Skip to content
Please enter a keyword to search

  • IEEE 802.3AH : 2004

    View superseded by
    Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
    View superseded by

    IEEE STANDARD FOR INFORMATION TECHNOLOGY - TELECOMMUNICATIONS AND INFORMATION EXCHANGE BETWEEN SYSTEMS - LOCAL AND METROPOLITAN AREA NETWORKS - SPECIFIC REQUIREMENTS - CARRIER SENSE MULTIPLE ACCESS WITH COLLISION DETECTION (CSMA/CD) ACCESS METHOD AND PHYSICAL LAYER SPECIFICATIONS - AMENDMENT: MEDIA ACCESS CONTROL PARAMETERS, PHYSICAL LAYERS, AND MANAGEMENT PARAMETERS FOR SUBSCRIBER ACCESS

    Available format(s):  Hardcopy, PDF

    Superseded date:  09-12-2005

    Language(s):  English

    Published date:  01-01-2004

    Publisher:  Institute of Electrical & Electronics Engineers

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    1 Introduction
       1.2 Notation
       1.3 Normative References
       1.4 Definitions
       1.5 Abbreviations
    22 Reconciliation Sublayer (RS) and Media Independent
       Interface (MII)
    30 10 Mb/s, 100 Mb/s, 1000 Mb/s and 10 Gb/s Management
       30.1 Overview
       30.11 Layer Management for Physical Medium Entity (PME)
    45 Management Data Input/Output (MDIO) Interface
       45.1 Overview
       45.2 MDIO interface registers
       45.5 Protocol Implementation Conformance Statement (PICS)
             proforma for Clause 45, MDIO/MDC management interface
    Annex A (informative) Bibliography
    Annex 30A (normative) GDMO specification for IEEE 802.3
              managed object classes
    Annex 30B (normative) GDMO and ASN.1 definitions for
              management
    Annex 31A (normative) MAC Control opcode assignments
    Annex 43B (normative) Requirements for support of Slow
              Protocols
    56 Introduction to Ethernet for subscriber access networks
       56.1 Overview
       56.2 State diagrams
       56.3 Protocol Implementation Conformance Statement (PICS)
             proforma
    57 Operations, Administration, and Maintenance (OAM)
       57.1 Overview
       57.2 Functional specifications
       57.3 Detailed functions and state diagrams
       57.4 OAM PDUs
       57.5 OAM TLVs
       57.6 Variables
       57.7 Protocol Implementation Conformance Statement (PICS)
             proforma for Clause 57, Operations, Administration,
             and Maintenance (OAM)
    58 Physical Medium Dependent (PMD) sublayer and medium, type
       100BASE-LX10 (Long Wavelength) and 100BASE-BX10 (BiDirectional
       Long Wavelength)
       58.1 Overview
       58.2 PMD functional specifications
       58.3 PMD to MDI optical specifications for 100BASE-LX10
       58.4 PMD to MDI optical specifications for 100BASE-BX10
       58.5 Illustrative 100BASE-LX10 and 100BASE-BX10 channels
             and penalties (informative)
       58.6 Jitter at TPI and TP4 for 100BASE-LX10 and
             100BASE-BX10 (informative)
       58.7 Optical measurement requirements
       58.8 Environmental safety and labeling
       58.9 Characteristics of the fiber optic cabling
       58.10 Protocol Implementation Conformance Statement (PICS)
             proforma for Clause 58, Physical Medium Dependent
             (PMD) sublayer and medium, type 100BASE-LX10 (Long
             Wavelength) and 100BASE-BX10 (BiDirectional Long
             Wavelength)
    59 Physical Medium Dependent (PMD) sublayer and medium,
       type 1000BASE-LX10 (Long Wavelength) and 1000BASE-BX10
       (BiDirectional Long Wavelength)
       59.1 Overview
       59.2 PMD functional specifications
       59.3 PMD to MDI optical specifications for 1000BASE-LX10
       59.4 PMD to MDI optical specifications for 1000BASE-BX10-D
             and 1000BASE-BX10-U
       59.5 Illustrative 1000BASE-LX10 and 1000BASE-BX10 channels
             and penalties (informative)
       59.6 Jitter specifications
       59.7 Optical measurement requirements
       59.8 Environmental, safety and labeling specifications
       59.9 Characteristics of the fiber optic cabling
       59.10 Protocol Implementation Conformance Statement (PICS)
             proforma for Clause 59, Physical Medium Dependent
             (PMD) sublayer and medium, type 1000BASE-LX10 (Long
             Wavelength) and 1000BASE-BX10 (Bidirectional Long
             Wavelength)
    60 Physical Medium Dependent (PMD) sublayer and medium, type
       1000BASE-PX10 and 1000BASE-PX20 (long wavelength passive
       optical networks)
       60.1 Overview
       60.2 PMD functional specifications
       60.3 PMD to MDI optical specifications for 1000BASE-PX10-D
             and 1000BASE-PX10-U
       60.4 PMD to MDI optical specifications for 1000BASE-PX20-D
             and 1000BASE-PX20-U
       60.5 Illustrative 1000BASE-PX10 and 1000BASE-PX20 channels
             and penalties (informative)
       60.6 Jitter at TPI-4 for 1000BASE-PX10 and 1000BASE-PX20
             (informative)
       60.7 Optical measurement requirements
       60.8 Environmental, safety, and labeling
       60.9 Characteristics of the fiber optic cabling
       60.10 Protocol Implementation Conformance Statement (PICS)
             proforma for Clause 60, Physical Medium Dependent
             (PMD) sublayer and medium, type 1000BASE-PX10 and
             1000BASE-PX20 (long wavelength passive optical
             networks)
    61 Physical Coding Sublayer (PCS), Transmission Convergence
       (TC) sublayer, and common specifications, type 10PASS-TS
       and type 2BASE-TL
       61.1 Overview
       61.2 PCS functional specifications
       61.3 TC sublayer functional specifications
       61.4 Handshaking and PHY control specification for type
             2BASE-TL and 10PASS-TS
       61.5 Link segment characteristics
       61.6 MDI specification
       61.7 System considerations
       61.8 Environmental specifications
       61.9 PHY labeling
       61.10 Protocol Implementation Conformance Statement (PICS)
             proforma for Clause 61, Physical Coding Sublayer (PCS),
             Transmission Convergence (TC) sublayer, and common
             specifications type 10PASS-TS, 2BASE-TL
    62 Physical Medium Attachment (PMA) and Physical Medium
       Dependent (PMD), type 10PASS-TS
       62.1 Overview
       62.2 PMA functional specifications
       62.3 PMD functional specifications
       62.4 Protocol Implementation Conformance Statement (PICS)
             proforma for Clause 62, Physical Medium Attachment
             (PMA) and Physical Medium Dependent (PMD), type
             10PASS-TS
    63 Physical Medium Attachment (PMA) and Physical Medium
       Dependent (PMD), type 2BASE-TL
       63.1 2BASE-TL Overview
       63.2 2BASE-TL PMA functional specifications
       63.3 2BASE-TL PMD functional specifications
       63.4 Protocol Implementation Conformance Statement (PICS)
             proforma for Clause 63, Physical Medium Attachment
             (PMA) and Physical Medium Dependent (PMD), type
             2BASE-TL
    64 Multi-point MAC Control
       64.1 Overview
       64.2 Multi-point MAC Control operation
       64.3 Multi-point Control Protocol (MPCP)
       64.4 Protocol Implementation Conformance Statement (PICS)
             proforma for Clause 64, Multi-point MAC Control
    65 Extensions of the Reconciliation Sublayer (RS) and Physical
       Coding Sublayer (PCS)/Physical Media Attachment (PMA) for
       1000BASE-X for Multi-Point Links and Forward Error Correction
       65.1 Extensions of the Reconciliation Sublayer (RS) for
             Point to Point Emulation
       65.2 Extensions of the physical coding sublayer for data
             detection and forward error correction
       65.3 Extensions to PMA for 1000BASE-PX
       65.4 Protocol Implementation Conformance Statement (PICS)
             proforma for Clause 65, Extensions of the Reconciliation
             Sublayer (RS) and Physical Coding Sublayer (PCS)/Physical
             Media Attachment (PMA) for 1000BASE-X for Multi-Point
             Links and Forward Error Correction
    66 Extensions of the 10 Gb/s Reconciliation Sublayer (RS),
       100BASE-X PHY, and 1000BASE-X PHY for unidirectional transport
       66.1 Modifications to the physical coding sublayer (PCS) and
             physical medium attachment (PMA) sublayer, type
             100BASE-X
       66.2 Modifications to the physical coding sublayer (PCS) and
             physical medium attachment (PMA) sublayer, type
             1000BASE-X
       66.3 Modifications to the reconciliation sublayer (RS) for
             10 Gb/s operation
       66.4 Protocol Implementation Conformance Statement (PICS)
             proforma for Clause 66, Extensions of the 10 Gb/s
             Reconciliation Sublayer (RS), 100BASE-X PHY, and
             1000BASE-X PHY for unidirectional transport
    67 System considerations for Ethernet subscriber access
       networks
       67.1 Overview
       67.2 Discussion and examples of EFM P2MP topologies
       67.3 Hybrid Media topologies
       67.4 Topology limitations
       67.5 Deployment restrictions for subscriber access
             copper
       67.6 Operations, Administration, and Maintenance
    Annex 4A (normative) Simplified full duplex media access
             control
    Annex 22D (informative) Clause 22 access to Clause 45 MMD
              registers
    Annex 58A (informative) Frame based testing
    Annex 61A (informative) EFM copper examples
    Annex 61B (normative) Handshake codepoints for 2BASE-TL and
              10PASS-TS
    Annex 62A (normative) PMD profiles for 10PASS-TS
    Annex 62B (normative) Performance guidelines for 10PASS-TS
              PMD profiles
    Annex 62C (informative) 10PASS-TS Examples
    Annex 63A (normative) PMD Profiles for 2BASE-TL
    Annex 63B (normative) Performance guidelines for 2BASE-TL PMD
              profiles
    Annex 67A (informative) Environmental characteristics for
              Ethernet subscriber access networks

    Abstract - (Show below) - (Hide below)

    Specifies the concept of Ethernet Passive Optical Networks (EPONs), in which a point to multi-point (P2MP) network topology is implemented with passive optical splitters, along with optical fiber PMDs that support this topology.

    General Product Information - (Show below) - (Hide below)

    Development Note This is an Amendment to IEEE 802.3 (09/2004)
    Document Type Standard
    Publisher Institute of Electrical & Electronics Engineers
    Status Superseded
    Superseded By
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    I.S. EN 61753-086-2:2009 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 086-2: NON-CONNECTORISED SINGLE-MODE BIDIRECTIONAL 1490/1550 NM DOWNSTREAM 1310 NM UPSTREAM WWDM DEVICES FOR CATEGORY C - CONTROLLED ENVIRONMENT
    TS 101 569-1 : 1.1.1 INTEGRATED BROADBAND CABLE TELECOMMUNICATION NETWORKS (CABLE); CABLE NETWORK TRANSITION TO IPV6; PART 1: IPV6 TRANSITION REQUIREMENTS
    IEC 61753-042-2:2014 Fibre optic interconnecting devices and passive components - Performance standard - Part 042-2: Plug-pigtail-style and plug-receptacle-style of OTDR reflecting devices for category C - Controlled environments
    EN 61753-087-6:2012 Fibre optic interconnecting devices and passive components - Performance standard - Part 087-6: Non-connectorised single-mode bidirectional 1310 nm upstream and 1490 nm downstream WWDM devices for category O - Uncontrolled environment
    EN 61784-5-3:2013 Industrial communication networks - Profiles - Part 5-3: Installation of fieldbuses - Installation profiles for CPF 3
    EN 60728-13:2010 Cable networks for television signals, sound signals and interactive services - Part 13: Optical systems for broadcast signal transmissions
    EN 61753-086-2:2009 Fibre optic interconnecting devices and passive components performance standard - Part 086-2: Non-connectorised single-mode bidirectional 1490 / 1550 nm downstream 1310 nm upstream WWDM devices for category C - Controlled environment
    BS EN 61753-041-2:2014 Fibre optic interconnecting devices and passive components. Performance standard Non-connectorized single-mode OTDR reflecting device for category C. Controlled environment
    11/30244755 DC : 0 BS EN 61753-041-2 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 041-2: NON-CONNECTORISED SINGLE-MODE FTTX REFLECTOR DEVICE FOR CATEGORY C - CONTROLLED ENVIRONMENT
    BS EN 61753-089-2:2013 Fibre optic interconnecting devices and passive components. Performance standard Non-connectorized single-mode bidirectional OTDR monitoring WWDM devices for category C. Controlled environment
    TS 102 973 : 1.1.1 ACCESS TERMINALS, TRANSMISSION AND MULTIPLEXING (ATTM); NETWORK TERMINATION (NT) IN NEXT GENERATION NETWORK ARCHITECTURES
    TR 101 546 : 1.1.1 ACCESS, TERMINALS, TRANSMISSION AND MULTIPLEXING (ATTM); INTEGRATED BROADBAND CABLE AND TELEVISION NETWORKS; CONVERGED CABLE ACCESS PLATFORM ARCHITECTURE
    I.S. EN 61753-087-6:2012 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 087-6: NON-CONNECTORISED SINGLE-MODE BIDIRECTIONAL 1310 NM UPSTREAM AND 1490 NM DOWNSTREAM WWDM DEVICES FOR CATEGORY O - UNCONTROLLED ENVIRONMENT (IEC 61753-087-6:2012 (EQV))
    I.S. EN 61753-041-2:2014 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 041-2: NON-CONNECTORIZED SINGLE-MODE OTDR REFLECTING DEVICE FOR CATEGORY C - CONTROLLED ENVIRONMENT
    BS EN 61753-086-2:2009 Fibre optic interconnecting devices and passive components performance standard Non-connectorised single-mode bidirectional 1490 / 1550 nm downstream 1310 nm upstream WWDM devices for category C. Controlled environment
    09/30191277 DC : DRAFT MAY 2009 BS EN 61753-087-2 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 087-2: NON-CONNECTORISED SINGLE-MODE BIDIRECTIONAL 1310 NM UPSTREAM AND 1490 NM DOWNSTREAM WWDM DEVICES FOR CATEGORY C - CONTROLLED ENVIRONMENT
    I.S. EN 61753-086-6:2011 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 086-6: NON-CONNECTORIZED SINGLE-MODE BIDIRECTIONAL 1490/1550 NM DOWNSTREAM AND 1310 NM UPSTREAM WWDM DEVICES FOR CATEGORY O - UNCONTROLLED ENVIRONMENT
    IEC 61753-382-2:2015 Fibre optic interconnecting devices and passive components - Performance standard - Part 382-2: Non-connectorized single-mode bidirectional G-PON-NGA WWDM devices for category C - Controlled environment
    EN 61753-042-2:2014 Fibre optic interconnecting devices and passive components - Performance standard - Part 042-2: Plug-pigtail-style and plug-receptacle-style OTDR reflecting devices for category C - Controlled environments
    09/30191285 DC : DRAFT MAY 2009 BS EN 61753-086-6 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 086-6: NON-CONNECTORISED SINGLE-MODE BI-DIRECTIONAL 1490/1550 NM DOWNSTREAM AND 1310 NM UPSTREAM WWDM DEVICES FOR CATEGORY O - CONTROLLED ENVIRONMENT
    10/30227070 DC : 0 BS EN 61753-087-6 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 087-6: NON-CONNECTORISED SINGLE-MODE BIDIRECTIONAL 1310 NM UPSTREAM AND 1490 NM DOWNSTREAM WWDM DEVICES FOR CATEGORY O - UNCONTROLLED ENVIRONMENT
    IEEE 1904.1-2013 IEEE Standard for Service Interoperability in Ethernet Passive Optical Networks (SIEPON)
    I.S. EN 61784-5-3:2013 INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 5-3: INSTALLATION OF FIELDBUSES - INSTALLATION PROFILES FOR CPF 3
    I.S. EN 61753-042-2:2014 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 042-2: PLUG-PIGTAIL-STYLE AND PLUG-RECEPTACLE-STYLE OTDR REFLECTING DEVICES FOR CATEGORY C - CONTROLLED ENVIRONMENTS
    IEC 60728-13:2010 Cable networks for television signals, sound signals and interactive services - Part 13: Optical systems for broadcast signal transmissions
    IEC 61753-087-2:2010 Fibre optic interconnecting devices and passive components - Performance standard - Part 087-2: Non-connectorized single-mode bidirectional 1 310 nm upstream and 1 490 nm downstream WWDM devices for category C - Controlled environment
    IEC 61753-086-2:2009 Fibre optic interconnecting devices and passive components performance standard - Part 086-2: Non-connectorized single-mode bidirectional 1490 / 1550 nm downstream 1310 nm upstream WWDM devices for category C - Controlled environment
    BS EN 61784-5-3:2013 Industrial communication networks. Profiles Installation of fieldbuses. Installation profiles for CPF 3
    IEC 61753-086-6:2010 Fibre optic interconnecting devices and passive components - Performance standard - Part 086-6: Non-connectorized single-mode bidirectional 1 490 / 1 550 nm downstream and 1 310 nm upstream WWDM devices for category O - Uncontrolled environment
    IEC 61753-041-2:2014 Fibre optic interconnecting devices and passive components - Performance standard - Part 041-2: Non-connectorized single-mode OTDR reflecting device for category C - Controlled environment
    IEC 61753-089-2:2013 Fibre optic interconnecting devices and passive components - Performance standard - Part 089-2: Non-connectorized single-mode bidirectional OTDR monitoring WWDM devices for category C - Controlled environment
    EN 61753-086-6 : 2011 Fibre optic interconnecting devices and passive components - Performance standard - Part 086-6: Non-connectorized single-mode bidirectional 1 490 / 1 550 nm downstream and 1 310 nm upstream WWDM devices for category O - Uncontrolled environment
    BS EN 61753-087-2:2011 Fibre optic interconnecting devices and passive components. Performance standard Non-connectorized single-mode bidirectional 1310 nm upstream and 1490 nm downstream WWDM devices for category C. Controlled environment
    I.S. EN 61753-089-2:2013 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 089-2: NON-CONNECTORIZED SINGLE-MODE BIDIRECTIONAL OTDR MONITORING WWDM DEVICES FOR CATEGORY C - CONTROLLED ENVIRONMENT (IEC 61753-089-2:2013 (EQV))
    I.S. EN 60728-13:2010 CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 13: OPTICAL SYSTEMS FOR BROADCAST SIGNAL TRANSMISSIONS
    BS EN 60728-13:2010 Cable networks for television signals, sound signals and interactive services Optical systems for broadcast signal transmissions
    BS EN 61753-086-6:2011 Fibre optic interconnecting devices and passive components. Performance standard Non-connectorized single-mode bidirectional 1490 / 1550 nm downstream and 1310 nm upstream WWDM devices for category O. Uncontrolled environment
    BS EN 61753-087-6:2012 Fibre optic interconnecting devices and passive components. Performance standard Non-connectorised single-mode bidirectional 1310 nm upstream and 1490 nm downstream WWDM devices for category O. Uncontrolled environment
    BS EN 61753-042-2:2014 Fibre optic interconnecting devices and passive components. Performance standard Plug-pigtail-style and plug-receptacle-style OTDR reflecting devices for category C. Controlled environments
    I.S. EN 61753-087-2:2011 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 087-2: NON-CONNECTORIZED SINGLE-MODE BIDIRECTIONAL 1310 NM UPSTREAM AND 1490 NM DOWNSTREAM WWDM DEVICES FOR CATEGORY C - CONTROLLED ENVIRONMENT
    EN 61753-089-2:2013 Fibre optic interconnecting devices and passive components - Performance standard - Part 089-2: Non-connectorized single-mode bidirectional OTDR monitoring WWDM devices for category C - Controlled environment
    EN 61753-087-2:2011 Fibre optic interconnecting devices and passive components - Performance standard - Part 087-2: Non-connectorized single-mode bidirectional 1310 nm upstream and 1490 nm downstream WWDM devices for category C - Controlled environment
    EN 61753-041-2:2014 Fibre optic interconnecting devices and passive components - Performance standard - Part 041-2: Non-connectorized single-mode OTDR reflecting device for category C - Controlled environment

    Standards Referencing This Book - (Show below) - (Hide below)

    TIA 455-95 : A2000(R2005) FOTP-95 - ABSOLUTE OPTICAL POWER TEST FOR OPTICAL FIBERS AND CABLES
    IEC 61280-2-2:2012 Fibre optic communication subsystem test procedures - Part 2-2: Digital systems - Optical eye pattern, waveform and extinction ratio measurement
    TIA 455-127 : A2006(R2014) FOTP-127-A - BASIC SPECTRAL CHARACTERIZATION OF LASER DIODES
    IEC 61754-1:2013 Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 1: General and guidance
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective