BS ISO 13573:2012
|
Corrosion of metals and alloys. Test method for thermal-cycling exposure testing under high-temperature corrosion conditions for metallic materials |
ISO 13573:2012
|
Corrosion of metals and alloys — Test method for thermal-cycling exposure testing under high-temperature corrosion conditions for metallic materials |
BS ISO 12986-1:2014
|
Carbonaceous materials used in the production of aluminium. Prebaked anodes and cathode blocks Determination of bending/shear strength by the three-point method |
DIN EN 16265:2016-05
|
PYROTECHNIC ARTICLES - OTHER PYROTECHNIC ARTICLES - IGNITION DEVICES |
BS EN 16265:2015
|
Pyrotechnic articles. Other pyrotechnic articles. Ignition devices |
ISO 16525-3:2014
|
Adhesives Test methods for isotropic electrically conductive adhesives Part 3: Determination of heat-transfer properties |
BS ISO 21608:2012
|
Corrosion of metals and alloys. Test method for isothermalexposure oxidation testing under high-temperature corrosion conditions for metallic materials |
15/30297751 DC : 0
|
BS ISO 11093-4 - PAPER AND BOARD - TESTING OF CORES - PART 4: MEASUREMENT OF DIMENSIONS |
BS ISO 11093-4:2016
|
Paper and board. Testing of cores Measurement of dimensions |
13/30255566 DC : 0
|
BS ISO 17139 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - CERAMIC COMPOSITES - THERMOPHYSICAL PROPERTIES - DETERMINATION OF THERMAL EXPANSION |
17/30341082 DC : 0
|
BS EN ISO 14978 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS AND REQUIREMENTS FOR GPS MEASURING EQUIPMENT |
I.S. EN ISO 14638:2015
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - MATRIX MODEL (ISO 14638:2015) |
DIN EN 16256-5:2013-03
|
PYROTECHNIC ARTICLES - THEATRICAL PYROTECHNIC ARTICLES - PART 5: TEST METHODS |
BS ISO 26146:2012
|
Corrosion of metals and alloys. Method for metallographic examination of samples after exposure to high-temperature corrosive environments |
12/30192217 DC
|
BS ISO 12856. Plastic railway sleepers (railroad ties) |
DIN EN ISO 16012:2016-02
|
PLASTICS - DETERMINATION OF LINEAR DIMENSIONS OF TEST SPECIMENS (ISO 16012:2015) |
DIN ISO 11093-4:1998-03
|
PAPER AND BOARD - TESTING OF CORES - PART 4: MEASUREMENT OF DIMENSIONS (ISO 11093-4:2016) |
IEC 62326-20:2016
|
Printed boards - Part 20: Printed circuit boards for high-brightness LEDs |
EN ISO 14638:2015
|
Geometrical product specifications (GPS) - Matrix model (ISO 14638:2015) |
ASME B89.1.14 : 2018
|
CALIPERS |
BS ISO 18142:2014
|
Carbonaceous materials for the production of primary aluminium. Baked carbon bodies. Determination of the dynamic elasticity modulus by the resonance method |
UNE-EN 16421:2015
|
Influence of materials on water for human consumption - Enhancement of microbial growth (EMG) |
BS ISO 18535:2016
|
Diamond-like carbon films. Determination of friction and wear characteristics of diamond-like carbon films by ball-on-disc method |
ISO 17224:2015
|
Corrosion of metals and alloys Test method for high temperature corrosion testing of metallic materials by application of a deposit of salt, ash, or other substances |
BS EN 62326-20:2016
|
Printed boards Printed circuit boards for high-brightness LEDs |
18/30364236 DC : 0
|
BS ISO 1835 - ROUND STEEL SHORT LINK CHAINS FOR LIFTING PURPOSES - MEDIUM TOLERANCE SLING CHAINS - GRADE 4, STAINLESS STEEL |
DIN EN 16264:2014-11
|
PYROTECHNIC ARTICLES - OTHER PYROTECHNIC ARTICLES - CARTRIDGES FOR POWDER ACTUATED TOOLS |
BS ISO 12986-2:2014
|
Carbonaceous materials used in the production of aluminium. Prebaked anodes and cathode blocks Determination of flexural strength by the four-point method |
I.S. EN 16421:2014
|
INFLUENCE OF MATERIALS ON WATER FOR HUMAN CONSUMPTION - ENHANCEMENT OF MICROBIAL GROWTH (EMG) |
I.S. EN ISO 16012:2015
|
PLASTICS - DETERMINATION OF LINEAR DIMENSIONS OF TEST SPECIMENS |
ISO 12856-1:2014
|
Plastics Plastic railway sleepers for railway applications (railroad ties) Part 1: Material characteristics |
UNE-EN 16264:2015
|
Pyrotechnic articles - Other pyrotechnic articles - Cartridges for powder actuated tools |
ISO 16525-6:2014
|
Adhesives Test methods for isotropic electrically conductive adhesives Part 6: Determination of pendulum-type shear impact |
I.S. EN 16264:2014
|
PYROTECHNIC ARTICLES - OTHER PYROTECHNIC ARTICLES - CARTRIDGES FOR POWDER ACTUATED TOOLS |
I.S. EN 62326-20:2016
|
PRINTED BOARDS - PART 20: PRINTED CIRCUIT BOARDS FOR HIGHBRIGHTNESS LEDS |
BS EN 15947-4 : 2016
|
PYROTECHNIC ARTICLES - FIREWORKS, CATEGORIES F1, F2 AND F3 - PART 4: TEST METHODS |
BS ISO 19828:2017
|
Welding for aerospace applications. Visual inspection of welds |
DIN EN 16263-4:2015-11
|
PYROTECHNIC ARTICLES - OTHER PYROTECHNIC ARTICLES - PART 4: TEST METHODS |
ISO 18754:2013
|
Fine ceramics (advanced ceramics, advanced technical ceramics) Determination of density and apparent porosity |
BS ISO 17224:2015
|
Corrosion of metals and alloys. Test method for high temperature corrosion testing of metallic materials by application of a deposit of salt, ash, or other substances |
BS EN 16421:2014
|
Influence of materials on water for human consumption. Enhancement of microbial growth (EMG) |
I.S. EN 16265:2015
|
PYROTECHNIC ARTICLES - OTHER PYROTECHNIC ARTICLES - IGNITION DEVICES |
ISO 21608:2012
|
Corrosion of metals and alloys — Test method for isothermal-exposure oxidation testing under high-temperature corrosion conditions for metallic materials |
BS ISO 18515:2014
|
Carbonaceous materials for the production of aluminium. Cathode blocks and baked anodes. Determination of compressive strength |
UNE-EN ISO 16012:2016
|
Plastics - Determination of linear dimensions of test specimens (ISO 16012:2015) |
DIN EN ISO 16012 E : 2016
|
PLASTICS - DETERMINATION OF LINEAR DIMENSIONS OF TEST SPECIMENS (ISO 16012:2015) |
BS EN 16264:2014
|
Pyrotechnic articles. Other pyrotechnic articles. Cartridges for powder actuated tools |
BS ISO 18899:2013
|
Rubber. Guide to the calibration of test equipment |
ISO 26146:2012
|
Corrosion of metals and alloys Method for metallographic examination of samples after exposure to high-temperature corrosive environments |
ISO 17139:2014
|
Fine ceramics (advanced ceramics, advanced technical ceramics) Thermophysical properties of ceramic composites Determination of thermal expansion |
DIN EN 15947-4:2016-02
|
Pyrotechnic articles - Fireworks, Categories F1, F2 and F3 - Part 4: Test methods |
ISO 10406-1:2015
|
Fibre-reinforced polymer (FRP) reinforcement of concrete — Test methods — Part 1: FRP bars and grids |
PREN 993-5 : DRAFT 2017
|
METHODS OF TEST FOR DENSE SHAPED REFRACTORY PRODUCTS - PART 5: DETERMINATION OF COLD CRUSHING STRENGTH |
ISO 23529:2016
|
Rubber General procedures for preparing and conditioning test pieces for physical test methods |
ISO 18515:2014
|
Carbonaceous materials for the production of aluminium Cathode blocks and baked anodes Determination of compressive strength |
13/30279113 DC : 0
|
BS ISO 16012 - PLASTICS - DETERMINATION OF LINEAR DIMENSIONS OF TEST SPECIMENS |
11/30210860 DC : DRAFT SEP 2011
|
BS ISO 26146 - CORROSION OF METALS AND ALLOYS - METHOD FOR METALLOGRAPHIC EXAMINATION OF SAMPLES AFTER EXPOSURE TO HIGH-TEMPERATURE CORROSIVE ENVIRONMENTS |
BS ISO 23529:2016
|
Rubber. General procedures for preparing and conditioning test pieces for physical test methods |
ISO 19828:2017
|
Welding for aerospace applications — Visual inspection of welds |
BS ISO 17139:2014
|
Fine ceramics (advanced ceramics, advanced technical ceramics). Thermophysical properties of ceramic composites. Determination of thermal expansion |
DIN EN 16421 E : 2015
|
INFLUENCE OF MATERIALS ON WATER FOR HUMAN CONSUMPTION - ENHANCEMENT OF MICROBIAL GROWTH (EMG) |
UNE-EN 15947-4:2016
|
Pyrotechnic articles - Fireworks, Categories F1, F2 and F3 - Part 4: Test methods |
UNE-EN 16265:2016
|
Pyrotechnic articles - Other pyrotechnic articles - Ignition devices |
BS EN ISO 14638:2015
|
Geometrical product specifications (GPS). Matrix model |
16/30334927 DC : 0
|
BS ISO 23529 - RUBBER - GENERAL PROCEDURES FOR PREPARING AND CONDITIONING TEST PIECES FOR PHYSICAL TEST METHODS |
ISO 17841:2015
|
Fine ceramics (advanced ceramics, advanced technical ceramics) Test method for thermal fatigue of fine ceramics substrate |
ISO 18142:2014
|
Carbonaceous materials for the production of primary aluminium — Baked carbon bodies — Determination of the dynamic elasticity modulus by the resonance method |
BS ISO 17841:2015
|
Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for thermal fatigue of fine ceramics substrate |
ISO 12986-1:2014
|
Carbonaceous materials used in the production of aluminium Prebaked anodes and cathode blocks Part 1: Determination of bending/shear strength by the three-point method |
I.S. EN 16256-5:2012
|
PYROTECHNIC ARTICLES - THEATRICAL PYROTECHNIC ARTICLES - PART 5: TEST METHODS |
I.S. EN 15947-4:2015
|
PYROTECHNIC ARTICLES - FIREWORKS, CATEGORIES F1, F2 AND F3 - PART 4: TEST METHODS |
ISO 12986-2:2014
|
Carbonaceous materials used in the production of aluminium Prebaked anodes and cathode blocks Part 2: Determination of flexural strength by the four-point method |
ISO 18899:2013
|
Rubber — Guide to the calibration of test equipment |
ISO 14610:2012
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for flexural strength of porous ceramics at room temperature |
ISO 17562:2016
|
Fine ceramics (advanced ceramics, advanced technical ceramics) Test method for linear thermal expansion of monolithic ceramics by push-rod technique |
16/30337634 DC : DRAFT APR 2016
|
BS ISO 19828 - WELDING FOR AEROSPACE APPLICATIONS - VISUAL INSPECTION OF WELDS |
ISO 14638:2015
|
Geometrical product specifications (GPS) Matrix model |
EN 16421:2014
|
Influence of materials on water for human consumption - Enhancement of microbial growth (EMG) |
EN 15947-4:2015
|
Pyrotechnic articles - Fireworks, Categories F1, F2 and F3 - Part 4: Test methods |
EN ISO 16012:2015
|
Plastics - Determination of linear dimensions of test specimens (ISO 16012:2015) |
EN 16265:2015
|
Pyrotechnic articles - Other pyrotechnic articles - Ignition devices |
EN 16256-5:2012
|
Pyrotechnic articles - Theatrical pyrotechnic articles - Part 5: Test methods |
EN 16263-4:2015
|
Pyrotechnic articles - Other pyrotechnic articles - Part 4: Test methods |
ISO 18535:2016
|
Diamond-like carbon films Determination of friction and wear characteristics of diamond-like carbon films by ball-on-disc method |
BS EN 16256-5:2012
|
Pyrotechnic articles. Theatrical pyrotechnic articles Test methods |
UNI EN 16264 : 2014
|
PYROTECHNIC ARTICLES - OTHER PYROTECHNIC ARTICLES - CARTRIDGES FOR POWDER ACTUATED TOOLS |
UNE-EN 16256-5:2013
|
Pyrotechnic articles - Theatrical pyrotechnic articles - Part 5: Test methods |
BS EN 16263-4:2015
|
Pyrotechnic articles. Other pyrotechnic articles Test methods |
BS ISO 16525-6:2014
|
Adhesives. Test methods for isotropic electrically conductive adhesives Determination of pendulum-type shear impact |
BS ISO 16525-3:2014
|
Adhesives. Test methods for isotropic electrically conductive adhesives Determination of heat-transfer properties |
11/30210857 DC : 0
|
BS ISO 13573 - CORROSION OF METALS AND ALLOYS - TEST METHOD FOR THERMAL-CYCLING EXPOSURE TESTING UNDER HIGH-TEMPERATURE CORROSION CONDITIONS FOR METALLIC MATERIALS |
ISO 11093-4:2016
|
Paper and board Testing of cores Part 4: Measurement of dimensions |
BS EN ISO 16012:2015
|
Plastics. Determination of linear dimensions of test specimens |
BS ISO 14610:2012
|
Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for flexural strength of porous ceramics at room temperature |
11/30218320 DC : 0
|
BS ISO 18754 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - DETERMINATION OF DENSITY AND APPARENT POROSITY |
DIN EN 16421:2015-05
|
INFLUENCE OF MATERIALS ON WATER FOR HUMAN CONSUMPTION - ENHANCEMENT OF MICROBIAL GROWTH (EMG) |
ISO 26261-3:2017
|
Fireworks — Category 4 — Part 3: Test methods |
UNE-EN 16263-4:2016
|
Pyrotechnics articles - Other pyrotechnic articles - Part 4: Test methods |
UNI EN 16421 : 2015
|
INFLUENCE OF MATERIALS ON WATER FOR HUMAN CONSUMPTION - ENHANCEMENT OF MICROBIAL GROWTH (EMG) |
I.S. EN 16263-4:2015
|
PYROTECHNIC ARTICLES - OTHER PYROTECHNIC ARTICLES - PART 4: TEST METHODS |
17/30357410 DC : 0
|
BS EN 993-5 - METHODS OF TEST FOR DENSE SHAPED REFRACTORY PRODUCTS - PART 5: DETERMINATION OF COLD CRUSHING STRENGTH |
ISO 16012:2015
|
Plastics Determination of linear dimensions of test specimens |
EN 62326-20:2016
|
Printed boards - Part 20: Printed circuit boards for high-brightness LEDs |
ASME B89.1.14:2018(R2023)
|
Calipers |