07/30174185 DC : 0
|
BS EN ISO 1461 - HOT DIP GALVANIZED COATINGS ON FABRICATED IRON AND STEEL ARTICLES - SPECIFICATIONS AND TEST METHODS |
UNE-EN ISO 12670:2016
|
Thermal spraying - Components with thermally sprayed coatings - Technical supply conditions (ISO 12670:2011) |
UNI EN ISO 12690 : 2011
|
METALLIC AND OTHER INORGANIC COATINGS - THERMAL SPRAY COORDINATION - TASKS AND RESPONSIBILITIES |
BS EN ISO 12670:2015
|
Thermal spraying. Components with thermally sprayed coatings. Technical supply conditions |
08/30175210 DC : DRAFT APR 2008
|
BS EN 15773 - INDUSTRIAL APPLICATION OF POWDER ORGANIC COATINGS TO HOT DIP GALVANIZED AND SHERARDIZED STEEL ARTICLES [DUPLEX SYSTEMS] - SPECIFICATIONS, RECOMMENDATIONS AND GUIDELINES |
09/30196832 DC : 0
|
BS ISO 12690 - THERMAL SPRAYING - THERMAL SPRAY COORDINATION - TASKS AND RESPONSIBILITIES |
ISO 1823:2015
|
Rubber hose and hose assemblies for oil suction and discharge service Specification |
BS EN 50341-1:2012
|
Overhead electrical lines exceeding AC 1 kV General requirements. Common specifications |
ISO 21172-1:2015
|
Gas cylinders Welded steel pressure drums up to 3 000 litres capacity for the transport of gases Design and construction Part 1: Capacities up to 1 000 litres |
EN 15773:2018
|
Industrial application of powder organic coatings to hot dip galvanized or sherardized steel articles [duplex systems] - Specifications, recommendations and guidelines |
I.S. EN 15773:2018
|
INDUSTRIAL APPLICATION OF POWDER ORGANIC COATINGS TO HOT DIP GALVANIZED OR SHERARDIZED STEEL ARTICLES [DUPLEX SYSTEMS] - SPECIFICATIONS, RECOMMENDATIONS AND GUIDELINES |
BS EN 1765:2004
|
Rubber hose assemblies for oil suction and discharge services. Specification for the assemblies |
BS EN 14616:2004
|
Thermal spraying. Recommendations for thermal spraying |
DIN EN 15520:2007-11
|
Thermal spraying - Recommendations for constructional design of components with thermally sprayed coatings |
DIN EN 14616:2005-02
|
THERMAL SPRAYING - RECOMMENDATIONS FOR THERMAL SPRAYING |
DIN EN 1090-2:2011-10
|
EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
I.S. EN ISO 13123:2011
|
METALLIC AND OTHER INORGANIC COATINGS - TEST METHOD OF CYCLIC HEATING FOR THERMAL-BARRIER COATINGS UNDER TEMPERATURE GRADIENT (ISO 13123:2011) |
16/30323507 DC : 0
|
BS EN 15773 - INDUSTRIAL APPLICATION OF POWDER ORGANIC COATINGS TO HOT DIP GALVANIZED OR SHERARDIZED STEEL ARTICLES [DUPLEX SYSTEMS] - SPECIFICATIONS, RECOMMENDATIONS AND GUIDELINES |
BS EN 13507:2010
|
Thermal spraying. Pre-treatment of surfaces of metallic parts and components for thermal spraying |
I.S. EN 15311:2007
|
THERMAL SPRAYING - COMPONENTS WITH THERMALLY SPRAYED COATINGS - TECHNICAL SUPPLY CONDITIONS |
UNI EN ISO 13123 : 2012
|
METALLIC AND OTHER INORGANIC COATINGS - TEST METHOD OF CYCLIC HEATING FOR THERMAL-BARRIER COATINGS UNDER TEMPERATURE GRADIENT |
07/30174613 DC : 0
|
BS ISO 20340 - PAINTS AND VARNISHES - PERFORMANCE REQUIREMENTS FOR PROTECTIVE PAINT SYSTEMS FOR OFFSHORE AND RELATED STRUCTURES |
PREN 1090-2 : DRAFT 2015
|
EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
16/30337293 DC : 0
|
BS EN ISO 12944-9 - PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 9: PROTECTIVE PAINT SYSTEMS AND LABORATORY PERFORMANCE TEST METHODS FOR OFFSHORE AND RELATED STRUCTURES |
UNE-EN 1090-2:2011
|
Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures |
API SPEC 16F : 2017
|
SPECIFICATION FOR MARINE DRILLING RISER EQUIPMENT |
UNE-EN 13507:2011
|
Thermal spraying - Pre-treatment of surfaces of metallic parts and components for thermal spraying |
I.S. EN ISO 12736:2014
|
PETROLEUM AND NATURAL GAS INDUSTRIES - WET THERMAL INSULATION COATINGS FOR PIPELINES, FLOW LINES, EQUIPMENT AND SUBSEA STRUCTURES (ISO 12736:2014) |
EN 50341-1:2012
|
Overhead electrical lines exceeding AC 1 kV - Part 1: General requirements - Common specifications |
BS EN 1090-2 : 2008
|
EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
DIN EN 1090-2:2015-07 (Draft)
|
EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
UNI EN 1090-2 : 2011
|
EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
DIN EN 14475:2006-04
|
EXECUTION OF SPECIAL GEOTECHNICAL WORKS - REINFORCED FILL |
UNE-EN 1765:2017
|
Rubber hose assemblies for oil suction and discharge services - Specification for the assemblies |
I.S. EN ISO 14921:2010
|
THERMAL SPRAYING - PROCEDURES FOR THE APPLICATION OF THERMALLY SPRAYED COATINGS FOR ENGINEERING COMPONENTS |
I.S. EN 40-5:2002
|
LIGHTING COLUMNS - PART 5: REQUIREMENTS FOR STEEL LIGHTING COLUMNS |
I.S. EN ISO 1461:2009
|
HOT DIP GALVANIZED COATINGS ON FABRICATED IRON AND STEEL ARTICLES - SPECIFICATIONS AND TEST METHODS |
BS EN ISO 12690:2010
|
Metallic and other inorganic coatings. Thermal spray coordination. Tasks and responsibilities |
15/30320416 DC : 0
|
BS EN 1090-2 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
11/30187339 DC : 0
|
BS EN ISO 12736 - PETROLEUM AND NATURAL GAS INDUSTRIES - WET THERMAL INSULATION COATINGS FOR PIPELINES, FLOW LINES, EQUIPMENT AND SUBSEA STRUCTURES |
BS ISO 21172-1:2015
|
Gas cylinders. Welded steel pressure drums up to 3 000 litres capacity for the transport of gases. Design and construction Capacities up to 1 000 litres |
DIN EN ISO 12670 E : 2015
|
THERMAL SPRAYING - COMPONENTS WITH THERMALLY SPRAYED COATINGS - TECHNICAL SUPPLY CONDITIONS (ISO 12670:2011) |
ISO 20340:2009
|
Paints and varnishes Performance requirements for protective paint systems for offshore and related structures |
I.S. EN ISO 12670:2015
|
THERMAL SPRAYING - COMPONENTS WITH THERMALLY SPRAYED COATINGS - TECHNICAL SUPPLY CONDITIONS (ISO 12670:2011) |
NF EN ISO 13123 : 2012
|
METALLIC AND OTHER INORGANIC COATINGS - TEST METHOD OF CYCLIC HEATING FOR THERMAL-BARRIER COATINGS UNDER TEMPERATURE GRADIENT |
CEI EN 50341-1 : 2013
|
OVERHEAD ELECTRICAL LINES EXCEEDING AC 1 KV - PART 1: GENERAL REQUIREMENTS - COMMON SPECIFICATIONS |
UNE-EN 15773:2010
|
Industrial application of powder organic coatings to hot dip galvanized or sherardized steel articles [duplex systems] - Specifications, recommendations and guidelines |
EN 1090-2:2008+A1:2011
|
EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
ISO 10721-2:1999
|
Steel structures — Part 2: Fabrication and erection |
DIN EN 15520 E : 2007
|
THERMAL SPRAYING - RECOMMENDATIONS FOR CONSTRUCTIONAL DESIGN OF COMPONENTS WITH THERMALLY SPRAYED COATINGS |
BS EN 14475:2006
|
Execution of special geotechnical works. Reinforced fill |
BS EN ISO 14923:2003
|
Thermal spraying. Characterization and testing of thermally sprayed coatings |
ISO 13123:2011
|
Metallic and other inorganic coatings — Test method of cyclic heating for thermal-barrier coatings under temperature gradient |
EN ISO 1461:2009
|
Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods (ISO 1461:2009) |
EN ISO 14924:2005
|
Thermal spraying - Post-treatment and finishing of thermally sprayed coatings (ISO 14924:2005) |
EN ISO 14923:2003
|
Thermal spraying - Characterization and testing of thermally sprayed coatings (ISO 14923:2003) |
UNI EN ISO 1461 : 2009
|
HOT DIP GALVANIZED COATINGS ON FABRICATED IRON AND STEEL ARTICLES - SPECIFICATIONS AND TEST METHODS |
UNI EN ISO 14921 : 2011
|
THERMAL SPRAYING - PROCEDURES FOR THE APPLICATION OF THERMALLY SPRAYED COATINGS FOR ENGINEERING COMPONENTS |
UNI EN 14475 : 2006
|
EXECUTION OF SPECIAL GEOTECHNICAL WORKS - REINFORCED FILL |
UNI EN 40-5 : 2003
|
LIGHTING COLUMNS - REQUIREMENTS FOR STEEL LIGHTING COLUMNS |
UNE-EN ISO 12690:2011
|
Metallic and other inorganic coatings - Thermal spray coordination - Tasks and responsibilities (ISO 12690:2010) |
09/30197687 DC : 0
|
BS ISO 14921 - THERMAL SPRAYING - PROCEDURES FOR THE APPLICATION OF THERMALLY SPRAYED COATINGS FOR ENGINEERING COMPONENTS |
BS EN ISO 12736:2014
|
Petroleum and natural gas industries. Wet thermal insulation coatings for pipelines, flow lines, equipment and subsea structures |
BS ISO 12670 : 2011 COR 2015
|
THERMAL SPRAYING - COMPONENTS WITH THERMALLY SPRAYED COATINGS - TECHNICAL SUPPLY CONDITIONS |
10/30196823 DC : 0
|
BS ISO 12670 - THERMAL SPRAYING - COMPONENTS WITH THERMALLY SPRAYED COATINGS - TECHNICAL SUPPLY CONDITIONS |
12/30260570 DC : 0
|
BS EN 50341-1 - OVERHEAD ELECTRICAL LINES EXCEEDING AC 1 KV - PART 1: GENERAL REQUIREMENTS - COMMON SPECIFICATIONS |
BS EN ISO 13123:2011
|
Metallic and other inorganic Coatings. Test method of cyclic heating for thermal barrier coatings under temperature gradient |
BS EN ISO 14713-1:2017
|
Zinc coatings. Guidelines and recommendations for the protection against corrosion of iron and steel in structures General principles of design and corrosion resistance |
DIN EN ISO 14713-1:2010-05
|
ZINC COATINGS - GUIDELINES AND RECOMMENDATIONS FOR THE PROTECTION AGAINST CORROSION OF IRON AND STEEL IN STRUCTURES - PART 1: GENERAL PRINCIPLES OF DESIGN AND CORROSION RESISTANCE (ISO 14713-1:2017) |
13/30227963 DC : 0
|
BS ISO 1823 - RUBBER HOSE ASSEMBLIES FOR OIL SUCTION AND DISCHARGE SERVICE - SPECIFICATION |
BS ISO 1823:2015
|
Rubber hose and hose assemblies for oil suction and discharge service. Specification |
DIN EN ISO 14713-1 E : 2010
|
ZINC COATINGS - GUIDELINES AND RECOMMENDATIONS FOR THE PROTECTION AGAINST CORROSION OF IRON AND STEEL IN STRUCTURES - PART 1: GENERAL PRINCIPLES OF DESIGN AND CORROSION RESISTANCE (ISO 14713-1:2017) |
DIN EN ISO 13123:2012-04
|
Metallic and other inorganic coatings - Test method of cyclic heating for thermal-barrier coatings under temperature gradient (ISO 13123:2011) |
I.S. EN 13507:2010
|
THERMAL SPRAYING - PRE-TREATMENT OF SURFACES OF METALLIC PARTS AND COMPONENTS FOR THERMAL SPRAYING |
NF EN 1090-2 : 2009 + A1 2011
|
EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
UNI EN 13507 : 2010
|
THERMAL SPRAYING - PRE-TREATMENT OF SURFACES OF METALLIC PARTS AND COMPONENTS FOR THERMAL SPRAYING |
EN 13507:2010
|
Thermal spraying - Pre-treatment of surfaces of metallic parts and components for thermal spraying |
I.S. EN ISO 12690:2010
|
METALLIC AND OTHER INORGANIC COATINGS - THERMAL SPRAY COORDINATION - TASKS AND RESPONSIBILITIES |
DIN EN ISO 1461:2009-10
|
Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods (ISO 1461:2009) |
DIN EN 14475 E : 2006
|
EXECUTION OF SPECIAL GEOTECHNICAL WORKS - REINFORCED FILL |
BS EN 40-5:2002
|
Lighting columns Requirements for steel lighting columns |
ISO 12690:2010
|
Metallic and other inorganic coatings Thermal spray coordination Tasks and responsibilities |
ISO 14713-1:2017
|
Zinc coatings — Guidelines and recommendations for the protection against corrosion of iron and steel in structures — Part 1: General principles of design and corrosion resistance |
ISO 14924:2005
|
Thermal spraying Post-treatment and finishing of thermally sprayed coatings |
ISO 14921:2010
|
Thermal spraying Procedures for the application of thermally sprayed coatings for engineering components |
ISO 1461:2009
|
Hot dip galvanized coatings on fabricated iron and steel articles — Specifications and test methods |
UNE-EN 14475:2011
|
Execution of special geotechnical works - Reinforced fill |
BS EN 15311:2007
|
Thermal spraying. Components with thermally sprayed coatings. Technical supply conditions |
ISO 14923:2003
|
Thermal spraying Characterization and testing of thermally sprayed coatings |
UNE-EN ISO 14921:2011
|
Thermal spraying - Procedures for the application of thermally sprayed coatings for engineering components (ISO 14921:2010) |
BS EN ISO 1461:2009
|
Hot dip galvanized coatings on fabricated iron and steel articles. Specifications and test methods |
ISO 12736:2014
|
Petroleum and natural gas industries Wet thermal insulation coatings for pipelines, flow lines, equipment and subsea structures |
ISO 12670:2011
|
Thermal spraying — Components with thermally sprayed coatings — Technical supply conditions |
EN ISO 14921:2010
|
Thermal spraying - Procedures for the application of thermally sprayed coatings for engineering components (ISO 14921:2010) |
I.S. EN 15520:2007
|
THERMAL SPRAYING - RECOMMENDATIONS FOR CONSTRUCTIONAL DESIGN OF COMPONENTS WITH THERMALLY SPRAYED COATINGS |
EN 14616:2004
|
Thermal spraying - Recommendations for thermal spraying |
EN 40-5:2002
|
Lighting columns - Part 5: Requirements for steel lighting columns |
EN ISO 13123:2011
|
Metallic and other inorganic coatings - Test method of cyclic heating for thermal-barrier coatings under temperature gradient (ISO 13123:2011) |
EN ISO 14713-1:2017
|
Zinc coatings - Guidelines and recommendations for the protection against corrosion of iron and steel in structures - Part 1: General principles of design and corrosion resistance (ISO 14713-1:2017) |
EN 15311:2007
|
Thermal spraying - Components with thermally sprayed coatings - Technical supply conditions |
EN ISO 12736:2014
|
Petroleum and natural gas industries - Wet thermal insulation coatings for pipelines, flow lines, equipment and subsea structures (ISO 12736:2014) |
EN ISO 14713 : 1999
|
PROTECTION AGAINST CORROSION OF IRON AND STEEL IN STRUCTURES - ZINC AND ALUMINIUM COATINGS - GUIDELINES |
EN 14475:2006/AC:2006
|
EXECUTION OF SPECIAL GEOTECHNICAL WORKS - REINFORCED FILL |
EN ISO 12670:2015
|
Thermal spraying - Components with thermally sprayed coatings - Technical supply conditions (ISO 12670:2011) |
EN 15520:2007
|
Thermal spraying - Recommendations for constructional design of components with thermally sprayed coatings |
PREN 50341-1 : DRAFT 2012
|
OVERHEAD ELECTRICAL LINES EXCEEDING AC 1 KV - PART 1: GENERAL REQUIREMENTS - COMMON SPECIFICATIONS |
DIN EN ISO 12670:2015-12
|
THERMAL SPRAYING - COMPONENTS WITH THERMALLY SPRAYED COATINGS - TECHNICAL SUPPLY CONDITIONS (ISO 12670:2011) |
PREN 15773 : DRAFT 2016
|
INDUSTRIAL APPLICATION OF POWDER ORGANIC COATINGS TO HOT DIP GALVANIZED OR SHERARDIZED STEEL ARTICLES [DUPLEX SYSTEMS] - SPECIFICATIONS, RECOMMENDATIONS AND GUIDELINES |
17/30352980 DC : 0
|
BS EN ISO 14918 - THERMAL SPRAYING - QUALIFICATION TESTING OF THERMAL SPRAYERS |
13/30264471 DC : 0
|
BS ISO 21172-1 - GAS CYLINDERS - WELDED STEEL PRESSURE DRUMS UP TO 3000 LITRES CAPACITY FOR THE TRANSPORT OF GASES - DESIGN AND CONSTRUCTION - PART 1: CAPACITIES UP TO 1000 LITRES |
01/122232 DC : DRAFT JUNE 2001
|
BS ISO 20340 - PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PERFORMANCE REQUIREMENTS FOR PROTECTIVE PAINT SYSTEMS FOR OFFSHORE AND RELATED STRUCTURES |
BS 5649-4:1982
|
Lighting columns Recommendations for surface protection of metal lighting columns |
16/30337296 DC : 0
|
BS EN ISO 12944-4 - PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 4: TYPES OF SURFACE AND SURFACE PREPARATION |
I.S. EN ISO 14713-1:2017
|
ZINC COATINGS - GUIDELINES AND RECOMMENDATIONS FOR THE PROTECTION AGAINST CORROSION OF IRON AND STEEL IN STRUCTURES - PART 1: GENERAL PRINCIPLES OF DESIGN AND CORROSION RESISTANCE (ISO 14713-1:2017) |
UNE-EN ISO 14713-1:2017
|
Zinc coatings - Guidelines and recommendations for the protection against corrosion of iron and steel in structures - Part 1: General principles of design and corrosion resistance (ISO 14713-1:2017) |
DIN EN ISO 12690:2011-04
|
Metallic and other inorganic coatings - Thermal spray coordination - Tasks and responsibilities (ISO 12690:2010) |
I.S. EN 1090-2:2008
|
EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
I.S. EN 50341-1:2012
|
OVERHEAD ELECTRICAL LINES EXCEEDING AC 1 KV - PART 1: GENERAL REQUIREMENTS - COMMON SPECIFICATIONS |
BS EN ISO 14918:1998
|
Thermal spraying. Approval testing of thermal sprayers |
DIN EN 13507:2016-07 (Draft)
|
THERMAL SPRAYING - PRE-TREATMENT OF SURFACES OF METALLIC PARTS AND COMPONENTS FOR THERMAL SPRAYING |
BS EN 15520:2007
|
Thermal spraying. Recommendations for constructional design of components with thermally sprayed coatings |
ISO 14713:1999
|
Protection against corrosion of iron and steel in structures Zinc and aluminium coatings Guidelines |
BS EN ISO 14713:1999
|
Protection against corrosion of iron and steel in structures. Zinc and aluminium coatings. Guidelines |
BS EN ISO 14924:2005
|
Thermal spraying. Post-treatment and finishing of thermally sprayed coatings |
BS EN ISO 14921:2010
|
Thermal spraying. Procedures for the application of thermally sprayed coatings for engineering components |
DIN EN 15311:2007-06
|
THERMAL SPRAYING - COMPONENTS WITH THERMALLY SPRAYED COATINGS - TECHNICAL SUPPLY CONDITIONS |
DIN EN ISO 14921:2011-04
|
Thermal spraying - Procedures for the application of thermally sprayed coatings for engineering components (ISO 14921:2010) |
DIN EN ISO 14923:2003-10
|
THERMAL SPRAYING - CHARACTERIZATION AND TESTING OF THERMALLY SPRAYED COATINGS |
EN ISO 12690:2010
|
Metallic and other inorganic coatings - Thermal spray coordination - Tasks and responsibilities (ISO 12690:2010) |
DIN EN ISO 14924:2005-11
|
Thermal spraying - Post-treatment and finishing of thermally sprayed coatings (ISO 14924:2005) |