ISO 10576-1:2003
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
Statistical methods — Guidelines for the evaluation of conformity with specified requirements — Part 1: General principles
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Withdrawn date
05-08-2022
Superseded by
Language(s)
English, French
Published date
10-03-2003
Important note : Users cannot be edited or removed once added to your Multi user PDF.
ISO 10576-1:2002 sets out guidelines for drafting requirements that may be formulated as limiting values for a quantifiable characteristic and for checking conformity to such requirements when the test or measurement result is subject to uncertainty.
It is applicable whenever the uncertainty may be quantified according to the principles laid down in the Guide to the expression of uncertainty in measurement. The term uncertainty is thus a descriptor for all elements of variation in the measurement result, including uncertainty due to sampling.
It is outside the scope of ISO 10576-1:2002 to give rules for how to act when an inconclusive result of a conformity test has been obtained.
| DevelopmentNote |
Supersedes ISO/DIS 10576-1 (03/2003) Also numbered as BIS IS 16179-1. (02/2015)
|
| DocumentType |
Standard
|
| Pages |
15
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy |
| Standards | Relationship |
| NEN ISO 10576-1 : 2003 | Identical |
| SS-ISO 10576-1 :2005 | Identical |
| GOST R ISO 10576-1 : 2006 ERRATA 2011 | Identical |
| DIN ISO 10576-1:2009-10 | Identical |
| PN ISO 10576-1 : 2006 | Identical |
| BS ISO 21748:2017 | Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty evaluation |
| OIML G 1-106 : 2012 | EVALUATION OF MEASUREMENT DATA - THE ROLE OF MEASUREMENT UNCERTAINTY IN CONFORMITY ASSESSMENT |
| BS ISO 3951-2:2013 | Sampling procedures for inspection by variables General specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection of independent quality characteristics |
| CEI UNI EN ISO/IEC 17067 : 2013 | CONFORMITY ASSESSMENT - FUNDAMENTALS OF PRODUCT CERTIFICATION AND GUIDELINES FOR PRODUCT CERTIFICATION SCHEMES |
| BS ISO 3951-1:2013 | Sampling procedures for inspection by variables Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL |
| UNE-EN ISO 14644-9:2014 | Cleanrooms and associated controlled environments - Part 9: Classification of surface cleanliness by particle concentration (ISO 14644-9:2012) |
| BS EN ISO/IEC 17067:2013 | Conformity assessment. Fundamentals of product certification and guidelines for product certification schemes |
| BS 6002-2:2007 | Sampling procedures for inspection by variables General guide to single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection of independent quality characteristics |
| 12/30247200 DC : 0 | BS ISO 3951-1 - SAMPLING PROCEDURES FOR INSPECTION BY VARIABLES - PART 1: SPECIFICATION FOR SINGLE SAMPLING PLANS INDEXED BY ACCEPTANCE QUALITY LIMIT (AQL) FOR LOT-BY-LOT INSPECTION FOR A SINGLE QUALITY CHARACTERISTIC AND A SINGLE AQL |
| ISO 5667-20:2008 | Water quality Sampling Part 20: Guidance on the use of sampling data for decision making Compliance with thresholds and classification systems |
| ISO 21748:2017 | Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty evaluation |
| I.S. EN ISO/IEC 17067:2013 | CONFORMITY ASSESSMENT - FUNDAMENTALS OF PRODUCT CERTIFICATION AND GUIDELINES FOR PRODUCT CERTIFICATION SCHEMES (ISO/IEC 17067:2013 (EQV)) |
| ISO/IEC Guide 98-1:2009 | Uncertainty of measurement — Part 1: Introduction to the expression of uncertainty in measurement |
| SAE AS 9138 : 2018 | AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS STATISTICAL PRODUCT ACCEPTANCE REQUIREMENTS |
| ASTM C 1128 : 2018 : REDLINE | Standard Guide for Preparation of Working Reference Materials for Use in Analysis of Nuclear Fuel Cycle Materials |
| CEN/TR 15592:2007 | Health services - Quality management systems - Guide for the use of EN ISO 9004:2000 in health services for performance improvement |
| BS ISO 26367-2:2017 | Guidelines for assessing the adverse environmental impact of fire effluents Methodology for compiling data on environmentally significant emissions from fires |
| ISO/TR 18532:2009 | Guidance on the application of statistical methods to quality and to industrial standardization |
| 12/30259670 DC : 0 | BS ISO/IEC GUIDE 98-4.2 - UNCERTAINTY OF MEASUREMENT - PART 4: ROLE OF MEASUREMENT UNCERTAINTY IN CONFORMITY ASSESSMENT |
| 12/30236911 DC : 0 | BS EN ISO/IEC 17067 - CONFORMITY ASSESSMENT - FUNDAMENTALS OF PRODUCT CERTIFICATION AND GUIDELINES FOR PRODUCT CERTIFICATION SCHEMES |
| ISO 26367-2:2017 | Guidelines for assessing the adverse environmental impact of fire effluents — Part 2: Methodology for compiling data on environmentally significant emissions from fires |
| UNI ISO/TR 18532 : 2010 | Guide to the application of statistical methods for quality and standardization in the industrial sector |
| BS 6002-1:2007 | Sampling procedures for inspection by variables Guide to single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL |
| BS EN ISO 14644-9:2012 | Cleanrooms and associated controlled environments Classification of surface cleanliness by particle concentration |
| 08/30190157 DC : DRAFT SEP 2008 | BS EN ISO 14644-9 - CLEANROOMS AND ASSOCIATED CONTROLLED ENVIRONMENTS - PART 9: CLASSIFICATION OF SURFACE PARTICLE CLEANLINESS |
| PD CEN/TR 15592:2007 | Health services. Quality management systems. Guide for the use of EN ISO 9004:2000 in health services for performance improvement |
| S.R. CEN TR 15592:2007 | HEALTH SERVICES - QUALITY MANAGEMENT SYSTEMS - GUIDE FOR THE USE OF EN ISO 9004:2000 IN HEALTH SERVICES FOR PERFORMANCE IMPROVEMENT |
| PREN 9138 : 200P1 | AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS - STATISTICAL PRODUCT ACCEPTANCE REQUIREMENTS |
| UNE-EN ISO/IEC 17067:2014 | Conformity assessment - Fundamentals of product certification and guidelines for product certification schemes (ISO/IEC 17067:2013) |
| I.S. EN ISO 14644-9:2012 | CLEANROOMS AND ASSOCIATED CONTROLLED ENVIRONMENTS - PART 9: CLASSIFICATION OF SURFACE CLEANLINESS BY PARTICLE CONCENTRATION (ISO 14644-9:2012) |
| UNI/TS 11326-2 : 2015 | ACOUSTICS - EVALUATION OF THE UNCERTAINTY OF MEASUREMENTS AND CALCULATIONS IN ACOUSTICS - PART 2: COMPLIANCE WITH SPECIFICATIONS |
| UNI ISO 3951-2 : 2014 | SAMPLING PROCEDURES FOR INSPECTION BY VARIABLES - PART 2: GENERAL SPECIFICATION FOR SINGLE SAMPLING PLANS INDEXED BY ACCEPTANCE QUALITY LIMIT (AQL) FOR LOT-BY-LOT INSPECTION OF INDEPENDENT QUALITY CHARACTERISTICS |
| ISO/IEC Guide 98-4:2012 | Uncertainty of measurement Part 4: Role of measurement uncertainty in conformity assessment |
| DIN EN ISO 14644-9:2012-12 | Cleanrooms and associated controlled environments - Part 9: Classification of surface cleanliness by particle concentration (ISO 14644-9:2012) |
| OIML G 1-104 : 2009 | EVALUATION OF MEASUREMENT DATA - AN INTRODUCTION TO THE "GUIDE TO THE EXPRESSION OF UNCERTAINTY IN MEASUREMENT" AND RELATED DOCUMENTS |
| BS ISO 5667-20:2008 | Water quality. Sampling Guidance on the use of sampling data for decision making. Compliance with thresholds and classification systems |
| ISO/IEC TR 17028:2017 | Conformity assessment Guidelines and examples of a certification scheme for services |
| 04/30119227 DC : DRAFT SEP 2004 | BS ISO 6002-2 - SAMPLING PROCEDURES FOR INSPECTION BY VARIABLES - PART 2: GENERAL SPECIFICATION FOR SINGLE SAMPLING PLANS INDEXED BY ACCEPTANCE QUALITY LIMIT (AQL) FOR LOT-BY-LOT INSPECTION OF INDEPENDENT QUALITY CHARACTERISTICS |
| 15/30330450 DC : 0 | BS EN 9138 - AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS - STATISTICAL PRODUCT ACCEPTANCE REQUIREMENTS |
| ISO 3951-2:2013 | Sampling procedures for inspection by variables — Part 2: General specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection of independent quality characteristics |
| UNI EN ISO 14644-9 : 2012 | CLEANROOMS AND ASSOCIATED CONTROLLED ENVIRONMENTS - PART 9: CLASSIFICATION OF SURFACE CLEANLINESS BY PARTICLE CONCENTRATION |
| IWA 1:2005 | Quality management systems Guidelines for process improvements in health service organizations |
| ISO 14644-9:2012 | Cleanrooms and associated controlled environments Part 9: Classification of surface cleanliness by particle concentration |
| UNE-ISO 3951-2:2012 | Sampling procedures for inspection by variables -- Part 2: General specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection of independent quality characteristics |
| EN ISO 14644-9:2012 | Cleanrooms and associated controlled environments - Part 9: Classification of surface cleanliness by particle concentration (ISO 14644-9:2012) |
| EN ISO/IEC 17067:2013 | Conformity assessment - Fundamentals of product certification and guidelines for product certification schemes (ISO/IEC 17067:2013) |
| 12/30245656 DC : 0 | ISO/DIS 3951-2 - SAMPLING PROCEDURES FOR INSPECTION BY VARIABLES - PART 2: GENERAL SPECIFICATION FOR SINGLE SAMPLING PLANS INDEXED BY ACCEPTANCE QUALITY LIMIT (AQL) FOR LOT-BY-LOT INSPECTION OF INDEPENDENT QUALITY CHARACTERISTICS |
| UNI ISO 3951-1 : 2014 | SAMPLING PROCEDURES FOR INSPECTION BY VARIABLES - PART 1: SPECIFICATION FOR SINGLE SAMPLING PLANS INDEXED BY ACCEPTANCE QUALITY LIMIT (AQL) FOR LOT-BY-LOT INSPECTION FOR A SINGLE QUALITY CHARACTERISTIC AND A SINGLE AQL |
| PD ISO/IEC TR 17028:2017 | Conformity assessment. Guidelines and examples of a certification scheme for services |
| UNI CEI EN ISO/IEC 17067 : 2013 | CONFORMITY ASSESSMENT - FUNDAMENTALS OF PRODUCT CERTIFICATION AND GUIDELINES FOR PRODUCT CERTIFICATION SCHEMES |
| ISO 3951-1:2013 | Sampling procedures for inspection by variables — Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL |
| ISO 5725-1:1994 | Accuracy (trueness and precision) of measurement methods and results — Part 1: General principles and definitions |
| ISO/TS 14253-2:1999 | Geometrical Product Specifications (GPS) Inspection by measurement of workpieces and measuring equipment Part 2: Guide to the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification |
| ISO 2854:1976 | Statistical interpretation of data — Techniques of estimation and tests relating to means and variances |
| ISO 5725-3:1994 | Accuracy (trueness and precision) of measurement methods and results — Part 3: Intermediate measures of the precision of a standard measurement method |
| ISO 5725-6:1994 | Accuracy (trueness and precision) of measurement methods and results — Part 6: Use in practice of accuracy values |
| ISO 5725-4:1994 | Accuracy (trueness and precision) of measurement methods and results Part 4: Basic methods for the determination of the trueness of a standard measurement method |
| ISO 2602:1980 | Statistical interpretation of test results Estimation of the mean Confidence interval |
| ISO 3534-2:2006 | Statistics — Vocabulary and symbols — Part 2: Applied statistics |
| ISO 5725-2:1994 | Accuracy (trueness and precision) of measurement methods and results Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method |
| ISO 9000:2015 | Quality management systems — Fundamentals and vocabulary |
| ISO 5725-5:1998 | Accuracy (trueness and precision) of measurement methods and results — Part 5: Alternative methods for the determination of the precision of a standard measurement method |
| ISO 3534-1:2006 | Statistics — Vocabulary and symbols — Part 1: General statistical terms and terms used in probability |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.