IEEE/ANSI C63.5-2017
Current
The latest, up-to-date edition.
American National Standard for Electromagnetic Compatibility--Radiated Emission Measurements in Electromagnetic Interference (EMI) Control--Calibration and Qualification of Antennas (9 kHz to 40 GHz)
Hardcopy , PDF
English
08-05-2017
Important note : Users cannot be edited or removed once added to your Multi user PDF.
1. Overview and scope
2. Normative references
3. Definitions, acronyms, and abbreviations
4. General measurement considerations
5. Standard site method (30 MHz to 40 GHz)
6. Reference antenna method (30 MHz to 1 GHz)
7. Equivalent capacitance substitution method
Annex A (informative) - Determination of E[D][max]
Annex B (informative) - Worksheets for the discrete
frequency antenna calibration method
Annex C (informative) - Roberts dipole reference antenna
Annex D (informative) - Example construction drawings
for Roberts dipole antenna
Annex E (normative) - Monopole characteristics
Annex F (normative) - Tuned dipole antenna correction
factors, [Delta]AF, for free-space antenna factor (30
MHz to 1 GHz)
Annex G (normative) - Biconical dipole antenna correction
factors (30 MHz to 200 MHz) for free-space antenna
factor and normalized site attenuation
Annex H (normative) - Requirements for geometry-specific
correction factors for biconical dipoles used in
normalized site attenuation measurements
Annex I (normative) - Procedure for measuring
geometry-specific correction factors for a pair of
broadband antennas
Annex J (normative) - Requirements for an antenna
calibration site
Annex K (normative) - Determining free-space antenna
factors using time domain (above 1 GHz to 40 GHz)
Annex L (informative) - Procedure for estimating measurement
uncertainties for antenna calibrations using SSM
Annex M (informative) - Procedure for computing estimated
measurement uncertainties in reference antenna method
antenna calibrations
Annex N (informative) - Loop antenna calibration measurements
Annex O (informative) - Bibliography
This standard provides methods for determining antenna factors (AFs) and associated parameters of antennas used to perform radiated emission measurements in electromagnetic interference (EMI) control from 9 kHz to 40 GHz.
| DevelopmentNote |
Supersedes IEEE DRAFT C63.5. (01/2005)
|
| DocumentType |
Standard
|
| ISBN |
978-1-5044-3576-5
|
| Pages |
228
|
| ProductNote |
THIS STANDARD ALSO REFERS TO ANSI C63.7 NEW CHILD COR 1 IS NOW ADDED.
|
| PublisherName |
Institute of Electrical & Electronics Engineers
|
| Status |
Current
|
| Supersedes |
| SAE J1113/1_202304 | Electromagnetic Compatibility Measurement Procedures and Limits for Components of Vehicles, Boats (up to 15 m), and Machines (Except Aircraft) (16.6 Hz to 18 GHz) |
| IEEE/ANSI C63.25.1-2018 | American National Standard Validation Methods for Radiated Emission Test Sites, 1 GHz to 18 GHz |
| IEEE/ANSI C63.30-2021 | American National Standard for Methods of Measurements of Radio-Frequency Emissions from Wireless Power Transfer Equipment |
| ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
| IEEE 149-1977 | IEEE Standard Test Procedures for Antennas |
| ISO/IEC Guide 98:1993 | Guide to the expression of uncertainty in measurement (GUM) |
| CISPR 16-1-4:2010+AMD1:2012+AMD2:2017 CSV | Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-4: Radio disturbance and immunity measuring apparatus - Antennas and test sites for radiated disturbance measurements |
| ANSI/NCSL Z540 3 : 2006(R2013) | REQUIREMENTS FOR THE CALIBRATION OF MEASURING AND TEST EQUIPMENT |
| ISO/TS 21749:2005 | Measurement uncertainty for metrological applications — Repeated measurements and nested experiments |
| IEEE/ANSI C63.4-2014 | American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz |
| IEEE/ANSI C63.23-2012 | American National Standard Guide for Electromagnetic Compatibility—Computations and Treatment of Measurement Uncertainty |
| IEEE/ANSI C63.14-2014 REDLINE | American National Standard Dictionary of Electromagnetic Compatibility (EMC) including Electromagnetic Environmental Effects (E3) |
| MIL-STD-461 Revision G:2015 | REQUIREMENTS FOR THE CONTROL OF ELECTROMAGNETIC INTERFERENCE CHARACTERISTICS OF SUBSYSTEMS AND EQUIPMENT |
| CISPR 16-2-3:2016 | Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-3: Methods of measurement of disturbances and immunity - Radiated disturbance measurements |
| ISO 21748:2017 | Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty evaluation |
| TR 102 273-4 : 1.2.1 | ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); IMPROVEMENT ON RADIATED METHODS OF MEASUREMENT (USING TEST SITE) AND EVALUATION OF THE CORRESPONDING MEASUREMENT UNCERTAINTIES; PART 4: OPEN AREA TEST SITE |
| IEEE/ANSI C63.7-2015 | American National Standard Guide for Construction of Test Sites for Performing Radiated Emission Measurements |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.