ISO 1622-2:1995
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
Plastics — Polystyrene (PS) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
Available format(s)
Hardcopy , PDF
Language(s)
English, French
Published date
27-04-1995
Withdrawn date
09-04-2025
Superseded by
€63.00
Excluding VAT
Cancels and replaces the first edition (1980). Specifies the methods of preparation of test specimens and the test methods to be used in determining the properties of PS moulding and extrusion materials. Gives requirements for handling test material and for conditioning both the test material before moulding and the specimens before testing. Gives procedures and conditions for the preparation of test specimens and procedures for measuring properties of the materials from which these specimens are made. Lists properties and test methods which are suitable and necessary to characterize PS moulding and extrusion materials.
| Committee |
ISO/TC 61/SC 9
|
| DevelopmentNote |
DRAFT FOR COMMENT 91/38549 DC Supersedes ISO 1622 (04/2001)
|
| DocumentType |
Standard
|
| Pages |
5
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| NF EN ISO 1622-2 : 1999 | Identical |
| NBN EN ISO 1622-2 : 1ED 99 | Identical |
| NEN ISO 1622-2 : 1995 | Identical |
| NEN EN ISO 1622-2 : 1999 | Identical |
| NS EN ISO 1622-2 : 1ED 1999 | Identical |
| I.S. EN ISO 1622-2:1999 | Identical |
| PN EN ISO 1622-2 : 2000 | Identical |
| BS ISO 1622-2 : 1995 AMD 10649 | Identical |
| BS EN ISO 1622-2:1999 | Identical |
| EN ISO 1622-2:1999 | Identical |
| DIN EN ISO 1622-2:1999-10 | Identical |
| DIN 7741-2:1988-12 | Similar to |
| NFT 51 912 : 1980 | Similar to |
| UNE-EN ISO 1622-2:2000 | Identical |
| BS 1493:1987 | Similar to |
| ONORM EN ISO 1622-1 : 2012 | PLASTICS - POLYSTYRENE (PS) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS (ISO 1622-1:2012) |
| DIN EN ISO 1133:2000-02 | PLASTICS - DETERMINATION OF THE MELT MASS-FLOW RATE (MFR) AND THE MELT VOLUME-FLOW RATE (MVR) OF THE THERMOPLASTICS |
| DIN EN ISO 1133:2005-09 | PLASTICS - DETERMINATION OF THE MELT MASS-FLOW RATE (MFR) AND THE MELT VOLUME-FLOW RATE (MVR) OF THERMOPLASTICS |
| BS 1493:1987 | Method of specifying general purpose polystyrene (PS) moulding and extrusion materials |
| I.S. EN ISO 1622-1:2012 | PLASTICS - POLYSTYRENE (PS) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS (ISO 1622-1:2012) |
| I.S. EN ISO 1133:2005 | PLASTICS - DETERMINATION OF THE MELT-MASS-FLOW RATE (MFR) AND THE MELT VOLUME-FLOW RATE (MVR) OF THE THERMOPLASTICS |
| ASTM D 4549 : 2015 : REDLINE | Standard Classification System and Basis for Specification for Polystyrene and Rubber-Modified Polystyrene Molding and Extrusion Materials (PS) |
| DIN EN ISO 1622-1:2012-05 | PLASTICS - POLYSTYRENE (PS) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS (ISO 1622-1:2012) |
| BS EN ISO 1622-1:2012 | Plastics. Polystyrene (PS) moulding and extrusion materials Designation system and basis for specifications |
| BS ISO 1622-1 : 1994 AMD 10645 | PLASTICS - POLYSTYRENE (PS) MOULDING AND EXTRUSION MATERIALS - DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS |
| BS EN ISO 1133:2005 | Plastics. Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics |
| ISO 1133:2005 | Plastics — Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics |
| ISO 1622-1:2012 | Plastics — Polystyrene (PS) moulding and extrusion materials — Part 1: Designation system and basis for specifications |
| EN ISO 1133:2005 | Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics (ISO 1133:2005) |
| EN ISO 1622-1:2012 | Plastics - Polystyrene (PS) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 1622-1:2012) |
| 10/30211415 DC : 0 | BS ISO 1622-1 - PLASTICS - POLYSTYRENE (PS) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS |
| IEC 60243-1:2013 | Electric strength of insulating materials - Test methods - Part 1: Tests at power frequencies |
| IEC 60112:2003+AMD1:2009 CSV | Method for the determination of the proof and the comparative tracking indices of solid insulating materials |
| ISO 4589-3:2017 | Plastics — Determination of burning behaviour by oxygen index — Part 3: Elevated-temperature test |
| ISO 1622-1:2012 | Plastics — Polystyrene (PS) moulding and extrusion materials — Part 1: Designation system and basis for specifications |
| ISO 75-1:2013 | Plastics — Determination of temperature of deflection under load — Part 1: General test method |
| ISO 293:2004 | Plastics — Compression moulding of test specimens of thermoplastic materials |
| ISO 3167:2014 | Plastics — Multipurpose test specimens |
| IEC 60250:1969 | Recommended methods for the determination of the permittivity and dielectric dissipation factor of electrical insulating materials at power, audio and radio frequencies including metre wavelengths |
| ISO 294:1995 | Plastics — Injection moulding of test specimens of thermoplastic materials |
| ISO 8256:2004 | Plastics — Determination of tensile-impact strength |
| ISO 10350:1993 | Plastics — Acquisition and presentation of comparable single-point data |
| ISO 75-2:2013 | Plastics — Determination of temperature of deflection under load — Part 2: Plastics and ebonite |
| ISO 527-2:2012 | Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics |
| ISO 489:1999 | Plastics — Determination of refractive index |
| ISO 1183:1987 | Plastics — Methods for determining the density and relative density of non-cellular plastics |
| IEC 60296:2012 RLV | Fluids for electrotechnical applications - Unused mineral insulating oils for transformers and switchgear |
| IEC 60093:1980 | Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials |
| ISO 1210:1992 | Plastics — Determination of the burning behaviour of horizontal and vertical specimens in contact with a small-flame ignition source |
| ISO 2561:2012 | Plastics — Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography |
| ISO 291:2008 | Plastics — Standard atmospheres for conditioning and testing |
| ISO 62:2008 | Plastics — Determination of water absorption |
| ISO 306:2013 | Plastics — Thermoplastic materials — Determination of Vicat softening temperature (VST) |
| ISO 4589-2:2017 | Plastics — Determination of burning behaviour by oxygen index — Part 2: Ambient-temperature test |
| ISO 179:1993 | Plastics — Determination of Charpy impact strength |
| ISO 2818:1994 | Plastics — Preparation of test specimens by machining |
| ISO 899-1:2017 | Plastics — Determination of creep behaviour — Part 1: Tensile creep |
| ISO 178:2010 | Plastics — Determination of flexural properties |
| ISO 1133:2005 | Plastics — Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics |
| IEC 61006:2004 | Electrical insulating materials - Methods of test for the determination of the glass transition temperature |
| ISO 527-1:2012 | Plastics — Determination of tensile properties — Part 1: General principles |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.