ISO 17852:2006
Current
Current
The latest, up-to-date edition.
Water quality Determination of mercury Method using atomic fluorescence spectrometry
Available format(s)
PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users , Hardcopy
Language(s)
English, French
Published date
22-05-2006
Important note : Users cannot be edited or removed once added to your Multi user PDF.
ISO 17852:2006 specifies a method for the determination of mercury in drinking, surface, ground and rain water using atomic fluorescence spectrometry. It may be applied to industrial and municipal waste water after an additional digestion step under appropriate conditions. The potential linear dynamic range is approximately 1 nanogram per litre to 100 micrograms per litre. In practice, the working range is often from 10 nanograms per litre to 10 micrograms per litre.
Samples containing mercury at concentrations higher than the working range can be analysed following appropriate dilution of the sample. The method detection limit will be dependent on the selected operating conditions and calibration range. With high purity reagents, a method detection limit of less than 1 nanogram per litre is obtainable.The relative standard deviation is typically less than 5 % for concentrations greater than twenty times the method detection limit. The sensitivity of this method is dependent on the selected operating conditions.
| DevelopmentNote |
Supersedes ISO/DIS 17852 (05/2006)
|
| DocumentType |
Standard
|
| Pages |
13
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Standards | Relationship |
| NBN EN ISO 17852 : 2008 | Identical |
| NEN EN ISO 17852 : 2008 | Identical |
| NS EN ISO 17852 : 1ED 2008 | Identical |
| I.S. EN ISO 17852:2008 | Identical |
| PN EN ISO 17852 : 2009 | Identical |
| UNE-EN ISO 17852:2008 | Identical |
| SN EN ISO 17852 : 2008 | Identical |
| UNI EN ISO 17852 : 2008 | Identical |
| SS-EN ISO 17852:2008 | Identical |
| BS EN ISO 17852:2008 | Identical |
| BS ISO 17852 : 2006 | Identical |
| BS 6068-2.98(2006) : 2006 | Identical |
| EN ISO 17852:2008 | Identical |
| DIN EN ISO 17852:2008-04 | Identical |
| NF EN ISO 17852 : 2008 | Identical |
| DIN EN 16711-2:2016-02 | TEXTILES - DETERMINATION OF METAL CONTENT - PART 2: DETERMINATION OF METALS EXTRACTED BY ACIDIC ARTIFICIAL PERSPIRATION SOLUTION |
| I.S. EN 1483:2007 | WATER QUALITY - DETERMINATION OF MERCURY - METHOD USING ATOMIC ABSORPTION SPECTROMETRY |
| I.S. EN 15853:2010 | AMBIENT AIR QUALITY - STANDARD METHOD FOR THE DETERMINATION OF MERCURY DEPOSITION |
| 10/30196545 DC : 0 | BS EN ISO 12846 - WATER QUALITY - DETERMINATION OF MERCURY - METHOD USING ATOMIC ABSORPTION SPECTROMETRY (AAS) WITH AND WITHOUT ENRICHMENT |
| PD CLC/TS 50625-3-5:2017 | Collection, logistics & Treatment requirements for WEEE Technical specification for de-pollution. Photovoltaic panels |
| S.R. CLC/TS 50625-3-3:2017 | COLLECTION, LOGISTICS & TREATMENT REQUIREMENTS FOR WEEE - PART 3-3: SPECIFICATION FOR DE-POLLUTION - WEEE CONTAINING CRTS AND FLAT PANEL DISPLAYS |
| BS EN ISO 17072-2:2011 | Leather. Chemical determination of metal content Total metal content |
| DIN EN 15853:2010-11 | Ambient air quality - Standard method for the determination of mercury deposition |
| DIN EN ISO 17072-1:2011-06 | LEATHER - CHEMICAL DETERMINATION OF METAL CONTENT - PART 1: EXTRACTABLE METALS |
| 09/30199120 DC : 0 | BS EN ISO 17072-1 - LEATHER - CHEMICAL DETERMINATION OF METAL CONTENT - PART 1: EXTRACTABLE METALS |
| S.R. CLC/TS 50625-3-2:2016 | COLLECTION, LOGISTICS & TREATMENT REQUIREMENTS FOR WEEE - PART 3-2: TECHNICAL SPECIFICATION FOR DE-POLLUTION - LAMPS |
| NF EN ISO 17072-2 : 2011 | LEATHER - CHEMICAL DETERMINATION OF METAL CONTENT - PART 2: TOTAL METAL CONTENT |
| ISO 5667-3:2012 | Water quality Sampling Part 3: Preservation and handling of water samples |
| EN ISO 5667-3:2012 | Water quality - Sampling - Part 3: Preservation and handling of water samples (ISO 5667-3:2012) |
| DIN EN 1483:2007-07 | WATER QUALITY - DETERMINATION OF MERCURY - METHOD USING ATOMIC ABSORPTION SPECTROMETRY |
| EN ISO 12846:2012 | Water quality - Determination of mercury - Method using atomic absorption spectrometry (AAS) with and without enrichment (ISO 12846:2012) |
| CEN/TR 16184:2011 | Characterization of Waste - State-of-the-art document - Analysis of eluates |
| DIN EN ISO 12846:2012-08 | Water quality - Determination of mercury - Method using atomic absorption spectrometry (AAS) with and without enrichment (ISO 12846:2012) |
| S.R. CLC/TS 50625-3-5:2017 | COLLECTION, LOGISTICS & TREATMENT REQUIREMENTS FOR WEEE - PART 3-5: TECHNICAL SPECIFICATION FOR DE-POLLUTION - PHOTOVOLTAIC PANELS |
| I.S. EN 16711-1:2015 | TEXTILES - DETERMINATION OF METAL CONTENT - PART 1: DETERMINATION OF METALS USING MICROWAVE DIGESTION |
| 10/30233988 DC : 0 | BS EN 16192 - CHARACTERIZATION OF WASTE - ANALYSIS OF ELUATES |
| CLC/TS 50625-3-5:2017 | Collection, logistics & Treatment requirements for WEEE - Part 3-5: Technical specification for de-pollution - Photovoltaic panels |
| CLC/TS 50625-3-3:2017 | Collection, logistics & treatment requirements for WEEE - Part 3-3: Specification for de-pollution - WEEE containing CRTs and flat panel displays |
| I.S. EN ISO 17072-1:2011 | LEATHER - CHEMICAL DETERMINATION OF METAL CONTENT - PART 1: EXTRACTABLE METALS |
| NF EN ISO 17072-1 : 2011 | LEATHER - CHEMICAL DETERMINATION OF METAL CONTENT - PART 1: EXTRACTABLE METAL |
| UNI EN ISO 5667-3 : 2013 | WATER QUALITY - SAMPLING - PART 3: PRESERVATION AND HANDLING OF WATER SAMPLES |
| UNE-EN ISO 5667-3:2013 | Water quality - Sampling - Part 3: Preservation and handling of water samples (ISO 5667-3:2012) |
| UNI EN ISO 17072-1 : 2011 | LEATHER - CHEMICAL DETERMINATION OF METAL CONTENT - PART 1: EXTRACTABLE METALS |
| CLC/TS 50625-3-2:2016 | Collection, logistics & Treatment requirements for WEEE - Part 3-2: Technical specification for de-pollution - Lamps |
| DIN EN 1483:1997-08 | WATER QUALITY - DETERMINATION OF MERCURY - METHOD USING ATOMIC ABSORPTION SPECTROMETRY |
| ONORM EN ISO 17072-2 : 2011 | LEATHER - CHEMICAL DETERMINATION OF METAL CONTENT - PART 2: TOTAL METAL CONTENT |
| BS EN 16192:2011 | Characterization of waste. Analysis of eluates |
| DIN EN 16192:2012-02 | Characterization of waste - Analysis of eluates |
| 09/30199124 DC : 0 | BS EN ISO 17072-2 - LEATHER - CHEMICAL DETERMINATION OF METAL CONTENT - PART 2: TOTAL METAL CONTENT |
| BS EN 16711-1:2015 | Textiles. Determination of metal content Determination of metals using microwave digestion |
| UNI EN ISO 12846 : 2013 | WATER QUALITY - DETERMINATION OF MERCURY - METHOD USING ATOMIC ABSORPTION SPECTROMETRY (AAS) WITH AND WITHOUT ENRICHMENT |
| PD CLC/TS 50625-3-3:2017 | Collection, logistics & treatment requirements for WEEE Specification for de-pollution. WEEE containing CRTs and flat panel displays |
| 17/30360623 DC : 0 | BS EN ISO 17072-2 - LEATHER - CHEMICAL DETERMINATION OF METAL CONTENT - PART 2: TOTAL METAL CONTENT |
| ISO 17072-2:2011 | Leather Chemical determination of metal content Part 2: Total metal content |
| EN ISO 17072-1:2011 | Leather - Chemical determination of metal content - Part 1: Extractable metals (ISO 17072-1:2011) |
| I.S. EN 16192:2011 | CHARACTERIZATION OF WASTE - ANALYSIS OF ELUATES |
| UNI EN 15853 : 2010 | AMBIENT AIR QUALITY - STANDARD METHOD FOR THE DETERMINATION OF MERCURY DEPOSITION |
| UNE-EN 16711-2:2016 | Textiles - Determination of metal content - Part 2: Determination of metals extracted by acidic artificial perspiration solution |
| EN ISO 17072-2:2011 | Leather - Chemical determination of metal content - Part 2: Total metal content (ISO 17072-2:2011) |
| BS EN ISO 5667-3:2012 | Water quality. Sampling Preservation and handling of water samples |
| BS EN 1483:2007 | Water quality. Determination of mercury. Method using atomic absorption spectrometry |
| ISO 12846:2012 | Water quality — Determination of mercury — Method using atomic absorption spectrometry (AAS) with and without enrichment |
| BS EN ISO 17072-1:2011 | Leather. Chemical determination of metal content Extractable metals |
| BS EN ISO 12846:2012 | Water quality. Determination of mercury. Method using atomic absorption spectrometry (AAS) with and without enrichment |
| PD CLC/TS 50625-3-2:2016 | Collection, logistics & treatment requirements for WEEE Technical specification for de-pollution. Lamps |
| I.S. EN ISO 12846:2012 | WATER QUALITY - DETERMINATION OF MERCURY - METHOD USING ATOMIC ABSORPTION SPECTROMETRY (AAS) WITH AND WITHOUT ENRICHMENT (ISO 12846:2012) |
| I.S. EN ISO 17072-2:2011 | LEATHER - CHEMICAL DETERMINATION OF METAL CONTENT - PART 2: TOTAL METAL CONTENT |
| UNI EN ISO 17072-2 : 2011 | LEATHER - CHEMICAL DETERMINATION OF METAL CONTENT - PART 2: TOTAL METAL CONTENT |
| UNE-EN ISO 17072-2:2011 | Leather - Chemical determination of metal content - Part 2: Total metal content (ISO 17072-2:2011) |
| CEI CLC/TS 50625-3-2 : 1ED 2017 | COLLECTION, LOGISTICS & TREATMENT REQUIREMENTS FOR WEEE - PART 3-2: TECHNICAL SPECIFICATION FOR DE-POLLUTION - LAMPS |
| ISO 17072-1:2011 | Leather Chemical determination of metal content Part 1: Extractable metals |
| I.S. EN ISO 5667-3:2012 | WATER QUALITY - SAMPLING - PART 3: PRESERVATION AND HANDLING OF WATER SAMPLES (ISO 5667-3:2012) |
| S.R. CEN/TR 16184:2011 | CHARACTERIZATION OF WASTE - STATE-OF-THE-ART DOCUMENT - ANALYSIS OF ELUATES |
| UNE-CEN/TR 16184:2011 IN | Characterization of Waste - State-of-the-art document - Analysis of eluates |
| EN 16711-2:2015 | Textiles - Determination of metal content - Part 2: Determination of metals extracted by acidic artificial perspiration solution |
| EN 16711-1:2015 | Textiles - Determination of metal content - Part 1: Determination of metals using microwave digestion |
| EN 1483:2007 | Water quality - Determination of mercury - Method using atomic absorption spectrometry |
| EN 15853:2010 | Ambient air quality - Standard method for the determination of mercury deposition |
| 17/30360620 DC : 0 | BS EN ISO 17072-1 - LEATHER - CHEMICAL DETERMINATION OF METAL CONTENT - PART 1: EXTRACTABLE METALS |
| DIN EN 16711-1:2016-02 | TEXTILES - DETERMINATION OF METAL CONTENT - PART 1: DETERMINATION OF METALS USING MICROWAVE DIGESTION |
| BS EN 15853:2010 | Ambient air quality. Standard method for the determination of mercury deposition |
| BS EN 16711-2:2015 | Textiles. Determination of metal content Determination of metals extracted by acidic artificial perspiration solution |
| DIN EN ISO 17072-2:2011-06 | LEATHER - CHEMICAL DETERMINATION OF METAL CONTENT - PART 2: TOTAL METAL CONTENT |
| UNE-EN 16192:2012 | Characterization of waste - Analysis of eluates |
| I.S. EN 16711-2:2015 | TEXTILES - DETERMINATION OF METAL CONTENT - PART 2: DETERMINATION OF METALS EXTRACTED BY ACIDIC ARTIFICIAL PERSPIRATION SOLUTION |
| UNE-EN ISO 17072-1:2011 | Leather - Chemical determination of metal content - Part 1: Extractable metals (ISO 17072-1:2011) |
| ONORM EN ISO 17072-1 : 2011 | LEATHER - CHEMICAL DETERMINATION OF METAL CONTENT - PART 1: EXTRACTABLE METALS |
| DIN EN ISO 5667-3:2013-03 | WATER QUALITY - SAMPLING - PART 3: PRESERVATION AND HANDLING OF WATER SAMPLES (ISO 5667-3:2012) |
| UNE-EN 16711-1:2016 | Textiles - Determination of metal content - Part 1: Determination of metals using microwave digestion |
| UNI EN 16192 : 2012 | CHARACTERIZATION OF WASTE - ANALYSIS OF ELUATES |
| UNE-EN 15853:2010 | Ambient air quality - Standard method for the determination of mercury deposition |
| CEI CLC/TS 50625-3-3 : 1ED 2018 | COLLECTION, LOGISTICS & TREATMENT REQUIREMENTS FOR WEEE - PART 3-3: SPECIFICATION FOR DE-POLLUTION - WEEE CONTAINING CRTS AND FLAT PANEL DISPLAY |
| EN 16192:2011 | Characterization of waste - Analysis of eluates |
| ISO 5667-2:1991 | Water quality Sampling Part 2: Guidance on sampling techniques |
| ISO 5667-3:2012 | Water quality Sampling Part 3: Preservation and handling of water samples |
| ISO 5667-1:2006 | Water quality Sampling Part 1: Guidance on the design of sampling programmes and sampling techniques |
| EN 13506 : 2001 | WATER QUALITY - DETERMINATION OF MERCURY BY ATOMIC FLUORESCENCE SPECTROMETRY |
| ISO 5725-2:1994 | Accuracy (trueness and precision) of measurement methods and results Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method |
| ISO 3696:1987 | Water for analytical laboratory use — Specification and test methods |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.