Skip to content
Please enter a keyword to search

  • ISO 1519:2011

    Current The latest, up-to-date edition.

    Paints and varnishes Bend test (cylindrical mandrel)

    Available format(s):  Hardcopy, PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

    Language(s):  French, English, Russian

    Published date:  06-01-2011

    Publisher:  International Organization for Standardization

    Add To Cart

    Abstract - (Show below) - (Hide below)

    ISO 1519:2011 specifies an empirical test procedure for assessing the resistance of a coating of paint, varnish or related product to cracking and/or detachment from a metal or plastics substrate when subjected to bending round a cylindrical mandrel under standard conditions.

    For a multi-coat system, each coat can be tested separately or the complete system can be tested.

    The method specified can be carried out

    • either as a pass/fail test, by carrying out the test with a single specified size of mandrel, to assess compliance with a particular requirement;
    • or by repeating the procedure using successively smaller mandrels to determine the diameter of the first mandrel over which the coating cracks and/or becomes detached from the substrate.

    Two types of apparatus are specified, type 1 being appropriate for use on test panels of thickness up to 0,3 mm, and type 2 for use on test panels of thickness up to 1,0 mm. Both types of apparatus have been found to give similar results with the same coating, but normally only one will be used for testing a given product.

    General Product Information - (Show below) - (Hide below)

    Development Note Supersedes ISO/FDIS 1519. (01/2011)
    Document Type Standard
    Publisher International Organization for Standardization
    Status Current
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    BS ISO/TS 12928:1999 Lubricants, industrial oils and related products (class L). Family R (products for temporary protection against corrosion). Guidelines for establishing specifications
    13/30283193 DC : 0 BS EN 3021 - AEROSPACE SERIES - MOLYBDENUM DISULPHIDE DRY FILM LUBRICANTS GRAPHITE FREE - TECHNICAL SPECIFICATIONS
    SAE AMS 3095 : 2004 PAINT: HIGH GLOSS FOR AIRLINE EXTERIOR SYSTEM
    DIN EN 15813:2011-06 Polymer modified bituminous thick coatings for waterproofing - Determination of flexibility at low temperatures
    DIN 55928-8:1994-07 PROTECTION OF STEEL STRUCTURES FROM CORROSION BY ORGANIC AND METALLIC COATINGS - PART 8: PROTECTION OF SUPPORTING THIN-WALLED BUILDING COMPONENTS FROM CORROSION
    ONORM EN 4687 : 2012 AEROSPACE SERIES - PAINTS AND VARNISHES - CHROMATE FREE NON CORROSION INHIBITING TWO COMPONENTS COLD CURING PRIMER FOR MILITARY APPLICATION
    BS EN 3021:2017 Aerospace series. Molybdenum disulphide dry film lubricants graphite and halogen free. Technical specification
    IEC 60404-12:1992 Magnetic materials - Part 12: Guide to methods of assessment of temperature capability of interlaminar insulation coatings
    02/122653 DC : DRAFT JUN 2002 BS EN ISO 6860 - PAINTS AND VARNISHES - BEND TEST (CONICAL MANDREL)
    PREN 2435-05 : 200P1 AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION RESISTANT CHROMATED TWO COMPONENT COLD CURING EPOXY PRIMER - PART 05: HIGH CORROSION RESISTANCE FOR MILITARY APPLICATION
    PREN 3021 : DRAFT 2015 AEROSPACE SERIES - MOLYBDENUM DISULPHIDE DRY FILM LUBRICANTS GRAPHITE AND HALOGEN FREE - TECHNICAL SPECIFICATION
    I.S. EN ISO 13076:2012 PAINTS AND VARNISHES - LIGHTING AND PROCEDURE FOR VISUAL ASSESSMENTS OF COATINGS (ISO 13076:2012)
    DIN EN 1396:2015-06 Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications
    BS EN 2436-006:2006 AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION RESISTANT CHROMATE-FREE TWO COMPONENT COLD CURING EPOXY PRIMER - PART 006: HIGH CORROSION RESISTANCE FOR MILITARY APPLICATION
    BS EN 12206-1:2004 Paints and varnishes. Coating of aluminium and aluminium alloys for architectural purposes Coatings prepared from coating powder
    UNE-EN 505:2013 Roofing products from metal sheet - Specification for fully supported roofing products of steel sheet
    BS EN 505:2013 Roofing products from metal sheet. Specification for fully supported roofing products of steel sheet
    EN 13438:2013 Paints and varnishes - Powder organic coatings for hot dip galvanised or sherardised steel products for construction purposes
    EN 61086-2:2004 Coatings for loaded printed wire boards (conformal coatings) - Part 2: Methods of test
    EN 10301:2003 Steel tubes and fittings for on and offshore pipelines - Internal coating for the reduction of friction for conveyance of non corrosive gas
    DIN EN ISO 13076:2012-10 PAINTS AND VARNISHES - LIGHTING AND PROCEDURE FOR VISUAL ASSESSMENTS OF COATINGS (ISO 13076:2012)
    NF EN ISO 15730 : 2016 METALLIC AND OTHER INORGANIC COATINGS - ELECTROPOLISHING AS A MEANS OF SMOOTHING AND PASSIVATING STAINLESS STEEL
    14/30289467 DC : 0 BS EN ISO 3248 - PAINTS AND VARNISHES - DETERMINATION OF THE EFFECT OF HEAT
    93/708490 DC : 0 PREN 3840 - AEROSPACE SERIES - PAINTS AND VARNISHES TECHNICAL SPECIFICATION
    DIN EN ISO 17132:2008-01 PAINTS AND VARNISHES - T-BEND TEST
    EN 12206-1:2004 Paints and varnishes - Coating of aluminium and aluminium alloys for architectural purposes - Part 1: Coatings prepared from coating powder
    BS EN 60464-2:2001 VARNISHES USED FOR ELECTRICAL INSULATION - PART 2: METHODS OF TEST
    ISO/TS 16688:2017 Guidelines for the selection of coating types, tests and methods of assessing the performance of coated aluminium in architectural applications
    10/30210875 DC : 0 BS EN ISO 13076 - PAINTS AND VARNISHES - LIGHTING AND PROCEDURE FOR VISUAL ASSESSMENTS
    ISO 8081:1985 Aerospace process Chemical conversion coating for aluminium alloys General purpose
    PREN 3840 : 200P2 AEROSPACE SERIES - PAINTS AND VARNISHES - TECHNICAL SPECIFICATION
    PREN 13523-7 : DRAFT 2012 COIL COATED METALS - TEST METHODS - PART 7: RESISTANCE TO CRACKING ON BENDING (T-BEND TEST)
    DIN EN 13438:2013-12 PAINTS AND VARNISHES - POWDER ORGANIC COATINGS FOR HOT DIP GALVANISED OR SHERARDISED STEEL PRODUCTS FOR CONSTRUCTION PURPOSES
    DIN EN 15088 E : 2006 ALUMINIUM AND ALUMINIUM ALLOYS - STRUCTURAL PRODUCTS FOR CONSTRUCTION WORKS - TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY
    DIN EN 505:2013-06 ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR FULLY SUPPORTED ROOFING PRODUCTS OF STEEL SHEET
    I.S. EN ISO 6860:2006 PAINTS AND VARNISHES - BEND TEST (CONICAL MANDREL)
    I.S. EN 13523-7:2014 COIL COATED METALS - TEST METHODS - PART 7: RESISTANCE TO CRACKING ON BENDING (T-BEND TEST)
    DIN EN 12206-1:2004-09 Paints and varnishes - Coating of aluminium and aluminium alloys for architectural purposes - Part 1: Coatings prepared from coating powder
    I.S. EN 505:2013 ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR FULLY SUPPORTED ROOFING PRODUCTS OF STEEL SHEET
    I.S. EN 1396:2015 ALUMINIUM AND ALUMINIUM ALLOYS - COIL COATED SHEET AND STRIP FOR GENERAL APPLICATIONS - SPECIFICATIONS
    UNI EN 4687 : 2013 AEROSPACE SERIES - PAINTS AND VARNISHES - CHROMATE FREE NON CORROSION INHIBITING TWO COMPONENTS COLD CURING PRIMER FOR MILITARY APPLICATION
    I.S. EN 13438:2013 PAINTS AND VARNISHES - POWDER ORGANIC COATINGS FOR HOT DIP GALVANISED OR SHERARDISED STEEL PRODUCTS FOR CONSTRUCTION PURPOSES
    EN 4687:2012 Aerospace series - Paints and varnishes - Chromate free non corrosion inhibiting two components cold curing primer for military application
    I.S. EN ISO 3248:2016 PAINTS AND VARNISHES - DETERMINATION OF THE EFFECT OF HEAT (ISO 3248:2016)
    BS 3900-G7(1998) : 1998 AMD 12096 METHODS OF TEST FOR PAINTS - DETERMINATION OF THE EFFECT OF HEAT
    03/310937 DC : DRAFT JUNE 2003 EN 2436-6 - AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION RESISTANT CHROMATE FREE TWO COMPONENT COLD CURING PRIMER - PART 6: HIGH CORROSION RESISTANCE FOR MILITARY APPLICATION
    09/30205302 DC : 0 BS EN 4687 - AEROSPACE SERIES - PAINTS AND VARNISHES - CHROMATE FREE (NON CORROSION INHIBITING) TWO COMPONENT COLD CURING PRIMER - CHROMAT FREE PRIMER FOR MILITARY APPLICATION
    12/30264367 DC : 0 BS EN 505 - ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR FULLY SUPPORTED ROOFING PRODUCTS OF STEEL SHEET
    UNE-EN 15813:2011 Polymer modified bituminous thick coatings for waterproofing - Determination of flexibility at low temperatures
    AEP-64 : 2012 PERFORMANCE REQUIREMENTS FOR PAINT SYSTEMS RESISTANT TO CHEMICAL AGENTS AND DECONTAMINANTS, FOR THE PROTECTION OF LAND MILITARY EQUIPMENT
    I.S. EN 61086-2:2004 COATINGS FOR LOADED PRINTED WIRE BOARDS (CONFORMAL COATINGS) - PART 2: METHODS OF TEST
    DIN EN 15813 E : 2011 POLYMER MODIFIED BITUMINOUS THICK COATINGS FOR WATERPROOFING - DETERMINATION OF FLEXIBILITY AT LOW TEMPERATURES
    PD ISO/TS 16688:2017 Guidelines for the selection of coating types, tests and methods of assessing the performance of coated aluminium in architectural applications
    98/711668 DC : DRAFT AUG 98 PREN 10301 - STEEL TUBES AND FITTINGS FOR ON AND OFFSHORE PIPELINES - INTERNAL COATING FOR THE REDUCTION OF FRICTION FOR CONVEYANCE OF NON CORROSIVE GAS
    BS 3900-E11(1985) : 1985 AMD 8612 METHODS OF TEST FOR PAINTS - MECHANICAL TESTS ON PAINT FILMS - BEND TEST (CONICAL MANDREL)
    13/30286946 DC : 0 BS EN 1396 - ALUMINIUM AND ALUMINIUM ALLOYS - COIL COATED SHEET AND STRIP FOR GENERAL APPLICATIONS - SPECIFICATIONS
    I.S. EN 3021:2017 AEROSPACE SERIES - MOLYBDENUM DISULPHIDE DRY FILM LUBRICANTS GRAPHITE AND HALOGEN FREE - TECHNICAL SPECIFICATION
    17/30364785 DC : 0 BS EN 4868 - AEROSPACE SERIES - ANODIC ELECTRODEPOSITION OF PRIMER
    BS EN ISO 13076:2012 PAINTS AND VARNISHES - LIGHTING AND PROCEDURE FOR VISUAL ASSESSMENTS OF COATINGS
    BS EN 61086-2:2004 Coatings for loaded printed wire boards (conformal coatings) Methods of test
    UNI EN ISO 13076 : 2012 PAINTS AND VARNISHES - LIGHTING AND PROCEDURE FOR VISUAL ASSESSMENTS OF COATINGS
    PREN 2436-06 : 200P1 AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION RESISTANT CHROMATE-FREE TWO COMPONENT COLD CURING EPOXY PRIMER - PART 06: HIGH CORROSION RESISTANCE FOR MILITARY APPLICATION
    PREN 2434-05 : 200P1 AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - PART 05: HIGH FLEXIBILITY AND CHEMICAL AGENT RESISTANCE FOR MILITARY APPLICATION
    PREN 505 : DRAFT 2012 ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR FULLY SUPPORTED ROOFING PRODUCTS OF STEEL SHEET
    CEI EN 61086-2 : 2005 COATINGS FOR LOADED PRINTED WIRE BOARDS (CONFORMAL COATINGS) - PART 2: METHODS OF TEST
    I.S. EN 60464-2:2002 VARNISHES USED FOR ELECTRICAL INSULATION - PART 2: METHODS OF TEST
    DIN EN ISO 6860:2006-06 Paints and varnishes - Bend test (conical mandrel) (ISO 6860:2006)
    UNE-EN ISO 3248:2017 Paints and varnishes - Determination of the effect of heat (ISO 3248:2016)
    ISO 17132:2007 Paints and varnishes T-bend test
    BS EN 1396:2007 ALUMINIUM AND ALUMINIUM ALLOYS - COIL COATED SHEET AND STRIP FOR GENERAL APPLICATIONS - SPECIFICATIONS
    ISO 3248:2016 Paints and varnishes Determination of the effect of heat
    UNE-EN ISO 13076:2013 Paints and varnishes - Lighting and procedure for visual assessments of coatings (ISO 13076:2012)
    EN ISO 17132:2007 Paints and varnishes - T-bend test (ISO 17132:2007)
    UNI EN 505 : 2013 ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR FULLY SUPPORTED ROOFING PRODUCTS OF STEEL SHEET
    EN ISO 6860:2006 Paints and varnishes - Bend test (conical mandrel) (ISO 6860:2006)
    UNI EN 13438 : 2013 PAINTS AND VARNISHES - POWDER ORGANIC COATINGS FOR HOT DIP GALVANISED OR SHERARDIZED STEEL PRODUCTS FOR CONSTRUCTION PURPOSES
    I.S. EN 3840:2007 AEROSPACE SERIES - PAINTS AND VARNISHES - TECHNICAL SPECIFICATION
    PREN 13438 : DRAFT 2012 PAINTS AND VARNISHES - POWDER ORGANIC COATINGS FOR GALVANIZED OR SHERARDIZED STEEL PRODUCTS FOR CONSTRUCTION PURPOSES
    09/30205293 DC : 0 BS EN 4687 - AEROSPACE SERIES - PAINTS AND VARNISHES - CHROMATE FREE (NON CORROSION INHIBITING) TWO COMPONENT COLD CURING PRIMER - CHROMAT FREE PRIMER FOR MILITARY APPLICATION
    09/30205299 DC : 0 BS EN 4688 - AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION RESISTANT CHROMATED TWO COMPONENT COLD CURING EPOXY PRIMER - HIGH CORROSION RESISTANCE FOR MILITARY APPLICATION
    12/30259634 DC : 0 BS ISO 15399 - GASEOUS HYDROGEN - CYLINDERS AND TUBES FOR STATIONARY STORAGE
    UNI EN 15813 : 2011 POLYMER MODIFIED BITUMINOUS THICK COATINGS FOR WATERPROOFING - DETERMINATION OF FLEXIBILITY AT LOW TEMPERATURES
    I.S. EN ISO 17132:2007 PAINTS AND VARNISHES - T-BEND TEST
    DIN EN 13523-7:2014-08 Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test)
    UNE-EN 1396:2015 Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications
    ISO 13076:2012 Paints and varnishes Lighting and procedure for visual assessments of coatings
    ISO 6860:2006 Paints and varnishes Bend test (conical mandrel)
    BS EN 10301:2003 Steel tubes and fittings for on and offshore pipelines. Internal coating for the reduction of friction for conveyance of non corrosive gas
    IEC 60464-2:2001+AMD1:2006 CSV Varnishes used for electrical insulation - Part 2: Methods of test
    IEC 61086-2:2004 Coatings for loaded printed wire boards (conformal coatings) - Part 2: Methods of test
    BS EN 13438:2013 Paints and varnishes. Powder organic coatings for hot dip galvanised or sherardised steel products for construction purposes
    DIN EN 15088:2016-09 (Draft) Aluminium and aluminium alloys - Structural products for construction works - Technical conditions for inspection and delivery; German and English version prEN 15088:2016
    BS EN 2435-005:2006 Aerospace series. Paints and varnishes. Corrosion resistant chromated two component cold curing primer High corrosion resistance for military application
    BS EN 15088:2005 ALUMINIUM AND ALUMINIUM ALLOYS - STRUCTURAL PRODUCTS FOR CONSTRUCTION WORKS - TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY
    BS EN ISO 3248:2001 PAINTS AND VARNISHES - DETERMINATION OF THE EFFECT OF HEAT (ISO 3248:2016)
    BS EN ISO 6860:2006 Paints and varnishes. Bend test (conical mandrel)
    EN ISO 13076:2012 Paints and varnishes - Lighting and procedure for visual assessments of coatings (ISO 13076:2012)
    EN ISO 3248:2016 Paints and varnishes - Determination of the effect of heat (ISO 3248:2016)
    EN 15088:2005 Aluminium and aluminium alloys - Structural products for construction works - Technical conditions for inspection and delivery
    EN 1396:2015 Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications
    EN 15813:2011 Polymer modified bituminous thick coatings for waterproofing - Determination of flexibility at low temperatures
    EN 505:2013 Roofing products from metal sheet - Specification for fully supported roofing products of steel sheet
    EN 3840:2007 Aerospace series - Paints and varnishes - Technical specification
    EN 2434-005:2006 Aerospace series - Paints and varnishes - Two component cold curing polyurethane finish - Part 005: High flexibility and chemical agent resistance for military application
    EN 2435-005:2006 Aerospace series - Paints and varnishes - Corrosion resistant chromated two component cold curing primer - Part 005: High corrosion resistance for military application
    EN 2436-006:2006 Aerospace series - Paints and varnishes - Corrosion resistant chromate-free two component cold curing epoxy primer - Part 006: High corrosion resistance for military application
    EN 3021:2017 Aerospace series - Molybdenum disulphide dry film lubricants graphite and halogen free - Technical specification
    12/30238456 DC : 0 BS EN 13438 - PAINTS AND VARNISHES - POWDER ORGANIC COATINGS FOR GALVANIZED OR SHERARDIZED STEEL PRODUCTS FOR CONSTRUCTION PURPOSES
    12/30268961 DC : 0 BS EN 13523-7 - COIL COATED METALS - TEST METHODS - PART 7: RESISTANCE TO CRACKING ON BENDING (T-BEND TEST)
    STANAG 2836 : 0 REMOVABLE PAINTS FOR CAMOUFLAGE
    DIN EN 3840:2007-10 Aerospace series - Paints and varnishes - Technical specification; German and English version EN 3840:2007
    BS EN 15813:2011 Polymer modified bituminous thick coatings for waterproofing. Determination of flexibility at low temperatures
    ONORM EN 4689 : 2012 AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENTS COLD CURING POLYURETHANE FINISH - HIGH FLEXIBILITY AND CHEMICAL AGENT RESISTANCE FOR MILITARY APPLICATION
    BS EN ISO 17132:2007 Paints and varnishes. T-bend test
    I.S. EN 15813:2011 POLYMER MODIFIED BITUMINOUS THICK COATINGS FOR WATERPROOFING - DETERMINATION OF FLEXIBILITY AT LOW TEMPERATURES
    04/30125694 DC : DRAFT NOV 2004 EN 15088 - ALUMINIUM AND ALUMINIUM ALLOYS - STRUCTURAL PRODUCTS FOR CONSTRUCTION WORKS - TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY
    BS EN 3840:2007 AEROSPACE SERIES - PAINTS AND VARNISHES - TECHNICAL SPECIFICATION
    I.S. EN 4687:2012 AEROSPACE SERIES - PAINTS AND VARNISHES - CHROMATE FREE NON CORROSION INHIBITING TWO COMPONENTS COLD CURING PRIMER FOR MILITARY APPLICATION
    PREN 1396 : DRAFT 2013 ALUMINIUM AND ALUMINIUM ALLOYS - COIL COATED SHEET AND STRIP FOR GENERAL APPLICATIONS - SPECIFICATIONS
    BS EN 2434-005 : 2006 AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - PART 005: HIGH FLEXIBILITY AND CHEMICAL AGENT RESISTANCE FOR MILITARY APPLICATION
    BS EN 13523-7:2014 Coil coated metals. Test methods Resistance to cracking on bending (T-bend test)
    EN 13523-7:2014 Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test)
    EN 60464-2:2001/A1:2006 VARNISHES USED FOR ELECTRICAL INSULATION - PART 2: METHODS OF TEST
    UNI EN 13523-7 : 2014 COIL COATED METALS - TEST METHODS - PART 7: RESISTANCE TO CRACKING ON BENDING (T-BEND TEST)
    DIN EN 15088:2006-03 Aluminium and aluminium alloys - Structural products for construction works - Technical conditions for inspection and delivery; German version EN 15088:2005

    Standards Referencing This Book - (Show below) - (Hide below)

    ISO 1514:2016 Paints and varnishes — Standard panels for testing
    ISO 2808:2007 Paints and varnishes Determination of film thickness
    ISO 15528:2013 Paints, varnishes and raw materials for paints and varnishes Sampling
    ISO 1513:2010 Paints and varnishes Examination and preparation of test samples
    ISO 3270:1984 Paints and varnishes and their raw materials — Temperatures and humidities for conditioning and testing
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective