 | Automation systems and integration. Evaluating energy efficiency and other factors of manufacturing systems that influence the environment Overview and general principles |
| IEC TR 62785:2013 | Guidance on the environmentally conscious design of fibre optics related products and subsystems |
| I.S. EN 62474:2012 | MATERIAL DECLARATION FOR PRODUCTS OF AND FOR THE ELECTROTECHNICAL INDUSTRY (IEC 62474:2012 (EQV)) |
| IEC TR 62476:2010 | Guidance for evaluation of product with respect to substance-use restrictions in electrical and electronic products |
| I.S. EN ISO 14006:2011 | ENVIRONMENTAL MANAGEMENT SYSTEMS - GUIDELINES FOR INCORPORATING ECODESIGN |
| I.S. EN 62075:2012 | AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - ENVIRONMENTALLY CONSCIOUS DESIGN (IEC 62075:2012 (EQV)) |
| IEC TR 62921:2016 | Quantification methodology for greenhouse gas emissions for computers and monitors |
| IEC 62542:2013 | Environmental standardization for electrical and electronic products and systems - Glossary of terms |
| IEC 62040-4:2013 | Uninterruptible power systems (UPS) - Part 4: Environmental aspects - Requirements and reporting |
| IEC 62474:2012 | Material declaration for products of and for the electrotechnical industry |
| IEC 62075:2012 | Audio/video, information and communication technology equipment - Environmentally conscious design |
| IEC 60947-1:2007+AMD1:2010+AMD2:2014 CSV | Low-voltage switchgear and controlgear - Part 1: General rules |
| IEC 61076-3-120:2016 | Connectors for electronic equipment - Product requirements - Part 3-120: Rectangular connectors - Detail specification for rewirable power connectors with snap locking for rated voltage of 250 V d.c. and rated current of 30 A |
| UNE-EN 62075:2013 | Audio/video, information and communication technology equipment - Environmentally conscious design |
| PD IEC/PAS 61076-2-114:2016 | Connectors for electronic equipment. Product requirements Circular connectors. Detail specification for data and power connectors with M8 screw-locking |
| PD IEC/TR 62837:2013 | Energy efficiency through automation systems |
| BS EN 62542:2013 | Environmental standardization for electrical and electronic products and systems. Glossary of terms |
| 13/30280190 DC : 0 | BS EN 50598-3 - ECODESIGN FOR POWER DRIVE SYSTEMS, MOTOR STARTERS, POWER ELECTRONICS & THEIR DRIVEN APPLICATIONS - PART 3: QUANTITATIVE ECO DESIGN APPROACH THROUGH LIFE CYCLE ASSESSMENT INCLUDING PRODUCT CATEGORY RULES AND THE CONTENT OF ENVIRONMENTAL DECLARATIONS |
| BS EN 60947-1 : 2007 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES |
| CEI EN 62075 : 2013 | AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - ENVIRONMENTALLY CONSCIOUS DESIGN |
| IEC PAS 61076-2-114:2016 | Connectors for electronic equipment - Product requirements - Part 2-114: Circular connectors - Detail specification for data and power connectors with M8 screw-locking |
| I.S. EN 60947-1:2007 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES |
| I.S. EN IEC 61076-3-119:2018 | CONNECTORS FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-119: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR SHIELDED AND UNSHIELDED, FREE AND FIXED 10-WAY CONNECTORS WITH PUSH-PULL COUPLING FOR INDUSTRIAL ENVIRONMENTS FOR DATA TRANSMISSION WITH FREQUENCIES UP TO 100 MHZ |
| I.S. EN 50581:2012 | TECHNICAL DOCUMENTATION FOR THE ASSESSMENT OF ELECTRICAL AND ELECTRONIC PRODUCTS WITH RESPECT TO THE RESTRICTION OF HAZARDOUS SUBSTANCES |
| EN ISO 14006:2011 | Environmental management systems - Guidelines for incorporating ecodesign (ISO 14006:2011) |
| EN 50581:2012 | Technical documentation for the assessment of electrical and electronic products with respect to the restriction of hazardous substances |
| EN 62075:2012/AC:2013 | AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - ENVIRONMENTALLY CONSCIOUS DESIGN (IEC 62075:2012) |
| EN 50598-3:2015 | Ecodesign for power drive systems, motor starters, power electronics and their driven applications - Part 3: Quantitative eco design approach through life cycle assessment including product category rules and the content of environmental declarations |
| EN 62474:2012 | Material declaration for products of and for the electrotechnical industry |
| EN 61076-3-120:2016 | Connectors for electronic equipment - Product requirements - Part 3-120: Rectangular connectors - Detail specification for rewirable power connectors with snap locking for rated voltage of 250 V d.c. and rated current of 30 A |
| IEC GUIDE 109:2012 | Environmental aspects - Inclusion in electrotechnical product standards |
| ISO 14063:2006 | Environmental management Environmental communication Guidelines and examples |
| ISO/TR 14062:2002 | Environmental management Integrating environmental aspects into product design and development |
| ISO/IEC Guide 73:2002 | Risk management Vocabulary Guidelines for use in standards |
| ISO 14001:2015 | Environmental management systems — Requirements with guidance for use |
| ISO 9001:2015 | Quality management systems — Requirements |
| ISO 9000:2015 | Quality management systems — Fundamentals and vocabulary |
| ISO Guide 64:2008 | Guide for addressing environmental issues in product standards |
| ISO 14040:2006 | Environmental management Life cycle assessment Principles and framework |
| ISO 14050:2009 | Environmental management Vocabulary |
| IEC GUIDE 114:2005 | Environmentally conscious design - Integrating environmental aspects into design and development of electrotechnical products |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.