ISO 16084:2017
Current
The latest, up-to-date edition.
Balancing of rotating tools and tool systems
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
French, English
25-10-2017
Important note : Users cannot be edited or removed once added to your Multi user PDF.
ISO 16084:2017 specifies requirements and provides calculations for the permissible static and dynamic residual unbalances of rotating single tools and tool systems. It is based on the guideline that unbalance related centrifugal forces induced by the rotational speed do not harm the spindle bearings, as well as prevent unbalance related impairments of machining processes, tool life and work piece quality.
NOTE 1 Tools and tool systems covered by ISO 16084:2017 are, for example, those with hollow taper interfaces (HSK) according to ISO 12164-1 and ISO 12164-2, modular taper interface with ball track system according to the ISO 26622 series polygonal taper interface according to the ISO 26623 series, taper 7/24 according to ISO 7388-1, ISO 7388-2, ISO 9270-1 and ISO 9270-2 related to their individual operating speed.
Modular tool systems are another important and complex issue of ISO 16084:2017. Calculations and process descriptions for balancing these components and the assembled tool systems are included.
ISO 16084:2017 is putting an important focus on the possible clamping dislocations of tool shanks and their effects on the balancing procedure. These dislocations can occur between a tool or a tool system and the machine tool spindle (e.g. with every tool change), as well as within a modular tool system during its assembly.
NOTE 2 Unfavourable process or system conditions (e.g. partial resonances of the machine structure generated by particular rotational speeds) or design and machine-related technical conditions (e.g. the projecting length of the axes, narrow space conditions, vibration susceptible devices, clamping devices and tool design) may lead to increased vibration loads and balancing requirements. This is dependent on the individual interaction of the machine and the tool spindle system and cannot be covered by a standard. A deviation from the recommended limit values of ISO 16084:2017 can be required in individual cases.
NOTE 3 Wear of the shank interfaces may lead to possible variations of the clamping situation and thus to worse run-out and balancing conditions. These errors cannot be specifically addressed in a standard.
| Committee |
ISO/TC 29
|
| DevelopmentNote |
Supersedes ISO/DIS 16084. (10/2017)
|
| DocumentType |
Standard
|
| Pages |
75
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Standards | Relationship |
| BS ISO 16084:2017 | Identical |
| NEN ISO 16084 : 2017 | Identical |
| ISO 7388-2:2007 | Tool shanks with 7/24 taper for automatic tool changers — Part 2: Dimensions and designation of shanks of forms J, JD and JF |
| ISO 9270-2:2010 | 7/24 taper spindle noses for automatic tool changers Part 2: Dimensions and designation of spindle noses of forms J and JF |
| EN 847-3:2013 | Tools for woodworking - Safety requirements - Part 3: Clamping devices |
| ISO 21940-14:2012 | Mechanical vibration — Rotor balancing — Part 14: Procedures for assessing balance errors |
| ISO 26623-1:2014 | Polygonal taper interface with flange contact surface Part 1: Dimensions and designation of shanks |
| ISO 26623-2:2014 | Polygonal taper interface with flange contact surface Part 2: Dimensions and designation of receivers |
| ISO 1940-1:2003 | Mechanical vibration Balance quality requirements for rotors in a constant (rigid) state Part 1: Specification and verification of balance tolerances |
| ISO 12164-2:2001 | Hollow taper interface with flange contact surface — Part 2: Receivers — Dimensions |
| ISO 21940-21:2012 | Mechanical vibration — Rotor balancing — Part 21: Description and evaluation of balancing machines |
| ISO 15641:2001 | Milling cutters for high speed machining — Safety requirements |
| ISO 1925:2001 | Mechanical vibration Balancing Vocabulary |
| ISO 26622-2:2008 | Modular taper interface with ball track system — Part 2: Dimensions and designation of receivers |
| ISO 19499:2007 | Mechanical vibration Balancing Guidance on the use and application of balancing standards |
| EN 847-2:2017 | Tools for woodworking - Safety requirements - Part 2: Requirements for the shank of shank mounted milling tools/circular saw blades |
| ISO 7388-1:2007 | Tool shanks with 7/24 taper for automatic tool changers Part 1: Dimensions and designation of shanks of forms A, AD, AF, U, UD and UF |
| ISO 12164-1:2001 | Hollow taper interface with flange contact surface — Part 1: Shanks — Dimensions |
| EN 847-1:2017 | Tools for woodworking - Safety requirements - Part 1: Milling tools, circular saw blades |
| ISO 26622-1:2017 | Modular taper interface with ball track system — Part 1: Dimensions and designation of shanks |
| ISO 9270-1:2010 | 7/24 taper spindle noses for automatic tool changers Part 1: Dimensions and designation of spindle noses of forms S and SF |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.