ISO 16811:2012
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Non-destructive testing — Ultrasonic testing — Sensitivity and range setting
Available format(s)
Hardcopy , PDF
Language(s)
English, French
Published date
23-03-2012
Superseded date
05-03-2025
Superseded by
€63.00
Excluding VAT
ISO 16811:2012 specifies the general rules for setting the timebase range and sensitivity (i.e. gain adjustment) of a manually operated ultrasonic flaw detector with A-scan display in order that reproducible measurements may be made of the location and echo height of a reflector.
ISO 16811:2012 is applicable to techniques employing a single contact probe with either a single or twin transducers, but excludes the immersion technique and techniques employing more than one probe.
| Committee |
ISO/TC 135/SC 3
|
| DevelopmentNote |
Supersedes ISO/DIS 16811. (03/2012)
|
| DocumentType |
Standard
|
| Pages |
38
|
| PublisherName |
International Organization for Standardization
|
| Status |
Superseded
|
| SupersededBy | |
| UnderRevision |
| Standards | Relationship |
| NF EN ISO 16811 : 2014 | Identical |
| NBN EN ISO 16811 : 2014 | Identical |
| NEN EN ISO 16811 : 2014 | Identical |
| NS EN ISO 16811 : 2014 | Identical |
| I.S. EN ISO 16811:2014 | Identical |
| PN EN ISO 16811 : 2014 | Identical |
| SS-EN ISO 16811:2014 | Identical |
| BS EN ISO 16811:2014 | Identical |
| EN ISO 16811:2014 | Identical |
| DIN EN ISO 16811:2014-06 | Identical |
| DIN EN ISO 16811 E : 2014 | Identical |
| ONORM EN ISO 16811 : 2014 | Identical |
| DS EN ISO 16811 : 2014 | Identical |
| UNE-EN ISO 16811:2014 | Identical |
| DIN EN ISO 16827:2014-06 | Non-destructive testing - Ultrasonic testing - Characterization and sizing of discontinuities (ISO 16827:2012) |
| DIN EN ISO 16810 E : 2014 | NON-DESTRUCTIVE TESTING - ULTRASONIC TESTING - GENERAL PRINCIPLES (ISO 16810:2012) |
| I.S. EN ISO 16828:2014 | ON-DESTRUCTIVE TESTING - ULTRASONIC TESTING - TIME-OF-FLIGHT DIFFRACTION TECHNIQUE AS A METHOD FOR DETECTION AND SIZING OF DISCONTINUITIES (ISO 16828:2012) |
| BS ISO 17577:2006 | Steel. Ultrasonic testing for steel flat products of thickness equal to or greater than 6 mm |
| I.S. EN ISO 16810:2014 | NON-DESTRUCTIVE TESTING - ULTRASONIC TESTING - GENERAL PRINCIPLES (ISO 16810:2012) |
| EN ISO 22825:2017 | Non-destructive testing of welds - Ultrasonic testing - Testing of welds in austenitic steels and nickel-based alloys (ISO 22825:2017) |
| EN 10228-3:2016 | Non-destructive testing of steel forgings - Part 3: Ultrasonic testing of ferritic or martensitic steel forgings |
| BS EN 13480-8:2017 | Metallic industrial piping Additional requirements for aluminium and aluminium alloy piping |
| BS EN 13480-8:2017+A1:2019 | Metallic industrial piping Additional requirements for aluminium and aluminium alloy piping |
| EN 10228-4:2016 | Non-destructive testing of steel forgings - Part 4: Ultrasonic testing of austenitic and austenitic-ferritic stainless steel forgings |
| DIN EN ISO 16827 E : 2014 | NON-DESTRUCTIVE TESTING - ULTRASONIC TESTING - CHARACTERIZATION AND SIZING OF DISCONTINUITIES (ISO 16827:2012) |
| DIN EN ISO 16826 E : 2014 | NON-DESTRUCTIVE TESTING - ULTRASONIC TESTING - EXAMINATION FOR DISCONTINUITIES PERPENDICULAR TO THE SURFACE (ISO 16826:2012) |
| ISO 17640:2017 | Non-destructive testing of welds — Ultrasonic testing — Techniques, testing levels, and assessment |
| I.S. EN 10228-3:2016 | NON-DESTRUCTIVE TESTING OF STEEL FORGINGS - PART 3: ULTRASONIC TESTING OF FERRITIC OR MARTENSITIC STEEL FORGINGS |
| I.S. EN 13480-8:2017&LC:2019 | METALLIC INDUSTRIAL PIPING - PART 8: ADDITIONAL REQUIREMENTS FOR ALUMINIUM AND ALUMINIUM ALLOY PIPING |
| I.S. EN 10228-4:2016 | NON-DESTRUCTIVE TESTING OF STEEL FORGINGS - PART 4: ULTRASONIC TESTING OF AUSTENITIC AND AUSTENITIC-FERRITIC STAINLESS STEEL FORGINGS |
| PREN 12799 : DRAFT 2017 | BRAZING - NON-DESTRUCTIVE EXAMINATION OF BRAZED JOINTS |
| 18/30337971 DC : DRAFT APR 2018 | BS ISO 20890-1 - IN-SERVICE INSPECTIONS FOR PRIMARY COOLANT CIRCUIT COMPONENTS OF LIGHT WATER REACTORS - PART 1: MECHANIZED ULTRASONIC TESTING |
| DIN EN ISO 16810:2014-07 | Non-destructive testing - Ultrasonic testing - General principles (ISO 16810:2012) |
| 16/30345944 DC : 0 | BS EN ISO 22825 - NON-DESTRUCTIVE TESTING OF WELDS - ULTRASONIC TESTING - TESTING OF WELDS IN AUSTENITIC STEELS AND NICKEL-BASED ALLOYS |
| ISO 22825:2017 | Non-destructive testing of welds — Ultrasonic testing — Testing of welds in austenitic steels and nickel-based alloys |
| 17/30350203 DC : 0 | BS ISO 16809 - NON-DESTRUCTIVE TESTING - ULTRASONIC THICKNESS MEASUREMENT |
| DIN EN ISO 16826:2014-06 | Non-destructive testing - Ultrasonic testing - Examination for discontinuities perpendicular to the surface (ISO 16826:2012) |
| I.S. EN ISO 16827:2014 | NON-DESTRUCTIVE TESTING - ULTRASONIC TESTING - CHARACTERIZATION AND SIZING OF DISCONTINUITIES (ISO 16827:2012) |
| 16/30335996 DC : 0 | BS EN ISO 17640 - NON-DESTRUCTIVE TESTING OF WELDS - ULTRASONIC TESTING - TECHNIQUES, TESTING LEVELS, AND ASSESSMENT |
| I.S. EN ISO 17640:2017 | NON-DESTRUCTIVE TESTING OF WELDS - ULTRASONIC TESTING - TECHNIQUES, TESTING LEVELS, AND ASSESSMENT (ISO 17640:2017) |
| I.S. EN ISO 16826:2014 | NON-DESTRUCTIVE TESTING - ULTRASONIC TESTING - EXAMINATION FOR DISCONTINUITIES PERPENDICULAR TO THE SURFACE (ISO 16826:2012) |
| BS EN ISO 16828:2014 | Non-destructive testing. Ultrasonic testing. Time-of-flight diffraction technique as a method for detection and sizing of discontinuities |
| BS EN ISO 22825:2017 | Non-destructive testing of welds. Ultrasonic testing. Testing of welds in austenitic steels and nickel-based alloys |
| ISO 16809:2017 | Non-destructive testing — Ultrasonic thickness measurement |
| I.S. EN ISO 22825:2017 | NON-DESTRUCTIVE TESTING OF WELDS - ULTRASONIC TESTING - TESTING OF WELDS IN AUSTENITIC STEELS AND NICKEL-BASED ALLOYS (ISO 22825:2017) |
| ISO 17577:2016 | Steel — Ultrasonic testing of steel flat products of thickness equal to or greater than 6 mm |
| DIN EN 10228-4:2016-10 | NON-DESTRUCTIVE TESTING OF STEEL FORGINGS - PART 4: ULTRASONIC TESTING OF AUSTENITIC AND AUSTENITIC-FERRITIC STAINLESS STEEL FORGINGS |
| DIN EN 10228-3:2016-10 | NON-DESTRUCTIVE TESTING OF STEEL FORGINGS - PART 3: ULTRASONIC TESTING OF FERRITIC OR MARTENSITIC STEEL FORGINGS |
| ISO 16810:2012 | Non-destructive testing — Ultrasonic testing — General principles |
| ISO 16826:2012 | Non-destructive testing — Ultrasonic testing — Examination for discontinuities perpendicular to the surface |
| ISO 16827:2012 | Non-destructive testing — Ultrasonic testing — Characterization and sizing of discontinuities |
| BS EN 10228-4:2016 | Non-destructive testing of steel forgings Ultrasonic testing of austenitic and austenitic-ferritic stainless steel forgings |
| BS EN 10228-3:2016 | Non-destructive testing of steel forgings Ultrasonic testing of ferritic or martensitic steel forgings |
| ISO 16828:2012 | Non-destructive testing — Ultrasonic testing — Time-of-flight diffraction technique as a method for detection and sizing of discontinuities |
| EN ISO 16810:2014 | Non-destructive testing - Ultrasonic testing - General principles (ISO 16810:2012) |
| EN ISO 16828:2014 | Non-destructive testing - Ultrasonic testing - Time-of-flight diffraction technique as a method for detection and sizing of discontinuities (ISO 16828:2012) |
| EN ISO 16826:2014 | Non-destructive testing - Ultrasonic testing - Examination for discontinuities perpendicular to the surface (ISO 16826:2012) |
| EN ISO 16827:2014 | Non-destructive testing - Ultrasonic testing - Characterization and sizing of discontinuities (ISO 16827:2012) |
| EN 13480-8:2017 | Metallic industrial piping - Part 8: Additional requirements for aluminium and aluminium alloy piping |
| ABS 0014 : 2018 | GUIDE FOR NONDESTRUCTIVE INSPECTION OF HULL WELDS |
| DIN EN ISO 16828:2014-06 | Non-destructive testing - Ultrasonic testing - Time-of-flight diffraction technique as a method for detection and sizing of discontinuities (ISO 16828:2012) |
| 14/30300013 DC : 0 | BS ISO 18211 - NON-DESTRUCTIVE TESTING - LONG RANGE INSPECTION OF ABOVE GROUND PIPELINES AND PLANT PIPING USING GUIDED WAVE TESTING WITH AXIAL PROPAGATION |
| BS EN ISO 16827:2014 | Non-destructive testing. Ultrasonic testing. Characterization and sizing of discontinuities |
| 15/30317351 DC : 0 | BS EN 13480-8:2012/A2 - METALLIC INDUSTRIAL PIPING - PART 8: ADDITIONAL REQUIREMENTS FOR ALUMINIUM AND ALUMINIUM ALLOY PIPING |
| BS EN ISO 16826:2014 | Non-destructive testing. Ultrasonic testing. Examination for discontinuities perpendicular to the surface |
| DIN EN ISO 16828 E : 2014 | NON-DESTRUCTIVE TESTING - ULTRASONIC TESTING - TIME-OF-FLIGHT DIFFRACTION TECHNIQUE AS A METHOD FOR DETECTION AND SIZING OF DISCONTINUITIES (ISO 16828:2012) |
| BS EN ISO 16810:2014 | Non-destructive testing. Ultrasonic testing. General principles |
| 17/30359544 DC : 0 | BS EN 12799 - BRAZING - NON-DESTRUCTIVE EXAMINATION OF BRAZED JOINTS |
| EN ISO 17640:2017 | Non-destructive testing of welds - Ultrasonic testing - Techniques, testing levels, and assessment (ISO 17640:2017) |
| BS EN ISO 17640:2017 | Non-destructive testing of welds. Ultrasonic testing. Techniques, testing levels, and assessment |
| DIN EN 10228-3:1998-07 | NON-DESTRUCTIVE TESTING OF STEEL FORGINGS - PART 3: ULTRASONIC TESTING OF FERRITIC OR MARTENSITIC STEEL FORGINGS |
| DIN EN 10228-4:1999-10 | NON-DESTRUCTIVE TESTING OF STEEL FORGINGS - PART 4: ULTRASONIC TESTING OF AUSTENITIC AND AUSTENITIC-FERRITIC STAINLESS STEEL FORGINGS |
| ONORM EN ISO 16828 : 2014 | NON-DESTRUCTIVE TESTING - ULTRASONIC TESTING - TIME-OF-FLIGHT DIFFRACTION TECHNIQUE AS A METHOD FOR DETECTION AND SIZING OF DISCONTINUITIES (ISO 16828:2012) |
| NBR NM-ISO 16809 : 2016 | NON-DESTRUCTIVE TESTING - ULTRASONIC THICKNESS MEASUREMENT |
| UNE-EN ISO 16810:2014 | Non-destructive testing - Ultrasonic testing - General principles (ISO 16810:2012) |
| UNE-EN 13480-8:2017 | Metallic industrial piping - Part 8: Additional requirements for aluminium and aluminium alloy piping |
| UNE-EN ISO 16827:2014 | Non-destructive testing - Ultrasonic testing - Characterization and sizing of discontinuities (ISO 16827:2012) |
| UNE-EN ISO 16826:2014 | Non-destructive testing - Ultrasonic testing - Examination for discontinuities perpendicular to the surface (ISO 16826:2012) |
| ONORM EN ISO 16827 : 2014 | NON-DESTRUCTIVE TESTING - ULTRASONIC TESTING - CHARACTERIZATION AND SIZING OF DISCONTINUITIES (ISO 16827:2012) |
| ONORM EN ISO 16826 : 2014 | NON-DESTRUCTIVE TESTING - ULTRASONIC TESTING - EXAMINATION FOR DISCONTINUITIES PERPENDICULAR TO THE SURFACE (ISO 16826:2012) |
| ONORM EN ISO 16810 : 2014 | NON-DESTRUCTIVE TESTING - ULTRASONIC TESTING - GENERAL PRINCIPLES (ISO 16810:2012) |
| UNE-EN ISO 16828:2014 | Non-destructive testing - Ultrasonic testing - Time-of-flight diffraction technique as a method for detection and sizing of discontinuities (ISO 16828:2012) |
| UNE-EN 10228-4:2016 | Non-destructive testing of steel forgings - Part 4: Ultrasonic testing of austenitic and austenitic-ferritic stainless steel forgings |
| UNE-EN 10228-3:2016 | Non-destructive testing of steel forgings - Part 3: Ultrasonic testing of ferritic or martensitic steel forgings |
| ISO 16828:2012 | Non-destructive testing — Ultrasonic testing — Time-of-flight diffraction technique as a method for detection and sizing of discontinuities |
| ISO 2400:2012 | Non-destructive testing — Ultrasonic testing — Specification for calibration block No. 1 |
| AS ISO 16809:2020 | Non-destructive testing - Ultrasonic thickness measurement |
| ISO 16826:2012 | Non-destructive testing — Ultrasonic testing — Examination for discontinuities perpendicular to the surface |
| EN 12668-3:2013 | Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 3: Combined equipment |
| ISO 7963:2006 | Non-destructive testing — Ultrasonic testing —- Specification for calibration block No. 2 |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.