IEEE 802.3AE : 2002
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
INFORMATION TECHNOLOGY - TELECOMMUNICATIONS AND INFORMATION EXCHANGE BETWEEN SYSTEMS - LOCAL AND METROPOLITAN AREA NETWORKS - SPECIFIC REQUIREMENTS - PART 3: CARRIER SENSE MULTIPLE ACCESS WITH COLLISION DETECTION (CSMA/CD) ACCESS METHOD AND PHYSICAL LAYER SPECIFICATIONS - AMENDMENT: MEDIA ACCESS CONTROL (MAC) PARAMETERS, PHYSICAL LAYERS, AND MANAGEMENT PARAMETERS FOR 10 GB/S OPERATION
Hardcopy , PDF
09-12-2005
01-01-2002
Important note : Users cannot be edited or removed once added to your Multi user PDF.
REVISIONS TO IEEE Std 802.3-2002
1. (Changes to) Introduction
2. (Changes to) Media Access Control (MAC) service
specification
4. (Changes to) Media Access Control
6. (Changes to) Physical Signaling (PLS) service specifications
22. (Changes to) Reconciliation Sublayer (RS) and Media
Independent Interface (MII)
30. (Changes to) 10 Mb/s, 100 Mb/s, 1000 Mb/s, and 10 Gb/s MAC
Control, and Link Aggregation Management
31. (Changes to) MAC Control
35. (Changes to) Reconciliation Sublayer (RS) and Gigabit Media
Independent Interface (GMII)
ANNEXES
(Changes to) Annex 30A (normative) GDMO specification for
IEEE 802.3 managed object classes
(Changes to) Annex 30B (normative) GDMO and ASN.1 definitions
for management
(Changes to) Annex 31B (normative) MAC Control PAUSE operation
44. Introduction to 10 Gb/s baseband network
45. Management Data Input/Output (MDIO) Interface
46. Reconciliation Sublayer (RS) and 10 Gigabit Media
Independent Interface (XGMII)
47. XGMII Extender Sublayer (XGXS) and 10 Gigabit Attachment
Unit Interface (XAUI)
48. Physical Coding Sublayer (PCS) and Physical Medium
Attachment (PMA) sublayer, type 10GBASE-X
49. Physical Coding Sublayer (PCS) for 64B/66B, type 10GBASE-R
50. WAN Interface Sublayer (WIS), type 10GBASE-W
51. Physical Medium Attachment (PMA) sublayer, type Serial
52. Physical Medium Dependent (PMD) sublayer and baseband
medium, type 10G-E (Short Wavelength Serial), 10GBASE-L
(Long Wavelength Serial), and 10GBASE (Extra Long
Wavelength Serial)
53. Physical Medium Dependent (PMD) sublayer and baseband
medium, type 10GBASE-LX4
Annex 44A (informative) Diagram of Data Flow
Annex 45A (informative) Clause 45 MDIO electrical interface
Annex 48A (normative) Jitter test patterns
Annex 48B (informative) Jitter test methods
Annex 50A (informative) Thresholds for Severely Errored Second
calculations
Provides support to extend the IEEE 802.3 protocol and MAC specification to an operating speed of 10 Gb/s. Specifies several Physical Coding Sublayers known as 10GBASE-X, 10GBASE-R, and 10GBASE-W, as well as significant additional supporting material for a 10 Gigabit Media Independent Interface (XGMII), a 10 Gigabit Attachment Unit Interface (XAUI), a 10 Gigabit Sixteen-Bit Interface (XSBI) and management.
| DevelopmentNote |
Supersedes IEEE DRAFT 802.3AE This is an Amendment to IEEE 802.3 (09/2002)
|
| DocumentType |
Standard
|
| Pages |
547
|
| ProductNote |
New child ERR 1 is now added
|
| PublisherName |
Institute of Electrical & Electronics Engineers
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| SMPTE ST 2036-4 : 2015 | ULTRA HIGH DEFINITION TELEVISION - MULTI-LINK 10 GB/S SIGNAL/DATA INTERFACE USING 12-BIT WIDTH CONTAINER |
| SAE AS6135 | Interface Standard, Airborne EO/IR Systems, Data |
| IEC 60793-2-10:2017 | Optical fibres - Part 2-10: Product specifications - Sectional specification for category A1 multimode fibres |
| SAE AS6165 | Interface Standard, Airborne EO/IR Systems, Maintenance and Test |
| IEC PAS 62407:2005 | Real-time Ethernet control automation technology (EtherCATTM) |
| 17/30345069 DC : 0 | BS EN 60793-2-10 - OPTICAL FIBRES - PART 2-10: PRODUCT SPECIFICATIONS - SECTIONAL SPECIFICATION FOR CATEGORY A1 MULTIMODE FIBRES |
| IEC TR 61282-8:2006 | Fibre optic communication system design guides - Part 8: Calculating dispersion penalty from measured time-resolved chirp data |
| PD IEC/TR 61282-8:2006 | Fibre optic communication system design guides Calculating dispersion penalty from measured time-resolved chirp data |
| IEEE DRAFT 802.1AB : D13 2004 | LOCAL AND METROPOLITAN NETWORKS: STATION AND MEDIA ACCESS CONTROL CONNECTIVITY DISCOVERY |
| ANSI INCITS 364 : 2003 | INFORMATION TECHNOLOGY - FIBRE CHANNEL - 10 GIGABIT (10GFC) |
| ANSI INCITS 404 : 2006 | INFORMATION TECHNOLOGY - FIBRE CHANNEL - PHYSICAL INTERFACES-2 (FC-PI-2) |
| IEC 61753-1-1:2000 | Fibre optic interconnecting devices and passive components performance standard - Part 1-1: General and guidance - Interconnecting devices (connectors) |
| IEC 60793-1-41:2010 | Optical fibres - Part 1-41: Measurement methods and test procedures - Bandwidth |
| TIA/EIA 455-204 : A2013 | MEASUREMENT OF BANDWIDTH ON MULTIMODE FIBER |
| IEC 60825-1:2014 | Safety of laser products - Part 1: Equipment classification and requirements |
| TIA 455-175 : B2003 | OPTICAL FIBRES - PART 1-42: MEASUREMENT METHODS AND TEST PROCEDURES CHROMATIC DEPRESSION |
| IEC 61753-021-2:2007 | Fibre optic interconnecting devices and passive components performance standard - Part 021-2: Grade C/3 single-mode fibre optic connectors for category C - Controlled environment |
| TIA 492AAAC : B2009 | DETAIL SPECIFICATION FOR 850-NM LASER-OPTIMIZED, 50-[MU]M CORE DIAMETER/125-[MU]M CLADDING DIAMETER CLASS IA GRADED-INDEX MULTIMODE OPTICAL FIBERS |
| ATIS T1.269 : 2000 | INFORMATION INTERCHANGE - STRUCTURE AND REPRESENTATION OF TRACE MESSAGE FORMATS FOR THE NORTH AMERICAN TELECOMMUNICATIONS |
| IEC 61753-022-2:2012 | Fibre optic interconnecting devices and passive components - Performance standard - Part 022-2: Fibre optic connectors terminated on multimode fibre for category C - Controlled environment |
| ATIS T1.416 : 99(R2005) | NETWORK TO CUSTOMER INSTALLATION INTERFACES - SYNCHRONOUS OPTICAL NETWORK (SONET) PHYSICAL LAYER SPECIFICATION: COMMON CRITERIA |
| TIA/EIA 455-203 : A2009(R2014) | LIGHT SOURCE ENCIRCLED FLUX MEASUREMENT METHOD |
| ATIS T1.105 : 2001 SUPP A 2002 | SYNCHRONOUS OPTICAL NETWORK (SONET) - BASIC DESCRIPTION INCLUDING MULTIPLEX STRUCTURE, RATES, AND FORMATS |
| TIA 526-4 : A1997 | OPTICAL EYE PATTERN MEASUREMENT PROCEDURE |
| ANSI INCITS TR 25 : 1999 | INFORMATION TECHNOLOGY - FIBRE CHANNEL - METHODOLOGIES FOR JITTER SPECIFICATION |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.