ISO 20340:2009
|
Paints and varnishes Performance requirements for protective paint systems for offshore and related structures |
ISO 12944-1:2017
|
Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 1: General introduction |
I.S. EN ISO 2063-1:2017
|
THERMAL SPRAYING - ZINC, ALUMINIUM AND THEIR ALLOYS - PART 1: DESIGN CONSIDERATIONS AND QUALITY REQUIREMENTS FOR CORROSION PROTECTION SYSTEMS (ISO 2063-1:2017) |
AEP-61 : 2009
|
PERFORMANCE REQUIREMENTS FOR UNDERWATER HULL PAINT SYSTEMS |
BS EN 1090-5:2017
|
Execution of steel structures and aluminium structures Technical requirements for cold-formed structural aluminium elements and cold-formed structures for roof, ceiling, floor and wall applications |
BS EN ISO 29601:2011
|
Paints and varnishes. Corrosion protection by protective paint systems. Assessment of porosity in a dry film |
ISO 12944-2:2017
|
Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 2: Classification of environments |
DIN 1988-7 E : 1988
|
DRINKING WATER SUPPLY SYSTEMS - PART 7: PREVENTION OF CORROSION AND SCALING - (DVGW CODE OF PRACTICE) |
17/30347294 DC : 0
|
BS EN 60076-22-1 - POWER TRANSFORMER AND REACTOR FITTINGS - PART 22-1: PROTECTIVE DEVICES |
05/30138471 DC : DRAFT AUG 2005
|
EN ISO 16276-2 - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - ASSESSMENT OF, AND ACCEPTANCE CRITERIA FOR, THE ADHESION/COHESION (FRACTURE STRENGTH) OF A DRY FILM - PART 2: CROSS-CUT TESTING AND X-CUT TESTING |
UNI EN ISO 11303 : 2008
|
CORROSION OF METALS AND ALLOYS - GUIDELINES FOR SELECTION OF PROTECTION METHODS AGAINST ATMOSPHERIC CORROSION |
BS EN ISO 12944-8:2017
|
Paints and varnishes. Corrosion protection of steel structures by protective paint systems Development of specifications for new work and maintenance |
I.S. EN ISO 17872:2007
|
PAINTS AND VARNISHES - GUIDELINES FOR THE INTRODUCTION OF SCRIBE MARKS THROUGH COATINGS ON METALLIC PANELS FOR CORROSION TESTING |
BS EN ISO 21227-1:2003
|
Paints and varnishes. Evaluation of defects on coated surfaces using optical imaging General guidance |
BS EN ISO 16276-2:2007
|
Corrosion protection of steel structures by protective paint systems. Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating Cross-cut testing and X-cut testing |
DIN EN ISO 16276-1:2007-08
|
CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - ASSESSMENT OF, AND ACCEPTANCE CRITERIA FOR, THE ADHESION/COHESION (FRACTURE STRENGTH) OF A COATING - PART 1: PULL-OFF TESTING |
DIN EN 1090-5:2017-07
|
EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 5: TECHNICAL REQUIREMENTS FOR COLD-FORMED STRUCTURAL ALUMINIUM ELEMENTS AND COLD-FORMED STRUCTURES FOR ROOF, CEILING, FLOOR AND WALL APPLICATIONS |
NBR 15926-2 : 2011 ERRATA 2011
|
EQUIPMENT AMUSEMENT PARK - PART 2: SAFETY REQUIREMENTS PROJECT |
17/30286850 DC : DRAFT SEP 2017
|
BS EN ISO 19277 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - QUALIFICATION TESTING AND ACCEPTANCE CRITERIA FOR PROTECTIVE COATING SYSTEMS UNDER INSULATION |
BS EN ISO 11303:2008
|
Corrosion of metals and alloys. Guidelines for selection of protection methods against atmospheric corrosion |
16/30337293 DC : 0
|
BS EN ISO 12944-9 - PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 9: PROTECTIVE PAINT SYSTEMS AND LABORATORY PERFORMANCE TEST METHODS FOR OFFSHORE AND RELATED STRUCTURES |
I.S. EN ISO 12944-5:2018
|
PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 5: PROTECTIVE PAINT SYSTEMS (ISO 12944-5:2018) |
06/30106554 DC : DRAFT APR 2006
|
ISO 17872 - PAINTS AND VARNISHES - GUIDELINES FOR THE INTRODUCTION OF SCRIBE MARKS THROUGH COATINGS ON METALLIC PANELS FOR CORROSION |
I.S. EN ISO 12944-1:2017
|
PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 1: GENERAL INTRODUCTION (ISO 12944-1:2017) |
I.S. EN ISO 29601:2011
|
PAINTS AND VARNISHES - CORROSION PROTECTION BY PROTECTIVE PAINT SYSTEMS - ASSESSMENT OF POROSITY IN A DRY FILM |
ISO 2063-2:2017
|
Thermal spraying — Zinc, aluminium and their alloys — Part 2: Execution of corrosion protection systems |
ISO 12944-8:2017
|
Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 8: Development of specifications for new work and maintenance |
BS EN ISO 17872:2007
|
Paints and varnishes. Guidelines for the introduction of scribe marks through coatings on metallic panels for corrosion testing |
ISO 15711:2003
|
Paints and varnishes — Determination of resistance to cathodic disbonding of coatings exposed to sea water |
DIN EN ISO 11303:2008-08
|
Corrosion of metals and alloys - Guidelines for selection of protection methods against atmospheric corrosion (ISO 11303:2002) |
DIN EN 1090-5 E : 2017
|
EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 5: TECHNICAL REQUIREMENTS FOR COLD-FORMED STRUCTURAL ALUMINIUM ELEMENTS AND COLD-FORMED STRUCTURES FOR ROOF, CEILING, FLOOR AND WALL APPLICATIONS |
EN ISO 12944-5:2018
|
Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 5: Protective paint systems (ISO 12944-5:2018) |
UNE-EN ISO 29601:2011
|
Paints and varnishes - Corrosion protection by protective paint systems - Assessment of porosity in a dry film (ISO 29601:2011) |
S.R. CWA 16221:2010
|
VEHICLE SECURITY BARRIERS - PERFORMANCE REQUIREMENTS, TEST METHODS AND GUIDANCE ON APPLICATION |
I.S. EN ISO 11303:2008
|
CORROSION OF METALS AND ALLOYS - GUIDELINES FOR SELECTION OF PROTECTION METHODS AGAINST ATMOSPHERIC CORROSION |
EN ISO 12944-3:2017
|
PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 3: DESIGN CONSIDERATIONS (ISO 12944-3:2017) |
EN ISO 2063-1:2017
|
Thermal spraying - Zinc, aluminium and their alloys - Part 1: Design considerations and quality requirements for corrosion protection systems (ISO 2063-1:2017) |
EN ISO 12944-1:2017
|
Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 1: General introduction (ISO 12944-1:2017) |
DIN EN ISO 2063:2005-05
|
THERMAL SPRAYING - METALLIC AND OTHER INORGANIC COATINGS - ZINC, ALUMINIUM AND THEIR ALLOYS |
EN ISO 29601:2011
|
Paints and varnishes - Corrosion protection by protective paint systems - Assessment of porosity in a dry film (ISO 29601:2011) |
I.S. EN ISO 2063-2:2017
|
THERMAL SPRAYING - ZINC, ALUMINIUM AND THEIR ALLOYS - PART 2: EXECUTION OF CORROSION PROTECTION SYSTEMS (ISO 2063-2:2017) |
ISO 12944-3:2017
|
Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 3: Design considerations |
I.S. EN ISO 2063:2005
|
THERMAL SPRAYING - METALLIC AND OTHER INORGANIC COATINGS - ZINC, ALUMINIUM AND THEIR ALLOYS |
BS ISO 11303 : 2002
|
CORROSION OF METALS AND ALLOYS - GUIDELINES FOR SELECTION OF PROTECTION METHODS AGAINST ATMOSPHERIC CORROSION |
NF ENV 1090-1 : 96 FD
|
EXECUTION OF STEEL STRUCTURES - PART 1: GENERAL RULES AND RULES FOR BUILDINGS |
16/30234880 DC : 0
|
BS EN ISO 12944-5 - PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 5: PROTECTIVE PAINT SYSTEMS |
14/30273520 DC : 0
|
BS EN ISO 2063-2 - THERMAL SPRAYING - METALLIC AND OTHER INORGANIC COATINGS - ZINC, ALUMINIUM AND THEIR ALLOYS - PART 2: CONDITIONS FOR EXECUTION OF CORROSION PROTECTION WORKS BY THERMAL SPRAY PROCESSES |
I.S. EN ISO 12944-3:2017
|
PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 3: DESIGN CONSIDERATIONS (ISO 12944-3:2017) |
AEP-63 : 2009
|
PERFORMANCE REQUIREMENTS FOR NON-SKID COATING SYSTEMS |
BS EN ISO 2063-2:2017
|
Thermal spraying. Zinc, aluminium and their alloys Execution of corrosion protection systems |
BS EN ISO 12944-3:2017
|
Paints and varnishes. Corrosion protection of steel structures by protective paint systems Design considerations |
BS EN ISO 12944-1:2017
|
Paints and varnishes. Corrosion protection of steel structures by protective paint systems General introduction |
EN ISO 2063-2:2017
|
Thermal spraying - Zinc, aluminium and their alloys - Part 2: Execution of corrosion protection systems (ISO 2063-2:2017) |
EN ISO 12944-2:2017
|
PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 2: CLASSIFICATION OF ENVIRONMENTS (ISO 12944-2:2017) |
I.S. EN ISO 12944-2:2017
|
PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 2: CLASSIFICATION OF ENVIRONMENTS (ISO 12944-2:2017) |
IEC 61892-1:2015
|
Mobile and fixed offshore units - Electrical installations - Part 1: General requirements and conditions |
BS EN ISO 2063:2005
|
Thermal spraying. Metallic and other inorganic coatings. Zinc, aluminium and their alloys |
BS EN ISO 15711:2004
|
Paints and varnishes. Determination of resistance to cathodic disbonding of coatings exposed to sea water |
14/30293263 DC : 0
|
BS IEC 61892-1 ED 3.0 - MOBILE AND FIXED OFFSHORE UNITS - ELECTRICAL INSTALLATIONS - PART 1: GENERAL REQUIREMENTS AND CONDITIONS |
BS EN ISO 16276-1:2007
|
Corrosion protection of steel structures by protective paint systems. Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating Pull-off testing |
ISO 2063:2005
|
Thermal spraying Metallic and other inorganic coatings Zinc, aluminium and their alloys |
ISO 19840:2012
|
Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Measurement of, and acceptance criteria for, the thickness of dry films on rough surfaces |
ISO 29601:2011
|
Paints and varnishes Corrosion protection by protective paint systems Assessment of porosity in a dry film |
ISO 21227-1:2003
|
Paints and varnishes — Evaluation of defects on coated surfaces using optical imaging — Part 1: General guidance |
ISO 16276-2:2007
|
Corrosion protection of steel structures by protective paint systems Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating Part 2: Cross-cut testing and X-cut testing |
ISO 16276-1:2007
|
Corrosion protection of steel structures by protective paint systems Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating Part 1: Pull-off testing |
EN ISO 15711:2004
|
Paints and varnishes - Determination of resistance to cathodic disbonding of coatings exposed to sea water (ISO 15711:2003) |
EN ISO 2063:2005
|
Thermal spraying - Metallic and other inorganic coatings - Zinc, aluminium and their alloys (ISO 2063:2005) |
EN ISO 21227-1:2003
|
Paints and varnishes - Evaluation of defects on coated surfaces using optical imaging - Part 1: General guidance (ISO 21227-1:2003) |
EN ISO 16276-2:2007
|
Corrosion protection of steel structures by protective paint systems - Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating - Part 2: Cross-cut testing and X-cut testing (ISO 16276-2:2007) |
EN ISO 11303:2008
|
Corrosion of metals and alloys - Guidelines for selection of protection methods against atmospheric corrosion (ISO 11303:2002) |
EN ISO 17872:2007
|
Paints and varnishes - Guidelines for the introduction of scribe marks through coatings on metallic panels for corrosion testing (ISO 17872:2007) |
EN ISO 16276-1:2007
|
Corrosion protection of steel structures by protective paint systems - Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating - Part 1: Pull-off testing (ISO 16276-1:2007) |
DIN 1988-7:2004-12
|
CODES OF PRACTICE FOR DRINKING WATER INSTALLATIONS (TRWI) - PART 7: PREVENTION OF CORROSION DAMAGE AND CALCAREOUS DEPOSIT FORMATION - DVGW CODE OF PRACTICE |
16/30337299 DC : 0
|
BS EN ISO 12944-8 - PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 8: DEVELOPMENT OF SPECIFICATIONS FOR NEW WORK AND MAINTENANCE |
DIN EN ISO 29601:2011-07
|
Paints and varnishes - Corrosion protection by protective paint systems - Assessment of porosity in a dry film (ISO 29601:2011) |
01/122232 DC : DRAFT JUNE 2001
|
BS ISO 20340 - PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PERFORMANCE REQUIREMENTS FOR PROTECTIVE PAINT SYSTEMS FOR OFFSHORE AND RELATED STRUCTURES |
14/30273517 DC : 0
|
BS EN ISO 2063-1 - THERMAL SPRAYING - METALLIC AND OTHER INORGANIC COATINGS - ZINC, ALUMINIUM AND THEIR ALLOYS - PART 1: PLANNING OF THE CORROSION PROTECTION SYSTEM AND COMPONENT DESIGN CONSIDERATIONS AND QUALITY REQUIREMENTS |
BS EN ISO 2063-1:2017
|
Thermal spraying. Zinc, aluminium and their alloys Design considerations and quality requirements for corrosion protection systems |
UNI EN ISO 29601 : 2011
|
PAINTS AND VARNISHES - CORROSION PROTECTION BY PROTECTIVE PAINT SYSTEMS - ASSESSMENT OF POROSITY IN A DRY FILM |
AEP-60 : 2009
|
PERFORMANCE REQUIREMENTS FOR EXTERIOR TOPSIDES COATINGS |
ISO 2063-1:2017
|
Thermal spraying Zinc, aluminium and their alloys Part 1: Design considerations and quality requirements for corrosion protection systems |
BS IEC 61892-1:2015
|
Mobile and fixed offshore units. Electrical installations General requirements and conditions |
ISO 12944-5:2018
|
Paints and varnishes Corrosion protection of steel structures by protective paint systems Part 5: Protective paint systems |
I.S. EN 1090-5:2017
|
EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 5: TECHNICAL REQUIREMENTS FOR COLD-FORMED STRUCTURAL ALUMINIUM ELEMENTS AND COLD-FORMED STRUCTURES FOR ROOF, CEILING, FLOOR AND WALL APPLICATIONS |
DIN EN ISO 12944-5:2016-06 (Draft)
|
PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 5: PROTECTIVE PAINT SYSTEMS |
EN ISO 12944-8:2017
|
Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 8: Development of specifications for new work and maintenance (ISO 12944-8:2017) |
I.S. EN ISO 12944-8:2017
|
PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 8: DEVELOPMENT OF SPECIFICATIONS FOR NEW WORK AND MAINTENANCE (ISO 12944-8:2017) |
DIN EN ISO 17872:2007-06
|
PAINTS AND VARNISHES - GUIDELINES FOR THE INTRODUCTION OF SCRIBE MARKS THROUGH COATINGS ON METALLIC PANELS FOR CORROSION TESTING |
ISO 11303:2002
|
Corrosion of metals and alloys Guidelines for selection of protection methods against atmospheric corrosion |
ISO 17872:2007
|
Paints and varnishes Guidelines for the introduction of scribe marks through coatings on metallic panels for corrosion testing |
EN 1090-5:2017
|
Execution of steel structures and aluminium structures - Part 5: Technical requirements for cold-formed structural aluminium elements and cold-formed structures for roof, ceiling, floor and wall applications |
DIN 1988-7:1988-12
|
DRINKING WATER SUPPLY SYSTEMS - PART 7: PREVENTION OF CORROSION AND SCALING - (DVGW CODE OF PRACTICE) |
DIN EN ISO 16276-2:2007-08
|
Corrosion protection of steel structures by protective paint systems - Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating - Part 2: Cross-cut testing and X-cut testing (ISO 16276-2:2007) |
DIN EN ISO 15711:2005-03
|
Paints and varnishes - Determination of resistance to cathodic disbonding of coatings exposed to sea water (ISO 15711:2003) |