Skip to content
Please enter a keyword to search

  • IEEE C57.12.90-2010

    View superseded by
    Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
    View superseded by

    IEEE Standard Test Code for Liquid-Immersed Distribution, Power, and Regulating Transformers

    Available format(s):  PDF

    Superseded date:  07-04-2021

    Language(s):  English

    Published date:  15-10-2010

    Publisher:  Institute of Electrical & Electronics Engineers

    Add To Cart

    Abstract - (Show below) - (Hide below)

    Specifies methods for performing tests specified in IEEE Std C57.12.00 and other standards applicable to liquid-immersed distribution, power, and regulating transformers.

    General Product Information - (Show below) - (Hide below)

    Committee Transformers
    Development Note Supersedes IEEE DRAFT C57.12.90. (08/2004)
    Document Type Standard
    Publisher Institute of Electrical & Electronics Engineers
    Status Superseded
    Superseded By
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    IEEE C57.12.10-2010 REDLINE IEEE Standard Requirements for Liquid-Immersed Power Transformers
    IEEE 141 : 1993 IEEE Recommended Practice for Electric Power Distribution for Industrial Plants
    IEEE C57.12.10-2010 TRANSFORMERS - 230 KV AND BELOW 833/958 THROUGH 8333/10 417 KVA, SINGLE-PHASE, AND 750/862 THROUGH 60 000/80 000/100 000 KVA, THREE-PHASE WITHOUT LOAD TAP CHANGING; AND 3750/4687 THROUGH 60 000/80 000/100 000 KVA WITH LOAD TAP CHANGING - SAFETY REQUIREMENT
    IEEE DRAFT C57.123 : D1.7 OCT 2000 DRAFT GUIDE FOR TRANSFORMER LOSS MEASUREMENT
    IEEE C57.21 : 2008 REQUIREMENTS, TERMINOLOGY, AND TEST CODE FOR SHUNT REACTORS RATED OVER 500 KVA
    BS EN 61803 : 1999 DETERMINATION OF POWER LOSSES IN HIGH-VOLTAGE DIRECT CURRENT (HVDC) CONVERTER STATIONS WITH LINE-COMMUTATED CONVERTERS (IEC 61803:1999)
    IEEE 487.3-2014 IEEE Standard for the Electrical Protection of Communication Facilities Serving Electric Supply Locations Through the Use of Hybrid Facilities
    CEI 14-43 : 2011 GUIDE FOR THE APPLICATION, SPECIFICATION, AND TESTING OF PHASE-SHIFTING TRANSFORMERS
    IEEE DRAFT C57.19.01 : D7 MAY 99 DRAFT STANDARD PERFORMANCE CHARACTERISTICS AND DIMENSIONS FOR OUTDOOR POWER APPARATUS BUSHINGS
    IEEE DRAFT C57.12.40 : D4 2006 SECONDARY NETWORK TRANSFORMERS, SUBWAY AND VAULT TYPES (LIQUID IMMERSED)
    IEEE 1313-1993 IEEE Standard for Power Systems - Insulation Coordination
    IEEE C57.12.11-1980 IEEE Guide for Installation of Oil-Immersed Transformers (10 MVA and Larger, 69-287 kV Rating)
    IEEE C57.12.38-2014 IEEE Standard for Pad-Mounted-Type, Self-Cooled, Single-Phase Distribution Transformers 250 kVA and Smaller: High Voltage, 34 500 GrdY/19 920 V and Below; Low Voltage, 480/240 V and Below
    CSA C88.1 : 1996 : R2015 POWER TRANSFORMERS AND REACTOR BUSHINGS
    ANSI C92.1 : 1982 POWER SYSTEMS - INSULATION COORDINATION
    IEEE C57.154-2012 IEEE Standard for the Design, Testing, and Application of Liquid-Immersed Distribution, Power, and Regulating Transformers Using High-Temperature Insulation Systems and Operating at Elevated Temperatures
    IEEE C57.32-2015 IEEE Standard for Requirements, Terminology, and Test Procedures for Neutral Grounding Devices
    IEEE DRAFT C57.12.36 : D10 2006 REQUIREMENTS FOR LIQUID-IMMERSED DISTRIBUTION SUBSTATION TRANSFORMERS
    IEEE DRAFT C57.16 : D10 AUG 95 TERMINOLOGY AND TEST CODE FOR DRY-TYPE AIR-CORE SERIES CONNECTED REACTORS
    CSA Z463 : 2013 GUIDELINE ON MAINTENANCE OF ELECTRICAL SYSTEMS
    I.S. EN 61181:2007 MINERAL OIL-FILLED ELECTRICAL EQUIPMENT - APPLICATION OF DISSOLVED GAS ANALYSIS (DGA) TO FACTORY TESTS ON ELECTRICAL EQUIPMENT (IEC 61181:2007 (EQV))
    IEEE C57.123-2010 REDLINE IEEE Guide for Transformer Loss Measurement
    IEEE DRAFT C57.12.21 : D12 MAY 92 DRAFT REQUIREMENTS FOR PAD-MOUNTED, COMPARTMENTAL-TYPE, SELF-COOLED, SINGLE-PHASE DISTRIBUTION TRANSFORMERS WITH HIGH VOLTAGE BUSHINGS; HIGH VOLTAGE, 34500 GRDY/19920 VOLTS AND BELOW; LOW VOLTAGE, 240/120 VOLTS; 16 KVA AND SMALLER
    IEEE DRAFT 62 : 200D8 GUIDE FOR DIAGNOSTIC FIELD TESTING OF ELECTRIC POWER APPARATUS
    IEEE DRAFT C57.12.00 : D4 98 DRAFT STANDARD GENERAL REQUIREMENTS FOR LIQUID-IMMERSED DISTRIBUTION, POWER, AND REGULATING TRANSFORMERS
    CSA C2 : 0 SINGLE-PHASE AND THREE-PHASE DISTRIBUTION TRANSFORMERS, TYPES ONAN AND LNAN
    IEEE DRAFT 1147 : D8 2005 GUIDE FOR THE REHABILITATION OF HYDROELECTRIC POWER PLANTS
    IEEE C57.12.20-2011 REDLINE IEEE Standard for Overhead-Type Distribution Transformers 500 kVA and Smaller: High Voltage, 34 500 V and Below; Low Voltage, 7970/13 800Y V and Below
    IEEE C57.110-2008 REDLINE IEEE Recommended Practice for Establishing Liquid-Filled and Dry-Type Power and Distribution Transformer Capability When Supplying Nonsinusoidal Load Currents
    ASME PTC22 : 2014 GAS TURBINES
    ASME PTC19.6:2018(R2023) Electrical Power Measurements
    IEEE DRAFT C57.110 : D7 FEB 98 DRAFT RECOMMENDED PRACTICE FOR ESTABLISHING TRANSFORMER CAPABILITY WHEN SUPPLYING NONSINUSOIDAL LOAD CURRENTS
    16/30336914 DC : 0 BS EN 60076-57-129 ED 1.0 - CONVERTOR TRANSFORMERS - PART 57-129: TRANSFORMERS FOR HVDC APPLICATIONS
    CSA C22.3 No. 61936-1 : 2008 : R2015 POWER INSTALLATIONS EXCEEDING 1 KV A.C. - PART 1: COMMON RULES
    IEEE C57.98-2011 IEEE Guide for Transformer Impulse Tests
    IEEE C57.19.01-2000 IEEE Standard Performance Characteristics and Dimensions for Outdoor Apparatus Bushings
    CSA C227.3 : 2006 LOW-PROFILE, SINGLE-PHASE, PAD-MOUNTED DISTRIBUTION TRANSFORMERS WITH SEPARABLE INSULATED HIGH-VOLTAGE CONNECTORS
    IEEE C37.302-2015 IEEE Guide for Fault Current Limiter (FCL) Testing of FCLs Rated above 1000 V AC
    IEEE DRAFT C57.130 : D17 2006 GUIDE FOR THE USE OF DISSOLVED GAS ANALYSIS DURING FACTORY TEMPERATURE RISE TESTS FOR THE EVALUATION OF OIL-IMMERSED TRANSFORMERS AND REACTORS
    ANSI C57.12.25 : 1990 TRANSFORMERS - PAD-MOUNTED, COMPARTMENTAL-TYPE, SELF-COOLED, SINGLE-PHASE DISTRIBUTION TRANSFORMERS WITH SEPARABLE INSULATED HIGH-VOLTAGE CONNECTORS; HIGH VOLTAGE, 34 500 GRDY/19 920 VOLTS AND BELOW; LOW VOLTAGE, 240/120 VOLTS; 167 KVA AND SMALLER - REQUIREMENTS
    IEEE C57.12.37-2015 REDLINE IEEE Standard for the Electronic Reporting of Distribution Transformer Test Data
    IEEE DRAFT C57.93 : D13 2005 INSTALLATION AND MAINTENANCE OF LIQUID-IMMERSED POWER TRANSFORMERS
    CSA C22.3 No. 61936-1 : 2008 POWER INSTALLATIONS EXCEEDING 1 KV A.C. - PART 1: COMMON RULES
    ANSI C57.12.24 : 2009 TRANSFORMERS - UNDERGROUND-TYPE THREE-PHASE DISTRIBUTION TRANSFORMERS, 2500 KVA AND SMALLER; HIGH VOLTAGE, 34 500 GRDY/19 920 VOLTS AND BELOW; LOW VOLTAGE, 480 VOLTS AND BELOW - REQUIREMENTS
    IEEE DRAFT C57.12.26 : 1992 PAD-MOUNTED, COMPARTMENTAL-TYPE, SELF-COOLED, THREE-PHASE DISTRIBUTION TRANSFORMERS FOR USE WITH SEPARABLE INSULATED HIGH-VOLTAGE CONNECTORS, 34 500 GRDY/19 920 V AND BELOW; 2500 KVA AND SMALLER
    I.S. EN 61803:1999 DETERMINATION OF POWER LOSSES IN HIGH-VOLTAGE DIRECT CURRENT (HVDC) CONVERTER STATIONS WITH LINE COMMUTATED CONVERTERS
    NEMA EW 1-1988 (R1994, R1999, R2004) Electric Arc-Welding Power Sources
    NEMA EW 3:1983(R2002) Semi-Automatic Wire-Feed Systems for Arc Welding
    NEMA EW 7 : 1989 ELECTRICAL ARC WELDING POWER SOURCES FOR THE NON-PROFESSIONAL OPERATOR
    ANSI C57.12.27 : 1982 LIQUID-FILLED DISTRIBUTION TRANSFORMERS USED IN PAD-MOUNTED INSTALLATIONS INCLUDING UNIT SUBSTATIONS CONFORMANCE STANDARD FOR,
    NEMA TP 2-2005 STANDARD TEST METHOD FOR MEASURING THE ENERGY CONSUMPTION OF DISTRIBUTION TRANSFORMERS
    ANSI C57.12.13 : 1982 LIQUID-FILLED TRANSFORMERS USED IN UNIT INSTALLATIONS INCLUDING UNIT SUBSTATIONS, CONFORMANCE STANDARD FOR
    NEMA TR1 : 2013 TRANSFORMERS, STEP VOLTAGE REGULATORS AND REACTORS
    IEEE C57.15-2009 REDLINE IEEE Standard Requirements, Terminology, and Test Code for Step-Voltage Regulators
    IEEE C57.130-2015 IEEE Guide for the Use of Dissolved Gas Analysis Applied to Factory Temperature Rise Tests for the Evaluation of Mineral Oil-Immersed Transformers and Reactors
    IEEE DRAFT C57.12.23 : 1992 TRANSFORMERS - UNDERGROUND-TYPE, SELF-COOLED, SINGLE-PHASE DISTRIBUTION TRANSFORMERS WITH SEPARABLE, INSULATED, HIGH-VOLTAGE CONNECTORS; HIGH VOLTAGE (24 940 GRDY/14 400 V AND BELOW) AND LOW VOLTAGE (240/120 V, 167 KVA AND SMALLER)
    IEEE C57.131-2012 IEEE Standard Requirements for Tap Changers
    CEI EN 61803 : 2011 DETERMINATION OF POWER LOSSES IN HIGH-VOLTAGE DIRECT CURRENT (HVDC) CONVERTER STATIONS
    UFC 3-550-01 : CHANGE 1 UNIFIED FACILITIES CRITERIA - EXTERIOR ELECTRICAL POWER DISTRIBUTION
    IEEE C57.100-2011 IEEE Standard Test Procedure for Thermal Evaluation of Insulation Systems for Liquid-Immersed Distribution and Power Transformers
    IEEE 487.2-2013 IEEE Standard for the Electrical Protection of Communication Facilities Serving Electric Supply Locations through the Use of Optical Fiber Systems
    IEEE C57.12.70-2011 IEEE Standard for Standard Terminal Markings and Connections for Distribution and Power Transformers
    IEEE DRAFT 1276 : D6.0 DEC 96 DRAFT TRIAL USE GUIDE FOR THE APPLICATION OF HIGH TEMPERATURE INSULATION MATERIALS IN LIQUID-IMMERSED POWER TRANSFORMERS
    IEEE 1861-2014 IEEE Guide for On-Site Acceptance Tests of Electrical Equipment and System Commissioning of 1000 kV AC and Above
    IEEE DRAFT C37.91 : D7.0 2006 PROTECTING POWER TRANSFORMERS
    CSA C227.4 : 2006 THREE-PHASE, PAD-MOUNTED DISTRIBUTION TRANSFORMERS WITH SEPARABLE INSULATED HIGH-VOLTAGE CONNECTORS
    CSA C802.3 : 2015 MINIMUM EFFICIENCY VALUES FOR POWER TRANSFORMERS
    CSA C2.2:2006 : R2011 POLE-MOUNTED, SINGLE-PHASE DISTRIBUTION TRANSFORMERS FOR ELECTRIC UTILITIES
    IEEE C57.12.24-2009 IEEE Standard for Submersible, Three-Phase Transformers, 3750 kVA and Smaller: High Voltage, 34 500 GrdY/19 920 Volts and Below; Low Voltage, 600 Volts and Below
    IEEE 638-2013 IEEE Standard for Qualification of Class 1E Transformers for Nuclear Power Generating Stations
    CSA C2.1 : 2006 SINGLE-PHASE AND THREE-PHASE LIQUID-FILLED DISTRIBUTION TRANSFORMERS
    IEEE DRAFT C57.18.10 : D12 APR 97 DRAFT PRACTICES AND REQUIREMENTS FOR SEMICONDUCTOR POWER RECTIFIER TRANSFORMER
    CSA C88.1 : 1996 : R2005 POWER TRANSFORMERS AND REACTOR BUSHINGS
    ANSI C57.12.40 : 2011 AMERICAN NATIONAL STANDARD FOR SECONDARY NETWORK TRANSFORMERS - SUBWAY AND VAULT TYPES (LIQUID IMMERSED) - REQUIREMENTS
    CAN/CSA-C2.1-06 (R2017) Single-Phase and Three-Phase Liquid-Filled Distribution Transformers
    CSA C802.1 : 2013 MINIMUM EFFICIENCY VALUES FOR LIQUID-FILLED DISTRIBUTION TRANSFORMERS
    IEEE 95-2002 IEEE Recommended Practice for Insulation Testing of AC Electric Machinery (2300 V and Above) With High Direct Voltage
    IEC/IEEE 60076-57-129:2017 Power transformers - Part 57-129: Transformers for HVDC applications
    IEEE C57.12.23-2009 IEEE Standard for Submersible Single-Phase Transformers: 167 kVA and Smaller; High Voltage 25 000 V and Below; Low Voltage 600 V and Below
    IEEE C57.17-2012 IEEE Standard Requirements for Arc Furnace Transformers
    BS IEC 60076-21:2011 Power transformers Standard requirements, terminology, and test code for step-voltage regulators
    IEEE C57.12.36-2007 IEEE Standard Requirements for Liquid-Immersed Distribution Substation Transformers
    IEC 60076-21:2011 Power transformers - Part 21: Standard requirements, terminology, and test code for step-voltage regulators
    IEC 62032:2012 Guide for the Application, Specification and Testing of Phase-Shifting Transformers
    IEEE 3001.5-2013 IEEE Recommended Practice for the Application of Power Distribution Apparatus in Industrial and Commercial Power Systems
    IEEE 464 : 1981 GROUNDED 830 V THREE-PHASE ELECTRICAL SYSTEM FOR OIL FIELD SERVICE, RECOMMENDED PRACTICE FOR
    IEEE C57.158-2017 IEEE Guide for the Application of Tertiary and Stabilizing Windings in Power Transformers
    IEEE 1276-1997 IEEE Guide for the Application of High-Temperature Insulation Materials in Liquid-Immersed Power Transformers
    MIL-T-82402 Base Document:1965 TRANSFORMER, DRY-TYPE, POWER DISTRIBUTION, STEP UP AND STEP DOWN SERVICE, 1000 KVA AND BELOW
    IEEE C57.16-2011 IEEE Standard for Requirements, Terminology, and Test Code for Dry-Type Air-Core Series-Connected Reactors
    BS EN 60076-1:2011 Power transformers General
    CAN/CSA-C227.3-06 (R2017) Low-profile, single-phase, pad-mounted distribution transformers with separable insulated high-voltage connectors
    CSA C2.2 : 2006 POLE-MOUNTED, SINGLE-PHASE DISTRIBUTION TRANSFORMERS FOR ELECTRIC UTILITIES
    IEEE C57.152-2013 IEEE Guide for Diagnostic Field Testing of Fluid-Filled Power Transformers, Regulators, and Reactors
    CSA C227.4 : 2006 : R2017 THREE-PHASE, PAD-MOUNTED DISTRIBUTION TRANSFORMERS WITH SEPARABLE INSULATED HIGH-VOLTAGE CONNECTORS
    CSA C227.5 : 2008 : R2013 THREE-PHASE LIVE-FRONT PAD-MOUNTED DISTRIBUTION TRANSFORMERS
    C22.2 NO. 213-17 Nonincendive electrical equipment for use in Class I and II, Division 2 and Class III, Divisions 1 and 2 hazardous (classified) locations (Binational standard with UL 121201)
    IEEE C57.159-2016 IEEE Guide on Transformers for Application in Distributed Photovoltaic (DPV) Power Generation Systems
    CSA C227.3 : 2006 : R2011 LOW-PROFILE, SINGLE-PHASE, PAD-MOUNTED DISTRIBUTION TRANSFORMERS WITH SEPARABLE INSULATED HIGH-VOLTAGE CONNECTORS
    IEEE 45.1-2017 IEEE Recommended Practice for Electrical Installations on Shipboard--Design
    ANSI C57.17 : 2012 ARC FURNACE TRANSFORMERS, REQUIREMENTS FOR,
    IEEE C57.125-2015 IEEE Guide for Failure Investigation, Documentation, Analysis, and Reporting for Power Transformers and Shunt Reactors
    IEEE 295 : 1969 STANDARD FOR ELECTRONIC POWER TRANSFORMERS
    IEEE C57.91-2011 REDLINE IEEE Guide for Loading Mineral-Oil-Immersed Transformers and Step-Voltage Regulators
    IEEE 62-1995 IEEE Guide for Diagnostic Field Testing of Electric Power Apparatus - Part 1: Oil Filled Power Transformers, Regulators, and Reactors
    IEEE 421B-1979 IEEE Standard for High-Potential-Test Requirements for Excitation Systems for Synchronous Machines
    IEEE C57.12.40-2011 IEEE Standard for Network, Three-Phase Transformers, 2500 kVA and Smaller; High Voltage, 34 500 GrdY/19 920 and Below; Low Voltage, 600 V and Below; Subway and Vault Types (Liquid Immersed)
    IEEE C57.136 : 2000 IEEE GUIDE FOR SOUND LEVEL ABATEMENT AND DETERMINATION FOR LIQUID-IMMERSED POWER TRANSFORMERS AND SHUNT REACTORS RATED OVER 500 KVA
    IEEE C57.12.34-2015 REDLINE IEEE Standard Requirements for Pad-Mounted, Compartmental-Type, Self-Cooled, Three-Phase Distribution Transformers, 10 MVA and Smaller; High-Voltage, 34.5 kV Nominal System Voltage and Below; Low-Voltage, 15 kV Nominal System Voltage and Below
    BS EN 61181 : 2007 MINERAL OIL-FILLED ELECTRICAL EQUIPMENT - APPLICATION OF DISSOLVED GAS ANALYSIS (DGA) TO FACTORY TESTS ON ELECTRICAL EQUIPMENT
    CEI EN 60076-1 : 2015 POWER TRANSFORMERS - PART 1: GENERAL
    IEEE C57.19.04-2018 IEEE Standard for Performance Characteristics and Dimensions for High Current Power Transformer Bushings with Rated Continuous Current in Excess of 5000 A in Bus Enclosures
    EN 61803:1999/A2:2016 DETERMINATION OF POWER LOSSES IN HIGH-VOLTAGE DIRECT CURRENT (HVDC) CONVERTER STATIONS WITH LINE COMMUTATED CONVERTERS (IEC 61803:1999/A2:2016)
    IEEE C57.12.20-2011 TRANSFORMERS - STANDARD FOR OVERHEAD TYPE DISTRIBUTION TRANSFORMERS, 500 KVA AND SMALLER: HIGH VOLTAGE, 34500 VOLTS AND BELOW: LOW VOLTAGE, 7970/13800Y VOLTS AND BELOW
    IEEE C57.106-2006 IEEE Guide for Acceptance and Maintenance of Insulating Oil in Equipment
    IEEE 1147-2005 IEEE Guide for the Rehabilitation of Hydroelectric Power Plants
    UNE-EN 60076-1:2013 Power transformers - Part 1: General
    UL 121201:9ED 2017-09 Nonincendive Electrical Equipment for Use in Class I and II, Division 2 and Class III, Divisions 1 and 2 Hazardous (Classified) Locations
    IEC 61803:1999+AMD1:2010+AMD2:2016 CSV Determination of power losses in high-voltage direct current (HVDC)converter stations with line-commutated converters
    IEC 60076-1:2011 Power transformers - Part 1: General
    IEC 61181:2007+AMD1:2012 CSV Mineral oil-filled electrical equipment - Application of dissolved gas analysis (DGA) to factory tests on electrical equipment
    FM 3990 : 2018 LESS OR NONFLAMMABLE LIQUID-INSULATED TRANSFORMERS
    IEEE C57.12.00-2015 IEEE Standard for General Requirements for Liquid-Immersed Distribution, Power, and Regulating Transformers
    IEEE C57.138-1998 IEEE Recommended Practice for Routine Impulse Test for Distribution Transformers
    IEEE DRAFT C57.12.22 : D4 JUL 93 PAD-MOUNTED, COMPARTMENTAL-TYPE, SELF COOLED THREE PHASE DISTRIBUTION TRANSFORMERS WITH HIGH-VOLTAGE BUSHINGS, 2500 KVA AND SMALLER: HIGH VOLTAGE, 34 500 GRDY/19 920 VOLTS AND BELOW; LOW VOLTAGE, 480 VOLTS AND BELOW
    IEEE 1653.1-2016 IEEE Standard for Traction Power Rectifier Transformers for Substation Applications up to 1500 V DC Nominal Output
    IEEE C57.119-2001 IEEE Recommended Practice for Performing Temperature Rise Tests on Oil-Immersed Power Transformers at Loads Beyond Nameplate Ratings
    CSA C2.1 : 2006 : R2011 SINGLE-PHASE AND THREE-PHASE LIQUID-FILLED DISTRIBUTION TRANSFORMERS
    CSA C88.1 : 1996 : R2011 POWER TRANSFORMERS AND REACTOR BUSHINGS
    CAN/CSA-C2.2-06 (R2017) Pole-Mounted, Single-Phase Distribution Transformers for Electric Utilities
    CSA C227.5:2008 THREE-PHASE LIVE-FRONT PAD-MOUNTED DISTRIBUTION TRANSFORMERS
    CSA C227.4 : 2006 : R2011 THREE-PHASE, PAD-MOUNTED DISTRIBUTION TRANSFORMERS WITH SEPARABLE INSULATED HIGH-VOLTAGE CONNECTORS
    C88-16 Power transformers and reactors
    IEEE 1277-2010 IEEE Standard General Requirements and Test Code for Dry-Type and Oil-Immersed Smoothing Reactors for DC Power Transmission
    IEEE C57.93-2007 IEEE Guide for Installation and Maintenance of Liquid-Immersed Power Transformers
    IEEE 1590-2009 REDLINE IEEE Recommended Practice for the Electrical Protection of Communication Facilities Serving Electric Supply Locations Using Optical Fiber Systems
    IEEE C57.135-2011 IEEE Guide for the Application, Specification, and Testing of Phase-Shifting Transformers
    IEEE C57.129-2007 REDLINE IEEE Standard for General Requirements and Test Code for Oil-Immersed HVDC Converter Transformers
    IEEE 1585 : 2002 FUNCTIONAL SPECIFICATION OF MEDIUM VOLTAGE (1-35 KV) ELECTRONIC SERIES DEVICES FOR COMPENSATION OF VOLTAGE FLUCTUATIONS
    IEEE C57.143-2012 IEEE Guide for Application for Monitoring Equipment to Liquid-Immersed Transformers and Components
    IEEE 1388-2000 IEEE Standard for the Electronic Reporting of Transformer Test Data
    IEEE 1623-2004 IEEE Guide for the Functional Specification of Medium Voltage (1 kV - 35 kV) Electronic Shunt Devices for Dynamic Voltage Compensation
    I.S. EN 60076-1:2011 POWER TRANSFORMERS - PART 1: GENERAL (IEC 60076-1:2011)
    IEEE C57.156-2016 IEEE Guide for Tank Rupture Mitigation of Liquid-Immersed Power Transformers and Reactors
    IEEE DRAFT C57.12.80 : D3 DEC 2000 DRAFT STANDARD TERMINOLOGY FOR POWER AND DISTRIBUTION
    IEEE DRAFT C57.12.20 : D10C 2004 OVERHEAD TYPE DISTRIBUTION TRANSFORMERS, 500 KVA AND SMALLER: HIGH VOLTAGE, 34 500 VOLTS AND BELOW; LOW VOLTAGE, 7970/13 800Y VOLTS AND BELOW
    EN 61181:2007/A1:2012 MINERAL OIL-FILLED ELECTRICAL EQUIPMENT - APPLICATION OF DISSOLVED GAS ANALYSIS (DGA) TO FACTORY TESTS ON ELECTRICAL EQUIPMENT (IEC 61181:2007/A1:2012)
    EN 60076-1:2011 POWER TRANSFORMERS - PART 1: GENERAL (IEC 60076-1:2011)
    IEEE C57.12.00-2010 REDLINE IEEE Standard for General Requirements for Liquid-Immersed Distribution, Power, and Regulating Transformers
    IEEE C57.12.34-2009 IEEE Standard Requirements for Pad-Mounted, Compartmental-Type, Self-Cooled, Three-Phase Distribution Transformers, 5 MVA and Smaller; High Voltage, 34.5 kV Nominal System Voltage and Below; Low Voltage, 15 kV Nominal System Voltage & Below
    IEEE C57.12.80-2010 IEEE Standard Terminology for Power and Distribution Transformers
    IEEE C57.113-2010 REDLINE IEEE Recommended Practice for Partial Discharge Measurement in Liquid-Filled Power Transformers and Shunt Reactors

    Standards Referencing This Book - (Show below) - (Hide below)

    IEEE/ANSI C57.12.22-1995 American National Standard for Pad-Mounted, Compartmental-Type, Self-Cooled, Three-Phase Distribution Transformers With High-Voltage Bushings, 2500 kVA and Smaller; High Voltage, 34 500 GrdY/19 920 Volts and Below; Low Voltage, 480 Volts and Below
    IEEE 4-1995 IEEE Standard Techniques for High-Voltage Testing
    IEEE C57.12.20-2005 Standard for Overhead Type Distribution Transformers, 500 kVA and Smaller: High Voltage, 34500 Volts and Below; Low Voltage, 7970/13800Y Volts and Below
    IEEE C57.12.00-2010 REDLINE IEEE Standard for General Requirements for Liquid-Immersed Distribution, Power, and Regulating Transformers
    IEEE C63.2-2009 American National Standard for Electromagnetic Noise and Field Strength Instrumentation, 10 Hz to 40 GHz Specifications
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective