ISO 12217-1:2015
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Small craft — Stability and buoyancy assessment and categorization — Part 1: Non-sailing boats of hull length greater than or equal to 6 m
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Superseded date
16-12-2022
Superseded by
Language(s)
French, English
Published date
15-10-2015
Important note : Users cannot be edited or removed once added to your Multi user PDF.
ISO 12217-1:2015 specifies methods for evaluating the stability and buoyancy of intact (i.e. undamaged) boats. The flotation characteristics of boats susceptible to swamping are also encompassed.
The evaluation of stability and buoyancy properties using this part of ISO 12217 will enable the boat to be assigned to a design category (A, B, C or D) appropriate to its design and maximum total load.
ISO 12217-1:2015 is principally applicable to boats propelled by human or mechanical power of 6 m up to 24 m hull length. However, it can also be applied to boats of under 6 m if they do not attain the desired design category specified in ISO 12217‑3 and they are decked and have quick-draining recesses which comply with ISO 11812.
In relation to habitable multihulls, ISO 12217-1:2015 includes assessment of susceptibility to inversion, definition of viable means of escape and requirements for inverted flotation.
ISO 12217-1:2015 excludes:
inflatable and rigid-inflatable boats covered by ISO 6185, except for references made in ISO 6185 to specific clauses of ISO 12217;
personal watercraft covered by ISO 13590 and other similar powered craft;
gondolas and pedalos;
sailing surfboards;
surfboards, including powered surfboards;
hydrofoils and hovercraft when not operating in the displacement mode; and
submersibles.
ISO 12217-1:2015 does not include or evaluate the effects on stability of towing, fishing, dredging or lifting operations, which need to be separately considered if appropriate.
| DevelopmentNote |
Supersedes ISO/FDIS 12217-1. (10/2015)
|
| DocumentType |
Standard
|
| Pages |
78
|
| PublisherName |
International Organization for Standardization
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| NEN EN ISO 12217-1 : 2017 | Identical |
| DIN EN ISO 12217-1:2016-08 | Identical |
| EN ISO 12217-1:2017 | Identical |
| UNE-EN ISO 12217-1:2016 | Identical |
| GOST ISO 12217-1 : 2016 | Identical |
| NBN EN ISO 12217-1 : 2015 | Identical |
| UNI EN ISO 12217-1 : 2013 | Identical |
| NF EN ISO 12217-1 : 2017 | Identical |
| I.S. EN ISO 12217-1:2017 | Identical |
| BS EN ISO 12217-1:2015 | Identical |
| UNI EN ISO 12217-1:2015 | Identical |
| NS EN ISO 12217-1 : 2017 | Identical |
| UNE-EN ISO 12217-1:2017 | Identical |
| BS EN ISO 12217-1:2017 | Identical |
| SN EN ISO 12217-1 : 2018 | Identical |
| ONORM EN ISO 12217-1 : 2018 | Identical |
| PN EN ISO 12217-1 : 2017 | Identical |
| UNE-EN ISO 12217-3:2017 | Small craft - Stability and buoyancy assessment and categorization - Part 3: Boats of hull length less than 6 m (ISO 12217-3:2015) |
| UNE-EN ISO 6185-4:2012 | Inflatable boats - Part 4: Boats with a hull length of between 8 m and 24 m with a motor power rating of 15 kW and greater (ISO 6185-4:2011, Corrected version 2014-08-01) |
| 97/713938 DC : DRAFT AUG 1997 | ISO/CD 12217-2 - SMALL CRAFT - STABILITY AND BUOYANCY - METHODS OF ASSESSMENT AND CATEGORIZATION - PART 2: SAILING BOATS OVER 6M LENGTH OF HULL |
| 96/718338 DC : DRAFT DEC 1996 | ISO/CD 12217-3 - SMALL CRAFT - STABILITY AND BUOYANCY - METHODS OF ASSESSMENT AND CATEGORIZATION - PART 3: BOATS OF UP TO AND INCLUDING 6 M LENGTH OF HULL |
| 13/30229200 DC : 0 | BS EN ISO 6185-3 - INFLATABLE BOATS - PART 3: BOATS WITH A MAXIMUM MOTOR POWER RATING OF 15 KW AND GREATER |
| ISO 12217-3:2015 | Small craft — Stability and buoyancy assessment and categorization — Part 3: Boats of hull length less than 6 m |
| UNE-EN ISO 6185-3:2015 | Inflatable boats - Part 3: Boats with a hull length less than 8 m with a motor rating of 15 kW and greater (ISO 6185-3:2014) |
| DIN EN ISO 6185-4:2011-10 | INFLATABLE BOATS - PART 4: BOATS WITH A HULL LENGTH OF BETWEEN 8 M AND 24 M WITH A MOTOR POWER RATING OF 15 KW AND GREATER |
| DIN EN ISO 6185-3:2014-12 | INFLATABLE BOATS - PART 3: BOATS WITH A HULL LENGTH LESS THAN 8 M WITH A MOTOR POWER RATING OF 15 KW AND GREATER (ISO 6185-3:2014) |
| UNI EN ISO 6185-4 : 2011 | INFLATABLE BOATS - PART 4: BOATS WITH A HULL LENGTH OF BETWEEN 8 M AND 24 M WITH A MOTOR POWER RATING OF 15 KW AND GREATER |
| UNE-EN ISO 14895:2016 | Small craft - Liquid-fuelled galley stoves and heating appliances (ISO 14895:2016) |
| UNE-EN ISO 12217-2:2017 | Small craft - Stability and buoyancy assessment and categorization - Part 2: Sailing boats of hull length greater than or equal to 6 m (ISO 12217-2:2015) |
| BS EN ISO 12217-3:2017 | Small craft. Stability and buoyancy assessment and categorization Boats of hull length less than 6 m |
| I.S. EN ISO 6185-4:2011 | INFLATABLE BOATS - PART 4: BOATS WITH A HULL LENGTH OF BETWEEN 8 M AND 24 M WITH A MOTOR POWER RATING OF 15 KW AND GREATER (ISO 6185-4:2011, CORRECTED VERSION 2014-08-01) |
| BS EN ISO 11812:2002 | Small craft. Watertight cockpits and quick-draining cockpits |
| PREN ISO 6185-3 : DRAFT 2013 | INFLATABLE BOATS - PART 3: BOATS WITH A MAXIMUM MOTOR POWER RATING OF 15 KW AND GREATER (ISO/DIS 6185-3:2013) |
| DIN EN ISO 12217-2:2016-03 | SMALL CRAFT - STABILITY AND BUOYANCY ASSESSMENT AND CATEGORIZATION - PART 2: SAILING BOATS OF HULL LENGTH GREATER THAN OR EQUAL TO 6 M (ISO 12217-2:2015) |
| ISO 6185-3:2014 | Inflatable boats — Part 3: Boats with a hull length less than 8 m with a motor rating of 15 kW and greater |
| I.S. EN ISO 12217-3:2017 | SMALL CRAFT - STABILITY AND BUOYANCY ASSESSMENT AND CATEGORIZATION - PART 3: BOATS OF HULL LENGTH LESS THAN 6 M (ISO 12217-3:2015) |
| ISO 15085:2003 | Small craft — Man-overboard prevention and recovery |
| ISO 12217-2:2015 | Small craft — Stability and buoyancy assessment and categorization — Part 2: Sailing boats of hull length greater than or equal to 6 m |
| DIN EN ISO 14946:2001-12 | Small craft - Maximum load capacity (ISO 14946:2001); English version DIN EN ISO 14946 |
| BS EN ISO 14895:2016 | Small craft. Liquid-fuelled galley stoves and heating appliances |
| I.S. EN ISO 14895:2016 | SMALL CRAFT - LIQUID-FUELLED GALLEY STOVES AND HEATING APPLIANCES (ISO 14895:2016) |
| ISO 11812:2001 | Small craft Watertight cockpits and quick-draining cockpits |
| NF EN ISO 6185-4 : 2011 | INFLATABLE BOATS - PART 4: BOATS WITH AN HULL LENGTH OF BETWEEN 8 M AND 24 M WITH A MOTOR POWER RATING OF 15 KW AND GREATER |
| UNE-EN ISO 10239:2017 | Small craft - Liquefied petroleum gas (LPG) systems (ISO 10239:2014) |
| BS EN ISO 10239:2017 | Small craft. Liquefied petroleum gas (LPG) systems |
| BS EN ISO 6185-4:2011 | Inflatable boats Boats with a hull length of between 8 m and 24 m with a motor power rating of 15 kW and greater |
| EN ISO 11812:2001 | Small craft - Watertight cockpits and quick-draining cockpits (ISO 11812:2001) |
| I.S. EN ISO 10239:2017 | SMALL CRAFT - LIQUEFIED PETROLEUM GAS (LPG) SYSTEMS (ISO 10239:2014) |
| ISO 14895:2016 | Small craft Liquid-fuelled galley stoves and heating appliances |
| 14/30293325 DC : 0 | BS EN ISO 15085 - SMALL CRAFT - MAN-OVERBOARD PREVENTION AND RECOVERY |
| 14/30279885 DC : 0 | BS EN ISO 14895 - SMALL CRAFT - LIQUID-FUELLED GALLEY STOVES AND HEATING APPLIANCES |
| I.S. EN ISO 14946:2002 | SMALL CRAFT - MAXIMUM LOAD CAPACITY |
| I.S. EN ISO 12217-2:2017 | SMALL CRAFT - STABILITY AND BUOYANCY ASSESSMENT AND CATEGORIZATION - PART 2: SAILING BOATS OF HULL LENGTH GREATER THAN OR EQUAL TO 6 M (ISO 12217-2:2015) |
| ISO 10239:2014 | Small craft Liquefied petroleum gas (LPG) systems |
| BS EN ISO 6185-3:2014 | Inflatable boats Boats with a hull length less than 8 m with a motor rating of 15 kW and greater |
| BS EN ISO 15085:2003 | Small craft. Man-overboard prevention and recovery |
| UNI EN ISO 6185-3 : 2014 | INFLATABLE BOATS - PART 3: BOATS WITH A HULL LENGTH LESS THAN 8 M WITH A MOTOR RATING OF 15 KW AND GREATER |
| EN ISO 12217-3:2017 | Small craft - Stability and buoyancy assessment and categorization - Part 3: Boats of hull length less than 6 m (ISO 12217-3:2015) |
| I.S. EN ISO 10240:2004 | SMALL CRAFT - OWNER'S MANUAL (ISO 10240:2004) |
| DIN EN ISO 15085:2009-10 | SMALL CRAFT - MAN-OVERBOARD PREVENTION AND RECOVERY |
| ISO 14946:2001 | Small craft Maximum load capacity |
| EN ISO 10239:2017 | Small craft - Liquefied petroleum gas (LPG) systems (ISO 10239:2014) |
| EN ISO 12217-2:2017 | Small craft - Stability and buoyancy assessment and categorization - Part 2: Sailing boats of hull length greater than or equal to 6 m (ISO 12217-2:2015) |
| EN ISO 14895:2016 | Small craft - Liquid-fuelled galley stoves and heating appliances (ISO 14895:2016) |
| DIN EN ISO 10239:2015-05 | SMALL CRAFT - LIQUEFIED PETROLEUM GAS (LPG) SYSTEMS (ISO 10239:2014) |
| I.S. EN ISO 6185-3:2014 | INFLATABLE BOATS - PART 3: BOATS WITH A HULL LENGTH LESS THAN 8 M WITH A MOTOR RATING OF 15 KW AND GREATER (ISO 6185-3:2014) |
| 17/30366966 DC : 0 | BS EN ISO 12215-7 - SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 7: SCANTLINGS DETERMINATION OF MULTIHULLS |
| ONORM EN ISO 6185-4 : 2015 | INFLATABLE BOATS - PART 4: BOATS WITH A HULL LENGTH OF BETWEEN 8 M AND 24 M WITH A MOTOR POWER RATING OF 15 KW AND GREATER (ISO 6185-4:2011, CORRECTED VERSION 2014-08-01) |
| I.S. EN ISO 11812:2002 | SMALL CRAFT - WATERTIGHT COCKPITS AND QUICK-DRAINING COCKPITS |
| EN ISO 6185-3:2014 | Inflatable boats - Part 3: Boats with a hull length less than 8 m with a motor rating of 15 kW and greater (ISO 6185-3:2014) |
| EN ISO 6185-4:2011 | Inflatable boats - Part 4: Boats with a hull length of between 8 m and 24 m with a motor power rating of 15 kW and greater (ISO 6185-4:2011, Corrected version 2014-08-01) |
| ISO 6185-4:2011 | Inflatable boats Part 4: Boats with a hull length of between 8 m and 24 m with a motor power rating of 15 kW and greater |
| ONORM EN ISO 14946 : 2005 | SMALL CRAFT - MAXIMUM LOAD CAPACITY |
| BS EN ISO 14946:2001 | Small craft. Maximum load capacity |
| ISO 15083:2003 | Small craft - Bilge-pumping systems |
| ISO 2896:2001 | Rigid cellular plastics Determination of water absorption |
| ISO 7010:2011 | Graphical symbols Safety colours and safety signs Registered safety signs |
| ISO 14946:2001 | Small craft Maximum load capacity |
| ISO 12217-3:2015 | Small craft — Stability and buoyancy assessment and categorization — Part 3: Boats of hull length less than 6 m |
| ISO 6185-4:2011 | Inflatable boats Part 4: Boats with a hull length of between 8 m and 24 m with a motor power rating of 15 kW and greater |
| ISO 12217-2:2015 | Small craft — Stability and buoyancy assessment and categorization — Part 2: Sailing boats of hull length greater than or equal to 6 m |
| ISO 8666:2016 | Small craft Principal data |
| ASTM F 1321 : 2014 : REDLINE | Standard Guide for Conducting a Stability Test (Lightweight Survey and Inclining Experiment) to Determine the Light Ship Displacement and Centers of Gravity of a Vessel |
| ISO 9093-2:2002 | Small craft Seacocks and through-hull fittings Part 2: Non-metallic |
| ISO 11812:2001 | Small craft Watertight cockpits and quick-draining cockpits |
| ISO 10240:2004 | Small craft Owner's manual |
| ISO 3864-1:2011 | Graphical symbols Safety colours and safety signs Part 1: Design principles for safety signs and safety markings |
| ISO 15085:2003 | Small craft — Man-overboard prevention and recovery |
| ISO 12216:2002 | Small craft Windows, portlights, hatches, deadlights and doors Strength and watertightness requirements |
| ISO 9093-1:1994 | Small craft Seacocks and through-hull fittings Part 1: Metallic |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.