Skip to content
Please enter a keyword to search

  • ISO 14253-1:2017

    Current The latest, up-to-date edition.

    Geometrical product specifications (GPS) — Inspection by measurement of workpieces and measuring equipment — Part 1: Decision rules for verifying conformity or nonconformity with specifications

    Available format(s):  Hardcopy, PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

    Language(s):  French, English

    Published date:  31-10-2017

    Publisher:  International Organization for Standardization

    Add To Cart

    Abstract - (Show below) - (Hide below)

    ISO 14253-1:2017 establishes the rules for verifying the conformity or nonconformity with a given tolerance for a characteristic of a workpiece (or a population of workpieces) or with a given maximum permissible errors for a metrological characteristic of a measuring equipment, including when the measured value falls close to the specification limits, taking measurement uncertainty into account.

    ISO 14253-1:2017 applies to specifications defined in general GPS standards (see ISO 14638), i.e. standards prepared by ISO/TC 213, including:

    - workpiece specifications and population specifications (usually given as an upper specification limit or a lower specification limit or both);

    - measuring equipment specifications (usually given as maximum permissible errors).

    ISO 14253-1:2017 only applies for characteristics and maximum permissible errors expressed as quantity values.

    General Product Information - (Show below) - (Hide below)

    Committee ISO/TC 213
    Development Note Supersedes ISO/DIS 14253-1. (11/2017)
    Document Type Standard
    Publisher International Organization for Standardization
    Status Current
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    DIN 874-1:2003-11 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - STRAIGHT EDGES - PART 1: STEEL STRAIGHT EDGES - DIMENSIONS, TECHNICAL DELIVERY CONDITIONS
    DIN EN ISO 16610-1 E : 2015 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 1: OVERVIEW AND BASIC CONCEPTS (ISO 16610-1:2015)
    PD CEN/TR 15235:2005 Welding. Methods for assessing imperfections in metallic structures
    DIN EN ISO 16610-85:2013-05 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 85: MORPHOLOGICAL AREAL FILTERS: SEGMENTATION (ISO 16610-85:2013)
    UNE-EN ISO 10360-8:2017 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 8: CMMs with optical distance sensors (ISO 10360-8:2013)
    I.S. EN ISO 25178-3:2012 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 3: SPECIFICATION OPERATORS (ISO 25178-3:2012)
    UNI EN ISO 10360-8 : 2014 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING SYSTEMS (CMS) - PART 8: CMMS WITH OPTICAL DISTANCE SENSORS
    UNI EN ISO 12781-2 : 2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FLATNESS - PART 2: SPECIFICATION OPERATORS
    BS EN ISO 2538-2:2014 Geometrical product specifications (GPS). Wedges Dimensioning and tolerancing
    14/30272942 DC : 0 BS EN ISO 18391 - GEOMETRICAL PRODUCT SPECIFICATION (GPS) - POPULATION SPECIFICATION
    ISO 17450-4:2017 Geometrical product specifications (GPS) — Basic concepts — Part 4: Geometrical characteristics for quantifying GPS deviations
    BS EN ISO 14253-2:2011 Geometrical product specifications (GPS). Inspection by measurement of workpieces and measuring equipment Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification
    DIN EN ISO 16610-21:2013-06 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 21: LINEAR PROFILE FILTERS: GAUSSIAN FILTERS (ISO 16610-21:2011)
    08/30176399 DC : DRAFT JAN 2008 BS ISO 26303-1 - MACHINE TOOLS - RELIABILITY, AVAILABILITY AND CAPABILITY - PART 1: CAPABILITY EVALUATION OF MACHINING PROCESSES ON METAL-CUTTING MACHINE TOOLS
    BS EN ISO 12780-1:2011 Geometrical product specifications (GPS). Straightness Vocabulary and parameters of straightness
    OIML G 1-106 : 2012 EVALUATION OF MEASUREMENT DATA - THE ROLE OF MEASUREMENT UNCERTAINTY IN CONFORMITY ASSESSMENT
    BS EN ISO 12781-2:2011 Geometrical product specifications (GPS). Flatness Specification operators
    08/30192855 DC : 0 BS ISO 5-4 - PHOTOGRAPHY AND GRAPHIC TECHNOLOGY - SPECTRAL DENSITY MEASUREMENTS - PART 4: GEOMETRIC CONDITIONS FOR REFLECTION DENSITY
    BS EN ISO 25178-604:2013 Geometrical product specifications (GPS). Surface texture: Areal Nominal characteristics of non-contact (coherence scanning interferometry) instruments
    BS EN ISO 12780-2:2011 Geometrical product specifications (GPS). Straightness Specification operators
    BS EN ISO 3040:2016 Geometrical product specifications (GPS). Dimensioning and tolerancing. Cones
    BS EN ISO 10360-10:2016 Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring systems (CMS) Laser trackers for measuring point-to-point distances
    I.S. EN ISO 16610-71:2014 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 71: ROBUST AREAL FILTERS: GAUSSIAN REGRESSION FILTERS (ISO 16610-71:2014)
    UNE-EN ISO 12781-2:2012 Geometrical product specifications (GPS) - Flatness - Part 2: Specification operators (ISO 12781-2:2011)
    09/30198186 DC : 0 BS EN ISO 13102 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT: ELECTRONIC DIGITAL INDICATOR - DESIGN AND METROLOGICAL CHARACTERISTICS
    CSA Z10535.1 : 2015 HOISTS FOR THE TRANSFER OF DISABLED PERSONS - REQUIREMENTS AND TEST METHODS
    BS EN ISO 10360-7:2011 Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM) CMMs equipped with imaging probing systems
    UNI CEN ISO/TS 14253-3 : 2008 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENT - PART 3: GUIDELINES FOR ACHIEVING AGREEMENTS ON MEASUREMENT UNCERTAINTY STATEMENTS
    PREN ISO 12780-2 : DRAFT 2009 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - STRAIGHTNESS - PART 2: SPECIFICATION OPERATORS
    UNI EN ISO 12780-2 : 2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - STRAIGHTNESS - PART 2: SPECIFICATION OPERATORS
    DIN 863-1:2016-07 (Draft) GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - MICROMETERS - PART 1: MICROMETERS FOR EXTERNAL MEASUREMENTS; MAXIMUM PERMISSIBLE ERRORS
    DD CEN ISO/TS 12780-2:2007 Geometrical product specifications (GPS). Straightness Specification operators
    17/30341082 DC : 0 BS EN ISO 14978 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS AND REQUIREMENTS FOR GPS MEASURING EQUIPMENT
    BS EN ISO 25178-3:2012 Geometrical product specifications (GPS). Surface texture: Areal Specification operators
    PD CEN ISO/TS 15530-1:2013 Geometrical product specifications (GPS). Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement Overview and metrological characteristics
    DD ENV ISO 14253-2:2001 Geometrical product specifications (GPS). Inspection by measurement of workpieces and measuring equipments Guide to the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification
    11/30229116 DC : 0 BS ISO 1328-1 - CYLINDRICAL GEARS - ISO SYSTEM OF TOLERANCE CLASSIFICATION - PART 1: DEFINITIONS AND ALLOWABLE VALUES OF DEVIATIONS RELEVANT TO CORRESPONDING FLANKS OF GEAR TEETH
    DIN EN ISO 14405-3 E : 2017 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 3: ANGULAR SIZES (ISO 14405-3:2016)
    DIN EN ISO 12180-1:2011-07 Geometrical product specifications (GPS) - Cylindricity - Part 1: Vocabulary and parameters of cylindrical form (ISO 12180-1:2011)
    BS EN ISO 9493:2010 Geometrical product specifications (GPS). Dimensional measuring equipment: Dial test indicators (lever type). Design and metrological characteristics
    BS EN ISO 14253-3:2011 Geometrical product specifications (GPS). Inspection by measurement of workpieces and measuring equipment Guidelines for achieving agreements on measurement uncertainty statements
    DIN EN ISO 12780-1:2014-04 Geometrical product specifications (GPS) - Straightness - Part 1: Vocabulary and parameters of straightness (ISO 12780-1:2011)
    16/30339565 DC : 0 BS ISO 12297-2 - ROLLING BEARINGS - CYLINDRICAL ROLLERS - PART 2: CERAMIC ROLLERS - BOUNDARY DIMENSIONS, GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) AND TOLERANCE VALUES
    I.S. EN ISO 1938-2:2017 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 2: REFERENCE DISK GAUGES (ISO 1938-2:2017)
    02/707905 DC : DRAFT JUN 2002 ISO/DIS 18653 - GEARS - EVALUATION OF INSTRUMENTS FOR THE MEASUREMENT OF GEARS
    BS EN ISO 3611:2010 Geometrical product specifications (GPS). Dimensional measuring equipment: Micrometers for external measurements. Design and metrological characteristics
    I.S. EN ISO 17450-2:2012 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS - PART 2: BASIC TENETS, SPECIFICATIONS, OPERATORS, UNCERTAINTIES AND AMBIGUITIES (ISO 17450-2:2012)
    UNE-EN ISO 3040:2016 Geometrical product specifications (GPS) - Dimensioning and tolerancing - Cones (ISO 3040:2016)
    09/30198149 DC : DRAFT MAY 2009 BS EN ISO 12180-2 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - CYLINDRICITY - PART 2: SPECIFICATION OPERATORS
    BS EN ISO 17450-3:2016 Geometrical product specifications (GPS). General concepts Toleranced features
    UNE-EN ISO 17450-2:2015 Geometrical product specifications (GPS) - General concepts - Part 2: Basic tenets, specifications, operators, uncertainties and ambiguities (ISO 17450-2:2012)
    I.S. EN ISO 15530-3:2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - COORDINATE MEASURING MACHINES (CMM): TECHNIQUE FOR DETERMINING THE UNCERTAINTY OF MEASUREMENT - PART 3: USE OF CALIBRATED WORKPIECES OR MEASUREMENT STANDARDS (ISO 15530-3:2011)
    DD CEN ISO/TS 14253-3:2007 Geometrical product specifications (GPS). Inspection by measurement of workpieces and measuring equipment Guidelines for achieving agreements on measurement uncertainty statements
    08/30169333 DC : DRAFT MAR 2008 BS ISO 13225-1 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING INSTRUMENTS; HEIGHT GAUGES - PART 1: SIMPLE HEIGHT GAUGES; DESIGN AND METROLOGICAL CHARACTERISTICS
    I.S. CEN/TR 15235:2005 WELDING - METHODS FOR ASSESSING IMPERFECTIONS IN METALLIC STRUCTURES
    ISO/TR 16015:2003 Geometrical product specifications (GPS) — Systematic errors and contributions to measurement uncertainty of length measurement due to thermal influences
    I.S. EN ISO 17450-4:2018 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - BASIC CONCEPTS - PART 4: GEOMETRICAL CHARACTERISTICS FOR QUANTIFYING GPS DEVIATIONS (ISO 17450-4:2017)
    ISO 5-4:2009 Photography and graphic technology Density measurements Part 4: Geometric conditions for reflection density
    ISO 230-1:2012 Test code for machine tools — Part 1: Geometric accuracy of machines operating under no-load or quasi-static conditions
    I.S. EN ISO 14405-2:2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 2: DIMENSIONS OTHER THAN LINEAR SIZES (ISO 14405-2:2011)
    ISO 10360-12:2016 Geometrical product specifications (GPS) Acceptance and reverification tests for coordinate measuring systems (CMS) Part 12: Articulated arm coordinate measurement machines (CMM)
    UNI EN ISO 14253-3 : 2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENT - PART 3: GUIDELINES FOR ACHIEVING AGREEMENTS ON MEASUREMENT UNCERTAINTY STATEMENTS
    UNI EN ISO 25178-3 : 2012 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 3: SPECIFICATION OPERATORS
    ISO 5393:2017 Rotary tools for threaded fasteners — Performance test method
    I.S. EN ISO 3040:2016 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONING AND TOLERANCING - CONES (ISO 3040:2016)
    I.S. EN ISO 17450-3:2016 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS PART 3: TOLERANCED FEATURES (ISO 17450-3:2016)
    UNE-EN ISO 2538-2:2015 Geometrical product specifications (GPS) - Wedges - Part 2: Dimensioning and tolerancing (ISO 2538-2:2014)
    UNE-EN ISO 12181-1:2012 Geometrical product specifications (GPS) - Roundness - Part 1: Vocabulary and parameters of roundness (ISO/FDIS 12181-1:2010)
    UNI EN ISO 12180-1 : 2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - CYLINDRICITY - PART 1: VOCABULARY AND PARAMETERS OF CYLINDRICAL FORM
    UNI EN ISO 10360-7 : 2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING MACHINES (CMM) - PART 7: CMMS EQUIPPED WITH IMAGING PROBING SYSTEMS
    UNI EN ISO 17450-2 : 2012 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS - PART 2: BASIC TENETS, SPECIFICATIONS, OPERATORS, UNCERTAINTIES AND AMBIGUITIES
    I.S. EN ISO 10360-9:2013 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING SYSTEMS (CMS) - PART 9: CMMS WITH MULTIPLE PROBING SYSTEMS (ISO 10360-9:2013)
    I.S. EN ISO 25178-1:2016 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 1: INDICATION OF SURFACE TEXTURE (ISO 25178-1:2016)
    UNE-EN ISO 14405-2:2015 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear sizes (ISO 14405-2:2011)
    ISO 14978:2006 Geometrical product specifications (GPS) General concepts and requirements for GPS measuring equipment
    NF EN ISO 10360-5 : 2010 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING MACHINES (CMM) - PART 5: CMMS USING SINGLE AND MULTIPLE STYLUS CONTACTING PROBING SYSTEMS
    DIN EN ISO 11137-3:2015-08 (Draft) STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 3: GUIDANCE ON DOSIMETRIC ASPECTS OF DEVELOPMENT, VALIDATION AND ROUTINE CONTROL (ISO 11137-3:2017)
    ISO/TS 14253-4:2010 Geometrical product specifications (GPS) — Inspection by measurement of workpieces and measuring equipment — Part 4: Background on functional limits and specification limits in decision rules
    BS EN ISO 1302:2002 Geometrical product specifications (GPS). Indication of surface texture in technical product documentation
    BS EN 12464-1:2011 Light and lighting. Lighting of work places Indoor work places
    UNE-EN ISO 11608-1:2015 Needle-based injection systems for medical use - Requirements and test methods - Part 1: Needle-based injection systems (ISO 11608-1:2014)
    DIN EN ISO 463 : 2009-07 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - DESIGN AND METROLOGICAL CHARACTERISTICS OF MECHANICAL DIAL GAUGES
    BS EN ISO 2692:2014 Geometrical product specifications (GPS). Geometrical tolerancing. Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR)
    ISO 25178-72:2017 Geometrical product specifications (GPS) Surface texture: Areal Part 72: XML file format x3p
    I.S. EN ISO 11608-1:2015 NEEDLE-BASED INJECTION SYSTEMS FOR MEDICAL USE - REQUIREMENTS AND TEST METHODS - PART 1: NEEDLE-BASED INJECTION SYSTEMS (ISO 11608-1:2014)
    I.S. EN ISO 10535:2006 HOISTS FOR THE TRANSFER OF DISABLED PERSONS - REQUIREMENTS AND TEST METHODS
    I.S. EN ISO 10360-4:2000 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING MACHINES (CMM) - PART 4: CMMS USED IN SCANNING MEASURING MODE
    EN ISO 12780-2:2011 Geometrical product specifications (GPS) - Straightness - Part 2: Specification operators (ISO 12780-2:2011)
    CEN ISO/TS 12181-2:2007 Geometrical product specifications (GPS) - Roundness - Part 2: Specification operators (ISO/TS 12181-2:2003)
    CEN ISO/TS 12180-2:2007 Geometrical product specifications (GPS) - Cylindricity - Part 2: Specification operators (ISO/TS 12180-2:2003)
    EN ISO 12181-1 : 2011 Geometrical product specifications (GPS) - Roundness - Part 1: Vocabulary and parameters of roundness (ISO 12181-1:2011)
    CEN ISO/TS 12781-2:2007 Geometrical product specifications (GPS) - Flatness - Part 2: Specification operators (ISO/TS 12781-2:2003)
    DIN EN ISO 139:2011-10 Textiles - Standard atmospheres for conditioning and testing (ISO 139:2005 + Amd.1:2011)
    EN ISO 12179:2000/AC:2008 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - CALIBRATION OF CONTACT (STYLUS) INSTRUMENTS
    EN ISO 14253-3:2011 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 3: Guidelines for achieving agreements on measurement uncertainty statements (ISO 14253-3:2011)
    EN ISO 14638:2015 Geometrical product specifications (GPS) - Matrix model (ISO 14638:2015)
    EN ISO 13102:2012 Geometrical product specifications (GPS) - Dimensional measuring equipment: Electronic digital-indicator gauge - Design and metrological characteristics (ISO 13102:2012)
    EN ISO 12780-1:2011 Geometrical product specifications (GPS) - Straightness - Part 1: Vocabulary and parameters of straightness (ISO 12780-1:2011)
    DIN EN ISO 21649:2010-01 Needle-free injectors for medical use - Requirements and test methods (ISO 21649:2006)
    DIN 863-1:1999-04 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - MICROMETERS - PART 1: MICROMETERS FOR EXTERNAL MEASUREMENTS; MAXIMUM PERMISSIBLE ERRORS
    DIN EN ISO 1101:2017-09 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - TOLERANCES OF FORM, ORIENTATION, LOCATION AND RUN-OUT (ISO 1101:2017)
    CEN ISO/TS 14253-4:2010 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 4: Background on functional limits and specification limits in decision rules (ISO/TS 14253-4:2010)
    I.S. EN ISO 1302:2002 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INDICATION OF SURFACE TEXTURE IN TECHNICAL PRODUCT DOCUMENTATION
    EN 1071-1 : 2003 ADVANCED TECHNICAL CERAMICS - METHODS OF TEST FOR CERAMIC COATINGS - PART 1: DETERMINATION OF COATING THICKNESS BY CONTACT PROBE FILOMETER
    CEN ISO/TS 12780-2:2007 Geometrical product specifications (GPS) - Straightness - Part 2: Specification operators (ISO/TS 12780-2:2003)
    MIL-PRF-50884 Revision F:2014 Printed Wiring Board, Flexible or Rigid-Flex, General Specification for
    MIL P 50884 : E PRINTED WIRING BOARD, FLEXIBLE OR RIGID-FLEX, GENERAL SPECIFICATION FOR
    MIL-PRF-55110 Revision H:2014 Printed Wiring Board, Rigid, General Specification for
    NF EN ISO 21649 : 2009 NEEDLE-FREE INJECTORS FOR MEDICAL USE - REQUIREMENTS AND TEST METHODS
    VDI/VDE 2617 Blatt 6.1:2007-05 Accuracy of coordinate measuring machines - Characteristics and their testing - Coordinate measuring machines with optical probing - Code of practice for the application of DIN EN ISO 10360 to coordinate measuring machines with optical sensors for lateral structures
    ONORM EN ISO 3611 : 2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT: MICROMETERS FOR EXTERNAL MEASUREMENTS - DESIGN AND METROLOGICAL CHARACTERISTICS
    NBR ISO 18669-2 : 2010 ERRATA 1 2012 INTERNAL COMBUSTION ENGINES - PISTON PINS - PART 2: INSPECTION MEASURING PRINCIPLES
    VDI/VDE 2617 Blatt 4:2006-05 Accuracy of coordinate measuring machines - Characteristics and their checking - Manual for the use of DIN EN ISO 10360-3 for coordinate measuring machines with additional axes of rotation
    ONORM EN ISO 11608-1 : 2015 NEEDLE-BASED INJECTION SYSTEMS FOR MEDICAL USE - REQUIREMENTS AND TEST METHODS - PART 1: NEEDLE-BASED INJECTION SYSTEMS (ISO 11608-1:2014)
    AGMA ISO 18653 : A GEARS - EVALUATION OF INSTRUMENTS FOR THE MEASUREMENT OF INDIVIDUAL GEARS
    08/30181977 DC : DRAFT MAY 2008 BS EN ISO 9493 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT: DIAL TEST INDICATORS (LEVER TYPE) - DESIGN AND METROLOGICAL REQUIREMENTS
    ISO/PAS 12868:2009 Geometrical product specification (GPS) Coordinate measuring machines (CMM): Testing the performance of CMMs using single-stylus contacting probing systems
    PD ISO/TS 17863:2013 Geometrical product specification (GPS). Geometrical tolerancing of moveable assemblies
    UNE-EN ISO 11608-5:2013 Needle-based injection systems for medical use - Requirements and test methods - Part 5: Automated functions (ISO 11608-5:2012)
    UNE-EN ISO 10360-7:2012 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 7: CMMs equipped with imaging probing systems (ISO 10360-7:2011)
    BS EN ISO 13225:2012 Geometrical product specifications (GPS). Dimensional measuring equipment; Height gauges. Design and metrological characteristics
    UNE-EN ISO 13385-2:2012 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Calliper depth gauges; Design and metrological characteristics (ISO 13385-2:2011)
    I.S. EN ISO 10360-8:2013 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING SYSTEMS (CMS) - PART 8: CMMS WITH OPTICAL DISTANCE SENSORS (ISO 10360-8:2013)
    DIN EN ISO 2538-2:2015-01 Geometrical product specifications (GPS) - Wedges - Part 2: Dimensioning and tolerancing (ISO 2538-2:2014)
    DIN EN ISO 2538-1 E : 2015 GEOMETRICAL PRODUCT SPECFICATIONS (GPS) - WEDGES - PART 1: SERIES OF ANGLES AND SLOPES (ISO 2538-1:2014)
    ISO/TR 10064-5:2005 Code of inspection practice Part 5: Recommendations relative to evaluation of gear measuring instruments
    DIN EN ISO 1938-1:2016-03 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Plain limit gauges of linear size (ISO 1938-1:2015)
    15/30295114 DC : 0 BS EN ISO 25178-71 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 71: SOFTWARE MEASUREMENT STANDARDS
    UNI EN ISO 12181-2 : 2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ROUNDNESS - PART 2: SPECIFICATION OPERATORS
    12/30259670 DC : 0 BS ISO/IEC GUIDE 98-4.2 - UNCERTAINTY OF MEASUREMENT - PART 4: ROLE OF MEASUREMENT UNCERTAINTY IN CONFORMITY ASSESSMENT
    14/30272936 DC : 0 BS EN ISO 17450-3 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS - PART 3: TOLERANCED FEATURES
    15/30282559 DC : 0 BS EN ISO 11137-3 - STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 3: GUIDANCE ON DOSIMETRIC ASPECTS OF DEVELOPMENT, VALIDATION AND ROUTINE CONTROL
    ISO/TR 10064-1:2017 Code of inspection practice Part 1: Measurement of cylindrical gear tooth flanks
    DIN EN ISO 11608-5:2013-01 Needle-based injection systems for medical use - Requirements and test methods - Part 5: Automated functions (ISO 11608-5:2012)
    DIN CEN ISO/TS 8062-2;DIN SPEC 91184:2014-03 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES (ISO/TS 8062-2:2013)
    07/19984917 DC : 0 BS ISO 14659 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FUNDAMENTALS - CONCEPTS, PRINCIPLES AND RULES
    BS EN ISO 25178-72:2017 Geometrical product specifications (GPS). Surface texture: Areal XML file format x3p
    DIN EN ISO 8015:2011-09 Geometrical product specifications (GPS) - Fundamentals - Concepts, principles and rules (ISO 8015:2011)
    BS EN ISO 13385-2:2011 Geometrical product specifications (GPS). Dimensional measuring equipment Calliper depth gauges. Design and metrological characteristics
    96/704404 DC : 0 ISO/DIS 9121 - GEOMETRICAL PRODUCT SPECIFICATION (GPS) - DIMENSIONAL MEASURING INSTRUMENTS - INTERNAL MICROMETERS WITH TWO-POINT CONTACT - DESIGN AND METROLOGICAL REQUIREMENTS
    BS ISO 8062-4:2017 Geometrical product specifications (GPS). Dimensional and geometrical tolerances for moulded parts General tolerances for castings using profile tolerancing in a general datum system
    PD CEN ISO/TS 8062-2:2013 Geometrical Product Specifications (GPS). Dimensional and geometrical tolerances for moulded parts Rules
    BS EN ISO 17450-2:2012 Geometrical product specifications (GPS). General concepts Basic tenets, specifications, operators, uncertainties and ambiguities
    MIL-PRF-31032 Revision C:2016 Printed Circuit Board/Printed Wiring Board, General Specification for
    BS EN ISO 12180-1:2011 Geometrical product specifications (GPS). Cylindricity Vocabulary and parameters of cylindrical form
    BS ISO 199:2014 Rolling bearings. Thrust bearings. Geometrical product specification (GPS) and tolerance values
    DIN EN ISO 10360-9:2014-04 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING SYSTEMS (CMS) - PART 9: CMMS WITH MULTIPLE PROBING SYSTEMS (ISO 10360-9:2013)
    I.S. EN ISO 13102:2012 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT: ELECTRONIC DIGITAL-INDICATOR GAUGE - DESIGN AND METROLOGICAL CHARACTERISTICS (ISO 13102:2012)
    BS ISO 5-2:2009 Photography and graphic technology. Density measurements Geometric conditions for transmittance density
    DIN EN ISO 13385-1:2011-12 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 1: CALLIPERS; DESIGN AND METROLOGICAL CHARACTERISTICS (ISO 13385-1:2011)
    UNI EN ISO 2538-1 : 2014 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - WEDGES - PART 1: SERIES OF ANGLES AND SLOPES
    16/30314605 DC : DRAFT MAR 2016 BS EN ISO 5459 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - DATUMS AND DATUM SYSTEMS
    NF EN ISO 12780-2 : 2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - STRAIGHTNESS - PART 2: SPECIFICATION OPERATORS
    DIN EN ISO 10360-10 E : 2017 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING SYSTEMS (CMS) - PART 10: LASER TRACKERS FOR MEASURING POINT-TO-POINT DISTANCES (ISO 10360-10:2016)
    DIN EN ISO 10360-7:2011-09 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 7: CMMs equipped with imaging probing systems (ISO 10360-7:2011)
    DIN 874-2:2003-11 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - STRAIGHT EDGES - PART 2: KNIFE EDGE STRAIGHT EDGES - DIMENSIONS, TECHNICAL DELIVERY CONDITIONS
    12/30234144 DC : 0 BS EN ISO 10360-10 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING MACHINES (CMS) - PART 10: LASER TRACKERS FOR MEASURING POINT-TO-POINT DISTANCES
    DIN CEN ISO/TS 8062-2; DIN SPEC 91184:2014-03 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES (ISO/TS 8062-2:2013)
    BS EN ISO 12781-1:2011 Geometrical product specifications (GPS). Flatness Vocabulary and parameters of flatness
    PD ISO/TS 17865:2016 Geometrical product specifications (GPS). Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty for CMMs using single and multiple stylus contacting probing systems
    BS EN ISO 2538-1:2014 Geometrical product specifications (GPS). Wedges Series of angles and slopes
    DD CEN ISO/TS 12181-2 : DRAFT 2007 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ROUNDNESS - PART 2: SPECIFICATION OPERATORS
    08/30154185 DC : DRAFT MAY 2008
    BS ISO 10959:2016 Aerospace. MJ threads. Gauging
    17/30341085 DC : 0 BS EN ISO 13385-1 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 1: DESIGN AND METROLOGICAL CHARACTERISTICS OF CALLIPERS
    I.S. EN ISO 25178-72:2017 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 72: XML FILE FORMAT X3P (ISO 25178-72:2017)
    EN ISO 2692:2014 Geometrical product specifications (GPS) - Geometrical tolerancing - Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) (ISO 2692:2014)
    DD CEN ISO/TS 12781-2:2007 Geometrical product specifications (GPS). Flatness Specification operators
    NF EN ISO 12181-2 : 2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ROUNDNESS - PART 2: SPECIFICATION OPERATORS
    DIN EN ISO 12781-1:2011-07 Geometrical product specifications (GPS) - Flatness - Part 1: Vocabulary and parameters of flatness (ISO 12781-1:2011)
    S.R. CEN ISO TS 12181-2:2007 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ROUNDNESS - PART 2: SPECIFICATION OPERATORS
    UNE-ISO 230-10:2016 Test code for machine tools -- Part 10: Determination of the measuring performance of probing systems of numerically controlled machine tools.
    ISO 14253-2:2011 Geometrical product specifications (GPS) — Inspection by measurement of workpieces and measuring equipment — Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification
    ISO 25178-71:2017 Geometrical product specifications (GPS) — Surface texture: Areal — Part 71: Software measurement standards
    UNE-EN ISO 286-1:2011 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 1: Basis of tolerances, deviations and fits (ISO 286-1:2010)
    UNE-EN ISO 2538-1:2015 Geometrical product specifications (GPS) - Wedges - Part 1: Series of angles and slopes (ISO 2538-1:2014)
    UNE-EN ISO 12180-2:2012 Geometrical product specifications (GPS) - Cylindricity - Part 2: Specification operators (ISO 12180-2:2011)
    UNE-EN ISO 12181-2:2012 Geometrical product specifications (GPS) - Roundness - Part 2: Specification operators (ISO 12181-2:2011)
    I.S. EN ISO 12181-2:2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ROUNDNESS - PART 2: SPECIFICATION OPERATORS
    BS ISO 230-10:2016 Test code for machine tools Determination of the measuring performance of probing systems of numerically controlled machine tools
    I.S. EN ISO 13225:2012 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT; HEIGHT GAUGES - DESIGN AND METROLOGICAL CHARACTERISTICS (ISO 13225:2012)
    BS EN ISO 14405-2:2011 Geometrical product specifications (GPS). Dimensional tolerancing Dimensions other than linear sizes
    S.R. CEN ISO/TS 8062-2:2013 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES (ISO/TS 8062-2:2013, CORRECTED VERSION 2013-11-01)
    NF EN ISO 3611 : 2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT: MICROMETERS FOR EXTERNAL MEASUREMENTS - DESIGN AND METROLOGICAL CHARACTERISTICS
    I.S. EN ISO 13385-1:2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 1: CALLIPERS; DESIGN AND METROLOGICAL CHARACTERISTICS
    I.S. EN ISO 25178-70:2014 GEOMETRICAL PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE: AREAL - PART 70: MATERIAL MEASURES (ISO 25178-70:2014)
    ISO 15530-3:2011 Geometrical product specifications (GPS) — Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement — Part 3: Use of calibrated workpieces or measurement standards
    UNI EN ISO 13385-1 : 2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 1: CALLIPERS - DESIGN AND METROLOGICAL CHARACTERISTICS
    DIN EN ISO 14405-2:2012-03 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 2: DIMENSIONS OTHER THAN LINEAR SIZES (ISO 14405-2:2011)
    I.S. EN ISO 10360-12:2016 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING SYSTEMS (CMS) - PART 12: ARTICULATED ARM COORDINATE MEASUREMENT MACHINES (CMM) (ISO 10360-12:2016)
    I.S. EN ISO 10360-7:2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING MACHINES (CMM) - PART 7: CMMS EQUIPPED WITH IMAGING PROBING SYSTEMS
    UNE-EN ISO 12180-1:2012 Geometrical product specifications (GPS) - Cylindricity - Part 1: Vocabulary and parameters of cylindrical form (ISO 12180-1:2011)
    NF EN ISO 14253-2 : 2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENT - PART 2: GUIDANCE FOR THE ESTIMATION OF UNCERTAINTY IN GPS MEASUREMENT, IN CALIBRATION OF MEASURING EQUIPMENT AND IN PRODUCT VERIFICATION
    NF EN ISO 13385-1 : 2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 1: CALLIPER - DESIGN AND METROLOGICAL CHARACTERISTICS
    UNI EN ISO 13102 : 2012 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT: ELECTRONIC DIGITAL-INDICATOR GAUGE - DESIGN AND METROLOGICAL CHARACTERISTICS
    NF EN ISO 12180-2 : 2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - CYLINDRICITY - PART 2: SPECIFICATION OPERATORS
    UNI EN ISO 14978 : 2006 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS AND REQUIREMENTS FOR GPS MEASURING EQUIPMENT
    ISO 492:2014 Rolling bearings — Radial bearings — Geometrical product specifications (GPS) and tolerance values
    DIN EN ISO 10360-6:2009-01 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING MACHINES (CMM) - PART 6: ESTIMATION OF ERRORS IN COMPUTING GAUSSIAN ASSOCIATED FEATURES
    BS EN ISO 10535:2006 Hoists for the transfer of disabled persons. Requirements and test methods
    UNE-EN ISO 2692:2015 Geometrical product specifications (GPS) - Geometrical tolerancing - Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) (ISO 2692:2014)
    ISO 25178-70:2014 Geometrical product specification (GPS) — Surface texture: Areal — Part 70: Material measures
    ISO 13225:2012 Geometrical product specifications (GPS) — Dimensional measuring equipment; Height gauges — Design and metrological characteristics
    EN ISO 10360-5:2010 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 5: CMMs using single and multiple stylus contacting probing systems (ISO 10360-5:2010)
    UNE-ISO 26303:2013 Machine tools -- Short-term capability evaluation of machining processes on metal-cutting machine tools
    BS EN ISO 5436-2:2012 Geometrical product specifications (GPS). Surface texture: Profile method; Measurement standards Software measurement standards
    BS EN ISO 10360-2:2009 Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM) CMMs used for measuring linear dimensions
    ONORM EN ISO 13385-1 : 2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 1: CALLIPERS - DESIGN AND METROLOGICAL CHARACTERISTICS (ISO 13385-1:2011)
    I.S. EN ISO 10360-2:2009 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING MACHINES (CMM) - PART 2: CMMS USED FOR MEASURING LINEAR DIMENSIONS
    I.S. EN ISO 1119:2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SERIES OF CONICAL TAPERS AND TAPER ANGLES (ISO 1119:2011)
    I.S. EN 12464-1:2011 LIGHT AND LIGHTING - LIGHTING OF WORK PLACES - PART 1: INDOOR WORK PLACES
    I.S. EN ISO 21649:2009 NEEDLE-FREE INJECTORS FOR MEDICAL USE - REQUIREMENTS AND TEST METHODS
    I.S. EN ISO 1101:2017 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - TOLERANCES OF FORM, ORIENTATION, LOCATION AND RUN-OUT (ISO 1101:2017)
    I.S. EN ISO 11137-3:2017 STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 3: GUIDANCE ON DOSIMETRIC ASPECTS OF DEVELOPMENT, VALIDATION AND ROUTINE CONTROL (ISO 11137-3:2017)
    I.S. EN ISO 2692:2014 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - MAXIMUM MATERIAL REQUIREMENT (MMR), LEAST MATERIAL REQUIREMENT (LMR) AND RECIPROCITY REQUIREMENT (RPR) (ISO 2692:2014)
    I.S. EN ISO 5436-2:2012 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD; MEASUREMENT STANDARDS - PART 2: SOFTWARE MEASUREMENT STANDARDS (ISO 5436-2:2012)
    I.S. EN ISO 1660:2017 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - PROFILE TOLERANCING (ISO 1660:2017)
    DIN EN 1970:2005-10 ADJUSTABLE BEDS FOR DISABLED PERSONS - REQUIREMENTS AND TEST METHODS
    ASME B89.7.3.3 : 2002 : R2007 GUIDELINES FOR ASSESSING THE RELIABILITY OF DIMENSIONAL MEASUREMENT UNCERTAINTY STATEMENTS
    VDI/VDE 2617 Blatt 10:2011-01 Accuracy of coordinate measuring machines - Characteristics and their checking - Acceptance and reverification tests of lasertrackers
    ASME B89.4.10360.2 : 2008 ACCEPTANCE TEST AND REVERIFICATION TEST FOR COORDINATE MEASURING MACHINES (CMMS) - PART 2: CMMS USED FOR MEASURING LINEAR DIMENSIONS
    VDI/VDE/DGQ/DKD 2622 Blatt 15.1:2011-10 Calibration for measuring equipment for electrical quantities - Artificial mains networks
    VDI/VDE 2617 Blatt 7:2008-09 Accuracy of coordinate measuring machines - Parameters and their checking - Estimation of measurement uncertainty of coordinate measuring machines by means of simulation
    VDI/VDE 2617 Blatt 5:2010-12 Accuracy of coordinate measuring machines - Parameters and their reverification - Interim check with artefacts
    VDI/VDE 2600 Blatt 1:2013-10 Inspection process management - Identification, classification and proof of suitability for inspection processes
    VDI/VDE/DGQ/DKD 2622 Blatt 19:2015-06 Calibration of measuring equipment for electrical quantities - Characterisation of HF-measuring cables
    VDI/VDE/DGQ/DKD 2622 Blatt 15.4:2010-05 Calibration of measuring equipment for electrical quantities - Passive measuring equipment for use in EMC-applications - Current clamps
    VDI/VDE 2617 Blatt 2.1:2014-03 Accuracy of coordinate measuring machines - Parameters and their reverification - Code of practice for the application of DIN EN ISO 10360-2 for length measurement
    VDI/VDE 2617 Blatt 12.1:2011-03 Accuracy of coordinate measuring machines - Characteristics and their checking - Acceptance and reverification tests for tactile CMM measuring microgeometries
    VDI/VDE 2634 Blatt 2:2012-08 Optical 3-D measuring systems - Optical systems based on area scanning
    VDI/VDE 2629 Blatt 2:2012-06 Accuracy of contour-measuring systems - Characteristics and their checking - Determination of the uncertainty of specific contour measurements using standards/calibrated workpieces
    VDI/VDE 2617 Blatt 8:2006-07 Accuracy of coordinate measuring machines - Characteristics and their testing - Test suitability of measurements with coordinate measuring machines
    ASME B89.7.3.3:2002 GUIDELINES FOR ASSESSING THE RELIABILITY OF DIMENSIONAL MEASUREMENT UNCERTAINTY STATEMENTS
    VDI/VDE 2617 Blatt 13; VDI/VDE 2630 Blatt 1.3:2011-12 VDI/VDE 2617 Blatt 13: Accuracy of coordinate measuring machines - Characteristics and their testing - Guideline for the application of DIN EN ISO 10360 for coordinate measuring machines with CT-sensors - VDI/VDE 2630 Blatt 1.3: Computed tomography in dimensional measurement - Guideline for the application of DIN EN ISO 10360 for coordinate measuring machines with CT-sensors
    VDI/VDE 2617 Blatt 11:2011-03 Accuracy of coordinate measuring machines - Characteristics and their checking - Determination of the uncertainty of measurement for coordinate measuring machines using uncertainty budgets
    VDI/VDE 2617 Blatt 2.2:2000-07 Accuracy of coordinate measuring machines - Parameters and their reverification - Form measurement
    VDI/VDE/DGQ/DKD 2622 Blatt 21:2004-05 Calibration of measurement equipments for electrical quantities - Recorders
    VDI/VDE 2630 Blatt 1.2:2010-11 Computed tomography in dimensional measurement - Influencing variables on measurement results and recommendations for computed tomography dimensional measurements
    VDI/VDE 2630 Blatt 2.1:2015-06 Computed tomography in dimensional measurement - Determination of the uncertainty of measurement and the test process suitability of coordinate measurement systems with CT sensors
    VDI 3431:2016-08 Bending of profiles - Testing notes for profile bending elements
    VDI/VDE/DGQ/DKD 2622 Blatt 7:2004-05 Calibration of measuring equipment for electrical quantities - Universal counter
    ASME B89.7.3.3 : 2002 : R2012 GUIDELINES FOR ASSESSING THE RELIABILITY OF DIMENSIONAL MEASUREMENT UNCERTAINTY STATEMENTS
    ASME B89.7.3.3 : 2002 : R2017 GUIDELINES FOR ASSESSING THE RELIABILITY OF DIMENSIONAL MEASUREMENT UNCERTAINTY STATEMENTS
    VDI/VDE 2629 Blatt 1:2008-08 Accuracy of contour-measuring systems - Characteristics and checking of characteristics - Acceptance testing and reverification testing of contour-measuring systems according to the tactile stylus method
    VDI/VDE/DGQ/DKD 2622 Blatt 1:2014-06 Calibration of measuring equipment for electrical quantities - Fundamentals
    VDI/VDE 2624 Blatt 2.1:2008-12 Measurement of mechanical quantities - Instructions for calibration of mobile force measurement systems
    I.S. EN ISO 12180-1:2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - CYLINDRICITY - PART 1: VOCABULARY AND PARAMETERS OF CYLINDRICAL FORM
    ISO/IEC Guide 98-4:2012 Uncertainty of measurement Part 4: Role of measurement uncertainty in conformity assessment
    17/30348149 DC : 0 BS ISO 3096 - ROLLING BEARINGS - NEEDLE ROLLERS - BOUNDARY DIMENSIONS, GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) AND TOLERANCE VALUES
    DIN EN ISO 13225:2012-08 Geometrical product specifications (GPS) - Dimensional measuring equipment; Height gauges - Design and metrological characteristics (ISO 13225:2012)
    UNI EN ISO 17450-1 : 2012 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS - PART 1: MODEL FOR GEOMETRICAL SPECIFICATION AND VERIFICATION
    UNI EN ISO 25178-604 : 2013 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 604: NOMINAL CHARACTERISTICS OF NON-CONTACT (COHERENCE SCANNING INTERFEROMETRY) INSTRUMENTS
    ONORM EN ISO 14978 : 2008 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS AND REQUIREMENTS FOR GPS MEASURING EQUIPMENT
    17/30348146 DC : 0 BS ISO 7063 - ROLLING BEARINGS - NEEDLE ROLLER BEARING TRACK ROLLERS - BOUNDARY DIMENSIONS, GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) AND TOLERANCE VALUES
    BS ISO 464:2015 Rolling bearings. Radial bearings with locating snap ring. Dimensions, geometrical product specifications (GPS) and tolerance values
    BS EN ISO 18391:2016 Geometrical product specifications (GPS). Population specification
    DD ISO/TS 15530-4:2008 Geometrical product specifications (GPS). Coordinate measuring machines (CMM). Technique for determining the uncertainty of measurement Evaluating task-specific measurement uncertainty using simulation
    BS EN ISO 1938-2:2017 Geometrical product specifications (GPS). Dimensional measuring equipment Reference disk gauges
    BS EN ISO 12181-1:2011 Geometrical product specifications (GPS). Roundness Vocabulary and parameters of roundness
    BS EN ISO 10360-8:2013 Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring systems (CMS) CMMs with optical distance sensors
    BS ISO 1328-1:2013 Cylindrical gears. ISO system of flank tolerance classification Definitions and allowable values of deviations relevant to flanks of gear teeth
    09/30118717 DC : DRAFT OCT 2009 BS ISO 230-1 - TEST CODE FOR MACHINE TOOLS - PART 1: GEOMETRIC ACCURACY OF MACHINES OPERATING UNDER NO-LOAD OR QUASI-STATIC CONDITIONS
    BS EN ISO 15530-3:2011 Geometrical product specifications (GPS). Coordinate measuring machines (CMM). Technique for determining the uncertainty of measurement Use of calibrated workpieces or measurement standards
    13/30280243 DC : 0 BS ISO 5393 - ROTARY TOOLS FOR THREADED FASTENERS - PERFORMANCE TEST METHOD
    DIN EN ISO 16610-85 E : 2013 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 85: MORPHOLOGICAL AREAL FILTERS: SEGMENTATION (ISO 16610-85:2013)
    I.S. EN ISO 3611:2010 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT: MICROMETERS FOR EXTERNAL MEASUREMENTS - DESIGN AND METROLOGICAL CHARACTERISTICS
    UNE-ISO 230-1:2014 Machine-tools. Test code for machine tools -- Part 1: Geometric accuracy of machines operating under no-load or quasi-static conditions
    DIN EN ISO 12781-2:2011-07 Geometrical product specifications (GPS) - Flatness - Part 2: Specification operators (ISO 12781-2:2011)
    UNE-EN ISO 25178-3:2013 Geometrical product specifications (GPS) - Surface texture: Areal - Part 3: Specification operators (ISO 25178-3:2012)
    I.S. EN ISO 139:2005 TEXTILES - STANDARD ATMOSPHERES FOR CONDITIONING AND TESTING
    BS EN ISO 25178-606:2015 Geometrical product specification (GPS). Surface texture: Areal Nominal characteristics of non-contact (focus variation) instruments
    DIN EN ISO 12180-2:2011-07 Geometrical product specifications (GPS) - Cylindricity - Part 2: Specification operators (ISO 12180-2:2011)
    BS EN ISO 25178-603:2013 Geometrical product specifications (GPS). Surface texture: Areal Nominal characteristics of non-contact (phase-shifting interferometric microscopy) instruments
    UNI EN ISO 2538-2 : 2014 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - WEDGES - PART 2: DIMENSIONING AND TOLERANCING
    BS EN ISO 14405-3:2017 Geometrical product specifications (GPS). Dimensional tolerancing Angular sizes
    BS EN ISO 16610-71:2014 Geometrical product specifications (GPS). Filtration Robust areal filters: Gaussian regression filters
    16/30338746 DC : DRAFT APR 2016 BS ISO 15872 - AEROSPACE - UNJ THREADS - GAUGING
    BIS IS 16226-2 : 2014 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ROUNDNESS - PART 2: SPECIFICATION OPERATORS
    AGMA 935 : A RECOMMENDATIONS RELATIVE TO THE EVALUATION OF RADIAL COMPOSITE GEAR DOUBLE FLANK TESTERS
    DIN EN ISO 10360-10:2017-03 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 10: Laser trackers for measuring point-to-point distances (ISO 10360-10:2016)
    UNI EN ISO 12780-1 : 2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - STRAIGHTNESS - PART 1: VOCABULARY AND PARAMETERS OF STRAIGHTNESS
    UNI EN ISO 15530-3 : 2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - COORDINATE MEASURING MACHINES (CMM): TECHNIQUE FOR DETERMINING THE UNCERTAINTY OF MEASUREMENT - PART 3: USE OF CALIBRATED WORKPIECES OR MEASUREMENT STANDARDS
    DIN EN ISO 25178-70:2014-06 GEOMETRICAL PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE: AREAL - PART 70: MATERIAL MEASURES (ISO 25178-70:2014)
    DIN EN ISO 16610-21 E : 2013 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 21: LINEAR PROFILE FILTERS: GAUSSIAN FILTERS (ISO 16610-21:2011)
    BS EN ISO 14253-5:2015 Geometrical product specifications (GPS). Inspection by measurement of workpieces and measuring equipment Uncertainty in verification testing of indicating measuring instruments
    DIN EN ISO 14638 E : 2015 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - MATRIX MODEL (ISO 14638:2015)
    DD CEN ISO/TS 12180-2:2007 Geometrical product specifications (GPS). Cylindricity Specification operators
    BS ISO 13041-6:2009 Test conditions for numerically controlled turning machines and turning centres Accuracy of a finished test piece
    UNE-EN ISO 17450-3:2017 Geometrical product specifications (GPS) - General concepts - Part 3: Toleranced features (ISO 17450-3:2016)
    BS ISO 26303:2012 Machine tools — Short-term capability evaluation of machining processes on metal-cutting machine tools
    BS EN ISO 11608-5:2012 Needle-based injection systems for medical use. Requirements and test methods Automated functions
    I.S. EN ISO 16610-21:2012 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 21: LINEAR PROFILE FILTERS: GAUSSIAN FILTERS (ISO 16610-21:2011)
    UNE-ISO 13041-6:2011 Test conditions for numerically controlled turning machines and turning centres -- Part 6: Accuracy of a finished test piece
    DIN EN ISO 2538-1:2015-01 GEOMETRICAL PRODUCT SPECFICATIONS (GPS) - WEDGES - PART 1: SERIES OF ANGLES AND SLOPES; (ISO 2538-1:2014)
    ISO 12297-2:2018 Rolling bearings — Cylindrical rollers — Part 2: Boundary dimensions, geometrical product specifications (GPS) and tolerance values for ceramic rollers
    10/30208977 DC : 0 BS EN ISO 11608-1 - NEEDLE-BASED INJECTION SYSTEMS FOR MEDICAL USE - REQUIREMENTS AND TEST METHODS - PART 1: NEEDLE-BASED INJECTION SYSTEMS
    09/30198155 DC : DRAFT MAY 2009 BS EN ISO 12181-2 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ROUNDNESS - PART 2: SPECIFICATION OPERATORS
    BS EN ISO 13102:2012 Geometrical product specifications (GPS). Dimensional measuring equipment. Electronic digital-indicator gauge. Design and metrological characteristics
    BS EN ISO 10360-9:2013 Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring systems (CMS) CMMs with multiple probing systems
    14/30291326 DC : 0 BS EN ISO 10360-12 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING SYSTEMS (CMS) - PART 12: ARTICULATED ARM COORDINATE MEASUREMENT MACHINES (CMM)
    UNE-EN ISO 17450-1:2015 Geometrical product specifications (GPS) - General concepts - Part 1: Model for geometrical specification and verification (ISO 17450-1:2011)
    UNI EN ISO 16610-71 : 2014 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 71: ROBUST AREAL FILTERS: GAUSSIAN REGRESSION FILTERS
    ISO/TS 15530-4:2008 Geometrical Product Specifications (GPS) — Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement — Part 4: Evaluating task-specific measurement uncertainty using simulation
    UNI EN ISO 3611 : 2010 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT: MICROMETERS FOR EXTERNAL MEASUREMENTS - DESIGN AND METROLOGICAL CHARACTERISTICS
    UNI EN ISO 286-1 : 2010 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ISO CODE SYSTEM FOR TOLERANCES ON LINEAR SIZES - PART 1: BASIS OF TOLERANCES, DEVIATIONS AND FITS
    12/30264410 DC : 0 BS ISO 199 - ROLLING BEARINGS - THRUST BEARINGS - TOLERANCES
    BS EN ISO 25178-70:2014 Geometrical product specification (GPS). Surface texture: Areal Material measures
    PD ISO/TR 10064-1:2017 Code of inspection practice Measurement of cylindrical gear tooth flanks
    DIN EN ISO 1660 E : 2017 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - PROFILE TOLERANCING (ISO 1660:2017)
    UNE-EN ISO 10360-10:2017 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 10: Laser trackers for measuring point-to-point distances (ISO 10360-10:2016)
    DIN EN ISO 25178-603:2014-02 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 603: NOMINAL CHARACTERISTICS OF NON-CONTACT (PHASE-SHIFTING INTERFEROMETRIC MICROSCOPY) INSTRUMENTS (ISO 25178-603:2013)
    I.S. EN ISO 5459:2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - DATUMS AND DATUM SYSTEMS
    UNI EN ISO 11608-5 : 2013 NEEDLE-BASED INJECTION SYSTEMS FOR MEDICAL USE - REQUIREMENTS AND TEST METHODS - PART 5: AUTOMATED FUNCTIONS
    ISO/TR 14253-6:2012 Geometrical product specifications (GPS) — Inspection by measurement of workpieces and measuring equipment — Part 6: Generalized decision rules for the acceptance and rejection of instruments and workpieces
    CAN/CSA-ISO 11137-3:17 Sterilization of health care products — Radiation — Part 3: Guidance on dosimetric aspects of development, validation and routine control (Adopted ISO 11137-3:2017, second edition, 2017-06)
    I.S. EN ISO 16610-85:2013 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 85: MORPHOLOGICAL AREAL FILTERS: SEGMENTATION (ISO 16610-85:2013)
    NF EN ISO 10360-7 : 2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING MACHINES (CMM) - PART 7: CMMS EQUIPPED WITH IMAGING PROBING SYSTEMS
    I.S. EN ISO 12780-1:2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - STRAIGHTNESS - PART 1: VOCABULARY AND PARAMETERS OF STRAIGHTNESS
    UNI EN ISO 25178-70 : 2014 GEOMETRICAL PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE: AREAL - PART 70: MATERIAL MEASURES
    UNE-EN ISO 8015:2012 Geometrical product specifications (GPS) - Fundamentals - Concepts, principles and rules (ISO 8015:2011)
    I.S. EN ISO 12781-2:2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FLATNESS - PART 2: SPECIFICATION OPERATORS
    I.S. EN ISO 14978:2006 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS AND REQUIREMENTS FOR GPS MEASURING EQUIPMENT
    UNE-EN ISO 9493:2012 Geometrical product specifications (GPS) - Dimensional measuring equipment: Dial test indicators (lever type) - Design and metrological characteristics (ISO 9493:2010)
    ISO 199:2014 Rolling bearings — Thrust bearings — Geometrical product specification (GPS) and tolerance values
    ISO 286-1:2010 Geometrical product specifications (GPS) ISO code system for tolerances on linear sizes Part 1: Basis of tolerances, deviations and fits
    ABMA ISO 199 : 2014 ROLLING BEARINGS - THRUST BEARINGS - GEOMETRICAL PRODUCT SPECIFICATION (GPS) AND TOLERANCE VALUES
    UNI EN ISO 13225 : 2012 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT; HEIGHT GAUGES - DESIGN AND METROLOGICAL CHARACTERISTICS
    ISO 14405-2:2011 Geometrical product specifications (GPS) Dimensional tolerancing Part 2: Dimensions other than linear sizes
    UNI EN ISO 5459 : 2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - DATUMS AND DATUM SYSTEMS
    EN 12464-1:2011 Light and lighting - Lighting of work places - Part 1: Indoor work places
    I.S. EN ISO 12781-1:2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FLATNESS - PART 1: VOCABULARY AND PARAMETERS OF FLATNESS
    ISO/TS 17863:2013 Geometrical product specification (GPS) Tolerancing of moveable assemblies
    ISO 5458:1998 Geometrical Product Specifications (GPS) Geometrical tolerancing Positional tolerancing
    ISO 1328-1:2013 Cylindrical gears — ISO system of flank tolerance classification — Part 1: Definitions and allowable values of deviations relevant to flanks of gear teeth
    ISO 5-2:2009 Photography and graphic technology Density measurements Part 2: Geometric conditions for transmittance density
    S.R. CEN ISO TS 12180-2:2007 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - CYLINDRICITY - PART 2: SPECIFICATION OPERATORS
    S.R. CEN ISO TS 14253-3:2007 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENT - PART 3: GUIDELINES FOR ACHIEVING AGREEMENTS ON MEASUREMENT UNCERTAINTY STATEMENTS
    DIN EN ISO 10360-2:2010-06 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 2: CMMs used for measuring linear dimensions (ISO 10360-2:2009)
    DIN EN ISO 10360-5:2011-01 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING MACHINES (CMM) - PART 5: CMMS USING SINGLE AND MULTIPLE STYLUS CONTACTING PROBING SYSTEMS
    DIN EN ISO 4288:1998-04 GPS - Surface texture: Profile method - Rules and procedures for the assessment of surface texture (ISO 4288:1996)
    DIN EN ISO 14978:2006-09 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS AND REQUIREMENTS FOR GPS MEASURING EQUIPMENT
    DIN EN ISO 11608-1:2015-04 Needle-based injection systems for medical use - Requirements and test methods - Part 1: Needle-based injection systems (ISO 11608-1:2014)
    BS EN ISO 21649:2009 Needle-free injectors for medical use. Requirements and test methods
    ISO 464:2015 Rolling bearings Radial bearings with locating snap ring Dimensions, geometrical product specifications (GPS) and tolerance values
    ISO 463:2006 Geometrical Product Specifications (GPS) Dimensional measuring equipment Design and metrological characteristics of mechanical dial gauges
    ISO/TS 12781-2:2003 Geometrical Product Specifications (GPS) Flatness Part 2: Specification operators
    BS EN ISO 10360-3:2001 Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM) CMMs with the axis of the rotary table as the fourth axis
    ISO 1302:2002 Geometrical Product Specifications (GPS) Indication of surface texture in technical product documentation
    BS EN ISO 139 : 2005 TEXTILES - STANDARD ATMOSPHERES FOR CONDITIONING AND TESTING
    ISO 21649:2006 Needle-free injectors for medical use — Requirements and test methods
    ISO 10360-6:2001 Geometrical Product Specifications (GPS) — Acceptance and reverification tests for coordinate measuring machines (CMM) — Part 6: Estimation of errors in computing Gaussian associated features
    ISO/TS 15530-1:2013 Geometrical product specifications (GPS) — Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement — Part 1: Overview and metrological characteristics
    EN ISO 14978:2006/AC:2008 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS AND REQUIREMENTS FOR GPS MEASURING EQUIPMENT
    I.S. EN ISO 13385-2:2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 2: CALLIPER DEPTH GAUGES; DESIGN AND METROLOGICAL CHARACTERISTICS
    EN ISO 13385-2:2011 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Calliper depth gauges; Design and metrological characteristics (ISO 13385-2:2011)
    UNE-EN ISO 10360-5:2012 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 5: CMMs using single and multiple stylus contacting probing systems (ISO 10360-5:2010)
    ONORM EN ISO 13385-2 : 2013 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 2: CALLIPER DEPTH GAUGES - DESIGN AND METROLOGICAL CHARACTERISTICS (ISO 13385-2:2011)
    ONORM EN ISO 10360-5 : 2010 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING MACHINES (CMM) - PART 5: CMMS USING SINGLE AND MULTIPLE STYLUS CONTACTING PROBING SYSTEMS
    UNI EN ISO 10360-5 : 2010 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING MACHINES (CMM) - PART 5: CMMS USING SINGLE AND MULTIPLE STYLUS CONTACTING PROBING SYSTEMS
    EN ISO 25178-72:2017 Geometrical product specifications (GPS) - Surface texture: Areal - Part 72: XML file format x3p (ISO 25178-72:2017)
    EN 1970:2000/A1:2005 ADJUSTABLE BEDS FOR DISABLED PERSONS - REQUIREMENTS AND TEST METHODS
    EN ISO 14405-3:2017 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 3: Angular sizes (ISO 14405-3:2016)
    UNI EN ISO 463 : 2006 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - DESIGN AND METROLOGICAL CHARACTERISTICS OF MECHANICAL DIAL GAUGES
    UNI EN ISO 1119 : 2012 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SERIES OF CONICAL TAPERS AND TAPERS ANGLES
    UNI EN ISO 139 : 2011 TEXTILES - STANDARD ATMOSPHERES FOR CONDITIONING AND TESTING
    UNI EN ISO 10360-6 : 2005 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING MACHINES (CMM) - PART 6: ESTIMATION OF ERRORS IN COMPUTING GAUSSIAN ASSOCIATED FEATURES
    UNI EN ISO 5436-2 : 2012 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD; MEASUREMENT STANDARDS - PART 2: SOFTWARE MEASUREMENT STANDARDS
    ONORM EN ISO 12179 : 2009 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - CALIBRATION OF CONTACT (STYLUS) INSTRUMENTS
    I.S. EN ISO 10360-1:2000 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING MACHINES (CMM) - PART 1: VOCABULARY
    UNI EN ISO 10360-2 : 2010 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING MACHINES (CMM) - PART 2: CMMS USED FOR MEASURING LINEAR DIMENSIONS
    UNE-EN ISO 12780-2:2012 Geometrical product specifications (GPS) - Straightness - Part 2: Specification operators (ISO 12780-2:2011)
    AGMA ISO 10064-5 : A CODE OF INSPECTION PRACTICE - PART 5: RECOMMENDATIONS RELATIVE TO EVALUATION OF GEAR MEASURING INSTRUMENTS
    UNI ISO 13041-6 : 2010 Test conditions for numerically controlled turning machines and turning centres - Part 6: Accuracy of a finished test piece
    DIN SPEC 91184 E : 2014 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES (ISO/TS 8062-2:2013)
    09/30198167 DC : DRAFT MAY 2009 BS EN ISO 12781-2 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FLATNESS - PART 2: SPECIFICATION OPERATORS
    08/30180227 DC : DRAFT MAR 2008 BS EN ISO 3611 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING INSTRUMENTS - MICROMETERS FOR EXTERNAL MEASUREMENTS - DESIGN AND METROLOGICAL CHARACTERISTICS
    10/30213495 DC : 0 BS ISO 10360-9 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING MACHINES (CMM) - PART 9: CMMS WITH MULTIPLE PROBING SYSTEMS
    16/30341970 DC : 0 BS ISO 1206 - ROLLING BEARINGS - NEEDLE ROLLER BEARINGS WITH MACHINED RINGS - BOUNDARY DIMENSIONS, GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) AND TOLERANCE VALUES
    BS EN ISO 12181-2:2011 Geometrical product specifications (GPS). Roundness Specification operators
    DIN EN ISO 13102:2012-12 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT: ELECTRONIC DIGITAL-INDICATOR GAUGE - DESIGN AND METROLOGICAL CHARACTERISTICS (ISO 13102:2012)
    BS EN ISO 286-1:2010 Geometrical product specifications (GPS). ISO code system for tolerances on linear sizes Basis of tolerances, deviations and fits
    UNI CEN ISO/TS 15530-1 : 2013 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - COORDINATE MEASURING MACHINES (CMM): TECHNIQUE FOR DETERMINING THE UNCERTAINTY OF MEASUREMENT - PART 1: OVERVIEW AND METROLOGICAL CHARACTERISTICS
    UNI EN ISO 21649 : 2009 NEEDLE-FREE INJECTORS FOR MEDICAL USE - REQUIREMENTS AND TEST METHODS
    UNI ISO/TS 15530-4 : 2010 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - COORDINATE MEASURING MACHINES (CMM): TECHNIQUE FOR DETERMINING THE UNCERTAINTY OF MEASUREMENT - PART 4: EVALUATING TASK-SPECIFIC MEASUREMENT UNCERTAINTY USING SIMULATION
    UNI EN ISO 16610-21 : 2012 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 21: LINEAR PROFILE FILTERS: GAUSSIAN FILTERS
    UNI EN ISO 10360-9 : 2014 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING SYSTEMS (CMS) - PART 9: CMMS WITH MULTIPLE PROBING SYSTEMS
    UNI EN ISO 12180-2 : 2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - CYLINDRICITY - PART 2: SPECIFICATION OPERATORS
    DIN EN ISO 12780-2:2011-07 Geometrical product specifications (GPS) - Straightness - Part 2: Specification operators (ISO 12780-2:2011)
    UNI CEN ISO/TS 8062-2 : 2013 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES
    14/30257552 DC : 0 BS ISO 3245 - ROLLING BEARINGS - NEEDLE ROLLER BEARINGS, DRAWN CUP WITHOUT INNER RING - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS), BOUNDARY DIMENSIONS AND TOLERANCES
    NF EN ISO 9493 : 2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT: DIAL TEST INDICATORS (LEVER TYPE) - DESIGN AND METROLOGICAL CHARACTERISTICS
    BS EN ISO 16610-41:2015 Geometrical product specifications (GPS). Filtration Morphological profile filters: Disk and horizontal line-segment filters
    BS EN ISO 8015:2011 Geometrical product specifications (GPS). Fundamentals. Concepts, principles and rules
    UNE-EN ISO 16610-21:2013 Geometrical product specifications (GPS) - Filtration - Part 21: Linear profile filters: Gaussian filters (ISO 16610-21:2011)
    I.S. EN ISO 9493:2010 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT: DIAL TEST INDICATORS (LEVER TYPE) - DESIGN AND METROLOGICAL CHARACTERISTICS
    FD ISO/TR 14253-6 : 2013 FD GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENT - PART 6: GENERALIZED DECISION RULES FOR THE ACCEPTANCE AND REJECTION OF INSTRUMENTS AND WORKPIECES
    UNE-EN ISO 12781-1:2012 Geometrical product specifications (GPS) - Flatness - Part 1: Vocabulary and parameters of flatness (ISO 12781-1:2011)
    DIN ISO 18653:2009-12 Gears - Evaluation of instruments for the measurement of individual gears (ISO 18653:2003)
    I.S. EN ISO 286-1:2010/AC:2013 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ISO CODE SYSTEM FOR TOLERANCES ON LINEAR SIZES - PART 1: BASIS OF TOLERANCES, DEVIATIONS AND FITS (ISO 286-1:2010)
    UNE-EN ISO 25178-1:2016 Geometrical product specifications (GPS) - Surface texture: Areal - Part 1: Indication of surface texture (ISO 25178-1:2016)
    BS EN ISO 14638:2015 Geometrical product specifications (GPS). Matrix model
    00/715013 DC : DRAFT OCT 2000 PREN 13231-3 - RAILWAY APPLICATIONS - TRACK - ACCEPTANCE OF WORKS - PART 3: ACCEPTANCE OF RAIL GRINDING, MILLING AND PLANING WORK IN TRACK
    DIN EN ISO 16610-41:2015-12 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 41: MORPHOLOGICAL PROFILE FILTERS: DISK AND HORIZONTAL LINE-SEGMENT FILTERS (ISO 16610-41:2015)
    DIN EN ISO 16610-31 E : 2017 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 31: ROBUST PROFILE FILTERS: GAUSSIAN REGRESSION FILTERS (ISO 16610-31:2016)
    DD CEN ISO/TS 14253-4:2010 Geometrical product specifications (GPS). Inspection by measurement of workpieces and measuring equipment Background on functional limits and specification limits in decision rules
    DD ISO/PAS 12868:2009 Geometrical product specification (GPS). Coordinate measuring machines (CMM). Testing the performance of CMMs using single-stylus contacting probing systems
    BS EN ISO 16610-85:2013 Geometrical product specifications (GPS). Filtration Morphological areal filters: Segmentation
    I.S. EN ISO 16610-1:2015 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 1: OVERVIEW AND BASIC CONCEPTS (ISO 16610-1:2015)
    BS ISO 230-1:2012 Test code for machine tools Geometric accuracy of machines operating under no-load or quasi-static conditions
    09/30198170 DC : DRAFT MAY 2009 BS EN ISO 14253-3 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORK PIECES AND MEASURING EQUIPMENT - PART 3: GUIDELINES FOR ACHIEVING AGREEMENTS ON MEASUREMENT UNCERTAINTY STATEMENTS
    BS ISO 492:2014 Rolling bearings. Radial bearings. Geometrical product specifications (GPS) and tolerance values
    BS ISO 15872:2017 Aerospace. UNJ threads. Gauging
    09/30198161 DC : 0 BS EN ISO 12780-2 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - STRAIGHTNESS - PART 2: SPECIFICATION OPERATORS
    07/30145258 DC : 0 BS ISO 20072 - AEROSOL DRUG DELIVERY DEVICES DESIGN VERIFICATION - REQUIREMENTS AND TEST METHODS
    I.S. EN ISO 14638:2015 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - MATRIX MODEL (ISO 14638:2015)
    UNI CEN/TR 15235 : 2012 WELDING - METHODS FOR ASSESSING IMPERFECTIONS IN METALLIC STRUCTURES
    CSA ISO/TR 10017 : 2003 : R2013 GUIDANCE ON STATISTICAL TECHNIQUES FOR ISO 9001:2000
    08/30184522 DC : DRAFT JUNE 2008 BS ISO 2129 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INDICATION OF DIMENSIONS AND TOLERANCES - MECHANICAL ENGINEERING DRAWINGS
    PD ISO/TR 10017:2003 Guidance on statistical techniques for ISO 9001:2000
    UNE-EN ISO 12780-1:2012 Geometrical product specifications (GPS) - Straightness - Part 1: Vocabulary and parameters of straightness (ISO 12780-1:2011)
    I.S. EN ISO 2538-2:2014 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - WEDGES - PART 2: DIMENSIONING AND TOLERANCING (ISO 2538-2:2014)
    NF EN ISO 14253-3 : 2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENT - PART 3: GUIDELINES FOR ACHIEVING AGREEMENTS ON MEASUREMENT UNCERTAINTY STATEMENTS
    DIN EN ISO 14253-3:2011-10 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 3: Guidelines for achieving agreements on measurement uncertainty statements (ISO 14253-3:2011)
    DIN EN ISO 2538-2 E : 2015 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - WEDGES - PART 2: DIMENSIONING AND TOLERANCING (ISO 2538-2:2014)
    DIN EN ISO 12181-1:2011-07 Geometrical product specifications (GPS) - Roundness - Part 1: Vocabulary and parameters of roundness (ISO 12181-1:2011)
    DIN EN ISO 16610-71:2014-12 Geometrical product specifications (GPS) - Filtration - Part 71: Robust areal filters: Gaussian regression filters (ISO 16610-71:2014)
    17/30346164 DC : 0 BS ISO 20457 - PLASTICS MOULDED PARTS - TOLERANCES AND ACCEPTANCE CONDITIONS
    I.S. EN ISO 11608-5:2012 NEEDLE-BASED INJECTION SYSTEMS FOR MEDICAL USE - REQUIREMENTS AND TEST METHODS - PART 5: AUTOMATED FUNCTIONS (ISO 11608-5:2012)
    UNI EN ISO 12781-1 : 2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FLATNESS - PART 1: VOCABULARY AND PARAMETERS OF FLATNESS
    UNE-EN ISO 13225:2012 Geometrical product specifications (GPS) - Dimensional measuring equipment; Height gauges - Design and metrological characteristics (ISO 13225:2012)
    S.R. CEN ISO/TS 14253-4:2010 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENT - PART 4: BACKGROUND ON FUNCTIONAL LIMITS AND SPECIFICATION LIMITS IN DECISION RULES
    I.S. EN ISO 14253-3:2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENT - PART 3: GUIDELINES FOR ACHIEVING AGREEMENTS ON MEASUREMENT UNCERTAINTY STATEMENTS
    EN ISO 15530-3:2011 Geometrical product specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 3: Use of calibrated workpieces or measurement standards (ISO 15530-3:2011)
    ANSI/AAMI/ISO 11137-3:2017 STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 3: GUIDANCE ON DOSIMETRIC ASPECTS OF DEVELOPMENT, VALIDATION AND ROUTINE CONTROL
    I.S. EN ISO 16610-31:2016 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 31: ROBUST PROFILE FILTERS: GAUSSIAN REGRESSION FILTERS (ISO 16610-31:2016)
    ISO 8062-4:2017 Geometrical product specifications (GPS) — Dimensional and geometrical tolerances for moulded parts — Part 4: General tolerances for castings using profile tolerancing in a general datum system
    ISO/TR 230-11:2018 Test code for machine tools Part 11: Measuring instruments suitable for machine tool geometry tests
    S.R. CEN ISO/TS 15530-1:2013 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - COORDINATE MEASURING MACHINES (CMM): TECHNIQUE FOR DETERMINING THE UNCERTAINTY OF MEASUREMENT - PART 1: OVERVIEW AND METROLOGICAL CHARACTERISTICS (ISO/TS 15530-1:2013)
    DIN EN ISO 15530-3:2012-01 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - COORDINATE MEASURING MACHINES (CMM): TECHNIQUE FOR DETERMINING THE UNCERTAINTY OF MEASUREMENT - PART 3: USE OF CALIBRATED WORKPIECES OR MEASUREMENT STANDARDS (ISO 15530-3:2011)
    I.S. EN ISO 25178-604:2013 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 604: NOMINAL CHARACTERISTICS OF NON-CONTACT (COHERENCE SCANNING INTERFEROMETRY) INSTRUMENTS (ISO 25178-604:2013)
    I.S. EN ISO 17450-1:2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS - PART 1: MODEL FOR GEOMETRICAL SPECIFICATION AND VERIFICATION (ISO 17450-1:2011)
    I.S. EN ISO 2538-1:2014 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - WEDGES - PART 1: SERIES OF ANGLES AND SLOPES (ISO 2538-1:2014)
    ISO 3245:2015 Rolling bearings — Needle roller bearings with drawn cup and without inner ring — Boundary dimensions, geometrical product specifications (GPS) and tolerance values
    I.S. EN ISO 25178-71:2017 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 71: SOFTWARE MEASUREMENT STANDARDS (ISO 25178-1:2017)
    BS ISO 5393:2017 Rotary tools for threaded fasteners. Performance test method
    DIN EN ISO 14253-2:2011-11 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENT - PART 2: GUIDANCE FOR THE ESTIMATION OF UNCERTAINTY IN GPS MEASUREMENT, IN CALIBRATION OF MEASURING EQUIPMENT AND IN PRODUCT VERIFICATION (ISO 14253-2:2011)
    I.S. EN ISO 25178-603:2013 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 603: NOMINAL CHARACTERISTICS OF NON-CONTACT (PHASE-SHIFTING INTERFEROMETRIC MICROSCOPY) INSTRUMENTS (ISO 25178-603:2013)
    S.R. ISO/TR 10017:2003 GUIDANCE ON STATISTICAL TECHNIQUES FOR ISO 9001:2000
    UNI EN ISO 14253-2 : 2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENT - PART 2: GUIDANCE FOR THE ESTIMATION OF UNCERTAINTY IN GPS MEASUREMENT, IN CALIBRATION OF MEASURING EQUIPMENT AND IN PRODUCT VERIFICATION
    UNE-EN ISO 3611:2012 Geometrical product specifications (GPS) - Dimensional measuring equipment: Micrometers for external measurements - Design and metrological characteristics (ISO 3611:2010)
    I.S. EN ISO 16610-41:2015 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 41: MORPHOLOGICAL PROFILE FILTERS: DISK AND HORIZONTAL LINE-SEGMENT FILTERS (ISO 16610-41:2015)
    EN ISO 25178-71:2017 Geometrical product specifications (GPS) - Surface texture: Areal - Part 71: Software measurement standards (ISO 25178-1:2017)
    ISO 230-10:2016 Test code for machine tools Part 10: Determination of the measuring performance of probing systems of numerically controlled machine tools
    ISO 10959:2016 Aerospace MJ threads Gauging
    I.S. EN ISO 12780-2:2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - STRAIGHTNESS - PART 2: SPECIFICATION OPERATORS
    I.S. EN ISO 14253-2:2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENT - PART 2: GUIDANCE FOR THE ESTIMATION OF UNCERTAINTY IN GPS MEASUREMENT, IN CALIBRATION OF MEASURING EQUIPMENT AND IN PRODUCT VERIFICATION
    I.S. EN ISO 12180-2:2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - CYLINDRICITY - PART 2: SPECIFICATION OPERATORS
    DIN EN ISO 21649 E : 2010 NEEDLE-FREE INJECTORS FOR MEDICAL USE - REQUIREMENTS AND TEST METHODS
    DIN EN ISO 11608-1 E : 2015 NEEDLE-BASED INJECTION SYSTEMS FOR MEDICAL USE - REQUIREMENTS AND TEST METHODS - PART 1: NEEDLE-BASED INJECTION SYSTEMS (ISO 11608-1:2014)
    DIN EN ISO 463 E : 2006 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - DESIGN AND METROLOGICAL CHARACTERISTICS OF MECHANICAL DIAL GAUGES
    DIN EN ISO 2692:2015-12 Geometrical product specifications (GPS) - Geometrical tolerancing - Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) (ISO 2692:2014)
    ISO/TS 12181-2:2003 Geometrical Product Specifications (GPS) Roundness Part 2: Specification operators
    ISO 139:2005 Textiles Standard atmospheres for conditioning and testing
    ISO 17450-3:2016 Geometrical product specifications (GPS) General concepts Part 3: Toleranced features
    ISO 16610-1:2015 Geometrical product specifications (GPS) — Filtration — Part 1: Overview and basic concepts
    ISO 25178-603:2013 Geometrical product specifications (GPS) — Surface texture: Areal — Part 603: Nominal characteristics of non-contact (phase-shifting interferometric microscopy) instruments
    BS EN ISO 1101:2017 Geometrical product specifications (GPS). Geometrical tolerancing. Tolerances of form, orientation, location and run-out
    ISO 16610-21:2011 Geometrical product specifications (GPS) — Filtration — Part 21: Linear profile filters: Gaussian filters
    ISO 5436-2:2012 Geometrical product specifications (GPS) — Surface texture: Profile method; Measurement standards — Part 2: Software measurement standards
    ISO 1119:2011 Geometrical product specifications (GPS) — Series of conical tapers and taper angles
    ISO 14253-5:2015 Geometrical product specifications (GPS) Inspection by measurement of workpieces and measuring equipment Part 5: Uncertainty in verification testing of indicating measuring instruments
    ISO 1660:2017 Geometrical product specifications (GPS) — Geometrical tolerancing — Profile tolerancing
    ISO 10360-10:2016 Geometrical product specifications (GPS) Acceptance and reverification tests for coordinate measuring systems (CMS) Part 10: Laser trackers for measuring point-to-point distances
    ISO 10360-9:2013 Geometrical product specifications (GPS) — Acceptance and reverification tests for coordinate measuring systems (CMS) — Part 9: CMMs with multiple probing systems
    ISO 18391:2016 Geometrical product specifications (GPS) Population specification
    ISO 9493:2010 Geometrical product specifications (GPS) Dimensional measuring equipment: Dial test indicators (lever type) Design and metrological characteristics
    ISO 2692:2014 Geometrical product specifications (GPS) Geometrical tolerancing Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR)
    ISO 12781-2:2011 Geometrical product specifications (GPS) Flatness Part 2: Specification operators
    UNE-EN 12464-1:2012 Light and lighting - Lighting of work places - Part 1: Indoor work places
    ISO 18653:2003 Gears Evaluation of instruments for the measurement of individual gears
    ISO 25178-3:2012 Geometrical product specifications (GPS) — Surface texture: Areal — Part 3: Specification operators
    ISO 17450-2:2012 Geometrical product specifications (GPS) — General concepts — Part 2: Basic tenets, specifications, operators, uncertainties and ambiguities
    ISO 10360-5:2010 Geometrical product specifications (GPS) Acceptance and reverification tests for coordinate measuring machines (CMM) Part 5: CMMs using single and multiple stylus contacting probing systems
    ISO 2538-1:2014 Geometrical product specifications (GPS) Wedges Part 1: Series of angles and slopes
    BS EN ISO 10360-6:2001 Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM) Estimation of errors in computing Gaussian associated features
    ISO 14253-3:2011 Geometrical product specifications (GPS) Inspection by measurement of workpieces and measuring equipment Part 3: Guidelines for achieving agreements on measurement uncertainty statements
    ISO 3040:2016 Geometrical product specifications (GPS) Dimensioning and tolerancing Cones
    ISO 10360-4:2000 Geometrical Product Specifications (GPS) Acceptance and reverification tests for coordinate measuring machines (CMM) Part 4: CMMs used in scanning measuring mode
    ISO 10535:2006 Hoists for the transfer of disabled persons Requirements and test methods
    ISO 1938-1:2015 Geometrical product specifications (GPS) — Dimensional measuring equipment — Part 1: Plain limit gauges of linear size
    BS EN ISO 463:2006 Geometrical Product Specifications (GPS). Dimensional measuring equipment. Design and metrological characteristics of mechanical dial gauges
    ISO 3611:2010 Geometrical product specifications (GPS) — Dimensional measuring equipment: Micrometers for external measurements — Design and metrological characteristics
    ISO 5459:2011 Geometrical product specifications (GPS) — Geometrical tolerancing — Datums and datum systems
    ISO 25178-604:2013 Geometrical product specifications (GPS) — Surface texture: Areal — Part 604: Nominal characteristics of non-contact (coherence scanning interferometry) instruments
    ISO 25178-1:2016 Geometrical product specifications (GPS) Surface texture: Areal Part 1: Indication of surface texture
    ISO 13385-1:2011 Geometrical product specifications (GPS) Dimensional measuring equipment Part 1: Callipers; Design and metrological characteristics
    ISO/TS 14253-2:1999 Geometrical Product Specifications (GPS) Inspection by measurement of workpieces and measuring equipment Part 2: Guide to the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification
    ISO 12180-1:2011 Geometrical product specifications (GPS) Cylindricity Part 1: Vocabulary and parameters of cylindrical form
    ISO 13102:2012 Geometrical product specifications (GPS) — Dimensional measuring equipment: Electronic digital-indicator gauge — Design and metrological characteristics
    ISO/TS 12780-2:2003 Geometrical Product Specifications (GPS) Straightness Part 2: Specification operators
    ISO 14638:2015 Geometrical product specifications (GPS) Matrix model
    ISO 8015:2011 Geometrical product specifications (GPS) Fundamentals Concepts, principles and rules
    ISO 12181-1:2011 Geometrical product specifications (GPS) Roundness Part 1: Vocabulary and parameters of roundness
    ISO 17450-1:2011 Geometrical product specifications (GPS) — General concepts — Part 1: Model for geometrical specification and verification
    BS EN ISO 10360-5:2010 Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM) CMMs using single and multiple stylus contacting probing systems
    UNE-EN ISO 13385-1:2012 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Callipers; Design and metrological characteristics (ISO 13385-1:2011)
    ISO 14405-3:2016 Geometrical product specifications (GPS) — Dimensional tolerancing — Part 3: Angular sizes
    ISO 10360-1:2000 Geometrical Product Specifications (GPS) — Acceptance and reverification tests for coordinate measuring machines (CMM) — Part 1: Vocabulary
    ISO/TS 12180-2:2003 Geometrical Product Specifications (GPS) Cylindricity Part 2: Specification operators
    ISO 10360-3:2000 Geometrical Product Specifications (GPS) Acceptance and reverification tests for coordinate measuring machines (CMM) Part 3: CMMs with the axis of a rotary table as the fourth axis
    ISO 11608-1:2014 Needle-based injection systems for medical use Requirements and test methods Part 1: Needle-based injection systems
    ISO 13385-2:2011 Geometrical product specifications (GPS) Dimensional measuring equipment Part 2: Calliper depth gauges; Design and metrological characteristics
    ISO 16610-85:2013 Geometrical product specifications (GPS) — Filtration — Part 85: Morphological areal filters: Segmentation
    ISO 2538-2:2014 Geometrical product specifications (GPS) Wedges Part 2: Dimensioning and tolerancing
    BS EN ISO 3650:1999 Geometrical product specifications (GPS). Length standards. Gauge blocks
    BS EN 1970:2000 Adjustable beds for disabled persons. Requirements and test methods
    UNE-EN ISO 10360-2:2010 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 2: CMMs used for measuring linear dimensions (ISO 10360-2:2009)
    I.S. EN ISO 10360-5:2010 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING MACHINES (CMM) - PART 5: CMMS USING SINGLE AND MULTIPLE STYLUS CONTACTING PROBING SYSTEMS
    BS EN ISO 1660:2017 Geometrical product specifications (GPS). Geometrical tolerancing. Profile tolerancing
    ISO 16610-41:2015 Geometrical product specifications (GPS) — Filtration — Part 41: Morphological profile filters: Disk and horizontal line-segment filters
    ISO 16610-31:2016 Geometrical product specifications (GPS) — Filtration — Part 31: Robust profile filters: Gaussian regression filters
    ISO 11137-3:2017 Sterilization of health care products — Radiation — Part 3: Guidance on dosimetric aspects of development, validation and routine control
    ISO 16610-71:2014 Geometrical product specifications (GPS) — Filtration — Part 71: Robust areal filters: Gaussian regression filters
    ISO 12780-1:2011 Geometrical product specifications (GPS) Straightness Part 1: Vocabulary and parameters of straightness
    BS EN ISO 10360-1:2001 Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM) Vocabulary
    ISO 25178-606:2015 Geometrical product specification (GPS) — Surface texture: Areal — Part 606: Nominal characteristics of non-contact (focus variation) instruments
    ISO 12179:2000 Geometrical Product Specifications (GPS) Surface texture: Profile method Calibration of contact (stylus) instruments
    ISO 10360-7:2011 Geometrical product specifications (GPS) Acceptance and reverification tests for coordinate measuring machines (CMM) Part 7: CMMs equipped with imaging probing systems
    DIN EN 12464-1:2011-08 Light and lighting - Lighting of work places - Part 1: Indoor work places
    EN ISO 16610-1:2015 Geometrical product specifications (GPS) - Filtration - Part 1: Overview and basic concepts (ISO 16610-1:2015)
    EN ISO 25178-606:2015 Geometrical product specification (GPS) - Surface texture: Areal - Part 606: Nominal characteristics of non-contact (focus variation) instruments (ISO 25178-606:2015)
    EN ISO 5436-2:2012 Geometrical product specifications (GPS) - Surface texture: Profile method; Measurement standards - Part 2: Software measurement standards (ISO 5436-2:2012)
    EN ISO 463:2006/AC:2009 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - DESIGN AND METROLOGICAL CHARACTERISTICS OF MECHANICAL DIAL GAUGES
    EN ISO 10360-7:2011 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 7: CMMs equipped with imaging probing systems (ISO 10360-7:2011)
    I.S. EN ISO 12179:2000 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - CALIBRATION OF CONTACT (STYLUS) INSTRUMENTS
    EN ISO 1660:2017 Geometrical product specifications (GPS) - Geometrical tolerancing - Profile tolerancing (ISO 1660:2017)
    EN ISO 10360-1:2000/AC:2002 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING MACHINES (CMM) - PART 1: VOCABULARY
    EN ISO 21649:2009 Needle-free injectors for medical use - Requirements and test methods (ISO 21649:2006)
    EN ISO 25178-1:2016 Geometrical product specifications (GPS) - Surface texture: Areal - Part 1: Indication of surface texture (ISO 25178-1:2016)
    EN ISO 5459:2011 Geometrical product specifications (GPS) - Geometrical tolerancing - Datums and datum systems (ISO 5459:2011)
    EN ISO 16610-85:2013 Geometrical product specifications (GPS) - Filtration- Part 85: Morphological areal filters: Segmentation (ISO 16610-85:2013)
    EN ISO 14253-5:2015 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 5: Uncertainty in verification testing of indicating measuring instruments (ISO 14253-5:2015)
    EN ISO 10360-2:2009 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 2: CMMs used for measuring linear dimensions (ISO 10360-2:2009)
    EN ISO 1101:2017 Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (ISO 1101:2017)
    EN ISO 139:2005/A1:2011 Textiles - Standard atmospheres for conditioning and testing - Amendment 1 (ISO 139:2005/AMD 1:2011)
    EN ISO 11608-5:2012 Needle-based injection systems for medical use - Requirements and test methods - Part 5: Automated functions (ISO 11608-5:2012)
    EN ISO 25178-3:2012 Geometrical product specifications (GPS) - Surface texture: Areal - Part 3: Specification operators (ISO 25178-3:2012)
    EN ISO 13385-1:2011 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Callipers; Design and metrological characteristics (ISO 13385-1:2011)
    EN ISO 9493:2010 Geometrical product specifications (GPS) - Dimensional measuring equipment: Dial test indicators (lever type) - Design and metrological characteristics (ISO 9493:2010)
    EN ISO 10360-4:2000/AC:2002 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING MACHINES (CMM) - PART 4: CMMS USED IN SCANNING MEASURING MODE
    EN ISO 3650:1998 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - LENGTH STANDARDS - GAUGE BLOCKS
    EN ISO 8015:2011 Geometrical product specifications (GPS) - Fundamentals - Concepts, principles and rules (ISO 8015:2011)
    EN ISO 16610-21:2012 Geometrical product specifications (GPS) - Filtration - Part 21: Linear profile filters: Gaussian filters (ISO 16610-21:2011)
    EN ISO 11137-3:2017 Sterilization of health care products - Radiation - Part 3: Guidance on dosimetric aspects of development, validation and routine control (ISO 11137-3:2017)
    EN ISO 25178-70 : 2014 GEOMETRICAL PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE: AREAL - PART 70: MATERIAL MEASURES (ISO 25178-70:2014)
    EN ISO 10360-3 : 2000 GEOMETRICAL PRODUCTS SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING MACHINES (CMM) - PART 3: CMMS WITH THE AXIS OF A ROTARY TABLE AS THE FOURTH AXIS (ISO 10360-3:2000)
    EN ISO 3040:2016 Geometrical product specifications (GPS) - Dimensioning and tolerancing - Cones (ISO 3040:2016)
    EN ISO 286-1:2010/AC:2013 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ISO CODE SYSTEM FOR TOLERANCES ON LINEAR SIZES - PART 1: BASIS OF TOLERANCES, DEVIATIONS AND FITS (ISO 286-1:2010/COR 1:2013)
    EN ISO 3611:2010 Geometrical product specifications (GPS) - Dimensional measuring equipment: Micrometers for external measurements - Design and metrological characteristics (ISO 3611:2010)
    EN ISO 16610-41:2015 Geometrical product specifications (GPS) - Filtration - Part 41: Morphological profile filters: Disk and horizontal line-segment filters (ISO 16610-41:2015)
    EN ISO 1119:2011 Geometrical product specifications (GPS) - Series of conical tapers and taper angles (ISO 1119:2011)
    EN ISO 17450-3:2016 Geometrical product specifications (GPS) - General concepts - Part 3: Toleranced features (ISO 17450-3:2016)
    EN ISO 2538-1:2014 Geometrical product specifications (GPS) - Wedges - Part 1: Series of angles and slopes (ISO 2538-1:2014)
    EN ISO 13225:2012 Geometrical product specifications (GPS) - Dimensional measuring equipment; Height gauges - Design and metrological characteristics (ISO 13225:2012)
    EN ISO 11608-1:2015 Needle-based injection systems for medical use - Requirements and test methods - Part 1: Needle-based injection systems (ISO 11608-1:2014)
    EN ISO 17450-2:2012 Geometrical product specifications (GPS) - General concepts - Part 2: Basic tenets, specifications, operators, uncertainties and ambiguities (ISO 17450-2:2012)
    EN ISO 10360-6:2001/AC:2008 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING MACHINES (CMM) - PART 6: ESTIMATION OF ERRORS IN COMPUTING GAUSSIAN ASSOCIATED FEATURES (ISO 10360-6:2001/Cor 1:2007)
    EN ISO 10360-9:2013 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 9: CMMs with multiple probing systems (ISO 10360-9:2013)
    EN ISO 25178-603:2013 Geometrical product specifications (GPS) - Surface texture: Areal - Part 603: Nominal characteristics of non-contact (phase-shifting interferometric microscopy) instruments (ISO 25178-603:2013)
    EN ISO 1938-1:2015 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Plain limit gauges of linear size (ISO 1938-1:2015)
    EN ISO 2538-2:2014 Geometrical product specifications (GPS) - Wedges - Part 2: Dimensioning and tolerancing (ISO 2538-2:2014)
    EN ISO 10360-8 : 2013 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING SYSTEMS (CMS) - PART 8: CMMS WITH OPTICAL DISTANCE SENSORS (ISO 10360-8:2013)
    EN ISO 16610-31:2016 Geometrical product specifications (GPS) - Filtration - Part 31: Robust profile filters: Gaussian regression filters (ISO 16610-31:2016)
    EN ISO 1938-2:2017 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Reference disk gauges (ISO 1938-2:2017)
    EN ISO 18391:2016 Geometrical product specifications (GPS) - Population specification (ISO 18391:2016)
    EN ISO 25178-604:2013 Geometrical product specifications (GPS) - Surface texture: Areal - Part 604: Nominal characteristics of non-contact (coherence scanning interferometry) instruments (ISO 25178-604:2013)
    I.S. EN ISO 4288:1998 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - RULES AND PROCEDURES FOR THE ASSESSMENT OF SURFACE TEXTURE
    EN ISO 16610-71:2014 Geometrical product specifications (GPS) - Filtration - Part 71: Robust areal filters: Gaussian regression filters (ISO 16610-71:2014)
    DIN EN ISO 1938-2 E : 2017 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 2: REFERENCE DISK GAUGES (ISO 1938-2:2017)
    DIN EN ISO 14405-3:2013-08 (Draft) GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 3: ANGULAR SIZES (ISO 14405-3:2016)
    UNE-EN ISO 13102:2013 Geometrical product specifications (GPS) - Dimensional measuring equipment: Electronic digital-indicator gauge - Design and metrological characteristics (ISO 13102:2012)
    PREN 12464-1 : DRAFT 2009 LIGHT AND LIGHTING - LIGHTING OF WORK PLACES - PART 1: INDOOR WORK PLACES
    UNI EN ISO 12181-1 : 2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ROUNDNESS - PART 1: VOCABULARY AND PARAMETERS OF ROUNDNESS
    DIN EN ISO 25178-604:2013-12 GEOMETRICAL PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE: AREAL - PART 604: NOMINAL CHARACTERISTICS OF NON-CONTACT (COHERENCE SCANNING INTERFEROMETRY) INSTRUMENTS (ISO 25178-604:2013)
    DIN EN ISO 16610-41 E : 2015 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 41: MORPHOLOGICAL PROFILE FILTERS: DISK AND HORIZONTAL LINE-SEGMENT FILTERS (ISO 16610-41:2015)
    BS EN ISO 25178-1:2016 Geometrical product specifications (GPS). Surface texture: Areal Indication of surface texture
    BS EN ISO 17450-1:2011 Geometrical product specifications (GPS). General concepts Model for geometrical specification and verification
    DIN EN ISO 1938-2:2017-05 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 2: REFERENCE DISK GAUGES (ISO 1938-2:2017)
    BS EN ISO 12180-2:2011 Geometrical product specifications (GPS). Cylindricity Specification operators
    DIN EN ISO 12181-2:2011-07 Geometrical product specifications (GPS) - Roundness - Part 2: Specification operators (ISO 12181-2:2011)
    DIN EN ISO 14638:2015-12 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - MATRIX MODEL (ISO 14638:2015)
    NF EN ISO 12781-2 : 2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FLATNESS - PART 2: SPECIFICATION OPERATORS
    DIN EN ISO 16610-71 E : 2014 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 71: ROBUST AREAL FILTERS: GAUSSIAN REGRESSION FILTERS (ISO 16610-71:2014)
    EN ISO 17450-4:2018 Geometrical product specifications (GPS) - Basic concepts - Part 4: Geometrical characteristics for quantifying GPS deviations (ISO 17450-4:2017)
    11/30231340 DC : 0 BS EN ISO 1938-1 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 1: PLAIN LIMIT GAUGES OF LINEAR SIZE
    ISO 13041-6:2009 Test conditions for numerically controlled turning machines and turning centres Part 6: Accuracy of a finished test piece
    13/30272933 DC : 0 BS EN ISO 14405-3 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 3: ANGULAR SIZES
    ENV ISO 14253-2 : DRAFT 2001 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENTS - PART 2: GUIDE TO THE ESTIMATION OF UNCERTAINTY IN GPS MEASUREMENT, IN CALIBRATION OF MEASURING EQUIPMENT AND IN PRODUCT VERIFICATION
    BS EN ISO 16610-1:2015 Geometrical product specifications (GPS). Filtration Overview and basic concepts
    08/30192849 DC : 0 BS ISO 5-2 - PHOTOGRAPHY AND GRAPHIC TECHNOLOGY - SPECTRAL DENSITY MEASUREMENTS - PART 2: GEOMETRIC CONDITIONS FOR TRANSMISSION DENSITY
    BS EN ISO 16610-31:2016 Geometrical product specifications (GPS). Filtration Robust profile filters: Gaussian regression filters
    BS EN ISO 1938-1:2015 Geometrical product specifications (GPS). Dimensional measuring equipment Plain limit gauges of linear size
    DIN EN ISO 16610-31:2015-09 (Draft) GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 31: ROBUST PROFILE FILTERS: GAUSSIAN REGRESSION FILTERS (ISO 16610-31:2016)
    DIN EN ISO 17450-2:2013-04 Geometrical product specifications (GPS) - General concepts - Part 2: Basic tenets, specifications, operators, uncertainties and ambiguities (ISO 17450-2:2012)
    10/30213842 DC : 0 BS EN ISO 11608-5 - NEEDLE-BASED INJECTION SYSTEMS FOR MEDICAL USE - REQUIREMENTS AND TEST METHODS - PART 5: AUTOMATED FUNCTIONS
    DIN EN ISO 17450-1:2012-04 Geometrical product specifications (GPS) - General concepts - Part 1: Model for geometrical specification and verification (ISO 17450-1:2011)
    12/30258651 DC : 0 BS ISO 492 - ROLLING BEARINGS - RADIAL BEARINGS - DIMENSIONAL AND GEOMETRICAL TOLERANCES
    BS EN ISO 16610-21:2012 Geometrical product specifications (GPS). Filtration Linear profile filters: Gaussian filters
    14/30299349 DC : 0 BS EN ISO 1938-2 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 2: REFERENCE DISK GAUGES
    BS EN ISO 5459:2011 Geometrical product specifications (GPS). Geometrical tolerancing. Datums and datum systems
    09/30206726 DC : DRAFT SEP 2009 BS EN 12464-1 - LIGHT AND LIGHTING - LIGHTING OF WORK PLACES - PART 1: INDOOR WORK PLACES
    UNI EN ISO 8015 : 2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FUNDAMENTALS - CONCEPTS, PRINCIPLES AND RULES
    DIN EN ISO 13385-2:2013-06 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 2: CALLIPER DEPTH GAUGES; DESIGN AND METROLOGICAL CHARACTERISTICS (ISO 13385-2:2011)
    96/704406 DC : 0 ISO/DIS 463 - GEOMETRICAL PRODUCT SPECIFICATION (GPS) - DIMENSIONAL MEASURING INSTRUMENTS - DIAL GAUGES - DESIGN AND METROLOGICAL REQUIREMENTS
    DIN EN ISO 10360-8:2014-03 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING SYSTEMS (CMS) - PART 8: CMMS WITH OPTICAL DISTANCE SENSORS (ISO 10360-8:2013)
    DIN EN ISO 16610-1:2015-11 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 1: OVERVIEW AND BASIC CONCEPTS (ISO 16610-1:2015)
    DD ISO/TS 23165:2006 Geometrical product specifications (GPS). Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty
    ISO 3650:1998 Geometrical Product Specifications (GPS) Length standards Gauge blocks
    13/30251870 DC : 0 BS EN ISO 14253-5 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENT - PART 5: UNCERTAINTY IN TESTING INDICATING MEASURING INSTRUMENTS
    DIN EN ISO 25178-3:2012-11 Geometrical product specifications (GPS) - Surface texture: Areal - Part 3: Specification operators (ISO 25178-3:2012); German version EN ISO 25178-3:2012
    04/30081057 DC : DRAFT AUG 2004 EN ISO 10535 - HOISTS FOR THE TRANSFER OF DISABLED PERSONS - REQUIREMENTS AND TEST METHODS
    CSA ISO/TR 10017:2003 GUIDANCE ON STATISTICAL TECHNIQUES FOR ISO 9001:2000
    BS ISO 3245:2015 Rolling bearings. Needle roller bearings with drawn cup and without inner ring. Boundary dimensions, geometrical product specifications (GPS) and tolerance values
    BS ISO 18653:2003 Gears. Evaluation of instruments for the measurement of individual gears
    BS ISO 5-4:2009 Photography and graphic technology. Density measurements Geometric conditions for reflection density
    PD ISO/TR 10064-5:2005 Code of inspection practice Recommendations relative to evaluation of gear measuring instruments
    ISO/TR 10017:2003 Guidance on statistical techniques for ISO 9001:2000
    BS ISO 12297-2:2018 Rolling bearings. Cylindrical rollers Boundary dimensions, geometrical product specifications (GPS) and tolerance values for ceramic rollers
    DIN CEN ISO/TS 8062-2;DIN SPEC 91184:2014-03 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES (ISO/TS 8062-2:2013)
    BS EN ISO 13385-1:2011 Geometrical product specifications (GPS). Dimensional measuring equipment Callipers; Design and metrological characteristics
    PREN ISO 11608-1 : DRAFT 2010 NEEDLE-BASED INJECTION SYSTEMS FOR MEDICAL USE - REQUIREMENTS AND TEST METHODS - PART 1: NEEDLE-BASED INJECTION SYSTEMS
    UNI EN ISO 9493 : 2010 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT: DIAL TEST INDICATORS (LEVER TYPE) - DESIGN AND METROLOGICAL CHARACTERISTICS
    I.S. EN ISO 25178-606:2015 GEOMETRICAL PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE: AREAL - PART 606: NOMINAL CHARACTERISTICS OF NON-CONTACT (FOCUS VARIATION) INSTRUMENTS (ISO 25178-606:2015)
    I.S. CEN ISO TS 12780-2:2007 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - STRAIGHTNESS - PART 2: SPECIFICATION OPERATORS
    I.S. EN ISO 1938-1:2015 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 1: PLAIN LIMIT GAUGES OF LINEAR SIZE (ISO 1938-1:2015)
    UNE-EN ISO 14253-2:2012 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification (ISO 14253-2:2011)
    I.S. EN ISO 10360-10:2016 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING SYSTEMS (CMS) - PART 10: LASER TRACKERS FOR MEASURING POINT-TO-POINT DISTANCES (ISO 10360-10:2016)
    I.S. EN ISO 14405-3:2017 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 3: ANGULAR SIZES (ISO/DIS 14405-3:2013)
    UNI EN ISO 14405-2 : 2012 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 2: DIMENSIONS OTHER THAN LINEAR SIZES
    UNI CEN ISO/TS 14253-4 : 2010 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENT - PART 4: BACKGROUND ON FUNCTIONAL LIMITS AND SPECIFICATION LIMITS IN DECISION RULES
    UNI EN ISO 13385-2 : 2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 2: CALLIPER DEPTH GAUGES - DESIGN AND METROLOGICAL CHARACTERISTICS
    I.S. EN ISO 12181-1:2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ROUNDNESS - PART 1: VOCABULARY AND PARAMETERS OF ROUNDNESS
    ISO 15872:2017 Aerospace — UNJ threads — Gauging
    BS EN ISO 25178-71:2017 Geometrical product specifications (GPS). Surface texture: Areal Software measurement standards
    BS EN ISO 14978:2006 Geometrical Product Specifications (GPS). General concepts and requirements for GPS measuring equipment
    I.S. EN ISO 8015:2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FUNDAMENTALS - CONCEPTS, PRINCIPLES AND RULES
    ISO/TS 21619:2018 Geometrical product specifications (GPS) — Types of documents with GPS
    BIS IS 16225-2 : 2014 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - CYLINDRICITY - PART 2: SPECIFICATION OPERATORS
    UNI EN ISO 25178-603 : 2013 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 603: NOMINAL CHARACTERISTICS OF NON-CONTACT (PHASE-SHIFTING INTERFEROMETRIC MICROSCOPY) INSTRUMENTS
    I.S. EN ISO 18391:2016 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - POPULATION SPECIFICATION (ISO 18391:2016)
    UNI EN ISO 16610-85 : 2013 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 85: MORPHOLOGICAL AREAL FILTERS: SEGMENTATION
    I.S. EN ISO 14253-5:2015 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENT - PART 5: UNCERTAINTY IN VERIFICATION TESTING OF INDICATING MEASURING INSTRUMENTS (ISO 14253-5:2015)
    EN ISO 14405-2:2011 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear sizes (ISO 14405-2:2011)
    BIS IS 16224-2 : 2014 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - STRAIGHTNESS - PART 2: SPECIFICATION OPERATORS
    S.R. CEN ISO TS 12781-2:2007 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FLATNESS - PART 2: SPECIFICATION OPERATORS
    ISO 1206:2018 Rolling bearings — Needle roller bearings with machined rings — Boundary dimensions, geometrical product specifications (GPS) and tolerance values
    EN ISO 10360-10:2016 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 10: Laser trackers for measuring point-to-point distances (ISO 10360-10:2016)
    UNI EN 12464-1 : 2011 LIGHT AND LIGHTING - LIGHTING OF WORK PLACES - PART 1: INDOOR WORK PLACES
    ISO 26303:2012 Machine tools Short-term capability evaluation of machining processes on metal-cutting machine tools
    CEN ISO/TS 8062-2 : 2013 COR 2014 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES (ISO/TS 8062-2:2013, CORRECTED VERSION 2013-11-01)
    DIN EN ISO 1119:2012-04 Geometrical product specifications (GPS) - Series of conical tapers and taper angles (ISO 1119:2011)
    DIN EN ISO 10535:2007-04 Hoists for the transfer of disabled persons - Requirements and test methods (ISO 10535:2006)
    DIN EN ISO 139 E : 2011 TEXTILES - STANDARD ATMOSPHERES FOR CONDITIONING AND TESTING (ISO 139:2005 + AMD.1:2011)
    ISO 12181-2:2011 Geometrical product specifications (GPS) Roundness Part 2: Specification operators
    ISO/TS 14253-3:2002 Geometrical Product Specifications (GPS) Inspection by measurement of workpieces and measuring equipment Part 3: Guidelines for achieving agreements on measurement uncertainty statements
    ISO 1101:2017 Geometrical product specifications (GPS) — Geometrical tolerancing — Tolerances of form, orientation, location and run-out
    BS EN 1071-1:2003 Advanced technical ceramics. Methods of test for ceramic coatings Determination of coating thickness by contact probe filometer
    BS EN ISO 11137-3:2017 Sterilization of health care products. Radiation Guidance on dosimetric aspects of development, validation and routine control
    ISO 10360-8:2013 Geometrical product specifications (GPS) — Acceptance and reverification tests for coordinate measuring systems (CMS) — Part 8: CMMs with optical distance sensors
    UNE-EN ISO 1119:2012 Geometrical product specifications (GPS) - Series of conical tapers and taper angles (ISO 1119:2011)
    ISO 10360-2:2009 Geometrical product specifications (GPS) Acceptance and reverification tests for coordinate measuring machines (CMM) Part 2: CMMs used for measuring linear dimensions
    ISO 11608-5:2012 Needle-based injection systems for medical use Requirements and test methods Part 5: Automated functions
    ISO 1938-2:2017 Geometrical product specifications (GPS) — Dimensional measuring equipment — Part 2: Reference disk gauges
    BS EN ISO 12179:2001 Geometrical product specifications (GPS). Surface texture. Profile method. Calibration of contact (stylus) instruments
    ISO/TS 8062-2:2013 Geometrical product specifications (GPS) — Dimensional and geometrical tolerances for moulded parts — Part 2: Rules
    ISO 12180-2:2011 Geometrical product specifications (GPS) Cylindricity Part 2: Specification operators
    BS EN ISO 10360-4:2001 Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM) CMMs used in scanning measuring mode
    BS EN ISO 11608-1:2015 Needle-based injection systems for medical use. Requirements and test methods Needle-based injection systems
    BS EN ISO 1119:2011 Geometrical product specifications (GPS). Series of conical tapers and taper angles
    ISO 12780-2:2011 Geometrical product specifications (GPS) Straightness Part 2: Specification operators
    ISO 12781-1:2011 Geometrical product specifications (GPS) Flatness Part 1: Vocabulary and parameters of flatness
    DIN EN ISO 463:2006-06 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - DESIGN AND METROLOGICAL CHARACTERISTICS OF MECHANICAL DIAL GAUGES
    EN ISO 4288 : 1997 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - RULES AND PROCEDURES FOR THE ASSESSMENT OF SURFACE TEXTURE
    EN ISO 12180-2:2011 Geometrical product specifications (GPS) - Cylindricity - Part 2: Specification operators (ISO 12180-2:2011)
    EN ISO 12180-1:2011 Geometrical product specifications (GPS) - Cylindricity - Part 1: Vocabulary and parameters of cylindrical form (ISO 12180-1:2011)
    EN ISO 17450-1:2011 Geometrical product specifications (GPS) - General concepts - Part 1: Model for geometrical specification and verification (ISO 17450-1:2011)
    DIN EN ISO 3611:2011-03 Geometrical product specifications (GPS) - Dimensional measuring equipment: Micrometers for external measurements - Design and metrological characteristics (ISO 3611:2010)
    EN ISO 12781-1:2011 Geometrical product specifications (GPS) - Flatness - Part 1: Vocabulary and parameters of flatness (ISO 12781-1:2011)
    DIN EN ISO 14405-3:2017-07 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 3: ANGULAR SIZES (ISO 14405-3:2016)
    DIN EN ISO 5436-2:2013-04 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD; MEASUREMENT STANDARDS - PART 2: SOFTWARE MEASUREMENT STANDARDS (ISO 5436-2:2012)
    CEN/TR 15235:2005 Welding - Methods for assessing imperfections in metallic structures
    CEN ISO/TS 14253-3:2007 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 3: Guidelines for achieving agreements on measurement uncertainty statements (ISO/TS 14253-3:2002)
    EN ISO 10535:2006 Hoists for the transfer of disabled persons - Requirements and test methods (ISO 10535:2006)
    EN ISO 12781-2:2011 Geometrical product specifications (GPS) - Flatness - Part 2: Specification operators (ISO 12781-2:2011)
    CEN ISO/TS 15530-1:2013 Geometrical product specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 1: Overview and metrological characteristics (ISO/TS 15530-1:2013)
    EN ISO 12181-2 : 2011 Geometrical product specifications (GPS) - Roundness - Part 2: Specification operators (ISO 12181-2:2011)
    EN ISO 1302 : 2002 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INDICATION OF SURFACE TEXTURE IN TECHNICAL PRODUCT DOCUMENTATION (ISO 1302:2002)
    DIN EN ISO 16610-31:2017-03 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 31: ROBUST PROFILE FILTERS: GAUSSIAN REGRESSION FILTERS (ISO 16610-31:2016)
    ASME B89.7.3.1 : 2001 : R2006 GUIDELINES FOR DECISION RULES: CONSIDERING MEASUREMENTS UNCERTAINTY IN DETERMINING CONFIRMATION TO SPECIFICATIONS
    ASME B89.7.3.1 : 2001 : R2011 GUIDELINES FOR DECISION RULES: CONSIDERING MEASUREMENTS UNCERTAINTY IN DETERMINING CONFIRMATION TO SPECIFICATIONS
    ASME B89.7.3.1 : 2001 GUIDELINES FOR DECISION RULES: CONSIDERING MEASUREMENTS UNCERTAINTY IN DETERMINING CONFIRMATION TO SPECIFICATIONS
    ASME B89.7.3.1 : 2001(R2019) GUIDELINES FOR DECISION RULES: CONSIDERING MEASUREMENTS UNCERTAINTY IN DETERMINING CONFIRMATION TO SPECIFICATIONS

    Standards Referencing This Book - (Show below) - (Hide below)

    ISO 8015:2011 Geometrical product specifications (GPS) Fundamentals Concepts, principles and rules
    ISO 14638:2015 Geometrical product specifications (GPS) Matrix model
    ISO 1938-1:2015 Geometrical product specifications (GPS) — Dimensional measuring equipment — Part 1: Plain limit gauges of linear size
    ISO/IEC Guide 98-4:2012 Uncertainty of measurement Part 4: Role of measurement uncertainty in conformity assessment
    ISO/IEC Guide 99:2007 International vocabulary of metrology Basic and general concepts and associated terms (VIM)
    ISO 3534-2:2006 Statistics Vocabulary and symbols Part 2: Applied statistics
    ISO 9000:2015 Quality management systems — Fundamentals and vocabulary
    ISO 14253-2:2011 Geometrical product specifications (GPS) — Inspection by measurement of workpieces and measuring equipment — Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification
    ISO 25378:2011 Geometrical product specifications (GPS) Characteristics and conditions Definitions
    ISO/IEC Guide 98-3:2008 Uncertainty of measurement — Part 3: Guide to the expression of uncertainty in measurement (GUM:1995)
    ISO 3534-1:2006 Statistics — Vocabulary and symbols — Part 1: General statistical terms and terms used in probability
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective