• ISO 11469:2016

    Current The latest, up-to-date edition.

    Plastics — Generic identification and marking of plastics products

    Available format(s):  Hardcopy, PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

    Language(s):  English, French

    Published date:  23-09-2016

    Publisher:  International Organization for Standardization

    Add To Cart

    Abstract - (Show below) - (Hide below)

    ISO 11469:2016 specifies a system of uniform marking of products that have been fabricated from plastics materials. Provision for the process or processes to be used for marking is outside the scope of this International Standard.

    NOTE 1 Precise details of the marking, e.g. the minimum size of the item to be marked, the size of the lettering, the appropriate location of the marking, are subject to agreement between the manufacturer and the user.

    The marking system is intended to help identify plastics products for subsequent decisions concerning handling, waste recovery or disposal.

    Generic identification of the plastics is provided by the symbols and abbreviated terms given in ISO 1043‑1, ISO 1043‑2, ISO 1043‑3 and ISO 1043‑4.

    NOTE 2 If more detailed information for material identification is needed, additional marking of plastics products can be applied as defined in the appropriate product standard.

    ISO 11469:2016 is not intended to supplant, replace or in any way interfere with the requirements for labelling specified in product standards or legislation.

    General Product Information - (Show below) - (Hide below)

    Committee ISO/TC 61/SC 1
    Development Note Supersedes ISO/DIS 11469. (09/2016)
    Document Type Standard
    Publisher International Organization for Standardization
    Status Current
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    ASTM D 1972 : 1997 : R2005 Standard Practice for Generic Marking of Plastic Products (Withdrawn 2014)
    UNE-EN ISO 16396-1:2015 Plastics - Polyamide (PA) moulding and extrusion materials - Part 1: Designation system, marking of products and basis for specifications (ISO 16396-1:2015)
    09/30194273 DC : 0 BS EN 62208 - EMPTY ENCLOSURES FOR LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - GENERAL REQUIREMENTS
    13/30240164 DC : 0 BS ISO 16365-1 - PLASTICS - THERMOPLASTIC POLYURETHANES FOR MOULDING AND EXTRUSION - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS
    ECMA 341 : 4ED 2010 ENVIRONMENTAL DESIGN CONSIDERATIONS FOR ICT & CE PRODUCTS
    UNI CEN/TS 16398 : 2013 PLASTICS - TEMPLATE FOR REPORTING AND COMMUNICATION OF BIOBASED CARBON CONTENT AND RECOVERY OPTIONS OF BIOPOLYMERS AND BIOPLASTICS - DATA SHEET
    PREN 840-2 : DRAFT 2010 MOBILE WASTE CONTAINERS - PART 2: CONTAINERS WITH 4 WHEELS WITH A CAPACITY UP TO 1300 L WITH FLAT LID(S), FOR TRUNNION AND/OR COMB LIFTING DEVICES - DIMENSIONS AND DESIGN
    BS ISO 17422:2002 PLASTICS - ENVIRONMENTAL ASPECTS - GENERAL GUIDELINES FOR THEIR INCLUSION IN STANDARDS
    UL 7006 : 1ED 2017 SUSTAINABILITY STANDARD FOR HOUSEHOLD ROOM AIR CONDITIONING APPLIANCES
    08/30190628 DC : 0 BS ISO 21507 - EARTH-MOVING MACHINERY - PERFORMANCE REQUIREMENTS FOR NONMETALLIC FUEL TANKS
    DIN EN 16848 E : 2017 BIO-BASED PRODUCTS - REQUIREMENTS FOR BUSINESS TO BUSINESS COMMUNICATION OF CHARACTERISTICS USING A DATA SHEET
    DIN EN 15345:2008-02 Plastics - Recycled Plastics - Characterisation of Polypropylene (PP) recyclates
    PREN 840-3 : DRAFT 2010 MOBILE WASTE CONTAINERS - PART 3: CONTAINERS WITH 4 WHEELS WITH A CAPACITY UP TO 1300 L WITH DOME LID(S), FOR TRUNNION AND/OR COMB LIFTING DEVICES - DIMENSIONS AND DESIGN
    12/30240423 DC : 0 BS ISO 16396-1 - PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM, MARKING OF PRODUCTS AND BASIS FOR SPECIFICATIONS
    13/30279399 DC : 0 BS EN 60286-2 - PACKAGING OF COMPONENTS FOR AUTOMATIC HANDLING - PART 2: TAPE PACKAGING OF COMPONENTS WITH UNIDIRECTIONAL LEADS ON CONTINUOUS TAPES
    R7004-17 Sustainability standard for household cooking appliances (Binational standard with AHAM 7004-2017 and UL 7004)
    CSA R7003 : 2016 SUSTAINABILITY STANDARD FOR HOUSEHOLD CLOTHES WASHERS
    SAE J 1344 : 1997(S2017) MARKING OF PLASTIC PARTS
    CSA R7001 : 2014 SUSTAINABILITY STANDARD FOR HOUSEHOLD REFRIGERATION APPLIANCES
    CSA SPE 7005 : 2016 SUSTAINABILITY STANDARD FOR HOUSEHOLD CLOTHES DRYING APPLIANCES
    CSA R7006 : 2018 SUSTAINABILITY STANDARD FOR HOUSEHOLD ROOM AIR CONDITIONING APPLIANCES
    SPE-7002-14 Sustainability standard for household portable and floor care appliances (Bi-national standard, with AHAM 7002-2014 and UL 7002)
    I.S. EN 61076-3-120:2016 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-120: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR REWIRABLE POWER CONNECTORS WITH SNAP LOCKING FOR RATED VOLTAGE OF 250 V D.C. AND RATED CURRENT OF 30 A
    UNE-ISO 21507:2011 Earth-moving machinery -- Performance requirements for non-metallic fuel tanks
    I.S. EN ISO 20029-1:2018 PLASTICS - THERMOPLASTIC POLYESTER/ESTER AND POLYETHER/ESTER ELASTOMERS FOR MOULDING AND EXTRUSION - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATION (ISO 20029-1:2017)
    ISO 16365-1:2014 Plastics Thermoplastic polyurethanes for moulding and extrusion Part 1: Designation system and basis for specifications
    EN ISO 20029-1 : 2018 PLASTICS - THERMOPLASTIC POLYESTER/ESTER AND POLYETHER/ESTER ELASTOMERS FOR MOULDING AND EXTRUSION - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATION (ISO 20029-1:2017)
    I.S. EN 60286-4:2013 PACKAGING OF COMPONENTS FOR AUTOMATIC HANDLING - PART 4: STICK MAGAZINES FOR ELECTRONIC COMPONENTS ENCAPSULATED IN PACKAGES OF DIFFERENT FORMS (IEC 60286-4:2013 (EQV))
    IEC PAS 63015:2016 Definition of "Low-Halogen" for electronic products
    BS EN 15347:2007 Plastics. Recycled Plastics. Characterization of plastics waste
    DIN EN 15342 E : 2008 PLASTICS - RECYCLED PLASTICS - CHARACTERIZATION OF POLYSTYRENE (PS) RECYCLATES
    BS EN 840-4:2012 MOBILE WASTE AND RECYCLING CONTAINERS - PART 4: CONTAINERS WITH 4 WHEELS WITH A CAPACITY UP TO 1700 L WITH FLAT LID(S), FOR WIDE TRUNNION OR BG- AND/OR WIDE COMB LIFTING DEVICES - DIMENSIONS AND DESIGN
    UNE-EN 840-4:2013 Mobile waste and recycling containers - Part 4: Containers with 4 wheels with a capacity up to 1 700 l with flat lid(s), for wide trunnion or BG- and/or wide comb lifting devices - Dimensions and design
    UNE-EN 840-1:2013 Mobile waste and recycling containers - Part 1: Containers with 2 wheels with a capacity up to 400 l for comb lifting devices - Dimensions and design
    EN 175301-801:2006 Detail Specification: High density rectangular connectors, round removable crimp contacts
    UL 7008 : 1ED 2018 SUSTAINABILITY STANDARD FOR HOUSEHOLD DEHUMIDIFIER APPLIANCES
    EN 62208:2011 EMPTY ENCLOSURES FOR LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - GENERAL REQUIREMENTS (IEC 62208:2011)
    EN 60286-2:2015 PACKAGING OF COMPONENTS FOR AUTOMATIC HANDLING - PART 2: PACKAGING OF COMPONENTS WITH UNIDIRECTIONAL LEADS ON CONTINUOUS TAPES (IEC 60286-2:2015)
    EN 60286-4:2013 PACKAGING OF COMPONENTS FOR AUTOMATIC HANDLING - PART 4: STICK MAGAZINES FOR ELECTRONIC COMPONENTS ENCAPSULATED IN PACKAGES OF DIFFERENT FORMS (IEC 60286-4:2013)
    EN 50290-2-20:2016 Communication cables - Part 2-20: Common design rules and construction - General
    CEN/TS 16398 : 2012 PLASTICS - TEMPLATE FOR REPORTING AND COMMUNICATION OF BIO-BASED CARBON CONTENT AND RECOVERY OPTIONS OF BIOPOLYMERS AND BIOPLASTICS - DATA SHEET
    DIN EN 840-3:2013-03 MOBILE WASTE AND RECYCLING CONTAINERS - PART 3: CONTAINERS WITH 4 WHEELS WITH A CAPACITY UP TO 1300 L WITH DOME LID(S), FOR TRUNNION AND/OR COMB LIFTING DEVICES - DIMENSIONS AND DESIGN
    DIN EN 15551:2011-01 RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - BUFFERS
    ISO/IEC 29142-3:2013 Information technology Print cartridge characterization Part 3: Environment
    DIN EN ISO 16396-1 E : 2015 PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM, MARKING OF PRODUCTS AND BASIS FOR SPECIFICATIONS (ISO 16396-1:2015)
    BS EN 62075 : 2012 AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - ENVIRONMENTALLY CONSCIOUS DESIGN
    ISO 28078-1:2009 Plastics Poly(phenylene sulfide) (PPS) moulding and extrusion materials Part 1: Designation system and basis for specifications
    10/30232446 DC : 0 BS EN 840-3 - MOBILE WASTE CONTAINERS - PART 3: CONTAINERS WITH 4 WHEELS WITH A CAPACITY UP TO 1300 L WITH DOME LID(S), FOR TRUNNION AND/OR COMB LIFTING DEVICES - DIMENSIONS AND DESIGN
    BS PD CEN/TS 16398 : 2012 PLASTICS - TEMPLATE FOR REPORTING AND COMMUNICATION OF BIO-BASED CARBON CONTENT AND RECOVERY OPTIONS OF BIOPOLYMERS AND BIOPLASTICS - DATA SHEET
    DIN EN 15551:2013-05 (Draft) RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - BUFFERS
    BS EN 60286-6 : 2004 PACKAGING OF COMPONENTS FOR AUTOMATIC HANDLING - PART 6: BULK CASE PACKAGING FOR SURFACE MOUNTING COMPONENTS
    BS EN 61076-3-118 : 2010 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-118: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR A 4 POLE + PE POWER CONNECTOR WITH PUSH-PULL COUPLING
    ASTM D 1972 : 1997 : R2001 Standard Practice for Generic Marking of Plastic Products
    BS EN 50290-2-20:2016 COMMUNICATION CABLES - PART 2-20: COMMON DESIGN RULES AND CONSTRUCTION - GENERAL
    BS EN 62208:2011 Empty enclosures for low-voltage switchgear and controlgear assemblies. General requirements
    16/30282538 DC : 0 BS ISO 20140-5 - AUTOMATION SYSTEMS AND INTEGRATION - EVALUATING ENERGY EFFICIENCY AND OTHER FACTORS OF MANUFACTURING SYSTEMS THAT INFLUENCE THE ENVIRONMENT - PART 5: ENVIRONMENTAL INFLUENCE EVALUATION DATA
    BS EN 15551:2017 Railway applications. Railway rolling stock. Buffers
    ASTM D 1972 : 1997 Standard Practice for Generic Marking of Plastic Products
    UNI EN 15345 : 2008 PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLYPROPYLENE (PP) RECYCLATES
    IEC TR 62422:2007 Environmental characterization of solid insulating materials
    CEI EN 62208 : 2012 EMPTY ENCLOSURES FOR LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - GENERAL REQUIREMENTS
    EN 60286-1:2017 PACKAGING OF COMPONENTS FOR AUTOMATIC HANDLING - PART 1: TAPE PACKAGING OF COMPONENTS WITH AXIAL LEADS ON CONTINUOUS TAPES (IEC 60286-1:2017)
    AHAM 7002 : 2014 SUSTAINABILITY STANDARD FOR HOUSEHOLD PORTABLE AND FLOOR CARE APPLIANCES
    ECMA 370 : 5ED 2015 TED - THE ECO DECLARATION
    IEC 60286-1:2017 Packaging of components for automatic handling - Part 1: Tape packaging of components with axial leads on continuous tapes
    NSF 426 : 2017 ENVIRONMENTAL LEADERSHIP AND CORPORATE SOCIAL RESPONSIBILITY ASSESSMENT OF SERVERS
    I.S. EN 60286-1:2017 PACKAGING OF COMPONENTS FOR AUTOMATIC HANDLING - PART 1: TAPE PACKAGING OF COMPONENTS WITH AXIAL LEADS ON CONTINUOUS TAPES
    IEC PAS 61076-3-126:2018 Connectors for electrical and electronic equipment - Product requirements - Part 3-126: Rectangular connectors - Detail specification for 5 pole power connector for industrial environments with push-pull locking
    DIN EN 15347:2008-02 Plastics - Recycled Plastics - Characterisation of plastics wastes
    DIN EN 15347 E : 2008 PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF PLASTICS WASTES
    IEC 60286-4:2013 Packaging of components for automatic handling - Part 4: Stick magazines for electronic components encapsulated in packages of different forms
    BS EN 840-1:2012 MOBILE WASTE AND RECYCLING CONTAINERS - PART 1: CONTAINERS WITH 2 WHEELS WITH A CAPACITY UP TO 400 L FOR COMB LIFTING DEVICES - DIMENSIONS AND DESIGN
    BS EN 60286-2:2015 PACKAGING OF COMPONENTS FOR AUTOMATIC HANDLING - PART 2: PACKAGING OF COMPONENTS WITH UNIDIRECTIONAL LEADS ON CONTINUOUS TAPES
    I.S. EN 61076-3-118:2010 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-118: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR A 4 POLE + PE POWER CONNECTOR WITH PUSH-PULL COUPLING
    DIN EN ISO 16396-1:2015-05 PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM, MARKING OF PRODUCTS AND BASIS FOR SPECIFICATIONS (ISO 16396-1:2015)
    08/30165041 DC : DRAFT FEB 2008 BS ISO 28078-1 - PLASTICS - POLY(PHENYLENE SULFIDE) (PPS) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS
    CEI EN 61076-3-118 : 2011 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-118: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR A 4 POLE + PE POWER CONNECTOR WITH PUSH-PULL COUPLING
    BS ISO 21507 : 2010 EARTH-MOVING MACHINERY - PERFORMANCE REQUIREMENTS FOR NON-METALLIC FUEL TANKS
    IEC GUIDE 114:2005 Environmentally conscious design - Integrating environmental aspects into design and development of electrotechnical products
    17/30333280 DC : 0 BS ISO 17422 - PLASTICS - ENVIRONMENTAL ASPECTS - GENERAL GUIDELINES FOR THEIR INCLUSION IN STANDARDS
    04/30113227 DC : DRAFT MAY 2004 ISO 21507 - EARTH-MOVING MACHINERY - REQUIREMENTS FOR NON-METALLIC TANKS
    07/30161754 DC : 0 BS ISO 15270 - PLASTICS - GUIDELINES FOR THE RECOVERY AND RECYCLING OF PLASTICS WASTE
    BS EN 60286-1:2017 PACKAGING OF COMPONENTS FOR AUTOMATIC HANDLING - PART 1: TAPE PACKAGING OF COMPONENTS WITH AXIAL LEADS ON CONTINUOUS TAPES
    11/30246444 DC : 0 BS EN 62075 ED 2.0 - AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - ENVIRONMENTALLY CONSCIOUS DESIGN
    UNI EN 15347 : 2008 PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF PLASTICS WASTES
    16/30276460 DC : 0 BS ISO 8887-1 - TECHNICAL PRODUCT DOCUMENTATION - DESIGN FOR MANUFACTURING, ASSEMBLING, DISASSEMBLING AND END-OF-LIFE PROCESSING - PART 1: GENERAL CONCEPTS AND REQUIREMENTS
    BS ISO 20140-5:2017 (published 2017-09) Automation systems and integration. Evaluating energy efficiency and other factors of manufacturing systems that influence the environment Environmental performance evaluation data
    09/30214337 DC : 0 BS EN 60286-3 - PACKAGING OF COMPONENTS FOR AUTOMATIC HANDLING - PART 3: PACKAGING OF SURFACE MOUNT COMPONENTS ON CONTINUOUS TAPES
    BS EN ISO 16396-1:2015 Plastics. Polyamide (PA) moulding and extrusion materials Designation system, marking of products and basis for specifications
    11/30199264 DC : 0 BS ISO 13106 - PLASTICS - BLOW-MOULDED POLYPROPYLENE CONTAINERS FOR PACKAGING OF LIQUID FOODSTUFFS
    BS EN 175301-801:2006 Detail specification. High density rectangular connectors, round removable crimp contacts
    BS ISO/IEC 29142-3 : 2013 INFORMATION TECHNOLOGY - PRINT CARTRIDGE CHARACTERIZATION - PART 3: ENVIRONMENT
    BS EN 61076-3-120:2016 (published 2017-01) Connectors for electronic equipment. Product requirements Rectangular connectors. Detail specification for rewirable power connectors with snap locking for rated voltage of 250 V d.c. and rated current of 30 A
    BS EN 50298 : 1999 EMPTY ENCLOSURES FOR LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - GENERAL REQUIREMENTS
    CSA PLUS 14021 : 2008 ENVIRONMENTAL CLAIMS: A GUIDE FOR INDUSTRY AND ADVERTISERS
    SAE J 2332 : 2013 MARKING OF RUBBER PARTS
    EN IEC 61076-2-111 : 2018 CONNECTORS FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-111: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR POWER CONNECTORS WITH M12 SCREW-LOCKING (IEC 61076-2-111:2017)
    UNE-EN 62208:2012 Empty enclosures for low-voltage switchgear and controlgear assemblies - General requirements
    ISO 15270:2008 Plastics Guidelines for the recovery and recycling of plastics waste
    UL 7007 : 2017 SUSTAINABILITY STANDARD FOR HOUSEHOLD MICROWAVE OVEN APPLIANCES
    CSA SPE 7007 : 2017 SUSTAINABILITY STANDARD FOR HOUSEHOLD MICROWAVE OVEN APPLIANCES
    CEI EN 60286-1 : 2001 PACKAGING OF COMPONENTS FOR AUTOMATIC HANDLING - PART 1: TAPE PACKAGING OF COMPONENTS WITH AXIAL LEADS ON CONTINUOUS TAPES
    UNI EN 15342 : 2008 PLASTICS - RECYCLED PLASTICS - CHARACTERIZATION OF POLYSTYRENE (PS) RECYCLATES
    R7005-17 Sustainability standard for household clothes drying appliances (Binational standard with AHAM 7005-2017 and UL 7005)
    UL 7004 : 2ED 2017 SUSTAINABILITY STANDARD FOR HOUSEHOLD COOKING APPLIANCES
    CSA SPE 7001 : 2012 SUSTAINABILITY STANDARD FOR HOUSEHOLD REFRIGERATION APPLIANCES
    I.S. EN 60286-3:2013 PACKAGING OF COMPONENTS FOR AUTOMATIC HANDLING - PART 3: PACKAGING OF SURFACE MOUNT COMPONENTS ON CONTINUOUS TAPES (IEC 60286-3:2013 (EQV))
    I.S. EN 175301-801:2006 DETAIL SPECIFICATION: HIGH DENSITY RECTANGULAR CONNECTORS, ROUND REMOVABLE CRIMP CONTACTS
    ISO 20140-5:2017 Automation systems and integration Evaluating energy efficiency and other factors of manufacturing systems that influence the environment Part 5: Environmental performance evaluation data
    EN ISO 14021:2016 ENVIRONMENTAL LABELS AND DECLARATIONS - SELF-DECLARED ENVIRONMENTAL CLAIMS (TYPE 2 ENVIRONMENTAL LABELLING) (ISO 14021:2016)
    I.S. EN 15551:2017 RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - BUFFERS
    ISO 21507:2010 Earth-moving machinery Performance requirements for non-metallic fuel tanks
    ISO 14021:2016 Environmental labels and declarations Self-declared environmental claims (Type II environmental labelling)
    SAE J 2642 : 2017 RECOMMENDED PRACTICE FOR DEVELOPING SPECIFICATIONS FOR AUTOMOTIVE THERMOPLASTIC MATERIALS
    PREN 840-4 : DRAFT 2010 MOBILE WASTE CONTAINERS - PART 4: CONTAINERS WITH 4 WHEELS WITH A CAPACITY UP TO 1700 L WITH FLAT LID(S), FOR WIDE TRUNNION OR BG- AND/OR WIDE COMB LIFTING DEVICES - DIMENSIONS AND DESIGN
    CSA SPE 7006 : 2017 SUSTAINABILITY STANDARD FOR HOUSEHOLD ROOM AIR CONDITIONING APPLIANCES
    I.S. EN 60286-6:2004 PACKAGING OF COMPONENTS FOR AUTOMATIC HANDLING - PART 6: BULK CASE PACKAGING FOR SURFACE MOUNTING COMPONENTS
    DIN EN 15342:2008-02 Plastics - Recycled Plastics - Characterization of polystyrene (PS) recyclates
    IEC 60286-2:2015 Packaging of components for automatic handling - Part 2: Tape packaging of components with unidirectional leads on continuous tapes
    UNE-EN ISO 14021:2017 Environmental labels and declarations - Self-declared environmental claims (Type II environmental labelling) (ISO 14021:2016)
    ONORM EN 840-2 : 2013 MOBILE WASTE CONTAINERS - PART 2: CONTAINERS WITH 4 WHEELS WITH A CAPACITY UP TO 1300 L WITH FLAT LID(S), FOR TRUNNION AND/OR COMB LIFTING DEVICES - DIMENSIONS AND DESIGN
    ONORM EN 840-1 : 2013 MOBILE WASTE AND RECYCLING CONTAINERS - PART 1: CONTAINERS WITH 2 WHEELS WITH A CAPACITY UP TO 400 L FOR COMB LIFTING DEVICES - DIMENSIONS AND DESIGN
    ONORM EN 840-3 : 2013 MOBILE WASTE CONTAINERS - PART 3: CONTAINERS WITH 4 WHEELS WITH A CAPACITY UP TO 1300 L WITH DOME LID(S), FOR TRUNNION AND/OR COMB LIFTING DEVICES - DIMENSIONS AND DESIGN
    ONORM EN 840-4 : 2013 MOBILE WASTE AND RECYCLING CONTAINERS - PART 4: CONTAINERS WITH 4 WHEELS WITH A CAPACITY UP TO 1700 L WITH FLAT LID(S), FOR WIDE TRUNNION OR BG- AND/OR WIDE COMB LIFTING DEVICES - DIMENSIONS AND DESIGN
    EN 50298:1998 Empty enclosures for low-voltage switchgear and controlgear assemblies - General requirements
    14/30311585 DC : 0 BS EN 61076-3-120 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-120: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR REWIRABLE POWER CONNECTOR WITH SNAP LOCKING FOR 250 V D.C. AND RATED CURRENT OF 30A
    10/30232449 DC : 0 BS EN 840-4 - MOBILE WASTE CONTAINERS - PART 4: CONTAINERS WITH 4 WHEELS WITH A CAPACITY UP TO 1700 L WITH FLAT LID(S), FOR WIDE TRUNNION OR BG- AND/OR WIDE COMB LIFTING DEVICES - DIMENSIONS AND DESIGN
    17/30340059 DC : 0 BS EN 61076-3-119 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-119: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR UNSHIELDED, FREE AND FIXED 10 WAY CONNECTORS WITH PUSH-PULL COUPLING FOR INDUSTRIAL ENVIRONMENTS WITH FREQUENCIES UP TO 100 MHZ
    10/30232443 DC : 0 BS EN 840-2 - MOBILE WASTE CONTAINERS - PART 2: CONTAINERS WITH 4 WHEELS WITH A CAPACITY UP TO 1300 L WITH FLAT LID(S), FOR TRUNNION AND/OR COMB LIFTING DEVICES - DIMENSIONS AND DESIGN
    DIN EN 15551 E : 2011 RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - BUFFERS
    BS ISO 28078-1 : 2009 PLASTICS - POLY(PHENYLENE SULFIDE) (PPS) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS
    11/30242519 DC : DRAFT JAN 2011 BS ISO/IEC 29142-3 - CARTRIDGE CHARACTERIZATION STANDARD - PART 3: ENVIRONMENT
    UNE-EN 16848:2017 Bio-based products - Requirements for Business to Business communication of characteristics using a Data Sheet
    DIN EN 15345 E : 2008 PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLYPROPYLENE (PP) RECYCLATES
    I.S. EN 16848:2016 BIO-BASED PRODUCTS - REQUIREMENTS FOR BUSINESS TO BUSINESS COMMUNICATION OF CHARACTERISTICS USING A DATA SHEET
    ISO 20029-1:2017 Plastics Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion Part 1: Designation system and basis for specification
    PREN 50290-2-20 : DRAFT 2016 COMMUNICATION CABLES - PART 2-20: COMMON DESIGN RULES AND CONSTRUCTION - GENERAL
    BS EN 60286-3:2013 (published 2013-11) Packaging of components for automatic handling Packaging of surface mount components on continuous tapes
    EN IEC 61076-3-119 : 2018 CONNECTORS FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-119: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR SHIELDED AND UNSHIELDED, FREE AND FIXED 10-WAY CONNECTORS WITH PUSH-PULL COUPLING FOR INDUSTRIAL ENVIRONMENTS FOR DATA TRANSMISSION WITH FREQUENCIES UP TO 100 MHZ (IEC 61076-3-119:2017)
    10/30232440 DC : 0 BS EN 840-1 - MOBILE WASTE CONTAINERS - CONTAINERS WITH 2 WHEELS WITH A CAPACITY UP TO 400 L FOR COMB LIFTING DEVICES, DIMENSIONS AND DESIGN
    08/30179153 DC : DRAFT MAR 2008 BS EN 61076-3-118 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-118: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR A 4 POLES + PE POWER CONNECTOR WITH PUSH-PULL COUPLING
    NF ISO 21507 : 2010 EARTH-MOVING MACHINERY - PERFORMANCE REQUIREMENTS FOR NON-METALLIC FUEL TANKS
    BS EN 15345 : 2007 PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLYPROPYLENE (PP) RECYCLATES
    UNE-EN 50290-2-20:2017 Communication cables - Part 2-20: Common design rules and construction - General
    BS EN 60286-4 : 2013 PACKAGING OF COMPONENTS FOR AUTOMATIC HANDLING - PART 4: STICK MAGAZINES FOR ELECTRONIC COMPONENTS ENCAPSULATED IN PACKAGES OF DIFFERENT FORMS
    CEI EN 60286-4 : 2014 PACKAGING OF COMPONENTS FOR AUTOMATIC HANDLING - PART 4: STICK MAGAZINES FOR ELECTRONIC COMPONENTS ENCAPSULATED IN PACKAGES OF DIFFERENT FORMS
    CSA SPE 7004 : 2015 SUSTAINABILITY STANDARD FOR HOUSEHOLD COOKING APPLIANCES
    I.S. EN ISO 14021:2016 ENVIRONMENTAL LABELS AND DECLARATIONS - SELF-DECLARED ENVIRONMENTAL CLAIMS (TYPE 2 ENVIRONMENTAL LABELLING) (ISO 14021:2016)
    CSA SPE 7008 : 2018 SUSTAINABILITY STANDARD FOR HOUSEHOLD DEHUMIDIFIER APPLIANCES
    I.S. EN 60286-2:2015 PACKAGING OF COMPONENTS FOR AUTOMATIC HANDLING - PART 2: PACKAGING OF COMPONENTS WITH UNIDIRECTIONAL LEADS ON CONTINUOUS TAPES
    UL 7001 : 2ED REV NOV 2015 SUSTAINABILITY STANDARD FOR HOUSEHOLD REFRIGERATION APPLIANCES
    PREN 840-1 : DRAFT 2010 MOBILE WASTE CONTAINERS - CONTAINERS WITH 2 WHEELS WITH A CAPACITY UP TO 400 L FOR COMB LIFTING DEVICES, DIMENSIONS AND DESIGN
    ECMA/TR 70 : 3ED 2004 PRODUCT-RELATED ENVIRONMENTAL DECLARATION
    UNE-EN 15551:2017 Railway applications - Railway rolling stock - Buffers
    ISO 17422:2002 Plastics Environmental aspects General guidelines for their inclusion in standards
    I.S. EN 62208:2011 EMPTY ENCLOSURES FOR LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - GENERAL REQUIREMENTS (IEC 62208:2011)
    I.S. EN 15345:2007 PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLYPROPYLENE (PP) RECYCLATES
    I.S. EN 62075:2012 AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - ENVIRONMENTALLY CONSCIOUS DESIGN (IEC 62075:2012 (EQV))
    I.S. EN 50290-2-20:2016 COMMUNICATION CABLES - PART 2-20: COMMON DESIGN RULES AND CONSTRUCTION - GENERAL
    DIN EN 840-1:2013-03 MOBILE WASTE AND RECYCLING CONTAINERS - PART 1: CONTAINERS WITH 2 WHEELS WITH A CAPACITY UP TO 400 L FOR COMB LIFTING DEVICES - DIMENSIONS AND DESIGN
    UNI EN 840-1 : 2013 MOBILE WASTE AND RECYCLING CONTAINERS - PART 1: CONTAINERS WITH 2 WHEELS WITH A CAPACITY UP TO 400 L FOR COMB LIFTING DEVICES - DIMENSIONS AND DESIGN
    UNI EN 840-4 : 2013 MOBILE WASTE AND RECYCLING CONTAINERS - PART 4: CONTAINERS WITH 4 WHEELS WITH A CAPACITY UP TO 1700 L WITH FLAT LID(S), FOR WIDE TRUNNION OR BG- AND/OR WIDE COMB LIFTING DEVICES - DIMENSIONS AND DESIGN
    BS EN 840-3:2012 MOBILE WASTE AND RECYCLING CONTAINERS - PART 3: CONTAINERS WITH 4 WHEELS WITH A CAPACITY UP TO 1300 L WITH DOME LID(S), FOR TRUNNION AND/OR COMB LIFTING DEVICES - DIMENSIONS AND DESIGN
    EN 840-3:2012 MOBILE WASTE AND RECYCLING CONTAINERS - PART 3: CONTAINERS WITH 4 WHEELS WITH A CAPACITY UP TO 1300 L WITH DOME LID(S), FOR TRUNNION AND/OR COMB LIFTING DEVICES - DIMENSIONS AND DESIGN
    BS EN 840-2:2012 MOBILE WASTE AND RECYCLING CONTAINERS - PART 2: CONTAINERS WITH 4 WHEELS WITH A CAPACITY UP TO 1300 L WITH FLAT LID(S), FOR TRUNNION AND/OR COMB LIFTING DEVICES - DIMENSIONS AND DESIGN
    I.S. EN 840-4:2012 MOBILE WASTE AND RECYCLING CONTAINERS - PART 4: CONTAINERS WITH 4 WHEELS WITH A CAPACITY UP TO 1700 L WITH FLAT LID(S), FOR WIDE TRUNNION OR BG- AND/OR WIDE COMB LIFTING DEVICES - DIMENSIONS AND DESIGN
    I.S. EN 840-1:2012 MOBILE WASTE AND RECYCLING CONTAINERS - PART 1: CONTAINERS WITH 2 WHEELS WITH A CAPACITY UP TO 400 L FOR COMB LIFTING DEVICES - DIMENSIONS AND DESIGN
    00/565497 DC : DRAFT DEC 2000 BS IEC 60601-1 MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR SAFETY AND ESSENTIAL PERFORMANCE
    ISO 16396-1:2015 Plastics — Polyamide (PA) moulding and extrusion materials — Part 1: Designation system, marking of products and basis for specifications
    EN 840-1:2012 MOBILE WASTE AND RECYCLING CONTAINERS - PART 1: CONTAINERS WITH 2 WHEELS WITH A CAPACITY UP TO 400 L FOR COMB LIFTING DEVICES - DIMENSIONS AND DESIGN
    IEC 62075:2012 Audio/video, information and communication technology equipment - Environmentally conscious design
    IEC 60286-6:2004 Packaging of components for automatic handling - Part 6: Bulk case packaging for surface mounting components
    IEC 61076-3-118:2010 Connectors for electronic equipment - Product requirements - Part 3-118: Rectangular connectors - Detail specification for a 4 pole plus PE power connector with push-pull coupling
    I.S. EN 840-3:2012 MOBILE WASTE AND RECYCLING CONTAINERS - PART 3: CONTAINERS WITH 4 WHEELS WITH A CAPACITY UP TO 1300 L WITH DOME LID(S), FOR TRUNNION AND/OR COMB LIFTING DEVICES - DIMENSIONS AND DESIGN
    EN 840-2:2012 MOBILE WASTE AND RECYCLING CONTAINERS - PART 2: CONTAINERS WITH 4 WHEELS WITH A CAPACITY UP TO 1300 L WITH FLAT LID(S), FOR TRUNNION AND/OR COMB LIFTING DEVICES - DIMENSIONS AND DESIGN
    IEC 60286-3:2013 Packaging of components for automatic handling - Part 3: Packaging of surface mount components on continuous tapes
    I.S. EN 840-2:2012 MOBILE WASTE AND RECYCLING CONTAINERS - PART 2: CONTAINERS WITH 4 WHEELS WITH A CAPACITY UP TO 1300 L WITH FLAT LID(S), FOR TRUNNION AND/OR COMB LIFTING DEVICES - DIMENSIONS AND DESIGN
    UNE-EN 840-2:2013 Mobile waste and recycling containers - Part 2: Containers with 4 wheels with a capacity up to 1 300 l with flat lid(s), for trunnion and/or comb lifting devices - Dimensions and design
    IEC 61076-3-120:2016 Connectors for electronic equipment - Product requirements - Part 3-120: Rectangular connectors - Detail specification for rewirable power connectors with snap locking for rated voltage of 250 V d.c. and rated current of 30 A
    BS PD IEC/PAS 63015 : 2016 DEFINITION OF 'LOW-HALOGEN' FOR ELECTRONIC PRODUCTS
    UNE-EN 840-3:2013 Mobile waste and recycling containers - Part 3: Containers with 4 wheels with a capacity up to 1 300 l with dome lid(s), for trunnion and/or comb lifting devices - Dimensions and design
    UNI EN 840-2 : 2013 MOBILE WASTE AND RECYCLING CONTAINERS - PART 2: CONTAINERS WITH 4 WHEELS WITH A CAPACITY UP TO 1300 L WITH FLAT LID(S), FOR TRUNNION AND/OR COMB LIFTING DEVICES - DIMENSIONS AND DESIGN
    BS EN 15342 : 2007 PLASTICS - RECYCLED PLASTICS - CHARACTERIZATION OF POLYSTYRENE (PS) RECYCLATES
    BS EN ISO 14021:2016 Environmental labels and declarations. Self-declared environmental claims (Type II environmental labelling)
    IEC 62208:2011 Empty enclosures for low-voltage switchgear and controlgear assemblies - General requirements
    EN 840-4:2012 MOBILE WASTE AND RECYCLING CONTAINERS - PART 4: CONTAINERS WITH 4 WHEELS WITH A CAPACITY UP TO 1700 L WITH FLAT LID(S), FOR WIDE TRUNNION OR BG- AND/OR WIDE COMB LIFTING DEVICES - DIMENSIONS AND DESIGN
    EN 15342 : 2007 PLASTICS - RECYCLED PLASTICS - CHARACTERIZATION OF POLYSTYRENE (PS) RECYCLATES
    EN 15347 : 2007 PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF PLASTICS WASTES
    EN 15551:2017 Railway applications - Railway rolling stock - Buffers
    EN 15345 : 2007 PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLYPROPYLENE (PP) RECYCLATES
    EN ISO 16396-1 : 2015 PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM, MARKING OF PRODUCTS AND BASIS FOR SPECIFICATIONS (ISO 16396-1:2015)
    UNE-EN 62075:2013 Audio/video, information and communication technology equipment - Environmentally conscious design
    ISO 14808:1997 Photography Composition of 135-size film canisters
    05/30139061 DC : DRAFT SEP 2005 IEC 60286-3 - PACKING OF COMPONENTS FOR AUTOMATIC HANDLING - PART 3: PACKING OF SURFACE MOUNT COMPONENTS ON CONTINUOUS TAPES
    02/205601 DC : DRAFT APR 2002 IEC 60286-6. ED. 2.0 - CAPACITORS AND RESISTORS FOR ELECTRONIC EQUIPMENT - PACKAGING OF COMPONENTS FOR AUTOMATIC HANDLING - PART 6: BULK CASE PACKAGING FOR SURFACE MOUNTING COMPONENTS
    16/30350953 DC : 0 BS EN 60286-1 ED 3.0 - PACKAGING OF COMPONENTS FOR AUTOMATIC HANDLING - PART 1: TAPE PACKAGING OF COMPONENTS WITH AXIAL LEADS ON CONTINUOUS TAPES
    DIN EN 50298 : 1999 EMPTY ENCLOSURES FOR LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - GENERAL REQUIREMENTS
    BS ISO 16365-1 : 2014 PLASTICS - THERMOPLASTIC POLYURETHANES FOR MOULDING AND EXTRUSION - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS
    AHAM 7001 : 2015 SUSTAINABILITY STANDARD FOR HOUSEHOLD REFRIGERATION APPLIANCES
    UL 7002 : 1ED 2014 SUSTAINABILITY STANDARD FOR HOUSEHOLD PORTABLE AND FLOOR CARE APPLIANCES
    06/30156414 DC : DRAFT SEP 2006 BS EN 60286-2 - PACKAGING OF COMPONENTS FOR AUTOMATIC HANDLING - PART 2: TAPE PACKAGING OF COMPONENTS WITH UNIDIRECTIONAL LEADS ON CONTINUOUS TAPES
    16/30336759 DC : 0 BS EN 50290-2-20 - COMMUNICATION CABLES - PART 2-20: COMMON DESIGN RULES AND CONSTRUCTION - GENERAL
    AHAM 7004 : 2017 SUSTAINABILITY STANDARD FOR HOUSEHOLD COOKING APPLIANCES
    BS ISO 14808 : 1997 PHOTOGRAPHY - COMPOSITION OF 135-FILM CANISTERS
    CEI EN 62075 : 2013 AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - ENVIRONMENTALLY CONSCIOUS DESIGN
    S.R. CEN/TS 16398:2012 PLASTICS - TEMPLATE FOR REPORTING AND COMMUNICATION OF BIO-BASED CARBON CONTENT AND RECOVERY OPTIONS OF BIOPOLYMERS AND BIOPLASTICS - DATA SHEET
    SAE J 2594 : 2016 RECOMMENDED PRACTICE TO DESIGN FOR RECYCLING PROTON EXCHANGE MEMBRANE (PEM) FUEL CELL SYSTEMS
    CEI EN 175301-801 : 2007 DETAIL SPECIFICATION: HIGH DENSITY RECTANGULAR CONNECTORS, ROUND REMOVABLE CRIMP CONTACTS
    IEEE 1680.3 : 2012 ENVIRONMENTAL ASSESSMENT OF TELEVISIONS
    I.S. EN IEC 61076-3-119:2018 CONNECTORS FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-119: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR SHIELDED AND UNSHIELDED, FREE AND FIXED 10-WAY CONNECTORS WITH PUSH-PULL COUPLING FOR INDUSTRIAL ENVIRONMENTS FOR DATA TRANSMISSION WITH FREQUENCIES UP TO 100 MHZ
    IEEE 1680.2:2012 ENVIRONMENTAL ASSESSMENT OF IMAGING EQUIPMENT
    I.S. EN IEC 61076-2-111:2018 CONNECTORS FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-111: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR POWER CONNECTORS WITH M12 SCREW-LOCKING
    IEC TR 62392:2006 Suitability of typical electrical insulating material (EIM) for polymer recycling
    I.S. EN ISO 16396-1:2015 PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM, MARKING OF PRODUCTS AND BASIS FOR SPECIFICATIONS (ISO 16396-1:2015)
    DIN EN 16848:2015-04 (Draft) BIO-BASED PRODUCTS - REQUIREMENTS FOR BUSINESS TO BUSINESS COMMUNICATION OF CHARACTERISTICS USING A DATA SHEET
    IEEE 1680.1-2009 IEEE Standard for Environmental Assessment of Personal Computer Products, Including Notebook Personal Computers, Desktop Personal Computers, and Personal Computer Displays
    03/314451 DC : DRAFT SEP 2003 IEC 62392 TR ED.1 - SUITABILITY OF TYPICAL ELECTRICAL INSULATING MATERIAL FOR POLYMER RECYCLING
    EN 62075:2012/AC:2013 AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - ENVIRONMENTALLY CONSCIOUS DESIGN (IEC 62075:2012)
    DIN EN 840-2:2013-03 MOBILE WASTE AND RECYCLING CONTAINERS - PART 2: CONTAINERS WITH 4 WHEELS WITH A CAPACITY UP TO 1300 L WITH FLAT LID(S), FOR TRUNNION AND/OR COMB LIFTING DEVICES - DIMENSIONS AND DESIGN
    EN 60286-6:2004 PACKAGING OF COMPONENTS FOR AUTOMATIC HANDLING - PART 6: BULK CASE PACKAGING FOR SURFACE MOUNTING COMPONENTS
    EN 60286-3:2013/AC:2013 PACKAGING OF COMPONENTS FOR AUTOMATIC HANDLING - PART 3: PACKAGING OF SURFACE MOUNT COMPONENTS ON CONTINUOUS TAPES (IEC 60286-3:2013)
    DIN EN 840-4:2013-02 MOBILE WASTE AND RECYCLING CONTAINERS - PART 4: CONTAINERS WITH 4 WHEELS WITH A CAPACITY UP TO 1700 L WITH FLAT LID(S), FOR WIDE TRUNNION OR BG- AND/OR WIDE COMB LIFTING DEVICES - DIMENSIONS AND DESIGN
    EN 61076-3-120 : 2016 Connectors for electronic equipment - Product requirements - Part 3-120: Rectangular connectors - Detail specification for rewirable power connectors with snap locking for rated voltage of 250 V d.c. and rated current of 30 A
    UL 7003 : 2ED 2016 SUSTAINABILITY STANDARD FOR HOUSEHOLD CLOTHES WASHERS
    UL 7005 : 2ED 2017 SUSTAINABILITY STANDARD FOR HOUSEHOLD CLOTHES DRYING APPLIANCES
    EN 61076-3-118 : 2010 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-118: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR A 4 POLE + PE POWER CONNECTOR WITH PUSH-PULL COUPLING

    Standards Referencing This Book - (Show below) - (Hide below)

    ISO 472:2013 Plastics Vocabulary
    ISO 1043-3:2016 Plastics Symbols and abbreviated terms Part 3: Plasticizers
    ISO 1043-2:2011 Plastics — Symbols and abbreviated terms — Part 2: Fillers and reinforcing materials
    ISO 1043-1:2011 Plastics — Symbols and abbreviated terms — Part 1: Basic polymers and their special characteristics
    ISO 1043-4:1998 Plastics Symbols and abbreviated terms Part 4: Flame retardants
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective