ISO 4642-1:2015
|
Rubber and plastics hoses, non-collapsible, for fire-fighting service Part 1: Semi-rigid hoses for fixed systems |
BS EN ISO 13590:2003
|
Small craft. Personal watercraft. Construction and system installation requirements |
ISO 4642-2:2015
|
Rubber and plastics hoses, non-collapsible, for fire-fighting service Part 2: Semi-rigid hoses (and hose assemblies) for pumps and vehicles |
I.S. EN ISO 3821:2010
|
GAS WELDING EQUIPMENT - RUBBER HOSES FOR WELDING, CUTTING AND ALLIED PROCESSES |
03/316256 DC : DRAFT OCT 2003
|
EN ISO 8469 - SMALL CRAFT - NON-FIRE-RESISTANT FUEL HOSES |
12/30212874 DC : 0
|
BS EN ISO 6808 - PLASTICS HOSES AND HOSE ASSEMBLIES FOR SUCTION AND LOW-PRESSURE DISCHARGE OF PETROLEUM LIQUIDS - SPECIFICATION |
BS ISO 3861 : 1995 AMD 9705
|
RUBBER HOSES FOR SAND AND GRIT BLASTING - SPECIFICATION |
12/30247148 DC : 0
|
BS ISO 8469 - SMALL CRAFT - NON-FIRE-RESISTANT FUEL HOSES |
07/30162629 DC : 0
|
BS ISO 4642-1 - RUBBER AND PLASTICS HOSES, NON-COLLAPSIBLE, FOR FIRE-FIGHTING SERVICE - PART 1: SEMI-RIGID HOSES FOR FIXED SYSTEMS |
04/30110371 DC : 0
|
ISO 4641 - RUBBER HOSES AND HOSE ASSEMBLIES FOR WATER SUCTION AND DISCHARGE - SPECIFICATION |
09/30194969 DC : 0
|
BS ISO 11237 - RUBBER HOSES AND HOSE ASSEMBLIES - COMPACT WIRE-BRAID REINFORCED HYDRAULIC TYPES FOR OIL-BASED OR WATER-BASED FLUIDS - SPECIFICATION |
BS ISO 4081:2016
|
Rubber hoses and tubing for cooling systems for internal-combustion engines. Specification |
ISO 11237:2017
|
Rubber hoses and hose assemblies — Compact wire-braid-reinforced hydraulic types for oil-based or water-based fluids — Specification |
15/30317657 DC : 0
|
BS EN ISO 2398 - RUBBER HOSE, TEXTILE-REINFORCED, FOR COMPRESSED AIR - SPECIFICATION |
12/30247145 DC : 0
|
BS ISO 7840 - SMALL CRAFT - FIRE-RESISTANT FUEL HOSES |
DIN EN ISO 3821:2016-10 (Draft)
|
GAS WELDING EQUIPMENT - RUBBER HOSES FOR WELDING, CUTTING AND ALLIED PROCESSES |
BS ISO 1436:2017
|
Rubber hoses and hose assemblies. Wire-braid-reinforced hydraulic types for oil-based or water-based fluids. Specification |
PREN 13483 : DRAFT 2011
|
RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES WITH INTERNAL VAPOUR RECOVERY FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION |
09/30195768 DC : 0
|
BS ISO 6224 - THERMOPLASTICS HOSES, TEXTILE-REINFORCED, FOR GENERAL-PURPOSE WATER APPLICATIONS - SPECIFICATION |
I.S. EN 15889:2011
|
FIRE-FIGHTING HOSES - TEST METHODS |
CSA C22.2 No. 62282-2 : 2007 : R2013
|
FUEL CELL TECHNOLOGIES - PART 2: FUEL CELL MODULES |
I.S. EN ISO 1403:2008
|
RUBBER HOSES, TEXTILE-REINFORCED, FOR GENERAL-PURPOSE WATER APPLICATIONS - SPECIFICATION |
DIN EN 1947:2014-09
|
FIRE-FIGHTING HOSES - SEMI-RIGID DELIVERY HOSES AND HOSE ASSEMBLIES FOR PUMPS AND VEHICLES |
DIN EN 13483:2013-09
|
Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensing systems - Specification |
BS EN 12806:2003
|
Automotive liquefied petroleum gas components. Other than containers |
BS EN 559:2003
|
Gas welding equipment. Rubber hoses for welding, cutting and allied processes |
UNE-EN ISO 6224:2012
|
Thermoplastics hoses, textile-reinforced, for general-purpose water applications - Specification (ISO 6224:2011) |
BS EN ISO 5774:2016
|
Plastics hoses. Textile-reinforced types for compressed-air applications. Specification |
BS EN 14540:2014
|
Fire-fighting hoses. Non-percolating layflat hoses for fixed systems |
BS EN ISO 14557 : 2002
|
FIRE-FIGHTING HOSES - RUBBER AND PLASTICS SUCTION HOSES AND HOSE ASSEMBLIES |
I.S. EN ISO 14557:2003
|
FIRE-FIGHTING HOSES - RUBBER AND PLASTICS SUCTION HOSES AND HOSE ASSEMBLIES |
DIN EN ISO 6808:2000-11
|
PLASTICS HOSES AND HOSE ASSEMBLIES FOR SUCTION AND LOW-PRESSURE DISCHARGE OF PETROLEUM LIQUIDS - SPECIFICATION (ISO 6808:2014) |
DIN EN 15889:2011-09
|
Fire-fighting hoses - Test methods |
EN 62282-2:2012
|
Fuel cell technologies - Part 2: Fuel cell modules |
EN 12806:2003
|
Automotive liquefied petroleum gas components - Other than containers |
07/30162632 DC : 0
|
BS ISO 4642-2 - RUBBER AND PLASTICS HOSES, NON-COLLAPSIBLE, FOR FIRE-FIGHTING SERVICE - PART 2: SEMI-RIGID HOSES (AND HOSE ASSEMBLIES) FOR PUMPS AND VEHICLES |
11/30244908 DC : 0
|
BS EN ISO 3994 - PLASTICS HOSES - HELICAL-THERMOPLASTIC-REINFORCED THERMOPLASTICS HOSES FOR SUCTION AND DISCHARGE OF AQUEOUS MATERIALS - SPECIFICATION |
15/30317639 DC : 0
|
BS ISO 6804 - RUBBER AND PLASTICS INLET HOSES AND HOSE ASSEMBLIES FOR WASHING-MACHINES AND DISHWASHERS - SPECIFICATION |
BS EN ISO 5359 : 2014
|
ANAESTHETIC AND RESPIRATORY EQUIPMENT - LOW-PRESSURE HOSE ASSEMBLIES FOR USE WITH MEDICAL GASES |
99/716445 DC : DRAFT NOV 99
|
AUTOMOTIVE LPG FILLING SYSTEM - PART 1: DIMENSIONS AND TEST REQUIREMENTS FOR THE CONNECTOR |
ISO 5772:2015
|
Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems Specification |
PD ISO/TR 17784:2003
|
Rubber and plastic hoses and hose assemblies. Guide for use by purchasers, assemblers, installers and operating personnel |
BS ISO 3862:2009
|
Rubber hoses and hose assemblies. Rubber-covered spiral-wire-reinforced hydraulic types for oil-based or water-based fluids. Specification |
BS ISO 4642-1:2015
|
Rubber and plastics hoses, non-collapsible, for fire-fighting service Semi-rigid hoses for fixed systems |
05/30129278 DC : DRAFT FEB 2005
|
ISO/DIS 8029-2 - PLASTICS HOSE - GENERAL PURPOSE COLLAPSIBLE WATER HOSE, TEXTILE-REINFORCED - SPECIFICATION |
BS ISO 5772:2015
|
Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems. Specification |
PD ISO/TS 11619:2014
|
Polyurethane tubing for use primarily in pneumatic installations. Dimensions and specification |
16/30335320 DC : 0
|
BS ISO 4079 - RUBBER HOSES AND HOSE ASSEMBLIES - TEXTILE-REINFORCED HYDRAULIC TYPES FOR OIL-BASED OR WATER-BASED FLUIDS - SPECIFICATION |
NF EN ISO 3821 : 2010
|
GAS WELDING EQUIPMENT - RUBBER HOSES FOR WELDING, CUTTING AND ALLIED PROCESSES |
EN ISO 14557:2002/A1:2007
|
FIRE-FIGHTING HOSES - RUBBER AND PLASTICS SUCTION HOSES AND HOSE ASSEMBLIES |
BS ISO 2398 : 1995 AMD 9704
|
RUBBER HOSE, TEXTILE-REINFORCED, FOR COMPRESSED AIR - SPECIFICATION |
16/30335329 DC : 0
|
BS ISO 3862 - RUBBER HOSES AND HOSE ASSEMBLIES - RUBBER-COVERED SPIRAL-WIRE-REINFORCED HYDRAULIC TYPES FOR OIL-BASED OR WATER-BASED FLUIDS - SPECIFICATION |
DIN EN ISO 1403:2010-04
|
RUBBER HOSES, TEXTILE REINFORCED, FOR GENERAL-PURPOSE WATER APPLICATIONS - SPECIFICATION |
02/710901 DC : DRAFT SEP 2002
|
BS EN ISO 7840 - SMALL CRAFT - FIRE-RESISTANT FUEL HOSES |
BS ISO 4079:2017
|
Rubber hoses and hose assemblies. Textile-reinforced hydraulic types for oil-based or water-based fluids. Specification |
ISO 4081:2016
|
Rubber hoses and tubing for cooling systems for internal-combustion engines Specification |
ISO 4079:2017
|
Rubber hoses and hose assemblies Textile-reinforced hydraulic types for oil-based or water-based fluids Specification |
ISO 4397:2011
|
Fluid power connectors and associated components — Nominal outside diameters of tubes and nominal hose sizes |
ASTM D 3952 : 1987 : R1993
|
Specification for Rubber Hose Used in Solar Energy Systems (Withdrawn 1997) |
ECMA 139 : 1ED 90
|
3,81 MM WIDE MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE - HELICAL SCAN RECORDING - DDS FORMAT |
I.S. EN ISO 13590:2004
|
SMALL CRAFT - PERSONAL WATERCRAFT - CONSTRUCTION AND SYSTEM INSTALLATION REQUIREMENTS |
UNE-EN ISO 8469:2014
|
Small craft - Non-fire-resistant fuel hoses (ISO 8469:2013) |
EN ISO 8469:2013
|
Small craft - Non-fire-resistant fuel hoses (ISO 8469:2013) |
ISO 1823-2:1997
|
Rubber hoses and hose assemblies Part 2: Ship/dockside discharge Specification |
DIN EN 14540:2014-09
|
FIRE-FIGHTING HOSES - NON-PERCOLATING LAYFLAT HOSES FOR FIXED SYSTEMS |
UNE-EN ISO 3994:2014
|
Plastics hoses - Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials - Specification (ISO 3994:2014) |
BS EN ISO 3861:2008
|
Rubber hoses for sand and grit blasting. Specification |
I.S. EN ISO 6224:2011
|
THERMOPLASTICS HOSES, TEXTILE-REINFORCED, FOR GENERAL-PURPOSE WATER APPLICATIONS - SPECIFICATION (ISO 6224:2011) |
I.S. EN 14540:2014
|
FIRE-FIGHTING HOSES - NON-PERCOLATING LAYFLAT HOSES FOR FIXED SYSTEMS |
I.S. EN 13483:2013
|
RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES WITH INTERNAL VAPOUR RECOVERY FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION |
I.S. EN ISO 3861:2008
|
RUBBER HOSES FOR SAND AND GRIT BLASTING - SPECIFICATION |
I.S. EN ISO 1401:2016
|
RUBBER HOSES FOR AGRICULTURAL SPRAYING (ISO 1401:2016) |
I.S. EN 1947:2014
|
FIRE-FIGHTING HOSES - SEMI-RIGID DELIVERY HOSES AND HOSE ASSEMBLIES FOR PUMPS AND VEHICLES |
I.S. EN 62282-2:2012
|
FUEL CELL TECHNOLOGIES - PART 2: FUEL CELL MODULES (IEC 62282-2:2012 (EQV)) |
I.S. EN ISO 5774:2016
|
PLASTICS HOSES - TEXTILE-REINFORCED TYPES FOR COMPRESSED-AIR APPLICATIONS - SPECIFICATION (ISO 5774:2016) |
DIN EN ISO 7840:2013-12
|
SMALL CRAFT - FIRE-RESISTANT FUEL HOSES (ISO 7840:2013) |
I.S. EN ISO 2398:2016
|
RUBBER HOSES, TEXTILE-REINFORCED, FOR COMPRESSED AIR - SPECIFICATION (ISO 2398:2016) |
EN ISO 3861:2008
|
Rubber hoses for sand and grit blasting - Specification (ISO 3861:2005) |
DIN EN ISO 2398:2010-04
|
RUBBER HOSES, TEXTILE-REINFORCED, FOR COMPRESSED AIR - SPECIFICATION (ISO 2398:2016) |
I.S. EN ISO 14113:2013
|
GAS WELDING EQUIPMENT - RUBBER AND PLASTICS HOSE AND HOSE ASSEMBLIES FOR USE WITH INDUSTRIAL GASES UP TO 450 BAR (45 MPA) (ISO 14113:2013) |
DIN EN ISO 3821:2010-07
|
GAS WELDING EQUIPMENT - RUBBER HOSES FOR WELDING, CUTTING AND ALLIED PROCESSES |
I.S. EN ISO 3994:2014
|
PLASTICS HOSES - HELICAL-THERMOPLASTIC-REINFORCED THERMOPLASTICS HOSES FOR SUCTION AND DISCHARGE OF AQUEOUS MATERIALS - SPECIFICATION (ISO 3994:2014) |
I.S. EN 694:2014
|
FIRE-FIGHTING HOSES - SEMI-RIGID HOSES FOR FIXED SYSTEMS |
CEI EN 62282-2 : 2013
|
FUEL CELL TECHNOLOGIES - PART 2: FUEL CELL MODULES |
I.S. EN 1360:2013
|
RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION |
DIN EN 1947:2002-11
|
FIRE-FIGHTING HOSES - SEMI-RIGID DELIVERY HOSES AND HOSE ASSEMBLIES FOR PUMPS AND VEHICLES |
I.S. EN ISO 5771:2008
|
RUBBER HOSES AND HOSE ASSEMBLIES FOR TRANSFERRING ANHYDROUS AMMONIA - SPECIFICATION |
DIN EN ISO 14557:2008-01
|
Fire-fighting hoses - Rubber and plastics suction hoses and hose assemblies (ISO 14557:2002 + AMD 1:2007); German version EN ISO 14557:2002 + A1:2007 |
I.S. EN ISO 6808:2014
|
PLASTICS HOSES AND HOSE ASSEMBLIES FOR SUCTION AND LOW-PRESSURE DISCHARGE OF PETROLEUM LIQUIDS - SPECIFICATION (ISO 6808:2014) |
I.S. EN ISO 6806:2017
|
RUBBER HOSES AND HOSE ASSEMBLIES FOR USE IN OIL BURNERS - SPECIFICATION (ISO 6806:2017) |
UNI EN 694 : 2014
|
FIRE-FIGHTING HOSES - SEMI-RIGID HOSES FOR FIXED SYSTEMS |
BS 4749:1984
|
Specification for textile reinforced rubber hydraulic hoses and hose assemblies |
BS 4983:1984
|
Specification for textile reinforced thermoplastics hydraulic hoses and hose assemblies |
ONORM EN 13483 : 2013
|
RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES WITH INTERNAL VAPOUR RECOVERY FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION |
I.S. EN 12806:2003
|
AUTOMOTIVE LIQUEFIED PETROLEUM GAS COMPONENTS - OTHER THAN CONTAINERS |
BS 4586:1984
|
Specification for spiral wire reinforced rubber covered hydraulic hoses and hose assemblies |
UNI EN ISO 3861 : 2009
|
RUBBER HOSES FOR SAND AND GRIT BLASTING - SPECIFICATION |
ONORM EN ISO 3861 : 2010
|
RUBBER HOSES FOR SAND AND GRIT BLASTING - SPECIFICATION |
BS EN ISO 8029:2014
|
Plastics hose. General-purpose collapsible water hose, textile-reinforced. Specification |
15/30317645 DC : 0
|
BS EN ISO 6806 - RUBBER HOSES AND HOSE ASSEMBLIES FOR USE IN OIL BURNERS - SPECIFICATION |
ONORM EN ISO 1403 : 2010
|
RUBBER HOSES, TEXTILE-REINFORCED, FOR GENERAL-PURPOSE WATER APPLICATIONS - SPECIFICATION |
11/30244915 DC : 0
|
BS EN ISO 8029 - PLASTICS HOSE - GENERAL-PURPOSE COLLAPSIBLE WATER HOSE, TEXTILE-REINFORCED - SPECIFICATION |
BS EN ISO 8469:2013
|
Small craft. Non-fire-resistant fuel hoses |
ISO 11759:1999
|
Rubber hoses and hose assemblies for dispensing liquefied petroleum gases (LPGs) — Specification |
DIN EN 1360:2013-09
|
RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION |
UNE-EN 15889:2013
|
Fire-fighting hoses - Test methods |
DD CEN/TS 14421:2006
|
Hose tail and ferrule for crimping and swaging |
03/304727 DC : DRAFT OCT 2003
|
ISO/DIS 8029 - PLASTICS HOSE - GENERAL PURPOSE COLLAPSIBLE WATER HOSE, TEXTILE REINFORCED - SPECIFICATION |
BS ISO 6224 : 1995 AMD 9706
|
PLASTIC HOSES, TEXTILE-REINFORCED, FOR GENERAL-PURPOSE WATER APPLICATIONS - SPECIFICATION |
UNI EN ISO 3821 : 2010
|
GAS WELDING EQUIPMENT - RUBBER HOSES FOR WELDING, CUTTING AND ALLIED PROCESSES |
09/30193685 DC : 0
|
BS ISO 4081 - RUBBER HOSES AND TUBING FOR COOLING SYSTEMS FOR INTERNAL-COMBUSTION ENGINES - SPECIFICATION |
UNE-EN ISO 4641:2017
|
Rubber hoses and hose assemblies for water suction and discharge - Specification (ISO 4641:2016) |
BS EN 15889:2011
|
Fire-fighting hoses. Test methods |
DIN EN ISO 8029:2014-12
|
PLASTICS HOSE - GENERAL-PURPOSE COLLAPSIBLE WATER HOSE, TEXTILE-REINFORCED - SPECIFICATION (ISO 8029:2014) |
BS ISO 4397:2011
|
Fluid power connectors and associated components. Nominal outside diameters of tubes and nominal hose sizes |
BS ISO 4642-2:2015
|
Rubber and plastics hoses, non-collapsible, for fire-fighting service Semi-rigid hoses (and hose assemblies) for pumps and vehicles |
ISO 6804:2016
|
Rubber and plastics inlet hoses and hose assemblies for washing-machines and dishwashers — Specification |
ISO 5359:2014
|
Anaesthetic and respiratory equipment Low-pressure hose assemblies for use with medical gases |
ISO/TR 17784:2003
|
Rubber and plastics hoses and hose assemblies Guide for use by purchasers, assemblers, installers and operating personnel |
CSA Z5359 : 2016
|
ANAESTHETIC AND RESPIRATORY EQUIPMENT - LOW-PRESSURE HOSE ASSEMBLIES FOR USE WITH MEDICAL GASES, MEDICAL VACUUM, MEDICAL SUPPORT GASES, AND ANAESTHETIC GAS SCAVENGING SYSTEMS |
ISO 1403:2005
|
Rubber hoses, textile-reinforced, for general-purpose water applications Specification |
UNI EN ISO 8029 : 2014
|
PLASTICS HOSE - GENERAL-PURPOSE COLLAPSIBLE WATER HOSE, TEXTILE-REINFORCED - SPECIFICATION |
ISO 1823-1:1997
|
Rubber hoses and hose assemblies Part 1: On-shore oil suction and discharge Specification |
ISO/TS 11619:2014
|
Polyurethane tubing for use primarily in pneumatic installations Dimensions and specification |
ISO 8469:2013
|
Small craft Non-fire-resistant fuel hoses |
I.S. EN ISO 4641:2016
|
RUBBER HOSES AND HOSE ASSEMBLIES FOR WATER SUCTION AND DISCHARGE - SPECIFICATION (ISO 4641:2016) |
DIN EN ISO 6808:2014-10
|
PLASTICS HOSES AND HOSE ASSEMBLIES FOR SUCTION AND LOW-PRESSURE DISCHARGE OF PETROLEUM LIQUIDS - SPECIFICATION (ISO 6808:2014) |
DIN EN ISO 14113:2014-02
|
GAS WELDING EQUIPMENT - RUBBER AND PLASTICS HOSE AND HOSE ASSEMBLIES FOR USE WITH INDUSTRIAL GASES UP TO 450 BAR (45 MPA) (ISO 14113:2013) |
DIN EN ISO 3861:2010-04
|
Rubber hoses for sand and grit blasting - Specification (ISO 3861:2005) |
DIN EN 694:2014-10
|
FIRE-FIGHTING HOSES - SEMI-RIGID HOSES FOR FIXED SYSTEMS |
DIN EN ISO 3994:2015-11
|
PLASTICS HOSES - HELICAL-THERMOPLASTIC-REINFORCED THERMOPLASTICS HOSES FOR SUCTION AND DISCHARGE OF AQUEOUS MATERIALS - SPECIFICATION (ISO 3994:2014) |
BS EN 1763-1:2001
|
Rubber and plastics tubing, hoses and assemblies for use with commercial propane, commercial butane and their mixtures in the vapour phase Requirements for rubber and plastics tubing and hoses |
UNE-EN ISO 6808:2015
|
Plastics hoses and hose assemblies for suction and low-pressure discharge of petroleum liquids - Specification (ISO 6808:2014) |
ISO 1401:2016
|
Rubber hoses for agricultural spraying |
ISO 6806:2017
|
Rubber hoses and hose assemblies for use in oil burners — Specification |
BS EN 694:2014
|
Fire-fighting hoses. Semi-rigid hoses for fixed systems |
UNE-EN 1360:2013
|
Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems - Specification |
UNI EN ISO 14113 : 2013
|
GAS WELDING EQUIPMENT - RUBBER AND PLASTICS HOSE AND HOSE ASSEMBLIES FOR USE WITH INDUSTRIAL GASES UP TO 450 BAR (45 MPA) |
UNI EN ISO 5771 : 2009
|
RUBBER HOSES AND HOSE ASSEMBLIES FOR TRANSFERRING ANHYDROUS AMMONIA - SPECIFICATION |
EN ISO 6808:2014
|
Plastics hoses and hose assemblies for suction and low-pressure discharge of petroleum liquids - Specification (ISO 6808:2014) |
EN 1360:2013
|
Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems - Specification |
UNI EN ISO 1403 : 2009
|
RUBBER HOSES, TEXTILE-REINFORCED, FOR GENERAL-PURPOSE WATER APPLICATIONS - SPECIFICATION |
UNI EN ISO 6224 : 2011
|
THERMOPLASTICS HOSES, TEXTILE-REINFORCED, FOR GENERAL-PURPOSE WATER APPLICATIONS - SPECIFICATION |
UNI EN 1947 : 2014
|
FIRE-FIGHTING HOSES - SEMI-RIGID DELIVERY HOSES AND HOSE ASSEMBLIES FOR PUMPS AND VEHICLES |
UNI EN 1360 : 2013
|
RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION |
UNI EN ISO 6808 : 2014
|
PLASTICS HOSES AND HOSE ASSEMBLIES FOR SUCTION AND LOW-PRESSURE DISCHARGE OF PETROLEUM LIQUIDS - SPECIFICATION |
UNI EN ISO 3994 : 2014
|
PLASTICS HOSES - HELICAL-THERMOPLASTIC-REINFORCED THERMOPLASTICS HOSES FOR SUCTION AND DISCHARGE OF AQUEOUS MATERIALS - SPECIFICATION |
UNI EN 14540 : 2014
|
FIRE-FIGHTING HOSES - NON-PERCOLATING LAYFLAT HOSES FOR FIXED SYSTEMS |
UNI EN 13483 : 2013
|
RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES WITH INTERNAL VAPOUR RECOVERY FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION |
05/30128222 DC : DRAFT JAN 2005
|
ISO DIS 5774 - PLASTIC HOSES, TEXTILE REINFORCED, FOR COMPRESSED AIR - SPECIFICATION |
EN ISO 5359:2014/A1:2017
|
ANAESTHETIC AND RESPIRATORY EQUIPMENT - LOW-PRESSURE HOSE ASSEMBLIES FOR USE WITH MEDICAL GASES (ISO 5359:2014/AMD 1:2017) |
UNI EN ISO 8469 : 2013
|
SMALL CRAFT - NON-FIRE-RESISTANT FUEL HOSES |
UNI ISO 4397 : 2012
|
FLUID POWER CONNECTORS AND ASSOCIATED COMPONENTS - NOMINAL OUTSIDE DIAMETERS OF TUBES AND NOMINAL HOSE SIZES |
ISO 3821:2008
|
Gas welding equipment Rubber hoses for welding, cutting and allied processes |
09/30199077 DC : 0
|
BS ISO 4397 - FLUID POWER SYSTEMS AND COMPONENTS - CONNECTORS AND ASSOCIATED COMPONENTS - NOMINAL OUTSIDE DIAMETERS OF TUBES AND NOMINAL HOSE SIZES |
07/30150928 DC : 0
|
BS ISO 5771 - RUBBER HOSE AND HOSE ASSEMBLIES FOR TRANSFERRING ANHYDROUS AMMONIA - SPECIFICATION |
12/30197319 DC : 0
|
BS ISO 11619 - POLYURETHANE TUBING FOR USE PRIMARILY IN PNEUMATIC INSTALLATIONS - DIMENSIONS AND SPECIFICATIONS |
11/30250273 DC : 0
|
BS EN 13483 - RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES WITH INTERNAL VAPOUR RECOVERY FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION |
I.S. EN ISO 8469:2013
|
SMALL CRAFT - NON-FIRE-RESISTANT FUEL HOSES (ISO 8469:2013) |
BS EN 23994:1993
|
Plastics products. Hose of polymer reinforced thermoplastics for suction and discharge |
16/30335326 DC : 0
|
BS ISO 1436 - RUBBER HOSES AND HOSE ASSEMBLIES - WIRE-BRAID-REINFORCED HYDRAULIC TYPES FOR OIL-BASED OR WATER-BASED FLUIDS - SPECIFICATION |
09/30200633 DC : 0
|
BS ISO 4641 - RUBBER HOSES AND HOSE ASSEMBLIES FOR WATER SUCTION AND DISCHARGE - SPECIFICATION |
BS EN ISO 4641:2016
|
Rubber hoses and hose assemblies for water suction and discharge. Specification |
UNI EN 15889 : 2011
|
FIRE-FIGHTING HOSES - TEST METHODS |
03/300797 DC : DRAFT JAN 2003
|
EN 1360 - RUBBER HOSES AND HOSE ASSEMBLIES FOR MEASURED FUEL DISPENSING - SPECIFICATION |
ONORM EN ISO 7840 : 2013
|
SMALL CRAFT - FIRE-RESISTANT FUEL HOSES (ISO 7840:2013) |
I.S. EN ISO 8029:2014
|
PLASTICS HOSE - GENERAL-PURPOSE COLLAPSIBLE WATER HOSE, TEXTILE-REINFORCED - SPECIFICATION (ISO 8029:2014) |
BS EN ISO 3821:2010
|
Gas welding equipment. Rubber hoses for welding, cutting and allied processes |
I.S. EN ISO 7840:2013
|
SMALL CRAFT - FIRE RESISTANT FUEL HOSES (ISO 7840:2013) |
I.S. EN ISO 5359:2014
|
ANAESTHETIC AND RESPIRATORY EQUIPMENT - LOW-PRESSURE HOSE ASSEMBLIES FOR USE WITH MEDICAL GASES (ISO 5359:2014) |
UNI EN ISO 7840 : 2013
|
SMALL CRAFT - FIRE-RESISTANT FUEL HOSES |
UNE-EN ISO 7840:2014
|
Small craft - Fire-resistant fuel hoses (ISO 7840:2013) |
EN ISO 13590:2003/AC:2004
|
SMALL CRAFT - PERSONAL WATERCRAFT - CONSTRUCTION AND SYSTEM INSTALLATION REQUIREMENTS |
ISO 1436:2017
|
Rubber hoses and hose assemblies Wire-braid-reinforced hydraulic types for oil-based or water-based fluids Specification |
I.S. CEN TS 14421:2006
|
HOSE TAIL AND FERRULE FOR CRIMPING AND SWAGING |
DIN EN ISO 6806:2015-08 (Draft)
|
RUBBER HOSES AND HOSE ASSEMBLIES FOR USE IN OIL BURNERS - SPECIFICATION (ISO 6806:2017) |
DIN EN ISO 5771:2009-10
|
RUBBER HOSES AND HOSE ASSEMBLIES FOR TRANSFERRING ANHYDROUS AMMONIA - SPECIFICATION |
BS EN ISO 2398:2016
|
Rubber hoses, textile-reinforced, for compressed air. Specification |
ISO 4641:2016
|
Rubber hoses and hose assemblies for water suction and discharge Specification |
ISO 6224:2011
|
Thermoplastics hoses, textile-reinforced, for general-purpose water applications — Specification |
UNE-EN ISO 6806:2017
|
Rubber hoses and hose assemblies for use in oil burners - Specification (ISO 6806:2017) |
ISO 2398:2016
|
Rubber hoses, textile-reinforced, for compressed air Specification |
UNE-EN ISO 1401:2017
|
Rubber hoses for agricultural spraying (ISO 1401:2016) |
BS EN ISO 6224:2011
|
Thermoplastics hoses, textile-reinforced, for general-purpose water applications. Specification |
UNE-EN ISO 3821:2011
|
Gas welding equipment - Rubber hoses for welding, cutting and allied processes (ISO 3821:2008) |
11/30242646 DC : DRAFT FEB 2011
|
BS EN 62282-2 - FUEL CELL TECHNOLOGIES - PART 2: FUEL CELL MODULES |
BS EN ISO 5771:2008
|
Rubber hoses and hose assemblies for transferring anhydrous ammonia. Specification |
BS EN ISO 6806:2017
|
Rubber hoses and hose assemblies for use in oil burners. Specification |
UNE-EN ISO 14113:2013
|
Gas welding equipment - Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa) (ISO 14113:2013) |
ISO 14113:2013
|
Gas welding equipment — Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa) |
ISO 14557:2002
|
Fire-fighting hoses Rubber and plastics suction hoses and hose assemblies |
ISO 3994:2014
|
Plastics hoses — Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials — Specification |
ISO 6808:2014
|
Plastics hoses and hose assemblies for suction and low-pressure discharge of petroleum liquids — Specification |
ISO 3861:2005
|
Rubber hoses for sand and grit blasting Specification |
IEC 62282-2:2012
|
Fuel cell technologies - Part 2: Fuel cell modules |
ISO 22734-2:2011
|
Hydrogen generators using water electrolysis process Part 2: Residential applications |
BS EN 1360:2013
|
Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems. Specification |
ISO 5771:2008
|
Rubber hoses and hose assemblies for transferring anhydrous ammonia — Specification |
BS EN ISO 3994:2014
|
Plastics hoses. Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials. Specification |
UNE-EN 694:2015
|
Fire-fighting hoses - Semi-rigid hoses for fixed systems |
BS EN 1947:2014
|
Fire-fighting hoses. Semi-rigid delivery hoses and hose assemblies for pumps and vehicles |
UNE-EN 1947:2015
|
Fire-fighting hoses - Semi-rigid delivery hoses and hose assemblies for pumps and vehicles |
UNE-EN 14540:2015
|
Fire-fighting hoses - Non-percolating layflat hoses for fixed systems |
BS EN ISO 1403:2008
|
Rubber hoses, textile-reinforced, for general-purpose water applications. Specification |
UNE-EN ISO 5774:2016
|
Plastics hoses - Textile-reinforced types for compressed-air applications - Specification (ISO 5774:2016) |
09/30150663 DC : 0
|
BS ISO 22734-2 - HYDROGEN GENERATORS USING WATER ELECTROLYSIS PROCESS - PART 2: RESIDENTIAL APPLICATIONS |
BS EN ISO 1401:2016
|
Rubber hoses for agricultural spraying |
BS ISO 22734-2:2011
|
Hydrogen generators using water electrolysis process Residential applications |
BS EN 62282-2:2012
|
Fuel cell technologies Fuel cell modules |
UNE-EN ISO 2398:2017
|
Rubber hoses, textile-reinforced, for compressed air - Specification (ISO 2398:2016) |
UNE-EN 62282-2:2012
|
Fuel cell technologies - Part 2: Fuel cell modules |
EN ISO 3821:2010
|
Gas welding equipment - Rubber hoses for welding, cutting and allied processes (ISO 3821:2008) |
EN 1327:1996
|
Gas welding equipment - Thermoplastic hoses for welding and allied processes |
EN ISO 8029:2014
|
Plastics hose - General-purpose collapsible water hose, textile-reinforced - Specification (ISO 8029:2014) |
EN 14540:2014
|
Fire-fighting hoses - Non-percolating layflat hoses for fixed systems |
EN ISO 6224:2011
|
Thermoplastics hoses, textile-reinforced, for general-purpose water applications - Specification (ISO 6224:2011) |
EN ISO 2398:2016
|
Rubber hoses, textile-reinforced, for compressed air - Specification (ISO 2398:2016) |
EN 559 : 2003
|
GAS WELDING EQUIPMENT - RUBBER HOSES FOR WELDING, CUTTING AND ALLIED PROCESSES |
EN ISO 1403:2008
|
Rubber hoses, textile-reinforced, for general-purpose water applications - Specification (ISO 1403:2005) |
EN 1947:2014
|
Fire-fighting hoses - Semi-rigid delivery hoses and hose assemblies for pumps and vehicles |
EN ISO 5771:2008
|
Rubber hoses and hose assemblies for transferring anhydrous ammonia - Specification (ISO 5771:2008) |
EN 15889:2011
|
Fire-fighting hoses - Test methods |
EN ISO 6806:2017
|
Rubber hoses and hose assemblies for use in oil burners - Specification (ISO 6806:2017) |
EN ISO 3994:2014
|
PLASTICS HOSES - HELICAL-THERMOPLASTIC-REINFORCED THERMOPLASTICS HOSES FOR SUCTION AND DISCHARGE OF AQUEOUS MATERIALS - SPECIFICATION (ISO 3994:2014) |
EN ISO 1401:2016
|
Rubber hoses for agricultural spraying (ISO 1401:2016) |
EN 694:2014
|
Fire-fighting hoses - Semi-rigid hoses for fixed systems |
EN 1763-1 : 2000
|
RUBBER AND PLASTICS TUBING, HOSES AND ASSEMBLIES FOR USE WITH COMMERCIAL PROPANE, COMMERCIAL BUTANE AND THEIR MIXTURES IN THE VAPOUR PHASE - PART 1: REQUIREMENTS FOR RUBBER AND PLASTICS TUBING AND HOSES |
EN 23994 : 1993
|
PLASTICS PRODUCTS - HOSE OF POLYMER REINFORCED THERMOPLASTICS FOR SUCTION AND DISCHARGE |
EN 739:1998/A1:2002
|
LOW-PRESSURE HOSE ASSEMBLIES FOR USE WITH MEDICAL GASES |
EN ISO 5774:2016
|
Plastics hoses - Textile-reinforced types for compressed-air applications - Specification (ISO 5774:2016) |
EN ISO 14113:2013
|
Gas welding equipment - Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa) (ISO 14113:2013) |
EN ISO 4641:2016
|
Rubber hoses and hose assemblies for water suction and discharge - Specification (ISO 4641:2016) |
ISO 7840:2013
|
Small craft Fire-resistant fuel hoses |
DIN EN ISO 4641:2016-07 (Draft)
|
RUBBER HOSES AND HOSE ASSEMBLIES FOR WATER SUCTION AND DISCHARGE - SPECIFICATION (ISO 4641:2016) |
PREN 1360 : DRAFT 2011
|
RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION |
13/30275849 DC : 0
|
BS ISO 5772 - RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION |
11/30250270 DC : 0
|
BS EN 1360 - RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION |
UNE-EN ISO 8029:2014
|
Plastics hose - General-purpose collapsible water hose, textile-reinforced - Specification (ISO 8029:2014) |
15/30317636 DC : 0
|
BS EN ISO 1401 - RUBBER HOSES FOR AGRICULTURAL SPRAYING |
DIN EN 15889 E : 2011
|
FIRE-FIGHTING HOSES - TEST METHODS |
15/30317663 DC : 0
|
BS ISO 11759 - RUBBER HOSES AND HOSE ASSEMBLIES FOR DISPENSING LIQUEFIED PETROLEUM GASES (LPGS) - SPECIFICATION |
08/30178592 DC : DRAFT FEB 2008
|
BS ISO 6804 - RUBBER AND PLASTICS INLET HOSES AND HOSE ASSEMBLIES FOR WASHING-MACHINES AND DISHWASHERS - SPECIFICATION |
ONORM EN ISO 8469 : 2013
|
SMALL CRAFT - NON-FIRE-RESISTANT FUEL HOSES (ISO 8469:2013) |
BS ISO 1403 : 1995 AMD 9703
|
RUBBER HOSES, TEXTILE-REINFORCED, FOR GENERAL-PURPOSE WATER APPLICATIONS - SPECIFICATIONS |
BS EN ISO 7840:2013
|
Small craft. Fire-resistant fuel hoses |
ISO 3862:2017
|
Rubber hoses and hose assemblies Rubber-covered spiral-wire-reinforced hydraulic types for oil-based or water-based fluids Specification |
CSA C22.2 No. 62282-2 :2007
|
FUEL CELL TECHNOLOGIES - PART 2: FUEL CELL MODULES |
EN ISO 7840:2013
|
Small craft - Fire-resistant fuel hoses (ISO 7840:2013) |
DIN EN ISO 8469:2013-12
|
SMALL CRAFT - NON-FIRE-RESISTANT FUEL HOSES (ISO 8469:2013) |
DIN EN ISO 5359:2015-02
|
ANAESTHETIC AND RESPIRATORY EQUIPMENT - LOW-PRESSURE HOSE ASSEMBLIES FOR USE WITH MEDICAL GASES (ISO 5359:2014) |
BS ISO 22734-1:2008
|
Hydrogen generators using water electrolysis process Industrial and commercial applications |
UNE-EN 13483:2013
|
Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensing systems - Specification |
ISO 22734-1:2008
|
Hydrogen generators using water electrolysis process Part 1: Industrial and commercial applications |
BS EN 13483:2013
|
Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensing systems. Specification |
ISO 5774:2016
|
Plastics hoses — Textile-reinforced types for compressed-air applications — Specification |
BS EN ISO 14113:2013
|
Gas welding equipment. Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa) |
BS EN ISO 6808:2014
|
Plastics hoses and hose assemblies for suction and low-pressure discharge of petroleum liquids. Specification |
ISO 8029:2014
|
Plastics hose — General-purpose collapsible water hose, textile-reinforced — Specification |
CEN/TS 14421 : 2006
|
HOSE TAIL AND FERRULE FOR CRIMPING AND SWAGING |
UNE-ISO 22734-1:2012
|
Hydrogen generators using water electrolysis process. Part 1: Industrial and commercial applications |
DIN EN ISO 13590:2004-11
|
SMALL CRAFT - PERSONAL WATERCRAFT - CONSTRUCTION AND SYSTEM INSTALLATION REQUIREMENTS |
DIN EN ISO 6224:2012-02
|
Thermoplastics hoses, textile-reinforced, for general-purpose water applications - Specification (ISO 6224:2011) |
EN 13483:2013
|
Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensing systems - Specification |