Skip to content
Please enter a keyword to search
  • Preview

    ISO 10012:2003

    Current The latest, up-to-date edition.

    Measurement management systems — Requirements for measurement processes and measuring equipment

    Available format(s):  Hardcopy, PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

    Language(s):  English, French, Russian, Spanish, Castilian

    Published date:  14-04-2003

    Publisher:  International Organization for Standardization

    Add To Cart

    Abstract - (Show below) - (Hide below)

    ISO 10012:2003 specifies generic requirements and provides guidance for the management of measurement processes and metrological confirmation of measuring equipment used to support and demonstrate compliance with metrological requirements. It specifies quality management requirements of a measurement management system that can be used by an organization performing measurements as part of the overall management system, and to ensure metrological requirements are met.

    ISO 10012:2003 is not intended to be used as a requisite for demonstrating conformance with ISO 9001, ISO 14001 or any other standard. Interested parties can agree to use ISO 10012:2003 as an input for satisfying measurement management system requirements in certification activities. Other standards and guides exist for particular elements affecting measurement results, for example, details of measurement methods, competence of personnel, interlaboratory comparisons.

    ISO 10012:2003 is not intended as a substitute for, or as an addition to, the requirements of ISO/IEC 17025.

    General Product Information - (Show below) - (Hide below)

    Development Note Supersedes ISO/DIS 10012 (04/2003) Supersedes ISO 10012-1 and ISO 10012-2. (04/2003)
    Document Type Standard
    Publisher International Organization for Standardization
    Status Current
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    DIN EN ISO 9073-5:2009-01 TEXTILES - TEST METHODS FOR NONWOVENS - PART 5: DETERMINATION OF RESISTANCE TO MECHANICAL PENETRATION (BALL BURST PROCEDURE)
    SAE AS 9120 : 2016 QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS FOR AVIATION, SPACE AND DEFENSE DISTRIBUTORS
    15/30321131 DC : 0 BS EN ISO 13485 - MEDICAL DEVICES - QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS FOR REGULATORY PURPOSES
    99/562423 DC : DRAFT APR 99 BS:ENISO 14937 - STERILIZATION OF HEALTH CARE PRODUCTS - GENERAL CRITERIA FOR CHARACTERIZATION OF A STERILIZING AGENT AND DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS
    MIL-DTL-83734 Revision H:2007 SOCKETS, PLUG-IN ELECTRONIC COMPONENTS, DUAL-IN-LINE (DIPS) AND SINGLE-IN-LINE PACKAGES (SIPS), GENERAL SPECIFICATION FOR
    FD ISO GUIDE 34 : 2010 FD GENERAL REQUIREMENTS FOR THE COMPETENCE OF REFERENCE MATERIAL PRODUCERS
    CEI EN 62209-2 : 2013 HUMAN EXPOSURE TO RADIO FREQUENCY FIELDS FROM HAND-HELD AND BODY-MOUNTED WIRELESS COMMUNICATION DEVICES - HUMAN MODELS, INSTRUMENTATION, AND PROCEDURES - PART 2: PROCEDURE TO DETERMINE THE SPECIFIC ABSORPTION RATE (SAR) FOR WIRELESS COMMUNICATION DEVICES USED IN CLOSE PROXIMITY TO THE HUMAN BODY (FREQUENCY RANGE OF 30 MHZ TO 6 GHZ)
    BS EN 15224:2016 Quality management systems. EN ISO 9001:2015 for healthcare
    DIN EN ISO 11135-1:2007-08 STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES
    EN ISO 15378:2017 Primary packaging materials for medicinal products - Particular requirements for the application of ISO 9001:2015, with reference to good manufacturing practice (GMP) (ISO 15378:2017)
    13/30287730 DC : 0 BS EN 62828 ED 1.0 - REFERENCE CONDITIONS AND PROCEDURES FOR INDUSTRIAL MEASUREMENT TRANSMITTERS - PART 1: GENERAL PROCEDURES FOR ALL TYPES OF TRANSMITTERS
    ASTM F 3020 : 2016 Performance Standard for Hand-Worn Metal Detectors Used in Safety and Security
    UNE-EN ISO 22476-1:2015 Geotechnical investigation and testing - Field testing - Part 1: Electrical cone and piezocone penetration test (ISO 22476-1:2012)
    UNE-ISO/IEC TS 17021-3:2014 Conformity assessment -- Requirements for bodies providing audit and certification of management systems -- Part 3: Competence requirements for auditing and certification of quality management systems
    MIL-DTL-28788 Revision C:2010 SWITCHES, AIR AND LIQUID FLOW, SENSING, GENERAL SPECIFICATION FOR
    PD CEN/TR 15983:2010 Stationary source emissions. Guidance on the application of EN 14181:2004
    ECA 10-15 : 2015 GUIDELINES ON THE CALIBRATION OF DIGITAL MULTIMETERS
    BS EN 4650:2010 Aerospace series. Wire and cable marking process, UV Laser
    I.S. EN 15424:2007 STERILIZATION OF MEDICAL DEVICES - LOW TEMPERATURE STEAM AND FORMALDEHYDE - REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES
    PD ISO/TS 29001:2007 Petroleum, petrochemical and natural gas industries. Sector-specific quality management systems. Requirements for product and service supply organizations
    BS EN 62047-25:2016 Semiconductor devices. Micro-electromechanical devices Silicon based MEMS fabrication technology. Measurement method of pull-press and shearing strength of micro bonding area
    I.S. EN ISO 22000:2005 FOOD SAFETY MANAGEMENT SYSTEMS - REQUIREMENTS FOR ANY ORGANIZATION IN THE FOOD CHAIN
    13/30277457 DC : 0 BS EN 1776 - GAS INFRASTRUCTURE - GAS MEASURING SYSTEMS - FUNCTIONAL REQUIREMENTS
    I.S. ISO 10005:2005 QUALITY MANAGEMENT SYSTEMS - GUIDELINES FOR QUALITY PLANS
    S.R. CEN/TR 16792:2014 SAFETY OF CHILDREN'S CLOTHING - RECOMMENDATIONS FOR THE DESIGN AND MANUFACTURE OF CHILDREN'S CLOTHING - MECHANICAL SAFETY
    UNE-ISO 7870-1:2013 Control charts. Part 1: General guidelines
    MIL-R-10509 Revision J:2007 RESISTOR, FIXED, FILM (HIGH STABILITY) GENERAL SPECIFICATION FOR
    15/30327269 DC : 0 BS EN ISO 17034 - GENERAL REQUIREMENTS FOR THE COMPETENCE OF REFERENCE MATERIAL PRODUCERS
    I.S. EN ISO 11737-1:2018&LC:2018 STERILIZATION OF HEALTH CARE PRODUCTS - MICROBIOLOGICAL METHODS - PART 1: DETERMINATION OF A POPULATION OF MICROORGANISMS ON PRODUCTS (ISO 11737-1:2018)
    MIL-PRF-94 Revision G:2006 Resistor, Variable, Composition, General Specification for
    MIL-PRF-19207 Revision G:2013 Fuseholders, Extractor Post Type, Blown Fuse, Indicating and Nonindicating, General Specification for
    DIN EN ISO 22476-5:2013-03 Geotechnical investigation and testing - Field testing - Part 5: Flexible dilatometer test (ISO 22476-5:2012)
    SAE ARP 5485 : 2017 ENDURANCE TIME TEST PROCEDURES FOR SAE TYPE 2/3/4 AIRCRAFT DEICING/ANTI-ICING FLUIDS
    UNI EN ISO 9073-16 : 2009 TEXTILES - TEST METHODS FOR NONWOVENS - PART 16: DETERMINATION OF RESISTANCE TO PENETRATION BY WATER (HYDROSTATIC PRESSURE)
    MIL-DTL-85670 Revision D:2012 ANTENNA, BROADBAND AS-3191/A, AS-3792/A, AND AS-3793/A
    MIL-DTL-3661 Revision D:2013 Lampholders, Indicator Lights, Indicator Light Housings, and Indicator Light Lenses, General Specification for
    MIL-DTL-83503 Revision C:2005 Connectors, Electrical, Flat Cable, and/or Printed Wiring Board, Nonenvironmental General Specification for
    BS ISO 28594:2017 Combined accept-zero sampling systems and process control procedures for product acceptance
    MIL-R-83407 Revision D:2014 RELAYS, REED (MERCURY WETTED), GENERAL SPECIFICATION FOR
    MIL-DTL-49198 Revision B:2014 HEADSET-MICROPHONE KIT, MK-1564( )/AIC
    MIL-DTL-55181 Revision F:2012 CONNECTORS, PLUG AND RECEPTACLE, INTERMEDIATE POWER (ELECTRICAL, WATERPROOF), TYPE MW, GENERAL SPECIFICATION FOR
    DD ISO/TS 16949 : 2009 QUALITY MANAGEMENT SYSTEMS - PARTICULAR REQUIREMENTS FOR THE APPLICATION OF ISO 9001:2008 FOR AUTOMOTIVE PRODUCTION AND RELEVANT SERVICE PART ORGANIZATIONS
    10/30238725 DC : 0 BS EN 60469 - TRANSITIONS, PULSES AND RELATED WAVEFORMS - TERMS, DEFINITIONS AND ALGORITHMS
    14/30287226 DC : 0 BS EN ISO 15378 - PRIMARY PACKAGING MATERIALS FOR MEDICINAL PRODUCTS - PARTICULAR REQUIREMENTS FOR THE APPLICATION OF ISO 9001:2008, WITH REFERENCE TO GOOD MANUFACTURING PRACTICE (GMP)
    PREN 14180 : DRAFT 2012 STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE STEAM AND FORMALDEHYDE STERILIZERS - REQUIREMENTS AND TESTING
    CSA C392 : 2011 TESTING OF THREE-PHASE SQUIRREL CAGE INDUCTION MOTORS DURING REFURBISHMENT
    16/30302485 DC : 0 BS EN ISO 11737-1 - STERILIZATION OF HEALTH CARE PRODUCTS - MICROBIOLOGICAL METHODS - PART 1: DETERMINATION OF A POPULATION OF MICROORGANISMS ON PRODUCT
    16/30208484 DC : 0 BS EN 15654-2 - RAILWAY APPLICATIONS - MEASUREMENT OF VERTICAL FORCES ON WHEELS AND WHEELSETS - PART 2: TEST IN WORKSHOP FOR NEW, MODIFIED AND MAINTAINED VEHICLES
    13/30281229 DC : 0 BS ISO 51956 - PRACTICE FOR USE OF THERMOLUMINESCENCE DOSIMETRY (TLD) SYSTEMS FOR RADIATION PROCESSING
    DIN EN ISO 11135:2014-10 STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES (ISO 11135:2014)
    MIL-PRF-27208 Revision F:2006 RESISTOR, VARIABLE, WIREWOUND, NONPRECISION, GENERAL SPECIFICATION FOR
    BS EN ISO 22476-5:2012 Geotechnical investigation and testing. Field testing Flexible dilatometer test
    I.S. EN ISO 25178-70:2014 GEOMETRICAL PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE: AREAL - PART 70: MATERIAL MEASURES (ISO 25178-70:2014)
    PREN 285 : DRAFT 2013 STERILIZATION - STEAM STERILIZERS - LARGE STERILIZERS
    BS EN ISO 9073-5:2008 Textiles. Test methods for nonwovens Determination of resistance to mechanical penetration (ball burst procedure)
    08/30195548 DC : 0 DD ISO/TS 16949: 2009 - QUALITY MANAGEMENT SYSTEMS: PARTICULAR REQUIREMENTS FOR THE APPLICATION OF ISO 9001:2008 FOR AUTOMOTIVE PRODUCTION AND RELEVANT SERVICE PART ORGANIZATIONS
    AAMI TIR15 : 2016 PHYSICAL ASPECTS OF ETHYLENE OXIDE STERILIZATION
    DD ISO/TS 29001 : 2010 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - SECTOR-SPECIFIC QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS FOR PRODUCT AND SERVICE SUPPLY ORGANIZATIONS
    MIL-PRF-24236 Revision D:2006 SWITCHES, THERMOSTATIC, (METALLIC AND BIMETALLIC), GENERAL SPECIFICATION FOR
    ISO 13485:2016 Medical devices Quality management systems Requirements for regulatory purposes
    CSA Z11135-1 :2009 STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - PART 1: REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES
    CSA Z11135 : 2015 STERILIZATION OF HEALTH-CARE PRODUCTS - ETHYLENE OXIDE - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES
    CSA ISO/TS 16949 : 2009(R2015) QUALITY MANAGEMENT SYSTEMS - PARTICULAR REQUIREMENTS FOR THE APPLICATION OF ISO 9001:2008 FOR AUTOMOTIVE PRODUCTION AND RELEVANT SERVICE PART ORGANIZATIONS
    MIL-DTL-13484 Revision G:2011 SWITCH, SENSITIVE: 30 VOLTS DIRECT CURRENT MAXIMUM, WATERPROOF
    MIL-DTL-12285 Revision G:2016 SWITCHES, THERMOSTATIC
    BS ISO 17884:2004 Ships and marine technology. Navigation. Searchlights for high-speed craft
    CSA ISO 9001 : 2016 QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS
    I.S. EN 16602-20-07:2016 SPACE PRODUCT ASSURANCE - QUALITY AND SAFETY ASSURANCE FOR SPACE TEST CENTRES
    CSA ISO TS 16949 : 2009 QUALITY MANAGEMENT SYSTEMS - PARTICULAR REQUIREMENTS FOR THE APPLICATION OF ISO 9001:2008 FOR AUTOMOTIVE PRODUCTION AND RELEVANT SERVICE PART ORGANIZATIONS
    CSA C392 : 2011 : INC : UPD 2 : 2012 TESTING OF THREE-PHASE SQUIRREL CAGE INDUCTION MOTORS DURING REFURBISHMENT
    CEI EN 61744 : 2006 CALIBRATION OF FIBRE OPTIC CHROMATIC DISPERSION TEST SETS
    CSA ISO 14937 : 2011 STERILIZATION OF HEALTH CARE PRODUCTS - GENERAL REQUIREMENTS FOR CHARACTERIZATION OF A STERILIZING AGENT AND THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES
    MIL-DTL-21604 Revision G:2017 Switches, Rotary, Multipole and Selector, General Specification for
    IEEE/ANSI N323AB-2013 American National Standard for Radiation Protection Instrumentation Test and Calibration, Portable Survey Instruments
    MIL-DTL-28791 Revision D:2016 ISOLATORS AND CIRCULATORS, RADIO FREQUENCY, GENERAL SPECIFICATION FOR
    MIL-DTL-8971 Revision F:2013 Electrodes, Graphite, Spectrometric Grade
    MIL-PRF-49462 Revision C:2008 RESISTOR, FIXED, FILM, HIGH VOLTAGE, GENERAL SPECIFICATION FOR
    MIL-DTL-19491 Revision J:2014 SEMICONDUCTOR DEVICES, PACKAGING OF
    PREN 9137 : 200P1 QUALITY MANAGEMENT SYSTEMS - GUIDANCE FOR THE APPLICATION OF AQAP 2110 WITHIN AN EN 9100 QUALITY MANAGEMENT SYSTEM
    SAE AS 5537 : 2004 WEATHER SUPPORT TO DEICING DECISION MAKING (WSDDM) WINTER WEATHER NOWCASTING SYSTEM
    TR 9135 : 1 AEROSPACE SERIES - QUALITY SYSTEMS - SPECIFIC QUALITY REQUIREMENTS FOR NATO SUPPLIERS
    SAE AS 23053 : 2016 INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE, GENERAL SPECIFICATION FOR
    I.S. EN ISO 9073-18:2008 TEXTILES - TEST METHODS FOR NONWOVENS - PART 18: DETERMINATION OF BREAKING STRENGTH AND ELONGATION OF NONWOVEN MATERIALS USING THE GRAB TENSILE TEST
    ISO 22514-7:2012 Statistical methods in process management Capability and performance Part 7: Capability of measurement processes
    IWA 1:2005 Quality management systems Guidelines for process improvements in health service organizations
    CEN/TR 16988:2016 Estimation of uncertainty in the single burning item test
    CEI UNI 70099 : 2010 INTERNATIONAL VOCABULARY OF METROLOGY - BASIC AND GENERAL CONCEPTS AND ASSOCIATED TERMS (VIM)
    I.S. EN 15358:2011 SOLID RECOVERED FUELS - QUALITY MANAGEMENT SYSTEMS - PARTICULAR REQUIREMENTS FOR THEIR APPLICATION TO THE PRODUCTION OF SOLID RECOVERED FUELS
    SAE AS 9110 : 2016 QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS FOR AVIATION MAINTENANCE ORGANIZATIONS
    I.S. EN ISO 22476-12:2009 GEOTECHNICAL INVESTIGATION AND TESTING - FIELD TESTING - PART 12: MECHANICAL CONE PENETRATION TEST (CPTM)
    DSCC 89112 : B POWER DIVIDER, 4-WAY, 0 DEGREE, CONNECTORS
    AAMI TIR39:2009 GUIDANCE ON SELECTING A MICROBIAL CHALLENGE AND INOCULATION SITES FOR STERILIZATION VALIDATION OF MEDICAL DEVICES
    ANSI/AAMI/ISO 11135:2014 STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES
    UNE-EN ISO 22476-12:2010 Geotechnical investigation and testing - Field testing - Part 12: Mechanical cone penetration test (CPTM) (ISO 22476-12:2009)
    AAMI TIR39:2009(R2017) GUIDANCE ON SELECTING A MICROBIAL CHALLENGE AND INOCULATION SITES FOR STERILIZATION VALIDATION OF MEDICAL DEVICES
    CSA Z17665-1 : 2009 : FR STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES
    UNE-EN 16001:2010 Energy management systems - Requirements with guidance for use
    PD ISO/TS 9002:2016 Quality management systems. Guidelines for the application of ISO 9001:2015
    NSAI/ISO Guide to ISO 9001:2015 ISO 9001:2015 FOR SMALL ENTERPRISES - WHAT TO DO? - ADVICE FROM ISO/TC 176
    CEI UNI EN ISO/IEC 17025 : 2008 GENERAL REQUIREMENTS FOR THE COMPETENCE OF TESTING AND CALIBRATION LABORATORIES
    EN ISO 13485:2016/AC:2018 MEDICAL DEVICES - QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS FOR REGULATORY PURPOSES (ISO 13485:2016)
    UNE-EN ISO 22476-7:2015 Geotechnical investigation and testing - Field testing - Part 7: Borehole jack test (ISO 22476-7:2012)
    ASTM D 6537 : 2000 : R2014 Standard Practice for Instrumented Package Shock Testing For Determination of Package Performance
    ASTM E 1324 : 2016 : REDLINE Standard Guide for Measuring Some Electronic Characteristics of Ultrasonic Testing Instruments
    EN ISO 22476-4:2012 Geotechnical investigation and testing - Field testing - Part 4: Ménard pressuremeter test (ISO 22476-4:2012)
    I.S. EN ISO 9001:2015 QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS (ISO 9001:2015)
    DIN EN ISO 22000:2005-11 FOOD SAFETY MANAGEMENT SYSTEMS - REQUIREMENTS FOR ANY ORGANIZATION IN THE FOOD CHAIN
    DIN EN ISO 11137-3:2015-08 (Draft) STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 3: GUIDANCE ON DOSIMETRIC ASPECTS OF DEVELOPMENT, VALIDATION AND ROUTINE CONTROL (ISO 11137-3:2017)
    ISO 9073-5:2008 Textiles — Test methods for nonwovens — Part 5: Determination of resistance to mechanical penetration (ball burst procedure)
    I.S. EN ISO 13485:2016 MEDICAL DEVICES - QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS FOR REGULATORY PURPOSES (ISO 13485:2016)
    BS EN 12668-1:2010 Non-destructive testing. Characterization and verification of ultrasonic examination equipment Instruments
    ISO 11135-1:2007 Sterilization of health care products Ethylene oxide Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices
    I.S. EN 14276-1:2006 PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS
    BS EN 15424:2007 Sterilization of medical devices. Low temperature steam and formaldehyde. Requirements for development, validation and routine control of a sterilization process for medical devices
    BS EN ISO 14160:2011 Sterilization of health care products. Liquid chemical sterilizing agents for single-use medical devices utilizing animal tissues and their derivatives. Requirements for characterization, development, validation and routine control of a sterilization process for medical devices
    BS EN 14704-2:2007 Determination of the elasticity of fabrics Multiaxial tests
    BS EN ISO 13935-2:2014 Textiles. Seam tensile properties of fabrics and made-up textile articles Determination of maximum force to seam rupture using the grab method
    EN ISO 22476-1:2012/AC:2013 Geotechnical investigation and testing - Field testing - Part 1: Electrical cone and piezocone penetration test - Technical Corrigendum 1 (ISO 22476-1:2012/Cor 1:2013)
    IEC 60068-3-5:2018 RLV Environmental testing - Part 3-5: Supporting documentation and guidance - Confirmation of the performance of temperature chambers
    NF EN ISO 11737-2 : 2010 STERILIZATION OF MEDICAL DEVICES - MICROBIOLOGICAL METHODS - PART 2: TESTS OF STERILITY PERFORMED IN THE DEFINITION, VALIDATION AND MAINTENANCE OF A STERILIZATION PROCESS
    CEN/CLC ISO/IEC/TS 17021-3:2016 Conformity assessment - Requirements for bodies providing audit and certification of management systems - Part 3: Competence requirements for auditing and certification of quality management systems (ISO/IEC/TS 17021-3:2013)
    IEC 60068-3-6:2018 RLV Environmental testing - Part 3-6: Supporting documentation and guidance - Confirmation of the performance of temperature/ humidity chambers
    CEN ISO/TR 14969:2005 Medical devices - Quality management systems - Guidance on the application of ISO 13485:2003 (ISO/TR 14969:2004)
    CEN/TR 15592:2007 Health services - Quality management systems - Guide for the use of EN ISO 9004:2000 in health services for performance improvement
    EN 12668-1:2010 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 1: Instruments
    EN 15224:2016 Quality management systems - EN ISO 9001:2015 for healthcare
    CEN/TR 15983:2010 Stationary source emissions - Guidance on the application of EN 14181:2004
    EN 12258-2:2004 Aluminium and aluminium alloys - Terms and definitions - Part 2: Chemical analysis
    DIN EN 14704-2:2007-05 DETERMINATION OF THE ELASTICITY OF FABRICS - PART 2: MULTIAXIAL TESTS
    CEN/TR 16792:2014 Safety of children's clothing - Recommendations for the design and manufacture of children's clothing - Mechanical safety
    DIN EN 15424:2007-08 STERILIZATION OF MEDICAL DEVICES - LOW TEMPERATURE STEAM AND FORMALDEHYDE - REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES
    UNI EN ISO 14160 : 2011 STERILIZATION OF HEALTH CARE PRODUCTS - LIQUID CHEMICAL STERILIZING AGENTS FOR SINGLE-USE MEDICAL DEVICES UTILIZING ANIMAL TISSUES AND THEIR DERIVATIVES - REQUIREMENTS FOR CHARACTERIZATION, DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES
    DIN EN ISO 13936-1:2004-07 Textiles - Determination of the slippage resistance of yarns at a seam in woven fabrics - Part 1: Fixed seam opening method (ISO 13936-1:2004)
    EN 15358:2011 Solid recovered fuels - Quality management systems - Particular requirements for their application to the production of solid recovered fuels
    DIN EN 15224:2017-05 QUALITY MANAGEMENT SYSTEMS - EN ISO 9001:2015 FOR HEALTHCARE
    MIL-PRF-50884 Revision F:2014 Printed Wiring Board, Flexible or Rigid-Flex, General Specification for
    MIL-DTL-83731 Revision E:2016 SWITCHES, TOGGLE, UNSEALED AND SEALED, GENERAL SPECIFICATION FOR
    MIL C 5 : G CAPACITOR, FIXED, MICA DIELECTRIC, GENERAL SPECIFICATION FOR
    MIL-PRF-32192 Base Document:2005 RESISTOR, CHIP, THERMAL (THERMISTOR), GENERAL SPECIFICATION FOR
    MIL P 50884 : E PRINTED WIRING BOARD, FLEXIBLE OR RIGID-FLEX, GENERAL SPECIFICATION FOR
    W-C-375 Revision E:2013 CIRCUIT BREAKERS, MOLDED CASE; BRANCH CIRCUIT AND SERVICE
    SAE AMS 2432 : 2013 SHOT PEENING, COMPUTER MONITORED
    IPC J STD 004 RUSSIAN : B REQUIREMENTS FOR SOLDERING FLUXES
    MIL-PRF-22710 Revision H:2013 Switches, Code Indicating Wheel (Printed Circuit), Thumbwheel and Push-Button, General Specification for
    MIL-PRF-55110 Revision H:2014 Printed Wiring Board, Rigid, General Specification for
    MIL-DTL-13735 Revision H:2017 Switches, Toggle: 28 Volt DC
    JEDEC JESD 557C : 2015 Statistical Process Control Systems
    MIL-PRF-32565 Revision A:2017 BATTERY, RECHARGEABLE, SEALED, 6T LITHIUM-ION
    W-S-896 Revision G:2014 SWITCHES, TOGGLE (TOGGLE AND LOCK), FLUSH MOUNTED (GENERAL SPECIFICATION)
    MIL-DTL-32139 Revision B:2017 Connectors, Electrical, Rectangular, Nanominiature, Polarized Shell, General Specification for
    ONORM EN 4650 : 2010 AEROSPACE SERIES - WIRE AND CABLE MARKING PROCESS, UV LASER
    MIL-DTL-28748 Revision D:2001 CONNECTOR, PLUG AND RECEPTACLE, RECTANGULAR, RACK AND PANEL SOLDER TYPE AND CRIMP TYPE CONTACTS - GENERAL SPECIFICATION FOR
    MIL-DTL-9419 Revision H:2016 Switch, Toggle, Momentary, Four-Position on, Center off, General Specification for
    MIL-DTL-3786 Revision J:2013 SWITCHES, ROTARY (CIRCUIT SELECTOR, LOW-CURRENT CAPACITY), GENERAL SPECIFICATION FOR
    MIL-PRF-22885 Revision J:2016 Switches, Push Button, Illuminated, General Specification for
    MIL-DTL-28827 Revision C:2011 SWITCHES, THERMOSTATIC, (VOLATILE LIQUID), HERMETICALLY SEALED, GENERAL SPECIFICATION FOR
    ONORM EN ISO 22476-1 : OCT 2013 GEOTECHNICAL INVESTIGATION AND TESTING - FIELD TESTING - PART 1: ELECTRICAL CONE AND PIEZOCONE PENETRATION TEST (ISO 22476-1:2012 + COR 1:2013)
    MIL-DTL-53126 Revision A:2012 POWER DISTRIBUTION, ILLUMINATION SYSTEMS, ELECTRICAL, GENERAL SPECIFICATION FOR
    MIL-PRF-8805 Revision G:2016 SWITCHES AND SWITCH ASSEMBLIES, SENSITIVE, SNAP ACTION (BASIC, LIMIT, PUSH BUTTON AND TOGGLE SWITCHES), GENERAL SPECIFICATION FOR
    IPC J STD 004 CHINESE : B REQUIREMENTS FOR SOLDERING FLUXES
    MIL-PRF-3098 Revision L:2017 CRYSTAL UNITS, QUARTZ, GENERAL SPECIFICATION FOR
    MIL-DTL-3950 Revision K:2016 Switches, Toggle, Environmentally Sealed, General Specification for
    MIL-DTL-9395 Revision K:2016 Switches, Pressure (Absolute, Gage and Differential) General Specification for
    MIL-PRF-27 Revision G:2014 TRANSFORMERS AND INDUCTORS (AUDIO, POWER, AND HIGH-POWER PULSE), GENERAL SPECIFICATION FOR
    IEEE/ANSI C63.4-2014 American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz
    MIL-DTL-16225 Revision C:2010 LOUDSPEAKER, PERMANENT MAGNET, BLASTPROOF AND SUBMERSIBLE, NAVY TYPE 49546()
    MIL-DTL-6749 Revision B:2008 RESISTOR, VARIABLE, WIREWOUND, NONPRECISION, AIRCRAFT POWER
    MIL-DTL-11996 Revision C:2015 HANDSETS, GENERAL SPECIFICATION FOR
    MIL-PRF-55629 Revision E:2011 CIRCUIT BREAKERS, MAGNETIC, UNSEALED OR PANEL SEAL, TRIP-FREE, GENERAL SPECIFICATION FOR
    MIL-DTL-12606 Revision E:2000 LOUDSPEAKER, PERMANENT MAGNET (UNENCASED, 3-INCH AND 4-INCH DIAMETER CONE, 2-WATT; FUNGUS-, AND IMMERSION-RESISTANT), TYPE LS-445/U, M12606-01, AND M12606-02
    MIL-DTL-12632 Revision E:2016 LOUDSPEAKERS, PERMANENT MAGNET (ENCASED, 2-WATT, FUNGUS-, GUNBLAST-, AND IMMERSION-RESISTANT), GENERAL SPECIFICATION FOR
    W-F-1814 Revision D:2013 FUSES, CARTRIDGE, HIGH-INTERRUPTING CAPACITY
    ONORM EN ISO 22476-5 : 2013 GEOTECHNICAL INVESTIGATION AND TESTING - FIELD TESTING - PART 5: FLEXIBLE DILATOMETER TEST (ISO 22476-5:2012)
    BS EN ISO 15378:2017 Primary packaging materials for medicinal products. Particular requirements for the application of ISO 9001:2015, with reference to good manufacturing practice (GMP)
    PREN 1422 : DRAFT 2011 STERILIZERS FOR MEDICAL PURPOSES - ETHYLENE OXIDE STERILIZERS - REQUIREMENTS AND TEST METHODS
    MIL-DTL-3933 Revision L:2014 Attenuators, Fixed, Space Level, Non-Space Level General Specification for
    09/30205176 DC : 0 ISO/TS 25680 - MEDICAL LABORATORIES - CALCULATION AND EXPRESSION OF MEASUREMENT UNCERTAINTY
    MIL-DTL-10911 Revision E:2012 LOUDSPEAKERS, PERMANENT MAGNET, (UNENCASED, 2.5-, 3-, 4-, 5-, 6-, 8-, 10-, AND 12-INCH DIAMETER CONES), GENERAL SPECIFICATION FOR
    PD ISO/TS 14033:2012 Environmental management. Quantitative environmental information. Guidelines and examples
    MIL-DTL-24317 Revision B:2010 SWITCHES, MULTISTATION, PUSHBUTTON, ILLUMINATED AND NON-ILLUMINATED), GENERAL SPECIFICATION FOR
    MIL-F-18327 Revision F:2008 FILTERS; HIGH PASS, LOW PASS, BAND PASS, BAND SUPPRESSION, AND DUAL FUNCTIONING, GENERAL SPECIFICATION FOR
    PD ISO/TR 26762:2008 Natural gas. Upstream area. Allocation of gas and condensate
    MIL-DTL-15370 Revision K:2015 COUPLERS, DIRECTIONAL, GENERAL SPECIFICATION FOR
    BS EN 60861:2008 Equipment for monitoring of radionuclides in liquid effluents and surface waters
    UNE-EN 16421:2015 Influence of materials on water for human consumption - Enhancement of microbial growth (EMG)
    UNE 179008:2016 Quality management system for liver transplantation units
    I.S. EN ISO 9073-15:2008 TEXTILES - TEST METHODS FOR NONWOVENS - PART 15: DETERMINATION OF AIR PERMEABILITY
    17/30321076 DC : 0 BS ISO 22000 - FOOD SAFETY MANAGEMENT SYSTEMS - REQUIREMENTS FOR ANY ORGANIZATION IN THE FOOD CHAIN
    12/30262894 DC : 0 BS EN 14180 - STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE STEAM AND FORMALDEHYDE STERILIZERS - REQUIREMENTS AND TESTING
    15/30318290 DC : 0 BS EN ISO 17662 - WELDING - CALIBRATION, VERIFICATION AND VALIDATION OF EQUIPMENT USED FOR WELDING, INCLUDING ANCILLARY ACTIVITIES
    15/30328933 DC : 0 BS EN 9100 - QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS FOR AVIATION, SPACE AND DEFENSE ORGANIZATIONS
    12/30259670 DC : 0 BS ISO/IEC GUIDE 98-4.2 - UNCERTAINTY OF MEASUREMENT - PART 4: ROLE OF MEASUREMENT UNCERTAINTY IN CONFORMITY ASSESSMENT
    UNI EN 4650 : 2011 AEROSPACE SERIES - WIRE AND CABLE MARKING PROCESS, UV LASER
    16/30339586 DC : 0 BS EN 60068-3-6 - ENVIRONMENTAL TESTING - PART 3-6: SUPPORTING DOCUMENTATION AND GUIDANCE - CONFIRMATION OF THE PERFORMANCE OF TEMPERATURE/HUMIDITY CHAMBERS
    14/30303365 DC : 0 BS ISO/ASTM 51649 - PRACTICE FOR DOSIMETRY IN AN ELECTRON BEAM FACILITY FOR RADIATION PROCESSING AT ENERGIES BETWEEN 300 KEV AND 25 MEV
    SAE AS 9100D : 2016 QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS FOR AVIATION, SPACE AND DEFENSE ORGANIZATIONS
    BS EN ISO 22476-7:2012 Geotechnical investigation and testing. Field testing Borehole jack test
    ANSI CGATS/ISO 15790 : 2005(R2007) GRAPHIC TECHNOLOGY AND PHOTOGRAPHY - CERTIFIED REFERENCE MATERIALS FOR REFLECTION AND TRANSMISSION METROLOGY - DOCUMENTATION AND PROCEDURES FOR USE, INCLUDING DETERMINATION OF COMBINED STANDARD UNCERTAINTY
    17/30347919 DC : 0 BS ISO 10005 - QUALITY MANAGEMENT SYSTEMS - GUIDELINES FOR QUALITY PLANS
    BS ISO 15589-1 : 2015 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - CATHODIC PROTECTION OF PIPELINE SYSTEMS - PART 1: ON-LAND PIPELINES
    MIL-DTL-13625 Revision G:2017 SWITCHES, PULL; SWITCHES, PUSH; SWITCHES, BEAM SELECTING, HEADLIGHT: ELECTRICAL (28 VOLTS DC MAXIMUM, FOR MILITARY VEHICLES)
    MIL-DTL-21097 Revision H:2017 Connectors, Electrical, Printed Wiring Board, General Purpose General Specification for
    PD CEN/CLC ISO/IEC TS 17021-3:2016 Conformity assessment. Requirements for bodies providing audit and certification of management systems Competence requirements for auditing and certification of quality management systems
    07/30162524 DC : 0 BS ISO 7971-2 - CEREALS - DETERMINATION OF BULK DENSITY, CALLED MASS PER HECTOLITRE - PART 2: METHOD OF TRACEABILITY FOR MEASURING INSTRUMENTS THROUGH REFERENCE TO THE INTERNATIONAL STANDARD INSTRUMENT
    11/30252448 DC : 0 BS EN 1422 - STERILIZERS FOR MEDICAL PURPOSES - ETHYLENE OXIDE STERILIZERS - REQUIREMENTS AND TEST METHODS
    04/30054528 DC : DRAFT APR 2004 ISO 19922 - SHIPS AND MARINE TECHNOLOGY - FIRE RESISTANCE OF PIPELINE COMPONENTS FOR METALLIC PIPING SYSTEMS - REQUIREMENTS ON THE TEST BENCH
    MIL-STD-705 Revision D:2016 MOBILE ELECTRIC POWER SYSTEMS
    OIML V 2-200 : 2012 INTERNATIONAL VOCABULARY OF METROLOGY - BASIC AND GENERAL CONCEPTS AND ASSOCIATED TERMS (VIM)
    BS ISO 15378 : 2006 AMD 17315 PRIMARY PACKAGING MATERIALS FOR MEDICINAL PRODUCTS - PARTICULAR REQUIREMENTS FOR THE APPLICATION OF ISO 9001:2000, WITH REFERENCE TO GOOD MANUFACTURING PRACTICE (GMP)
    BS ISO 22514-7:2012 Statistical methods in process management. Capability and performance Capability of measurement processes
    BS ISO 16762:2016 Graphic technology. Post-press. General requirements for transfer, handling and storage
    DD CEN ISO/TS 29001:2011 Petroleum, petrochemical and natural gas industries. Sector-specific quality management systems. Requirements for product and service supply organizations
    I.S. EN ISO 11135:2014 STERILIZATION OF HEALTH-CARE PRODUCTS - ETHYLENE OXIDE - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES (ISO 11135:2014)
    05/30066638 DC : DRAFT OCT 2005 EN 15424 - STERILIZATION OF MEDICAL DEVICES - DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF STERILIZATION PROCESSES - LOW TEMPERATURE STEAM AND FORMALDEHYDE
    BS EN ISO 9073-15:2008 Textiles. Test methods for nonwovens Determination of air permeability
    UNE-EN ISO 22476-5:2014 Geotechnical investigation and testing - Field testing - Part 5: Flexible dilatometer test (ISO 22476-5:2012)
    11/30244091 DC : 0 BS EN ISO 11135 - STERILIZATION OF HEALTH-CARE PRODUCTS - ETHYLENE OXIDE - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES
    MIL-PRF-15733 Revision J:2010 FILTERS AND CAPACITORS, RADIO FREQUENCY INTERFERENCE, GENERAL SPECIFICATION FOR
    BS ISO 14470:2011 Food irradiation. Requirements for the development, validation and routine control of the process of irradiation using ionizing radiation for the treatment of food
    UNI CEI EN 16001 : 2009 ENERGY MANAGEMENT SYSTEMS - REQUIREMENTS WITH GUIDANCE FOR USE
    13/30278676 DC : 0 BS EN 285 - STERILIZATION - STEAM STERILIZERS - LARGE STERILIZERS
    CSA C392 : 2011 : INC : UPD 1 : 2011 TESTING OF THREE-PHASE SQUIRREL CAGE INDUCTION MOTORS DURING REFURBISHMENT
    07/30169952 DC : DRAFT AUG 2007 ISO 9073-5 - TEXTILES - TEST METHODS FOR NONWOVENS - PART 5: RESISTANCE TO MECHANICAL PENETRATION (BALL BURST PROCEDURE)
    14/30298856 DC : 0 BS EN 9133 - AEROSPACE SERIES - QUALIFICATION PROCEDURE FOR AEROSPACE STANDARD PRODUCTS
    BS ISO 10019:2005 Guidelines for the selection of quality management system consultants and use of their services
    14/30262728 DC : 0 BS ISO 9000 - QUALITY MANAGEMENT SYSTEMS - FUNDAMENTALS AND VOCABULARY
    MIL-DTL-7703 Revision F:2010 Guard, Switch, General Specification for
    MIL-DTL-39028 Revision F:2013 CAPACITORS, PACKAGING OF
    08/30172145 DC : DRAFT FEB 2008 BS EN 16001 - ENERGY MANAGEMENT SYSTEMS - REQUIREMENTS WITH GUIDANCE FOR USE
    04/30048205 DC : DRAFT JUL 2004 BS EN ISO 17665 - STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES
    DIN EN ISO 9073-16 E : 2009 TEXTILES - TEST METHODS FOR NONWOVENS - PART 16: DETERMINATION OF RESISTANCE TO PENETRATION BY WATER (HYDROSTATIC PRESSURE)
    MIL-DTL-75 Revision K:2007 ELECTRON TUBES, PACKAGING OF
    MIL-STD-461 Revision G:2015 REQUIREMENTS FOR THE CONTROL OF ELECTROMAGNETIC INTERFERENCE CHARACTERISTICS OF SUBSYSTEMS AND EQUIPMENT
    DIN EN ISO 22476-12:2009-10 GEOTECHNICAL INVESTIGATION AND TESTING - FIELD TESTING - PART 12: MECHANICAL CONE PENETRATION TEST (CPTM)
    CSA ISO TS 16949 : 2009 : R2015 QUALITY MANAGEMENT SYSTEMS - PARTICULAR REQUIREMENTS FOR THE APPLICATION OF ISO 9001:2008 FOR AUTOMOTIVE PRODUCTION AND RELEVANT SERVICE PART ORGANIZATIONS
    04/30075589 DC : DRAFT JUL 2004 BS ISO 22000 - FOOD SAFETY MANAGEMENT SYSTEMS - REQUIREMENTS
    06/30058083 DC : DRAFT FEB 2006 BS ISO 7870-1 - CONTROL CHARTS - PART 1: GENERAL GUIDELINES
    CEI EN 60469 : 2014 TRANSITIONS, PULSES AND RELATED WAVE FORMS - TERMS, DEFINITIONS AND ALGORITHMS
    AAMI ISO 17665-1 : 2006 STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES
    RG.AERO 00085 : 0 QUALITY SYSTEM APPLICABLE TO THE AEROSPACE FIELD - MODEL FOR QUALITY ASSURANCE OF RETAILER, DISTRIBUTOR, STOCKIST SERVICES
    IPC 9194 : 0 IMPLEMENTATION OF STATISTICAL PROCESS CONTROL (SPC) APPLIED TO PRINTED BOARD ASSEMBLY MANUFACTURE GUIDELINE
    MIL-PRF-22 Revision E:2007 RESISTOR, VARIABLE, WIREWOUND, POWER TYPE, GENERAL SPECIFICATION FOR
    PREN 9133 : 200P1 AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS - QUALIFICATION PROCEDURE FOR AEROSPACE STANDARD PRODUCTS
    AAMI ISO 20857 : 2010 STERILIZATION OF HEALTH CARE PRODUCTS - DRY HEAT - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES
    UNI EN 15358 : 2011 SOLID RECOVERED FUELS - QUALITY MANAGEMENT SYSTEMS - PARTICULAR REQUIREMENTS FOR THEIR APPLICATION TO THE PRODUCTION OF SOLID RECOVERED FUELS
    I.S. EN 16421:2014 INFLUENCE OF MATERIALS ON WATER FOR HUMAN CONSUMPTION - ENHANCEMENT OF MICROBIAL GROWTH (EMG)
    IEC 60068-3-5:2018 Environmental testing - Part 3-5: Supporting documentation and guidance - Confirmation of the performance of temperature chambers
    ISO 15378:2017 Primary packaging materials for medicinal products — Particular requirements for the application of ISO 9001:2015, with reference to good manufacturing practice (GMP)
    ISO/TR 26762:2008 Natural gas — Upstream area — Allocation of gas and condensate
    ISO 9004:2018 Quality management — Quality of an organization — Guidance to achieve sustained success
    BS EN 62209-2:2010 Human exposure to radio frequency fields from hand-held and bodymounted wireless communication devices. Human models, instrumentation, and procedures Procedure to determine the specific absorption rate (SAR) for wireless communication devices used in close proximity to the human body (frequency range of 30 MHz to 6 GHz)
    BS EN ISO/IEC 17025:2017 General requirements for the competence of testing and calibration laboratories
    I.S. EN ISO 25424:2011 STERILIZATION OF MEDICAL DEVICES - LOW TEMPERATURE STEAM AND FORMALDEHYDE - REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES
    I.S. EN ISO 22476-5:2012 GEOTECHNICAL INVESTIGATION AND TESTING - FIELD TESTING - PART 5: FLEXIBLE DILATOMETER TEST (ISO 22476-5:2012)
    ISO/TS 14033:2012 Environmental management Quantitative environmental information Guidelines and examples
    AAMI ISO 11737-2 : 2009 : R2014 STERILIZATION OF MEDICAL DEVICES - MICROBIOLOGICAL METHODS - PART 2: TESTS OF STERILITY PERFORMED IN THE DEFINITION, VALIDATION AND MAINTENANCE OF A STERILIZATION PROCESS
    I.S. EN IEC 60068-3-5:2018 ENVIRONMENTAL TESTING - PART 3-5: SUPPORTING DOCUMENTATION AND GUIDANCE - CONFIRMATION OF THE PERFORMANCE OF TEMPERATURE CHAMBERS
    AAMI ISO 11737-2 :2009 STERILIZATION OF MEDICAL DEVICES - MICROBIOLOGICAL METHODS - PART 2: TESTS OF STERILITY PERFORMED IN THE DEFINITION, VALIDATION AND MAINTENANCE OF A STERILIZATION PROCESS
    BIS IS/ISO 13936-1 : 2004 TEXTILES - DETERMINATION OF THE SLIPPAGE RESISTANCE OF YARNS AT A SEAM IN WOVEN FABRICS - PART 1: FIXED SEAM OPENING METHOD
    I.S. EN 62047-25:2016 SEMICONDUCTOR DEVICES - MICRO-ELECTROMECHANICAL DEVICES - PART 25: SILICON BASED MEMS FABRICATION TECHNOLOGY - MEASUREMENT METHOD OF PULL-PRESS AND SHEARING STRENGTH OF MICRO BONDING AREA
    ISO 15790:2004 Graphic technology and photography — Certified reference materials for reflection and transmission metrology — Documentation and procedures for use, including determination of combined standard uncertainty
    EN IEC 60068-3-6:2018/AC:2018-05 ENVIRONMENTAL TESTING - PART 3-6: SUPPORTING DOCUMENTATION AND GUIDANCE - CONFIRMATION OF THE PERFORMANCE OF TEMPERATURE/HUMIDITY CHAMBERS (IEC 60068-3-6:2018)
    AAMI ISO 11737-1 : 2006 : R2011 STERILIZATION OF MEDICAL DEVICES - MEDICAL DEVICES - PART 1: DETERMINATION OF THE POPULATION OF MICROORGANISMS ON PRODUCT
    S.R. CEN/TR 16988:2016 ESTIMATION OF UNCERTAINTY IN THE SINGLE BURNING ITEM TEST
    ANSI/AAMI ST15883-1:2009(R2014) &A1:2014&A2:2012 WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS
    UNI EN ISO 22476-4 : 2013 GEOTECHNICAL INVESTIGATION AND TESTING - FIELD TESTING - PART 4: MENARD PRESSUREMETER TEST
    UNI CEI ISO/IEC TS 17021-3 : 2013 CONFORMITY ASSESSMENT - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF MANAGEMENT SYSTEMS - PART 3: COMPETENCE REQUIREMENTS FOR AUDITING AND CERTIFICATION OF QUALITY MANAGEMENT SYSTEM
    AAMI ST15883-1 : 2009 : INC : AMD 1 : 2014 : R201400 WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS
    IEC 60068-3-5 REDLINE : 2.0 ENVIRONMENTAL TESTING - PART 3-5: SUPPORTING DOCUMENTATION AND GUIDANCE - CONFIRMATION OF THE PERFORMANCE OF TEMPERATURE CHAMBERS
    UNI ISO TS 16949 : 2009 QUALITY MANAGEMENT SYSTEMS - PARTICULAR REQUIREMENTS FOR THE APPLICATION OF ISO 9001:2008 FOR AUTOMOTIVE PRODUCTION AND RELEVANT SERVICE PART ORGANIZATIONS
    ASTM D 6537 : 2000 : R2006 Standard Practice for Instrumented Package Shock Testing For Determination of Package Performance
    ASTM E 3024/E3024M : 2016 Standard Practice for Magnetic Particle Testing for General Industry
    UNE-EN ISO 9001:2015 Quality management systems - Requirements (ISO 9001:2015)
    ASTM D 6537 : 2000 Standard Practice for Instrumented Package Shock Testing for Determination of Package Performance
    EN ISO 9001:2015 Quality management systems - Requirements (ISO 9001:2015)
    EN ISO 9000:2015 Quality management systems - Fundamentals and vocabulary (ISO 9000:2015)
    EN ISO 14937:2009 Sterilization of health care products - General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices (ISO 14937:2009)
    ISO 13935-1:2014 Textiles Seam tensile properties of fabrics and made-up textile articles Part 1: Determination of maximum force to seam rupture using the strip method
    DIN EN ISO 17662:2016-09 WELDING - CALIBRATION, VERIFICATION AND VALIDATION OF EQUIPMENT USED FOR WELDING, INCLUDING ANCILLARY ACTIVITIES (ISO 17662:2016)
    DIN EN ISO 17665-1:2006-11 Sterilization of health care products - Moist heat - Part 1: Requirements for the development, validation and routine control of a sterilization process for medical devices (ISO 17665-1:2006)
    DIN EN 12697-38:2004-10 Bituminous mixtures - Test methods for hot mix asphalt - Part 38: Common equipment and calibration; German version EN 12697-38:2004
    DIN EN 14343 E : 2006 ROTARY POSITIVE DISPLACEMENT PUMPS - PERFORMANCE TESTS FOR ACCEPTANCE
    DIN EN 14343:2006-11 ROTARY POSITIVE DISPLACEMENT PUMPS - PERFORMANCE TESTS FOR ACCEPTANCE
    UNE-EN ISO 17662:2016 Welding - Calibration, verification and validation of equipment used for welding, including ancillary activities (ISO 17662:2016)
    BS EN ISO 11737-2:2009 Sterilization of medical devices. Microbiological methods Tests of sterility performed in the definition, validation and maintenance of a sterilization process
    IEC 60469:2013 Transitions, pulses and related waveforms - Terms, definitions and algorithms
    ISO 9000:2015 Quality management systems — Fundamentals and vocabulary
    ISO 25178-70:2014 Geometrical product specification (GPS) — Surface texture: Areal — Part 70: Material measures
    ISO/TS 29001:2010 Petroleum, petrochemical and natural gas industries Sector-specific quality management systems Requirements for product and service supply organizations
    BS EN 295-2:2013 Vitrified clay pipe systems for drains and sewers Evaluation of conformity and sampling
    ISO 25424:2009 Sterilization of medical devices Low temperature steam and formaldehyde Requirements for development, validation and routine control of a sterilization process for medical devices
    BS EN 14343:2005 Rotary positive displacement pumps. Performance tests for acceptance
    UNE-EN ISO 9000:2015 Quality management systems - Fundamentals and vocabulary (ISO 9000:2015)
    I.S. EN 14704-3:2006 DETERMINATION OF THE ELASTICITY OF FABRICS - PART 3: NARROW FABRICS
    DIN EN ISO 7971-2:2010-01 CEREALS - DETERMINATION OF BULK DENSITY, CALLED MASS PER HECTOLITRE - PART 2: METHOD OF TRACEABILITY FOR MEASURING INSTRUMENTS THROUGH REFERENCE TO THE INTERNATIONAL STANDARD INSTRUMENT
    I.S. EN ISO 14937:2009 STERILIZATION OF HEALTH CARE PRODUCTS - GENERAL REQUIREMENTS FOR CHARACTERIZATION OF A STERILIZING AGENT AND THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES
    I.S. EN 295-2:2013 VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 2: EVALUATION OF CONFORMITY AND SAMPLING
    DIN EN 1776:2016-05 GAS INFRASTRUCTURE - GAS MEASURING SYSTEMS - FUNCTIONAL REQUIREMENTS
    I.S. EN 14704-1:2005 DETERMINATION OF THE ELASTICITY OF FABRICS - PART 1: STRIP TESTS
    UNI EN 12668-1 : 2010 NON-DESTRUCTIVE TESTING - CHARACTERIZATION AND VERIFICATION OF ULTRASONIC EXAMINATION EQUIPMENT - PART 1: INSTRUMENTS
    I.S. EN ISO 13935-1:2014 TEXTILES - SEAM TENSILE PROPERTIES OF FABRICS AND MADE-UP TEXTILE ARTICLES - PART 1: DETERMINATION OF MAXIMUM FORCE TO SEAM RUPTURE USING THE STRIP METHOD (ISO 13935-1:2014)
    I.S. EN ISO 14160:2011 STERILIZATION OF HEALTH CARE PRODUCTS - LIQUID CHEMICAL STERILIZING AGENTS FOR SINGLE-USE MEDICAL DEVICES UTILIZING ANIMAL TISSUES AND THEIR DERIVATIVES - REQUIREMENTS FOR CHARACTERIZATION, DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES
    I.S. EN 14704-2:2007 DETERMINATION OF THE ELASTICITY OF FABRICS - PART 2: MULTIAXIAL TESTS
    I.S. EN ISO 11137-3:2017 STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 3: GUIDANCE ON DOSIMETRIC ASPECTS OF DEVELOPMENT, VALIDATION AND ROUTINE CONTROL (ISO 11137-3:2017)
    I.S. EN ISO 13935-2:2014 TEXTILES - TENSILE PROPERTIES OF FABRICS AND MADE-UP TEXTILE ARTICLES - PART 2: DETERMINATION OF MAXIMUM FORCE TO SEAM RUPTURE USING THE GRAB METHOD (ISO 13935-2:2014)
    I.S. EN 12668-1:2010 NON-DESTRUCTIVE TESTING - CHARACTERIZATION AND VERIFICATION OF ULTRASONIC EXAMINATION EQUIPMENT - PART 1: INSTRUMENTS
    I.S. EN ISO 13934-1:2013 TEXTILES - TENSILE PROPERTIES OF FABRICS - PART 1: DETERMINATION OF MAXIMUM FORCE AND ELONGATION AT MAXIMUM FORCE USING THE STRIP METHOD (ISO 13934-1:2013)
    I.S. EN ISO 17662:2016 WELDING - CALIBRATION, VERIFICATION AND VALIDATION OF EQUIPMENT USED FOR WELDING, INCLUDING ANCILLARY ACTIVITIES (ISO 17662:2016)
    I.S. EN 1776:2015 GAS INFRASTRUCTURE - GAS MEASURING SYSTEMS - FUNCTIONAL REQUIREMENTS
    UNI EN ISO 11737-2 : 2010 STERILIZATION OF MEDICAL DEVICES - MICROBIOLOGICAL METHODS - PART 2: TESTS OF STERILITY PERFORMED IN THE DEFINITION, VALIDATION AND MAINTENANCE OF A STERILIZATION PROCESS
    MIL-HDBK-115 Revision C:2016 U.S. ARMY REVERSE ENGINEERING HANDBOOK (GUIDELINES AND PROCEDURES)
    UNI ISO/TR 18532 : 2010 Guide to the application of statistical methods for quality and standardization in the industrial sector
    VDI/VDE 2631 Blatt 2:2014-06 Form measurement - Verification of the signal transmission chain
    VDI/VDE 2631 Blatt 8:2013-09 Form measurement - Stability monitoring of form measuring systems
    VDI/VDE/DGQ/DKD 2622 Blatt 15.1:2011-10 Calibration for measuring equipment for electrical quantities - Artificial mains networks
    VDI/VDE 2600 Blatt 1:2013-10 Inspection process management - Identification, classification and proof of suitability for inspection processes
    VDI/VDE/DGQ/DKD 2622 Blatt 10:2004-06 Calibration of measurement equipments for electrical quantities - High-frequency fieldstring meters
    VDI/VDE/VDMA 2632 Blatt 2:2015-10 Machine vision - Guideline for the preparation of a requirement specification and a system specification
    VDI 3431:2016-08 Bending of profiles - Testing notes for profile bending elements
    VDI/VDE/DGQ/DKD 2622 Blatt 1:2014-06 Calibration of measuring equipment for electrical quantities - Fundamentals
    I.S. EN ISO 15589-1:2017 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - CATHODIC PROTECTION OF PIPELINE SYSTEMS - PART 1: ON-LAND PIPELINES (ISO 15589-1:2015)
    DIN EN 12668-1:2010-05 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 1: Instruments
    15/30329378 DC : 0 BS EN 9110 - AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS FOR AVIATION MAINTENANCE ORGANIZATIONS
    UNI EN ISO 22476-1 : 2012 GEOTECHNICAL INVESTIGATION AND TESTING - FIELD TESTING - PART 1: ELECTRICAL CONE AND PIEZOCONE PENETRATION TEST
    08/30135847 DC : DRAFT AUG 2008 BS ISO 9004 - MANAGING FOR THE SUSTAINED SUCCESS OF AN ORGANIZATION - A QUALITY MANAGEMENT APPROACH
    ANSI/AAMI/ISO 20857:2010(R2015) STERILIZATION OF HEALTH CARE PRODUCTS - DRY HEAT - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES
    MIL-PRF-12934 Revision L:2009 Resistor, Variable, Wirewound, Precision General Specification for
    TP 127 : 2017 METHOD OF TEST FOR DETERMINING THE FRACTURE ENERGY DENSITY OF ASPHALT BINDER USING THE BINDER FRACTURE ENERGY (BFE) TEST
    BS EN 9137:2012 Quality management systems. Guidance for the Application of AQAP 2110 within an EN 9100 Quality Management System
    MIL-PRF-572 Revision H:2015 CORDS, YARNS AND MONOFILAMENTS ORGANIC SYNTHETIC FIBER
    BS EN ISO 9004:2018 Quality management. Quality of an organization. Guidance to achieve sustained success
    BS EN 15358:2011 Solid recovered fuels. Quality management systems. Particular requirements for their application to the production of solid recovered fuels
    16/30330102 DC : 0 BS ISO 16762 - GRAPHIC TECHNOLOGY - POST PRESS - GENERAL REQUIREMENTS FOR TRANSFER, HANDLING AND STORAGE
    BS ISO 11074:2005 Soil quality. Vocabulary
    UNE-EN ISO 17034:2017 General requirements for the competence of reference material producers (ISO 17034:2016)
    PD CEN/TR 16988:2016 Estimation of uncertainty in the single burning item test
    I.S. EN ISO 17665-1:2006 STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES
    FAA AC 150/5345-49 : 2007 SPECIFICATION L-854, RADIO CONTROL EQUIPMENT
    BS EN 16001:2009 Energy management systems. Requirements with guidance for use
    04/30092984 DC : DRAFT JAN 2004 ISO 10005 - QUALITY MANAGEMENT SYSTEMS - GUIDELINES FOR QUALITY PLANS
    17/30344629 DC : 0 BS EN ISO 7971-2 - CEREALS - DETERMINATION OF BULK DENSITY, CALLED MASS PER HECTOLITRE - PART 2: METHOD OF TRACEABILITY FOR MEASURING INSTRUMENTS THROUGH REFERENCE TO THE INTERNATIONAL STANDARD INSTRUMENT
    BS EN ISO 19901-8:2015 Petroleum and natural gas industries. Specific requirements for offshore structures Marine soil investigations
    SAE AS 9133 : 2016 QUALIFICATION PROCEDURE FOR AEROSPACE STANDARD PRODUCTS
    BS ISO 7870-1:2014 Control charts General guidelines
    DIN EN ISO 9073-15:2008-08 TEXTILES - TEST METHODS FOR NONWOVENS - PART 15: DETERMINATION OF AIR PERMEABILITY
    13/30280600 DC : 0 BS ISO 7870-1 - CONTROL CHARTS - PART 1: GENERAL GUIDELINES
    UNE-ISO/TS 9002:2017 Quality management systems -- Guidelines for the application of ISO 9001:2015
    BS EN 60469:2013 Transitions, pulses and related waveforms. Terms, definitions and algorithms
    BS ISO 15790:2004 Graphic technology and photography. Certified reference materials for reflection and transmission metrology. Documentation and procedures for use, including determination of combined standard uncertainty
    AQAP 2131 : 2017 NATO QUALITY ASSURANCE REQUIREMENTS FOR FINAL INSPECTION AND TEST
    07/30135834 DC : 0 ISO 9001 - QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS
    03/317065 DC : DRAFT NOV 2003 ISO/IEC 17025 - GENERAL REQUIREMENTS FOR THE COMPETENCE OF TESTING AND CALIBRATION LABS - AMENDMENT 1
    UNI EN ISO 25424 : 2011 STERILIZATION OF MEDICAL DEVICES - LOW TEMPERATURE STEAM AND FORMALDEHYDE - REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES
    I.S. EN 16910-1:2018 RAILWAY APPLICATIONS - ROLLING STOCK - REQUIREMENTS FOR NON-DESTRUCTIVE TESTING ON RUNNING GEAR IN RAILWAY MAINTENANCE - PART 1: WHEELSETS
    BS EN 16421:2014 Influence of materials on water for human consumption. Enhancement of microbial growth (EMG)
    DIN EN ISO 25178-70:2014-06 GEOMETRICAL PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE: AREAL - PART 70: MATERIAL MEASURES (ISO 25178-70:2014)
    EN IEC 60068-3-5:2018 Environmental testing - Part 3-5: Supporting documentation and guidance - Confirmation of the performance of temperature chambers
    SAE ARP 5812 : 2017 ACTUATORS, LINEAR MECHANICAL, GENERAL SPECIFICATION GUIDE
    BS PD ISO/TR 14969 : 2004 AMD 15958 MEDICAL DEVICES - QUALITY MANAGEMENT SYSTEMS - GUIDANCE ON THE APPLICATION OF ISO 13485:2003
    ASTM E 170 : 2017 : REDLINE Standard Terminology Relating to Radiation Measurements and Dosimetry
    MIL-DTL-6807 Revision F:2012 Switches, Rotary, Selector Power, General Specification for
    10/30219236 DC : DRAFT DEC 2010 BS ISO 22514-7 - STATISTICAL METHODS IN PROCESS MANAGEMENT - CAPABILITY AND PERFORMANCE - PART 7: CAPABILITY OF MEASUREMENT PROCESSES
    BS EN 16653:2015 Rubber or plastics-coated fabrics. Determination of stitch tear resistance (using a needle). Test method
    AECTP-100 : 2016 ENVIRONMENTAL GUIDELINES FOR DEFENCE MATERIEL
    BS EN 16910-1:2018 Railway applications. Rolling stock. Requirements for non-destructive testing on running gear in railway maintenance Wheelsets
    PD CEN/TR 15592:2007 Health services. Quality management systems. Guide for the use of EN ISO 9004:2000 in health services for performance improvement
    UNE-ISO/IEC GUIA 99:2012 IN International vocabulary of metrology. Basics and general concepts and associated terms (VIM)
    MIL-DTL-15291 Revision G:2013 SWITCHES, ROTARY, SNAP ACTION AND DETENT/SPRING RETURN ACTION, GENERAL SPECIFICATION FOR
    UNE-EN 15358:2011 Solid recovered fuels - Quality management systems - Particular requirements for their application to the production of solid recovered fuels
    17/30338806 DC : 0 BS EN ISO 25424 - STERILIZATION OF HEALTH CARE PRODUCTS - LOW TEMPERATURE STEAM AND FORMALDEHYDE - REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES
    PD ISO/TS 16949:2009 Quality management systems. Particular requirements for the application of ISO 9001:2008 for automotive production and relevant service part organizations
    12/30271063 DC : 0 PD ISO/IEC/TS 17021-3 - CONFORMITY ASSESSMENT - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF MANAGEMENT SYSTEMS - PART 3: COMPETENCE REQUIREMENTS FOR AUDITING AND CERTIFICATION OF QUALITY MANAGEMENT SYSTEMS
    S.R. CEN/TR 15592:2007 HEALTH SERVICES - QUALITY MANAGEMENT SYSTEMS - GUIDE FOR THE USE OF EN ISO 9004:2000 IN HEALTH SERVICES FOR PERFORMANCE IMPROVEMENT
    AAMI ISO TIR 14969 : 2004 MEDICAL DEVICES - QUALITY MANAGEMENT SYSTEMS - GUIDANCE ON THE APPLICATION OF ISO 13485:2003
    MIL-STD-3004 Revision D:2014 QUALITY ASSURANCE/SURVEILLANCE FOR FUELS, LUBRICANTS AND RELATED PRODUCTS
    MIL-DTL-55116 Revision D:2013 CONNECTORS: MINIATURE AUDIO, FIVE-PIN AND SIX-PIN - GENERAL SPECIFICATION FOR
    BS EN ISO 9073-16:2008 Textiles. Test methods for nonwovens Determination of resistance to penetration by water (hydrostatic pressure)
    BIS IS/ISO/IEC 17025 : 2005 AMD 1 GENERAL REQUIREMENTS FOR THE COMPETENCE OF TESTING AND CALIBRATION LABORATORIES
    MIL-PRF-23269 Revision H:2016 CAPACITOR, FIXED, GLASS DIELECTRIC, GENERAL SPECIFICATION FOR
    MIL-PRF-49465 Revision C:2007 RESISTOR, FIXED, METAL ELEMENT, POWER TYPE, VERY LOW RESISTANCE VALUES, GENERAL SPECIFICATION FOR
    ISO/IEC Guide 99:2007 International vocabulary of metrology Basic and general concepts and associated terms (VIM)
    MIL-PRF-83446 Revision D:2015 COILS, RADIO-FREQUENCY, CHIP, FIXED OR VARIABLE, GENERAL SPECIFICATION FOR
    MIL-PRF-26 Revision H:2006 RESISTOR, FIXED, WIREWOUND (POWER TYPE), GENERAL SPECIFICATION FOR
    I.S. EN 60469:2013 TRANSITIONS, PULSES AND RELATED WAVEFORMS - TERMS, DEFINITIONS AND ALGORITHMS (IEC 60469:2013 (EQV))
    14/30257644 DC : 0 BS EN ISO 13485 - MEDICAL DEVICES - QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS FOR REGULATORY PURPOSES
    BS ISO 18899:2013 Rubber. Guide to the calibration of test equipment
    BS EN ISO 25178-70:2014 Geometrical product specification (GPS). Surface texture: Areal Material measures
    CSA Z11135-1 : 2009 : R2014 STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - PART 1: REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES
    CSA ISO 14937 : 2011 : R2016 STERILIZATION OF HEALTH CARE PRODUCTS - GENERAL REQUIREMENTS FOR CHARACTERIZATION OF A STERILIZING AGENT AND THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES
    MIL-PRF-22097 Revision J:2007 RESISTOR, VARIABLE, NONWIREWOUND, ADJUSTMENT TYPE, GENERAL SPECIFICATION FOR
    DIN EN 16001 E : 2009 ENERGY MANAGEMENT SYSTEMS - REQUIREMENTS WITH GUIDANCE FOR USE
    I.S. EN ISO 9073-5:2008 TEXTILES - TEST METHODS FOR NONWOVENS - PART 5: DETERMINATION OF RESISTANCE TO MECHANICAL PENETRATION (BALL BURST PROCEDURE)
    MIL-PRF-39019 Revision F:2010 CIRCUIT BREAKERS, MAGNETIC, LOW-POWER SEALED, TRIP-FREE, GENERAL SPECIFICATION FOR
    UNI ISO 22514-7:2014 STATISTICAL METHODS IN PROCESS MANAGEMENT - CAPABILITY AND PERFORMANCE - PART 7: CAPABILITY OF MEASUREMENT PROCESSES
    NF EN 60861 : 2008 EQUIPMENT FOR MONITORING OF RADIONUCLIDES IN LIQUID EFFLUENTS AND SURFACE WATERS
    CSA C392 : 2011 : R2016 TESTING OF THREE-PHASE SQUIRREL CAGE INDUCTION MOTORS DURING REFURBISHMENT
    BS EN 60068-3-5:2002 Environmental testing. Guidance Confirmation of the performance of temperature chambers
    ISO 21247:2005 Combined accept-zero sampling systems and process control procedures for product acceptance
    SAE ARP 5483/5 : 2013 ROLLING ELEMENT BEARING TEST METHOD FOR RADIAL LIMIT AND FRACTURE LOAD TESTING
    ISO 14470:2011 Food irradiation — Requirements for the development, validation and routine control of the process of irradiation using ionizing radiation for the treatment of food
    EN 14726:2005 Aluminium and aluminium alloys - Chemical analysis - Guideline for spark optical emission spectrometric analysis
    SAE ARP 4058 : 2017 GENERAL SPECIFICATION GUIDE FOR MECHANICAL GEARED ROTARY ACTUATORS
    CSA Z17665-1:09 (R2019) Sterilization of health care products - Moist heat - Part 1: Requirements for the development, validation and routine control of a sterilization process for medical devices (Adopted ISO 17665-1:2006, first edition, 2006-08-15, with Canadian deviations)
    BS EN ISO 9073-18:2008 Textiles. Test methods for nonwovens Determination of breaking strength and elongation of nonwoven materials using the grab tensile test
    SAE ARP 5945 : 2017 ENDURANCE TIME TEST PROCEDURES FOR SAE TYPE 1 AIRCRAFT DEICING/ANTI-ICING FLUIDS
    CAN/CSA-ISO 11137-3:17 Sterilization of health care products — Radiation — Part 3: Guidance on dosimetric aspects of development, validation and routine control (Adopted ISO 11137-3:2017, second edition, 2017-06)
    AAMI ISO 14937:2009 STERILIZATION OF HEALTH CARE PRODUCTS - GENERAL REQUIREMENTS FOR CHARACTERIZATION OF A STERILIZING AGENT AND THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES
    ANSI/AAMI ISO 17665-1:2006(R2013) STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES
    I.S. EN ISO 22476-4:2012 GEOTECHNICAL INVESTIGATION AND TESTING - FIELD TESTING - PART 4: MENARD PRESSUREMETER TEST (ISO 22476-4:2012)
    AAMI TIR56:2013(R2020) GUIDANCE FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF AN ETHYLENE OXIDE STERILIZATION PROCESS UTILIZING FLEXIBLE BAG SYSTEMS FOR THE STERILIZATION OF MEDICAL DEVICES
    CSA Z17665-1 : 2009 : R2014 STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES
    MIL-PRF-32560 Base Document:2016 COIL, RADIO FREQUENCY, SURFACE MOUNT, FIXED ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR
    I.S. EN 15224:2016 QUALITY MANAGEMENT SYSTEMS - EN ISO 9001:2015 FOR HEALTHCARE
    UNI EN ISO 25178-70 : 2014 GEOMETRICAL PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE: AREAL - PART 70: MATERIAL MEASURES
    AAMI ISO 11135-1 : 2007 STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES
    ISO 7971-2:2009 Cereals Determination of bulk density, called mass per hectolitre Part 2: Method of traceability for measuring instruments through reference to the international standard instrument
    ISO 7870-1:2014 Control charts Part 1: General guidelines
    ISO 17884:2004 Ships and marine technology Searchlights for high-speed craft
    AQAP 2130 : 2009-11 NATO QUALITY ASSURANCE REQUIREMENTS FOR INSPECTION AND TEST
    AAMI ST15883-1 : 2009 WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS
    I.S. EN 9137:2012 QUALITY MANAGEMENT SYSTEMS - GUIDANCE FOR THE APPLICATION OF AQAP 2110 WITHIN AN EN 9100 QUALITY MANAGEMENT SYSTEM
    I.S. EN ISO 9073-16:2008 TEXTILES - TEST METHODS FOR NONWOVENS - PART 16: DETERMINATION OF RESISTANCE TO PENETRATION BY WATER (HYDROSTATIC PRESSURE)
    AASHTO T 314 : 2012 METHOD OF TEST FOR DETERMINING THE FRACTURE PROPERTIES OF ASPHALT BINDER IN DIRECT TENSION (DT)
    UNI EN ISO 22476-5 : 2013 GEOTECHNICAL INVESTIGATION AND TESTING - FIELD TESTING - PART 5: FLEXIBLE DILATOMETER TEST
    ASTM E 1742/E1742M : 2018 : REDLINE Standard Practice for Radiographic Examination
    ISO Guide 34:2009 General requirements for the competence of reference material producers
    ISO 11737-2:2009 Sterilization of medical devices Microbiological methods Part 2: Tests of sterility performed in the definition, validation and maintenance of a sterilization process
    ISO/TR 12888:2011 Selected illustrations of gauge repeatability and reproducibility studies
    EN ISO 7971-2:2009 Cereals - Determination of bulk density, called mass per hectolitre - Part 2: Method of traceability for measuring instruments through reference to the international standard instrument (ISO 7971-2:2009)
    I.S. EN 16001:2009 ENERGY MANAGEMENT SYSTEMS - REQUIREMENTS WITH GUIDANCE FOR USE
    DIN EN 295-2:2013-05 VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 2: EVALUATION OF CONFORMITY AND SAMPLING
    ONORM EN ISO 14160 : 2011 STERILIZATION OF HEALTH CARE PRODUCTS - LIQUID CHEMICAL STERILIZING AGENTS FOR SINGLE-USE MEDICAL DEVICES UTILIZING ANIMAL TISSUES AND THEIR DERIVATIVES - REQUIREMENTS FOR CHARACTERIZATION, DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES (ISO 14160:2011)
    DIN EN 14276-1:2011-05 PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS
    DIN EN ISO 13934-1:2013-08 TEXTILES - TENSILE PROPERTIES OF FABRICS - PART 1: DETERMINATION OF MAXIMUM FORCE AND ELONGATION AT MAXIMUM FORCE USING THE STRIP METHOD (ISO 13934-1:2013)
    BS EN ISO 13936-2:2004 Textiles. Determination of the slippage resistance of yarns at a seam in woven fabrics Fixed load method
    BS EN 14726:2005 Aluminium and aluminium alloys. Chemical analysis. Guideline for spark optical emission spectrometric analysis
    ISO 19901-8:2014 Petroleum and natural gas industries — Specific requirements for offshore structures — Part 8: Marine soil investigations
    UNE-EN ISO 13935-2:2014 Textiles - Seam tensile properties of fabrics and made-up textile articles - Part 2: Determination of maximum force to seam rupture using the grab method (ISO 13935-2:2014)
    IEC 62047-25:2016 Semiconductor devices - Micro-electromechanical devices - Part 25: Silicon based MEMS fabrication technology - Measurement method of pull-press and shearing strength of micro bonding area
    UNE-EN ISO 13934-1:2013 Textiles - Tensile properties of fabrics - Part 1: Determination of maximum force and elongation at maximum force using the strip method (ISO 13934-1:2013)
    ISO 15883-1:2006 Washer-disinfectors Part 1: General requirements, terms and definitions and tests
    ISO 10019:2005 Guidelines for the selection of quality management system consultants and use of their services
    EN 14276-1:2020 Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General requirements
    UNE-EN ISO 14160:2012 Sterilization of health care products - Liquid chemical sterilizing agents for single-use medical devices utilizing animal tissues and their derivatives - Requirements for characterization, development, validation and routine control of a sterilization process for medical devices (ISO 14160:2011)
    NASA KSC E 165 : 2009 ELECTRICAL GROUND SUPPORT EQUIPMENT FABRICATION, SPECIFICATION FOR
    MIL-STD-981 Revision C:2010 DESIGN, MANUFACTURING AND QUALITY STANDARDS FOR CUSTOM ELECTROMAGNETIC DEVICES FOR SPACE APPLICATIONS
    I.S. EN ISO 11737-2:2009 STERILIZATION OF MEDICAL DEVICES - MICROBIOLOGICAL METHODS - PART 2: TESTS OF STERILITY PERFORMED IN THE DEFINITION, VALIDATION AND MAINTENANCE OF A STERILIZATION PROCESS
    ONORM EN ISO 11737-2 : 2010 STERILIZATION OF MEDICAL DEVICES - MICROBIOLOGICAL METHODS - PART 2: TESTS OF STERILITY PERFORMED IN THE DEFINITION, VALIDATION AND MAINTENANCE OF A STERILIZATION PROCESS
    GEIA STD 0006 : 2008 REQUIREMENTS FOR USING ROBOTIC HOT SOLDER DIP TO REPLACE THE FINISH ON ELECTRONIC PIECE PARTS
    CSA ISO 19901-8 : 2015 PETROLEUM AND NATURAL GAS INDUSTRIES - SPECIFIC REQUIREMENTS FOR OFFSHORE STRUCTURES - PART 8: MARINE SOIL INVESTIGATIONS
    UNI EN 14276-1 : 2011 PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS
    ONORM EN 14276-1 : 2011 PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS
    EIA 557 : 2006 STATISTICAL PROCESS CONTROL SYSTEMS
    CSA ISO 19901-8:15 (R2020) Petroleum and natural gas industries — Specific requirements for offshore structures — Part 8: Marine soil investigations (Adopted ISO 19901-8:2014, first edition, 2014-12-01)
    I.S. EN ISO 9000:2015 QUALITY MANAGEMENT SYSTEMS - FUNDAMENTALS AND VOCABULARY (ISO 9000:2015)
    I.S. EN ISO 15883-1:2009 WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS (ISO 15883-1:2006)
    EN ISO 9073-5 : 2008 Textiles - Test methods for nonwovens - Part 5: Determination of resistance to mechanical penetration (ball burst procedure) (ISO 9073-5:2008)
    EN 16001:2009 Energy management systems - Requirements with guidance for use
    EN ISO 22476-12:2009 Geotechnical investigation and testing - Field testing - Part 12: Mechanical cone penetration test (CPTM) (ISO 22476-12:2009)
    EN ISO 15589-1:2017 Petroleum, petrochemical and natural gas industries - Cathodic protection of pipeline systems - Part 1: On-land pipelines (ISO 15589-1:2015, Corrected version 2020-11)
    UNI EN ISO 15883-1 : 2014 WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS
    UNI EN ISO 13935-1 : 2014 TEXTILES - SEAM TENSILE PROPERTIES OF FABRICS AND MADE-UP TEXTILE ARTICLES - PART 1: DETERMINATION OF MAXIMUM FORCE TO SEAM RUPTURE USING THE STRIP METHOD
    UNI EN ISO 14937 : 2009 STERILIZATION OF HEALTH CARE PRODUCTS - GENERAL REQUIREMENTS FOR CHARACTERIZATION OF A STERILIZING AGENT AND THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES
    UNI EN ISO 13935-2 : 2014 TEXTILES - SEAM TENSILE PROPERTIES OF FABRICS AND MADE-UP TEXTILE ARTICLES - PART 2: DETERMINATION OF MAXIMUM FORCE TO SEAM RUPTURE USING THE GRAB METHOD
    UNI EN 14343 : 2006 ROTARY POSITIVE DISPLACEMENT PUMPS - PERFORMANCE TESTS FOR ACCEPTANCE
    UNI EN ISO 13934-1 : 2013 TEXTILES - TENSILE PROPERTIES OF FABRICS - PART 1: DETERMINATION OF MAXIMUM FORCE AND ELONGATION AT MAXIMUM FORCE USING THE STRIP METHOD
    AQAP 2120 : 2009-10 NATO QUALITY ASSURANCE REQUIREMENTS FOR PRODUCTION
    UNE-EN ISO 22476-4:2016 Geotechnical investigation and testing - Field testing - Part 4: Ménard pressuremeter test (ISO 22476-4:2012)
    14/30292497 DC : 0 BS EN ISO 22476-9 - GROUND INVESTIGATION AND TESTING - FIELD TESTING - PART 9: FIELD VANE TEST
    DIN EN ISO 20857 E : 2013 STERILIZATION OF HEALTH CARE PRODUCTS - DRY HEAT - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES (ISO 20857:2010)
    UNI EN ISO 9073-18 : 2008 TEXTILES - TEST METHODS FOR NONWOVENS - PART 18: DETERMINATION OF BREAKING STRENGTH AND ELONGATION OF NONWOVEN MATERIALS USING THE GRAB TENSILE TEST
    MIL-DTL-55302 Revision G:2009 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES
    BIS IS/ISO/TS 16949 : 2009 QUALITY MANAGEMENT SYSTEMS - PARTICULAR REQUIREMENTS FOR THE APPLICATION OF ISO 9001:2008 FOR AUTOMOTIVE PRODUCTION AND RELEVANT SERVICE PART ORGANIZATIONS
    MIL-DTL-27715 Revision C:2014 Circuit Breaker, Trip-Free, High Temperature, Aircraft General Specification for
    DIN EN ISO 25424:2011-09 STERILIZATION OF MEDICAL DEVICES - LOW TEMPERATURE STEAM AND FORMALDEHYDE - REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES
    BS ISO 18322:2017 Space systems. General management requirements for space test centres
    13/30264511 DC : 0 BS ISO/ASTM 52628 - STANDARD PRACTICE FOR DOSIMETRY IN RADIATION PROCESSING
    DIN EN 16421 E : 2015 INFLUENCE OF MATERIALS ON WATER FOR HUMAN CONSUMPTION - ENHANCEMENT OF MICROBIAL GROWTH (EMG)
    MIL-PRF-19978 Revision L:2016 Capacitor, Fixed, Plastic (or Paper-Plastic) Dielectric (Hermetically Sealed in Metal, Ceramic or Glass Cases), Established and Non-Established Reliability, General Specification for
    MIL-DTL-12211 Revision G:2009 Switch, Pressure
    BS EN ISO 25424:2011 Sterilization of medical devices. Low temperature steam and formaldehyde. Requirements for development, validation and routine control of a sterilization process for medical devices
    PREN 295-2 : DRAFT 2010 VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 2: EVALUATION OF CONFORMITY AND SAMPLING
    I.S. EN IEC 60068-3-6:2018 COR 2018 ENVIRONMENTAL TESTING - PART 3-6: SUPPORTING DOCUMENTATION AND GUIDANCE - CONFIRMATION OF THE PERFORMANCE OF TEMPERATURE/HUMIDITY CHAMBERS (IEC 60068-3-6:2018)
    MIL R 5757 : K RELAYS, ELECTROMAGNETIC, GENERAL SPECIFICATION FOR
    PD ISO Guide 34:2009 General requirements for the competence of reference material producers
    09/30206982 DC : 0 BS EN 9137 - QUALITY MANAGEMENT SYSTEMS - GUIDANCE FOR THE APPLICATION OF AQAP 2110 WITHIN AN 9100:2009 QUALITY MANAGEMENT SYSTEM
    ISO 10005:2005 Quality management systems Guidelines for quality plans
    IEC 62303:2008 Radiation protection instrumentation - Equipment for monitoring airborne tritium
    BS 7755-1.2:1999 Soil quality. Terminology and classification Terms and definitions relating to sampling
    UNI EN ISO 11135 : 2014 STERILIZATION OF HEALTH-CARE PRODUCTS - ETHYLENE OXIDE - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES
    AAMI ISO 11737-1 : 2006 STERILIZATION OF MEDICAL DEVICES - MEDICAL DEVICES - PART 1: DETERMINATION OF THE POPULATION OF MICROORGANISMS ON PRODUCT
    MIL-DTL-24308 Revision G:2009 Connectors, Electric, Rectangular, Nonenvironmental, Miniature, Polarized Shell, Rack and Panel, General Specification for
    SAE ARP 5448/3 : 2016 PLAIN BEARING LOW SPEED OSCILLATION TEST
    I.S. CEN ISO TR 14969:2005 MEDICAL DEVICES - QUALITY MANAGEMENT SYSTEMS - GUIDANCE ON THE APPLICATION OF ISO 13485: 2003
    10/30216987 DC : 0 BS EN 295-2 - VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 2: EVALUATION OF CONFORMITY AND SAMPLING
    MIL-C-11015 Revision F:2008 CAPACITOR, FIXED, CERAMIC DIELECTRIC (GENERAL PURPOSE), GENERAL SPECIFICATION FOR
    I.S. EN ISO 11135-1:2007 STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - PART 1: REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES
    MIL-PRF-23648 Revision F:2005 Resistor, Thermal (Thermistor) Insulated, General Specification for
    I.S. EN ISO 22476-1:2012 GEOTECHNICAL INVESTIGATION AND TESTING - FIELD TESTING - PART 1: ELECTRICAL CONE AND PIEZOCONE PENETRATION TEST (ISO 22476-1:2012)
    MIL-PRF-32222 Revision A:2016 HEATER, VEHICULAR COMPARTMENT MULTIFUEL BURNING 24 VOLT, DC 15,000 - 30,000 BTU/HR
    MIL-DTL-83739 Revision D:2012 SWITCHES, ANTENNA, RADIO FREQUENCY, SOLID-STATE, GENERAL SPECIFICATION FOR
    16/30334735 DC : 0 BS EN 15224 - HEALTH CARE SERVICES - QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS BASED ON EN ISO 9001:2015
    DIN EN ISO 9073-18 E : 2008 TEXTILES - TEST METHODS FOR NONWOVENS - PART 18: DETERMINATION OF BREAKING STRENGTH AND ELONGATION OF NONWOVEN MATERIALS USING THE GRAB TENSILE TEST
    BS IEC 60861 : 2006 EQUIPMENT FOR MONITORING OF RADIONUCLIDES IN LIQUID EFFLUENTS AND SURFACE WATERS
    UNE-EN ISO 20857:2013 Sterilization of health care products - Dry heat - Requirements for the development, validation and routine control of a sterilization process for medical devices (ISO 20857:2010)
    I.S. EN ISO 20857:2013 STERILIZATION OF HEALTH CARE PRODUCTS - DRY HEAT - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES (ISO 20857:2010)
    I.S. EN ISO 7971-2:2009 CEREALS - DETERMINATION OF BULK DENSITY, CALLED MASS PER HECTOLITRE - PART 2: METHOD OF TRACEABILITY FOR MEASURING INSTRUMENTS THROUGH REFERENCE TO THE INTERNATIONAL STANDARD INSTRUMENT
    MIL-PRF-15305 Revision F:2013 COILS, ELECTRICAL, FIXED AND VARIABLE, RADIO FREQUENCY, GENERAL SPECIFICATION FOR
    MIL-DTL-8416 Revision C:2005 ADAPTER, HEADSET-MICROPHONE MX-1646()/AIC
    DIN EN 16653 E : 2015 RUBBER OR PLASTICS-COATED FABRICS - DETERMINATION OF STITCH TEAR RESISTANCE (USING A NEEDLE) - TEST METHOD
    SAE ARP 5483/6 : 2013 ROLLING ELEMENT BEARING TEST METHOD FOR DIMENSIONAL STABILITY
    BS ISO 19922:2005 Ships and marine technology. Fire resistance of metallic pipe components with resilient and elastomeric seals. Requirements on the test bench
    MIL-PRF-19 Revision E:2007 RESISTOR, VARIABLE, WIREWOUND (LOW OPERATING TEMPERATURE), GENERAL SPECIFICATION FOR
    MIL-PRF-11021 Revision J:2016 SWITCH, VEHICULAR LIGHTS: 28 VOLT DC
    MIL-STD-790 Revision G:2011 ESTABLISHED RELIABILITY AND HIGH RELIABILITY QUALIFIED PRODUCTS LIST (QPL) SYSTEMS FOR ELECTRICAL, ELECTRONIC, AND FIBER OPTIC PARTS SPECIFICATIONS
    MIL-PRF-39023 Revision D:2006 RESISTOR, VARIABLE, NONWIREWOUND, PRECISION, GENERAL SPECIFICATION FOR
    MIL-PRF-11693 Revision E:2012 CAPACITOR, FEED THROUGH, RADIO-INTERFERENCE REDUCTION, DC (HERMETICALLY SEALED IN METAL CASES), ESTABLISHED AND NON-ESTABLISHED RELIABILITY GENERAL SPECIFICATION FOR
    17/30351224 DC : 0 BS EN 14276-1 - PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS
    14/30273523 DC : 0 BS EN ISO 9001 - QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS
    UNE-CEN/TR 15983:2011 IN Stationary source emissions - Guidance on the application of EN 14181:2004
    BS ISO 10005:2005 Quality management systems. Guidelines for quality plans
    I.S. EN ISO 17034:2016 GENERAL REQUIREMENTS FOR THE COMPETENCE OF REFERENCE MATERIAL PRODUCERS (ISO 17034:2016)
    PD ISO/TR 12888:2011 Selected illustrations of gauge repeatability and reproducibility studies
    BS EN ISO 22476-4:2012 Geotechnical investigation and testing. Field testing Ménard pressuremeter test
    DIN EN ISO 22476-4:2013-03 Geotechnical investigation and testing - Field testing - Part 4: M?nard pressuremeter test (ISO 22476-4:2012); German version EN ISO 22476-4:2012
    07/30164697 DC : 0 ISO 20857 - STERILIZATION OF HEALTH CARE PRODUCTS - DRY HEAT - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF AN INDUSTRIAL STERILIZATION PROCESS FOR MEDICAL DEVICES
    MIL-DTL-83733 Revision E:2006 CONNECTORS, ELECTRICAL MINIATURE, RECTANGULAR TYPE, RACK TO PANEL, ENVIRONMENT RESISTING, 200 DEGREES C TOTAL CONTINUOUS OPERATING TEMPERATURE, GENERAL SPECIFICATION FOR
    03/314215 DC : DRAFT OCT 2003 ISO TR 14969 - MEDICAL DEVICES - QUALITY MANAGEMENT SYSTEMS - GUIDANCE ON THE APPLICATION OF ISO 13485:2003
    MIL-DTL-8834 Revision K:2016 Switches, Toggle, Positive Break, General Specification for
    PREN 474-11 : DRAFT 2017 EARTH-MOVING MACHINERY - SAFETY - PART 11: REQUIREMENTS FOR EARTH AND LANDFILL COMPACTORS
    PD CEN/TR 16792:2014 Safety of children\'s clothing. Recommendations for the design and manufacture of children\'s clothing. Mechanical safety
    MIL-DTL-83522 Revision E:2013 Connectors, Fiber Optic, Single Ferrule, General Specification for
    DD CEN/TS 15358:2006 Solid recovered fuels. Quality management systems. Particular requirements for their application to the production of solid recovered fuels
    EEMUA 205 : 2008 GUIDE TO THE PRODUCTION TESTING OF VALVES FOR THE ENERGY, PROCESS AND RELATED INDUSTRIES
    MIL-C-18312 Revision G:2013 CAPACITOR, FIXED, METALLIZED (PAPER-PLASTIC, OR PLASTIC FILM) DIELECTRIC, DIRECT CURRENT (HERMETICALLY SEALED IN METAL CASES), GENERAL SPECIFICATION FOR
    BS EN 61744:2005 Calibration of fibre optic chromatic dispersion test sets
    NF EN ISO 22476-12 : 2010 GEOTECHNICAL INVESTIGATION AND TESTING - FIELD TESTING - PART 12: MECHANICAL CONE PENETRATION TEST (CPTM)
    I.S. EN 14726:2005 ALUMINIUM AND ALUMINIUM ALLOYS - CHEMICAL ANALYSIS - GUIDELINE FOR SPARK OPTICAL EMISSION SPECTROMETRIC ANALYSIS
    CSA ISO 9004 : 2009 MANAGING FOR THE SUSTAINED SUCCESS OF AN ORGANIZATION - A QUALITY MANAGEMENT APPROACH
    CSA ISO/TR 10017 : 2003 : R2013 GUIDANCE ON STATISTICAL TECHNIQUES FOR ISO 9001:2000
    SAE AS 47643 : 2017 VERIFICATION METHODS FOR MIL-STD-1760E AIRCRAFT STATION INTERFACES
    UNI CEN ISO/TS 29001 : 2011 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - SECTOR-SPECIFIC QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS FOR PRODUCT AND SERVICE SUPPLY ORGANIZATIONS
    CSA ISO TR 14969 : 2005 : R2015 MEDICAL DEVICES - QUALITY MANAGEMENT SYSTEMS - GUIDANCE ON THE APPLICATION OF ISO 13485:2003
    UNI EN ISO 22476-7 : 2013 GEOTECHNICAL INVESTIGATION AND TESTING - FIELD TESTING - PART 7: BOREHOLE JACK TEST
    S.R. CEN TR 15983:2010 STATIONARY SOURCE EMISSIONS - GUIDANCE ON THE APPLICATION OF EN 14181:2004
    CSA ISO 9000 : 2016 QUALITY MANAGEMENT SYSTEMS - FUNDAMENTALS AND VOCABULARY
    PD ISO/TR 10017:2003 Guidance on statistical techniques for ISO 9001:2000
    DIN EN ISO 22476-7:2013-03 GEOTECHNICAL INVESTIGATION AND TESTING - FIELD TESTING - PART 7: BOREHOLE JACK TEST (ISO 22476-7:2012)
    ANSI/AAMI/ISO 14160:2011(R2016) STERILIZATION OF HEALTH CARE PRODUCTS - LIQUID CHEMICAL STERILIZING AGENTS FOR SINGLE-USE MEDICAL DEVICES UTILIZING ANIMAL TISSUES AND THEIR DERIVATIVES - REQUIREMENTS FOR CHARACTERIZATION, DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES
    EN ISO 14160:2011 Sterilization of health care products - Liquid chemical sterilizing agents for single-use medical devices utilizing animal tissues and their derivatives - Requirements for characterization, development, validation and routine control of a sterilization process for medical devices (ISO 14160:2011)
    UNE-EN 16653:2015 Rubber or plastics-coated fabrics - Determination of stitch tear resistance (using a needle) - Test method
    CSA ISO 10005 : 2005 QUALITY MANAGEMENT SYSTEMS - GUIDELINES FOR QUALITY PLANS
    UNI CEI 70099 : 2008 INTERNATIONAL VOCABULARY OF METROLOGY - BASIC AND GENERAL CONCEPTS AND ASSOCIATED TERMS (VIM)
    UNI EN ISO 20857 : 2013 STERILIZATION OF HEALTH CARE PRODUCTS - DRY HEAT - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES
    DIN EN ISO 9073-18:2008-08 Textiles - Test methods for nonwovens - Part 18: Determination of breaking strength and elongation of nonwoven materials using the grab tensile test (ISO 9073-18:2007)
    CSA ISO TR 14969 :2005 MEDICAL DEVICES - QUALITY MANAGEMENT SYSTEMS - GUIDANCE ON THE APPLICATION OF ISO 13485:2003
    CSA Z11135-1 : 2009 : FR STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - PART 1: REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES
    ASTM E 1417/E1417M : 2016 : REDLINE Standard Practice for Liquid Penetrant Testing
    UNE-EN ISO 11135:2015 Sterilization of health-care products - Ethylene oxide - Requirements for the development, validation and routine control of a sterilization process for medical devices (ISO 11135:2014)
    DIN EN ISO 20857:2013-08 Sterilization of health care products - Dry heat - Requirements for the development, validation and routine control of a sterilization process for medical devices (ISO 20857:2010)
    BIS IS/ISO 9000 : 2015 QUALITY MANAGEMENT SYSTEMS - FUNDAMENTALS AND VOCABULARY
    BS EN ISO 11135:2014 Sterilization of health-care products. Ethylene oxide. Requirements for the development, validation and routine control of a sterilization process for medical devices
    SAE ARP 5483/1 : 2012 ROLLING ELEMENT BEARING NO-LOAD TORQUE TEST
    SAE ARP 986 : 2015 GUIDE FOR QUALIFICATION TESTING OF AIRCRAFT AIR VALVES
    I.S. EN ISO 19901-8:2015 PETROLEUM AND NATURAL GAS INDUSTRIES - SPECIFIC REQUIREMENTS FOR OFFSHORE STRUCTURES - PART 8: MARINE SOIL INVESTIGATIONS (ISO 19901-8:2014)
    CEI UNI EN ISO 17034 : 1ED 2018 GENERAL REQUIREMENTS FOR THE COMPETENCE OF REFERENCE MATERIAL PRODUCERS
    PREN 15224 : DRAFT 2016 HEALTH CARE SERVICES - QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS BASED ON EN ISO 9001:2015
    ISO/TR 14969:2004 Medical devices Quality management systems Guidance on the application of ISO 13485: 2003
    SAE ARP 5483/4 : 2013 ROLLING ELEMENT TEST METHOD FOR AXIAL LIMIT AND FRACTURE LOAD TESTING
    ISO/TR 230-11:2018 Test code for machine tools Part 11: Measuring instruments suitable for machine tool geometry tests
    BS EN ISO 7971-2:2009 Cereals. Determination of bulk density, called mass per hectolitre Method of traceability for measuring instruments through reference to the international standard instrument
    ISO 15589-1:2015 Petroleum, petrochemical and natural gas industries — Cathodic protection of pipeline systems — Part 1: On-land pipelines
    ISO 18322:2017 Space systems — General management requirements for space test centres
    BS ISO 17034 : 2016 GENERAL REQUIREMENTS FOR THE COMPETENCE OF REFERENCE MATERIAL PRODUCERS
    EN 16910-1:2018 Railway applications - Rolling stock - Requirements for non-destructive testing on running gear in railway maintenance - Part 1: Wheelsets
    AQAP 2000 : 2009 NATO POLICY ON AN INTEGRATED SYSTEMS APPROACH TO QUALITY THROUGH THE LIFE CYCLE
    ISO 13485 - PRACTICAL GUIDE : 2016 ISO 13485:2016 - MEDICAL DEVICES - A PRACTICAL GUIDE
    ASTM E 2033 : 2017 : REDLINE Standard Practice for Radiographic Examination Using Computed Radiography (Photostimulable Luminescence Method)
    S.R. ISO/TR 10017:2003 GUIDANCE ON STATISTICAL TECHNIQUES FOR ISO 9001:2000
    ISO/ASTM 51649:2015 Practice for dosimetry in an electron beam facility for radiation processing at energies between 300 keV and 25 MeV
    IEC 60068-3-6 REDLINE : 2.0 ENVIRONMENTAL TESTING - PART 3-6: SUPPORTING DOCUMENTATION AND GUIDANCE - CONFIRMATION OF THE PERFORMANCE OF TEMPERATURE/HUMIDITY CHAMBERS
    EN ISO 9004:2018 Quality management - Quality of an organization - Guidance to achieve sustained success (ISO 9004:2018)
    ISO 19922:2005 Ships and marine technology Fire resistance of metallic pipe components with resilient and elastomeric seals Requirements imposed on the test bench
    ISO 16762:2016 Graphic technology Post-press General requirements for transfer, handling and storage
    ISO 18899:2013 Rubber — Guide to the calibration of test equipment
    ISO/IEC 17025:2017 General requirements for the competence of testing and calibration laboratories
    ISO 18602:2013 Packaging and the environment — Optimization of the packaging system
    I.S. EN ISO 15378:2017 PRIMARY PACKAGING MATERIALS FOR MEDICINAL PRODUCTS - PARTICULAR REQUIREMENTS FOR THE APPLICATION OF ISO 9001:2015, WITH REFERENCE TO GOOD MANUFACTURING PRACTICE (GMP) (ISO 15378:2017)
    IEC 60068-3-6:2018 Environmental testing - Part 3-6: Supporting documentation and guidance - Confirmation of the performance of temperature/ humidity chambers
    I.S. EN 62209-2:2010 HUMAN EXPOSURE TO RADIO FREQUENCY FIELDS FROM HAND-HELD AND BODYMOUNTED WIRELESS COMMUNICATION DEVICES - HUMAN MODELS, INSTRUMENTATION, AND PROCEDURES - PART 2: PROCEDURE TO DETERMINE THE SPECIFIC ABSORPTION RATE (SAR) FOR WIRELESS COMMUNICATION DEVICES USED IN CLOSE PROXIMITY TO THE HUMAN BODY (FREQUENCY RANGE OF 30 MHZ TO 6 GHZ)
    ISO/TR 18532:2009 Guidance on the application of statistical methods to quality and to industrial standardization
    IEC 60861:2006 Equipment for monitoring of radionuclides in liquid effluents and surface waters
    UNE-EN ISO 15883-1:2009 Washer-disinfectors - Part 1: General requirements, terms and definitions and tests (ISO 15883-1:2006)
    DIN EN ISO 9000:2015-11 QUALITY MANAGEMENT SYSTEMS - FUNDAMENTALS AND VOCABULARY (ISO 9000:2015)
    DIN EN ISO 14160:2011-10 Sterilization of health care products - Liquid chemical sterilizing agents for single-use medical devices utilizing animal tissues and their derivatives - Requirements for characterization, development, validation and routine control of a sterilization process for medical devices (ISO 14160:2011)
    DIN EN 14704-1 E : 2005 DETERMINATION OF THE ELASTICITY OF FABRICS - PART 1: STRIP TESTS
    DIN EN ISO 13935-2:2014-07 TEXTILES - SEAM TENSILE PROPERTIES OF FABRICS AND MADE-UP TEXTILE ARTICLES - PART 2: DETERMINATION OF MAXIMUM FORCE TO SEAM RUPTURE USING THE GRAB METHOD (ISO 13935-2:2014)
    DIN EN ISO 13935-1:2014-07 TEXTILES - SEAM TENSILE PROPERTIES OF FABRICS AND MADE-UP TEXTILE ARTICLES - PART 1: DETERMINATION OF MAXIMUM FORCE TO SEAM RUPTURE USING THE STRIP METHOD (ISO 13935-1:2014)
    DIN EN 14704-2 E : 2007 DETERMINATION OF THE ELASTICITY OF FABRICS - PART 2: MULTIAXIAL TESTS
    DIN EN ISO 13485:2016-08 Medical devices - Quality management systems - Requirements for regulatory purposes (ISO 13485:2016)
    ISO 14937:2009 Sterilization of health care products General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices
    BS EN 12258-2:2004 Aluminium and aluminium alloys. Terms and definitions Chemical analysis
    BS EN 14704-1:2005 Determination of the elasticity of fabrics Strip tests
    ISO 20857:2010 Sterilization of health care products Dry heat Requirements for the development, validation and routine control of a sterilization process for medical devices
    ISO 22000:2005 Food safety management systems Requirements for any organization in the food chain
    ISO 13936-2:2004 Textiles — Determination of the slippage resistance of yarns at a seam in woven fabrics — Part 2: Fixed load method
    ISO 13934-1:2013 Textiles — Tensile properties of fabrics — Part 1: Determination of maximum force and elongation at maximum force using the strip method
    ISO 9073-16:2007 Textiles Test methods for nonwovens Part 16: Determination of resistance to penetration by water (hydrostatic pressure)
    UNE-EN 1776:2017 Gas infrastructure - Gas measuring systems - Functional requirements
    EN ISO 11737-2:2009 Sterilization of medical devices - Microbiological methods - Part 2: Tests of sterility performed in the definition, validation and maintenance of a sterilization process (ISO 11737-2:2009)
    BS EN ISO 17665-1:2006 Sterilization of health care products. Moist heat Requirements for the development, validation and routine control of a sterilization process for medical devices
    BS EN ISO 14937:2009 Sterilization of health care products. General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices
    BS EN 1776:2015 Gas infrastructure. Gas measuring systems. Functional requirements
    ISO 13935-2:2014 Textiles — Seam tensile properties of fabrics and made-up textile articles — Part 2: Determination of maximum force to seam rupture using the grab method
    UNE-EN ISO 13485:2016 Medical devices - Quality management systems - Requirements for regulatory purposes (ISO 13485:2016)
    ISO 22476-1:2012 Geotechnical investigation and testing — Field testing — Part 1: Electrical cone and piezocone penetration test
    ISO 17665-1:2006 Sterilization of health care products — Moist heat — Part 1: Requirements for the development, validation and routine control of a sterilization process for medical devices
    ISO 13936-1:2004 Textiles — Determination of the slippage resistance of yarns at a seam in woven fabrics — Part 1: Fixed seam opening method
    ISO/IEC TS 17021-3:2013 Conformity assessment Requirements for bodies providing audit and certification of management systems Part 3: Competence requirements for auditing and certification of quality management systems
    ISO 22476-4:2012 Geotechnical investigation and testing Field testing Part 4: Mnard pressuremeter test
    IEC 61744:2005 Calibration of fibre optic chromatic dispersion test sets
    BS EN ISO 13935-1:2014 Textiles. Seam tensile properties of fabrics and made-up textile articles Determination of maximum force to seam rupture using the strip method
    BS EN ISO 22000:2005 Food safety management systems. Requirements for any organization in the food chain
    EN 14276-1:2006+A1:2011 Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General requirements
    UNE-EN ISO/IEC 17025:2017 General requirements for the competence of testing and calibration laboratories (ISO/IEC 17025:2017)
    UNE-EN ISO 14937:2010 Sterilization of health care products - General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices (ISO 14937:2009)
    BS EN 14276-1 : 2006 PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS
    UNE-EN ISO 7971-2:2010 Cereals - Determination of bulk density, called mass per hectolitre - Part 2: Method of traceability for measuring instruments through reference to the international standard instrument (ISO 7971-2:2009)
    ISO 14160:2011 Sterilization of health care products Liquid chemical sterilizing agents for single-use medical devices utilizing animal tissues and their derivatives Requirements for characterization, development, validation and routine control of a sterilization process for medical devices
    UNE-EN 295-2:2013 Vitrified clay pipe systems for drains and sewers - Part 2: Evaluation of conformity and sampling
    ISO 9001:2015 Quality management systems — Requirements
    UNE-EN ISO 13935-1:2014 Textiles - Seam tensile properties of fabrics and made-up textile articles - Part 1: Determination of maximum force to seam rupture using the strip method (ISO 13935-1:2014)
    BS EN 14704-3:2006 Determination of the elasticity of fabrics Narrow fabrics
    ISO 22476-5:2012 Geotechnical investigation and testing — Field testing — Part 5: Flexible dilatometer test
    BS EN ISO 13934-1:2013 Textiles. Tensile properties of fabrics Determination of maximum force and elongation at maximum force using the strip method
    ISO 11137-3:2017 Sterilization of health care products — Radiation — Part 3: Guidance on dosimetric aspects of development, validation and routine control
    ISO 22476-12:2009 Geotechnical investigation and testing Field testing Part 12: Mechanical cone penetration test (CPTM)
    BS EN ISO 13936-1:2004 Textiles. Determination of the slippage resistance of yarns at a seam in woven fabrics Fixed seam opening method
    ISO 17034:2016 General requirements for the competence of reference material producers
    BS EN ISO 15883-1 : 2009 WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS (ISO 15883-1:2006)
    ISO 9073-18:2007 Textiles — Test methods for nonwovens — Part 18: Determination of breaking strength and elongation of nonwoven materials using the grab tensile test
    ISO 9073-15:2007 Textiles Test methods for nonwovens Part 15: Determination of air permeability
    BS EN ISO 13485:2016 Medical devices. Quality management systems. Requirements for regulatory purposes
    EN 14704-3:2006 Determination of the elasticity of fabrics - Part 3: Narrow fabrics
    EN 16602-20-07:2016 Space product assurance - Quality and safety assurance for space test centres
    EN ISO 13935-1:2014 Textiles - Seam tensile properties of fabrics and made-up textile articles - Part 1: Determination of maximum force to seam rupture using the strip method (ISO 13935-1:2014)
    EN 16421:2014 Influence of materials on water for human consumption - Enhancement of microbial growth (EMG)
    EN ISO 9073-15:2008 Textiles - Test methods for nonwovens - Part 15: Determination of air permeability (ISO 9073-15:2007)
    EN 15424:2007 Sterilization of medical devices - Low temperature steam and formaldehyde - Requirements for development, validation and routine control of a sterilization process for medical devices
    EN ISO 11135-1:2007 Sterilization of health care products - Ethylene oxide - Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices (ISO 11135-1:2007)
    EN 14343:2005/AC:2008 ROTARY POSITIVE DISPLACEMENT PUMPS - PERFORMANCE TESTS FOR ACCEPTANCE
    IPC J STD 004 : B REQUIREMENTS FOR SOLDERING FLUXES
    EN 14704-2:2007 Determination of the elasticity of fabrics - Part 2: Multiaxial tests
    EN ISO 19901-8:2015 Petroleum and natural gas industries - Specific requirements for offshore structures - Part 8: Marine soil investigations (ISO 19901-8:2014)
    EN 1776:2015 Gas infrastructure - Gas measuring systems - Functional requirements
    EN ISO 22476-5:2012 Geotechnical investigation and testing - Field testing - Part 5: Flexible dilatometer test (ISO 22476-5:2012)
    EN ISO 25424:2011 Sterilization of medical devices - Low temperature steam and formaldehyde - Requirements for development, validation and routine control of a sterilization process for medical devices (ISO 25424:2009)
    EN ISO 17034:2016 General requirements for the competence of reference material producers (ISO 17034:2016)
    EN ISO 13936-2 : 2004 TEXTILES - DETERMINATION OF THE SLIPPAGE RESISTANCE OF YARNS AT A SEAM IN WOVEN FABRICS - PART 2: FIXED LOAD METHOD (ISO 13936-2:2004)
    EN ISO 9073-16:2008 Textiles - Test methods for nonwovens - Part 16: Determination of resistance to penetration by water (hydrostatic pressure) (ISO 9073-16:2007)
    EN ISO 11137-3:2017 Sterilization of health care products - Radiation - Part 3: Guidance on dosimetric aspects of development, validation and routine control (ISO 11137-3:2017)
    EN ISO 22476-7:2012 Geotechnical investigation and testing - Field testing - Part 7: Borehole jack test (ISO 22476-7:2012)
    EN ISO 25178-70 : 2014 GEOMETRICAL PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE: AREAL - PART 70: MATERIAL MEASURES (ISO 25178-70:2014)
    EN 9137:2012 Quality management systems - Guidance for the Application of AQAP 2110 within an EN 9100 Quality Management System
    EN ISO 20857:2013 Sterilization of health care products - Dry heat - Requirements for the development, validation and routine control of a sterilization process for medical devices (ISO 20857:2010)
    EN ISO 22000:2005 Food safety management systems - Requirements for any organization in the food chain (ISO 22000:2005)
    EN ISO 13936-1 : 2004 TEXTILES - DETERMINATION OF THE SLIPPAGE RESISTANCE OF YARNS AT A SEAM IN WOVEN FABRICS - PART 1: FIXED SEAM OPENING METHOD (ISO 13936-1:2004)
    EN ISO 13934-1:2013 Textiles - Tensile properties of fabrics - Part 1: Determination of maximum force and elongation at maximum force using the strip method (ISO 13934-1:2013)
    EN 14704-1:2005 Determination of the elasticity of fabrics - Part 1: Strip tests
    EN ISO 9073-18:2008 Textiles - Test methods for nonwovens - Part 18: Determination of breaking strength and elongation of nonwoven materials using the grab tensile test (ISO 9073-18:2007)
    EN ISO 17662:2016 Welding - Calibration, verification and validation of equipment used for welding, including ancillary activities (ISO 17662:2016)
    EN 295-2:2013 Vitrified clay pipe systems for drains and sewers - Part 2: Evaluation of conformity and sampling
    EN 16653:2015 Rubber or plastics-coated fabrics - Determination of stitch tear resistance (using a needle) - Test method
    EN ISO 17665-1 : 2006 Sterilization of health care products - Moist heat - Part 1: Requirements for the development, validation and routine control of a sterilization process for medical devices (ISO 17665-1:2006)
    EN 4650:2010 Aerospace series - Wire and cable marking process, UV Laser
    EI 1581 : 2016 SPECIFICATIONS AND LABORATORY QUALIFICATION PROCEDURES FOR AVIATION FUEL FILTER/WATER SEPARATORS
    EN ISO 13935-2:2014 Textiles - Seam tensile properties of fabrics and made-up textile articles - Part 2: Determination of maximum force to seam rupture using the grab method (ISO 13935-2:2014)
    MIL-PRF-10304 Revision F:1999 METERS, ELECTRICAL INDICATING, PANEL TYPE, RUGGEDIZED, GENERAL SPECIFICATION FOR
    NF ISO 14470 : 2012 FOOD IRRADIATION - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF THE PROCESS OF IRRADIATION USING IONIZING RADIATION FOR THE TREATMENT OF FOOD
    DIN EN 12668-1 E : 2010 NON-DESTRUCTIVE TESTING - CHARACTERIZATION AND VERIFICATION OF ULTRASONIC EXAMINATION EQUIPMENT - PART 1: INSTRUMENTS
    BS EN ISO 22476-1:2012 Geotechnical investigation and testing. Field testing Electrical cone and piezocone penetration test
    MIL-DTL-9129 Revision G:2014 Discharges, Electrostatic General Specification for
    DIN EN ISO 9073-16:2009-01 TEXTILES - TEST METHODS FOR NONWOVENS - PART 16: DETERMINATION OF RESISTANCE TO PENETRATION BY WATER (HYDROSTATIC PRESSURE)
    MIL-PRF-83530 Revision C:2008 RESISTOR, VOLTAGE SENSITIVE (VARISTOR, METAL-OXIDE), GENERAL SPECIFICATION FOR
    BS EN ISO 20857:2013 Sterilization of health care products. Dry heat. Requirements for the development, validation and routine control of a sterilization process for medical devices
    ISO/TS 16949:2009 Quality management systems Particular requirements for the application of ISO 9001:2008 for automotive production and relevant service part organizations
    UNI ISO 7870-1 : 2014 CONTROL CHARTS - PART 1: GENERAL GUIDELINES
    ANSI/AAMI/ISO 14937:2009(R2013) STERILIZATION OF HEALTH CARE PRODUCTS - GENERAL REQUIREMENTS FOR CHARACTERIZATION OF A STERILIZING AGENT AND THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES
    MIL-DTL-23928 Revision G:2014 PANELS, ELECTRICAL, POWER DISTRIBUTION AND MANUAL TRANSFER, CIRCUIT BREAKER TYPE
    PREN ISO 11135 : DRAFT 2011 STERILIZATION OF HEALTH-CARE PRODUCTS - ETHYLENE OXIDE - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES (ISO/DIS 11135:2011)
    BS EN ISO 17034:2016 General requirements for the competence of reference material producers
    ANSI/MSE 2000 : 2008 A MANAGEMENT SYSTEM FOR ENERGY
    DIN EN 16653:2015-05 RUBBER OR PLASTICS-COATED FABRICS - DETERMINATION OF STITCH TEAR RESISTANCE (USING A NEEDLE) - TEST METHOD
    I.S. EN ISO 22476-7:2012 GEOTECHNICAL INVESTIGATION AND TESTING - FIELD TESTING - PART 7: BOREHOLE JACK TEST (ISO 22476-7:2012)
    MIL-DTL-25547 Revision C:2002 LOUDSPEAKER, PERMANENT MAGNET LS-211/AIC-13
    CAN/CSA-ISO 13485:16 Medical devices - Quality management systems - Requirements for regulatory purposes (Adopted ISO 13485:2016, third edition, 2016-03-01)
    I.S. CEN TS 15358:2006 SOLID RECOVERED FUELS - QUALITY MANAGEMENT SYSTEMS - PARTICULAR REQUIREMENTS FOR THEIR APPLICATION TO THE PRODUCTION OF SOLID RECOVERED FUELS
    MIL-PRF-83287 Revision G:2007 INDICATORS, FAULT LOCATING, GENERAL SPECIFICATION FOR
    18/30358588 DC : 0 BS EN ISO 29001 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - SECTOR-SPECIFIC QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS FOR PRODUCT AND SERVICE SUPPLY ORGANIZATIONS
    MIL-PRF-83536 Revision F:2017 RELAYS, ELECTROMAGNETIC, ESTABLISHED RELIABILITY, 25 AMPERES AND BELOW, GENERAL SPECIFICATION FOR
    03/315684 DC : DRAFT SEP 2003 ISO 10019 - GUIDELINES FOR THE SELECTION OF QUALITY MANAGEMENT SYSTEM CONSULTANTS AND USE OF THEIR SERVICES
    AAMI TIR56 : 2013 GUIDANCE FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF AN ETHYLENE OXIDE STERILIZATION PROCESS UTILIZING FLEXIBLE BAG SYSTEMS FOR THE STERILIZATION OF MEDICAL DEVICES
    15/30329382 DC : 0 BS EN 9120 - QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS FOR AVIATION, SPACE AND DEFENSE DISTRIBUTORS
    16/30343033 DC : 0 BS ISO/IEC 17021-3 - CONFORMITY ASSESSMENT - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF MANAGEMENT SYSTEMS - PART 3: COMPETENCE REQUIREMENTS FOR AUDITING AND CERTIFICATION OF QUALITY MANAGEMENT SYSTEMS
    06/30148429 DC : DRAFT JULY 2006 ISO 9073-17 - TEXTILES - TEST METHODS FOR NONWOVENS - PART 17: EVALUATION OF WATER PENETRATION (SPRAY IMPACT TEST)
    MIL-DTL-5757 Revision N:2017 RELAYS, ELECTROMAGNETIC, GENERAL SPECIFICATION FOR
    DIN EN 15224:2016-04 (Draft) QUALITY MANAGEMENT SYSTEMS - EN ISO 9001:2015 FOR HEALTHCARE
    14/30296140 DC : 0 BS EN 62047-25 - SEMICONDUCTOR DEVICES - MICRO-ELECTROMECHANICAL DEVICES - PART 25: SILICON-BASED MEMS FABRICATION TECHNOLOGY - MEASUREMENT METHOD OF PULL-PRESS AND SHEARING STRENGTH OF MICRO BONDING AREA
    PD CEN ISO/TR 14969:2005 Medical devices. Quality management systems. Guidance on the application of ISO 13485:2003
    MIL R 19365 : E RESISTOR, ADJUSTABLE, WIREWOUND, POWER
    MIL-PRF-22684 Revision F:2006 RESISTOR, FIXED, FILM (INSULATED) GENERAL SPECIFICATION FOR
    UNE-CEN/CLC ISO/IEC/TS 17021-3:2016 Conformity assessment - Requirements for bodies providing audit and certification of management systems - Part 3: Competence requirements for auditing and certification of quality management systems (ISO/IEC/TS 17021-3:2013)
    BIS IS/ISO 13936-2 : 2004 TEXTILES - DETERMINATION OF THE SLIPPAGE RESISTANCE OF YARNS AT A SEAM IN WOVEN FABRICS - PART 2: FIXED LOAD METHOD
    BS PD ISO/IEC TS 17021-3 : 2013 CONFORMITY ASSESSMENT - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF MANAGEMENT SYSTEMS - PART 3: COMPETENCE REQUIREMENTS FOR AUDITING AND CERTIFICATION OF QUALITY MANAGEMENT SYSTEMS
    MIL-PRF-49137 Revision E:2014 Capacitor, Fixed, Electrolytic (Solid Electrolyte), Tantalum, Molded, Conformal Coated and Metal Cased with Plastic End-Fill, Nonhermetically Sealed, General Specification for
    ISO/ASTM 52628:2013 Standard practice for dosimetry in radiation processing
    BS EN ISO 22476-12:2009 Geotechnical investigation and testing. Field testing Mechanical cone penetration test (CPTM)
    MIL-PRF-39010 Revision E:1997 Coil, Radio Frequency, Fixed, Molded, Established Reliability and Nonestablished Reliability, General Specification for
    03/102285 DC : DRAFT SEP 2003 BS ISO 21247 - QUALITY PLANS FOR PRODUCT ACCEPTANCE - COMBINED ACCEPT-ZERO AND CONTROL PROCEDURES
    MIL R 93 : F RESISTORS, FIXED, WIRE-WOUND (ACCURATE), GENERAL SPECIFICATION FOR
    04/30079743 DC : DRAFT APR 2004 ISO 15378 - PRIMARY PACKAGING MATERIALS FOR MEDICINAL PRODUCTS - PARTICULAR REQUIREMENTS FOR THE APPLICATION OF ISO 9001:2000 WITH REFERENCE TO GOOD MANUFACTURING PRACTICE (GMP)
    CSA ISO/TR 10017:2003 GUIDANCE ON STATISTICAL TECHNIQUES FOR ISO 9001:2000
    CSA ISO 10005 : 2005 : R2010 QUALITY MANAGEMENT SYSTEMS - GUIDELINES FOR QUALITY PLANS
    16/30344611 DC : 0 BS ISO 7870-1 - CONTROL CHARTS - PART 1: GENERAL GUIDELINES
    CSA ISO TR 14969 : 2005 : R2010 MEDICAL DEVICES - QUALITY MANAGEMENT SYSTEMS - GUIDANCE ON THE APPLICATION OF ISO 13485:2003
    BS ISO 21247:2005 Combined accept-zero sampling systems and process control procedures for product acceptance
    CEI EN 62047-25 : 1ED 2017 SEMICONDUCTOR DEVICES - MICRO-ELECTROMECHANICAL DEVICES - PART 25: SILICON BASED MEMS FABRICATION TECHNOLOGY - MEASUREMENT METHOD OF PULL-PRESS AND SHEARING STRENGTH OF MICRO BONDING AREA
    CSA ISO 10005 : 2005 : R2015 QUALITY MANAGEMENT SYSTEMS - GUIDELINES FOR QUALITY PLANS
    UNE-EN 15224:2017 Quality management systems - EN ISO 9001:2015 for healthcare
    I.S. EN 60861:2008 EQUIPMENT FOR MONITORING OF RADIONUCLIDES IN LIQUID EFFLUENTS AND SURFACE WATERS
    I.S. EN 61744:2006 CALIBRATION OF FIBRE OPTIC CHROMATIC DISPERSION TEST SETS
    SAE AS 5502 : 2016 STANDARD REQUIREMENTS FOR AEROSPACE SEALANTS AND ADHESION PROMOTERS
    EN ISO 11135:2014 Sterilization of health-care products - Ethylene oxide - Requirements for the development, validation and routine control of a sterilization process for medical devices (ISO 11135:2014)
    MIL-DTL-3432 Revision J:2009 CABLES, (POWER AND SPECIAL PURPOSE) AND WIRE, ELECTRICAL (300 AND 600 VOLTS)
    AQAP 2110 : 2016 NATO QUALITY ASSURANCE REQUIREMENTS FOR DESIGN, DEVELOPMENT AND PRODUCTION
    UNI EN ISO 22476-12 : 2009 GEOTECHNICAL INVESTIGATION AND TESTING - FIELD TESTING - PART 12: MECHANICAL CONE PENETRATION TEST (CPTM)
    MIL-DTL-38159 Revision D:2015 CONNECTORS, ELECTRIC, RAMP POWER, 416/240 VOLTS
    UNI EN ISO 9073-5 : 2009 TEXTILES - TEST METHODS FOR NONWOVENS - PART 5: DETERMINATION OF RESISTANCE TO MECHANICAL PENETRATION (BALL BURST PROCEDURE)
    MIL-S-4040 Revision G:2012 Solenoid, Electrical General Specification for (No S/S Document)
    MIL-DTL-83505 Revision C:2017 SOCKETS, (LEAD, ELECTRONIC COMPONENTS) GENERAL SPECIFICATION FOR
    MIL-PRF-1 Revision N:2011 ELECTRON TUBES - GENERAL SPECIFICATION FOR
    UNE-EN ISO 15378:2016 Primary packaging materials for medicinal products - Particular requirements for the application of ISO 9001:2008, with reference to Good Manufacturing Practice (GMP) (ISO 15378:2015)
    MIL-PRF-15160 Revision L:2018 Fuses, Instrument, Power, and Telephone General Specification for
    ISO/TR 10017:2003 Guidance on statistical techniques for ISO 9001:2000
    DIN EN ISO 9073-15 E : 2008 TEXTILES - TEST METHODS FOR NONWOVENS - PART 15: DETERMINATION OF AIR PERMEABILITY
    DIN EN 16421:2015-05 INFLUENCE OF MATERIALS ON WATER FOR HUMAN CONSUMPTION - ENHANCEMENT OF MICROBIAL GROWTH (EMG)
    CSA ISO 9004 : 2009 : R2015 MANAGING FOR THE SUSTAINED SUCCESS OF AN ORGANIZATION - A QUALITY MANAGEMENT APPROACH
    CSA ISO 10005 : 2005 : R2010 : FR QUALITY MANAGEMENT SYSTEMS - GUIDELINES FOR QUALITY PLANS
    IEEE 1528-2013 REDLINE IEEE Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques
    SAE AS 83519 : 2015 SHIELD TERMINATION, SOLDER STYLE, INSULATED, HEAT-SHRINKABLE, ENVIRONMENT RESISTANT GENERAL SPECIFICATION FOR
    ISO/ASTM 51956:2013 Practice for use of a thermoluminescence-dosimetry system (TLD system) for radiation processing
    DIN EN ISO 9004:2009-12 MANAGING FOR THE SUSTAINED SUCCESS OF AN ORGANIZATION - A QUALITY MANAGEMENT APPROACH
    ANSI/AAMI/ISO 11137-3:2017 STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 3: GUIDANCE ON DOSIMETRIC ASPECTS OF DEVELOPMENT, VALIDATION AND ROUTINE CONTROL
    UNI EN 16421 : 2015 INFLUENCE OF MATERIALS ON WATER FOR HUMAN CONSUMPTION - ENHANCEMENT OF MICROBIAL GROWTH (EMG)
    PREN 14276-1 : DRAFT 2017 PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS
    UNI EN ISO 9073-15 : 2008 TEXTILES - TEST METHODS FOR NONWOVENS - PART 15: DETERMINATION OF AIR PERMEABILITY
    DIN EN ISO 11737-1:2009-09 STERILIZATION OF MEDICAL DEVICES - MICROBIOLOGICAL METHODS - PART 1: DETERMINATION OF A POPULATION OF MICROORGANISMS ON PRODUCTS
    UNE 179002:2018 Health services. Quality management system for health care transport organization.
    I.S. ISO 10019:2005 GUIDELINES FOR THE SELECTION OF QUALITY MANAGEMENT SYSTEM CONSULTANTS AND USE OF THEIR SERVICES
    I.S. EN 16653:2015 RUBBER OR PLASTICS-COATED FABRICS - DETERMINATION OF STITCH TEAR RESISTANCE (USING A NEEDLE) - TEST METHOD
    I.S. EN ISO 9004:2009 QUALITY MANAGEMENT - QUALITY OF AN ORGANIZATION - GUIDANCE TO ACHIEVE SUSTAINED SUCCESS (ISO 9004:2018)
    IEEE/ANSI C63.23-2012 American National Standard Guide for Electromagnetic Compatibility—Computations and Treatment of Measurement Uncertainty
    S.R. CEN/CLC/ISO/IEC/TS 17021-3:2016 CONFORMITY ASSESSMENT - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF MANAGEMENT SYSTEMS - PART 3: COMPETENCE REQUIREMENTS FOR AUDITING AND CERTIFICATION OF QUALITY MANAGEMENT SYSTEMS (ISO/IEC/TS 17021-3:2013)
    AAMI ISO 14160 : 2011 STERILIZATION OF HEALTH CARE PRODUCTS - LIQUID CHEMICAL STERILIZING AGENTS FOR SINGLE-USE MEDICAL DEVICES UTILIZING ANIMAL TISSUES AND THEIR DERIVATIVES - REQUIREMENTS FOR CHARACTERIZATION, DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES
    S.R. ISO/TS 9002:2016 QUALITY MANAGEMENT SYSTEMS - GUIDELINES FOR THE APPLICATION OF ISO 9001:2015
    I.S. EN 4650:2010 AEROSPACE SERIES - WIRE AND CABLE MARKING PROCESS, UV LASER
    NF EN 9137 : 2012 QUALITY MANAGEMENT SYSTEMS - GUIDANCE FOR THE APPLICATION OF AQAP 2110 WITHIN AN EN 9100 QUALITY MANAGEMENT SYSTEM
    ONORM EN ISO 11737-1 : 2011 STERILIZATION OF MEDICAL DEVICES - MICROBIOLOGICAL METHODS - PART 1: DETERMINATION OF A POPULATION OF MICROORGANISMS ON PRODUCTS
    UNI EN ISO 11737-1 : 2006 STERILIZATION OF MEDICAL DEVICES - MICROBIOLOGICAL METHODS - PART 1: DETERMINATION OF A POPULATION OF MICROORGANISMS ON PRODUCTS
    ISO 28594:2017 Combined accept-zero sampling systems and process control procedures for product acceptance
    AQAP 2310 : 2017 NATO QUALITY ASSURANCE REQUIREMENTS FOR AVIATION, SPACE AND DEFENCE SUPPLIERS
    S.R. CEN ISO TS 29001:2011 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - SECTOR-SPECIFIC QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS FOR PRODUCT AND SERVICE SUPPLY ORGANIZATIONS
    UNI EN ISO 7971-2 : 2009 CEREALS - DETERMINATION OF BULK DENSITY, CALLED MASS PER HECTOLITRE - PART 2: METHOD OF TRACEABILITY FOR MEASURING INSTRUMENTS THROUGH REFERENCE TO THE INTERNATIONAL STANDARD INSTRUMENT
    BS EN ISO 15589-1:2017 Petroleum, petrochemical and natural gas industries. Cathodic protection of pipeline systems On-land pipelines
    ONORM EN ISO 11135 : 2015 STERILIZATION OF HEALTH-CARE PRODUCTS - ETHYLENE OXIDE - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES (ISO 11135:2014)
    UNI EN 9137 : 2012 QUALITY MANAGEMENT SYSTEMS - GUIDANCE FOR THE APPLICATION OF AQAP 2110 WITHIN AN EN 9100 QUALITY MANAGEMENT SYSTEM
    UNE-EN 9137:2012 Quality management systems - Guidance for the Application of AQAP 2110 within an EN 9100 Quality Management System
    UNE-EN ISO 25424:2011 Sterilization of medical devices - Low temperature steam and formaldehyde - Requirements for development, validation and routine control of a sterilization process for medical devices (ISO 25424:2009)
    DIN EN 14726 E : 2005 ALUMINIUM AND ALUMINIUM ALLOYS - CHEMICAL ANALYSIS - GUIDELINE FOR SPARK OPTICAL EMISSION SPECTROMETRIC ANALYSIS
    ASTM F 3278 : 2017 Standard Performance Specification for Hand-Held Metal Detectors Used in Safety and Security
    NF EN ISO 14160 : 2011 STERILIZATION OF HEALTH CARE PRODUCTS - LIQUID CHEMICAL STERILIZING AGENTS FOR SINGLE-USE MEDICAL DEVICES UTILIZING ANIMAL TISSUES AND THEIR DERIVATIVES - REQUIREMENTS FOR CHARACTERIZATION, DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES
    IWA 2:2007 Quality management systems Guidelines for the application of ISO 9001:2000 in education
    ISO 11135:2014 Sterilization of health-care products Ethylene oxide Requirements for the development, validation and routine control of a sterilization process for medical devices
    DIN EN ISO 9001:2015-11 QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS (ISO 9001:2015)
    DIN EN ISO 15883-1:2014-10 WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS (ISO 15883-1:2006 + AMD 1:2014)
    DIN EN ISO 11737-2:2010-04 STERILIZATION OF MEDICAL DEVICES - MICROBIOLOGICAL METHODS - PART 2: TESTS OF STERILITY PERFORMED IN THE DEFINITION, VALIDATION AND MAINTENANCE OF A STERILIZATION PROCESS
    DIN EN 14704-3 E : 2007 DETERMINATION OF THE ELASTICITY OF FABRICS - PART 3: NARROW FABRICS
    UNE-EN ISO 11737-2:2010 Sterilization of medical devices - Microbiological methods - Part 2: Tests of sterility performed in the definition, validation and maintenance of a sterilization process (ISO 11737-2:2009)
    BS EN ISO 11137-3:2017 Sterilization of health care products. Radiation Guidance on dosimetric aspects of development, validation and routine control
    ISO 17662:2016 Welding — Calibration, verification and validation of equipment used for welding, including ancillary activities
    ISO 22476-7:2012 Geotechnical investigation and testing — Field testing — Part 7: Borehole jack test
    BS EN ISO 17662:2016 Welding. Calibration, verification and validation of equipment used for welding, including ancillary activities
    BS EN ISO 9001:2015 Quality management systems. Requirements
    BS EN ISO 9000:2015 Quality management systems. Fundamentals and vocabulary
    BS EN ISO 11135-1:2007 Sterilization of health care products. Ethylene oxide Requirements for development, validation and routine control of a sterilization process for medical devices
    IEC 62209-2:2010 Human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices - Human models, instrumentation, and procedures - Part 2: Procedure to determine the specific absorption rate (SAR) for wireless communication devices used in close proximity to the human body (frequency range of 30 MHz to 6 GHz)
    CEN/TS 15358:2006 Solid recovered fuels - Quality management systems - Particular requirements for their application to the production of solid recovered fuels
    EN ISO 15883-1:2009/A1:2014 WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS (ISO 15883-1:2006/AMD 1:2014)
    EN 61744:2005 Calibration of fibre optic chromatic dispersion test sets
    DIN EN 14704-3:2007-03 DETERMINATION OF THE ELASTICITY OF FABRICS - PART 3: NARROW FABRICS
    DIN EN 14726:2005-12 ALUMINIUM AND ALUMINIUM ALLOYS - CHEMICAL ANALYSIS - GUIDELINE FOR SPARK OPTICAL EMISSION SPECTROMETRIC ANALYSIS
    DIN EN 14704-1:2005-07 DETERMINATION OF THE ELASTICITY OF FABRICS - PART 1: STRIP TESTS
    EN 12697-38:2004 Bituminous mixtures - Test methods for hot mix asphalt - Part 38: Common equipment and calibration
    DIN EN ISO 13935-2:1999-04 TEXTILES - SEAM TENSILE PROPERTIES OF FABRICS AND MADE-UP TEXTILE ARTICLES - PART 2: DETERMINATION OF MAXIMUM FORCE TO SEAM RUPTURE USING THE GRAB METHOD (ISO 13935-2:2014)
    DIN EN ISO 14937:2010-03 Sterilization of health care products - General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices (ISO 14937:2009)
    DIN EN ISO 13936-2:2004-07 Textiles - Determination of the slippage resistance of yarns at a seam in woven fabrics - Part 2: Fixed load method (ISO 13936-2:2004)
    EN 60861:2008 Equipment for monitoring of radionuclides in liquid effluents and surface waters
    DIN EN ISO 13935-1:1999-04 TEXTILES - SEAM TENSILE PROPERTIES OF FABRICS AND MADE-UP TEXTILE ARTICLES - PART 1: DETERMINATION OF MAXIMUM FORCE TO SEAM RUPTURE USING THE STRIP METHOD (ISO 13935-1:2014)
    DIN EN 16001:2009-08 ENERGY MANAGEMENT SYSTEMS - REQUIREMENTS WITH GUIDANCE FOR USE
    EN 62209-2:2010 HUMAN EXPOSURE TO RADIO FREQUENCY FIELDS FROM HAND-HELD AND BODYMOUNTED WIRELESS COMMUNICATION DEVICES - HUMAN MODELS, INSTRUMENTATION, AND PROCEDURES - PART 2: PROCEDURE TO DETERMINE THE SPECIFIC ABSORPTION RATE (SAR) FOR WIRELESS COMMUNICATION DEVICES USED IN CLOSE PROXIMITY TO THE HUMAN BODY (FREQUENCY RANGE OF 30 MHZ TO 6 GHZ)
    EN 60469:2013 Transitions, pulses and related waveforms - Terms, definitions and algorithms
    ONORM EN ISO 9073-18 : 2008 TEXTILES - TEST METHODS FOR NONWOVENS - PART 18: DETERMINATION OF BREAKING STRENGTH AND ELONGATION OF NONWOVEN MATERIALS USING THE GRAB TENSILE TEST
    JEDEC JESD557D:2023 Statistical Process Control Systems
    UNE-EN 14276-1:2007 Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General requirements

    Standards Referencing This Book - (Show below) - (Hide below)

    ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories
    ISO 5725-1:1994 Accuracy (trueness and precision) of measurement methods and results — Part 1: General principles and definitions
    ISO 19011:2011 Guidelines for auditing management systems
    ISO/TR 10017:2003 Guidance on statistical techniques for ISO 9001:2000
    ISO 5725-3:1994 Accuracy (trueness and precision) of measurement methods and results — Part 3: Intermediate measures of the precision of a standard measurement method
    ISO 5725-6:1994 Accuracy (trueness and precision) of measurement methods and results — Part 6: Use in practice of accuracy values
    ISO 5725-4:1994 Accuracy (trueness and precision) of measurement methods and results Part 4: Basic methods for the determination of the trueness of a standard measurement method
    ISO/IEC Guide 99:2007 International vocabulary of metrology Basic and general concepts and associated terms (VIM)
    ISO 3534-2:2006 Statistics Vocabulary and symbols Part 2: Applied statistics
    ISO/TR 13425:2006 Guidelines for the selection of statistical methods in standardization and specification
    ISO 9004:2009 Managing for the sustained success of an organization A quality management approach
    ISO 14001:2015 Environmental management systems — Requirements with guidance for use
    ISO 5725-2:1994 Accuracy (trueness and precision) of measurement methods and results Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method
    ISO 9001:2015 Quality management systems — Requirements
    ISO 9000:2015 Quality management systems — Fundamentals and vocabulary
    SA HB 13485:2020 AS ISO 13485:2017 - Medical devices - A practical guide
    ISO 5725-5:1998 Accuracy (trueness and precision) of measurement methods and results — Part 5: Alternative methods for the determination of the precision of a standard measurement method
    EN ISO 9000:2015 Quality management systems - Fundamentals and vocabulary (ISO 9000:2015)
    OIML D 10 : 2007 GUIDELINES FOR THE DETERMINATION OF CALIBRATION INTERVALS OF MEASURING INSTRUMENTS
    ISO/IEC Guide 98-3:2008 Uncertainty of measurement — Part 3: Guide to the expression of uncertainty in measurement (GUM:1995)
    ISO 3534-1:2006 Statistics — Vocabulary and symbols — Part 1: General statistical terms and terms used in probability
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective