BS 7403-12:2000
|
Full-flow lubricating oil filters for internal combustion engines Filtration efficiency using particle counting, and contaminant retention capacity |
DD ISO/TS 11365:2011
|
Petroleum and related products. Guidance for the maintenance and use of triaryl phosphate ester turbine-control fluids |
MIL-DTL-83133 Revision J:2015
|
TURBINE FUEL, AVIATION, KEROSENE TYPE, JP-8 (NATO F-34), NATO F-35, AND JP-8+100 (NATO F-37) |
BS EN 60970:2007
|
Insulating liquids. Methods for counting and sizing particles |
MIL-DTL-8815-31 Base Document:2009
|
FILTER ELEMENTS, NON-CLEANABLE, FLUID PRESSURE, HYDRAULIC LINE, 3,000 PSI, 5 MICRON ABSOLUTE, -65 DEGREES F TO 275 DEGREES F |
05/30098238 DC : 0
|
ISO 21081-2 - HYDRAULIC FLUID POWER - MONITORING THE LEVEL OF PARTICULATE CONTAMINATION OF THE FLUID - PART 2: FILTER BLOCKAGE TECHNIQUE |
01/120731 DC : DRAFT FEB 2001
|
BS ISO 13323-3 - DETERMINATION OF PARTICLE SIZE DISTRIBUTION - SINGLE PARTICLE LIGHT INTERACTION METHODS - PART 3: SINGLE-PARTICLE LIGHT-EXTINCTION DEVICE DESIGN, PERFORMANCE SPECIFICATIONS AND OPERATION REQUIREMENTS |
BS ISO 16431:2012
|
Hydraulic fluid power. System clean-up procedures and verification of cleanliness of assembled systems |
07/19969755 DC : 0
|
BS ISO 11500 - HYDRAULIC FLUID POWER - DETERMINATION OF PARTICULATE CONTAMINATION LEVEL OF A LIQUID SAMPLE BY AUTOMATIC PARTICLE COUNTING USING THE LIGHT EXTINCTION PRINCIPLE |
BS ISO 14085-3:2015
|
Aerospace series. Hydraulic filter elements. Test methods Filtration efficiency and retention capacity |
BS ISO 19438:2003
|
Diesel fuel and petrol filters for internal combustion engines. Filtration efficiency using particle counting and contaminant retention capacity |
05/30129166 DC : DRAFT OCT 2005
|
BS ISO 281 - ROLLING BEARINGS - DYNAMIC LOAD RATINGS AND RATING LIFE |
BS ISO 281:2007
|
Rolling bearings. Dynamic load ratings and rating life |
EI 1570 : 2012
|
HANDBOOK ON ELECTRONIC SENSORS FOR THE DETECTION OF PARTICULATE MATTER AND/OR FREE WATER DURING AIRCRAFT REFUELLING |
BS ISO 4406:2017
|
Hydraulic fluid power. Fluids. Method for coding the level of contamination by solid particles |
ISO 28521:2009
|
Ships and marine technology — Hydraulic oil systems — Guidance for grades of cleanliness and flushing |
I.S. EN 61221:2004
|
PETROLEUM PRODUCTS AND LUBRICANTS - TRIARYL PHOSPHATE ESTER TURBINE CONTROL FLUIDS (CATEGORY ISO-L-TCD) - SPECIFICATIONS |
ISO 21018-3:2008
|
Hydraulic fluid power — Monitoring the level of particulate contamination of the fluid — Part 3: Use of the filter blockage technique |
SAE J 1985 : 2013
|
FUEL FILTERS - INITIAL SINGLE-PASS EFFICIENCY TEST METHOD |
ISO 4548-12:2017
|
Methods of test for full-flow lubricating oil filters for internal combustion engines — Part 12: Filtration efficiency using particle counting and contaminant retention capacity |
ASTM D 8072 : 2017
|
Standard Classification for Reporting Solids and Insoluble Water Contamination of Hydrocarbon-Based Petroleum Products When Analyzed by Imaging Instrumentation |
ISO 16889:2008
|
Hydraulic fluid power Filters Multi-pass method for evaluating filtration performance of a filter element |
SAE ARP 1953 : 2014
|
ACCEPTANCE TEST PROCEDURES AND STANDARDS TO ENSURE CLEAN FUEL SYSTEM COMPONENTS |
MIL-DTL-83133 Revision K:2018
|
TURBINE FUEL, AVIATION, KEROSENE TYPE, JP-8 (NATO F-34), NATO F-35, AND JP-8+100 (NATO F-37) |
PD ISO/TR 15640:2011
|
Hydraulic fluid power contamination control. General principles and guidelines for selection and application of hydraulic filters |
MIL-STD-419 Revision E:2010
|
CLEANING, PROTECTING, AND TESTING PIPING, TUBING, AND FITTINGS FOR HYDRAULIC POWER TRANSMISSION EQUIPMENT |
05/30098184 DC : DRAFT MAY 2005
|
ISO 8068 - LUBRICANTS, INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L) - FAMILY T (TURBINES) - SPECIFICATIONS FOR LUBRICATING OILS FOR TURBINES |
ASTM D 6786 : 2015 : REDLINE
|
Standard Test Method for Particle Count in Mineral Insulating Oil Using Automatic Optical Particle Counters |
ISO/TS 13353:2002
|
Diesel fuel and petrol filters for internal combustion engines Initial efficiency by particule counting |
08/30168621 DC : DRAFT JAN 2008
|
BS ISO 28521 - SHIPS AND MARINE TECHNOLOGY - HYDRAULIC OIL SYSTEMS - GUIDANCE FOR GRADES OF CLEANLINESS AND FLUSHING |
16/30266482 DC : 0
|
BS ISO 12669 - HYDRAULIC FLUID POWER - METHOD FOR DETERMINING THE REQUIRED CLEANLINESS LEVEL (RCL) FOR A SYSTEM |
MIL-DTL-25524 Revision F:2015
|
TURBINE FUEL, AVIATION, THERMALLY STABLE (JPTS) |
05/30138884 DC : DRAFT SEP 2005
|
|
BS EN 61221:2004
|
Petroleum products and lubricants. Triaryl phosphate ester turbine control fluids (category ISO-L-TCD). Specifications |
MIL-DTL-8815-32 Base Document:2010
|
FILTER ELEMENTS, NON-CLEANABLE, FLUID PRESSURE, HYDRAULIC LINE, 3000 PSI, 5 MICRON ABSOLUTE, -65 DEGREES F TO 275 DEGREES F, H-60 AIRCRAFT |
DIN ISO 281:2010-10
|
Rolling bearings - Dynamic load ratings and rating life (ISO 281:2007) |
PD ISO/TR 1281-2:2008
|
Rolling bearings. Explanatory notes on ISO 281 Modified rating life calculation, based on a systems approach to fatigue stresses |
14/30273508 DC : 0
|
BS ISO 21018-4 - HYDRAULIC FLUID POWER - MONITORING THE LEVEL OF PARTICULATE CONTAMINATION IN THE FLUID - PART 4: USE OF THE LIGHT EXTINCTION TECHNIQUE |
ASTM D 8166 : 2017
|
Standard Test Method for Sizing and Counting Particulates in Light and Middle Distillate Fuels and Biodiesel Blend (B6 to B20) Using Continuous Flow and Bottle Sampler Automatic Particle Counters |
ISO 16431:2012
|
Hydraulic fluid power — System clean-up procedures and verification of cleanliness of assembled systems |
NFE 48 695 : 2003
|
HYDRAULIC FLUID POWER - PARTS AND COMPONENTS - EXPRESSION OF PARTICULATE POLLUTION MEASUREMENT RESULTS |
ISO 14085-3:2015
|
Aerospace series Hydraulic filter elements Test methods Part 3: Filtration efficiency and retention capacity |
BS ISO 16889 : 2008
|
HYDRAULIC FLUID POWER - FILTERS - MULTI-PASS METHOD FOR EVALUATING FILTRATION PERFORMANCE OF A FILTER ELEMENT |
ASTM D 7684 : 2011
|
Standard Guide for Microscopic Characterization of Particles from In-Service Lubricants |
NF ISO 21018-1 : 2008
|
HYDRAULIC FLUID POWER - MONITORING THE LEVEL OF PARTICULATE CONTAMINATION OF THE FLUID - PART 1: GENERAL PRINCIPLES |
ISO 9940:2015
|
Aerospace series Fluid, hydraulic, phosphate ester-base, fire resistant Technical specification |
ASTM D 7416 : 2009 : R2015
|
Standard Practice for Analysis of In-Service Lubricants Using a Particular Five-Part (Dielectric Permittivity, Time-Resolved Dielectric Permittivity with Switching Magnetic Fields, Laser Particle Counter, Microscopic Debris Analysis, and Orbital Viscometer) Integrated Tester |
DIN ISO 281 Beiblatt 5:2011-10
|
ROLLING BEARINGS - DYNAMIC LOAD RATINGS AND RATING LIFE |
BS ISO 21018-1:2008
|
Hydraulic fluid power. Monitoring the level of particulate contamination of the fluid General principles |
BS ISO 23309:2007
|
Hydraulic fluid power systems. Assembled systems. Methods of cleaning lines by flushing |
ISO 16232-9:2007
|
Road vehicles Cleanliness of components of fluid circuits Part 9: Particle sizing and counting by automatic light extinction particle counter |
BS ISO 10050:2005
|
Lubricants, industrial oils and related products (class L). Family T (Turbines). Specifications of triaryl phosphate ester turbine control fluids (category ISO-L-TCD) |
15/30284298 DC : 0
|
BS ISO 12103-1 - ROAD VEHICLES - TEST CONTAMINANTS FOR FILTER EVALUATION - PART 1: ARIZONA TEST DUST |
PD ISO/TS 18409:2018
|
Hydraulic fluid power. Hose and hose assemblies. Method of collecting a fluid sample for analyzing the cleanliness of a hose or hose assembly |
08/30168618 DC : DRAFT JAN 2008
|
BS ISO 28523 - SHIPS AND MARINE TECHNOLOGY - SAMPLING FROM LUBRICATING OIL AND HYDRAULIC OIL SYSTEMS - GUIDANCE FOR SAMPLING FOR DETERMINATION OF CLEANLINESS AND SOLID PARTICLE CONTAMINATION |
BS ISO 12103-1:2016
|
Road vehicles. Test contaminants for filter evaluation Arizona test dust |
PD ISO/TS 16431:2002
|
Hydraulic fluid power. Assembled systems. Verification of cleanliness |
MIL-PRF-87257 Revision C:2017
|
HYDRAULIC FLUID, FIRE RESISTANT, LOW TEMPERATURE, SYNTHETIC HYDROCARBON BASE, AIRCRAFT AND MISSILE |
16/30273511 DC : 0
|
BS ISO 23309 - HYDRAULIC FLUID POWER SYSTEMS - ASSEMBLED SYSTEMS - METHODS OF CLEANING LINES BY FLUSHING |
16/30323482 DC : 0
|
BS ISO 11365 - PETROLEUM AND RELATED PRODUCTS - MAINTENANCE AND USE GUIDE FOR TRIARYL PHOSPHATE ESTER TURBINE CONTROL FLUIDS |
MIL-PRF-87252 Revision D:2015
|
COOLANT FLUID, HYDROLYTICALLY STABLE, DIELECTRIC |
ISO/TR 16386:2014
|
Impact of changes in ISO fluid power particle counting Contamination control and filter test standards |
ASTM D 7619 : 2017 : REDLINE
|
Standard Test Method for Sizing and Counting Particles in Light and Middle Distillate Fuels, by Automatic Particle Counter |
ISO 8068:2006
|
Lubricants, industrial oils and related products (class L) — Family T (Turbines) — Specification for lubricating oils for turbines |
SAE ARP 1827C : 2014
|
MEASURING AIRCRAFT GAS TURBINE ENGINE FINE FUEL FILTER ELEMENT PERFORMANCE |
ISO 11500:2008
|
Hydraulic fluid power — Determination of the particulate contamination level of a liquid sample by automatic particle counting using the light-extinction principle |
ASTM D 7417 : 2017 : REDLINE
|
Standard Test Method for Analysis of In-Service Lubricants Using Particular Four-Part Integrated Tester (Atomic Emission Spectroscopy, Infrared Spectroscopy, Viscosity, and Laser Particle Counter) |
ISO/TR 16144:2002
|
Hydraulic fluid power Calibration of liquid automatic particle counters Procedures used to certify the standard reference material SRM 2806 |
BS ISO 18413:2015
|
Hydraulic fluid power. Cleanliness of components. Inspection document and principles related to contaminant extraction and analysis, and data reporting |
ISO 19438:2003
|
Diesel fuel and petrol filters for internal combustion engines — Filtration efficiency using particle counting and contaminant retention capacity |
SAE J 1227 : 2013
|
ASSESSING CLEANLINESS OF HYDRAULIC FLUID POWER COMPONENTS AND SYSTEMS |
ASTM D 7647 : 2010
|
Standard Test Method for Automatic Particle Counting of Lubricating and Hydraulic Fluids Using Dilution Techniques to Eliminate the Contribution of Water and Interfering Soft Particles by Light Extinction |
NF ISO 16232-9 : 2011
|
ROAD VEHICLES - CLEANLINESS OF COMPONENTS OF FLUID CIRCUITS - PART 9: PARTICLE SIZING AND COUNTING BY AUTOMATIC LIGHT EXTINCTION PARTICLE COUNTER |
ISO 21018-4:2016
|
Hydraulic fluid power Monitoring the level of particulate contamination in the fluid Part 4: Use of the light extinction technique |
ISO/TS 11365:2011
|
Petroleum and related products Guidance for the maintenance and use of triaryl phosphate ester turbine-control fluids |
ISO 12584:2013
|
Aerospace Hydraulic fluid components Expression of particulate contamination levels |
ISO 18436-5:2012
|
Condition monitoring and diagnostics of machines — Requirements for qualification and assessment of personnel — Part 5: Lubricant laboratory technician/analyst |
I.S. EN 60970:2007/AC:2008
|
INSULATING LIQUIDS - METHODS FOR COUNTING AND SIZING PARTICLES |
ISO 12103-1:2016
|
Road vehicles — Test contaminants for filter evaluation — Part 1: Arizona test dust |
ASTM D 6813 : 2002 : REV A : R2007
|
Standard Guide for Performance Evaluation of Hydraulic Fluids for Piston Pumps |
ASTM D 6813 : 2002
|
Standard Guide for Performance Evaluation of Hydraulic Fluids for Piston Pumps |
ASTM D 6813 : 2002 : REV A : R2013
|
Standard Guide for Performance Evaluation of Hydraulic Fluids for Piston Pumps (Withdrawn 2015) |
ASTM D 6813 : 2002 : REV A
|
Standard Guide for Performance Evaluation of Hydraulic Fluids for Piston Pumps |
SAE ARP 5941 : 2014
|
AEROSPACE FLUID POWER - CONTAMINATION SENSITIVITY - CONSIDERATIONS FOR ESTABLISHING TEST PROCEDURES FOR FLIGHT CONTROL ACTUATORS |
SAE AS 4059F : 2013
|
AEROSPACE FLUID POWER - CONTAMINATION CLASSIFICATION FOR HYDRAULIC FLUIDS |
ISO 21018-1:2008
|
Hydraulic fluid power Monitoring the level of particulate contamination of the fluid Part 1: General principles |
BS ISO 9940:2015
|
Aerospace series. Fluid, hydraulic, phosphate ester-base, fire resistant. Technical specification |
11/30187639 DC : 0
|
BS ISO 12584 - AEROSPACE - HYDRAULIC FLUID COMPONENTS - EXPRESSION OF PARTICULATE CONTAMINATION LEVELS |
NF ISO 21018-3 : 2008
|
HYDRAULIC FLUID POWER - MONITORING THE LEVEL OF PARTICULATE CONTAMINATION OF THE FLUID - PART 3: USE OF THE FILTER BLOCKAGE TECHNIQUE |
DIN ISO 281 Beiblatt 3:2009-07
|
ROLLING BEARINGS - DYNAMIC LOAD RATINGS AND RATING LIFE - SUPPLEMENT 3: ESTIMATING OF THE CONTAMINATION FACTOR RESPECTIVELY THE CONTAMINATION LEVEL FOR ROLLING BEARINGS IN CLOSED INDUSTRIAL GEAR UNITS |
NF ISO 11500 : 2008
|
HYDRAULIC FLUID POWER - DETERMINATION OF THE PARTICULATE CONTAMINATION LEVEL OF A LIQUID SAMPLE BY AUTOMATIC PARTICLE COUNTING USING THE LIGHT-EXTINCTION PRINCIPLE |
BS ISO 8068:2006
|
Lubricants, industrial oils and related products (class L). Family T (turbines). Specification for lubricating oils for turbines |
13/30271035 DC : 0
|
BS ISO 14085-3 - AEROSPACE SERIES - HYDRAULIC FILTER ELEMENTS - TEST METHODS - PART 3: FILTRATION EFFICIENCY AND RETENTION CAPACITY |
BS ISO 21018-3:2008
|
Hydraulic fluid power. Monitoring the level of particulate contamination of the fluid Use of the filter blockage technique |
05/30098235 DC : 0
|
ISO 21081-1 - HYDRAULIC FLUID POWER - MONITORING THE LEVEL OF PARTICULATE CONTAMINATION OF THE FLUID - PART 1: GENERAL PRINCIPLES |
DD ISO/TR 16144:2002
|
Hydraulic fluid power. Calibration of liquid automatic particle counters. Procedures used to certify the standard reference material SRM 2806 |
17/30360001 DC : 0
|
BS ISO 21018-4 - HYDRAULIC FLUID POWER - MONITORING THE LEVEL OF PARTICULATE CONTAMINATION IN THE FLUID - PART 4: USE OF THE LIGHT EXTINCTION TECHNIQUE |
14/30302298 DC : 0
|
BS ISO 9940 - AEROSPACE SERIES - FLUID, HYDRAULIC, PHOSPHATE ESTER-BASE, FIRE RESISTANT - TECHNICAL SPECIFICATION |
BS ISO 11500:2008
|
Hydraulic fluid power. Determination of the particulate contamination level of a liquid sample by automatic particle counting using the light-extinction principle |
BS ISO 18436-5:2012
|
Condition monitoring and diagnostics of machines. Requirements for qualification and assessment of personnel Lubricant laboratory technician/analyst |
00/704296 DC : DRAFT FEB 2000
|
ISO/CD 16431 - HYDRAULIC FLUID POWER - ASSEMBLED SYSTEMS - METHOD FOR ACHIEVING ROLL-OFF CLEANLINESS |
BS ISO 12584:2013
|
Aerospace. Hydraulic fluid components. Expression of particulate contamination levels |
SAE ARP 5454 : 2014
|
MULTI-PASS METHOD FOR EVALUATING FILTRATION PERFORMANCE OF FINE LUBE FILTER ELEMENTS UTILIZED IN AEROSPACE POWER AND PROPULSION LUBRICATION SYSTEMS |
16/30316730 DC : 0
|
BS ISO 4548-12 - METHODS OF TEST FOR FULL-FLOW LUBRICATING OIL FILTERS FOR INTERNAL COMBUSTION ENGINES - PART 12: FILTRATION EFFICIENCY USING PARTICLE COUNTING, AND CONTAMINANT RETENTION CAPACITY |
BS ISO 16232-9:2007
|
Road vehicles. Cleanliness of components of fluid circuits Particle sizing and counting by automatic light extinction particle counter |
ISO 11943:1999
|
Hydraulic fluid power On-line automatic particle-counting systems for liquids Methods of calibration and validation |
ASTM D 7416 : 2009
|
Standard Practice for Analysis of In-Service Lubricants Using a Particular Five-Part (Dielectric Permittivity, Time-Resolved Dielectric Permittivity with Switching Magnetic Fields, Laser Particle Counter, Microscopic Debris Analysis, and Orbital Viscome |
MIL-PRF-5606 Revision H:2002
|
HYDRAULIC FLUID, PETROLEUM BASE; AIRCRAFT, MISSILE, AND ORDNANCE |
IEEE C57.152-2013
|
IEEE Guide for Diagnostic Field Testing of Fluid-Filled Power Transformers, Regulators, and Reactors |
SAE AIR 1666 : 2014
|
PERFORMANCE TESTING OF LUBRICANT FILTER ELEMENTS UTILIZED IN AIRCRAFT POWER AND PROPULSION LUBRICATION SYSTEMS |
ISO 11365:2017
|
Petroleum and related products — Requirements and guidance for the maintenance of triaryl phosphate ester turbine control fluids |
NF ISO 16889 : 2008
|
HYDRAULIC FLUID POWER - FILTERS - MULTI-PASS METHOD FOR EVALUATING FILTRATION PERFORMANCE OF A FILTER ELEMENT |
ASTM D 7684 : 2011 : R2016
|
Standard Guide for Microscopic Characterization of Particles from In-Service Lubricants |
SAE J 2312 : 2013
|
AUTOMATIC TRANSMISSION INTAKE FILTER TEST PROCEDURE |
ISO/TS 11366:2011
|
Petroleum and related products — Guidance for in-servicing of lubricating oils for steam, gas and combined-cycle turbines |
ISO 10050:2005
|
Lubricants, industrial oils and related products (class L) — Family T (Turbines) — Specifications of triaryl phosphate ester turbine control fluids (category ISO-L-TCD) |
ISO/TR 15640:2011
|
Hydraulic fluid power contamination control General principles and guidelines for selection and application of hydraulic filters |
ISO 28523:2009
|
Ships and marine technology — Lubricating and hydraulic oil systems — Guidance for sampling to determine cleanliness and particle contamination |
I.S. CWA 15375:2005
|
SEPARATORS FOR MARINE RESIDUAL FUEL - PERFORMANCE TESTING USING SPECIFIC TEST OIL |
ASTM D 6973 : 2014 : REDLINE
|
Standard Test Method for Indicating Wear Characteristics of Petroleum Hydraulic Fluids in a High Pressure Constant Volume Vane Pump |
IEC 60970:2007
|
Insulating liquids - Methods for counting and sizing particles |
BS ISO/TR 16386:1999
|
Impact of changes in ISO fluid power particle counting. Contamination control and filter test standards |
IEC 61221:2004
|
Petroleum products and lubricants - Triaryl phosphate ester turbine control fluids (category ISO-L-TCD) - Specifications |
08/30187368 DC : DRAFT JULY 2008
|
BS ISO 11365 - PETROLEUM AND RELATED PRODUCTS - MAINTENANCE AND USE GUIDE FOR TRIARYL PHOSPHATE ESTER TURBINE CONTROL FLUIDS |
08/30187364 DC : DRAFT JULY 2008
|
BS ISO 11366 - PETROLEUM AND RELATED PRODUCTS - GUIDANCE FOR IN-SERVICE MONITORING OF LUBRICATING OILS FOR STEAM, GAS AND COMBINED-CYCLE TURBINES |
EN 60970:2007/corrigendum:2008
|
INSULATING LIQUIDS - METHODS FOR COUNTING AND SIZING PARTICLES |
EI 1598 : 2012
|
DESIGN, FUNCTIONAL REQUIREMENTS AND LABORATORY TESTING PROTOCOLS FOR ELECTRONIC SENSORS TO MONITOR FREE WATER AND/OR PARTICULATE MATTER IN AVIATION FUEL |
15/30321906 DC : 0
|
BS ISO 11943 - HYDRAULIC FLUID POWER - ON-LINE AUTOMATIC PARTICLE-COUNTING SYSTEMS FOR LIQUIDS - METHODS OF CALIBRATION AND VALIDATION |
04/30098167 DC : DRAFT APR 2004
|
ISO 16232-9 - ROAD VEHICLES - FLUID CIRCUITS - CLEANLINESS OF COMPONENTS - PART 9: PARTICLE SIZING AND COUNTING BY AUTOMATIC LIGHT EXTINCTION PARTICLE COUNTER |
PD ISO/TR 16386:2014
|
Impact of changes in ISO fluid power particle counting. Contamination control and filter test standards |
ISO/TR 1281-2:2008
|
Rolling bearings Explanatory notes on ISO 281 Part 2: Modified rating life calculation, based on a systems approach to fatigue stresses |
BS ISO 11365:2017
|
Petroleum and related products. Requirements and guidance for the maintenance of triaryl phosphate ester turbine control fluids |
08/30190684 DC : DRAFT OCT 2008
|
BS ISO 18436-5 - CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - REQUIREMENTS FOR QUALIFICATION AND ASSESSMENT OF PERSONNEL - PART 5: LUBRICANT LABORATORY TECHNICIAN/ANALYST |
BS ISO 4548-12:2017
|
Methods of test for full-flow lubricating oil filters for internal combustion engines Filtration efficiency using particle counting and contaminant retention capacity |
09/30176303 DC : 0
|
BS ISO 16431 - HYDRAULIC FLUID POWER - ASSEMBLED SYSTEMS - SYSTEM CLEAN-UP PROCEDURES AND VERIFICATION OF CLEANLINESS |
98/717481 DC : DRAFT DEC 1998
|
ISO/CD 16009 - HYDRAULIC FLUID POWER - FILTER - METHOD FOR DETERMINING FILTRATION PERFORMANCE OF AN OFF-LINE ELEMENT |
05/30098254 DC : DRAFT JUL 2005
|
ISO 23309 - HYDRAULIC FLUID POWER - PIPING SYSTEMS - METHODS FOR CLEANING AND FLUSHING |
ISO/TS 18409:2018
|
Hydraulic fluid power Hose and hose assemblies Method of collecting a fluid sample for analyzing the cleanliness of a hose or hose assembly |
DIN 51515-2:2010-02
|
Lubricants and governor fluids for turbines - Minimum requirements - Part 2: Turbine oils TG for high temperature service |
UNI ISO 4406 : 2013
|
HYDRAULIC FLUID POWER - FLUIDS - METHOD FOR CODING THE LEVEL OF CONTAMINATION BY SOLID PARTICLES |
DIN 51515-1:2010-02
|
Lubricants and governor fluids for turbines - Minimum requirements - Part 1: Turbine oils TD for normal service |
CEI EN 60970 : 2007
|
INSULATING LIQUIDS - METHODS FOR COUNTING AND SIZING PARTICLES |
MIL-DTL-8815-33 Base Document:2011
|
FILTER ELEMENTS, NON-CLEANABLE, FLUID PRESSURE, HYDRAULIC LINE, 3500 PSI, 5 MICRON ABSOLUTE, -65 DEGREES F TO 275 DEGREES F, AVIATION GROUND POWER UNIT (AGPU) |
UNI ISO 18436-5 : 2013
|
CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - REQUIREMENTS FOR QUALIFICATION AND ASSESSMENT OF PERSONNEL - PART 5: LUBRICANT LABORATORY TECHNICIAN/ANALYST |
ISO 281:2007
|
Rolling bearings Dynamic load ratings and rating life |
BS ISO 21018-4:2016
|
Hydraulic fluid power. Monitoring the level of particulate contamination in the fluid Use of the light extinction technique |
ISO 18413:2015
|
Hydraulic fluid power Cleanliness of components Inspection document and principles related to contaminant extraction and analysis, and data reporting |
SAE J 2333 : 2013
|
SHIP SYSTEMS AND EQUIPMENT - HYDRAULIC SYSTEMS - FILTER SELECTION PARAMETERS |
ISO 23309:2007
|
Hydraulic fluid power systems Assembled systems Methods of cleaning lines by flushing |
DD ISO/TS 11366:2011
|
Petroleum and related products. Guidance for in-servicing of lubricating oils for steam, gas and combined-cycle turbines |
EN 61221:2004
|
Petroleum products and lubricants - Triaryl phosphate ester turbine control fluids (category ISO-L-TCD) - Specifications |