ISO 12215-8:2009
Current
The latest, up-to-date edition.
Small craft — Hull construction and scantlings — Part 8: Rudders
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
08-05-2009
Important note : Users cannot be edited or removed once added to your Multi user PDF.
ISO 12215-8:2009 gives requirements on the scantlings of rudders fitted to small craft with a length of hull of up to 24 m, measured according to ISO 8666. It applies only to monohulls.
ISO 12215-8:2009 does not give requirements on rudder characteristics required for proper steering capabilities.
ISO 12215-8:2009 only considers pressure loads on the rudder due to craft manoeuvring. Loads on the rudder or its skeg, where fitted, induced by grounding or docking, where relevant, are out of scope and need to be considered separately.
Scantlings derived from ISO 12215-8:2009 are primarily intended to apply to recreational craft including charter craft.
| DevelopmentNote |
Supersedes ISO/DIS 12215-8. (05/2009)
|
| DocumentType |
Standard
|
| Pages |
44
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Standards | Relationship |
| EN ISO 12215-8:2018 | Identical |
| PN EN ISO 12215-8 : 2011 | Identical |
| NS EN ISO 12215-8 : 2009 AC 2010 | Identical |
| NF EN ISO 12215-8:2018 | Identical |
| UNE-EN ISO 12215-8:2010 | Identical |
| ÖNORM EN ISO 12215-8: 2019 04 15 | Identical |
| SN EN ISO 12215-8 : 2009 | Identical |
| NEN EN ISO 12215-8 : 2009 C1 2010 | Identical |
| NBN EN ISO 12215-8 : 2009 COR 2010 | Identical |
| DIN EN ISO 12215-8:2019-09 | Identical |
| DIN EN ISO 12215-8:2009-10 | Identical |
| I.S. EN ISO 12215-8:2009 | Identical |
| BS EN ISO 12215-8:2009 | Identical |
| UNI EN ISO 12215-8 : 2009 | Identical |
| SAC GB/T 19314.8 : 2019 | Identical |
| NF EN ISO 12215-8 : 2009 | Identical |
| SN EN ISO 12215-8:2019 | Identical |
| ONORM EN ISO 12215-8 : 2010 | Identical |
| UNE-EN ISO 12215-8:2019 | Identical |
| BS EN ISO 12215-8:2018 | Identical |
| PN-EN ISO 12215-8:2018-12 | Identical |
| BS EN ISO 25197 : 2012 | SMALL CRAFT - ELECTRICAL/ELECTRONIC CONTROL SYSTEMS FOR STEERING, SHIFT AND THROTTLE |
| EN ISO 12215-6:2008 | Small craft - Hull construction and scantlings - Part 6: Structural arrangements and details (ISO 12215-6:2008) |
| I.S. EN ISO 25197:2012 | SMALL CRAFT - ELECTRICAL/ELECTRONIC CONTROL SYSTEMS FOR STEERING, SHIFT AND THROTTLE (ISO 25197:2012) |
| DIN EN ISO 12215-6:2008-07 | SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 6: STRUCTURAL ARRANGEMENTS AND DETAILS |
| ISO 12215-6:2008 | Small craft — Hull construction and scantlings — Part 6: Structural arrangements and details |
| BS EN ISO 12215-6:2008 | Small craft. Hull construction and scantlings Structural arrangements and details |
| UNE-EN ISO 25197:2013 | Small craft - Electrical/electronic control systems for steering, shift and throttle (ISO 25197:2012) |
| UNI EN ISO 25197 : 2015 | SMALL CRAFT - ELECTRICAL/ELECTRONIC CONTROL SYSTEMS FOR STEERING, SHIFT AND THROTTLE |
| DIN EN ISO 25197:2015-03 | SMALL CRAFT - ELECTRICAL/ELECTRONIC CONTROL SYSTEMS FOR STEERING, SHIFT AND THROTTLE (ISO 25197:2012 + AMD 1:2014) |
| 17/30366966 DC : 0 | BS EN ISO 12215-7 - SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 7: SCANTLINGS DETERMINATION OF MULTIHULLS |
| ISO 25197:2012 | Small craft Electrical/electronic control systems for steering, shift and throttle |
| ONORM EN ISO 25197 : 2015 | SMALL CRAFT - ELECTRICAL/ELECTRONIC CONTROL SYSTEMS FOR STEERING, SHIFT AND THROTTLE (ISO 25197:2012 + AMD 1:2014) |
| I.S. EN ISO 12215-6:2008 | SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 6: STRUCTURAL ARRANGEMENTS AND DETAILS |
| 2003/44/EC : 2003 COR 1 2006 | DIRECTIVE 2003/44/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 16 JUNE 2003 AMENDING DIRECTIVE 94/25/EC ON THE APPROXIMATION OF THE LAWS, REGULATIONS AND ADMINISTRATIVE PROVISIONS OF THE MEMBER STATES RELATING TO RECREATIONAL CRAFT |
| ISO 12215-5:2008 | Small craft Hull construction and scantlings Part 5: Design pressures for monohulls, design stresses, scantlings determination |
| ISO 16143-2:2014 | Stainless steels for general purposes — Part 2: Corrosion-resistant semi-finished products, bars, rods and sections |
| EN 10088-3:2014 | Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes |
| 1994/25/EC : 1994 | DIRECTIVE 94/25/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 16 JUNE 1994 ON THE APPROXIMATION OF THE LAWS, REGULATIONS AND ADMINISTRATIVE PROVISIONS OF THE MEMBER STATES RELATING TO RECREATIONAL CRAFT |
| ISO 8666:2016 | Small craft Principal data |
| ISO 4948-1:1982 | Steels Classification Part 1: Classification of steels into unalloyed and alloy steels based on chemical composition |
| EN 13195-1 : 2002 | ALUMINIUM AND ALUMINIUM ALLOYS - WROUGHT AND CAST PRODUCTS FOR MARINE APPLICATIONS (SHIPBUILDING, MARINE AND OFFSHORE) - PART 1: SPECIFICATIONS |
| ISO 286-2:2010 | Geometrical product specifications (GPS) ISO code system for tolerances on linear sizes Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts |
| ISO 4948-2:1981 | Steels Classification Part 2: Classification of unalloyed and alloy steels according to main quality classes and main property or application characteristics |
| EN 10088-1:2014 | Stainless steels - Part 1: List of stainless steels |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.