ISO 11124-4:1993
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
Preparation of steel substrates before application of paints and related products Specifications for metallic blast-cleaning abrasives Part 4: Low-carbon cast-steel shot
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
28-09-2018
English, French
02-12-1993
Specifies requirements for 12 grades of low-carbon cast-steel shot abrasive: designation, sampling, package identification and lot traceability, information to be supplied by the manufacturer or supplier, hardness, density, defect/structural requirements and chemical composition. The requirements specified apply to abrasives supplied in the "new" condition only.
DevelopmentNote |
DRAFT ISO/DIS 11124-4 is also available for this standard. (08/2017)
|
DocumentType |
Standard
|
Pages |
6
|
PublisherName |
International Organization for Standardization
|
Status |
Withdrawn
|
SupersededBy |
Standards | Relationship |
BS 7079-E4(1994) : 1994 AMD 9723 | Identical |
I.S. EN ISO 11124-4:1998 | Identical |
BS EN ISO 11124-4:1997 | Identical |
SN EN ISO 11124-4 : 1998 | Identical |
UNE-EN ISO 11124-4:1997 | Identical |
NF EN ISO 11124-4 : 1997 | Identical |
EN ISO 11124-4:1997 | Identical |
NFT 35 505-4 : 1994 FD | Identical |
DIN EN ISO 11124-4:1997-10 | Identical |
NBN EN ISO 11124-4 : 1997 | Identical |
NEN EN ISO 11124-4 : 1997 | Identical |
UNI EN ISO 11124-4 : 1999 | Identical |
NS EN ISO 11124-4 : 1ED 1997 | Identical |
ONORM EN ISO 11124-4 : 1997 | Identical |
PN EN ISO 11124-4 : 2000 | Identical |
PNE-prEN ISO 11124-4 | Identical |
ISO 12944-4:2017 | Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 4: Types of surface and surface preparation |
DIN EN 13507:2016-07 (Draft) | THERMAL SPRAYING - PRE-TREATMENT OF SURFACES OF METALLIC PARTS AND COMPONENTS FOR THERMAL SPRAYING |
EN 13507:2010 | Thermal spraying - Pre-treatment of surfaces of metallic parts and components for thermal spraying |
BS EN ISO 11126-1:1997 | Preparation of steel substrates before application of paints and related products. Specifications for non-metallic blast-cleaning abrasives General introduction and classification |
ONORM B 3430-1 : 2014 | PLANNING AND EXECUTION OF PAINTING AND COATING WORK - PART 1: COATING ON WOOD AND WOODEN MATERIALS, METAL, PLASTIC, MASONRY, PLASTER, CONCRETE AND LIGHTWEIGHT BUILDING BOARDS |
BS 3900-A3(2004) : 2004 | PAINTS AND VARNISHES - STANDARD PANELS FOR TESTING |
BS EN 13507:2010 | Thermal spraying. Pre-treatment of surfaces of metallic parts and components for thermal spraying |
BS 7079-F1(1997) : 1997 | PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - NON-METALLIC BLAST CLEANING ABRASIVES - GENERAL INTRODUCTION AND CLASSIFICATION |
BS 7079-D2(2000) : 2000 AMD 13361 | PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - GROUP D: METHODS FOR SURFACE PREPARATION - PART D2: ABRASIVE BLAST CLEANING |
I.S. EN 13507:2010 | THERMAL SPRAYING - PRE-TREATMENT OF SURFACES OF METALLIC PARTS AND COMPONENTS FOR THERMAL SPRAYING |
UNI EN 13507 : 2010 | THERMAL SPRAYING - PRE-TREATMENT OF SURFACES OF METALLIC PARTS AND COMPONENTS FOR THERMAL SPRAYING |
I.S. EN ISO 11124-3:1998 | PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - SPECIFICATIONS FOR METALLIC BLAST-CLEANING ABRASIVES - PART 3: HIGH-CARBON CAST-STEEL SHOT AND GRIT |
UNE-EN 13507:2011 | Thermal spraying - Pre-treatment of surfaces of metallic parts and components for thermal spraying |
EN ISO 11124-3:1997 | Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 3: High-carbon cast-steel shot and grit (ISO 11124-3:1993) |
EN ISO 12944-4:2017 | Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 4: Types of surface and surface preparation (ISO 12944-4:2017) |
I.S. EN ISO 12944-4:2017 | PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 4: TYPES OF SURFACE AND SURFACE PREPARATION (ISO 12944-4:2017) |
BS EN ISO 8504-2:2001 | Preparation of steel substrates before application of paints and related products. Surface preparation methods Abrasive blast cleaning |
BS EN ISO 12944-4:2017 | Paints and varnishes. Corrosion protection of steel structures by protective paint systems Types of surface and surface preparation |
ISO 11125-4:1993 | Preparation of steel substrates before application of paints and related products Test methods for metallic blast-cleaning abrasives Part 4: Determination of apparent density |
ISO 11125-3:1993 | Preparation of steel substrates before application of paints and related products Test methods for metallic blast-cleaning abrasives Part 3: Determination of hardness |
DIN 8201-1:1985-07 | ABRASIVES; CLASSIFICATION, DESIGNATION |
DIN 8201-2:1985-07 | METALLIC CAST ABRASIVES - GRAIN SHAPE: GLOBULAR |
ISO 11125-6:1993 | Preparation of steel substrates before application of paints and related products Test methods for metallic blast-cleaning abrasives Part 6: Determination of foreign matter |
ISO 629:1982 | Steel and cast iron — Determination of manganese content — Spectrophotometric method |
ISO 4935:1989 | Steel and iron — Determination of sulfur content — Infrared absorption method after combustion in an induction furnace |
SAE J827_201310 | HIGH-CARBON CAST-STEEL-SHOT |
ISO 439:1994 | Steel and iron Determination of total silicon content Gravimetric method |
DIN 8201-3:1985-07 | METALLIC CAST ABRASIVES, GRAIN SHAPE, EDGED |
DIN 8201-4:1985-07 | ABRASIVES - STEEL WIRE SHOT |
SAE J 441 : 2013 | Cut Wire Shot |
ISO 11125-1:1993 | Preparation of steel substrates before application of paints and related products Test methods for metallic blast-cleaning abrasives Part 1: Sampling |
ISO 10714:1992 | Steel and iron — Determination of phosphorus content — Phosphovanadomolybdate spectrophotometric method |
ISO 11125-5:1993 | Preparation of steel substrates before application of paints and related products Test methods for metallic blast-cleaning abrasives Part 5: Determination of percentage defective particles and of microstructure |
ISO 9556:1989 | Steel and iron — Determination of total carbon content — Infrared absorption method after combustion in an induction furnace |
ISO 11125-7:1993 | Preparation of steel substrates before application of paints and related products Test methods for metallic blast-cleaning abrasives Part 7: Determination of moisture |
SAE J444_201209 | CAST SHOT AND GRIT SIZE SPECIFICATIONS FOR PEENING AND CLEANING |
ISO 11125-2:1993 | Preparation of steel substrates before application of paints and related products Test methods for metallic blast-cleaning abrasives Part 2: Determination of particle size distribution |
BS 2451:1963 | Specification for chilled iron shot and grit |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.