ISO 16486-4:2016
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
Plastics piping systems for the supply of gaseous fuels — Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 4: Valves
Hardcopy , PDF
English
02-06-2016
09-04-2025
ISO 16486-4:2016 specifies the characteristics of valves made from unplasticized polyamide (PA-U) in accordance with ISO 16486‑1, intended to be buried and used for the supply of gaseous fuels.
Valves made from other material than unplasticized polyamide designed for the supply of gaseous fuels conforming to the relevant standards are permitted to be used in PA-U piping system according to ISO 16486 provided they have relevant PA-U connections for butt fusion or electrofusion ends (see ISO 16486‑3). The component, i.e. the complete valve, shall fulfil the requirements of this part of ISO 16486.
It also specifies the test parameters for the test methods referred to in this part of ISO 16486.
It is applicable to bi-directional valves with spigot end or electrofusion socket intended to be jointed with PA-U pipes conforming to ISO 16486‑2 without any fittings or with PA-U fittings conforming to ISO 16486‑3.
ISO 16486-4:2016 covers valves for pipes with a nominal outside diameter, dn, ≤250 mm.
| Committee |
ISO/TC 138/SC 7
|
| DevelopmentNote |
Supersedes ISO/DIS 16486-4. (06/2016)
|
| DocumentType |
Standard
|
| Pages |
17
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy |
| Standards | Relationship |
| NEN ISO 16486-4 : 2016 | Identical |
| DIN ISO 16486-4 E : 2016 | Identical |
| DIN ISO 16486-4:2015-07 (Draft) | Identical |
| DIN ISO 16486-4:2016-11 | Identical |
| ABNT NBR ISO 16486-4:2018 | Identical |
| ISO 16486-6:2012 | Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 6: Code of practice for design, handling and installation |
| ISO 8233:1988 | Thermoplastics valves — Torque — Test method |
| ISO 16486-5:2012 | Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 5: Fitness for purpose of the system |
| EN 1705:1996 | Plastics piping systems - Thermoplastics valves - Test method for the integrity of a valve after an external blow |
| ISO 5210:2017 | Industrial valves — Multi-turn valve actuator attachments |
| ISO 3127:1994 | Thermoplastics pipes — Determination of resistance to external blows — Round-the-clock method |
| EN 12119:1997 | Plastics piping systems - Polyethylene (PE) valves - Test method for resistance to thermal cycling |
| ISO 16486-3:2012 | Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 3: Fittings |
| ISO 1167-4:2007 | Thermoplastics pipes, fittings and assemblies for the conveyance of fluids — Determination of the resistance to internal pressure — Part 4: Preparation of assemblies |
| EN 1704:1997 | Plastics piping systems - Thermoplastics valves - Test method for the integrity of a valve after temperature cycling under bending |
| ISO 16010:2005 | Elastomeric seals — Material requirements for seals used in pipes and fittings carrying gaseous fuels and hydrocarbon fluids |
| ISO 9393-1:2004 | Thermoplastics valves for industrial applications — Pressure test methods and requirements — Part 1: General |
| EN 12100:1997 | Plastics piping systems - Polyethylene (PE) valves - Test method for resistance to bending between supports |
| EN 736-2:2016 | Valves - Terminology - Part 2: Definition of components of valves |
| ISO 3126:2005 | Plastics piping systems — Plastics components — Determination of dimensions |
| EN 1680:1997 | Plastics piping systems - Valves for polyethylene (PE) piping systems - Test method for leaktightness under and after bending applied to the operating mechanisms |
| ISO 307:2007 | Plastics — Polyamides — Determination of viscosity number |
| ISO 291:2008 | Plastics — Standard atmospheres for conditioning and testing |
| ISO 16486-2:2012 | Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 2: Pipes |
| ISO 16486-1:2012 | Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 1: General |
| ISO 17778:2015 | Plastics piping systems — Fittings, valves and ancillaries — Determination of gaseous flow rate/pressure drop relationships |
| EN 736-3:2008 | Valves - Terminology - Part 3: Definition of terms |
| ISO 1167-1:2006 | Thermoplastics pipes, fittings and assemblies for the conveyance of fluids — Determination of the resistance to internal pressure — Part 1: General method |
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.