ISO 21013-2:2007
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
Cryogenic vessels — Pressure-relief accessories for cryogenic service — Part 2: Non-reclosable pressure-relief devices
Hardcopy , PDF
01-06-2007
02-11-2025
ISO 21013-2:2007 specifies the requirements for the design, manufacture and testing of non‑reclosable pressure‑relief devices for cryogenic service, i.e. for operation with cryogenic fluids in addition to operation at temperatures from ambient to cryogenic.
ISO 21013-2:2007 is restricted to bursting‑disc and buckling‑pin devices not exceeding a size of DN 200 designed to relieve single‑phase vapours or gases. A bursting‑disc or buckling‑pin assembly may be specified, constructed and tested such that it is suitable for use with more than one gas or with mixtures of gases.
ISO 21013-2:2007 does not provide methods for determining the capacity of bursting disc or buckling pin devices for a particular cryogenic vessel. Such methods are provided in ISO 21013-3.
| Committee |
ISO/TC 220
|
| DevelopmentNote |
Supersedes ISO/DIS 21013-2. (06/2007)
|
| DocumentType |
Standard
|
| Pages |
6
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes | |
| UnderRevision |
| Standards | Relationship |
| NEN ISO 21013-2 : 2007 | Identical |
| BS ISO 21013-2 : 2007 | Identical |
| 13/30271407 DC : DRAFT DEC 2013 | BS ISO 16924 - NATURAL GAS FUELLING STATIONS - LNG STATIONS FOR FUELLING VEHICLES |
| 16/30294444 DC : 0 | BS ISO 21029-1 - CRYOGENIC VESSELS - TRANSPORTABLE VACUUM INSULATED VESSELS OF NOT MORE THAN 1000 LITRES VOLUME - PART 1: DESIGN, FABRICATION, INSPECTION AND TESTS |
| ISO 16924:2016 | Natural gas fuelling stations — LNG stations for fuelling vehicles |
| BS EN ISO 16924:2018 | Natural gas fuelling stations. LNG stations for fuelling vehicles |
| ISO/TS 19880-1:2016 | Gaseous hydrogen — Fuelling stations — Part 1: General requirements |
| BS ISO 16924 : 2016 | NATURAL GAS FUELLING STATIONS - LNG STATIONS FOR FUELLING VEHICLES |
| 18/30350515 DC : 0 | BS ISO 20421-1 - CRYOGENIC VESSELS - LARGE TRANSPORTABLE VACUUM-INSULATED VESSELS - PART 1: DESIGN, FABRICATION, INSPECTION AND TESTING |
| 04/102832 DC : DRAFT JAN 2004 | ISO 13985 - LIQUID HYDROGEN - LAND VEHICLE FUEL TANKS |
| ISO/TS 20100:2008 | Gaseous hydrogen — Fuelling stations |
| ISO 21029-1:2018 | Cryogenic vessels — Transportable vacuum insulated vessels of not more than 1 000 litres volume — Part 1: Design, fabrication, inspection and tests |
| 18/30359998 DC : 0 | BS ISO 19880-1 - GASEOUS HYDROGEN - FUELLING STATIONS - PART 1: GENERAL REQUIREMENTS |
| DD ISO/TS 20100:2008 | Gaseous hydrogen. Fuelling stations |
| 11/30211394 DC : DRAFT MAR 2011 | BS ISO 20100 - GASEOUS HYDROGEN - FUELLING STATIONS |
| I.S. EN ISO 16924:2018 | NATURAL GAS FUELLING STATIONS - LNG STATIONS FOR FUELLING VEHICLES (ISO 16924:2016) |
| EN ISO 16924:2018 | Natural gas fuelling stations - LNG stations for fuelling vehicles (ISO 16924:2016) |
| ISO 11114-1:2012 | Gas cylinders — Compatibility of cylinder and valve materials with gas contents — Part 1: Metallic materials |
| ISO 21013-3:2016 | Cryogenic vessels — Pressure-relief accessories for cryogenic service — Part 3: Sizing and capacity determination |
| ISO 21010:2014 | Cryogenic vessels — Gas/materials compatibility |
| ASME PV CODE 8 DIV 1 : 2017 | BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS DIVISION 1 |
| ISO 6708:1995 | Pipework components — Definition and selection of DN (nominal size) |
| ISO 21028-1:2016 | Cryogenic vessels — Toughness requirements for materials at cryogenic temperature — Part 1: Temperatures below -80 degrees C |
| ISO 21028-2:2004 | Cryogenic vessels — Toughness requirements for materials at cryogenic temperature — Part 2: Temperatures between -80 degrees C and -20 degrees C |
| ISO 11114-2:2013 | Gas cylinders — Compatibility of cylinder and valve materials with gas contents — Part 2: Non-metallic materials |
| ISO 4126-2:2003 | Safety devices for protection against excessive pressure — Part 2: Bursting disc safety devices |
| CGA S 1.2 : 2009 | PRESSURE RELIEF DEVICE STANDARDS - PART 2: PORTABLE CONTAINERS FOR COMPRESSED GASES |
| ASME B16.34 : 2017 | VALVES - FLANGED, THREADED, AND WELDING END |
| ISO 20421-1:2006 | Cryogenic vessels — Large transportable vacuum-insulated vessels — Part 1: Design, fabrication, inspection and testing |
| ISO 21029-1:2004 | Cryogenic vessels — Transportable vacuum insulated vessels of not more than 1 000 litres volume — Part 1: Design, fabrication, inspection and tests |
| CGA S 1.3 : 2008 | PRESSURE RELIEF DEVICE STANDARDS - PART 3: STATIONARY STORAGE CONTAINERS FOR COMPRESSED GASES |
| ISO 21009-1:2008 | Cryogenic vessels — Static vacuum-insulated vessels — Part 1: Design, fabrication, inspection and tests |
| ISO 23208:2017 | Cryogenic vessels — Cleanliness for cryogenic service |
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.