ISO 14720-2:2013
Current
The latest, up-to-date edition.
Testing of ceramic raw and basic materials — Determination of sulfur in powders and granules of non-oxidic ceramic raw and basic materials — Part 2: Inductively coupled plasma optical emission spectrometry (ICP/OES) or ion chromatography after burning in an oxygen flow
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
French, English
14-02-2013
This part of ISO 14720 defines a method for the determination of sulfur in powdered and granular non-oxidic ceramic raw materials and materials, which are completely oxidized at a higher temperature in an oxygen atmosphere, e.g. carbon and graphite materials.
For materials which are not completely oxidizable under these conditions, it is possible to determine sulfur that can be released under these conditions, e.g. the adherent sulfur.
This part of ISO 14720 is applicable for materials with mass fractions of sulfur ≤ 10 % and mass fractions of ash < 20 %, The defined method is limited for materials with mass fractions of barium < 10 mg/kg, because the sulfur bonded in barium sulfate is not detectable with this method.
For the lower detection limit of this method, a mass fraction of sulfur of 0,5 mg/kg in the case of inductively coupled plasma optical emission spectrometry (ICP/OES) and 5 mg/kg in the case of ion chromatography (IC) has to be considered as a recommended value.
Committee |
ISO/TC 33
|
DevelopmentNote |
Supersedes ISO/DIS 14720-2. (02/2013)
|
DocumentType |
Standard
|
Pages |
15
|
PublisherName |
International Organization for Standardization
|
Status |
Current
|
Standards | Relationship |
NF EN ISO 14720-2 : 2013 | Identical |
NBN EN ISO 14720-2 : 2013 | Identical |
NEN EN ISO 14720-2 : 2013 | Identical |
NS EN ISO 14720-2 : 2013 | Identical |
I.S. EN ISO 14720-2:2013 | Identical |
PN EN ISO 14720-2 : 2013 | Identical |
SN EN ISO 14720-2 : 2013 | Identical |
UNI EN ISO 14720-2 : 2013 | Identical |
UNE-EN ISO 14720-2:2013 | Identical |
BS EN ISO 14720-2:2013 | Identical |
EN ISO 14720-2:2013 | Identical |
DIN EN ISO 14720-2:2013-06 | Identical |
PNE-prEN ISO 14720-2 | Identical |
DIN EN ISO 1927-3:2013-03 | MONOLITHIC (UNSHAPED) REFRACTORY MATERIALS - PART 3: CHARACTERIZATION AS RECEIVED (ISO 1927-3:2012) |
17/30327875 DC : DRAFT JAN 2017 | BS ISO 16169 - PREPARATION OF SILICON CARBIDE AND SIMILAR MATERIALS FOR ANALYSIS BY ISO 12677 X-RAY FLUORESCENCE (XRF) - FUSED CAST-BEAD METHOD |
ISO 5725-4:1994 | Accuracy (trueness and precision) of measurement methods and results Part 4: Basic methods for the determination of the trueness of a standard measurement method |
ISO 11885:2007 | Water quality Determination of selected elements by inductively coupled plasma optical emission spectrometry (ICP-OES) |
ISO 10304-1:2007 | Water quality Determination of dissolved anions by liquid chromatography of ions Part 1: Determination of bromide, chloride, fluoride, nitrate, nitrite, phosphate and sulfate |
ISO 5725-2:1994 | Accuracy (trueness and precision) of measurement methods and results Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method |
ISO 21748:2017 | Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty evaluation |
ISO 26845:2008 | Chemical analysis of refractories General requirements for wet chemical analysis, atomic absorption spectrometry (AAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES) methods |
ISO 8656-1:1988 | Refractory products — Sampling of raw materials and unshaped products — Part 1: Sampling scheme |
ISO/IEC Guide 98-3:2008 | Uncertainty of measurement — Part 3: Guide to the expression of uncertainty in measurement (GUM:1995) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.