|
BS ISO 21172-1:2015
|
Gas cylinders. Welded steel pressure drums up to 3 000 litres capacity for the transport of gases. Design and construction Capacities up to 1 000 litres |
|
UNI EN 14587-3 : 2012
|
RAILWAY APPLICATIONS - TRACK - FLASH BUTT WELDING OF RAILS - PART 3: WELDING IN ASSOCIATION WITH CROSSING CONSTRUCTION |
|
PREN 12493 : DRAFT 2013
|
LPG EQUIPMENT AND ACCESSORIES - WELDED STEEL PRESSURE VESSELS FOR LPG ROAD TANKERS - DESIGN AND MANUFACTURE |
|
I.S. EN 14587-3:2012
|
RAILWAY APPLICATIONS - TRACK - FLASH BUTT WELDING OF RAILS - PART 3: WELDING IN ASSOCIATION WITH CROSSING CONSTRUCTION |
|
DIN EN ISO 17635:2015-08 (Draft)
|
NON-DESTRUCTIVE TESTING OF WELDS - GENERAL RULES FOR METALLIC MATERIALS (ISO 17635:2016) |
|
I.S. EN ISO 19904-1:2006
|
PETROLEUM AND NATURAL GAS INDUSTRIES - FLOATING OFFSHORE STRUCTURES - PART 1: MONOHULLS, SEMI-SUBMERSIBLES AND SPARS |
|
I.S. EN ISO 15614-7:2016
|
SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 7: OVERLAY WELDING |
|
11/30235519 DC : 0
|
BS EN ISO 15614-14 - SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 14: LASER-ARC HYBRID WELDING OF STEELS, NICKEL AND NICKEL ALLOYS |
|
UNE-EN 14587-3:2013
|
Railway applications - Track - Flash butt welding of rails - Part 3: Welding in association with crossing construction |
|
CSA ISO 19904-1 : 2007 : R2012
|
PETROLEUM AND NATURAL GAS INDUSTRIES - FLOATING OFFSHORE STRUCTURES - PART 1: MONOHULLS, SEMI-SUBMERSIBLES AND SPARS |
|
I.S. EN 378-2:2016
|
REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - PART 2: DESIGN, CONSTRUCTION, TESTING, MARKING AND DOCUMENTATION |
|
PREN ISO 15614-13 : DRAFT 2010
|
SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 13: RESISTANCE BUTT (UPSET) AND FLASH WELDING |
|
18/30365854 DC : 0
|
BS EN 1337-6 - STRUCTURAL BEARINGS - PART 6: ROCKER BEARINGS |
|
UNE-EN 15888:2014
|
Transportable gas cylinders - Cylinder bundles - Periodic inspection and testing |
|
15/30320416 DC : 0
|
BS EN 1090-2 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
|
17/30362892 DC : 0
|
BS EN 14025 - TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - METALLIC PRESSURE TANKS - DESIGN AND CONSTRUCTION |
|
I.S. EN 448:2015
|
DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - FITTING ASSEMBLIES OF STEEL SERVICE PIPES, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE |
|
DIN EN 12952-6:2011-10
|
Water-tube boilers and auxiliary installations - Part 6: Inspection during construction; documentation and marking of pressure parts of the boiler |
|
DIN EN 12732:2014-07
|
Gas infrastructure - Welding steel pipework - Functional requirements (includes Amendment A1:2014) |
|
DIN EN ISO 3834-5:2015-11
|
Quality requirements for fusion welding of metallic materials - Part 5: Documents with which it is necessary to conform to claim conformity to the quality requirements of ISO 3834-2, ISO 3834-3 or ISO 3834-4 (ISO 3834-5:2015) |
|
UNE-EN 378-2:2017
|
Refrigerating systems and heat pumps - Safety and environmental requirements - Part 2: Design, construction, testing, marking and documentation |
|
BS EN 14141:2013
|
Valves for natural gas transportation in pipelines. Performance requirements and tests |
|
UNE-EN 14334:2015
|
LPG equipment and accessories - Inspection and testing of LPG road tankers |
|
DIN EN 14893:2014-09
|
LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LIQUEFIED PETROLEUM GAS (LPG) WELDED STEEL PRESSURE DRUMS WITH A CAPACITY BETWEEN 150 LITRES AND 1000 LITRES |
|
14/30278953 DC : 0
|
BS ISO 17842-1 - SAFETY OF AMUSEMENT RIDES AND AMUSEMENT DEVICES - PART 1: DESIGN AND MANUFACTURE |
|
ISO 23278:2015
|
Non-destructive testing of welds Magnetic particle testing Acceptance levels |
|
ONORM EN ISO 3834-5 : 2015
|
QUALITY REQUIREMENTS FOR FUSION WELDING OF METALLIC MATERIALS - PART 5: DOCUMENTS WITH WHICH IT IS NECESSARY TO CONFORM TO CLAIM CONFORMITY TO THE QUALITY REQUIREMENTS OF ISO 3834-2, ISO 3834-3 OR ISO 3834-4 (ISO 3834-5:2015) |
|
DIN EN 15888:2014-07
|
Transportable gas cylinders - Cylinder bundles - Periodic inspection and testing |
|
EN ISO 15614-13:2012
|
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 13: Upset (resistance butt) and flash welding (ISO 15614-13:2012) |
|
EN 12952-5:2011
|
Water-tube boilers and auxiliary installations - Part 5: Workmanship and construction of pressure parts of the boiler |
|
EN ISO 23278 : 2015
|
NON-DESTRUCTIVE TESTING OF WELDS - MAGNETIC PARTICLE TESTING - ACCEPTANCE LEVELS (ISO 23278:2015) |
|
DIN EN ISO 17635:2017-04
|
NON-DESTRUCTIVE TESTING OF WELDS - GENERAL RULES FOR METALLIC MATERIALS (ISO 17635:2016) |
|
EN ISO 17635:2016
|
Non-destructive testing of welds - General rules for metallic materials (ISO 17635:2016) |
|
UNI EN 12732 : 2014
|
GAS INFRASTRUCTURE - WELDING STEEL PIPEWORK - FUNCTIONAL REQUIREMENTS |
|
ONORM EN 14334 : 2015
|
LPG EQUIPMENT AND ACCESSORIES - INSPECTION AND TESTING OF LPG ROAD TANKERS |
|
DIN 25435-2:2014-01
|
In-service inspections for primary coolant circuit components of light water reactors - Part 2: Magnetic particle and penetrant testing |
|
BS ISO 19904-1 : 2006 AMD 16927
|
PETROLEUM AND NATURAL GAS INDUSTRIES - FLOATING OFFSHORE STRUCTURES - PART 1: MONOHULLS, SEMI-SUBMERSIBLES AND SPARS |
|
I.S. EN ISO 15614-1:2017
|
SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 1: ARC AND GAS WELDING OF STEELS AND ARC WELDING OF NICKEL AND NICKEL ALLOYS (ISO 15614-1:2017, CORRECTED VERSION 2017-10-01) |
|
PREN 14587-1 : DRAFT 2017
|
RAILWAY APPLICATIONS - INFRASTRUCTURE - FLASH BUTT WELDING OF NEW RAILS - PART 1: R220, R260, R260MN, R320CR, R350HT, R350LHT, R370CRHT AND R400HT GRADE RAILS IN A FIXED PLANT |
|
18/30338004 DC : DRAFT APR 2018
|
BS ISO 20890-2 - IN-SERVICE INSPECTIONS FOR PRIMARY COOLANT CIRCUIT COMPONENTS OF LIGHT WATER REACTORS - PART 2: MAGNETIC PARTICLE AND PENETRANT TESTING |
|
15/30303377 DC : 0
|
BS EN ISO 17635 - NON-DESTRUCTIVE TESTING OF WELDS - GENERAL RULES FOR METALLIC MATERIALS - COMPLEMENTARY ELEMENT |
|
13/30248693 DC : 0
|
BS EN 14893 - LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LIQUEFIED PETROLEUM GAS (LPG) WELDED STEEL PRESSURE DRUMS WITH A CAPACITY BETWEEN 150 LITRES AND 1000 LITRES |
|
BS EN 14587-3:2012
|
Railway applications. Track. Flash butt welding of rails Welding in association with crossing construction |
|
DIN EN ISO 15614-14:2013-12
|
SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 14: LASER-ARC HYBRID WELDING OF STEELS, NICKEL AND NICKEL ALLOYS (ISO 15614-14:2013) |
|
BS EN ISO 17635:2016
|
Non-destructive testing of welds. General rules for metallic materials |
|
API 2FPS : 2011
|
PLANNING, DESIGNING, AND CONSTRUCTING FLOATING PRODUCTION SYSTEMS |
|
BS EN 15888:2014
|
Transportable gas cylinders. Cylinder bundles. Periodic inspection and testing |
|
16/30336476 DC : 0
|
BS EN 287-6 - QUALIFICATION TEST OF WELDERS - FUSION WELDING - PART 6: CAST IRON |
|
DIN EN 15888 E : 2014
|
TRANSPORTABLE GAS CYLINDERS - CYLINDER BUNDLES - PERIODIC INSPECTION AND TESTING |
|
16/30329281 DC : 0
|
BS ISO 20475 - GAS CYLINDERS - CYLINDER BUNDLES - PERIODIC INSPECTION AND TESTING |
|
14/30292703 DC : 0
|
BS EN ISO 3834-5 - QUALITY REQUIREMENTS FOR FUSION WELDING OF METALLIC MATERIALS - PART 5: DOCUMENTS WITH WHICH IT IS NECESSARY TO CONFORM TO CLAIM CONFORMITY TO THE QUALITY REQUIREMENTS OF ISO 3834-2, ISO 3834-3 OR ISO 3834-4 |
|
11/30253901 DC : 0
|
BS EN 13445-5 - UNFIRED PRESSURE VESSELS - PART 5: INSPECTION AND TESTING |
|
PREN 1090-2 : DRAFT 2015
|
EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
|
13/30266359 DC : 0
|
BS EN ISO 15614-1 - SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 1: ARC AND GAS WELDING OF STEELS AND ARC WELDING OF NICKEL AND NICKEL ALLOYS |
|
CSA ISO 19904-1 : 2007 : R2017
|
PETROLEUM AND NATURAL GAS INDUSTRIES - FLOATING OFFSHORE STRUCTURES - PART 1: MONOHULLS, SEMI-SUBMERSIBLES AND SPARS |
|
DIN EN 14893 E : 2014
|
LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LIQUEFIED PETROLEUM GAS (LPG) WELDED STEEL PRESSURE DRUMS WITH A CAPACITY BETWEEN 150 LITRES AND 1000 LITRES |
|
I.S. EN 16125:2015
|
LPG EQUIPMENT AND ACCESSORIES - PIPEWORK SYSTEMS AND SUPPORTS - LPG IN LIQUID PHASE AND VAPOUR PRESSURE PHASE |
|
I.S. EN 15888:2014
|
TRANSPORTABLE GAS CYLINDERS - CYLINDER BUNDLES - PERIODIC INSPECTION AND TESTING |
|
BS EN ISO 15614-7:2016
|
Specification and qualification of welding procedures for metallic materials. Welding procedure test Overlay welding |
|
ISO 21172-1:2015
|
Gas cylinders Welded steel pressure drums up to 3 000 litres capacity for the transport of gases Design and construction Part 1: Capacities up to 1 000 litres |
|
ISO 19904-1:2006
|
Petroleum and natural gas industries Floating offshore structures Part 1: Monohulls, semi-submersibles and spars |
|
PREN 448 : DRAFT 2018
|
DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - FITTING ASSEMBLIES OF STEEL SERVICE PIPES, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE |
|
PREN 1337-6 : DRAFT 2018
|
STRUCTURAL BEARINGS - PART 6: ROCKER BEARINGS |
|
UNI EN ISO 15614-14 : 2013
|
SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 14: LASER-ARC HYBRID WELDING OF STEELS, NICKEL AND NICKEL ALLOYS |
|
BS EN ISO 15614-1:2017
|
Specification and qualification of welding procedures for metallic materials. Welding procedure test Arc and gas welding of steels and arc welding of nickel and nickel alloys |
|
DIN EN ISO 15614-13:2012-10
|
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 13: Upset (resistance butt) and flash welding (ISO 15614-13:2012) |
|
DIN EN 14334:2015-01
|
LPG equipment and accessories - Inspection and testing of LPG road tankers |
|
UNE-EN 12542:2011
|
LPG equipment and accessories - Static welded steel cylindrical tanks, serially produced for the storage of Liquefied Petroleum Gas (LPG) having a volume not greater than 13 m³ - Design and manufacture |
|
UNE-EN ISO 3834-5:2015
|
Quality requirements for fusion welding of metallic materials - Part 5: Documents with which it is necessary to conform to claim conformity to the quality requirements of ISO 3834-2, ISO 3834-3 or ISO 3834-4 (ISO 3834-5:2015) |
|
UNE-EN 14141:2014
|
Valves for natural gas transportation in pipelines - Performance requirements and tests |
|
I.S. EN 12542:2010
|
LPG EQUIPMENT AND ACCESSORIES - STATIC WELDED STEEL CYLINDRICAL TANKS, SERIALLY PRODUCED FOR THE STORAGE OF LIQUEFIED PETROLEUM GAS (LPG) HAVING A VOLUME NOT GREATER THAN 13 M[3] - DESIGN AND MANUFACTURE |
|
ONORM EN 12493 : 2015
|
LPG EQUIPMENT AND ACCESSORIES - WELDED STEEL PRESSURE VESSELS FOR LPG ROAD TANKERS - DESIGN AND MANUFACTURE |
|
ONORM EN 12542 : 2010
|
LPG EQUIPMENT AND ACCESSORIES - STATIC WELDED STEEL CYLINDRICAL TANKS, SERIALLY PRODUCED FOR THE STORAGE OF LIQUEFIED PETROLEUM GAS (LPG) HAVING A VOLUME NOT GREATER THAN 13 M[3] - DESIGN AND MANUFACTURE |
|
DIN EN 12542:2010-12
|
LPG EQUIPMENT AND ACCESSORIES - STATIC WELDED STEEL CYLINDRICAL TANKS, SERIALLY PRODUCED FOR THE STORAGE OF LIQUEFIED PETROLEUM GAS (LPG) HAVING A VOLUME NOT GREATER THAN 13 M[3] - DESIGN AND MANUFACTURE |
|
I.S. EN 12952-6:2011
|
WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 6: INSPECTION DURING CONSTRUCTION; DOCUMENTATION AND MARKING OF PRESSURE PARTS OF THE BOILER |
|
I.S. EN 12732:2013
|
GAS INFRASTRUCTURE - WELDING STEEL PIPEWORK - FUNCTIONAL REQUIREMENTS |
|
I.S. EN 14141:2013
|
VALVES FOR NATURAL GAS TRANSPORTATION IN PIPELINES - PERFORMANCE REQUIREMENTS AND TESTS |
|
I.S. EN ISO 3834-5:2015
|
QUALITY REQUIREMENTS FOR FUSION WELDING OF METALLIC MATERIALS - PART 5: DOCUMENTS WITH WHICH IT IS NECESSARY TO CONFORM TO CLAIM CONFORMITY TO THE QUALITY REQUIREMENTS OF ISO 3834-2, ISO 3834-3 OR ISO 3834-4 |
|
I.S. EN 14893:2014
|
LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LIQUEFIED PETROLEUM GAS (LPG) WELDED STEEL PRESSURE DRUMS WITH A CAPACITY BETWEEN 150 LITRES AND 1000 LITRES |
|
I.S. EN 12952-5:2011
|
WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 5: WORKMANSHIP AND CONSTRUCTION OF PRESSURE PARTS OF THE BOILER |
|
EN 15888:2014
|
Transportable gas cylinders - Cylinder bundles - Periodic inspection and testing |
|
I.S. EN ISO 15614-13:2012
|
SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 13: UPSET (RESISTANCE BUTT) AND FLASH WELDING (ISO 15614-13:2012) |
|
DIN EN 14420-4:2013-09
|
Hose fittings with clamp units - Part 4: Flange connections |
|
I.S. EN 14420-4:2013
|
HOSE FITTINGS WITH CLAMP UNITS - PART 4: FLANGE CONNECTIONS |
|
I.S. EN 14334:2014
|
LPG EQUIPMENT AND ACCESSORIES - INSPECTION AND TESTING OF LPG ROAD TANKERS |
|
DIN EN ISO 23278:2015-06
|
NON-DESTRUCTIVE TESTING OF WELDS - MAGNETIC PARTICLE TESTING - ACCEPTANCE LEVELS (ISO 23278:2015) |
|
DIN EN 12732:2000-09
|
GAS INFRASTRUCTURE - WELDING STEEL PIPEWORK - FUNCTIONAL REQUIREMENTS |
|
DIN EN 12493:2017-01
|
LPG EQUIPMENT AND ACCESSORIES - WELDED STEEL PRESSURE VESSELS FOR LPG ROAD TANKERS - DESIGN AND MANUFACTURE |
|
UNI EN 12493 : 2014
|
LPG EQUIPMENT AND ACCESSORIES - WELDED STEEL PRESSURE VESSELS FOR LPG ROAD TANKERS - DESIGN AND MANUFACTURE |
|
ONORM EN 14420-4 : 2013
|
HOSE FITTINGS WITH CLAMP UNITS - PART 4: FLANGE CONNECTIONS |
|
BS EN 12493 : 2013
|
LPG EQUIPMENT AND ACCESSORIES - WELDED STEEL PRESSURE VESSELS FOR LPG ROAD TANKERS - DESIGN AND MANUFACTURE |
|
UNE-EN ISO 15614-7:2017
|
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 7: Overlay welding (ISO 15614-7:2016) |
|
13/30266592 DC : 0
|
BS EN 12493 - LPG EQUIPMENT AND ACCESSORIES - WELDED STEEL PRESSURE VESSELS FOR LPG ROAD TANKERS - DESIGN AND MANUFACTURE |
|
DIN EN 14587-3:2013-01
|
Railway applications - Track - Flash butt welding of rails - Part 3: Welding in association with crossing construction |
|
00/708223 DC : DRAFT MAY 2000
|
BS EN ISO 15614-9 - SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 9: UNDERWATER HYPERBARIC WET WELDING |
|
13/30291774 DC : 0
|
BS EN 378-2 - REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - PART 2: DESIGN, CONSTRUCTION, TESTING, MARKING AND DOCUMENTATION |
|
10/30217417 DC : 0
|
BS EN ISO 15614-13 - SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 13: RESISTANCE BUTT (UPSET) AND FLASH WELDING |
|
16/30342040 DC : 0
|
BS EN 13941-2 - DISTRICT HEATING PIPES - DESIGN AND INSTALLATION OF THERMAL INSULATED BONDED SINGLE AND TWIN PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - PART 2: INSTALLATION |
|
ISO 20475:2018
|
Gas cylinders — Cylinder bundles — Periodic inspection and testing |
|
ISO 10855-1:2018
|
Offshore containers and associated lifting sets Part 1: Design, manufacture and marking of offshore containers |
|
PREN 287-6 : DRAFT 2016
|
QUALIFICATION TEST OF WELDERS - FUSION WELDING - PART 6: CAST IRON |
|
EN 378-2:2016
|
Refrigerating systems and heat pumps - Safety and environmental requirements - Part 2: Design, construction, testing, marking and documentation |
|
DIN EN 1092-1:2016-05 (Draft)
|
FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES |
|
PREN 12542 : DRAFT 2016
|
LPG EQUIPMENT AND ACCESSORIES - STATIC WELDED STEEL CYLINDRICAL TANKS, SERIALLY PRODUCED FOR THE STORAGE OF LIQUEFIED PETROLEUM GAS (LPG) HAVING A VOLUME NOT GREATER THAN 13 M[3] - DESIGN AND MANUFACTURE |
|
UNE-EN 12952-5:2012
|
Water-tube boilers and auxiliary installations - Part 5: Workmanship and construction of pressure parts of the boiler |
|
BS EN 14025 : 2013
|
TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - METALLIC PRESSURE TANKS - DESIGN AND CONSTRUCTION |
|
EN 14025:2013+A1:2016
|
TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - METALLIC PRESSURE TANKS - DESIGN AND CONSTRUCTION |
|
ISO 17842-1:2015
|
Safety of amusement rides and amusement devices — Part 1: Design and manufacture |
|
I.S. EN 1092-1:2007
|
FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES,FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES |
|
DIN EN 448:2016-02
|
DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - FITTING ASSEMBLIES OF STEEL SERVICE PIPES, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE |
|
DIN EN 14141:2013-08
|
VALVES FOR NATURAL GAS TRANSPORTATION IN PIPELINES - PERFORMANCE REQUIREMENTS AND TESTS |
|
UNI EN 12542 : 2010
|
LPG EQUIPMENT AND ACCESSORIES - STATIC WELDED STEEL CYLINDRICAL TANKS, SERIALLY PRODUCED FOR THE STORAGE OF LIQUEFIED PETROLEUM GAS (LPG) HAVING A VOLUME NOT GREATER THAN 13 MUE - DESIGN AND MANUFACTURE |
|
EN 12542:2010
|
LPG equipment and accessories - Static welded steel cylindrical tanks, serially produced for the storage of Liquefied Petroleum Gas (LPG) having a volume not greater than 13 m³ - Design and manufacture |
|
UNE-EN 16125:2016
|
LPG Equipment and Accessories - Pipework systems and supports - LPG in liquid phase and vapour pressure phase |
|
UNI EN 14334 : 2014
|
LPG EQUIPMENT AND ACCESSORIES - INSPECTION AND TESTING OF LPG ROAD TANKERS |
|
UNI EN 12952-5 : 2011
|
WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 5: WORKMANSHIP AND CONSTRUCTION OF PRESSURE PARTS OF THE BOILER |
|
UNI EN 14893 : 2014
|
LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LIQUEFIED PETROLEUM GAS (LPG) WELDED STEEL PRESSURE DRUMS WITH A CAPACITY BETWEEN 150 LITRES AND 1000 LITRES |
|
UNI EN 14141 : 2013
|
VALVES FOR NATURAL GAS TRANSPORTATION IN PIPELINES - PERFORMANCE REQUIREMENTS AND TESTS |
|
UNI EN 12952-6 : 2011
|
WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 6: INSPECTION DURING CONSTRUCTION; DOCUMENTATION AND MARKING OF PRESSURE PARTS OF THE BOILER |
|
ONORM EN ISO 15614-13 : 2012
|
SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 13: UPSET (RESISTANCE BUTT) AND FLASH WELDING (ISO 15614-13:2012) |
|
UNI EN 14420-4 : 2013
|
HOSE FITTINGS WITH CLAMP UNITS - PART 4: FLANGE CONNECTIONS |
|
PREN 12953-5 : DRAFT 2018
|
SHELL BOILERS - PART 5: INSPECTION DURING CONSTRUCTION, DOCUMENTATION AND MARKING OF PRESSURE PARTS OF THE BOILER |
|
BS EN ISO 23278:2015
|
Non-destructive testing of welds. Magnetic particle testing. Acceptance levels |
|
16/30336440 DC : DRAFT MAR 2016
|
BS EN 1092-1 - FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES |
|
PREN 12972 : DRAFT 2017
|
TANKS FOR TRANSPORT OF DANGEROUS GOODS - TESTING, INSPECTION AND MARKING OF METALLIC TANKS |
|
BS EN ISO 15614-14:2013
|
Specification and qualification of welding procedures for metallic materials. Welding procedure test Laser-arc hybrid welding of steels, nickel and nickel alloys |
|
13/30276940 DC : 0
|
BS EN 16125 - LPG EQUIPMENT AND ACCESSORIES - PIPEWORK SYSTEMS AND SUPPORTS - LPG LIQUID PHASE AND VAPOUR PRESSURE PHASE |
|
I.S. EN 287-6:2010
|
QUALIFICATION TEST OF WELDERS - FUSION WELDING - PART 6: CAST IRON |
|
15/30331856 DC : 0
|
BS EN ISO 10855-1 - OFFSHORE CONTAINERS AND ASSOCIATED LIFTING SETS - PART 1: OFFSHORE CONTAINER - DESIGN, MANUFACTURE AND MARKING |
|
13/30266419 DC : 0
|
BS EN ISO 23278 - NON-DESTRUCTIVE TESTING OF WELDS - MAGNETIC PARTICLE TESTING OF WELDS - ACCEPTANCE LEVELS |
|
CSA ISO 19904-1 : 2007
|
PETROLEUM AND NATURAL GAS INDUSTRIES - FLOATING OFFSHORE STRUCTURES - PART 1: MONOHULLS, SEMI-SUBMERSIBLES AND SPARS |
|
I.S. EN ISO 17635:2016
|
NON-DESTRUCTIVE TESTING OF WELDS - GENERAL RULES FOR METALLIC MATERIALS (ISO 17635:2016) |
|
DIN EN 16125:2016-03
|
LPG EQUIPMENT AND ACCESSORIES - PIPEWORK SYSTEMS AND SUPPORTS - LPG LIQUID PHASE AND VAPOUR PRESSURE PHASE |
|
PREN 378-2 : DRAFT 2013
|
REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - PART 2: DESIGN, CONSTRUCTION, TESTING, MARKING AND DOCUMENTATION |
|
DIN EN ISO 15614-7:2015-01 (Draft)
|
SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 7: OVERLAY WELDING (ISO 15614-7:2016) |
|
ISO 13847:2013
|
Petroleum and natural gas industries — Pipeline transportation systems — Welding of pipelines |
|
BS EN 16125:2015
|
LPG Equipment and Accessories. Pipework systems and supports. LPG in liquid phase and vapour pressure phase |
|
UNI EN 1092-1 : 2013
|
FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES |
|
UNE-EN ISO 15614-1:2018
|
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys (ISO 15614-1:2017, Corrected version 2017-10-01) |
|
17/30360691 DC : 0
|
BS EN 12972 - TANKS FOR TRANSPORT OF DANGEROUS GOODS - TESTING, INSPECTION AND MARKING OF METALLIC TANKS |
|
18/30369695 DC : 0
|
BS EN 12953-5 - SHELL BOILERS - PART 5: INSPECTION DURING CONSTRUCTION, DOCUMENTATION AND MARKING OF PRESSURE PARTS OF THE BOILER |
|
16/30326248 DC : 0
|
BS EN 12542 - LPG EQUIPMENT AND ACCESSORIES - STATIC WELDED STEEL CYLINDRICAL TANKS, SERIALLY PRODUCED FOR THE STORAGE OF LIQUEFIED PETROLEUM GAS (LPG) HAVING A VOLUME NOT GREATER THAN 13 M[3] - DESIGN AND MANUFACTURE |
|
DIN EN 12493:2014-03
|
LPG EQUIPMENT AND ACCESSORIES - WELDED STEEL PRESSURE VESSELS FOR LPG ROAD TANKERS - DESIGN AND MANUFACTURE |
|
17/30358164 DC : 0
|
BS EN 14587-1 - RAILWAY APPLICATIONS - INFRASTRUCTURE - FLASH BUTT WELDING OF NEW RAILS - PART 1: R220, R260, R260MN, R320CR, R350HT, R350LHT, R370CRHT AND R400HT GRADE RAILS IN A FIXED PLANT |
|
PREN 14893 : DRAFT 2013
|
LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LIQUEFIED PETROLEUM GAS (LPG) WELDED STEEL PRESSURE DRUMS WITH A CAPACITY BETWEEN 150 LITRES AND 1000 LITRES |
|
ISO 15614-1:2017
|
Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys |
|
EN 287-6:2018
|
Qualification test of welders - Fusion welding - Part 6: Cast irons |
|
ISO 15614-7:2016
|
Specification and qualification of welding procedures for metallic materials Welding procedure test Part 7: Overlay welding |
|
EN 12480:2018
|
Gas meters - Rotary displacement gas meters |
|
I.S. EN 12480:2018
|
GAS METERS - ROTARY DISPLACEMENT GAS METERS |
|
I.S. EN ISO 23278:2015
|
NON-DESTRUCTIVE TESTING OF WELDS - MAGNETIC PARTICLE TESTING - ACCEPTANCE LEVELS (ISO 23278:2015) |
|
BS EN 12542:2010
|
LPG equipment and accessories. Static welded steel cylindrical tanks, serially produced for the storage of liquefied petroleum gas (LPG) having a volume not greater than 13 m3. Design and manufacture |
|
BS ISO 17842-1:2015
|
Safety of amusement rides and amusement devices Design and manufacture |
|
ISO 15614-13:2012
|
Specification and qualification of welding procedures for metallic materials Welding procedure test Part 13: Upset (resistance butt) and flash welding |
|
BS EN 12952-5:2011
|
Water-tube boilers and auxiliary installations Workmanship and construction of pressure parts of the boiler |
|
ISO 17635:2016
|
Non-destructive testing of welds — General rules for metallic materials |
|
UNE-EN ISO 15614-13:2013
|
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 13: Upset (resistance butt) and flash welding (ISO 15614-13:2012) |
|
ISO 3834-5:2015
|
Quality requirements for fusion welding of metallic materials Part 5: Documents with which it is necessary to conform to claim conformity to the quality requirements of ISO 3834-2, ISO 3834-3 or ISO 3834-4 |
|
BS EN 12952-6:2011
|
Water-tube boilers and auxiliary installations Inspection during construction; documentation and marking of pressure parts of the boiler |
|
BS EN 378-2:2016
|
Refrigerating systems and heat pumps. Safety and environmental requirements Design, construction, testing, marking and documentation |
|
BS EN ISO 19904-1:2006
|
Petroleum and natural gas industries. Floating offshore structures Monohulls, semi-submersibles and spars |
|
UNE-EN 14025:2014
|
Tanks for the transport of dangerous goods - Metallic pressure tanks - Design and construction |
|
BS EN 12732 : 2013
|
GAS INFRASTRUCTURE - WELDING STEEL PIPEWORK - FUNCTIONAL REQUIREMENTS |
|
BS EN 14420-4:2013
|
Hose fittings with clamp units Flange connections |
|
UNE-EN 448:2017
|
District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Fitting assemblies of steel service pipes, polyurethane thermal insulation and outer casing of polyethylene |
|
UNE-EN 12732:2014+A1:2014
|
Gas infrastructure - Welding steel pipework - Functional requirements |
|
EN 14893:2014
|
LPG equipment and accessories - Transportable Liquefied Petroleum Gas (LPG) welded steel pressure drums with a capacity between 150 litres and 1 000 litres |
|
ONORM EN 12732 : JUL 2014
|
GAS INFRASTRUCTURE - WELDING STEEL PIPEWORK - FUNCTIONAL REQUIREMENTS |
|
EN 16125:2015
|
LPG Equipment and Accessories - Pipework systems and supports - LPG in liquid phase and vapour pressure phase |
|
EN 14420-4:2013
|
Hose fittings with clamp units - Part 4: Flange connections |
|
EN 14141:2013
|
Valves for natural gas transportation in pipelines - Performance requirements and tests |
|
EN ISO 15614-14:2013
|
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 14: Laser-arc hybrid welding of steels, nickel and nickel alloys (ISO 15614-14:2013) |
|
EN 14587-3:2012
|
Railway applications - Track - Flash butt welding of rails - Part 3: Welding in association with crossing construction |
|
EN 14334:2014
|
LPG equipment and accessories - Inspection and testing of LPG road tankers |
|
EN 448:2015
|
District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Fitting assemblies of steel service pipes, polyurethane thermal insulation and outer casing of polyethylene |
|
EN ISO 19904-1:2006
|
Petroleum and natural gas industries - Floating offshore structures - Part 1: Monohulls, semi-submersibles and spars (ISO 19904-1:2006) |
|
UNE-EN 14893:2014
|
LPG equipment and accessories - Transportable Liquefied Petroleum Gas (LPG) welded steel pressure drums with a capacity between 150 litres and 1 000 litres |
|
13/30264471 DC : 0
|
BS ISO 21172-1 - GAS CYLINDERS - WELDED STEEL PRESSURE DRUMS UP TO 3000 LITRES CAPACITY FOR THE TRANSPORT OF GASES - DESIGN AND CONSTRUCTION - PART 1: CAPACITIES UP TO 1000 LITRES |
|
UNE-EN ISO 17635:2017
|
Non-destructive testing of welds - General rules for metallic materials (ISO 17635:2016) |
|
17/30291980 DC : 0
|
BS EN ISO 19904-1 - PETROLEUM AND NATURAL GAS INDUSTRIES - FLOATING OFFSHORE STRUCTURES - PART 1: SHIP-SHAPED, SEMI-SUBMERSIBLE, SPAR AND SHALLOW-DRAUGHT CYLINDRICAL STRUCTURES |
|
14/30300118 DC : 0
|
BS EN 14334 - LPG EQUIPMENT AND ACCESSORIES - INSPECTION AND TESTING OF LPG ROAD TANKERS |
|
00/708224 DC : DRAFT MAY 2000
|
BS EN ISO 15614-10 - SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 10: HYPERBARIC DRY WELDING |
|
ISO 10855-3:2018
|
Offshore containers and associated lifting sets Part 3: Periodic inspection, examination and testing |
|
17/30353039 DC : 0
|
BS EN ISO 15620 - WELDING - FRICTION WELDING OF METALLIC MATERIALS |
|
API 2CCU : 2017
|
OFFSHORE CARGO CARRYING UNITS |
|
PREN 13445-5 : DRAFT 2011
|
UNFIRED PRESSURE VESSELS - PART 5: INSPECTION AND TESTING |
|
18/30368651 DC : 0
|
BS EN 448 - DISTRICT HEATING PIPES - BONDED SINGLE PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - FACTORY MADE FITTING ASSEMBLIES OF STEEL SERVICE PIPES, POLYURETHANE THERMAL INSULATION AND A CASING OF POLYETHYLENE |
|
I.S. EN 14025:2013
|
TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - METALLIC PRESSURE TANKS - DESIGN AND CONSTRUCTION |
|
16/30258490 DC : 0
|
BS EN 14587-1 - RAILWAY APPLICATIONS - INFRASTRUCTURE - FLASH BUTT WELDING OF RAILS - PART 1: NEW R220, R260, R260MN, R320CR, R350HT, R370LHT AND R400HT GRADE RAILS IN A FIXED PLANT |
|
UNE-EN 12493:2014
|
LPG equipment and accessories - Welded steel pressure vessels for LPG road tankers - Design and manufacture |
|
UNE-EN ISO 15614-14:2014
|
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 14: Laser-arc hybrid welding of steels, nickel and nickel alloys (ISO 15614-14:2013) |
|
UNE-EN ISO 23278:2015
|
Non-destructive testing of welds - Magnetic particle testing - Acceptance levels (ISO 23278:2015) |
|
EN 1092-1:2018
|
Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 1: Steel flanges |
|
I.S. EN 12493:2013
|
LPG EQUIPMENT AND ACCESSORIES - WELDED STEEL PRESSURE VESSELS FOR LPG ROAD TANKERS - DESIGN AND MANUFACTURE |
|
I.S. EN ISO 15614-14:2013
|
SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 14: LASER-ARC HYBRID WELDING OF STEELS, NICKEL AND NICKEL ALLOYS (ISO 15614-14:2013) |
|
UNI EN 15888 : 2014
|
TRANSPORTABLE GAS CYLINDERS - CYLINDER BUNDLES - PERIODIC INSPECTION AND TESTING |
|
EN 12493:2013+A1:2014/AC:2015
|
LPG EQUIPMENT AND ACCESSORIES - WELDED STEEL PRESSURE VESSELS FOR LPG ROAD TANKERS - DESIGN AND MANUFACTURE |
|
BS EN 448:2015
|
District heating pipes. Preinsulated bonded pipe systems for directly buried hot water networks. Fitting assemblies of steel service pipes, polyurethane thermal insulation and outer casing of polyethylene |
|
DIN EN 12952-5:2012-01
|
Water-tube boilers and auxiliary installations - Part 5: Workmanship and construction of pressure parts of the boiler |
|
BS EN 14893:2014
|
LPG equipment and accessories. Transportable Liquefied Petroleum Gas (LPG) welded steel pressure drums with a capacity between 150 litres and 1 000 litres |
|
BS EN 14334:2014
|
LPG equipment and accessories. Inspection and testing of LPG road tankers |
|
BS EN ISO 15614-13:2012
|
Specification and qualification of welding procedures for metallic materials. Welding procedure test Upset (resistance butt) and flash welding |
|
BS EN ISO 3834-5:2015
|
Quality requirements for fusion welding of metallic materials Documents with which it is necessary to conform to claim conformity to the quality requirements of ISO 3834-2, ISO 3834-3 or ISO 3834-4 |
|
EN ISO 3834-5:2015
|
Quality requirements for fusion welding of metallic materials - Part 5: Documents with which it is necessary to conform to claim conformity to the quality requirements of ISO 3834-2, ISO 3834-3 or ISO 3834-4 (ISO 3834-5:2015) |
|
EN 12952-6:2011
|
Water-tube boilers and auxiliary installations - Part 6: Inspection during construction; documentation and marking of pressure parts of the boiler |
|
ONORM EN 12952-6 : 2011
|
WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 6: INSPECTION DURING CONSTRUCTION, DOCUMENTATION AND MARKING OF PRESSURE PARTS OF THE BOILER |
|
EN 12732:2013+A1:2014
|
Gas infrastructure - Welding steel pipework - Functional requirements |
|
UNI EN ISO 15614-13 : 2012
|
SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 13: UPSET (RESISTANCE BUTT) AND FLASH WELDING |
|
UNE-EN 12732:2014
|
Gas infrastructure - Welding steel pipework - Functional requirements |
|
UNE-EN 16125:2020
|
LPG Equipment and Accessories - Pipework systems and supports - LPG in liquid phase and vapour pressure phase |