PREN 13361 : DRAFT 2016
|
GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF RESERVOIRS AND DAMS |
BS EN ISO 16396-2:2017
|
Plastics. Polyamide (PA) moulding and extrusion materials Preparation of test specimens and determination of properties |
ISO 18263-2:2015
|
Plastics Mixtures of polypropylene (PP) and polyethylene (PE) recyclate derived from PP and PE used for flexible and rigid consumer packaging Part 2: Preparation of test specimens and determination of properties |
16/30338108 DC : DRAFT JULY 2016
|
BS EN 13362 - GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF CANALS |
I.S. EN ISO 7792-2:2012
|
PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 7792-2:2012) |
14/30304058 DC : 0
|
BS EN ISO 17855-2 - PLASTICS - POLYETHYLENE (PE) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
PREN 13491 : DRAFT 2016
|
GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE AS A FLUID BARRIER IN THE CONSTRUCTION OF TUNNELS AND ASSOCIATED UNDERGROUND STRUCTURES |
06/30130313 DC : DRAFT MAR 2006
|
ISO 23559 - PLASTICS - FILM AND SHEETING - GUIDE FOR THE TESTING OF THERMOPLASTIC FILMS |
16/30338114 DC : 0
|
BS EN 13361 - GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF RESERVOIRS AND DAMS |
16/30334902 DC : 0
|
BS EN ISO 10350-1 - PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA - PART 1: MOULDING MATERIALS |
BS EN ISO 17855-1:2014
|
Plastics. Polyethylene (PE) moulding and extrusion materials Designation system and basis for specifications |
DIN EN ISO 17855-1:2015-02
|
PLASTICS - POLYETHYLENE (PE) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS (ISO 17855-1:2014) |
16/30338123 DC : 0
|
BS EN 16993 - GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF STORAGE LAGOONS, SECONDARY CONTAINMENT (ABOVE AND BELOW GROUND) AND OTHER CONTAINMENT APPLICATIONS FOR CHEMICALS, POLLUTED WATER AND PRODUCED LIQUIDS |
UNE-EN ISO 19069-2:2016
|
Plastics - Polypropylene (PP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 19069-2:2016) |
12/30255607 DC : 0
|
BS ISO 17855-1 - PLASTICS - POLYETHYLENE (PE) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS |
BS ISO 14127:2008
|
Carbon-fibre-reinforced composites. Determination of the resin, fibre and void contents |
DIN EN ISO 17855-2:2016-06
|
PLASTICS - POLYETHYLENE (PE) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 17855-2:2016) |
15/30315534 DC : 0
|
BS EN ISO 16396-2 - PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
BS ISO 1268-7:2001
|
Fibre-reinforced plastics. Methods of producing test plates Resin transfer moulding |
BS ISO 20753 : 2008
|
PLASTICS - TEST SPECIMENS |
I.S. EN 15502-2-1:2012
|
GAS-FIRED CENTRAL HEATING BOILERS - PART 2-1: SPECIFIC STANDARD FOR TYPE C APPLIANCES AND TYPE B2, B3 AND B5 APPLIANCES OF A NOMINAL HEAT INPUT NOT EXCEEDING 1000 KW |
PREN 4366 : 200P1
|
AEROSPACE SERIES - HEAT AND CRAZING RESISTANT CAST ACRYLIC, CROSSLINKED, MULTI-AXIALLY STRETCHED, AND LOW MOISTURE ABSORPTION - PROPERTIES |
UNE-EN ISO 17855-2:2016
|
Plastics - Polyethylene (PE) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 17855-2:2016) |
PREN 4364 : 200P1
|
AEROSPACE SERIES - CAST ACRYLIC - PROPERTIES |
PREN 4243 : 200P1
|
AEROSPACE SERIES - CAST ACRYLIC SHEETS - TECHNICAL SPECIFICATION |
DIN EN 15502-2-1:2013-01
|
GAS-FIRED CENTRAL HEATING BOILERS - PART 2-1: SPECIFIC STANDARD FOR TYPE C APPLIANCES AND TYPE B2, B3 AND B5 APPLIANCES OF A NOMINAL HEAT INPUT NOT EXCEEDING 1000 KW |
EN 16994:2018
|
Clay Geosynthetic Barriers - Characteristics required for use in the construction of underground structures (other than tunnels and associated structures) |
EN 13491:2018
|
Geosynthetic barriers - Characteristics required for use in the construction of tunnels and associated underground structures |
ASTM D 5927 : 2017 : REDLINE
|
Standard Classification System for and Basis for Specifications for Thermoplastic Polyester (TPES) Injection and Extrusion Materials Based on ISO Test Methods |
DIN EN ISO 20753:2014-07
|
PLASTICS - TEST SPECIMENS (ISO 20753:2008) |
BS EN 15347:2007
|
Plastics. Recycled Plastics. Characterization of plastics waste |
ISO 15103-2:2007
|
Plastics Poly(phenylene ether) (PPE) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties |
BS EN ISO 3167:2014
|
Plastics. Multipurpose test specimens |
DIN EN ISO 1872-2:2000-12
|
PLASTICS - POLYETHYLENE (PE) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
EN 10245-1:2011
|
Steel wire and wire products - Organic coatings on steel wire - Part 1: General rules |
CEN/TS 15534-1:2007
|
Wood-plastics composites (WPC) - Part 1: Test methods for characterisation of WPC materials and products |
EN 10245-2:2011
|
Steel wire and wire products - Organic coatings on steel wire - Part 2: PVC finished wire |
EN 10245-5:2011
|
Steel wire and wire products - Organic coatings on steel wire - Part 5: Polyamide coated wire |
DIN EN 15502-2-1:2017-09
|
Gas-fired central heating boilers - Part 2-1: Specific standard for type C appliances and type B2, B3 and B5 appliances of a nominal heat input not exceeding 1 000 kW (includes Amendment 1:2016) |
DIN EN ISO 17855-1 E : 2015
|
PLASTICS - POLYETHYLENE (PE) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS (ISO 17855-1:2014) |
18/30370230 DC : DRAFT APR 2018
|
BS ISO 6721-8 - PLASTICS - DETERMINATION OF DYNAMIC MECHANICAL PROPERTIES - PART 8: LONGITUDINAL AND SHEAR VIBRATION - WAVE-PROPAGATION METHOD |
17/30349217 DC : 0
|
BS EN ISO 21970-2 - PLASTICS - POLYKETONE (PK) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
05/30132990 DC : DRAFT APR 2005
|
ISO 20753 - PLASTICS - TEST SPECIMENS |
BS EN 10245-5:2011
|
Steel wire and wire products. Organic coatings on steel wire Polyamide coated wire |
15/30297978 DC : 0
|
BS EN 60404-13 ED 2.0 - MAGNETIC MATERIALS - PART 13: METHODS OF MEASUREMENT OF RESISTIVITY; DENSITY AND STACKING FACTOR OF ELECTRICAL STEEL STRIP AND SHEET |
BS EN 16994:2018
|
Clay Geosynthetic Barriers. Characteristics required for use in the construction of underground structures (other than tunnels and associated structures) |
BS ISO 12891-2:2014
|
Retrieval and analysis of surgical implants Analysis of retrieved surgical implants |
DIN EN ISO 19069-2:2016-07
|
PLASTICS - POLYPROPYLENE (PP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 19069-2:2016) |
DD CEN/TS 15534-1:2007
|
Wood-plastics composites (WPC) Test methods for characterisation of WPC materials and products |
PREN 4365 : 200P1
|
AEROSPACE SERIES - HEAT AND CRAZING RESISTANT CAST ACRYLIC, CROSSLINKED, AND LOW MOISTURE ABSORPTION - PROPERTIES |
DIN EN ISO 17855-2 E : 2016
|
PLASTICS - POLYETHYLENE (PE) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 17855-2:2016) |
ISO 20029-2:2017
|
Plastics Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion Part 2: Preparation of test specimens and determination of properties |
ISO 20753:2008
|
Plastics Test specimens |
DIN EN ISO 16396-2:2017-07
|
Plastics - Polyamide (PA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 16396-2:2017) |
ISO 12891-2:2014
|
Retrieval and analysis of surgical implants Part 2: Analysis of retrieved surgical implants |
UNI EN ISO 17855-1 : 2014
|
PLASTICS - POLYETHYLENE (PE) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS |
BS EN 16993:2018
|
Geosynthetic barriers. Characteristics required for use in the construction of storage lagoons, secondary containment (above and below ground) and other containment applications for chemicals, polluted water and produced liquids |
SAE J 2642 : 2017
|
RECOMMENDED PRACTICE FOR DEVELOPING SPECIFICATIONS FOR AUTOMOTIVE THERMOPLASTIC MATERIALS |
UNE-EN ISO 20028-2:2017
|
Plastics - Thermoplastic polyester (TP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 20028-2:2017) |
PREN 13362 : DRAFT 2012
|
GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF CANALS |
BS EN ISO 20753:2014
|
Plastics. Test specimens |
I.S. EN 13361:2018
|
GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF RESERVOIRS AND DAMS |
DIN EN ISO 1874-2:2013-03
|
PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 1874-2:2012) |
DIN EN ISO 8986-2 E : 2010
|
PLASTICS - POLYBUTENE-1 (PB-1) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
DIN EN ISO 15103-2:2007-09
|
PLASTICS - POLY(PHENYLENE ETHER) (PPE) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
DIN EN 15347:2008-02
|
Plastics - Recycled Plastics - Characterisation of plastics wastes |
DIN EN 14427:2014-09
|
LPG equipment and accessories - Transportable refillable fully wrapped composite cylinders for LPG - Design and construction |
DIN EN 15347 E : 2008
|
PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF PLASTICS WASTES |
BS EN ISO 1874-2:2012
|
Plastics. Polyamide (PA) moulding and extrusion materials Preparation of test specimens and determination of properties |
ISO 19069-2:2016
|
Plastics — Polypropylene (PP) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties |
BS EN ISO 1872-2:2007
|
Plastics. Polyethylene (PE) moulding and extrusion materials Preparation of test specimens and determination of properties |
I.S. EN 10245-2:2011
|
STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 2: PVC FINISHED WIRE |
I.S. EN ISO 3167:2014
|
PLASTICS - MULTIPURPOSE TEST SPECIMENS (ISO 3167:2014) |
I.S. EN 10245-1:2011
|
STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES |
I.S. EN ISO 15103-2:2007
|
PLASTICS - POLY(PHENYLENE ETHER) (PPE) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
I.S. EN 10245-4:2011
|
STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 4: POLYESTER COATED WIRE |
I.S. EN 607:2004
|
EAVES GUTTERS AND FITTINGS MADE OF PVC-U - DEFINITIONS, REQUIREMENTS AND TESTING |
DIN EN ISO 1873-2:2000-12
|
PLASTICS - POLYPROPYLENE (PP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
I.S. EN ISO 1874-2:2012
|
PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 1874-2:2012) |
I.S. EN 14427:2014
|
LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE FULLY WRAPPED COMPOSITE CYLINDERS FOR LPG - DESIGN AND CONSTRUCTION |
DIN EN 10245-5:2012-01
|
STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 5: POLYAMIDE COATED WIRE |
16/30338126 DC : 0
|
BS EN 13492 - GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF LIQUID WASTE DISPOSAL SITES, TRANSFER STATIONS OR SECONDARY CONTAINMENT |
16/30338117 DC : 0
|
BS EN 13493 - GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF SOLID WASTE STORAGE AND DISPOSAL SITES |
14/30304062 DC : 0
|
BS EN ISO 19069-2 - PLASTICS - POLYPROPYLENE (PP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
BS ISO 23559:2011
|
Plastics. Film and sheeting. Guidance on the testing of thermoplastic films |
08/30180847 DC : DRAFT JUNE 2008
|
BS EN 10245-5 - STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 5: POLYAMIDE COATED WIRE |
14/30283167 DC : 0
|
BS ISO 18263-2 - PLASTICS - MIXTURES OF POLYPROPYLENE (PP) AND POLYETHYLENE (PE) RECYCLATE DERIVED FROM PP AND PE USED FOR FLEXIBLE AND RIGID CONSUMENR PACKAGING - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
BS EN ISO 17855-2:2016
|
Plastics. Polyethylene (PE) moulding and extrusion materials Preparation of test specimens and determination of properties |
UNI EN 15347 : 2008
|
PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF PLASTICS WASTES |
BS EN ISO 20028-2:2017
|
Plastics. Thermoplastic polyester (TP) moulding and extrusion materials Preparation of test specimens and determination of properties |
UNI EN ISO 23936-1 : 2009
|
PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - NON-METALLIC MATERIALS IN CONTACT WITH MEDIA RELATED TO OIL AND GAS PRODUCTION - PART 1: THERMOPLASTICS |
BS ISO 18263-2:2015
|
Plastics. Mixtures of polypropylene (PP) and polyethylene (PE) recyclate derived from PP and PE used for flexible and rigid consumer packaging Preparation of test specimens and determination of properties |
15/30328314 DC : 0
|
BS EN ISO 20557-2 - PLASTICS - POLY(PHENYLENE ETHER) (PPE) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMEN AND DETERMINATION OF PROPERTIES |
12/30274859 DC : 0
|
BS ISO 9523 - TOURING SKI-BOOTS FOR ADULTS - INTERFACE WITH TOURING SKI-BINDINGS - REQUIREMENTS AND TEST METHODS |
UNE-EN ISO 17855-1:2015
|
Plastics - Polyethylene (PE) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 17855-1:2014) |
08/30180835 DC : DRAFT JUNE 2008
|
BS EN 10245-1 - STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES |
08/30180838 DC : DRAFT JUNE 2008
|
BS EN 10245-2 - STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 2: PVC FINISHED WIRE |
DIN EN ISO 20028-2 E : 2017
|
PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 20028-2:2017) |
BS EN 15502-2-1 : 2012
|
GAS-FIRED CENTRAL HEATING BOILERS - PART 2-1: SPECIFIC STANDARD FOR TYPE C APPLIANCES AND TYPE B2, B3 AND B5 APPLIANCES OF A NOMINAL HEAT INPUT NOT EXCEEDING 1000 KW |
I.S. EN ISO 17855-2:2016
|
PLASTICS - POLYETHYLENE (PE) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 17855-2:2016) |
I.S. EN 13491:2018
|
GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE AS A FLUID BARRIER IN THE CONSTRUCTION OF TUNNELS AND ASSOCIATED UNDERGROUND STRUCTURES |
EN 13493:2018
|
Geosynthetic barriers - Characteristics required for use in the construction of solid waste storage and disposal sites |
ISO 14127:2008
|
Carbon-fibre-reinforced composites Determination of the resin, fibre and void contents |
EN ISO 20029-2:2018
|
Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Part 2: Preparation of test specimen and determination of properties (ISO 20029-2:2017) |
ISO 8605:2001
|
Textile-glass-reinforced plastics — Sheet moulding compound (SMC) — Basis for a specification |
I.S. EN ISO 8986-2:2009
|
PLASTICS - POLYBUTENE-1 (PB-1) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
I.S. EN 13362:2018
|
GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF CANALS |
ISO 17855-2:2016
|
Plastics Polyethylene (PE) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties |
UNE-EN ISO 1874-2:2013
|
Plastics - Polyamide (PA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1874-2:2012) |
DIN EN 14427 E : 2014
|
LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE FULLY WRAPPED COMPOSITE CYLINDERS FOR LPG - DESIGN AND CONSTRUCTION |
UNI EN ISO 1874-2 : 2013
|
PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
UNI EN ISO 3167 : 2014
|
PLASTICS - MULTIPURPOSE TEST SPECIMENS |
UNI EN 14427 : 2014
|
LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE FULLY WRAPPED COMPOSITE CYLINDERS FOR LPG - DESIGN AND CONSTRUCTION |
UNI EN 10245-2 : 2011
|
STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 2: PVC FINISHED WIRE |
UNI EN 10245-1 : 2011
|
STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES |
UNI EN ISO 7792-2 : 2013
|
PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
UNI EN 10245-4 : 2011
|
Wire and drawn steel products - Organic coatings on steel wires - Part 4: Polyester coated wires |
UNI EN ISO 14910-2 : 2013
|
PLASTICS - THERMOPLASTIC POLYESTER/ESTER AND POLYETHER/ESTER ELASTOMERS FOR MOULDING AND EXTRUSION - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
EN 607:2004
|
Eaves gutters and fittings made of PVC-U - Definitions, requirements and testing |
UNI EN ISO 8986-2 : 2010
|
PLASTICS - POLYBUTENE-1 (PB-1) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
ONORM EN 14427 : 2014
|
LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE FULLY WRAPPED COMPOSITE CYLINDERS FOR LPG - DESIGN AND CONSTRUCTION |
BS EN ISO 20029-2:2018
|
Plastics. Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion Preparation of test specimens and determination of properties |
I.S. EN ISO 10350-1:2017
|
PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA - PART 1: MOULDING MATERIALS (ISO 10350-1:2017) |
I.S. EN ISO 1873-2:2007
|
PLASTICS - POLYPROPYLENE (PP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
UNI EN 10245-5 : 2011
|
STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 5: POLYAMIDE COATED WIRE |
BS ISO 1268-1:2001
|
Fibre-reinforced plastics. Methods of producing test plates General conditions |
12/30266170 DC : 0
|
BS EN 15534-1 - COMPOSITES MADE FROM CELLULOSE-BASED MATERIALS AND THERMOPLASTICS (USUALLY CALLED WOOD-POLYMER COMPOSITES (WPC) OR NATURAL FIBRE COMPOSITES (NFC)) - PART 1 : TEST METHODS FOR CHARACTERISATION OF COMPOUNDS AND PRODUCTS |
I.S. EN ISO 1872-2:2007
|
PLASTICS - POLYETHYLENE (PE) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
UNE-EN 10310:2011
|
Steel tubes and fittings for onshore and offshore pipelines - Internal and external polyamide powder based coatings |
08/30180844 DC : DRAFT JUNE 2008
|
BS EN 10245-4 - STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 4: POLYESTER COATED WIRE |
PREN 13493 : DRAFT 2016
|
GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF SOLID WASTE STORAGE AND DISPOSAL SITES |
BS EN ISO 23936-1:2009
|
Petroleum, petrochemical and natural gas industries — Non-metallic materials in contact with media related to oil and gas production Part 1: Thermoplastics |
PREN 13492 : DRAFT 2016
|
GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF LIQUID WASTE DISPOSAL SITES, TRANSFER STATIONS OR SECONDARY CONTAINMENT |
BS ISO 8605:2001
|
Textile-glass-reinforced plastics. Sheet moulding compound (SMC). Basis for specification |
DD CEN/TS 15534-2:2007
|
Wood-plastics composites (WPC) Characterisation of WPC materials |
DIN EN ISO 19069-2 E : 2016
|
PLASTICS - POLYPROPYLENE (PP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 19069-2:2016) |
13/30242622 DC : 0
|
BS ISO 12891-2 - RETRIEVAL AND ANALYSIS OF SURGICAL IMPLANTS - PART 2: ANALYSIS OF RETRIEVED SURGICAL IMPLANTS |
14/30283170 DC : 0
|
BS ISO 18263-1 - PLASTICS - MIXTURES OF POLYPROPYLENE (PP) AND POLYETHYLENE (PE) RECYCLATE DERIVED FROM PP AND PE USED FOR FLEXIBLE AND RIGID CONSUMER PACKAGING - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATION |
BS EN ISO 19069-2:2016
|
Plastics. Polypropylene (PP) moulding and extrusion materials Preparation of test specimens and determination of properties |
DIN EN ISO 16396-2 E : 2017
|
PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 16396-2:2017) |
15/30304408 DC : 0
|
BS EN ISO 20029-2 - THERMOPLASTIC POLYESTER/ESTER AND POLYETHER/ESTER ELASTOMERS FOR MOULDING AND EXTRUSION - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
UNI EN ISO 20753 : 2014
|
PLASTICS - TEST SPECIMENS |
I.S. EN 16993:2018
|
GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF STORAGE LAGOONS, SECONDARY CONTAINMENT (ABOVE AND BELOW GROUND) AND OTHER CONTAINMENT APPLICATIONS FOR CHEMICALS, POLLUTED WATER AND PRODUCED LIQUIDS |
UNE-EN ISO 16396-2:2017
|
Plastics - Polyamide (PA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 16396-2:2017) |
DIN EN ISO 20753 E : 2014
|
PLASTICS - TEST SPECIMENS (ISO 20753:2008) |
I.S. EN 16994:2018
|
CLAY GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF UNDERGROUND STRUCTURES (OTHER THAN TUNNELS AND ASSOCIATED STRUCTURES) |
I.S. EN ISO 20029-2:2018
|
PLASTICS - THERMOPLASTIC POLYESTER/ESTER AND POLYETHER/ESTER ELASTOMERS FOR MOULDING AND EXTRUSION - PART 2: PREPARATION OF TEST SPECIMEN AND DETERMINATION OF PROPERTIES (ISO 20029-2:2017) |
I.S. EN ISO 20753:2014
|
PLASTICS - TEST SPECIMENS (ISO 20753:2008) |
ISO 14910-2:2013
|
Plastics Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion Part 2: Preparation of test specimens and determination of properties |
DIN EN ISO 20028-2:2015-08 (Draft)
|
PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 20028-2:2017) |
EN 13362:2018
|
Geosynthetic Barriers - Characteristics required for use in the construction of canals |
EN ISO 20753:2014
|
PLASTICS - TEST SPECIMENS (ISO 20753:2008) |
EN 15382:2018
|
Geosynthetic barriers - Characteristics required for use in transportation infrastructure |
EN 13492:2018
|
Geosynthetic barriers - Characteristics required for use in the construction of liquid waste disposal sites, transfer stations or secondary containment |
EN 13361:2018
|
Geosynthetic barriers - Characteristics required for use in the construction of reservoirs and dams |
I.S. EN ISO 23936-1:2009
|
PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - NON-METALLIC MATERIALS IN CONTACT WITH MEDIA RELATED TO OIL AND GAS PRODUCTION - PART 1: THERMOPLASTICS |
I.S. EN ISO 14910-2:2013
|
PLASTICS - THERMOPLASTIC POLYESTER/ESTER AND POLYETHER/ESTER ELASTOMERS FOR MOULDING AND EXTRUSION - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 14910-2:2013, CORRECTED VERSION 2015-12-15) |
S.R. CEN/TS 15534-2:2007
|
WOOD-PLASTICS COMPOSITES (WPC) - PART 2: CHARACTERISATION OF WPC MATERIALS |
I.S. EN 13493:2013
|
GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF SOLID WASTE STORAGE AND DISPOSAL SITES |
ISO 1268-1:2001
|
Fibre-reinforced plastics Methods of producing test plates Part 1: General conditions |
I.S. EN 15382:2013
|
GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN TRANSPORTATION INFRASTRUCTURE |
DIN EN 607:2005-02
|
Eaves gutters and fittings made of PVC-U - Definitions, requirements and testing |
UNE-EN ISO 14910-2:2014
|
Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Part 2: Preparation of test specimens and determination of properties (ISO 14910-2:2013, Corrected version 2015-12-15) |
UNE-EN ISO 7792-2:2013
|
Plastics - Thermoplastic polyester (TP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 7792-2:2012) |
DIN EN ISO 3167:2014-11
|
PLASTICS - MULTIPURPOSE TEST SPECIMENS (ISO 3167:2014) |
DIN EN ISO 14910-2 E : 2013
|
PLASTICS - THERMOPLASTIC POLYESTER/ESTER AND POLYETHER/ESTER ELASTOMERS FOR MOULDING AND EXTRUSION - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 14910-2:2013) |
DIN EN 10245-4:2012-01
|
Steel wire and wire products - Organic coatings on steel wire - Part 4: Polyester coated wire; German version EN 10245-4:2011 |
ISO 1873-2:2007
|
Plastics Polypropylene (PP) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties |
BS EN ISO 1873-2:2007
|
Plastics. Polypropylene (PP) moulding and extrusion materials Preparation of test specimens and determination of properties |
BS EN 607:2004
|
Eaves gutters and fittings made of PVC-U. Definitions, requirements and testing |
ISO 20028-2:2017
|
Plastics — Thermoplastic polyester (TP) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties |
ISO 1874-2:2012
|
Plastics Polyamide (PA) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties |
BS EN 14427:2014
|
LPG equipment and accessories. Transportable refillable fully wrapped composite cylinders for LPG. Design and construction |
UNE-EN 10245-4:2012
|
Steel wire and wire products - Organic coatings on steel wire - Part 4: Polyester coated wire |
UNE-EN 10245-2:2012
|
Steel wire and wire products - Organic coatings on steel wire - Part 2: PVC finished wire |
UNE-EN 14427:2014
|
LPG equipment and accessories - Transportable refillable fully wrapped composite cylinders for LPG - Design and construction |
ISO 7792-2:2012
|
Plastics Thermoplastic polyester (TP) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties |
ISO 16396-2:2017
|
Plastics Polyamide (PA) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties |
BS EN 10245-4:2011
|
Steel wire and wire products. Organic coatings on steel wire Polyester coated wire |
BS EN 10245-1:2011
|
Steel wire and wire products. Organic coatings on steel wire General rules |
ISO 23936-1:2009
|
Petroleum, petrochemical and natural gas industries — Non-metallic materials in contact with media related to oil and gas production — Part 1: Thermoplastics |
ISO 3167:2014
|
Plastics Multipurpose test specimens |
ISO 8986-2:2009
|
Plastics Polybutene-1 (PB-1) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties |
UNE-EN 10245-1:2012
|
Steel wire and wire products - Organic coatings on steel wire - Part 1: General rules |
UNE-EN ISO 3167:2014
|
Plastics - Multipurpose test specimens (ISO 3167:2014) |
DIN EN 10245-1:2012-01
|
STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES |
EN ISO 17855-1:2014
|
Plastics - Polyethylene (PE) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 17855-1:2014) |
EN ISO 8986-2:2009
|
Plastics - Polybutene-1 (PB-1) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 8986-2:2009) |
EN ISO 19069-2:2016
|
Plastics - Polypropylene (PP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 19069-2:2016) |
EN 14427:2014
|
LPG equipment and accessories - Transportable refillable fully wrapped composite cylinders for LPG - Design and construction |
EN ISO 1873-2:2007
|
Plastics - Polypropylene (PP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1873-2:2007) |
EN ISO 1874-2:2012
|
Plastics - Polyamide (PA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1874-2:2012) |
EN 15347:2007
|
Plastics - Recycled Plastics - Characterisation of plastics wastes |
EN ISO 3167:2014
|
Plastics - Multipurpose test specimens (ISO 3167:2014) |
EN ISO 10350-1:2017
|
Plastics - Acquisition and presentation of comparable single-point data - Part 1: Moulding materials (ISO 10350-1:2017) |
EN ISO 16396-2:2017
|
Plastics - Polyamide (PA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 16396-2:2017) |
EN 15502-2-1:2012+A1:2016
|
Gas-fired central heating boilers - Part 2-1: Specific standard for type C appliances and type B2, B3 and B5 appliances of a nominal heat input not exceeding 1 000 kW |
EN ISO 20028-2:2017
|
Plastics - Thermoplastic polyester (TP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 20028-2:2017) |
EN ISO 17855-2:2016
|
Plastics - Polyethylene (PE) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 17855-2:2016) |
EN ISO 1872-2:2007
|
Plastics - Polyethylene (PE) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1872-2:2007) |
EN 16993:2018
|
Geosynthetic barriers - Characteristics required for use in the construction of storage lagoons, secondary containment (above and below ground) and other containment applications for chemicals, polluted water and produced liquids |
EN ISO 14910-2:2013
|
Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Part 2: Preparation of test specimens and determination of properties (ISO 14910-2:2013, Corrected version 2015-12-15) |
EN ISO 23936-1:2009
|
Petroleum, petrochemical and natural gas industries - Non-metallic materials in contact with media related to oil and gas production - Part 1: Thermoplastics (ISO 23936-1:2009) |
EN ISO 15103-2:2007
|
Plastics - Poly(phenylene ether) (PPE) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 15103-2:2007) |
EN 10245-4:2011
|
Steel wire and wire products - Organic coatings on steel wire - Part 4: Polyester coated wire |
EN ISO 7792-2:2012
|
Plastics - Thermoplastic polyester (TP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 7792-2:2012) |
ISO 23559:2007
|
Plastics Film and sheeting Guidance on the testing of thermoplastic films |
16/30338105 DC : 0
|
BS EN 16994 - CLAY GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE AS A FLUID BARRIER IN THE CONSTRUCTION OF UNDERGROUND STRUCTURES (OTHER THAN TUNNELS AND ASSOCIATED STRUCTURES) |
UNE-EN 10245-5:2012
|
Steel wire and wire products - Organic coatings on steel wire - Part 5: Polyamide coated wire |
11/30229997 DC : 0
|
BS EN 14427 - LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE COMPOSITE CYLINDERS FOR LPG - DESIGN AND CONSTRUCTION |
I.S. EN 13492:2013
|
GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF LIQUID WASTE DISPOSAL SITES, TRANSFER STATIONS OR SECONDARY CONTAINMENT |
16/30338111 DC : 0
|
BS EN 13491 - GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE AS A FLUID BARRIER IN THE CONSTRUCTION OF TUNNELS AND ASSOCIATED UNDERGROUND STRUCTURES |
I.S. EN ISO 19069-2:2016
|
PLASTICS - POLYPROPYLENE (PP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 19069-2:2016) |
07/30150249 DC : 0
|
BS EN ISO 23936-1 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - NON-METALLIC MATERIALS IN CONTACT WITH MEDIA RELATED TO OIL AND GAS PRODUCTION - PART 1: THERMOPLASTICS |
16/30338120 DC : 0
|
BS EN 15382 - GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN TRANSPORTATION INFRASTRUCTURE |
08/30170332 DC : DRAFT JAN 2008
|
BS EN ISO 8986-2 - PLASTICS - POLYBUTENE-1 (PB-1) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
15/30304402 DC : 0
|
BS EN ISO 20028-2 - PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
I.S. EN ISO 17855-1:2014
|
PLASTICS - POLYETHYLENE (PE) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS (ISO 17855-1:2014) |
BS EN 15534-1 : 2014
|
COMPOSITES MADE FROM CELLULOSE-BASED MATERIALS AND THERMOPLASTICS (USUALLY CALLED WOOD-POLYMER COMPOSITES (WPC) OR NATURAL FIBRE COMPOSITES (NFC)) - PART 1: TEST METHODS FOR CHARACTERISATION OF COMPOUNDS AND PRODUCTS |
BS ISO 9349:2017
|
Ductile iron pipes, fittings, accessories and their joints. Thermal preinsulated products |
ISO 9349:2017
|
Ductile iron pipes, fittings, accessories and their joints — Thermal preinsulated products |
I.S. EN 10245-5:2011
|
STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 5: POLYAMIDE COATED WIRE |
I.S. EN ISO 20028-2:2017
|
PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 20028-2:2017) |
I.S. EN 15534-1:2014
|
COMPOSITES MADE FROM CELLULOSE-BASED MATERIALS AND THERMOPLASTICS (USUALLY CALLED WOOD-POLYMER COMPOSITES (WPC) OR NATURAL FIBRE COMPOSITES (NFC)) - PART 1: TEST METHODS FOR CHARACTERISATION OF COMPOUNDS AND PRODUCTS |
I.S. EN ISO 16396-2:2017
|
PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 16396-2:2017) |
ISO 20557-2:2018
|
Plastics — Poly(phenylene ether) (PPE) moulding and extrusion materials — Part 2: Preparation of test specimen and determination of properties |
BS EN 13362:2018
|
Geosynthetic Barriers. Characteristics required for use in the construction of canals |
BS EN ISO 10350-1:2017
|
Plastics. Acquisition and presentation of comparable single-point data Moulding materials |
UNE-EN ISO 20753:2015
|
Plastics - Test specimens (ISO 20753:2008) |
ISO 8085-2:2001
|
Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels Metric series Specifications Part 2: Spigot fittings for butt fusion, for socket fusion using heated tools and for use with electrofusion fittings |
S.R. CEN TS 15534-1:2007
|
WOOD-PLASTICS COMPOSITES (WPC) - PART 1: TEST METHODS FOR CHARACTERISATION OF WPC MATERIALS AND PRODUCTS |
DIN EN ISO 7792-2:2013-03
|
PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 7792-2:2012) |
BS EN ISO 8986-2:2009
|
Plastics. Polybutene-1 (PB-1) moulding and extrusion materials Preparation of test specimens and determination of properties |
BS EN ISO 15103-2:2007
|
Plastics. Poly(phenylene ether) (PPE) moulding and extrusion materials Preparation of test specimens and determination of properties |
BS EN ISO 14910-2:2013
|
Plastics. Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion Preparation of test specimens and determination of properties |
ISO 1872-2:2007
|
Plastics Polyethylene (PE) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties |
ISO 17855-1:2014
|
Plastics — Polyethylene (PE) moulding and extrusion materials — Part 1: Designation system and basis for specifications |
BS EN 10245-2:2011
|
Steel wire and wire products. Organic coatings on steel wire PVC finished wire |
BS EN ISO 7792-2:2012
|
Plastics. Thermoplastic polyester (TP) moulding and extrusion materials Preparation of test specimens and determination of properties |
DIN EN 10245-2:2012-01
|
Steel wire and wire products - Organic coatings on steel wire - Part 2: PVC finished wire; German version EN 10245-2:2011 |
DIN EN ISO 14910-2:2013-06
|
PLASTICS - THERMOPLASTIC POLYESTER/ESTER AND POLYETHER/ESTER ELASTOMERS FOR MOULDING AND EXTRUSION - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 14910-2:2013) |
DIN EN ISO 8986-2:2010-04
|
PLASTICS - POLYBUTENE-1 (PB-1) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
CEN/TS 15534-2:2007
|
Wood-plastics composites (WPC) - Part 2: Characterisation of WPC materials |