IES LM 79 : 2008
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
ELECTRICAL AND PHOTOMETRIC MEASUREMENTS OF SOLID-STATE LIGHTING PRODUCTS
Hardcopy , PDF
01-06-2019
English
01-01-2008
1.0 Introduction
2.0 Ambient Conditions
3.0 Power Supply Characteristics
4.0 Seasoning of SSL Product
5.0 Stabilization of SSL Product
6.0 Operating Orientation
7.0 Electrical Settings
8.0 Electrical Instrumentation
9.0 Test Methods for Total Luminous Flux measurement
10.0 Luminous Intensity Distribution.
11.0 Luminous Efficacy.
12.0 Test Methods for Color Characteristics of SSL Products
13.0 Uncertainty statement
14.0 Test Report
References
Annex (Informative)
Specifies approved method for performing reproducible measurements of total luminous flux, electrical power, luminous intensity distribution and chromaticity of solid-state lighting (SSL) products for illumination purposes under standard conditions.
DevelopmentNote |
Also available in French translation, see IES LM 79 FRENCH. Also available in Spanish translation, see IES LM 79 SPANISH. (10/2017)
|
DocumentType |
Standard
|
Pages |
23
|
PublisherName |
Illuminating Engineering Society
|
Status |
Superseded
|
SupersededBy |
CSA C653 : 2013(R2018) | PHOTOMETRIC PERFORMANCE OF ROADWAY AND STREET LIGHTING LUMINAIRES |
12/30263964 DC : 0 | BS EN 62717 - LED MODULES FOR GENERAL LIGHTING - PERFORMANCE REQUIREMENTS |
DD IEC/PAS 62717:2011 | LED modules for general lighting. Performance requirements |
CSA C870 : 2012 : INC : UPD 1:2013 | PERFORMANCE OF GENERAL SERVICE LAMPS |
BS EN 13032-4:2015 | Light and lighting. Measurement and presentation of photometric data of lamps and luminaires LED lamps, modules and luminaires |
EN 13032-4:2015 | Light and lighting - Measurement and presentation of photometric data of lamps and luminaires - Part 4: LED lamps, modules and luminaires |
MIL-DTL-16377 Revision J:2014 | Fixtures, Lighting; and Associated Parts; Shipboard Use, General Specification for |
CAN/CSA-C870-12 (R2017) | Performance of general service lamps |
SAE ARP6259 | LED Replacement for Incandescent/Halogen Bulbs or Fluorescent Lamps Transport Category Aircraft and Rotorcraft |
IEEE 802.15.7-2011 | IEEE Standard for Local and Metropolitan Area Networks--Part 15.7: Short-Range Wireless Optical Communication Using Visible Light |
CAN/CSA-C871-13 (R2018) | Performance of LED replacement lamps |
I.S. EN 62612:2013 | SELF-BALLASTED LED LAMPS FOR GENERAL LIGHTING SERVICES WITH SUPPLY VOLTAGES > 50 V - PERFORMANCE REQUIREMENTS |
IES HB 10 : 2011 | THE LIGHTING HANDBOOK |
NEMA LSD 68-2013 | REMOTE PHOSPHOR DEVICES USED IN LED LAMPS, ENGINES AND LUMINAIRES |
NEMA LSD 63 : 2012 | MEASUREMENT METHODS AND PERFORMANCE VARIATION FOR VERIFICATION TESTING OF GENERAL PURPOSE LAMPS AND SYSTEMS |
NEMA LSD 45:2009 | RECOMMENDATIONS FOR SOLID STATE LIGHTING SUB-ASSEMBLY INTERFACES FOR LUMINAIRES |
UFC 3-530-01 : Change 3 | UNIFIED FACILITIES CRITERIA - INTERIOR AND EXTERIOR LIGHTING SYSTEMS AND CONTROLS |
NEMA SSL 4:2012 | Retrofit Lamps—Minimum Performance Requirements |
NEMA LE 6:2014 | Procedure for Determining Target Efficacy Ratings for Commercial, Industrial, and Residential Luminaires |
NEMA LSD 51:2009 | SOLID STATE LIGHTING - DEFINITIONS FOR FUNCTIONAL AND DECORATIVE APPLICATIONS |
13/30282207 DC : 0 | BS EN 13032-4 - LIGHT AND LIGHTING - MEASUREMENT AND PRESENTATION OF PHOTOMETRIC DATA - PART 4: LED LAMPS, MODULES AND LUMINAIRES |
UNI 11356 : 2010 | LIGHT AND LIGHTING - PROTOCOL FOR THE MEASUREMENT OF LED LUMINAIRES PHOTOMETRIC DATA |
CSA C870:2012 | PERFORMANCE OF GENERAL SERVICE LAMPS |
CSA C811 : 2013 | PERFORMANCE OF HIGHMAST LUMINAIRES FOR ROADWAY LIGHTING |
IES TM 28 : 2014 | PROJECTING LONG-TERM LUMINOUS FLUX MAINTENANCE OF LED LAMPS AND LUMINAIRES |
IES RP 4 : 2013 | RECOMMENDED PRACTICE FOR LIBRARY LIGHTING |
IES LM 80 FRENCH : 2015 | MEASURING LUMINOUS FLUX AND COLOR MAINTENANCE OF LED PACKAGES, ARRAYS AND MODULES |
IES RP 30 : 2017 | RECOMMENDED PRACTICE FOR MUSEUM LIGHTING |
IES TM 16 : 2017 | SOLID STATE LIGHTING SOURCES AND SYSTEMS |
IES RP 7 : 2017 | RECOMMENDED PRACTICE FOR LIGHTING INDUSTRIAL FACILITIES |
IES LM 84 : 2014 | APPROVED METHOD: MEASURING LUMINOUS FLUX AND COLOR MAINTENANCE OF LED LAMPS, LIGHT ENGINES, AND LUMINAIRES |
IES LM 28 : 2012 | APPROVED METHOD: IES GUIDE FOR THE SELECTION, CARE AND USE OF ELECTRICAL INSTRUMENTS IN THE PHOTOMETRIC LABORATORY |
IES DG 1 : 2016 | DESIGN GUIDE FOR COLOR AND ILLUMINATION |
PD IEC/TS 62257-9-5:2016 | Recommendations for renewable energy and hybrid systems for rural electrification Integrated systems. Selection of stand-alone lighting kits for rural electrification |
BS EN 62612:2013+A2:2018 | Self-ballasted LED lamps for general lighting services with supply voltages > 50 V. Performance requirements |
IES LM 85 : 2014 | APPROVED METHOD: ELECTRICAL AND PHOTOMETRIC MEASUREMENTS OF HIGH-POWER LEDS |
SAE ARP1283B | Cargo Compartment Lighting for Transport Category Aircraft and Rotorcraft |
UNE-EN 62612:2014 | Self-ballasted LED lamps for general lighting services with supply voltages > 50 V - Performance requirements |
IEC PAS 62717:2011 | LED modules for general lighting - Performance requirements |
UNE-EN 13032-4:2016 | Light and lighting - Measurement and presentation of photometric data of lamps and luminaires - Part 4: LED lamps, modules and luminaires |
IES LM 80 : 2015 | MEASURING LUMINOUS FLUX AND COLOR MAINTENANCE OF LED PACKAGES, ARRAYS AND MODULES |
DIN EN 13032-4:2015-08 | LIGHT AND LIGHTING - MEASUREMENT AND PRESENTATION OF PHOTOMETRIC DATA OF LAMPS AND LUMINAIRES - PART 4: LED LAMPS, MODULES AND LUMINAIRES |
SAE AS5134A | Aviation Distress Signal |
15/30214840 DC : 0 | BS EN 62663-2 - NON-INTEGRATED LED LAMPS - PART 2: PERFORMANCE REQUIREMENTS |
I.S. EN 13032-4:2015 | LIGHT AND LIGHTING - LIGHT AND LIGHTING - MEASUREMENT AND PRESENTATION OF PHOTOMETRIC DATA OF LAMPS AND LUMINAIRES - PART 4: LED LAMPS, MODULES AND LUMINAIRES |
CAN/CSA-C875-13 (R2018) | Performance of general service directional lamps |
IES LM 82 : 2012 | CHARACTERIZATION OF LED LIGHT ENGINES AND LED LAMPS FOR ELECTRICAL AND PHOTOMETRIC PROPERTIES AS A FUNCTION OF TEMPERATURE |
IES LM 20 : 2013 | IES APPROVED METHOD FOR PHOTOMETRY OF REFLECTOR TYPE LAMPS |
EN 62612:2013/A11:2017/AC:2017-11 | SELF-BALLASTED LED LAMPS FOR GENERAL LIGHTING SERVICES WITH SUPPLY VOLTAGES > 50 V - PERFORMANCE REQUIREMENTS |
IES LM 46 : 2004 | PHOTOMETRIC TESTING OF INDOOR LUMINARIES USING HIGH INTENSITY DISCHARGE OR INCANDESCENT FILAMENT LAMPS |
IES LM 20 : 2013 | IES APPROVED METHOD FOR PHOTOMETRY OF REFLECTOR TYPE LAMPS |
IES LM 31 : 1995 | PHOTOMETRIC TESTING OF ROADWAY LUMINAIRES USING INCANDESCENT FILAMENT AND HIGH INTENSITY DISCHARGE LAMPS |
IES LM 11 : 1997 | PHOTOMETRIC TESTING OF SEARCHLIGHTS |
IEC 60050-845:1987 | International Electrotechnical Vocabulary (IEV) - Part 845: Lighting |
ISO 23539:2005 | Photometry — The CIE system of physical photometry |
IES LM 63 : 2002 | STANDARD FILE FORMAT FOR ELECTRONIC TRANSFER OF PHOTOMETRIC DATA |
IES LM 78 : 2007 | TOTAL FLUX MEASUREMENT OF LAMPS USING AN INTEGRATING SPHERE |
IES LM 10 : 1996 | PHOTOMETRIC TESTING OF OUTDOOR FLUORESCENT LUMINAIRES |
IES TM 16 : 2017 | SOLID STATE LIGHTING SOURCES AND SYSTEMS |
IES LM 75 : 2001 | GONIOPHOTOMETER TYPES AND PHOTOMETRIC COORDINATES |
IES LM 41 : 2014 | APPROVED METHOD FOR PHOTOMETRIC TESTING OF INDOOR FLUORESCENT LUMINAIRES |
ANSI C78.377 : 2015 | ELECTRIC LAMPS - SPECIFICATIONS FOR THE CHROMATICITY OF SOLID-STATE LIGHTING PRODUCTS |
IES LM 35 : 2002 | PHOTOMETRIC TESTING OF FLOODLIGHTS USING HIGH INTENSITY DISCHARGE OR INCANDESCENT FILAMENT LAMPS |
IES LM 58 : 2013 | SPECTRORADIOMETRIC MEASUREMENT METHODS FOR LIGHT SOURCES |
ANSI/NCSL Z540 2 : 1997(R2012) | U.S. GUIDE TO EXPRESSION OF UNCERTAINTY IN MEASUREMENT |
ISO/IEC Guide 98-3:2008 | Uncertainty of measurement — Part 3: Guide to the expression of uncertainty in measurement (GUM:1995) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.