IEEE 532-2007 REDLINE
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
IEEE Guide for Selecting and Testing Jackets for Power, Instrumentation, and Control Cables
10-05-2021
English
07-01-2008
Important note : Users cannot be edited or removed once added to your Multi user PDF.
1 Overview
1.1 Scope
1.2 Purpose
1.3 General historical perspective
2 Acronyms and abbreviations
3 Jacket characteristics
3.1 Physical properties
3.2 Chemical and moisture resistance
3.3 Thermal stability
3.4 Electrical characteristics of non-conducting jackets
3.5 Electrical conductivity of semi-conducting jacket
3.6 Flame retardance
4 Corrosion protection
4.1 Corrosion protection of semi-conducting jackets on
underground distribution concentric neutral cables
5 Protective jackets
5.1 Jacket design configurations for shielded power cable
5.2 Jacket design configurations for low-voltage power,
control, and instrumentation cables
5.3 Non-conducting protective jackets
5.4 Semi-conducting protective jackets
5.5 Jackets on cables operating at cable emergency
temperature rating
6 Electrical characteristics of jackets
6.1 Sources of electrical stress imposed on jackets
7 Discussion on the selection and testing of jackets
7.1 General
7.2 Jackets for metallic sheathed cable
7.3 Jackets for cables without metallic sheaths
7.4 Testing of jackets
7.5 Jacket shrinkback
7.6 Jacket thicknesses
7.7 Special requirements
8 Properties of commonly used jackets
8.1 Summary of physical properties of commonly used
jacket materials
8.2 Characteristics of polymeric jacket materials
8.3 Neoprene
8.4 Polyvinyl chloride
8.5 Polyethylene
8.6 Chlorinated polyethylene
8.7 Chlorosulfonated polyethylene
8.8 Nitrile butadiene rubber/polyvinyl chloride
8.9 Ethylene propylene rubber
8.10 Polypropylene
8.11 Polyamide 6
8.12 Fluoropolymer
8.13 Thermoplastic elastomer
8.14 Low-smoke/flame-retardant jacketing
8.15 Identifiable jackets
Annex A (informative) Bibliography
Describes the selection and testing of jackets and other protective coverings for power, instrumentation, and control cables.
| Committee |
Insulated Conductors
|
| DocumentType |
Standard
|
| Pages |
63
|
| PublisherName |
Institute of Electrical & Electronics Engineers
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| IEEE DRAFT C62.22 : D8 2005 | GUIDE FOR THE APPLICATION OF METAL-OXIDE SURGE ARRESTERS FOR ALTERNATING-CURRENT SYSTEMS |
| CSA C68.5 : 2013 | SHIELDED AND CONCENTRIC NEUTRAL POWER CABLE FOR DISTRIBUTION UTILITIES |
| IEEE 1242-1999 | IEEE Guide for Specifying and Selecting Power, Control, and Special-Purpose Cable for Petroleum and Chemical Plants |
| IEEE 525-2007 | IEEE Guide for the Design and Installation of Cable Systems in Substations |
| IEEE DRAFT 525 : D15 2006 | DESIGN AND INSTALLATION OF CABLE SYSTEMS IN SUBSTATIONS |
| CSA C68.3 : 1997 | |
| IEEE 1617:2007 | DETECTION, MITIGATION, AND CONTROL OF CONCENTRIC NEUTRAL CORROSION IN MEDIUM-VOLTAGE UNDERGROUND CABLES |
| IEEE 1185-2010 | IEEE Recommended Practice for Cable Installation in Generating Stations and Industrial Facilities |
| IEEE 241 : 1990 | ELECTRIC POWER SYSTEMS IN COMMERCIAL BUILDINGS |
| IEEE 789-2013 | IEEE Standard Performance Requirements for Communications and Control Cables for Application in High-Voltage Environments |
| IEEE 1142-2009 REDLINE | IEEE Guide for the Selection, Testing, Application, and Installation of Cables having Radial-Moisture Barriers and/or Longitudinal Water Blocking |
| ASTM D 3349 : 2017 : REDLINE | Standard Test Method for Absorption Coefficient of Ethylene Polymer Material Pigmented with Carbon Black |
| UL 814:12ED 2011-07-06 | Gas-Tube-Sign Cable |
| CSA C22.2 No. 38 : 2014 | THERMOSET-INSULATED WIRES AND CABLES |
| NFPA 262 : 2015 | METHOD OF TEST FOR FLAME TRAVEL AND SMOKE OF WIRES AND CABLES FOR USE IN AIR-HANDLING SPACES |
| IEEE 1202-2006 | IEEE Standard for Flame-Propagation Testing of Wire & Cable |
| CSA C22.2 No. 52 : 2015 | UNDERGROUND SECONDARY AND SERVICE-ENTRANCE CABLES |
| UL 719:13ED 2015-09-08 | Nonmetallic-Sheathed Cables |
| IEEE 525-2007 | IEEE Guide for the Design and Installation of Cable Systems in Substations |
| NEMA WC 74 : 2012 | 5-46 KV SHIELDED POWER CABLE FOR USE IN THE TRANSMISSION AND DISTRIBUTION OF ELECTRIC ENERGY |
| C22.2 NO. 232-17 | Optical fiber cables |
| UL 1072:4ED 2006-06-30 | Medium-Voltage Power Cables |
| CSA C22.2 No. 49 : 2014 | FLEXIBLE CORDS AND CABLES |
| ASTM D 1248 : 2016 : REDLINE | Standard Specification for Polyethylene Plastics Extrusion Materials for Wire and Cable |
| NEMA WC 70 : 2009 | POWER CABLES RATED 2000 VOLTS OR LESS FOR THE DISTRIBUTION OF ELECTRICAL ENERGY |
| CSA C170.3 : 66(R1989) | POLYVINYL-CHLORIDE (PVC) PROTECTIVE COVERING ON PAPER-INSULATED METALLIC-SHEATHED POWER CABLE |
| CSA C22.2 No. 123 : 2016 | METAL SHEATHED CABLES |
| CSA C22.2 No. 179 : 2 | AIRPORT SERIES LIGHTING CABLES |
| CSA C22.2 No. 21 : 2014 | CORD SETS AND POWER-SUPPLY CORDS |
| CSA C22.2 No. 124 : 2016 | MINERAL-INSULATED CABLE |
| CSA C22.2 No. 96 : 2013 | PORTABLE POWER CABLES |
| UL 83:16ED 2017-07-28 | Standard for Thermoplastic-Insulated Wires and Cables |
| CSA C68.10 : 2014 | SHIELDED POWER CABLE FOR COMMERCIAL AND INDUSTRIAL APPLICATIONS, 5-46 KV |
| CSA C22.2 No. 131 : 2014 | TYPE TECK 90 CABLE |
| NEMA WC 57 : 2014 | CONTROL, THERMOCOUPLE EXTENSION, AND INSTRUMENTATION CABLES |
| NEMA WC 58 : 2008 | PORTABLE AND POWER FEEDER CABLES FOR USE IN MINES AND SIMILAR APPLICATIONS |
| C22.2 NO. 214-17 | Communications cables (Bi-national standard, with UL 444) |
| CSA C22.2 No. 210.2 : 2001 | APPLIANCE WIRING MATERIAL PRODUCTS |
| CSA C22.2 No. 96.1 : 2013 | MINE POWER FEEDER CABLES |
| CSA C22.2 No. 208 : 2014 | FIRE ALARM AND SIGNAL CABLE |
| UL 1309:3ED 2017-04-21 | Marine Shipboard Cable |
| IEEE 1617:2007 | DETECTION, MITIGATION, AND CONTROL OF CONCENTRIC NEUTRAL CORROSION IN MEDIUM-VOLTAGE UNDERGROUND CABLES |
| CSA C22.2 No. 239 : 2017 | CONTROL AND INSTRUMENTATION CABLES |
| UL 1063:8ED 2017-07-13 | Standard for Machine-Tool Wires and Cables |
| UL 1666:5ED 2007-02-16 | Test for Flame Propagation Height of Electrical and Optical-Fiber Cables Installed Vertically in Shafts |
| CSA C22.2 NO. 129:10 (R2019) | Neutral-supported cables |
| CSA C22.2 No. 127 : 2015 | EQUIPMENT AND LEAD WIRES |
| IEEE 323-2003 | IEEE Standard for Qualifying Class 1E Equipment for Nuclear Power Generating Stations |
| CFR 30(PTS1-199) : JUL 2017 | MINERAL RESOURCES - MINE SAFETY & HEALTH ADMINISTRATION, DEPARTMENT OF LABOUR |
| ASTM G 155 : 2013 : REDLINE | Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials |
| CSA C68.5 : 2013 | SHIELDED AND CONCENTRIC NEUTRAL POWER CABLE FOR DISTRIBUTION UTILITIES |
| C22.2 NO. 75-17 | Thermoplastic insulated wires and cables (Trinational standard with UL 83 and NMX-J-010-ANCE-2017) |
| UL 13:4ED 2015-03-18 | Power-Limited Circuit Cables |
| UL 2250:3ED 2017-03-30 | Instrumentation Tray Cable |
| CSA C22.2 No. 2556 : 2015 | WIRE AND CABLE TEST METHODS |
| CSA C22.2 NO No. 51:14 (R2018) | ARMOURED CABLES |
| IEEE 1235-2000 | IEEE Guide for the Properties of Identifiable Jackets for Underground Power Cables and Ducts |
| ANSI/NEMA WC 71/ICEA S-96-659:2014 | Standard for Nonshielded Cables Rated 2001-5000 V for Use in the Distribution of Electric Energy |
| UL 4:15ED 2004-01-15 | Armored Cable |
| IEEE 575-2014 | IEEE Guide for Bonding Shields and Sheaths of Single-Conductor Power Cables Rated 5 kV through 500 kV |
| IEEE 1143-2012 | IEEE Guide on Shielding Practice for Low Voltage Cables |
| UL 1426:5ED 2010-12-06 | Electrical Cables for Boats |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.