ISO 12216:2002
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
Small craft Windows, portlights, hatches, deadlights and doors Strength and watertightness requirements
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Withdrawn date
03-08-2020
Superseded by
Language(s)
English, French
Published date
13-06-2002
Important note : Users cannot be edited or removed once added to your Multi user PDF.
This International Standard specifies technical requirements for windows, portlights, hatches, deadlights and doors on small craft of hull length up to 24 m, taking into account the type of craft, its design category, and the location of the appliance.
The appliances considered in this International Standard are only those that are critical for the craft's watertightness, i.e. those that could lead to flooding in case of rupture of the plate.
This International Standard is mostly intended to be used for recreational craft, but it may be used for non-recrational small craft of hull length up to 24 m, excluding lifeboats. However, it is not applicable to commercial or work boats used in severe conditions.
| DevelopmentNote |
Supersedes ISO/DIS 12216.2 (06/2002)
|
| DocumentType |
Standard
|
| Pages |
62
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy |
| Standards | Relationship |
| ONORM EN ISO 12216 : 2002 | Identical |
| DIN EN ISO 12216:2002-10 | Identical |
| EN ISO 12216:2018 | Identical |
| EN ISO 12216:2002 | Identical |
| I.S. EN ISO 12216:2002 | Identical |
| SN EN ISO 12216:2019 | Identical |
| ÖNORM EN ISO 12216: 2019 04 15 | Identical |
| NS-EN ISO 12216 : 2018 | Identical |
| UNE-EN ISO 12216:2003 | Identical |
| NEN EN ISO 12216 : 2002 | Identical |
| SN EN ISO 12216 : 2002 | Identical |
| JIS F 1040:2004 | Identical |
| DIN EN ISO 12216:2019-04 | Identical |
| DS EN ISO 12216 :2018 | Identical |
| DS EN ISO 12216 : 2002 | Identical |
| UNI EN ISO 12216 : 2004 | Identical |
| NBN EN ISO 12216 : 2002 | Identical |
| NF EN ISO 12216 : 2018 | Identical |
| UNE-EN ISO 12216:2019 | Identical |
| PN EN ISO 12216 : 2005 | Identical |
| BS EN ISO 12216:2002 | Identical |
| BS EN ISO 12216:2018 | Identical |
| PN EN ISO 12216:2018 | Identical |
| NS EN ISO 12216 : 1ED 2002 | Identical |
| NS-EN ISO 12216:2022 | Identical |
| UNE-EN ISO 6185-4:2012 | Inflatable boats - Part 4: Boats with a hull length of between 8 m and 24 m with a motor power rating of 15 kW and greater (ISO 6185-4:2011, Corrected version 2014-08-01) |
| 97/713938 DC : DRAFT AUG 1997 | ISO/CD 12217-2 - SMALL CRAFT - STABILITY AND BUOYANCY - METHODS OF ASSESSMENT AND CATEGORIZATION - PART 2: SAILING BOATS OVER 6M LENGTH OF HULL |
| UNE-EN ISO 12217-2:2017 | Small craft - Stability and buoyancy assessment and categorization - Part 2: Sailing boats of hull length greater than or equal to 6 m (ISO 12217-2:2015) |
| I.S. EN ISO 15085:2003 | SMALL CRAFT - MAN-OVERBOARD PREVENTION AND RECOVERY (ISO 15085:2003) |
| 96/718338 DC : DRAFT DEC 1996 | ISO/CD 12217-3 - SMALL CRAFT - STABILITY AND BUOYANCY - METHODS OF ASSESSMENT AND CATEGORIZATION - PART 3: BOATS OF UP TO AND INCLUDING 6 M LENGTH OF HULL |
| EN ISO 12215-6:2008 | Small craft - Hull construction and scantlings - Part 6: Structural arrangements and details (ISO 12215-6:2008) |
| UNI EN ISO 12215-5 : 2014 | SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 5: DESIGN PRESSURES FOR MONOHULLS, DESIGN STRESSES, SCANTLINGS DETERMINATION |
| DIN EN ISO 12217-2:2016-03 | SMALL CRAFT - STABILITY AND BUOYANCY ASSESSMENT AND CATEGORIZATION - PART 2: SAILING BOATS OF HULL LENGTH GREATER THAN OR EQUAL TO 6 M (ISO 12217-2:2015) |
| ONORM EN ISO 6185-4 : 2015 | INFLATABLE BOATS - PART 4: BOATS WITH A HULL LENGTH OF BETWEEN 8 M AND 24 M WITH A MOTOR POWER RATING OF 15 KW AND GREATER (ISO 6185-4:2011, CORRECTED VERSION 2014-08-01) |
| ISO 6185-3:2014 | Inflatable boats — Part 3: Boats with a hull length less than 8 m with a motor rating of 15 kW and greater |
| ISO 6185-4:2011 | Inflatable boats Part 4: Boats with a hull length of between 8 m and 24 m with a motor power rating of 15 kW and greater |
| UNE-EN ISO 6185-3:2015 | Inflatable boats - Part 3: Boats with a hull length less than 8 m with a motor rating of 15 kW and greater (ISO 6185-3:2014) |
| DIN EN ISO 6185-4:2011-10 | INFLATABLE BOATS - PART 4: BOATS WITH A HULL LENGTH OF BETWEEN 8 M AND 24 M WITH A MOTOR POWER RATING OF 15 KW AND GREATER |
| BS EN ISO 9094:2017 | Small craft. Fire protection |
| UNI EN ISO 6185-4 : 2011 | INFLATABLE BOATS - PART 4: BOATS WITH A HULL LENGTH OF BETWEEN 8 M AND 24 M WITH A MOTOR POWER RATING OF 15 KW AND GREATER |
| DIN EN ISO 6185-3:2014-12 | INFLATABLE BOATS - PART 3: BOATS WITH A HULL LENGTH LESS THAN 8 M WITH A MOTOR POWER RATING OF 15 KW AND GREATER (ISO 6185-3:2014) |
| 17/30342710 DC : 0 | BS EN ISO 12215-5 - SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 5: DESIGN PRESSURES FOR MONOHULLS, DESIGN STRESSES, SCANTLINGS DETERMINATION |
| UNI EN ISO 12215-6 : 2008 | SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 6: STRUCTURAL ARRANGEMENTS AND DETAILS |
| 97/719524 DC : DRAFT NOV 1997 | ISO/CD 12217-1.2 - SMALL CRAFT - STABILITY AND BUOYANCY - METHODS OF ASSESSMENT AND CATEGORIZATION - PART 1: NON-SAILING BOATS OVER 6 M LENGTH OF HULL |
| BS EN ISO 12217-3:2017 | Small craft. Stability and buoyancy assessment and categorization Boats of hull length less than 6 m |
| I.S. EN ISO 6185-4:2011 | INFLATABLE BOATS - PART 4: BOATS WITH A HULL LENGTH OF BETWEEN 8 M AND 24 M WITH A MOTOR POWER RATING OF 15 KW AND GREATER (ISO 6185-4:2011, CORRECTED VERSION 2014-08-01) |
| BS EN ISO 11812:2002 | Small craft. Watertight cockpits and quick-draining cockpits |
| I.S. EN ISO 9094:2017 | SMALL CRAFT - FIRE PROTECTION (ISO 9094:2015) |
| ISO 15085:2003 | Small craft — Man-overboard prevention and recovery |
| DIN EN ISO 12215-6:2008-07 | SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 6: STRUCTURAL ARRANGEMENTS AND DETAILS |
| ISO 12217-1:2015 | Small craft — Stability and buoyancy assessment and categorization — Part 1: Non-sailing boats of hull length greater than or equal to 6 m |
| BS EN ISO 6185-4:2011 | Inflatable boats Boats with a hull length of between 8 m and 24 m with a motor power rating of 15 kW and greater |
| UNE-EN ISO 9094:2017 | Small craft - Fire protection (ISO 9094:2015) |
| ISO 12217-2:2015 | Small craft — Stability and buoyancy assessment and categorization — Part 2: Sailing boats of hull length greater than or equal to 6 m |
| DIN EN ISO 12215-5:2014-10 | SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 5: DESIGN PRESSURES FOR MONOHULLS, DESIGN STRESSES, SCANTLINGS DETERMINATION (ISO 12215-5:2008 + AMD 1:2014) |
| NF EN ISO 6185-4 : 2011 | INFLATABLE BOATS - PART 4: BOATS WITH AN HULL LENGTH OF BETWEEN 8 M AND 24 M WITH A MOTOR POWER RATING OF 15 KW AND GREATER |
| 10/30197659 DC : 0 | BS ISO 9094 - SMALL CRAFT - FIRE PROTECTION |
| ISO 11812:2001 | Small craft Watertight cockpits and quick-draining cockpits |
| I.S. EN ISO 6185-3:2014 | INFLATABLE BOATS - PART 3: BOATS WITH A HULL LENGTH LESS THAN 8 M WITH A MOTOR RATING OF 15 KW AND GREATER (ISO 6185-3:2014) |
| BS EN ISO 15083:2003 | Small craft. Bilge-pumping systems |
| BS EN ISO 12215-5 : 2008 | SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 5: DESIGN PRESSURES FOR MONOHULLS, DESIGN STRESSES, SCANTLINGS DETERMINATION |
| EN ISO 11812:2001 | Small craft - Watertight cockpits and quick-draining cockpits (ISO 11812:2001) |
| UNE-EN ISO 12215-5:2008 | Small craft - Hull construction and scantlings - Part 5: Design pressures for monohulls, design stresses, scantlings determination (ISO 12215-5:2008) |
| EN ISO 9094:2017 | Small craft - Fire protection (ISO 9094:2015) |
| DIN EN ISO 9094:2016-05 | Small craft - Fire protection (ISO 9094:2015) |
| ISO 15083:2003 | Small craft - Bilge-pumping systems |
| DIN EN ISO 12217-1:2016-08 | SMALL CRAFT - STABILITY AND BUOYANCY ASSESSMENT AND CATEGORIZATION - PART 1: NON-SAILING BOATS OF HULL LENGTH GREATER THAN OR EQUAL TO 6 M (ISO 12217-1:2015) |
| EN ISO 15083:2003 | Small craft - Bilge-pumping systems (ISO 15083:2003) |
| 01/710250 DC : DRAFT JUL 2001 | BS EN ISO 15083 - SMALL CRAFT - BILGE PUMPING SYSTEM |
| 12/30272176 DC : 0 | BS EN ISO 9094 - SMALL CRAFT - FIRE PROTECTION |
| ISO 12215-5:2008 | Small craft Hull construction and scantlings Part 5: Design pressures for monohulls, design stresses, scantlings determination |
| I.S. EN ISO 12217-2:2017 | SMALL CRAFT - STABILITY AND BUOYANCY ASSESSMENT AND CATEGORIZATION - PART 2: SAILING BOATS OF HULL LENGTH GREATER THAN OR EQUAL TO 6 M (ISO 12217-2:2015) |
| I.S. EN ISO 15083:2003 | SMALL CRAFT - BILGE-PUMPING SYSTEMS |
| ONORM EN ISO 12215-5 : 2014 | SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 5: DESIGN PRESSURES FOR MONOHULLS, DESIGN STRESSES, SCANTLINGS DETERMINATION (ISO 12215-5:2008 + AMD 1:2014) |
| BS EN ISO 6185-3:2014 | Inflatable boats Boats with a hull length less than 8 m with a motor rating of 15 kW and greater |
| BS EN ISO 15085:2003 | Small craft. Man-overboard prevention and recovery |
| UNI EN ISO 6185-3 : 2014 | INFLATABLE BOATS - PART 3: BOATS WITH A HULL LENGTH LESS THAN 8 M WITH A MOTOR RATING OF 15 KW AND GREATER |
| EN ISO 12217-3:2017 | Small craft - Stability and buoyancy assessment and categorization - Part 3: Boats of hull length less than 6 m (ISO 12217-3:2015) |
| DIN EN ISO 15085:2009-10 | SMALL CRAFT - MAN-OVERBOARD PREVENTION AND RECOVERY |
| EN ISO 12217-1:2017 | Small craft - Stability and buoyancy assessment and categorization - Part 1: Non-sailing boats of hull length greater than or equal to 6 m (ISO 12217-1:2015) |
| EN ISO 12217-2:2017 | Small craft - Stability and buoyancy assessment and categorization - Part 2: Sailing boats of hull length greater than or equal to 6 m (ISO 12217-2:2015) |
| UNE-EN ISO 12217-3:2017 | Small craft - Stability and buoyancy assessment and categorization - Part 3: Boats of hull length less than 6 m (ISO 12217-3:2015) |
| ONORM EN ISO 12215-6 : 2008 | SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 6: STRUCTURAL ARRANGEMENTS AND DETAILS |
| ISO 9094:2015 | Small craft — Fire protection |
| I.S. EN ISO 12217-3:2017 | SMALL CRAFT - STABILITY AND BUOYANCY ASSESSMENT AND CATEGORIZATION - PART 3: BOATS OF HULL LENGTH LESS THAN 6 M (ISO 12217-3:2015) |
| ISO 12215-6:2008 | Small craft — Hull construction and scantlings — Part 6: Structural arrangements and details |
| I.S. EN ISO 11812:2002 | SMALL CRAFT - WATERTIGHT COCKPITS AND QUICK-DRAINING COCKPITS |
| ISO 12217-3:2015 | Small craft — Stability and buoyancy assessment and categorization — Part 3: Boats of hull length less than 6 m |
| UNE-EN ISO 12217-1:2017 | Small craft - Stability and buoyancy assessment and categorization - Part 1: Non-sailing boats of hull length greater than or equal to 6 m (ISO 12217-1:2015) |
| EN ISO 6185-3:2014 | Inflatable boats - Part 3: Boats with a hull length less than 8 m with a motor rating of 15 kW and greater (ISO 6185-3:2014) |
| EN ISO 6185-4:2011 | Inflatable boats - Part 4: Boats with a hull length of between 8 m and 24 m with a motor power rating of 15 kW and greater (ISO 6185-4:2011, Corrected version 2014-08-01) |
| I.S. EN ISO 12215-6:2008 | SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 6: STRUCTURAL ARRANGEMENTS AND DETAILS |
| I.S. EN ISO 12217-1:2017 | SMALL CRAFT - STABILITY AND BUOYANCY ASSESSMENT AND CATEGORIZATION - PART 1: NON-SAILING BOATS OF HULL LENGTH GREATER THAN OR EQUAL TO 6 M (ISO 12217-1:2015) |
| DIN EN ISO 15083:2003-06 | SMALL CRAFT - BILGE PUMPING SYSTEMS |
| ONORM EN ISO 6185-3 : 2014 | INFLATABLE BOATS - PART 3: BOATS WITH A HULL LENGTH LESS THAN 8 M WITH A MOTOR RATING OF 15 KW AND GREATER (ISO 6185-3:2014) |
| ISO 9094-1:2003 | Small craft Fire protection Part 1: Craft with a hull length of up to and including 15 m |
| EN ISO 11812:2001 | Small craft - Watertight cockpits and quick-draining cockpits (ISO 11812:2001) |
| ISO 9094-2:2002 | Small craft Fire protection Part 2: Craft with a hull length of over 15 m |
| ISO 6603-1:2000 | Plastics Determination of puncture impact behaviour of rigid plastics Part 1: Non-instrumented impact testing |
| EN 1523:1998 | Windows, doors, shutters and blinds - Bullet resistance - Test method |
| ISO/TR 15510:1997 | Stainless steels Chemical composition |
| 1994/25/EC : 1994 | DIRECTIVE 94/25/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 16 JUNE 1994 ON THE APPROXIMATION OF THE LAWS, REGULATIONS AND ADMINISTRATIVE PROVISIONS OF THE MEMBER STATES RELATING TO RECREATIONAL CRAFT |
| ISO 8666:2016 | Small craft Principal data |
| ISO 7823-1:2003 | Plastics — Poly(methyl methacrylate) sheets — Types, dimensions and characteristics — Part 1: Cast sheets |
| EN ISO 6603-1:2000 | Plastics - Determination of puncture impact behaviour of rigid plastics - Part 1: Non-instrumented impact testing (ISO 6603-1:2000) |
| EN 1063:1999 | Glass in building - Security glazing - Testing and classification of resistance against bullet attack |
| ISO 11812:2001 | Small craft Watertight cockpits and quick-draining cockpits |
| EN 356:1999 | Glass in building - Security glazing - Testing and classification of resistance against manual attack |
| EN 1522:1998 | Windows, doors, shutters and blinds - Bullet resistance - Requirements and classification |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.