ISO 23529:2016
Current
The latest, up-to-date edition.
Rubber General procedures for preparing and conditioning test pieces for physical test methods
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
French, English
27-10-2016
ISO 23529:2016 specifies general procedures for the preparation, measurement, marking, storage, and conditioning of rubber test pieces for use in physical tests specified in other International Standards, and the preferred conditions to be used during the tests. Special conditions, applicable to a particular test or material or simulating a particular climatic environment, are not included, nor are special requirements for testing whole products.
ISO 23529:2016 also specifies the requirements for the time interval to be observed between forming and testing of rubber test pieces and products. Such requirements are necessary to obtain reproducible test results and to minimize disagreements between customer and supplier.
DevelopmentNote |
Supersedes ISO 3383, ISO 4661-1, ISO 471 and ISO 4648. (09/2004) Supersedes ISO/DIS 23529. (10/2016)
|
DocumentType |
Standard
|
Pages |
17
|
PublisherName |
International Organization for Standardization
|
Status |
Current
|
Supersedes |
Standards | Relationship |
UNE-ISO 23529:2020 | Identical |
ÖNORM ISO 23529:2021 07 15 | Identical |
IS 13867 : 2021 | Identical |
DIN ISO 23529:2020-10 | Identical |
DIN ISO 23529:2020-01 (Draft) | Identical |
SS-ISO 23529:2017 | Identical |
BS ISO 23529:2016 | Identical |
UNI ISO 23529 : 2011 | Identical |
NEN ISO 23529 : 2016 | Identical |
NF ISO 23529 : 2017 | Identical |
UNI ISO 23529:2017 | Identical |
PN ISO 23529 : 2006 | Identical |
DIN ISO 23529:2012-10 | Identical |
ONORM ISO 23529 : 2014 | Identical |
GOST ISO 23529 : 2013 | Identical |
UNE-ISO 23529:2008 | Identical |
ISO 4642-1:2015 | Rubber and plastics hoses, non-collapsible, for fire-fighting service Part 1: Semi-rigid hoses for fixed systems |
ISO 23794:2015 | Rubber, vulcanized or thermoplastic — Abrasion testing — Guidance |
12/30255141 DC : 0 | BS ISO 17278 - RUBBER, RAW NATURAL - DETERMINATION OF GEL CONTENT OF TECHNICALLY SPECIFIED RUBBER (TSR) |
BS ISO 5603:2017 | Rubber, vulcanized. Determination of adhesion to wire cord |
ISO 4642-2:2015 | Rubber and plastics hoses, non-collapsible, for fire-fighting service Part 2: Semi-rigid hoses (and hose assemblies) for pumps and vehicles |
ISO 178:2010 | Plastics Determination of flexural properties |
BS ISO 2782-1:2016 | Rubber, vulcanized or thermoplastic. Determination of permeability to gases Differential-pressure methods |
06/30133200 DC : DRAFT APR 2006 | EN ISO 5999 - FLEXIBLE CELLULAR POLYMERIC MATERIALS - POLYURETHANE FOAM FOR LOAD-BEARING APPLICATIONS EXCLUDING CARPET UNDERLAY - SPECIFICATION |
DIN ISO 4649:2014-03 | Rubber, vulcanized or thermoplastic - Determination of abrasion resistance using a rotating cylindrical drum device (ISO 4649:2010) |
BS ISO 4662:2017 | Rubber, vulcanized or thermoplastic. Determination of rebound resilience |
BS ISO 1658:2015 | Natural rubber (NR). Evaluation procedure |
12/30212874 DC : 0 | BS EN ISO 6808 - PLASTICS HOSES AND HOSE ASSEMBLIES FOR SUCTION AND LOW-PRESSURE DISCHARGE OF PETROLEUM LIQUIDS - SPECIFICATION |
12/30254715 DC : 0 | BS EN ISO 5999 - FLEXIBLE CELLULAR POLYMERIC MATERIALS - POLYURETHANE FOAM FOR LOAD-BEARING APPLICATIONS EXCLUDING CARPET UNDERLAY - SPECIFICATION |
NF ISO 188 : 2011 | RUBBER, VULCANIZED OR THERMOPLASTIC - ACCELERATED AGEING AND HEAT RESISTANCE TESTS |
BS ISO 4647:2010 | Rubber, vulcanized. Determination of static adhesion to textile cord. H-pull test |
ISO 34-1:2015 | Rubber, vulcanized or thermoplastic Determination of tear strength Part 1: Trouser, angle and crescent test pieces |
07/30164313 DC : 0 | BS ISO 28702 - RUBBER AND PLASTICS HOSES - SUB-AMBIENT TEMPERATURE CRUSH TEST |
BS ISO 9924-3:2009 | Rubber and rubber products. Determination of the composition of vulcanizates and uncured compounds by thermogravimetry Hydrocarbon rubbers, halogenated rubbers and polysiloxane rubbers after extraction |
BS ISO 289-1:2015 | Rubber, unvulcanized. Determinations using a shearing-disc viscometer Determination of Mooney viscosity |
UNI ISO 4664-1 : 2012 | RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF DYNAMIC PROPERTIES - PART 1: GENERAL GUIDANCE |
07/30164024 DC : 0 | BS ISO 23233 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF RESISTANCE TO ABRASION USING A DRIVEN, VERTICAL ABRASIVE DISC |
09/30181563 DC : 0 | BS ISO 22762-1 - ELASTOMERIC SEISMIC-PROTECTION ISOLATORS - PART 1: TEST METHODS |
BS ISO 4664-1:2011 | Rubber, vulcanized or thermoplastic. Determination of dynamic properties General guidance |
17/30357593 DC : 0 | BS ISO 4666-4 - RUBBER, VULCANIZED - DETERMINATION OF TEMPERATURE RISE AND RESISTANCE TO FATIGUE IN FLEXOMETER TESTING - PART 4: CONSTANT-STRESS FLEXOMETER |
13/30265630 DC : 0 | BS ISO 2322 - STYRENE-BUTADIENE RUBBER (SBR) - EMULSION- AND SOLUTION-POLYMERIZED TYPES - EVALUATION PROCEDURES |
BS ISO 24453:2008 | Rubber. Acquisition and presentation of comparable single-point data |
UNE-EN ISO 10619-3:2012 | Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 3: Bending tests at high and low temperatures (ISO 10619-3:2011) |
13/30269270 DC : 0 | BS EN ISO 8030 - RUBBER AND PLASTICS HOSES - METHOD OF TEST FOR FLAMMABILITY |
DIN ISO 27588:2014-12 | RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF DEAD-LOAD HARDNESS USING THE VERY LOW RUBBER HARDNESS (VLRH) SCALE (ISO 27588:2012) |
ISO 3302-2:2008 | Rubber Tolerances for products Part 2: Geometrical tolerances |
ISO 9026:2007 | Raw rubber or unvulcanized compounds Determination of green strength |
05/30133330 DC : DRAFT MAY 2005 | ISO 4665 - RUBBER, VULCANIZED OR THERMOPLASTIC - RESISTANCE TO WEATHERING |
07/30148751 DC : 0 | BS ISO 2439 - FLEXIBLE CELLULAR POLYMERIC MATERIALS - DETERMINATION OF HARDNESS (INDENTATION TECHNIQUE) |
ISO 9563:2015 | Belt drives Electrical conductivity of antistatic endless synchronous belts Characteristics and test method |
ISO 10619-2:2017 | Rubber and plastics hoses and tubing Measurement of flexibility and stiffness Part 2: Bending tests at sub-ambient temperatures |
NF ISO 2921 : 2011 | RUBBER, VULCANIZED - DETERMINATION OF LOW-TEMPERATURE RETRACTION (TR TEST) |
11/30231429 DC : 0 | BS ISO 3384-2 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF STRESS RELAXATION IN COMPRESSION - PART 2: WITH TEMPERATURE CYCLING |
07/30164021 DC : 0 | BS ISO 27588 - RUBBER, VULCANIZED OR THERMOSET - DETERMINATION OF DEAD-LOAD HARDNESS USING THE VERY LOW RUBBER HARDNESS (VLRH) SCALE |
07/30151253 DC : 0 | BS ISO 25518 - DIPPED NATURAL-RUBBER GLOVES FOR MULTIPURPOSE APPLICATION - SPECIFICATION |
ISO 20872:2018 | Footwear — Test methods for outsoles — Tear strength |
BS ISO 5600:2017 | Rubber. Determination of adhesion to rigid materials using conical shaped parts |
BS EN ISO 30013:2011 | Rubber and plastics hoses. Methods of exposure to laboratory light sources. Determination of changes in colour, appearance and other physical properties |
ISO 1431-1:2012 | Rubber, vulcanized or thermoplastic Resistance to ozone cracking Part 1: Static and dynamic strain testing |
BS ISO 2781 : 2008 | RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF DENSITY |
BS ISO 1813:2014 | Belt drives. V-ribbed belts, joined V-belts and V-belts including wide section belts and hexagonal belts. Electrical conductivity of antistatic belts: Characteristics and methods of test |
07/30148747 DC : 0 | EN ISO 8067 - FLEXIBLE CELLULAR POLYMERIC MATERIALS - DETERMINATION OF TEAR STRENGTH |
12/30261828 DC : 0 | BS ISO 815-2 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF COMPRESSION SET - PART 2: AT LOW TEMPERATURES |
09/30193382 DC : 0 | BS ISO 4647 - RUBBER, VULCANIZED - DETERMINATION OF STATIC ADHESION TO TEXTILE CORD - H-PULL TEST |
DIN EN ISO 16012:2016-02 | PLASTICS - DETERMINATION OF LINEAR DIMENSIONS OF TEST SPECIMENS (ISO 16012:2015) |
17/30355057 DC : 0 | BS ISO 2781 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF DENSITY |
16/30343609 DC : 0 | BS ISO 22768 - RUBBER, RAW - DETERMINATION OF THE GLASS TRANSITION TEMPERATURE BY DIFFERENTIAL SCANNING CALORIMETRY (DSC) |
DIN ISO 13226:2015-12 | Rubber - Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers (ISO 13226:2011) |
ISO 8789:2009 | Rubber hoses and hose assemblies for liquefied petroleum gas in motor vehicles Specification |
15/30318244 DC : 0 | BS ISO 37 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF TENSILE STRESS-STRAIN PROPERTIES |
UNI ISO 8013 : 2013 | RUBBER, VULCANIZED - DETERMINATION OF CREEP IN COMPRESSION OR SHEAR |
ISO 1817:2015 | Rubber, vulcanized or thermoplastic Determination of the effect of liquids |
12/30243764 DC : 0 | BS ISO 2285 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF TENSION SET UNDER CONSTANT ELONGATION, AND OF TENSION SET, ELONGATION AND CREEP UNDER CONSTANT TENSILE LOAD |
BS ISO 18437-4:2008 | Mechanical vibration and shock. Characterization of the dynamic mechanical properties of visco-elastic materials Dynamic stiffness method |
BS ISO 1817:2015 | Rubber, vulcanized or thermoplastic. Determination of the effect of liquids |
BS ISO 2302:2014 | Isobutene-isoprene rubber (IIR). Evaluation procedure |
12/30269005 DC : 0 | BS EN 1844 - FLEXIBLE SHEETS FOR WATERPROOFING - DETERMINATION OF RESISTANCE TO OZONE - PLASTIC AND RUBBER SHEETS FOR ROOF WATERPROOFING |
12/30246396 DC : 0 | BS ISO 1813 - BELT DRIVES - V-RIBBED BELTS, JOINED V-BELTS AND V-BELTS INCLUDING WIDE SECTION BELTS AND HEXAGONAL BELTS - ELECTRICAL CONDUCTIVITY OF ANTISTATIC BELTS: CHARACTERISTICS AND METHODS OF TEST |
05/30133103 DC : DRAFT MAY 2005 | ISO 4664-2 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF DYNAMIC PROPERTIES - PART 2: TORSION PENDULUM METHODS AT LOW FREQUENCIES |
BS ISO 24454:2008 | Rubber. Acquisition and presentation of comparable multi-point data |
06/30149355 DC : 0 | EN ISO 1798 - FLEXIBLE CELLULAR POLYMERIC MATERIALS - DETERMINATION OF TENSILE STRENGTH AND ELONGATION AT BREAK |
DIN EN ISO 3821:2016-10 (Draft) | GAS WELDING EQUIPMENT - RUBBER HOSES FOR WELDING, CUTTING AND ALLIED PROCESSES |
BS ISO 22768:2017 | Rubber, raw. Determination of the glass transition temperature by differential scanning calorimetry (DSC) |
BS ISO 9631:2018 | Rubber seals. Joint rings for pipelines for hot-water supply up to 110 °C. Specification for the material |
BS ISO 2475:2011 | Chloroprene rubber (CR). General-purpose types. Evaluation procedure |
07/30148755 DC : 0 | BS ISO 24999 - FLEXIBLE CELLULAR POLYMERIC MATERIALS - DETERMINATION OF FATIGUE BY CONSTANT STRAIN PROCEDURE |
07/30166152 DC : 0 | BS ISO 2930 AMD1 - RUBBER, RAW NATURAL - DETERMINATION OF PLASTICITY RETENTION INDEX (PRI) |
BS ISO 814:2017 | Rubber, vulcanized or thermoplastic. Determination of adhesion to metal. Two-plate method |
09/30176542 DC : 0 | BS EN ISO 30013 - RUBBER AND THERMOPLASTICS HOSES - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - DETERMINATION OF CHANGES IN COLOUR, APPEARANCE AND OTHER PHYSICAL PROPERTIES |
07/30161736 DC : 0 | BS ISO 9924-3 - RUBBER AND RUBBER PRODUCTS - DETERMINATION OF THE COMPOSITION OF VULCANIZATES AND UNCURED COMPOUNDS BY THERMOGRAVIMETRY - PART 3: HYDROCARBON RUBBERS, HALOGENATED RUBBERS AND POLYSILOXANE RUBBERS AFTER EXTRACTION |
NF ISO 4647 : 2010 | RUBBER, VULCANIZED - DETERMINATION OF STATIC ADHESION TO TEXTILE CORD - H-PULL TEST |
07/30144606 DC : 0 | ISO 2393 - RUBBER TEST MIXES - PREPARATION, MIXING AND VULCANISATION - EQUIPMENT AND PROCEDURES |
DIN ISO 132:2015-06 | RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF FLEX CRACKING AND CRACK GROWTH (DE MATTIA) (ISO 132:2011) |
ISO 4665:2016 | Rubber, vulcanized or thermoplastic — Resistance to weathering |
ISO 37:2017 | Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties |
UNI EN ISO 10619-2 : 2012 | RUBBER AND PLASTICS HOSES AND TUBING - MEASUREMENT OF FLEXIBILITY AND STIFFNESS - PART 2: BENDING TESTS AT SUB-AMBIENT TEMPERATURES |
BS ISO 13226:2011 | Rubber. Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers |
ISO 4666-3:2016 | Rubber, vulcanized — Determination of temperature rise and resistance to fatigue in flexometer testing — Part 3: Compression flexometer (constant-strain type) |
ISO 5603:2017 | Rubber, vulcanized — Determination of adhesion to wire cord |
ONORM EN 13832-1 : 2006 | FOOTWEAR PROTECTING AGAINST CHEMICALS - PART 1: TERMINOLOGY AND TEST METHODS |
ISO 8013:2012 | Rubber, vulcanized Determination of creep in compression or shear |
ISO 7323:2006 | Rubber, raw and unvulcanized compounded — Determination of plasticity number and recovery number — Parallel-plate method |
I.S. EN ISO 10619-1:2018 | RUBBER AND PLASTICS HOSES AND TUBING - MEASUREMENT OF FLEXIBILITY AND STIFFNESS - PART 1: BENDING TESTS AT AMBIENT TEMPERATURE (ISO 10619-1:2017) |
17/30328799 DC : 0 | BS EN 549 - RUBBER MATERIALS FOR SEALS AND DIAPHRAGMS FOR GAS APPLIANCES AND GAS EQUIPMENT |
I.S. EN 15889:2011 | FIRE-FIGHTING HOSES - TEST METHODS |
I.S. EN ISO 8029:2014 | PLASTICS HOSE - GENERAL-PURPOSE COLLAPSIBLE WATER HOSE, TEXTILE-REINFORCED - SPECIFICATION (ISO 8029:2014) |
BS ISO 1431-1:2012 | Rubber, vulcanized or thermoplastic. Resistance to ozone cracking Static and dynamic strain testing |
DIN EN ISO 10619-1:2012-03 | RUBBER AND PLASTICS HOSES AND TUBING - MEASUREMENT OF FLEXIBILITY AND STIFFNESS - PART 1: BENDING TESTS AT AMBIENT TEMPERATURE (ISO 10619-1:2011) |
ISO 18437-5:2011 | Mechanical vibration and shock — Characterization of the dynamic mechanical properties of visco-elastic materials — Part 5: Poisson ratio based on comparison between measurements and finite element analysis |
ISO 28702:2008 | Rubber and plastics hoses and tubing Textile-reinforced types Sub-ambient temperature crush test |
NF ISO 13226 : 2011 | RUBBER - STANDARD REFERENCE ELASTOMERS (SRES) FOR CHARACTERIZING THE EFFECT OF LIQUIDS ON VULCANIZED RUBBERS |
ISO 2921:2011 | Rubber, vulcanized Determination of low-temperature retraction (TR test) |
NF ISO 4664-2 : 2006 | RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF DYNAMIC PROPERTIES - PART 2: TORSION PENDULUM METHOD AT LOW FREQUENCIES |
ISO 22762-1:2010 | Elastomeric seismic-protection isolators Part 1: Test methods |
ISO 36:2017 | Rubber, vulcanized or thermoplastic Determination of adhesion to textile fabrics |
ISO 18437-2:2005 | Mechanical vibration and shock — Characterization of the dynamic mechanical properties of visco-elastic materials — Part 2: Resonance method |
BS EN 13611:2015 | Safety and control devices for burners and appliances burning gaseous and/or liquid fuels. General requirements |
UNE-EN ISO 30013:2012 | Rubber and plastics hoses - Methods of exposure to laboratory light sources - Determination of changes in colour, appearance and other physical properties (ISO 30013:2011) |
NF ISO 7619-1 : 2010 | RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF INDENTATION HARDNESS - PART 1: DUROMETER METHOD (SHORE HARDNESS) |
ISO 27588:2012 | Rubber, vulcanized or thermoplastic Determination of dead-load hardness using the very low rubber hardness (VLRH) scale |
ISO 19013-1:2005 | Rubber hoses and tubing for fuel circuits for internal combustion engines Specification Part 1: Diesel fuels |
ISO 814:2017 | Rubber, vulcanized or thermoplastic Determination of adhesion to metal Two-plate method |
BIS IS 16209 : 2014 | RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - DETERMINATION OF RESISTANCE TO VACUUM |
NF EN ISO 1402 : 2009 | RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - HYDROSTATIC TESTING |
I.S. EN ISO 3821:2010 | GAS WELDING EQUIPMENT - RUBBER HOSES FOR WELDING, CUTTING AND ALLIED PROCESSES |
ISO 8307:2007 | Flexible cellular polymeric materials Determination of resilience by ball rebound |
AAMI ES60601-1 : 2005 : INC : AMD 1 : 2012 : R201200 | MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD) |
AAMI ES60601-1 : 2005 : INC : AMD 2 : 2012 : R201200 | MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD) |
UNE-EN 856:2015 | Rubber hoses and hose assemblies - Rubber-covered spiral wire reinforced hydraulic type - Specification |
AAMI ES60601-1 : 2005 : R2012 | MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD) |
ISO 6605:2017 | Hydraulic fluid power — Test methods for hoses and hose assemblies |
I.S. EN ISO 527-1:2012 | PLASTICS - DETERMINATION OF TENSILE PROPERTIES - PART 1: GENERAL PRINCIPLES (ISO 527-1:2012) |
BS EN 1844:2013 | Flexible sheets for waterproofing. Determination of resistance to ozone. Plastic and rubber sheets for roof waterproofing |
BS EN ISO 7233:2016 | Rubber and plastics hoses and hose assemblies. Determination of resistance to vacuum |
BS EN ISO 8033:2017 | Rubber and plastics hoses. Determination of adhesion between components |
UNE-EN ISO 8030:2015 | Rubber and plastics hoses - Method of test for flammability (ISO 8030:2014) |
UNE-EN 854:2015 | Rubber hoses and hose assemblies - Textile reinforced hydraulic type - Specification |
BS EN 857:2015 | Rubber hoses and hose assemblies. Wire braid reinforced compact type for hydraulic applications. Specification |
ISO 10619-3:2011 | Rubber and plastics hoses and tubing Measurement of flexibility and stiffness Part 3: Bending tests at high and low temperatures |
BS EN 14879-5:2007 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Linings on concrete components |
I.S. EN 854:2015 | RUBBER HOSES AND HOSE ASSEMBLIES - TEXTILE REINFORCED HYDRAULIC TYPE - SPECIFICATION |
DIN EN ISO 6808:2000-11 | PLASTICS HOSES AND HOSE ASSEMBLIES FOR SUCTION AND LOW-PRESSURE DISCHARGE OF PETROLEUM LIQUIDS - SPECIFICATION (ISO 6808:2014) |
DIN EN ISO 7326:2017-03 | RUBBER AND PLASTICS HOSES - ASSESSMENT OF OZONE RESISTANCE UNDER STATIC CONDITIONS (ISO 7326:2016) |
EN ISO 20344:2011 | Personal protective equipment - Test methods for footwear (ISO 20344:2011) |
DIN EN ISO 4080:2010-05 | Rubber and plastics hoses and hose assemblies - Determination of permeability to gas (ISO 4080:2009) |
DIN EN ISO 8308:2016-02 | RUBBER AND PLASTICS HOSES AND TUBING - DETERMINATION OF TRANSMISSION OF LIQUIDS THROUGH HOSE AND TUBING WALLS (ISO 8308:2015) |
DIN EN 15889:2011-09 | Fire-fighting hoses - Test methods |
DIN EN ISO 178:2013-09 | PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES (ISO 178:2010 + AMD.1:2013) |
DIN EN 853:2016-09 | Rubber hoses and hose assemblies - Wire braid reinforced hydraulic type - Specification |
UNI ISO 2781 : 2011 | RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF DENSITY |
ASTM G 74 : 2013 : REDLINE | Standard Test Method for Ignition Sensitivity of Nonmetallic Materials and Components by Gaseous Fluid Impact |
11/30244908 DC : 0 | BS EN ISO 3994 - PLASTICS HOSES - HELICAL-THERMOPLASTIC-REINFORCED THERMOPLASTICS HOSES FOR SUCTION AND DISCHARGE OF AQUEOUS MATERIALS - SPECIFICATION |
11/30212455 DC : 0 | BS ISO 3387 - RUBBER - DETERMINATION OF CRYSTALLIZATION EFFECTS BY HARDNESS MEASUREMENTS |
11/30242926 DC : DRAFT MAY 2011 | BS ISO 12000 - PLASTICS/RUBBER - POLYMER DISPERSIONS AND RUBBER LATICES (NATURAL AND SYNTHETIC) - DEFINITIONS AND REVIEW OF TEST METHODS |
15/30317639 DC : 0 | BS ISO 6804 - RUBBER AND PLASTICS INLET HOSES AND HOSE ASSEMBLIES FOR WASHING-MACHINES AND DISHWASHERS - SPECIFICATION |
UNE-ISO 4664-1:2011 | Rubber, vulcanised or thermoplastic. Determination of dynamic properties. Parte 1: General guidance |
I.S. EN ISO 178:2010 | PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES (ISO 178:2010) |
UNE-ISO 37:2013 | Rubber, vulcanised or thermoplastic. Determination of tensile stress-strain properties |
14/30296041 DC : 0 | BS ISO 23794 - RUBBER, VULCANIZED OR THERMOPLASTIC - ABRASION TESTING - GUIDANCE |
07/30162647 DC : 0 | BS ISO 7743 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF COMPRESSION STRESS-STRAIN PROPERTIES |
PD ISO/TS 16096:2014 | Reclaimed isobutene-isoprene (IIR) rubber. Evaluation procedure |
EN IEC 61730-2:2018/AC:2018-06 | PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 2: REQUIREMENTS FOR TESTING (IEC 61730-2:2016) |
DIN ISO 815-2:2016-09 | Rubber, vulcanized or thermoplastic - Determination of compression set - Part 2: At low temperatures (ISO 815-2:2014) |
09/30196780 DC : DRAFT JAN 2009 | BS ISO 12493 - RUBBER, VULCANIZED - DETERMINATION OF STRESS IN TENSION ON HEATING |
16/30334939 DC : 0 | BS ISO 4666-3 - RUBBER, VULCANIZED - DETERMINATION OF TEMPERATURE RISE AND RESISTANCE TO FATIGUE IN FLEXOMETER TESTING - PART 3: COMPRESSION FLEXOMETER (CONSTANT-STRAIN TYPE) |
BS ISO 4665:2016 | Rubber, vulcanized or thermoplastic. Resistance to weathering |
16/30334942 DC : 0 | BS ISO 23337 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF ABRASION RESISTANCE USING THE IMPROVED LAMBOURN TEST MACHINE |
10/30212482 DC : 0 | BS ISO 4658 - ACRYLONITRILE-BUTADIENE RUBBER (NBR) - EVALUATION PROCEDURE |
I.S. EN 13611:2015 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
BS ISO 4642-1:2015 | Rubber and plastics hoses, non-collapsible, for fire-fighting service Semi-rigid hoses for fixed systems |
11/30212461 DC : 0 | BS ISO 1432 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF LOW TEMPERATURE STIFFENING (GEHMAN TEST) |
PREN 681-1 : DRAFT 2016 | ELASTOMERIC SEALS - MATERIAL REQUIREMENTS FOR PIPE JOINT SEALS USED IN WATER AND DRAINAGE APPLICATIONS - PART 1: VULCANIZED RUBBER |
05/30129278 DC : DRAFT FEB 2005 | ISO/DIS 8029-2 - PLASTICS HOSE - GENERAL PURPOSE COLLAPSIBLE WATER HOSE, TEXTILE-REINFORCED - SPECIFICATION |
14/30255646 DC : 0 | BS ISO 4097 - RUBBER, ETHYLENE-PROPYLENE-DIENE (EPDM) - EVALUATION PROCEDURE |
BS ISO 2930:2017 | Rubber, raw natural. Determination of plasticity retention index (PRI) |
14/30304385 DC : 0 | BS ISO 34-2 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF TEAR STRENGTH - PART 2: SMALL (DELFT) TEST PIECES |
BS ISO 3384-2:2012 | Rubber, vulcanized or thermoplastic. Determination of stress relaxation in compression Testing with temperature cycling |
16/30334038 DC : 0 | BS EN ISO 1856 - FLEXIBLE CELLULAR POLYMERIC MATERIALS - DETERMINATION OF COMPRESSION SET |
BS ISO 6943:2017 | Rubber, vulcanized. Determination of tension fatigue |
ISO 4658:1999 | Acrylonitrile-butadiene rubber (NBR) Evaluation procedure |
BS ISO 5772:2015 | Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems. Specification |
06/30156380 DC : DRAFT SEP 2006 | BS ISO 1795 - RUBBER, RAW NATURAL AND RAW SYNTHETIC - SAMPLING AND FURTHER PREPARATIVE PROCEDURES |
15/30289114 DC : 0 | BS ISO 2782-1 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF PERMEABILITY TO GASES - PART 1: DIFFERENTIAL-PRESSURE METHODS |
BS ISO 6914:2013 | Rubber, vulcanized or thermoplastic. Determination of ageing characteristics by measurement of stress relaxation in tension |
ISO 4664-1:2011 | Rubber, vulcanized or thermoplastic — Determination of dynamic properties — Part 1: General guidance |
BS ISO 6123-1:2015 | Rubber or plastics covered rollers. Specifications Requirements for hardness |
09/30193376 DC : 0 | BS ISO 34-1 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF TEAR STRENGTH - PART 1: TROUSER, ANGLE AND CRESCENT TEST PIECES |
BS ISO 7619-1:2010 | Rubber, vulcanized or thermoplastic. Determination of indentation hardness Durometer method (Shore hardness) |
UNI ISO 2285 : 2013 | RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF TENSION SET UNDER CONSTANT ELONGATION, AND OF TENSION SET, ELONGATION AND CREEP UNDER CONSTANT TENSILE LOAD |
15/30317687 DC : 0 | BS EN ISO 8033 - RUBBER AND PLASTICS HOSES - DETERMINATION OF ADHESION BETWEEN COMPONENTS |
I.S. EN ISO 7326:2016 | RUBBER AND PLASTICS HOSES - ASSESSMENT OF OZONE RESISTANCE UNDER STATIC CONDITIONS |
NF EN ISO 3821 : 2010 | GAS WELDING EQUIPMENT - RUBBER HOSES FOR WELDING, CUTTING AND ALLIED PROCESSES |
NF ISO 4664-1 : 2012 | RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF DYNAMIC PROPERTIES - PART 1: GENERAL GUIDANCE |
UNI ISO 17052 : 2014 | RUBBER, RAW - DETERMINATION OF RESIDUAL MONOMERS AND OTHER VOLATILE LOW-MOLECULAR-MASS COMPOUNDS BY CAPILLARY GAS CHROMATOGRAPHY - THERMAL DESORPTION (DYNAMIC HEADSPACE) METHOD |
17/30334041 DC : 0 | BS EN ISO 8307 - FLEXIBLE CELLULAR POLYMERIC MATERIALS - DETERMINATION OF RESILIENCE BY BALL REBOUND |
UNE-ISO 3384-1:2017 | Rubber, vulcanize or thermoplastic. Determination of stress relaxation in compression. Part 1: Testing at constant temperature |
BS ISO 7267-2:2008 | Rubber-covered rollers. Determination of apparent hardness Shore-type durometer method |
BS ISO 2782:2006 | Rubber, vulcanized or thermoplastic. Determination of permeability to gases |
13/30281501 DC : 0 | BS EN 455-2 - MEDICAL GLOVES FOR SINGLE USE - PART 2: REQUIREMENTS AND TESTING FOR PHYSICAL PROPERTIES |
BS ISO 4097:2014 | Rubber, ethylene-propylene-diene (EPDM). Evaluation procedure |
07/30090853 DC : 0 | BS ISO 1658 - NATURAL RUBBER (NR) - EVALUATION PROCEDURE |
06/30147247 DC : DRAFT MAR 2006 | ISO 7267-3 - RUBBER-COVERED ROLLERS - DETERMINATION OF APPARENT HARDNESS - PART 3: PUSEY AND JONES METHOD |
11/30212449 DC : 0 | BS ISO 1431-1 - RUBBER, VULCANIZED OR THERMOPLASTIC - RESISTANCE TO OZONE CRACKING - PART 1: STATIC AND DYNAMIC STRAIN TESTING |
11/30247603 DC : 0 | BS ISO 2782-2 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF PERMEABILITY TO GASES - PART 2: EQUAL-PRESSURE METHOD |
13/30278483 DC : 0 | BS ISO 11346 - RUBBER, VULCANIZED OR THERMOPLASTIC - ESTIMATION OF LIFE-TIME AND MAXIMUM TEMPERATURE OF USE |
15/30317678 DC : 0 | BS EN ISO 7233 - RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES - GUIDELINES FOR SELECTION,STORAGE,USE AND MAINTENANCE |
BS ISO 37:2017 | Rubber, vulcanized or thermoplastic. Determination of tensile stress-strain properties |
05/30133100 DC : DRAFT MAY 2005 | ISO 812 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF LOW TEMPERATURE BRITTLENESS |
14/30301115 DC : 0 | BS EN 3207 - AEROSPACE SERIES - RUBBER COMPOUNDS - TECHNICAL SPECIFICATION |
BS ISO 9563:2015 | Belt drives. Electrical conductivity of antistatic endless synchronous belts. Characteristics and test method |
10/30167702 DC : 0 | BS ISO 4635 - RUBBER, VULCANIZED - PREFORMED JOINT SEALS FOR USE BETWEEN CONCRETE HIGHWAY PAVING SECTIONS - SPECIFICATION |
UNE-ISO 3387:2013 | Rubber. Determination of crystallization effects by hardness measurements. |
BS ISO 7663:2014 | Halogenated isobutene-isoprene rubber (BIIR and CIIR). Evaluation procedures |
BIS IS 3400-1 : 2012 | METHODS OF TEST FOR VULCANIZED RUBBER - PART 1: DETERMINATION OF TENSILE STRESS-STRAIN PROPERTIES |
BS ISO 2476:2014 | Butadiene rubber (BR). Solution-polymerized types. Evaluation procedures |
10/30212479 DC : 0 | BS ISO 2475 - CHLOROPRENE RUBBER (CR) - GENERAL-PURPOSE TYPES - EVALUATION PROCEDURE |
PREN 549 : DRAFT 2017 | RUBBER MATERIALS FOR SEALS AND DIAPHRAGMS FOR GAS APPLIANCES AND GAS EQUIPMENT |
ISO 22762-2:2010 | Elastomeric seismic-protection isolators Part 2: Applications for bridges Specifications |
12/30261825 DC : 0 | BS ISO 815-1 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF COMPRESSION SET - PART 1: AT AMBIENT OR ELEVATED TEMPERATURES |
08/30155570 DC : DRAFT APR 2008 | BS ISO 7231 - POLYMERIC MATERIALS, CELLULAR, FLEXIBLE DETERMINATION OF AIR FLOW VALUE AT CONSTANT PRESSURE-DROP |
16/30341349 DC : 0 | BS EN 2899 - AEROSPACE SERIES - VULCANIZED RUBBERS - TEST ON THE SUSCEPTIBILITY TO CORROSION IN A DAMP ATMOSPHERE OF METALS IN CONTACT WITH VULCANIZED RUBBERS |
06/30140687 DC : DRAFT MAY 2006 | ISO 815-2 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF COMPRESSION SET - PART 2: LOW TEMPERATURES |
06/30153862 DC : DRAFT JULY 2006 | BS ISO 8031 - RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - DETERMINATION OF ELECTRICAL PROPERTIES |
BS ISO 815-1:2014 | Rubber, vulcanized or thermoplastic. Determination of compression set At ambient or elevated temperatures |
ISO 2302:2014 | Isobutene-isoprene rubber (IIR) Evaluation procedure |
09/30193388 DC : DRAFT MAR 2009 | BS ISO 4666-1 - RUBBER, VULCANIZED - DETERMINATION OF TEMPERATURE RISE AND RESISTANCE TO FATIGUE IN FLEXOMETER TESTING - PART 1: BASIC PRINCIPLES |
DIN EN 15807:2011-05 | Railway applications - Pneumatic half couplings |
UNE-ISO 13226:2017 | Rubber. Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers. |
ISO 4081:2016 | Rubber hoses and tubing for cooling systems for internal-combustion engines Specification |
ISO 8028:2017 | Rubber and/or plastics hoses and hose assemblies for airless paint spraying — Specification |
ISO 3384-1:2011 | Rubber, vulcanized or thermoplastic Determination of stress relaxation in compression Part 1: Testing at constant temperature |
ISO 4195:2012 | Conveyor belts with heat-resistant rubber covers — Heat resistance of covers — Requirements and test methods |
ISO 4662:2017 | Rubber, vulcanized or thermoplastic Determination of rebound resilience |
UNE-ISO 815-2:2011 | Rubber, vulcanized or thermoplastic -- Determination of compression set -- Part 2: At low temperatures |
BS ISO 3384-1 : 2011 | RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF STRESS RELAXATIONIN COMPRESSION - PART 1: TESTING AT CONSTANT TEMPERATURE |
BS ISO 8013:2012 | Rubber, vulcanized. Determination of creep in compression or shear |
I.S. EN ISO 10619-3:2011 | RUBBER AND PLASTICS HOSES AND TUBING - MEASUREMENT OF FLEXIBILITY AND STIFFNESS - PART 3: BENDING TESTS AT HIGH AND LOW TEMPERATURES (ISO 10619-3:2011) |
UNE-EN ISO 7326:2017 | Rubber and plastics hoses - Assessment of ozone resistance under static conditions (ISO 7326:2016) |
UNE-ISO 812:2012 | Rubber, vulcanized or thermoplastic --Determination of low-temperature brittleness |
PREN 455-2 : DRAFT 2013 | MEDICAL GLOVES FOR SINGLE USE - PART 2: REQUIREMENTS AND TESTING FOR PHYSICAL PROPERTIES |
I.S. EN ISO 16012:2015 | PLASTICS - DETERMINATION OF LINEAR DIMENSIONS OF TEST SPECIMENS |
BS ISO 18437-3 : 2005 | MECHANICAL VIBRATION AND SHOCK - CHARACTERIZATION OF THE DYNAMIC MECHANICAL PROPERTIES OF VISCO-ELASTIC MATERIALS - PART 3: CANTILEVER SHEAR BEAM METHOD |
BS ISO 18437-2 : 2005 | MECHANICAL VIBRATION AND SHOCK - CHARACTERIZATION OF THE DYNAMIC MECHANICAL PROPERTIES OF VISCO-ELASTIC MATERIALS - PART 2: RESONANCE METHOD |
EN ISO 8028:2018 | Rubber and/or plastics hoses and hose assemblies for airless paint spraying - Specification (ISO 8028:2017) |
DIN EN ISO 10619-2:2012-03 | RUBBER AND PLASTICS HOSES AND TUBING - MEASUREMENT OF FLEXIBILITY AND STIFFNESS - PART 2: BENDING TESTS AT SUB-AMBIENT TEMPERATURES (ISO 10619-2:2011) |
ISO 6804:2016 | Rubber and plastics inlet hoses and hose assemblies for washing-machines and dishwashers — Specification |
ISO 6914:2013 | Rubber, vulcanized or thermoplastic Determination of ageing characteristics by measurement of stress relaxation in tension |
ISO 4097:2014 | Rubber, ethylene-propylene-diene (EPDM) Evaluation procedure |
ISO 4664-2:2006 | Rubber, vulcanized or thermoplastic — Determination of dynamic properties — Part 2: Torsion pendulum methods at low frequencies |
EN 13832-1:2006 | Footwear protecting against chemicals - Part 1: Terminology and test methods |
ISO 2476:2014 | Butadiene rubber (BR) — Solution-polymerized types — Evaluation procedures |
ISO 24454:2008 | Rubber Acquisition and presentation of comparable multi-point data |
ISO 815-1:2014 | Rubber, vulcanized or thermoplastic Determination of compression set Part 1: At ambient or elevated temperatures |
NF EN 15807 : 2011 | RAILWAY APPLICATIONS - PNEUMATIC HALF COUPLINGS |
UNE-ISO 289-1:2018 | Rubber, unvulcanized. Determinations using a shearing-disc viscometer. Part 1: Determination of Mooney viscosity |
I.S. EN ISO 10619-2:2018 | RUBBER AND PLASTICS HOSES AND TUBING - MEASUREMENT OF FLEXIBILITY AND STIFFNESS - PART 2: BENDING TESTS AT SUB-AMBIENT TEMPERATURES (ISO 10619-2:2017) |
17/30360051 DC : 0 | BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
ISO 24453:2008 | Rubber Acquisition and presentation of comparable single-point data |
BS ISO 2285:2013 | Rubber, vulcanized or thermoplastic. Determination of tension set underconstant elongation, and of tension set, elongation and creep underconstant tensile load |
UNI ISO 4664-2 : 2009 | RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF DYNAMIC PROPERTIES - PART 2: TORSION PENDULUM METHODS AT LOW FREQUENCIES |
BS ISO 2921:2011 | Rubber, vulcanized. Determination of low-temperature retraction (TR test) |
ISO 12493:2017 | Rubber, vulcanized — Determination of stress in tension upon heating |
IEC 61730-2:2016 | Photovoltaic (PV) module safety qualification - Part 2: Requirements for testing |
ISO 289-1:2015 | Rubber, unvulcanized Determinations using a shearing-disc viscometer Part 1: Determination of Mooney viscosity |
ISO 6943:2017 | Rubber, vulcanized Determination of tension fatigue |
ISO 27727:2008 | Rubber, vulcanized Measurement of fatigue crack growth rate |
ISO 23233:2016 | Rubber, vulcanized or thermoplastic Determination of resistance to abrasion using a driven, vertical abrasive disc |
ISO 527-1:2012 | Plastics Determination of tensile properties Part 1: General principles |
AAMI ES60601-1 : 2005 | MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD) |
I.S. EN 856:2015 | RUBBER HOSES AND HOSE ASSEMBLIES - RUBBER-COVERED SPIRAL WIRE REINFORCED HYDRAULIC TYPE - SPECIFICATION |
DIN EN ISO 7233:2015-10 (Draft) | RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - DETERMINATION OF RESISTANCE TO VACUUM (ISO 7233:2016) |
DIN EN ISO 1402:2010-04 | Rubber and plastics hoses and hose assemblies - Hydrostatic testing (ISO 1402:2009) |
UNE-EN ISO 3994:2014 | Plastics hoses - Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials - Specification (ISO 3994:2014) |
BS EN ISO 20344:2011 | Personal protective equipment. Test methods for footwear |
UNE-EN ISO 20344:2012 | Personal protective equipment - Test methods for footwear (ISO 20344:2011) |
UNE-EN ISO 8033:2017 | Rubber and plastics hoses - Determination of adhesion between components (ISO 8033:2016) |
BS EN ISO 8030:2014 | Rubber and plastics hoses. Method of test for flammability |
BS EN ISO 8031:2009 | Rubber and plastics hoses and hose assemblies. Determination of electrical resistance and conductivity |
I.S. EN ISO 2439:2009 | FLEXIBLE CELLULAR POLYMERIC MATERIALS - DETERMINATION OF HARDNESS (INDENTATION TECHNIQUE) |
I.S. EN ISO 8030:2014 | RUBBER AND PLASTICS HOSES - METHOD OF TEST FOR FLAMMABILITY (ISO 8030:2014) |
I.S. EN ISO 6179:2017 | RUBBER, VULCANIZED OR THERMOPLASTIC - RUBBER SHEETS AND RUBBER-COATED FABRICS - DETERMINATION OF TRANSMISSION RATE OF VOLATILE LIQUIDS (GRAVIMETRIC TECHNIQUE) (ISO 6179:2017) |
EN 15807:2011 | Railway applications - Pneumatic half couplings |
I.S. EN ISO 20344:2011 | PERSONAL PROTECTIVE EQUIPMENT - TEST METHODS FOR FOOTWEAR (ISO 20344:2011) |
DIN EN ISO 8030:2014-11 | RUBBER AND PLASTICS HOSES - METHOD OF TEST FOR FLAMMABILITY (ISO 8030:2014) |
I.S. EN ISO 1401:2016 | RUBBER HOSES FOR AGRICULTURAL SPRAYING (ISO 1401:2016) |
I.S. EN 1844:2013 | FLEXIBLE SHEETS FOR WATERPROOFING - DETERMINATION OF RESISTANCE TO OZONE - PLASTIC AND RUBBER SHEETS FOR ROOF WATERPROOFING |
DIN EN 13611:2019-06 | Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements |
I.S. EN ISO 5999:2013 | FLEXIBLE CELLULAR POLYMERIC MATERIALS - POLYURETHANE FOAM FOR LOAD-BEARING APPLICATIONS EXCLUDING CARPET UNDERLAY - SPECIFICATION (ISO 5999:2013) |
DIN EN ISO 3821:2010-07 | GAS WELDING EQUIPMENT - RUBBER HOSES FOR WELDING, CUTTING AND ALLIED PROCESSES |
I.S. EN ISO 14113:2013 | GAS WELDING EQUIPMENT - RUBBER AND PLASTICS HOSE AND HOSE ASSEMBLIES FOR USE WITH INDUSTRIAL GASES UP TO 450 BAR (45 MPA) (ISO 14113:2013) |
I.S. EN ISO 3994:2014 | PLASTICS HOSES - HELICAL-THERMOPLASTIC-REINFORCED THERMOPLASTICS HOSES FOR SUCTION AND DISCHARGE OF AQUEOUS MATERIALS - SPECIFICATION (ISO 3994:2014) |
I.S. EN ISO 8308:2015 | RUBBER AND PLASTICS HOSES AND TUBING - DETERMINATION OF TRANSMISSION OF LIQUIDS THROUGH HOSE AND TUBING WALLS (ISO 8308:2015) |
DIN EN ISO 8031:2010-04 | RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - DETERMINATION OF ELECTRICAL RESISTANCE AND CONDUCTIVITY |
I.S. EN ISO 7233:2016 | RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - DETERMINATION OF RESISTANCE TO VACUUM (ISO 7233:2016) |
I.S. EN 853:2015 | RUBBER HOSES AND HOSE ASSEMBLIES - WIRE BRAID REINFORCED HYDRAULIC TYPE - SPECIFICATION |
DIN EN 13832-1:2006-11 | FOOTWEAR PROTECTING AGAINST CHEMICALS - PART 1: TERMINOLOGY AND TEST METHODS |
DIN 53504:2009-10 | TESTING OF RUBBER - DETERMINATION OF TENSILE STRENGTH AT BREAK, TENSILE STRESS AT YIELD, ELONGATION AT BREAK AND STRESS VALUES IN A TENSILE TEST |
I.S. EN ISO 6808:2014 | PLASTICS HOSES AND HOSE ASSEMBLIES FOR SUCTION AND LOW-PRESSURE DISCHARGE OF PETROLEUM LIQUIDS - SPECIFICATION (ISO 6808:2014) |
I.S. EN 857:2015 | RUBBER HOSES AND HOSE ASSEMBLIES - WIRE BRAID REINFORCED COMPACT TYPE FOR HYDRAULIC APPLICATIONS - SPECIFICATION |
I.S. EN ISO 1402:2009 | RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - HYDROSTATIC TESTING |
I.S. EN ISO 8033:2017 | RUBBER AND PLASTICS HOSES - DETERMINATION OF ADHESION BETWEEN COMPONENTS (ISO 8033:2016) |
I.S. EN ISO 1798:2008 | FLEXIBLE CELLULAR POLYMERIC MATERIALS - DETERMINATION OF TENSILE STRENGTH AND ELONGATION AT BREAK |
DIN EN 1844:2013-08 | Flexible sheets for waterproofing - Determination of resistance to ozone - Plastic and rubber sheets for roof waterproofing |
UNI EN ISO 5999 : 2013 | FLEXIBLE CELLULAR POLYMERIC MATERIALS - POLYURETHANE FOAM FOR LOAD-BEARING APPLICATIONS EXCLUDING CARPET UNDERLAY - SPECIFICATION |
OVE/ONORM EN 60601-1 : 2014 | MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005 + COR.:2006 + COR.:2007 + A1:2012) |
16/30335293 DC : 0 | BS EN ISO 6179 - RUBBER, VULCANIZED OR THERMOPLASTIC - RUBBER SHEETS AND RUBBER-COATED FABRICS - DETERMINATION OF TRANSMISSION RATE OF VOLATILE LIQUIDS (GRAVIMETRIC TECHNIQUE) |
BS EN 15807:2011 | Railway applications. Pneumatic half couplings |
NF EN ISO 10619-3 : 2012 | RUBBER AND PLASTICS HOSES AND TUBING - MEASUREMENT OF FLEXIBILITY AND STIFFNESS - PART 3: BENDING TESTS AT HIGH AND LOW TEMPERATURES |
NF ISO 4666-1 : 2010 | RUBBER, VULCANIZED - DETERMINATION OF TEMPERATURE RISE AND RESISTANCE TO FATIGUE IN FLEXOMETER TESTING - PART 1: BASIC PRINCIPLES |
UNI ISO 7619-2 : 2011 | RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF INDENTATION HARDNESS - PART 2: IRHD POCKET METER METHOD |
06/30150431 DC : DRAFT MAY 2006 | ISO 4097 - RUBBER, ETHYLENE-PROPYLENE-DIENE (EPDM) - EVALUATION PROCEDURE |
BS ISO 3387:2012 | Rubber. Determination of crystallization effects by hardness measurements |
14/30295535 DC : 0 | BS ISO 5794-2 - RUBBER COMPOUNDING INGREDIENTS - SILICA, PRECIPITATED, HYDRATED - PART 2: EVALUATION PROCEDURES IN STYRENE-BUTADIENE RUBBER |
BS ISO 4195:2012 | Conveyor belts with heat-resistant rubber covers. Heat resistance of covers. Requirements and test methods |
BS EN ISO 8029:2014 | Plastics hose. General-purpose collapsible water hose, textile-reinforced. Specification |
17/30355054 DC : 0 | BS ISO 1853 - CONDUCTING AND DISSIPATIVE RUBBERS, VULCANIZED OR THERMOPLASTIC - MEASUREMENT OF RESISTIVITY |
BS ISO 2322:2014 | Styrene-butadiene rubber (SBR). Emulsion- and solution-polymerized types. Evaluation procedures |
PD ISO/TS 16097:2013 | Vulcanized crumb rubber. Evaluation procedures |
09/30182064 DC : 0 | BS ISO 22762-2 - ELASTOMERIC SEISMIC-PROTECTION ISOLATORS - PART 2: APPLICATIONS FOR BRIDGES - SPECIFICATIONS |
ISO 1853:2011 | Conducting and dissipative rubbers, vulcanized or thermoplastic Measurement of resistivity |
NF ISO 37 : 2018 | RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF TENSILE STRESS-STRAIN PROPERTIES |
07/30169250 DC : 0 | BS EN 421 - PROTECTIVE GLOVES AGAINST IONIZING RADIATION AND RADIOACTIVE CONTAMINATION |
UNI EN 15807 : 2011 | RAILWAY APPLICATIONS - PNEUMATIC HALF COUPLINGS |
14/30304382 DC : 0 | BS ISO 34-1 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF TEAR STRENGTH - PART 1: TROUSER, ANGLE AND CRESCENT TEST PIECES |
BS ISO 6605:2017 | Hydraulic fluid power. Test methods for hoses and hose assemblies |
UNE-ISO 34-2:2011 | Rubber, vulcanized or thermoplastic -- Determination of tear strength -- Part 2: Small (Delft) test pieces |
UNE-ISO 1795:2013 | Rubber, raw natural and raw synthetic — Sampling and further preparative procedures |
11/30244915 DC : 0 | BS EN ISO 8029 - PLASTICS HOSE - GENERAL-PURPOSE COLLAPSIBLE WATER HOSE, TEXTILE-REINFORCED - SPECIFICATION |
BIS IS 3400-9 : 2014 | METHODS OF TEST FOR VULCANIZED RUBBER - PART 9: RUBBER, VULCANIZED OR THERMOPLASTIC DETERMINATION OF DENSITY |
16/30318232 DC : 0 | BS ISO 4662 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF REBOUND RESILIENCE |
11/30212467 DC : 0 | BS ISO 8013 - RUBBER, VULCANIZED - DETERMINATION OF CREEP IN COMPRESSION OR SHEAR |
DIN ISO 48:2016-09 | Rubber, vulcanized or thermoplastic - Determination of hardness (hardness between 10 IRHD and 100 IRHD) (ISO 48:2010) |
BS ISO 6505:2015 | Rubber, vulcanized or thermoplastic. Determination of tendency to adhere to and corrode metals |
UNI ISO 1432 : 2013 | RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF LOW-TEMPERATURE STIFFENING (GEHMAN TEST) |
DIN ISO 812:2015-06 | Rubber, vulcanized or thermoplastic - Determination of low-temperature brittleness (ISO 812:2011) |
BS ISO 2321:2017 | Rubber threads. Methods of test |
DIN ISO 1827:2010-07 | RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF SHEAR MODULUS AND ADHESION TO RIGID PLATES - QUADRUPLE-SHEAR METHODS |
14/30296011 DC : 0 | BS ISO 6505 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF TENDENCY TO ADHERE TO AND CORRODE METALS |
14/30295541 DC : 0 | BS ISO 4659 - STYRENE-BUTADIENE RUBBER (CARBON BLACK OR CARBON BLACK AND OIL MASTERBATCHES) - EVALUATION PROCEDURE |
DIN ISO 2285:2013-12 | Rubber, vulcanized or thermoplastic - Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensile load (ISO 2285:2013) |
14/30293931 DC : 0 | BS ISO 19013-2 - RUBBER HOSES AND TUBING FOR FUEL CIRCUITS FOR INTERNAL COMBUSTION ENGINES - SPECIFICATION - PART 2: GASOLINE FUELS |
BS ISO 20057:2017 | Rubber household gloves. General requirements and test methods |
UNE-EN 15889:2013 | Fire-fighting hoses - Test methods |
EN ISO 7233:2016 | Rubber and plastics hoses and hose assemblies - Determination of resistance to vacuum (ISO 7233:2016) |
DIN EN ISO 30013:2012-03 | Rubber and plastics hoses - Methods of exposure to laboratory light sources - Determination of changes in colour, appearance and other physical properties (ISO 30013:2011) |
09/30193379 DC : DRAFT FEB 2009 | BS ISO 813 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF ADHESION TO A RIGID SUBSTRATE - 90 DEGREES PEEL METHOD |
UNE-ISO 2393:2013 | Rubber test mixes — Preparation, mixing and vulcanization — Equipment and procedures |
BS ISO 1795:2017 | Rubber, raw natural and raw synthetic. Sampling and further preparative procedures |
BS ISO 19013-1:2005 | Rubber hoses and tubing for fuel circuits for internal combustionengines . Specification Diesel fuels |
ISO 2322:2014 | Styrene-butadiene rubber (SBR) — Emulsion- and solution-polymerized types — Evaluation procedures |
BS ISO 7743:2017 | Rubber, vulcanized or thermoplastic. Determination of compression stress-strain properties |
ISO 34-2:2015 | Rubber, vulcanized or thermoplastic Determination of tear strength Part 2: Small (Delft) test pieces |
UNE-EN ISO 16012:2016 | Plastics - Determination of linear dimensions of test specimens (ISO 16012:2015) |
UNI EN ISO 3821 : 2010 | GAS WELDING EQUIPMENT - RUBBER HOSES FOR WELDING, CUTTING AND ALLIED PROCESSES |
BS ISO 11346:2014 | Rubber, vulcanized or thermoplastic. Estimation of life-time and maximum temperature of use |
06/30130353 DC : DRAFT MAY 2006 | ISO 6943 - RUBBER, VULCANIZED - DETERMINATION OF TENSION FATIGUE |
BIS IS 12656 : 2014 | RUBBER OR PLASTICS HOSES AND TUBING - BENDING TESTS |
BIS IS 3400-4 : 2012 | METHODS OF TEST FOR VULCANIZED RUBBER - PART 4: ACCELERATED AGEING AND HEAT RESISTANCE |
ISO 7267-1:2017 | Rubber-covered rollers Determination of apparent hardness Part 1: IRHD method |
BS ISO 23337:2016 | Rubber, vulcanized or thermoplastic. Determination of abrasion resistance using the Improved Lambourn test machine |
14/30295544 DC : 0 | BS ISO 7663 - HALOGENATED ISOBUTENE-ISOPRENE RUBBER (BIIR AND CIIR) - EVALUATION PROCEDURES |
BS ISO 28702:2008 | Rubber and plastics hoses and tubing. Textile reinforced types. Sub-ambient temperature crush test |
09/30193685 DC : 0 | BS ISO 4081 - RUBBER HOSES AND TUBING FOR COOLING SYSTEMS FOR INTERNAL-COMBUSTION ENGINES - SPECIFICATION |
BS ISO 6916-1:1995 | Flexible cellular polymeric materials. Sponge and expanded cellular rubber products. Specification Sheeting |
BS EN 15889:2011 | Fire-fighting hoses. Test methods |
DIN EN ISO 8029:2014-12 | PLASTICS HOSE - GENERAL-PURPOSE COLLAPSIBLE WATER HOSE, TEXTILE-REINFORCED - SPECIFICATION (ISO 8029:2014) |
17/30355087 DC : 0 | BS ISO 13226 - RUBBER - STANDARD REFERENCE ELASTOMERS (SRES) FOR CHARACTERIZING THE EFFECT OF LIQUIDS ON VULCANIZED RUBBERS |
BS ISO 4642-2:2015 | Rubber and plastics hoses, non-collapsible, for fire-fighting service Semi-rigid hoses (and hose assemblies) for pumps and vehicles |
08/30176630 DC : DRAFT JAN 2008 | BS ISO 2322 - STYRENE-BUTADIENE RUBBER (SBR) - EMULSION AND SOLUTION POLYMERIZED TYPES - EVALUATION PROCEDURES |
PREN 13832-1 : DRAFT 2017 | FOOTWEAR PROTECTING AGAINST CHEMICALS - PART 1: TERMINOLOGY AND TEST METHODS |
BS ISO 15113:2005 | Rubber. Determination of frictional properties |
07/30161675 DC : 0 | BS ISO 24454 - PHYSICAL TESTING OF RUBBER - ACQUISITION AND PRESENTATION OF COMPARABLE MULTI-POINT DATA |
BS EN ISO 8307:1998 | Flexible cellular polymeric materials. Determination of resilience |
BS ISO 7267-1:2017 | Rubber-covered rollers. Determination of apparent hardness IRHD method |
06/30133205 DC : DRAFT APR 2006 | EN ISO 8307 - FLEXIBLE CELLULAR POLYMERIC MATERIALS - DETERMINATION OF RESILIENCE BY BALL REBOUND |
BS ISO 815-2:2014 | Rubber, vulcanized or thermoplastic. Determination of compression set At low temperatures |
SAE J 2979 : 2012 | TEST METHOD FOR VULCANIZED RUBBER AND THERMOPLASTIC ELASTOMER DETERMINATION OF COMPRESSIVE STRESS RELAXATION (CSR) RESPONSE |
DIN ISO 34-1:2016-09 | RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF TEAR STRENGTH - PART 1: TROUSER, ANGLE AND CRESCENT TEST PIECES (ISO 34-1:2015) |
UNE-EN 15807:2011 | Railway applications - Pneumatic half couplings |
UNE-ISO 2921:2017 | Rubber, vulcanized. Determination of low temperature retraction (TR test) |
ISO 11346:2014 | Rubber, vulcanized or thermoplastic — Estimation of life-time and maximum temperature of use |
NF ISO 48 : 2010 | RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF HARDNESS (HARDNESS BETWEEN 10 IRHD AND 100 IRHD) |
ISO 13226:2011 | Rubber Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers |
I.S. EN ISO 30013:2011 | RUBBER AND PLASTICS HOSES - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - DETERMINATION OF CHANGES IN COLOUR, APPEARANCE AND OTHER PHYSICAL PROPERTIES (ISO 30013:2011) |
ISO 815-2:2014 | Rubber, vulcanized or thermoplastic Determination of compression set Part 2: At low temperatures |
ISO 24999:2008 | Flexible cellular polymeric materials Determination of fatigue by a constant-strain procedure |
I.S. EN 60601-1:2006&A1:2013&AC:2014&A12:2014 | MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE |
UNI ISO 7619-1 : 2011 | RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF INDENTATION HARDNESS - PART 1: DUROMETER METHOD (SHORE HARDNESS) |
ISO 2782-2:2012 | Rubber, vulcanized or thermoplastic Determination of permeability to gases Part 2: Equal-pressure method |
BS ISO 2303:2011 | Isoprene rubber (IR). Non-oil-extended, solution-polymerized types Evaluation procedures |
ISO 11752:2000 | Flexible cellular polymeric materials — Moulded and extruded sponge or expanded cellular rubber products — Compressibility test on finished parts |
UNI ISO 2303 : 2012 | ISOPRENE RUBBER (IR) - NON-OIL-EXTENDED, SOLUTION-POLYMERIZED TYPES - EVALUATION PROCEDURES |
UNI EN ISO 178 : 2013 | PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES |
ISO 6123-1:2015 | Rubber or plastics covered rollers — Specifications — Part 1: Requirements for hardness |
UNI EN ISO 8029 : 2014 | PLASTICS HOSE - GENERAL-PURPOSE COLLAPSIBLE WATER HOSE, TEXTILE-REINFORCED - SPECIFICATION |
UNI ISO 3384-1 : 2013 | RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF STRESS RELAXATION IN COMPRESSION - PART 1: TESTING AT CONSTANT TEMPERATURE |
PD IEC/TR 60601-4-3:2015 | Medical electrical equipment Guidance and interpretation. Considerations of unaddressed safety aspects in the third edition of IEC 60601-1 and proposals for new requirements |
BS ISO 813:2016 | Rubber, vulcanized or thermoplastic. Determination of adhesion to a rigid substrate. 90° peel method |
EN 16523-1:2015 | Determination of material resistance to permeation by chemicals - Part 1: Permeation by liquid chemical under conditions of continuous contact |
NF ISO 2475 : 2011 | CHLOROPRENE RUBBER (CR) - GENERAL-PURPOSE TYPES - EVALUATION PROCEDURE |
UNI ISO 7743 : 2012 | RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF COMPRESSION STRESS-STRAIN PROPERTIES |
EN ISO 10619-2:2018 | Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 2: Bending tests at sub-ambient temperatures (ISO 10619-2:2017) |
ISO 3384-2:2012 | Rubber, vulcanized or thermoplastic Determination of stress relaxation in compression Part 2: Testing with temperature cycling |
ISO 22768:2017 | Rubber, raw Determination of the glass transition temperature by differential scanning calorimetry (DSC) |
ISO 10282:2014 | Single-use sterile rubber surgical gloves — Specification |
EN ISO 8307:2007 | Flexible cellular polymeric materials - Determination of resilience by ball rebound (ISO 8307:2007) |
ISO 7267-3:2017 | Rubber-covered rollers Determination of apparent hardness Part 3: Pusey and Jones method |
EN 2899:2018 | Aerospace series - Vulcanized rubbers - Test on the susceptibility to corrosion in a damp atmosphere of metals in contact with vulcanized rubbers |
ONORM EN ISO 3821 : 2010 | GAS WELDING EQUIPMENT - RUBBER HOSES FOR WELDING, CUTTING AND ALLIED PROCESSES |
ISO 6505:2015 | Rubber, vulcanized or thermoplastic Determination of tendency to adhere to and corrode metals |
ISO 11193-1:2008 | Single-use medical examination gloves Part 1: Specification for gloves made from rubber latex or rubber solution |
EN ISO 10619-1:2018 | Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 1: Bending tests at ambient temperature (ISO 10619-1:2017) |
ISO 10619-1:2017 | Rubber and plastics hoses and tubing — Measurement of flexibility and stiffness — Part 1: Bending tests at ambient temperature |
ISO 16010:2005 | Elastomeric seals Material requirements for seals used in pipes and fittings carrying gaseous fuels and hydrocarbon fluids |
ISO/TS 16095:2014 | Reclaimed rubber derived from products containing mainly natural rubber Evaluation procedure |
IEC 60984:2014 | Live working - Electrical insulating sleeves |
ISO 4659:2014 | Styrene-butadiene rubber (carbon black or carbon black and oil masterbatches) Evaluation procedure |
ISO 7663:2014 | Halogenated isobutene-isoprene rubber (BIIR and CIIR) — Evaluation procedures |
ONORM EN ISO 527-1 : 2012 | PLASTICS - DETERMINATION OF TENSILE PROPERTIES - PART 1: GENERAL PRINCIPLES (ISO 527-1:2012) |
IEC 60903:2014 | Live working - Electrical insulating gloves |
ISO 9631:2018 | Rubber seals — Joint rings for pipelines for hot-water supply up to 110 °C — Specification for the material |
ISO 15113:2005 | Rubber — Determination of frictional properties |
DIN EN ISO 6808:2014-10 | PLASTICS HOSES AND HOSE ASSEMBLIES FOR SUCTION AND LOW-PRESSURE DISCHARGE OF PETROLEUM LIQUIDS - SPECIFICATION (ISO 6808:2014) |
DIN EN ISO 14113:2014-02 | GAS WELDING EQUIPMENT - RUBBER AND PLASTICS HOSE AND HOSE ASSEMBLIES FOR USE WITH INDUSTRIAL GASES UP TO 450 BAR (45 MPA) (ISO 14113:2013) |
DIN EN 455-2:2015-07 | Medical gloves for single use - Part 2: Requirements and testing for physical properties |
DIN EN ISO 3994:2015-11 | PLASTICS HOSES - HELICAL-THERMOPLASTIC-REINFORCED THERMOPLASTICS HOSES FOR SUCTION AND DISCHARGE OF AQUEOUS MATERIALS - SPECIFICATION (ISO 3994:2014) |
DIN EN ISO 7233:2017-03 | Rubber and plastics hoses and hose assemblies - Determination of resistance to vacuum (ISO 7233:2016) |
ISO 7326:2016 | Rubber and plastics hoses Assessment of ozone resistance under static conditions |
BS EN 853:2015 | Rubber hoses and hose assemblies. Wire braid reinforced hydraulic type. Specification |
ISO 1798:2008 | Flexible cellular polymeric materials Determination of tensile strength and elongation at break |
UNE-EN ISO 6808:2015 | Plastics hoses and hose assemblies for suction and low-pressure discharge of petroleum liquids - Specification (ISO 6808:2014) |
NF EN ISO 8031 : 2009 | RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - DETERMINATION OF ELECTRICAL RESISTANCE AND CONDUCTIVITY |
ISO 1401:2016 | Rubber hoses for agricultural spraying |
UNE-ISO 1431-1:2017 | Rubber, vulcanised or thermoplastic. Resistance to ozone cracking. Part 1: Static and dynamic strain testing |
UNE-EN 853:2015 | Rubber hoses and hose assemblies - Wire braid reinforced hydraulic type - Specification |
UNE-EN ISO 2440:2001 | Flexible and rigid cellular polymeric materials - Accelerated ageing tests (ISO 2440:1997) |
ONORM EN ISO 8031 : 2010 | RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - DETERMINATION OF ELECTRICAL RESISTANCE AND CONDUCTIVITY |
UNE-EN 60601-1:2008 | Medical electrical equipment -- Part 1: General requirements for basic safety and essential performance |
I.S. EN ISO 8031:2009 | RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - DETERMINATION OF ELECTRICAL RESISTANCE AND CONDUCTIVITY |
DIN EN 856:2016-09 | RUBER HOSES AND HOSE ASSEMBLIES - RUBBER-COVERED SPIRAL WIRE REINFORCED HYDRAULIC TYPE - SPECIFICATION |
EN ISO 8031:2009 | Rubber and plastics hoses and hose assemblies - Determination of electrical resistance and conductivity (ISO 8031:2009) |
UNI EN ISO 8031 : 2009 | RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - DETERMINATION OF ELECTRICAL RESISTANCE AND CONDUCTIVITY |
EN ISO 8033:2017 | Rubber and plastics hoses - Determination of adhesion between components (ISO 8033:2016) |
ONORM ISO 4649 : 2015 | RUBBER, VULCANIZED OR THERMOPLATIC - DETERMINATION OF ABRASION RESISTANCE USING A ROTATING CYLINDRICAL DRUM DEVICE (ISO 4649:2010) |
UNI EN ISO 14113 : 2013 | GAS WELDING EQUIPMENT - RUBBER AND PLASTICS HOSE AND HOSE ASSEMBLIES FOR USE WITH INDUSTRIAL GASES UP TO 450 BAR (45 MPA) |
UNI EN ISO 20344 : 2012 | PERSONAL PROTECTIVE EQUIPMENT - TEST METHODS FOR FOOTWEAR |
UNI EN 1844 : 2013 | FLEXIBLE SHEETS FOR WATERPROOFING - DETERMINATION OF RESISTANCE TO OZONE - PLASTIC AND RUBBER SHEETS FOR ROOF WATERPROOFING |
EN ISO 6808:2014 | Plastics hoses and hose assemblies for suction and low-pressure discharge of petroleum liquids - Specification (ISO 6808:2014) |
UNI EN ISO 4080 : 2010 | RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - DETERMINATION OF PERMEABILITY TO GAS |
UNI EN ISO 4651 : 2009 | CELLULAR RUBBERS AND PLASTICS - DETERMINATION OF DYNAMIC CUSHIONING PERFORMANCE |
UNI ISO 1431-1 : 2013 | RUBBER, VULCANIZED OR THERMOPLASTIC - RESISTANCE TO OZONE CRACKING - PART 1: STATIC AND DYNAMIC STRAIN TESTING |
UNI EN ISO 2440 : 2014 | FLEXIBLE AND RIGID CELLULAR POLYMERIC MATERIALS - ACCELERATED AGEING TESTS |
UNI EN ISO 6808 : 2014 | PLASTICS HOSES AND HOSE ASSEMBLIES FOR SUCTION AND LOW-PRESSURE DISCHARGE OF PETROLEUM LIQUIDS - SPECIFICATION |
UNI EN ISO 3994 : 2014 | PLASTICS HOSES - HELICAL-THERMOPLASTIC-REINFORCED THERMOPLASTICS HOSES FOR SUCTION AND DISCHARGE OF AQUEOUS MATERIALS - SPECIFICATION |
UNI EN ISO 8030 : 2014 | RUBBER AND PLASTICS HOSES - METHOD OF TEST FOR FLAMMABILITY |
UNI EN ISO 527-1 : 2012 | PLASTICS - DETERMINATION OF TENSILE PROPERTIES - PART 1: GENERAL PRINCIPLES |
UNI EN ISO 2439 : 2009 | FLEXIBLE CELLULAR POLYMERIC MATERIALS - DETERMINATION OF HARDNESS (INDENTATION TECHNIQUE) |
UNI EN ISO 1798 : 2008 | FLEXIBLE CELLULAR POLYMERIC MATERIALS - DETERMINATION OF TENSILE STRENGTH AND ELONGATION AT BREAK |
UNE-ISO 7619-1:2011 | Rubber, vulcanized or thermoplastic -- Determination of indentation hardness -- Part 1: Durometer method (Shore hardness) |
NF EN ISO 178 : 2011 AMD 1 2013 | PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES |
UNI ISO 2393 : 2014 | RUBBER TEST MIXES - PREPARATION, MIXING AND VULCANIZATION - EQUIPMENT AND PROCEDURES |
ISO 1827:2016 | Rubber, vulcanized or thermoplastic — Determination of shear modulus and adhesion to rigid plates — Quadruple-shear methods |
I.S. EN 15807:2011 | RAILWAY APPLICATIONS - PNEUMATIC HALF COUPLINGS |
BS ISO 34-2:2015 | Rubber, vulcanized or thermoplastic. Determination of tear strength Small (Delft) test pieces |
06/30136465 DC : DRAFT MAY 2006 | ISO 815-1 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF COMPRESSION SET - PART 1: AT AMBIENT AND ELEVATED TEMPERATURES |
UNI ISO 3384 : 2009 | RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF STRESS RELAXATION IN COMPRESSION AT AMBIENT AND AT ELEVATED TEMPERATURES |
DIN EN ISO 7326:2015-10 (Draft) | RUBBER AND PLASTICS HOSES - ASSESSMENT OF OZONE RESISTANCE UNDER STATIC CONDITIONS (ISO 7326:2016) |
08/30162045 DC : DRAFT FEB 2008 | BS ISO 4080 - RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - DETERMINATION OF PERMEABILITY TO GAS |
16/30317723 DC : 0 | BS ISO 2930 - RUBBER, RAW NATURAL - DETERMINATION OF PLASTICITY RETENTION INDEX (PRI) |
BS ISO 23794:2015 | Rubber, vulcanized or thermoplastic. Abrasion testing. Guidance |
BS ISO 5794-3:2011 | Rubber compounding ingredients. Silica, precipitated, hydrated Evaluation procedures in a blend of solution styrene-butadiene rubber (S-SBR) and butadiene rubber (BR) |
08/30180441 DC : DRAFT APR 2008 | BS EN ISO 3386-2 AMD1 - FLEXIBLE CELLULAR POLYMERIC MATERIALS - DETERMINATION OF STRESS-STRAIN CHARACTERISTICS IN COMPRESSION - PART 2: HIGH-DENSITY MATERIALS |
PD ISO/TS 16095:2014 | Reclaimed rubber derived from products containing mainly natural rubber. Evaluation procedure |
UNI EN ISO 30013 : 2011 | RUBBER AND PLASTICS HOSES - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - DETERMINATION OF CHANGES IN COLOUR, APPEARANCE AND OTHER PHYSICAL PROPERTIES |
NF ISO 2782-1 : 2016 | RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF PERMEABILITY TO GASES - PART 1: DIFFERENTIAL-PRESSURE METHODS |
UNI ISO 4666-2 : 2009 | RUBBER, VULCANIZED - DETERMINATION OF TEMPERATURE RISE AND RESISTANCE TO FATIGUE IN FLEXOMETER TESTING - PART 2: ROTARY FLEXOMETER |
BS ISO 10619-3:2011 | Rubber and plastics hoses and tubing. Measurement of flexibility and stiffness Bending tests at high and low temperatures |
ISO 1813:2014 | Belt drives — V-ribbed belts, joined V-belts and V-belts including wide section belts and hexagonal belts — Electrical conductivity of antistatic belts: Characteristics and methods of test |
BS ISO 18437-5:2011 | Mechanical vibration and shock. Characterization of the dynamic mechanical properties of visco-elastic materials Poisson ratio based on comparison between measurements and finite element analysis |
13/30276463 DC : 0 | BS ISO 289-1 - RUBBER, UNVULCANIZED - DETERMINATIONS USING A SHEARING-DISC VISCOMETER - PART 1: DETERMINATION OF MOONEY VISCOSITY |
04/30076756 DC : DRAFT MAY 2004 | ISO 6505 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF TENDENCY TO ADHERE TO AND CORRODE METALS |
UNI ISO 2322 : 2014 | STYRENE-BUTADIENE RUBBER (SBR) - EMULSION- AND SOLUTION-POLYMERIZED TYPES - EVALUATION PROCEDURES |
UNI ISO 188 : 2012 | RUBBER, VULCANIZED OR THERMOPLASTIC - ACCELERATED AGEING AND HEAT RESISTANCE TESTS |
ISO 2930:2017 | Rubber, raw natural — Determination of plasticity retention index (PRI) |
BS ISO 27727:2008 | Rubber, vulcanized. Measurement of fatigue crack growth rate |
15/30320884 DC : 0 | BS EN 2899 - AEROSPACE SERIES - VULCANIZED RUBBERS - TEST ON THE SUSCEPTIBILITY TO CORROSION IN A DAMP ATMOSPHERE OF METALS IN CONTACT WITH VULCANIZED RUBBERS |
ISO 10960:2017 | Rubber and plastics hoses — Assessment of ozone resistance under dynamic conditions |
BS ISO 3302-1:2014 | Rubber. Tolerances for products Dimensional tolerances |
ISO 3821:2008 | Gas welding equipment Rubber hoses for welding, cutting and allied processes |
ISO 9924-3:2009 | Rubber and rubber products — Determination of the composition of vulcanizates and uncured compounds by thermogravimetry — Part 3: Hydrocarbon rubbers, halogenated rubbers and polysiloxane rubbers after extraction |
I.S. EN 16523-1:2015 | DETERMINATION OF MATERIAL RESISTANCE TO PERMEATION BY CHEMICALS - PART 1: PERMEATION BY LIQUID CHEMICAL UNDER CONDITIONS OF CONTINUOUS CONTACT |
ISO 7267-2:2008 | Rubber-covered rollers Determination of apparent hardness Part 2: Shore-type durometer method |
09/30196590 DC : 0 | BS ISO 2878 - RUBBER, VULCANIZED - ANTISTATIC AND CONDUCTIVE PRODUCTS - DETERMINATION OF ELECTRICAL RESISTANCE |
BS ISO 11999-6:2016 | PPE for firefighters. Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures Footwear |
NF ISO 3384-1 : 2012 AMD 1 2013 | RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF STRESS RELAXATION IN COMPRESSION - PART 1: TESTING AT CONSTANT TEMPERATURE |
UNI ISO 48 : 2011 | RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF HARDNESS (HARDNESS BETWEEN 10 IRHD AND 100 IRHD) |
BS ISO 4666-3:2016 | Rubber, vulcanized. Determination of temperature rise and resistance to fatigue in flexometer testing Compression flexometer (constant-strain type) |
08/30156909 DC : DRAFT APR 2008 | BS EN 15807 - RAILWAY APPLICATIONS - PNEUMATIC HALF COUPLINGS |
BS ISO 1432:2013 | Rubber, vulcanized or thermoplastic. Determination of low-temperature stiffening (Gehman test) |
12/30257022 DC : 0 | BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS - GENERAL REQUIREMENTS |
BS ISO 12493:2017 | Rubber, vulcanized. Determination of stress in tension upon heating |
DIN EN 16523-1:2015-04 | DETERMINATION OF MATERIAL RESISTANCE TO PERMEATION BY CHEMICALS - PART 1: PERMEATION BY LIQUID CHEMICAL UNDER CONDITIONS OF CONTINUOUS CONTACT |
EN ISO 1402:2009 | Rubber and plastics hoses and hose assemblies - Hydrostatic testing (ISO 1402:2009) |
BS ISO 7267-3:2017 | Rubber-covered rollers. Determination of apparent hardness Pusey and Jones method |
PD ISO/TR 12134:2010 | Rubber. Estimation of uncertainty for test methods. Non-functional parameters |
BS ISO 4659:2014 | Styrene-butadiene rubber (carbon black or carbon black and oil masterbatches). Evaluation procedure |
ISO 12000:2014 | Plastics/rubber — Polymer dispersions and rubber latices (natural and synthetic) — Definitions and review of test methods |
BS ISO 4081:2016 | Rubber hoses and tubing for cooling systems for internal-combustion engines. Specification |
BS ISO 12000:2014 | Plastics/rubber. Polymer dispersions and rubber lattices (natural and synthetic). Definitions and review of test methods |
BS ISO 5794-2:2014 | Rubber compounding ingredients. Silica, precipitated, hydrated Evaluation procedures in styrene-butadiene rubber |
BS ISO 27588:2012 | Rubber, vulcanized or thermoplastic. Determination of dead-load hardness using the very low rubber hardness (VLRH) scale |
BS ISO 34-1:2015 | Rubber, vulcanized or thermoplastic. Determination of tear strength Trouser, angle and crescent test pieces |
BS ISO 7619-2:2004 | Rubber, vulcanized or thermoplastic. Determination of indentation hardness IRHD pocket meter method |
ISO 4647:2010 | Rubber, vulcanized Determination of static adhesion to textile cord H-pull test |
13/30265627 DC : 0 | BS ISO 2393 - RUBBER TEST MIXES - PREPARATION, MIXING AND VULCANIZATION - EQUIPMENT AND PROCEDURES |
13/30265633 DC : 0 | BS ISO 2476 - BUTADIENE RUBBER (BR) - SOLUTION-POLYMERIZED TYPES - EVALUATION PROCEDURES |
BIS IS 3400-6 : 2012 | METHODS OF TEST FOR VULCANIZED RUBBER - PART 6: DETERMINATION OF THE EFFECT OF LIQUIDS |
ISO 188:2011 | Rubber, vulcanized or thermoplastic — Accelerated ageing and heat resistance tests |
BS ISO 132:2011 | Rubber, vulcanized or thermoplastic. Determination of flex cracking and crack growth (De Mattia) |
BS ISO 4649:2017 | Rubber, vulcanized or thermoplastic. Determination of abrasion resistance using a rotating cylindrical drum device |
BS ISO 19013-2:2005 | Rubber hoses and tubing for fuel circuits for internal combustion engines. Specification Gasoline fuels |
17/30334044 DC : 0 | BS ISO 22762-1 - ELASTOMERIC SEISMIC-PROTECTION ISOLATORS - PART 1: TEST METHODS |
BS ISO 9026:2007 | Raw rubber or unvulcanized compounds. Determination of green strength |
BS ISO 812:2017 | Rubber, vulcanized or thermoplastic. Determination of low-temperature brittleness |
13/30278121 DC : 0 | BS ISO 3302-1 - RUBBER - TOLERANCES FOR PRODUCTS - PART 1: DIMENSIONAL TOLERANCES |
07/30161672 DC : 0 | BS ISO 24453 - RUBBER - ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA |
ISO 1432:2013 | Rubber, vulcanized or thermoplastic Determination of low-temperature stiffening (Gehman test) |
17/30335677 DC : 0 | BS EN ISO 178 - PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES |
UNI ISO 4666-1 : 2011 | RUBBER, VULCANIZED - DETERMINATION OF TEMPERATURE RISE AND RESISTANCE TO FATIGUE IN FLEXOMETER TESTING - PART 1: BASIC PRINCIPLES |
04/30110689 DC : DRAFT MARCH 2004 | BS ISO 37 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF TENSIILE STRESS-STRAIN PROPERTIES |
UNI EN ISO 10619-3 : 2012 | RUBBER AND PLASTICS HOSES AND TUBING - MEASUREMENT OF FLEXIBILITY AND STIFFNESS - PART 3: BENDING TESTS AT HIGH AND LOW TEMPERATURES |
14/30295027 DC : 0 | BS ISO 9563 - BELT DRIVES - ELECTRICAL CONDUCTIVITY OF ANTISTATIC ENDLESS SYNCHRONOUS BELTS - CHARACTERISTICS AND TEST METHOD |
07/30161584 DC : 0 | BS ISO 27727 - RUBBER, VULCANIZED - MEASUREMENT OF FATIGUE CRACK GROWTH RATE |
ISO 1795:2017 | Rubber, raw natural and raw synthetic — Sampling and further preparative procedures |
UNI ISO 2921 : 2012 | RUBBER, VULCANIZED - DETERMINATION OF LOW-TEMPERATURE RETRACTION (TR TEST) |
DIN ISO 7743:2016-08 | RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF COMPRESSION STRESS-STRAIN PROPERTIES (ISO 7743:2011) |
UNI ISO 9924-3 : 2010 | RUBBER AND RUBBER PRODUCTS - DETERMINATION OF THE COMPOSITION OF VULCANIZATES AND UNCURED COMPOUNDS BY THERMOGRAVIMETRY - PART 3: HYDROCARBON RUBBERS, HALOGENATED RUBBERS AND POLYSILOXANE RUBBERS AFTER EXTRACTION |
UNI EN 15889 : 2011 | FIRE-FIGHTING HOSES - TEST METHODS |
ISO 2303:2011 | Isoprene rubber (IR) Non-oil-extended, solution-polymerized types Evaluation procedures |
PREN 2899 : 200P1 | AEROSPACE SERIES - VULCANIZED RUBBERS - TEST ON THE SUSCEPTIBILITY TO CORROSION IN A DAMP ATMOSPHERE OF METALS IN CONTACT WITH VULCANIZED RUBBERS |
UNE-ISO 1853:2012 | Conducting and dissipative rubbers, vulcanised or thermoplastic. Measurement of resistivity |
DIN ISO 815-1:2016-09 | Rubber, vulcanized or thermoplastic - Determination of compression set - Part 1: At ambient or elevated temperatures (ISO 815-1:2014) |
ISO 5794-2:2014 | Rubber compounding ingredients — Silica, precipitated, hydrated — Part 2: Evaluation procedures in styrene-butadiene rubber |
ISO 2393:2014 | Rubber test mixes — Preparation, mixing and vulcanization — Equipment and procedures |
UNE-ISO 34-1:2011 | Rubber, vulcanized or thermoplastic -- Determination of tear strength -- Part 1: Trouser, angle and crescent test pieces |
ISO 2781:2008 | Rubber, vulcanized or thermoplastic Determination of density |
ISO 812:2017 | Rubber, vulcanized or thermoplastic — Determination of low-temperature brittleness |
16/30318653 DC : 0 | BS EN 681-1 - ELASTOMERIC SEALS - MATERIAL REQUIREMENTS FOR PIPE JOINT SEALS USED IN WATER AND DRAINAGE APPLICATIONS - PART 1: VULCANIZED RUBBER |
ISO 11999-6:2016 | PPE for firefighters — Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures — Part 6: Footwear |
ISO 4666-1:2010 | Rubber, vulcanized — Determination of temperature rise and resistance to fatigue in flexometer testing — Part 1: Basic principles |
ISO 5772:2015 | Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems Specification |
ISO/TS 16097:2013 | Vulcanized crumb rubber — Evaluation procedures |
I.S. EN ISO 10960:2018 | RUBBER AND PLASTICS HOSES - ASSESSMENT OF OZONE RESISTANCE UNDER DYNAMIC CONDITIONS (ISO 10960:2017) |
ISO 4633:2015 | Rubber seals — Joint rings for water supply, drainage and sewerage pipelines — Specification for materials |
BS EN ISO 8028:2018 | Rubber and/or plastics hoses and hose assemblies for airless paint spraying. Specification |
BS ISO 4666-4:2007 | Rubber, vulcanized. Determination of temperature rise and resistance to fatigue in flexometer testing Constant-stress flexometer |
BS ISO 1853:2011 | Conducting and dissipative rubbers, vulcanized or thermoplastic. Measurement of resistivity |
BS ISO 8789:2009 | Rubber hoses and hose assemblies for liquefied petroleum gas in motor vehicles. Specification |
BS ISO 2782-2:2012 | Rubber, vulcanized or thermoplastic. Determination of permeability to gases Equal-pressure method |
EN ISO 10960:2018 | Rubber and plastics hoses - Assessment of ozone resistance under dynamic conditions (ISO 10960:2017) |
17/30359551 DC : 0 | BS EN 13832-1 - FOOTWEAR PROTECTING AGAINST CHEMICALS - PART 1: TERMINOLOGY AND TEST METHODS |
DIN EN 13611:2016-09 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
BS EN ISO 10960:2018 | Rubber and plastics hoses. Assessment of ozone resistance under dynamic conditions |
BIS IS 12657 : 2014 | RUBBER AND PLASTICS HOSES - SUB-AMBIENT TEMPERATURE FLEXIBILITY TESTS |
ISO 18437-3:2005 | Mechanical vibration and shock — Characterization of the dynamic mechanical properties of visco-elastic materials — Part 3: Cantilever shear beam method |
ISO 7619-2:2010 | Rubber, vulcanized or thermoplastic Determination of indentation hardness Part 2: IRHD pocket meter method |
PREN 13611 : DRAFT 2017 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
ISO 2321:2017 | Rubber threads — Methods of test |
ISO 132:2017 | Rubber, vulcanized or thermoplastic Determination of flex cracking and crack growth (De Mattia) |
ISO 19013-2:2016 | Rubber hoses and tubing for fuel circuits for internal combustion engines Specification Part 2: Gasoline fuels |
ISO 48:2010 | Rubber, vulcanized or thermoplastic Determination of hardness (hardness between 10 IRHD and 100 IRHD) |
ISO 7619-1:2010 | Rubber, vulcanized or thermoplastic Determination of indentation hardness Part 1: Durometer method (Shore hardness) |
I.S. EN ISO 2440:2000 | FLEXIBLE AND RIGID CELLULAR POLYMERIC MATERIALS - ACCELERATED AGEING TESTS |
ISO 20873:2018 | Footwear — Test methods for outsoles — Dimensional stability |
ISO/TR 12134:2010 | Rubber — Estimation of uncertainty for test methods — Non-functional parameters |
ISO 2782-1:2016 | Rubber, vulcanized or thermoplastic Determination of permeability to gases Part 1: Differential-pressure methods |
ISO 18573:2012 | Conveyor belts — Test atmospheres and conditioning periods |
ISO 4649:2017 | Rubber, vulcanized or thermoplastic — Determination of abrasion resistance using a rotating cylindrical drum device |
BS EN ISO 2440 : 2000 | FLEXIBLE AND RIGID CELLULAR POLYMERIC MATERIALS - ACCELERATED AGEING TESTS |
ISO/TR 16098:2012 | Reclaimed rubbers and reclaimed crumb rubbers Evaluation of dispersion in rubber mixes |
DIN EN 13831:2007-12 | Closed expansion vessels with built in diaphragm for installation in water |
DIN EN ISO 2439:2009-05 | FLEXIBLE CELLULAR POLYMERIC MATERIALS - DETERMINATION OF HARDNESS (INDENTATION TECHNIQUE) |
DIN EN ISO 2440:2015-02 | FLEXIBLE AND RIGID CELLULAR POLYMERIC MATERIALS - ACCELERATED AGEING TESTS (ISO 2440:1997 + AMD.1:2010 + AMD.2:2014) |
BS EN ISO 1402:2009 | Rubber and plastics hoses and hose assemblies. Hydrostatic testing |
BS EN 60601-1 : 2006 | MEDICAL ELECTRICAL EQUIPMENT PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE |
UNE-EN ISO 7233:2017 | Rubber and plastics hoses and hose assemblies - Determination of resistance to vacuum (ISO 7233:2016) |
ISO 2439:2008 | Flexible cellular polymeric materials Determination of hardness (indentation technique) |
IEC 60601-1:2005+AMD1:2012 CSV | Medical electrical equipment - Part 1: General requirements for basic safety and essential performance |
ISO 8033:2016 | Rubber and plastics hoses Determination of adhesion between components |
BS EN ISO 5999:2013 | Flexible cellular polymeric materials. Polyurethane foam for load-bearing applications excluding carpet underlay. Specification |
DIN EN ISO 20344:2013-02 | Personal protective equipment - Test methods for footwear (ISO 20344:2011) |
UNE-EN ISO 1401:2017 | Rubber hoses for agricultural spraying (ISO 1401:2016) |
UNE-EN ISO 10619-1:2012 | Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 1: Bending tests at ambient temperature (ISO 10619-1:2011) |
UNE-EN ISO 6179:2018 | Rubber, vulcanized or thermoplastic - Rubber sheets and rubber-coated fabrics - Determination of transmission rate of volatile liquids (gravimetric technique) (ISO 6179:2017) |
UNE-EN ISO 3821:2011 | Gas welding equipment - Rubber hoses for welding, cutting and allied processes (ISO 3821:2008) |
BS EN ISO 4080:2009 | Rubber and plastics hoses and hose assemblies. Determination of permeability to gas |
BS EN ISO 2439:2008 | Flexible cellular polymeric materials. Determination of hardness (indentation technique) |
BS EN 455-2:2015 | Medical gloves for single use Requirements and testing for physical properties |
UNE-EN 857:2015 | Rubber hoses and hose assemblies - Wire braid reinforced compact type for hydraulic applications - Specification |
UNE-EN ISO 10619-2:2012 | Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 2: Bending tests at sub-ambient temperatures (ISO 10619-2:2011) |
BS EN ISO 6179:2017 | Rubber, vulcanized or thermoplastic. Rubber sheets and rubber-coated fabrics. Determination of transmission rate of volatile liquids (gravimetric technique) |
UNE-EN ISO 14113:2013 | Gas welding equipment - Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa) (ISO 14113:2013) |
ISO 14113:2013 | Gas welding equipment — Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa) |
ISO 2440:1997 | Flexible and rigid cellular polymeric materials Accelerated ageing tests |
ISO 8031:2009 | Rubber and plastics hoses and hose assemblies Determination of electrical resistance and conductivity |
ISO 7233:2016 | Rubber and plastics hoses and hose assemblies Determination of resistance to vacuum |
ISO 3994:2014 | Plastics hoses — Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials — Specification |
ISO 3384:2005 | Rubber, vulcanized or thermoplastic Determination of stress relaxation in compression at ambient and at elevated temperatures |
BS EN ISO 8308:2015 | Rubber and plastics hoses and tubing. Determination of transmission of liquids through hose and tubing walls |
UNE-EN 1844:2013 | Flexible sheets for waterproofing - Determination of resistance to ozone - Plastic and rubber sheets for roof waterproofing |
ISO 6808:2014 | Plastics hoses and hose assemblies for suction and low-pressure discharge of petroleum liquids — Specification |
ISO 4080:2009 | Rubber and plastics hoses and hose assemblies — Determination of permeability to gas |
I.S. EN 455-2:2015 | MEDICAL GLOVES FOR SINGLE USE - PART 2: REQUIREMENTS AND TESTING FOR PHYSICAL PROPERTIES |
ISO 6179:2017 | Rubber, vulcanized or thermoplastic Rubber sheets and rubber-coated fabrics Determination of transmission rate of volatile liquids (gravimetric technique) |
UNE-ISO 4649:2013 | Rubber, vulcanized or thermoplastic — Determination of abrasion resistance using a rotating cylindrical drum device |
ISO 8308:2015 | Rubber and plastics hoses and tubing Determination of transmission of liquids through hose and tubing walls |
BS EN ISO 3994:2014 | Plastics hoses. Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials. Specification |
UNE-EN 455-2:2015 | Medical gloves for single use - Part 2: Requirements and testing for physical properties |
BS EN 13831:2007 | Closed expansion vessels with built-in diaphragm for installation in water |
ISO 1402:2009 | Rubber and plastics hoses and hose assemblies Hydrostatic testing |
UNE-EN ISO 8031:2010 | Rubber and plastics hoses and hose assemblies - Determination of electrical resistance and conductivity (ISO 8031:2009) |
ISO 5999:2013 | Flexible cellular polymeric materials — Polyurethane foam for load-bearing applications excluding carpet underlay — Specification |
ISO 4651:1988 | Cellular rubbers and plastics — Determination of dynamic cushioning performance |
ONORM EN ISO 2440 : 2015 | FLEXIBLE AND RIGID CELLULAR POLYMERIC MATERIALS - ACCELERATED AGEING TESTS (ISO 2440:1997 + AMD 1:2010 + AMD 2:2014) |
BS EN ISO 1401:2016 | Rubber hoses for agricultural spraying |
UNE-ISO 7743:2016 | Rubber, vulcanized or thermoplastic. Determination of compression stress-strain properties |
UNE-EN ISO 8308:2017 | Rubber and plastics hoses and tubing - Determination of transmission of liquids through hose and tubing walls (ISO 8308:2015) |
UNE-ISO 2781:2015 | Rubber, vulcanized or thermoplastic. Determination of density |
BS EN ISO 4651 : 1995 | CELLULAR RUBBERS AND PLASTICS - DETERMINATION OF DYNAMIC CUSHIONING PERFORMANCE |
EN 14879-5:2007 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 5: Linings on concrete components |
EN 853:2015 | Rubber hoses and hose assemblies - Wire braid reinforced hydraulic type - Specification |
EN ISO 3821:2010 | Gas welding equipment - Rubber hoses for welding, cutting and allied processes (ISO 3821:2008) |
EN ISO 8030:2014 | Rubber and plastics hoses - Method of test for flammability (ISO 8030:2014) |
EN ISO 2439:2008 | Flexible cellular polymeric materials - Determination of hardness (indentation technique) (ISO 2439:2008) |
EN ISO 8029:2014 | Plastics hose - General-purpose collapsible water hose, textile-reinforced - Specification (ISO 8029:2014) |
EN ISO 10619-3:2011 | Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 3: Bending tests at high and low temperatures (ISO 10619-3:2011) |
EN 455-2:2015 | Medical gloves for single use - Part 2: Requirements and testing for physical properties |
EN 854:2015 | Rubber hoses and hose assemblies - Textile reinforced hydraulic type - Specification |
EN ISO 30013:2011 | Rubber and plastics hoses - Methods of exposure to laboratory light sources - Determination of changes in colour, appearance and other physical properties (ISO 30013:2011) |
EN ISO 6179:2017 | Rubber, vulcanized or thermoplastic - Rubber sheets and rubber-coated fabrics - Determination of transmission rate of volatile liquids (gravimetric technique) (ISO 6179:2017) |
EN ISO 8308:2015 | Rubber and plastics hoses and tubing - Determination of transmission of liquids through hose and tubing walls (ISO 8308:2015) |
EN 15889:2011 | Fire-fighting hoses - Test methods |
EN ISO 16012:2015 | Plastics - Determination of linear dimensions of test specimens (ISO 16012:2015) |
EN 857:2015 | Rubber hoses and hose assemblies - Wire braid reinforced compact type for hydraulic applications - Specification |
EN ISO 3994:2014 | PLASTICS HOSES - HELICAL-THERMOPLASTIC-REINFORCED THERMOPLASTICS HOSES FOR SUCTION AND DISCHARGE OF AQUEOUS MATERIALS - SPECIFICATION (ISO 3994:2014) |
EN ISO 1401:2016 | Rubber hoses for agricultural spraying (ISO 1401:2016) |
EN ISO 527-1:2012 | Plastics - Determination of tensile properties - Part 1: General principles (ISO 527-1:2012) |
EN 856:2015 | Rubber hoses and hose assemblies - Rubber-covered spiral wire reinforced hydraulic type - Specification |
EN ISO 7326:2016 | Rubber and plastics hoses - Assessment of ozone resistance under static conditions (ISO 7326:2016) |
EN 13831:2007 | Closed expansion vessels with built in diaphragm for installation in water |
EN ISO 1798:2008 | Flexible cellular polymeric materials - Determination of tensile strength and elongation at break (ISO 1798:2008) |
EN ISO 14113:2013 | Gas welding equipment - Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa) (ISO 14113:2013) |
EN ISO 4080:2009 | Rubber and plastics hoses and hose assemblies - Determination of permeability to gas (ISO 4080:2009) |
EN ISO 5999:2013 | Flexible cellular polymeric materials - Polyurethane foam for load-bearing applications excluding carpet underlay - Specification (ISO 5999:2013) |
EN 1844:2013 | Flexible sheets for waterproofing - Determination of resistance to ozone - Plastic and rubber sheets for roof waterproofing |
BIS IS 3660-7 : 2013 | METHODS OF TEST FOR NATURAL RUBBER - PART 7: DETERMINATION OF MOONEY VISCOSITY |
BS ISO 18573:2012 | Conveyor belts. Test atmospheres and conditioning periods |
BS ISO 1827:2016 | Rubber, vulcanized or thermoplastic. Determination of shear modulus and adhesion to rigid plates. Quadruple-shear methods |
BS ISO 17278:2013 | Rubber, raw natural. Determination of the gel content of technically specified rubber (TSR) |
BS ISO 4658:1999 | Acrylonitrile-butadiene rubber (NBR). Evaluation procedure |
ISO 2285:2013 | Rubber, vulcanized or thermoplastic Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensile load |
BS EN ISO 178 : 2010 | PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES |
BS ISO 10282:2014 | Single-use sterile rubber surgical gloves. Specification |
BS ISO 4664-2:2006 | Rubber, vulcanized or thermoplastic. Determination of dynamic properties Torsion pendulum methods at low frequencies |
BS ISO 48:2010 | Rubber, vulcanized or thermoplastic. Determination of hardness (hardness between 10 IRHD and 100 IRHD) |
16/30335302 DC : 0 | BS ISO 1827 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF SHEAR MODULUS AND ADHESION TO RIGID PLATES - QUADRUPLE-SHEAR METHODS |
17/30334047 DC : 0 | BS ISO 22762-2 - ELASTOMERIC SEISMIC-PROTECTION ISOLATORS - PART 2: APPLICATIONS FOR BRIDGES - SPECIFICATIONS |
UNI ISO 2475 : 2012 | CHLOROPRENE RUBBER (CR) - GENERAL-PURPOSE TYPES - EVALUATION PROCEDURE |
ISO 6916-1:1995 | Flexible cellular polymeric materials — Sponge and expanded cellular rubber products — Specification — Part 1: Sheeting |
BS EN ISO 7326:2016 | Rubber and plastics hoses. Assessment of ozone resistance under static conditions |
14/30288439 DC : 0 | BS ISO 1817 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF THE EFFECT OF LIQUIDS |
06/30113809 DC : DRAFT APR 2006 | ISO 4666-4 - RUBBER, VULCANIZED - DETERMINATION OF TEMPERATURE RAISE AND RESISTANCE TO FATIGUE IN FLEXOMETER TESTING - PART 4: CONSTANT STRESS FLEXOMETER |
08/30166722 DC : DRAFT MAR 2008 | BS ISO 4662 - RUBBER - DETERMINATION OF REBOUND RESILIENCE OF VULCANIZATES |
PD ISO/TR 16098:2012 | Reclaimed rubbers and reclaimed crumb rubbers. Evaluation of dispersion in rubber mixes |
BS ISO 2393:2014 | Rubber test mixes. Preparation, mixing and vulcanization. Equipment and procedures |
UNE-ISO 4662:2013 | Rubber, vulcanized or thermoplastic — Determination of rebound resilience |
11/30212443 DC : 0 | BS ISO 2782-1 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF PERMEABILITY TO GASES - PART 1: DIFFERENTIAL-PRESSURE METHODS |
15/30317642 DC : 0 | BS EN ISO 8028 - RUBBER AND/OR PLASTICS HOSES AND HOSE ASSEMBLIES FOR AIRLESS PAINT SPRAYING - SPECIFICATION |
BS ISO 18437-1:2012 | Mechanical vibration and shock. Characterization of the dynamic mechanical properties of visco-elastic materials Principles and guidelines |
12/30261822 DC : 0 | BS ISO 6914 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF AGEING CHARACTERISTICS BY MEASUREMENT OF STRESS RELAXATION IN TENSION |
BS ISO 22762-1:2005 | Elastomeric seismic-protection isolators Test methods |
08/30176627 DC : DRAFT JAN 2008 | BS ISO 2476 - RUBBER, BUTADIENE (BR) - SOLUTION-POLYMERIZED TYPES - EVALUATION PROCEDURES |
14/30295538 DC : 0 | BS ISO 2302 - ISOBUTENE-ISOPRENE RUBBER (IIR) - EVALUATION PROCEDURES |
UNE-EN ISO 8029:2014 | Plastics hose - General-purpose collapsible water hose, textile-reinforced - Specification (ISO 8029:2014) |
BS ISO 4666-1:2010 | Rubber, vulcanized. Determination of temperature rise and resistance to fatigue in flexometer testing Basic principles |
BS EN ISO 16012:2015 | Plastics. Determination of linear dimensions of test specimens |
DIN ISO 3384-1:2015-12 | Rubber, vulcanized or thermoplastic - Determination of stress relaxation in compression - Part 1: Testing at constant temperature (ISO 3384-1:2011 + Amd.1:2013) |
15/30317636 DC : 0 | BS EN ISO 1401 - RUBBER HOSES FOR AGRICULTURAL SPRAYING |
DIN EN ISO 10619-3:2012-03 | Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 3: Bending tests at high and low temperatures (ISO 10619-3:2011) |
15/30317681 DC : 0 | BS EN ISO 7326 - RUBBER AND PLASTICS HOSES - ASSESSMENT OF OZONE RESISTANCE UNDER STATIC CONDITIONS |
15/30317648 DC : 0 | BS ISO 8789 - RUBBER HOSES AND HOSE ASSEMBLIES FOR LIQUEFIED PETROLEUM GAS IN MOTOR VEHICLES - SPECIFICATION |
14/30314166 DC : 0 | BS EN 6109 - AEROSPACE SERIES - STATIC SEAL ELEMENTS ELASTOMER, MOULDED, PHOSPHATE ESTER RESISTANT - TECHNICAL SPECIFICATION |
BS ISO 188:2011 | Rubber, vulcanized or thermoplastic. Accelerated ageing and heat resistance tests |
BS ISO 11752:2000 | Flexible cellular polymeric materials. Moulded and extruded sponge or expanded cellular rubber products. Compressibility test on finished parts |
06/30146275 DC : DRAFT FEB 2006 | ISO 24415-1 - TIPS FOR WALKING AIDS - REQUIREMENTS AND TEST METHODS - PART 1: FRICTION OF TIPS |
08/30178592 DC : DRAFT FEB 2008 | BS ISO 6804 - RUBBER AND PLASTICS INLET HOSES AND HOSE ASSEMBLIES FOR WASHING-MACHINES AND DISHWASHERS - SPECIFICATION |
BS ISO 6123-2:2015 | Rubber or plastics covered rollers. Specifications Surface characteristics |
09/30184526 DC : DRAFT MAY 2009 | BS ISO 4666-3 - RUBBER, VULCANIZED - DETERMINATION OF TEMPERATURE RISE AND RESISTANCE TO FATIQUE IN FLEXOMETER TESTING - PART 3: COMPRESSION FLEXOMETER (CONSTANT-STRAIN TYPE) |
10/30201343 DC : 0 | BS ISO 5794-3 - RUBBER COMPOUNDING INGREDIENTS - SILICA, PRECIPITATED, HYDRATED - PART 3: EVALUATION PROCEDURES IN A MIXED SOLUTION OF STYRENE-BUTADIENE RUBBER AND BUTADIENE RUBBER |
BS ISO 2528:2017 | Sheet materials. Determination of water vapour transmission rate (WVTR). Gravimetric (dish) method |
ISO 5600:2017 | Rubber — Determination of adhesion to rigid materials using conical shaped parts |
BS ISO 3384:2005 | Rubber, vulcanized or thermoplastic. Determination of stress relaxationi n compression at ambient and at elevated temperatures |
09/30193391 DC : DRAFT MAY 2009 | BS ISO 7619-1 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF INDENTATION HARDNESS - PART 1: DUROMETER METHOD (SHORE HARDNESS) |
BS EN 16523-1 : 2015 | DETERMINATION OF MATERIAL RESISTANCE TO PERMEATION BY CHEMICALS - PART 1: PERMEATION BY LIQUID CHEMICAL UNDER CONDITIONS OF CONTINUOUS CONTACT |
BS ISO 36:2017 | Rubber, vulcanized or thermoplastic. Determination of adhesion to textile fabrics |
PREN 1844 : DRAFT 2012 | FLEXIBLE SHEETS FOR WATERPROOFING - DETERMINATION OF RESISTANCE TO OZONE - PLASTIC AND RUBBER SHEETS FOR ROOF WATERPROOFING |
ISO 7743:2017 | Rubber, vulcanized or thermoplastic Determination of compression stress-strain properties |
ISO 17052:2007 | Rubber, raw Determination of residual monomers and other volatile low-molecular-mass compounds by capillary gas chromatography Thermal desorption (dynamic headspace) method |
UNI EN ISO 1402 : 2009 | RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - HYDROSTATIC TESTING |
ISO/TS 16096:2014 | Reclaimed isobutene-isoprene (IIR) rubber Evaluation procedure |
ISO 4635:2011 | Rubber, vulcanized Preformed joint seals for use between concrete paving sections of highways Specification |
BIS IS 3400-2 : 2014 | METHODS OF TEST FOR VULCANIZED RUBBER - PART 2: RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF HARDNESS (HARDNESS BETWEEN 10 IRHD AND 100 IRHD) |
PREN 6109 : 200P2 | AEROSPACE SERIES - STATIC SEAL ELEMENTS ELASTOMER, MOULDED, PHOSPHATE ESTER RESISTANT - TECHNICAL SPECIFICATION |
I.S. EN 13832-1:2006 | FOOTWEAR PROTECTING AGAINST CHEMICALS - PART 1: TERMINOLOGY AND TEST METHODS |
ISO 1658:2015 | Natural rubber (NR) Evaluation procedure |
ISO 20057:2017 | Rubber household gloves — General requirements and test methods |
UNI ISO 6914 : 2014 | RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF AGEING CHARACTERISTICS BY MEASUREMENT OF STRESS RELAXATION IN TENSION |
BS EN ISO 3821:2010 | Gas welding equipment. Rubber hoses for welding, cutting and allied processes |
I.S. EN IEC 61730-2:2018 | PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 2: REQUIREMENTS FOR TESTING |
ISO 2528:2017 | Sheet materials — Determination of water vapour transmission rate (WVTR) — Gravimetric (dish) method |
ISO 17278:2013 | Rubber, raw natural Determination of the gel content of technically specified rubber (TSR) |
I.S. EN ISO 8028:2018 | RUBBER AND/OR PLASTICS HOSES AND HOSE ASSEMBLIES FOR AIRLESS PAINT SPRAYING - SPECIFICATION (ISO 8028:2017) |
ISO 2782:2006 | Rubber, vulcanized or thermoplastic Determination of permeability to gases |
ISO 5794-3:2011 | Rubber compounding ingredients Silica, precipitated, hydrated Part 3: Evaluation procedures in a blend of solution styrene-butadiene rubber (S-SBR) and butadiene rubber (BR) |
ISO 6123-2:2015 | Rubber or plastics covered rollers — Specifications — Part 2: Surface characteristics |
BIS IS 14794 : 2013 | ISOBUTENE-ISOPRENE RUBBER (IIR) - EVALUATION PROCEDURES |
UNE-ISO 815-1:2011 | Rubber, vulcanized or thermoplastic -- Determination of compression set -- Part 1: At ambient or elevated temperatures |
UNI EN ISO 10619-1 : 2012 | RUBBER AND PLASTICS HOSES AND TUBING - MEASUREMENT OF FLEXIBILITY AND STIFFNESS - PART 1: BENDING TESTS AT AMBIENT TEMPERATURE |
ISO 23337:2016 | Rubber, vulcanized or thermoplastic — Determination of abrasion resistance using the Improved Lambourn test machine |
UNI ISO 3387 : 2013 | RUBBER - DETERMINATION OF CRYSTALLIZATION EFFECTS BY HARDNESS MEASUREMENTS |
ISO 11193-2:2006 | Single-use medical examination gloves — Part 2: Specification for gloves made from poly(vinyl chloride) |
UNI EN ISO 8307 : 2008 | FLEXIBLE CELLULAR POLYMERIC MATERIALS - DETERMINATION OF RESILIENCE BY BALL REBOUND |
ISO 2475:2011 | Chloroprene rubber (CR) — General-purpose types — Evaluation procedure |
ISO 4666-2:2008 | Rubber, vulcanized Determination of temperature rise and resistance to fatigue in flexometer testing Part 2: Rotary flexometer |
ISO 4666-4:2007 | Rubber, vulcanized Determination of temperature rise and resistance to fatigue in flexometer testing Part 4: Constant-stress flexometer |
UNI ISO 1853 : 2012 | CONDUCTING AND DISSIPATIVE RUBBERS, VULCANIZED OR THERMOPLASTIC - MEASUREMENT OF RESISTIVITY |
ISO 18437-4:2008 | Mechanical vibration and shock — Characterization of the dynamic mechanical properties of visco-elastic materials — Part 4: Dynamic stiffness method |
DIN EN ISO 8307:2008-03 | FLEXIBLE CELLULAR POLYMERIC MATERIALS - DETERMINATION OF RESILIENCE BY BALL REBOUND |
ISO 3387:2012 | Rubber Determination of crystallization effects by hardness measurements |
NF ISO 7619-2 : 2010 | RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF INDENTATION HARDNESS - PART 2: IRHD POCKET METER METHOD |
BS ISO 14309:2011 | Rubber, vulcanized or thermoplastic. Determination of volume and/or surface resistivity |
UNE-EN 13611:2016 | Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements |
NF ISO 2930 : 2017 | RUBBER, RAW NATURAL - DETERMINATION OF PLASTICITY RETENTION INDEX (PRI) |
BS EN 13832-1:2006 | Footwear protecting against chemicals Terminology and test methods |
ONORM EN ISO 178 : 2013 | PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES (ISO 178:2010 + AMD 1:2013) |
ISO 14309:2011 | Rubber, vulcanized or thermoplastic Determination of volume and/or surface resistivity |
ISO 18437-1:2012 | Mechanical vibration and shock — Characterization of the dynamic mechanical properties of visco-elastic materials — Part 1: Principles and guidelines |
I.S. EN ISO 8307:2007 | FLEXIBLE CELLULAR POLYMERIC MATERIALS - DETERMINATION OF RESILIENCE BY BALL REBOUND |
ISO 30013:2011 | Rubber and plastics hoses Methods of exposure to laboratory light sources Determination of changes in colour, appearance and other physical properties |
BS EN ISO 1798:2008 | Flexible cellular polymeric materials. Determination of tensile strength and elongation at break |
ISO 20344:2011 | Personal protective equipment Test methods for footwear |
UNE-EN ISO 1402:2010 | Rubber and plastics hoses and hose assemblies - Hydrostatic testing (ISO 1402:2009) |
BS EN 854:2015 | Rubber hoses and hose assemblies. Textile reinforced hydraulic type. Specification |
ISO 8030:2014 | Rubber and plastics hoses — Method of test for flammability |
BS EN ISO 14113:2013 | Gas welding equipment. Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa) |
BS EN ISO 6808:2014 | Plastics hoses and hose assemblies for suction and low-pressure discharge of petroleum liquids. Specification |
BS EN ISO 527-1:2012 | Plastics. Determination of tensile properties General principles |
ISO 8029:2014 | Plastics hose — General-purpose collapsible water hose, textile-reinforced — Specification |
DIN EN ISO 527-1:2012-06 | PLASTICS - DETERMINATION OF TENSILE PROPERTIES - PART 1: GENERAL PRINCIPLES (ISO 527-1:2012) |
I.S. EN 13611:2015/AC:2016 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
DIN EN ISO 1798:2008-04 | Flexible cellular polymeric materials - Determination of tensile strength and elongation at break (ISO 1798:2008) |
DIN EN 857:2016-09 | RUBBER HOSES AND HOSE ASSEMBLIES - WIRE BRAID REINFORCED COMPACT TYPE FOR HYDRAULIC APPLICATIONS - SPECIFICATION |
DIN EN 854:2016-09 | RUBBER HOSES AND HOSE ASSEMBLIES - TEXTILE REINFORCED HYDRAULIC TYPE - SPECIFICATION |
DIN ISO 3384:2008-07 | RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF STRESS RELAXATION IN COMPRESSION AT AMBIENT AND AT ELEVATED TEMPERATURES |
DIN EN 14879-5:2007-10 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 5: Linings on concrete components |
DIN EN ISO 5999:2013-12 | FLEXIBLE CELLULAR POLYMERIC MATERIALS - POLYURETHANE FOAM FOR LOAD-BEARING APPLICATIONS EXCLUDING CARPET UNDERLAY - SPECIFICATION (ISO 5999:2013) |
IEC 61730-2:2016 RLV | Photovoltaic (PV) module safety qualification - Part 2: Requirements for testing |
ONORM EN ISO 4080 : 2010 | RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - DETERMINATION OF PERMEABILITY TO GAS |
AS/NZS 1335:2020 | Gas welding equipment - Rubber hoses for welding, cutting and allied processes |
ISO 525:2013 | Bonded abrasive products General requirements |
ISO 1795:2017 | Rubber, raw natural and raw synthetic — Sampling and further preparative procedures |
ISO 1382:2012 | Rubber Vocabulary |
ISO 13385-1:2011 | Geometrical product specifications (GPS) Dimensional measuring equipment Part 1: Callipers; Design and metrological characteristics |
ISO 3302-1:2014 | Rubber — Tolerances for products — Part 1: Dimensional tolerances |
ISO 2393:2014 | Rubber test mixes — Preparation, mixing and vulcanization — Equipment and procedures |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.