• Shopping Cart
    There are no items in your cart

IEEE DRAFT 802.1AB : D13 2004

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by

LOCAL AND METROPOLITAN NETWORKS: STATION AND MEDIA ACCESS CONTROL CONNECTIVITY DISCOVERY

Superseded date

06-05-2005

Superseded by

IEEE 802.1AB-2009

Published date

12-01-2013

Sorry this product is not available in your region.

1. Overview
    1.1 Scope
    1.2 Purpose
2. References
3. Definitions and numerical representation
    3.1 Definitions
    3.2 Numerical representation
4. Acronyms and abbreviations
5. Conformance
    5.1 Terminology
    5.2 Required capabilities
    5.3 Optional capabilities
6. Architectural overview
7. Principles of operation
    7.1 LLDP operational modes
    7.2 Connectivity and management information
    7.3 Optional information categories
    7.4 LLDP design principles
    7.5 TLV selection
    7.6 Transmission principles
    7.7 Reception principles
    7.8 Relationship between LLDP and IETF MIBs
8. LLDPDU transmission, reception, and addressing
    8.1 Destination address
    8.2 Source address
    8.3 Ethertype use and encoding
    8.4 LLDPDU reception
9. LLDPDU and TLV formats
    9.1 LLDPDU bit and octet ordering conventions
    9.2 LLDPDU format
    9.3 TLV categories
    9.4 Basic TLV format
    9.5 Basic management TLV set formats and definitions
    9.6 Organizationally Specific TLVs
10. The protocol.
    10.1 Protocol initialization
    10.2 Frame transmission
    10.3 Frame reception
    10.4 Notational conventions used in state diagrams
    10.5 State machines
11. LLDP management
    11.1 Data storage and retrieval
    11.2 The LLDP manager's responsibilities
    11.3 Managed objects
    11.4 Data types
    11.5 LLDP variables
12. LLDP MIB definitions
    12.1 LLDP MIB design philosophy
    12.2 LLDP MIB module
    12.3 Security considerations for LLDP base MIB module
Annex A Bibliography (informative)
Annex B PICS Proforma (normative)
    B.1 Introduction
    B.2 Abbreviations and special symbols
    B.3 Instructions for completing the PICS proforma
    B.4 Major capabilities and options
Annex C PTOPO MIB update (informative)
Annex D Example LLDP transmission frame formats (informative)
    D.1 Direct-encoded LLDP frame format
    D.2 SNAP-encoded LLDP frame format
Annex E Using LLDP to detect potential communication problems
    E.1 Overview
    E.2 IEEE 802.1 Organizationally Specific TLVs
    E.3 IEEE 802.3 Organizationally Specific TLVs
Annex F IEEE 802.1 Organizationally Specific TLVs (normative)
    F.1 Requirements of the IEEE 802.1 Organizationally Specific
         TLV set
    F.2 Port VLAN ID TLV
    F.3 Port And Protocol VLAN ID TLV
    F.4 VLAN Name TLV
    F.5 Protocol Identity TLV
    F.6 IEEE 802.1 Organizationally Specific TLV management
    F.7 IEEE 802.1/LLDP extension MIB
    F.8 PICS proforma for IEEE 802.1 Organizationally
         Specific TLV extensions
Annex G IEEE 802.3 Organizationally Specific TLVs (normative)
    G.1 Requirements of the IEEE 802.3 Organizationally Specific
         TLV set
    G.2 MAC/PHY Configuration/Status TLV
    G.3 Power Via MDI TLV
    G.4 Link Aggregation TLV
    G.5 Maximum Frame Size TLV
    G.6 IEEE 802.3 Organizationally Specific TLV selection
         management
    G.7 IEEE 802.1/LLDP extension MIB
    G.8 PICS proforma for IEEE 802.3 TLV extensions

Defines a protocol and management elements, suitable for advertising information to stations attached to the same 802 LAN, for the purpose of populating physical topology and device discovery management information databases.

DocumentType
Draft
PublisherName
Institute of Electrical & Electronics Engineers
Status
Superseded
SupersededBy

IEC PAS 62411:2005 Real-time Ethernet PROFINET IO

IEEE 802.1X-2010 IEEE Standard for Local and metropolitan area networks--Port-Based Network Access Control
IEEE 802-2014 IEEE Standard for Local and Metropolitan Area Networks: Overview and Architecture
IEEE 802.3-2012 IEEE Standard for Ethernet
IEEE 802.1Q-2014 IEEE Standard for Local and metropolitan area networks--Bridges and Bridged Networks
IEEE 802A : 2003 LOCAL AND METROPOLITAN AREA NETWORKS: OVERVIEW AND ARCHITECTURE - AMENDMENT 1: ETHERTYPES FOR PROTOTYPE AND VENDOR-SPECIFIC PROTOCOL DEVELOPMENT
IEEE 802.1D-2004 IEEE Standard for Local and metropolitan area networks: Media Access Control (MAC) Bridges
IEEE 802.3AE : 2002 INFORMATION TECHNOLOGY - TELECOMMUNICATIONS AND INFORMATION EXCHANGE BETWEEN SYSTEMS - LOCAL AND METROPOLITAN AREA NETWORKS - SPECIFIC REQUIREMENTS - PART 3: CARRIER SENSE MULTIPLE ACCESS WITH COLLISION DETECTION (CSMA/CD) ACCESS METHOD AND PHYSICAL LAYER SPECIFICATIONS - AMENDMENT: MEDIA ACCESS CONTROL (MAC) PARAMETERS, PHYSICAL LAYERS, AND MANAGEMENT PARAMETERS FOR 10 GB/S OPERATION
ISO/IEC 8824-1:2015 Information technology Abstract Syntax Notation One (ASN.1): Specification of basic notation Part 1:
IEEE 802.3AF : 2003 INFORMATION TECHNOLOGY - TELECOMMUNICATIONS AND INFORMATION EXCHANGE BETWEEN SYSTEMS - LOCAL AND METROPOLITAN AREA NETWORKS - SPECIFIC REQUIREMENTS - PART 3: CARRIER SENSE MULTIPLE ACCESS WITH COLLISION DETECTION (CSMA/CD) ACCESS METHOD AND PHYSICAL LAYER SPECIFICATIONS - AMENDMENT: DATA TERMINAL EQUIPMENT (DTE) POWER VIA MEDIA DEPENDENT INTERFACE (MDI)

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.