Skip to content
Please enter a keyword to search

  • ISO 2553:2013

    View superseded by
    Withdrawn A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
    View superseded by

    Welding and allied processes Symbolic representation on drawings Welded joints

    Available format(s):  Hardcopy, PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

    Withdrawn date:  20-03-2019

    Language(s):  French, English

    Published date:  13-12-2013

    Publisher:  International Organization for Standardization

    Add To Cart

    Abstract - (Show below) - (Hide below)

    ISO 2553:2013 defines the rules to be applied for symbolic representation of welded joints on technical drawings. This may include information about the geometry, manufacture, quality and testing of the welds. The principles of this standard may also be applied to soldered and brazed joints.

    It is recognized that there are two different approaches in the global market to designate the arrow side and other side on drawings. In ISO 2553:2013: sections, tables and figures which carry the suffix letter "A" are applicable only to the symbolic representation system based on a dual reference line; sections, tables and figures which carry the suffix letter "B" are applicable only to the symbolic representation system based on a single reference line; sections, tables and figures which do not have the suffix letter "A" or "B" are applicable to both systems.

    The symbols shown may be combined with other symbols used on technical drawings, for example to show surface finish requirements.

    An alternative designation method is presented which may be used to represent welded joints on drawings by specifying essential design information such as weld dimensions, quality level, etc. The joint preparation and welding process(es) are then determined by the production unit in order to meet the specified requirements.

    General Product Information - (Show below) - (Hide below)

    Development Note DRAFT ISO/DIS 2553 is also available for this standard. (01/2017)
    Document Type Standard
    Publisher International Organization for Standardization
    Status Withdrawn
    Superseded By
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    I.S. EN ISO 17659:2004 WELDING - MULTILINGUAL TERMS FOR WELDED JOINTS WITH ILLUSTRATIONS
    DIN ISO 11745 E : 2016 BRAZING FOR AEROSPACE APPLICATIONS - QUALIFICATION TEST FOR BRAZERS AND BRAZING OPERATORS - BRAZING OF METALLIC COMPONENTS (ISO 11745:2010 + AMD.1:2015)
    I.S. EN 29692:1994 METAL-ARC WELDING WITH COVERED ELECTRODE, GAS-SHIELDED METAL-ARC WELDING AND GAS WELDING - JOINT PREPARATIONS FOR STEEL
    I.S. EN 287-1:2011 QUALIFICATION TEST OF WELDERS - FUSION WELDING - PART 1: STEELS
    13/30259076 DC : 0 BS EN 13445-8 - UNFIRED PRESSURE VESSELS - PART 8: ADDITIONAL REQUIREMENTS FOR PRESSURE VESSELS OF ALUMINIUM AND ALUMINIUM ALLOYS
    UNI EN 1090-3 : 2008 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES
    ISO 24394:2008 Welding for aerospace applications Qualification test for welders and welding operators Fusion welding of metallic components
    DIN ISO 11745:2016-09 BRAZING FOR AEROSPACE APPLICATIONS - QUALIFICATION TEST FOR BRAZERS AND BRAZING OPERATORS - BRAZING OF METALLIC COMPONENTS (ISO 11745:2010 + AMD.1:2015)
    DIN EN ISO 16089 E : 2016 MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES (ISO 16089:2015)
    16/30338096 DC : 0 BS EN 303-1 - HEATING BOILERS - PART 1: HEATING BOILERS WITH FORCED DRAUGHT BURNERS - TERMINOLOGY, GENERAL REQUIREMENTS, TESTING AND MARKING
    ISO 10042:2005 Welding Arc-welded joints in aluminium and its alloys Quality levels for imperfections
    17/30344511 DC : 0 BS EN ISO 10042 - WELDING - ARC-WELDED JOINTS IN ALUMINIUM AND ITS ALLOYS - QUALITY LEVELS FOR IMPERFECTIONS
    PREN 14276-2 : DRAFT 2017 PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 2: PIPING - GENERAL REQUIREMENTS
    EN ISO 12215-6:2008 Small craft - Hull construction and scantlings - Part 6: Structural arrangements and details (ISO 12215-6:2008)
    PREN 303-1 : DRAFT 2016 HEATING BOILERS - PART 1: HEATING BOILERS WITH FORCED DRAUGHT BURNERS - TERMINOLOGY, GENERAL REQUIREMENTS, TESTING AND MARKING
    AWS C4.6M : 2006 THERMAL CUTTING - CLASSIFICATION OF THERMAL CUTS - GEOMETRIC PRODUCT SPECIFICATION AND QUALITY TOLERANCES
    BS ISO 11745 : 2010 BRAZING FOR AEROSPACE APPLICATIONS - QUALIFICATION TEST FOR BRAZERS AND BRAZING OPERATORS - BRAZING OF METALLIC COMPONENTS
    I.S. EN 15420:2010 GAS-FIRED CENTRAL HEATING BOILERS - TYPE C BOILERS OF NOMINAL HEAT INPUT EXCEEDING 70 KW, BUT NOT EXCEEDING 1000 KW
    BS EN 13001-3-1 : 2012 CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF COMPETENCE OF STEEL STRUCTURE
    UNI EN 13001-3-1 : 2013 CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF COMPETENCE OF STEEL STRUCTURE
    UNE-EN 13445-8:2015 Unfired pressure vessels - Part 8: Additional requirements for pressure vessels of aluminium and aluminium alloys
    DIN EN 1090-3:2008-09 EXECUTION OF STEEL AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL RULES FOR EXECUTION OF ALUMINIUM STRUCTURES
    ISO/TR 17671-1:2002 Welding Recommendations for welding of metallic materials Part 1: General guidance for arc welding
    I.S. EN 448:2015 DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - FITTING ASSEMBLIES OF STEEL SERVICE PIPES, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE
    DIN EN 1011-5:2003-10 WELDING - RECOMMENDATIONS FOR WELDING OF METALLIC MATERIALS - PART 5: WELDING OF CLAD STEEL
    DIN EN ISO 9692-3:2001-07 WELDING AND ALLIED PROCESSES - TYPES OF JOINT PREPARATION - PART 3: METAL INERT GAS WELDING AND TUNGSTEN INERT GAS WELDING OF ALUMINIUM AND ITS ALLOYS (ISO 9692-3:2016)
    BS EN 297:1994 Gas-fired central heating boilers. Type B11 and B11BS boilers fitted with atmospheric burners of nominal heat input not exceeding 70 kW
    BS EN ISO 9692-1:2013 Welding and allied processes. Types of joint preparation Manual metal arc welding, gas-shielded metal arc welding, gas welding, TIG welding and beam welding of steels
    BS EN 25817:1992 ARC WELDED JOINTS IN STEEL - GUIDANCE ON QUALITY LEVELS FOR IMPERFECTIONS
    BS EN 303-5:2012 Heating boilers Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW. Terminology, requirements, testing and marking
    I.S. EN 14276-1:2006 PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS
    BS EN 29692:1994 SPECIFICATION FOR METAL ARC WELDING WITH COVERED ELECTRODE, GAS-SHIELDED METAL ARC WELDING AND GAS WELDING - JOINT PREPARATIONS FOR STEEL
    BS EN ISO 5817:2014 Welding. Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded). Quality levels for imperfections
    ONORM EN ISO 25239-2 : 2012 FRICTION STIR WELDING - ALUMINIUM - PART 2: DESIGN OF WELD JOINTS (ISO 25239-2:2011)
    I.S. EN ISO 5817:2014 WELDING - FUSION-WELDED JOINTS IN STEEL, NICKEL, TITANIUM AND THEIR ALLOYS (BEAM WELDING EXCLUDED) - QUALITY LEVELS FOR IMPERFECTIONS (ISO 5817:2014)
    EN 1011-5:2003 Welding - Recommendations for welding of metallic materials - Part 5: Welding of clad steel
    EN 15085-3:2007/AC:2009 RAILWAY APPLICATIONS - WELDING OF RAILWAY VEHICLES AND COMPONENTS - PART 3: DESIGN REQUIREMENTS
    EN ISO 17659:2004 Welding - Multilingual terms for welded joints with illustrations (ISO 17659:2002)
    DIN EN 30042:1994-08 ARC-WELDED JOINTS IN ALUMINIUM AND ITS WELDABLE ALLOYS - GUIDANCE ON QUALITY LEVELS FOR IMPERFECTIONS
    EN 13001-3-1:2012+A2:2018 Cranes - General Design - Part 3-1: Limit States and proof competence of steel structure
    CEN/TS 13001-3-1:2004/AC:2006 CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF OF COMPETENCE OF STEEL STRUCTURES
    EN 1011-1:2009 Welding - Recommendations for welding of metallic materials - Part 1: General guidance for arc welding
    ONORM EN 15502-1 : 2015 GAS-FIRED HEATING BOILERS - PART 1: GENERAL REQUIREMENTS AND TESTS
    I.S. EN 15085-3:2007 RAILWAY APPLICATIONS - WELDING OF RAILWAY VEHICLES AND COMPONENTS - PART 3: DESIGN REQUIREMENTS
    BS 499-2:1980 WELDING TERMS AND SYMBOLS - SPECIFICATION FOR SYMBOLS FOR WELDING
    DIN EN ISO 25239-2:2012-03 FRICTION STIR WELDING - ALUMINIUM - PART 2: DESIGN OF WELD JOINTS (ISO 25239-2:2011)
    11/30050625 DC : 0 BS EN ISO 2553 - WELDING AND ALLIED PROCESSES - SYMBOLIC REPRESENTATION ON DRAWINGS - WELDED, BRAZED AND SOLDERED JOINTS
    DIN EN 15420:2011-03 GAS-FIRED CENTRAL HEATING BOILERS - TYPE C BOILERS OF NOMINAL HEAT INPUT EXCEEDING 70 KW, BUT NOT EXCEEDING 1 000 KW
    DIN ISO 128-22:1999-11 Technical drawings - General principles of presentation - Part 22: Basic conventions and applications for leader lines and reference lines (ISO 128-22:1999)
    I.S. EN 483:2000 GAS-FIRED CENTRAL HEATING BOILERS - TYPE C BOILERS OF NOMINAL HEAT INPUT NOT EXCEEDING 70 KW
    PREN 1090-3 : DRAFT 2017 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES
    16/30321073 DC : 0 BS ISO 129-5 - TECHNICAL PRODUCT DOCUMENTATION (TPD) - PRESENTATION OF DIMENSIONS AND TOLERANCES - PART 5: DIMENSIONING OF STRUCTURAL METAL WORK
    UNI EN 1708-3 : 2012 WELDING - BASIC WELD JOINT DETAILS IN STEEL - PART 3: CLAD, BUTTERED AND LINED PRESSURIZED COMPONENTS
    NF EN 15420 : 2012 GAS-FIRED CENTRAL HEATING BOILERS - TYPE C BOILERS OF NOMINAL HEAT INPUT EXCEEDING 70 KW, BUT NOT EXCEEDING 1000 KW
    14/30274816 DC : 0 BS EN ISO 16089 - MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES
    PREN 1708-2 : DRAFT 2017 WELDING - BASIC WELD JOINT DETAILS IN STEEL - PART 2: NON INTERNAL PRESSURIZED COMPONENTS
    16/30336476 DC : 0 BS EN 287-6 - QUALIFICATION TEST OF WELDERS - FUSION WELDING - PART 6: CAST IRON
    DD CEN/TS 13001-3-1 : 2004 CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF OF COMPETENCE OF STEEL STRUCTURES
    PREN 12953-4 : DRAFT 2017 SHELL BOILERS - PART 4: WORKMANSHIP AND CONSTRUCTION OF PRESSURE PARTS OF THE BOILER
    17/30348961 DC : 0 BS EN 12953-4 - SHELL BOILERS - PART 4: WORKMANSHIP AND CONSTRUCTION OF PRESSURE PARTS OF THE BOILER
    I.S. EN ISO 10042:2006 WELDING - ARC-WELDED JOINTS IN ALUMINIUM AND ITS ALLOYS - QUALITY LEVELS FOR IMPERFECTIONS
    BS EN 13445-8 : 2014 UNFIRED PRESSURE VESSELS - PART 8: ADDITIONAL REQUIREMENTS FOR PRESSURE VESSELS OF ALUMINIUM AND ALUMINIUM ALLOYS
    BS EN 50465:2015 European product standard for combined heating power systems using gas fuel
    PREN 303-5 : DRAFT 2010 CENTRAL-HEATING BOILERS - PART 5: HEATING BOILERS FOR SOLID FUELS, HAND AND AUTOMATICALLY STOKED, NOMINAL HEAT OUTPUT OF UP TO 500 KW - TERMINOLOGY, REQUIREMENTS, TESTING AND MARKING
    UNE-EN 15420:2012 Gas-fired central heating boilers - Type C boilers of nominal heat input exceeding 70 kW, but not exceeding 1 000 kW
    NF ISO 128-1 : 2003 TECHNICAL DRAWINGS - GENERAL PRINCIPLES OF PRESENTATION - PART 1: INTRODUCTION AND INDEX
    BS ISO 24394 : 2008 WELDING FOR AEROSPACE APPLICATIONS - QUALIFICATION TEST FOR WELDERS AND WELDING OPERATORS - FUSION WELDING OF METALLICCOMPONENTS
    I.S. EN 13445-8:2014 UNFIRED PRESSURE VESSELS - PART 8: ADDITIONAL REQUIREMENTS FOR PRESSURE VESSELS OF ALUMINIUM AND ALUMINIUM ALLOYS
    I.S. CEN TS 13001-3-1:2005 CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF OF COMPETENCE OF STEEL STRUCTURES
    BS EN ISO 10042:2005 WELDING - ARC-WELDED JOINTS IN ALUMINIUM AND ITS ALLOYS - QUALITY LEVELS FOR IMPERFECTIONS
    DIN EN ISO 12215-6:2008-07 SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 6: STRUCTURAL ARRANGEMENTS AND DETAILS
    PREN 448 : DRAFT 2018 DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - FITTING ASSEMBLIES OF STEEL SERVICE PIPES, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE
    ISO 12215-6:2008 Small craft — Hull construction and scantlings — Part 6: Structural arrangements and details
    BS EN 24063:1992 WELDING, BRAZING, SOLDERING AND BRAZE WELDING OF METALS - NOMENCLATURE OF PROCESSES AND REFERENCE NUMBERS FOR SYMBOLIC REPRESENTATION ON DRAWINGS
    17/30359535 DC : 0 BS EN 1708-2 - WELDING - BASIC WELD JOINT DETAILS IN STEEL - PART 2: NON INTERNAL PRESSURIZED COMPONENTS
    PREN 50465 : DRAFT 2011 GAS APPLIANCES - COMBINED HEAT AND POWER APPLIANCE OF NOMINAL HEAT INPUT INFERIOR OR EQUAL TO 70 KW
    EN 50465 : 2015 GAS APPLIANCES - COMBINED HEAT AND POWER APPLIANCE OF NOMINAL HEAT INPUT INFERIOR OR EQUAL TO 70 KW
    ISO/TS 7024:2005 Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings — Thermoplastics — Recommended practice for installation
    EN ISO 5817:2014 Welding - Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) - Quality levels for imperfections (ISO 5817:2014)
    I.S. EN 50465:2015 GAS APPLIANCES - COMBINED HEAT AND POWER APPLIANCE OF NOMINAL HEAT INPUT INFERIOR OR EQUAL TO 70 KW
    DIN EN 1011-1:2009-07 WELDING - RECOMMENDATIONS FOR WELDING OF METALLIC MATERIALS - PART 1: GENERAL GUIDANCE FOR ARC WELDING
    DIN EN ISO 17659:2005-09 WELDING - MULTILINGUAL TERMS FOR WELDED JOINTS WITH ILLUSTRATIONS
    DIN EN ISO 9692-1:2013-12 WELDING AND ALLIED PROCESSES - TYPES OF JOINT PREPARATION - PART 1: MANUAL METAL-ARC WELDING, GAS-SHIELDED METAL-ARC WELDING, GAS WELDING, TIG WELDING AND BEAM WELDING OF STEELS (ISO 9692-1:2013)
    DIN EN 2574:1991-09 AEROSPACE SERIES; WELDS; INFORMATION ON DRAWINGS
    DIN EN ISO 9692-2:1999-09 Welding and allied processes - Joint preparation - Part 2: Submerged arc welding of steels (ISO 9692-2:1998, includes Corrigendum AC:1999); German version EN ISO 9692-2:1998 + AC:1999
    DIN EN 303-5:2012-10 Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW - Terminology, requirements, testing and marking
    BS EN ISO 9692-2:1998 Welding and allied processes. Joint preparation Submerged arc welding of steels
    UNE-EN ISO 9692-3:2016 Welding and allied processes - Types of joint preparation - Part 3: Metal inert gas welding and tungsten inert gas welding of aluminium and its alloys (ISO 9692-3:2016)
    ISO 25239-2:2011 Friction stir welding Aluminium Part 2: Design of weld joints
    EN ISO 9692-2:1998/AC:1999 WELDING AND ALLIED PROCESSES - JOINT PREPARATION - PART 2: SUBMERGED ARC WELDING OF STEELS
    BS EN 1011-5:2003 (published 2003-05) Welding. Recommendations for welding of metallic materials Welding of clad steel
    BS EN 30042:1994 ARC WELDED JOINTS IN ALUMINIUM AND ITS WELDABLE ALLOYS - GUIDANCE ON QUALITY LEVELS FOR IMPERFECTIONS
    BS EN 13218 : 2002 MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES
    I.S. EN ISO 9013:2017 THERMAL CUTTING - CLASSIFICATION OF THERMAL CUTS - GEOMETRICAL PRODUCT SPECIFICATION AND QUALITY TOLERANCES (ISO 9013:2017)
    DIN EN 13218:2010-09 MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES
    I.S. EN ISO 9692-1:2013 WELDING AND ALLIED PROCESSES - TYPES OF JOINT PREPARATION - PART 1: MANUAL METAL ARC WELDING, GAS-SHIELDED METAL ARC WELDING, GAS WELDING, TIG WELDING AND BEAM WELDING OF STEELS (ISO 9692-1:2013)
    DIN EN 13218:2002-09 MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES
    I.S. EN 1011-1:2009 WELDING - RECOMMENDATIONS FOR WELDING OF METALLIC MATERIALS - PART 1: GENERAL GUIDANCE FOR ARC WELDING
    I.S. EN ISO 9692-3:2016 WELDING AND ALLIED PROCESSES - TYPES OF JOINT PREPARATION PART 3: METAL INERT GAS WELDING AND TUNGSTEN INERT GAS WELDING OF ALUMINIUM AND ITS ALLOYS (ISO 9692-3:2016)
    I.S. EN 303-1:2017 HEATING BOILERS - PART 1: HEATING BOILERS WITH FORCED DRAUGHT BURNERS - TERMINOLOGY, GENERAL REQUIREMENTS, TESTING AND MARKING
    I.S. EN 303-5:2012 HEATING BOILERS - PART 5: HEATING BOILERS FOR SOLID FUELS, MANUALLY AND AUTOMATICALLY STOKED, NOMINAL HEAT OUTPUT OF UP TO 500 KW - TERMINOLOGY, REQUIREMENTS, TESTING AND MARKING
    I.S. EN 14394:2006 HEATING BOILERS - HEATING BOILERS WITH FORCED DRAUGHT BURNERS - NOMINAL HEAT OUTPUT NOT EXCEEDING 10 MW AND MAXIMUM OPERATING TEMPERATURE OF 110 DEGREE C
    UNI EN 15085-3 : 2008 RAILWAY APPLICATIONS - WELDING OF RAILWAY VEHICLES AND COMPONENTS - PART 3: DESIGN REQUIREMENTS
    BS 308-3:1990 ENGINEERING DRAWING PRACTICE - RECOMMENDATIONS FOR GEOMETRICAL TOLERANCING
    BS 308-1:1984 ENGINEERING DRAWING PRACTICE - RECOMMENDATIONS FOR GENERAL PRINCIPLES
    BS 308-2:1985 ENGINEERING DRAWING PRACTICE - RECOMMENDATIONS FOR DIMENSIONING AND TOLERANCING OF SIZE
    EN 303-5:2012 Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW - Terminology, requirements, testing and marking
    UNI EN ISO 12932 : 2013 WELDING - LASER-ARC HYBRID WELDING OF STEELS, NICKEL AND NICKEL ALLOYS - QUALITY LEVELS FOR IMPERFECTIONS
    12/30250731 DC : 0 BS ISO 5817 - WELDING - FUSION-WELDED JOINTS IN STEEL, NICKEL, TITANIUM AND THEIR ALLOYS (BEAM WELDING EXCLUDED) - QUALITY LEVELS FOR IMPERFECTIONS
    I.S. EN 297:1994 GAS FIRED CENTRAL HEATING BOILERS - TYPE B11 AND B11BS BOILERS FITTED WITH ATMOSPHERIC BURNERS OF NOMINAL HEAT INPUT NOT EXCEEDING 70 KW
    DIN EN ISO 10042:2006-02 WELDING - ARC-WELDED JOINTS IN ALUMINIUM AND ITS ALLOYS - QUALITY LEVELS FOR IMPERFECTIONS
    DIN EN ISO 12932:2013-10 WELDING - LASER-ARC HYBRID WELDING OF STEELS, NICKEL AND NICKEL ALLOYS - QUALITY LEVELS FOR IMPERFECTIONS (ISO 12932:2013)
    BS ISO 17533:2015 WELDING FOR AEROSPACE APPLICATIONS - WELDING INFORMATION IN DESIGN DOCUMENTS
    BS ISO 128-22:1999 Technical drawings. General principles of presentation Basic conventions and applications for leader lines and reference lines
    10/30218092 DC : 0 BS EN 15502-1 - GAS-FIRED HEATING BOILERS - PART 1: GENERAL REQUIREMENTS AND TESTS
    06/30149018 DC : 0 EN 15502-1 - GAS-FIRED CENTRAL HEATING BOILERS - PART 1: GENERAL REQUIREMENTS AND TESTS
    UNI EN 303-5 : 2012 HEATING BOILERS - PART 5: HEATING BOILERS FOR SOLID FUELS, MANUALLY AND AUTOMATICALLY STOKED, NOMINAL HEAT OUTPUT OF UP TO 500 KW - TERMINOLOGY, REQUIREMENTS, TESTING AND MARKING
    UNI EN ISO 12215-6 : 2008 SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 6: STRUCTURAL ARRANGEMENTS AND DETAILS
    BS EN ISO 25239-2:2011 FRICTION STIR WELDING - ALUMINIUM - PART 2: DESIGN OF WELD JOINTS (ISO 25239-2:2011)
    07/30171111 DC : DRAFT AUG 2007 BS EN ISO 25239-2 - FRICTION STIR WELDING - ALUMINIUM - PART 2: DESIGN OF WELD JOINTS
    BS ISO 14617-3:2002 (published 2004-08) Graphical symbols for diagrams Connections and related devices
    DIN EN 15420 E : NOV 2011 GAS-FIRED CENTRAL HEATING BOILERS - TYPE C BOILERS OF NOMINAL HEAT INPUT EXCEEDING 70 KW, BUT NOT EXCEEDING 1000 KW
    UNI CEN/TS 13001-3-1 : 2005 CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF OF COMPETENCE OF STEEL STRUCTURES
    16/30325071 DC : 0 BS EN ISO 17279-1 - WELDING - MIRCO JOINING OF 2ND GENERATION HIGH TEMPERATURE SUPERCONDUCTORS - PART 1: GENERAL REQUIREMENTS FOR THE PROCEDURE
    BS EN ISO 12932:2013 WELDING - LASER-ARC HYBRID WELDING OF STEELS, NICKEL AND NICKEL ALLOYS - QUALITY LEVELS FOR IMPERFECTIONS
    08/30181655 DC : DRAFT SEP 2008 BS EN 13001-3-1 - CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF OF COMPETENCE OF STEEL STRUCTURES
    10/30228886 DC : 0 BS EN 303-5 - CENTRAL-HEATING BOILERS - PART 5: HEATING BOILERS FOR SOLID FUELS, HAND AND AUTOMATICALLY STOKED, NOMINAL HEAT OUTPUT OF UP TO 500 KW - TERMINOLOGY, REQUIREMENTS, TESTING AND MARKING
    I.S. EN 12953-4:2002 SHELL BOILERS - PART 4: WORKMANSHIP AND CONSTRUCTION OF PRESSURE PARTS OF THE BOILER
    UNI EN 15420 : 2011 GAS-FIRED CENTRAL HEATING BOILERS - TYPE C BOILERS OF NOMINAL HEAT INPUT EXCEEDING 70 KW, BUT NOT EXCEEDING 1000 KW
    I.S. EN 1090-3:2008 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES
    PREN 287-6 : DRAFT 2016 QUALIFICATION TEST OF WELDERS - FUSION WELDING - PART 6: CAST IRON
    PREN 287-1 : DRAFT 2010 QUALIFICATION TEST OF WELDERS - FUSION WELDING - PART 1: STEELS
    NF EN ISO 25239-2 : 2012 FRICTION STIR WELDING - ALUMINIUM - PART 2: DESIGN OF WELDED JOINTS
    ISO 17533:2015 Welding for aerospace applications — Welding information in design documents
    BS EN ISO 16089:2015 Machine tools. Safety. Stationary grinding machines
    EN 13445-8 : 2014 COR 2017 UNFIRED PRESSURE VESSELS - PART 8: ADDITIONAL REQUIREMENTS FOR PRESSURE VESSELS OF ALUMINIUM AND ALUMINIUM ALLOYS
    ISO 16089:2015 Machine tools Safety Stationary grinding machines
    ISO 10721-2:1999 Steel structures — Part 2: Fabrication and erection
    EN 1090-3:2008 Execution of steel structures and aluminium structures - Part 3: Technical requirements for aluminium structures
    UNE-EN ISO 5817:2014 Welding - Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) - Quality levels for imperfections (ISO 5817:2014)
    DIN EN ISO 9013 E : 2003 THERMAL CUTTING - CLASSIFICATION OF THERMAL CUTS - GEOMETRICAL PRODUCT SPECIFICATION AND QUALITY TOLERANCES (ISO 9013:2017)
    DIN EN 15085-3:2010-01 Railway applications - Welding of railway vehicles and components - Part 3: Design requirements
    DIN EN 287-1:2011-11 QUALIFICATION TEST OF WELDERS - FUSION WELDING - PART 1: STEELS
    DIN EN 14276-1:2011-05 PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS
    DIN EN 448:2016-02 DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - FITTING ASSEMBLIES OF STEEL SERVICE PIPES, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE
    DIN EN 14276-2:2011-05 PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 2: PIPING - GENERAL REQUIREMENTS
    DIN ISO 24394:2013-12 WELDING FOR AEROSPACE APPLICATIONS - QUALIFICATION TEST FOR WELDERS AND WELDING OPERATORS - FUSION WELDING OF METALLIC COMPONENTS (ISO 24394:2008 + AMD. 1:2013)
    DIN EN 14394 E : 2008 HEATING BOILERS - HEATING BOILERS WITH FORCED DRAUGHT BURNERS - NOMINAL HEAT OUTPUT NOT EXCEEDING 10 MW AND MAXIMUM OPERATING TEMPERATURE OF 110 DEGREE C
    DIN EN 14394:2008-12 HEATING BOILERS - HEATING BOILERS WITH FORCED DRAUGHT BURNERS - NOMINAL HEAT OUTPUT NOT EXCEEDING 10 MW AND MAXIMUM OPERATING TEMPERATURE OF 110 DEGREE C
    DIN EN ISO 9013:2003-07 THERMAL CUTTING - CLASSIFICATION OF THERMAL CUTS - GEOMETRICAL PRODUCT SPECIFICATION AND QUALITY TOLERANCES (ISO 9013:2017)
    UNE-EN ISO 9013:2017 Thermal cutting - Classification of thermal cuts - Geometrical product specification and quality tolerances (ISO 9013:2017)
    ISO 12932:2013 Welding Laser-arc hybrid welding of steels, nickel and nickel alloys Quality levels for imperfections
    BS EN 15085-3:2007 Railway applications. Welding of railway vehicles and components Design requirements
    BS EN ISO 9692-3:2001 WELDING AND ALLIED PROCESSES - TYPES OF JOINT PREPARATION - PART 3: METAL INERT GAS WELDING AND TUNGSTEN INERT GAS WELDING OF ALUMINIUM AND ITS ALLOYS (ISO 9692-3:2016)
    EN 14276-1:2020 Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General requirements
    UNI EN 14276-2 : 2011 PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 2: PIPING - GENERAL REQUIREMENTS
    UNI EN 14276-1 : 2011 PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS
    UNE-EN 287-1:2011 Qualification test of welders - Fusion welding - Part 1: Steels
    EN ISO 25239-2:2011 Friction stir welding - Aluminium - Part 2: Design of weld joints (ISO 25239-2:2011)
    OVE/ONORM EN 50465 : 2015 GAS APPLIANCES - COMBINED HEAT AND POWER APPLIANCE OF NOMINAL HEAT INPUT INFERIOR OR EQUAL TO 70 KW
    EN ISO 9692-3:2016 Welding and allied processes - Types of joint preparation - Part 3: Metal inert gas welding and tungsten inert gas welding of aluminium and its alloys (ISO 9692-3:2016)
    UNI EN ISO 9692-1 : 2013 WELDING AND ALLIED PROCESSES - TYPES OF JOINT PREPARATION - PART 1: MANUAL METAL ARC WELDING, GAS-SHIELDED METAL ARC WELDING, GAS WELDING, TIG WELDING AND BEAM WELDING OF STEELS
    UNI EN 14394 : 2008 HEATING BOILERS - HEATING BOILERS WITH FORCED DRAUGHT BURNERS - NOMINAL HEAT OUTPUT NOT EXCEEDING 10 MW AND MAXIMUM OPERATING TEMPERATURE OF 110 DEGREES C
    EN 50465:2015 Gas appliances - Combined heat and power appliance of nominal heat input inferior or equal to 70 kW
    UNI EN ISO 5817 : 2014 WELDING - FUSION-WELDED JOINTS IN STEEL, NICKEL, TITANIUM AND THEIR ALLOYS (BEAM WELDING EXCLUDED) - QUALITY LEVELS FOR IMPERFECTIONS
    UNI EN 25817 : 1994 ARC-WELDED JOINTS IN STEEL - GUIDANCE ON QUALITY LEVELS FOR IMPERFECTIONS
    EN 483:1999/A4:2007 GAS-FIRED CENTRAL HEATING BOILERS - TYPE C BOILERS OF NOMINAL HEAT INPUT NOT EXCEEDING 70 KW
    UNI EN 13218 : 2008 MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES
    UNI EN ISO 9606-2 : 2006 Qualification test of welders - Fusion welding - Part 1: Aluminium and aluminium alloys
    UNI EN 1011-1 : 2009 WELDING - RECOMMENDATIONS FOR WELDING OF METALLIC MATERIALS - PART 1: GENERAL GUIDANCE FOR ARC WELDING
    UNI EN 287-1 : 2012 QUALIFICATION TEST OF WELDERS - FUSION WELDING - PART 1: STEELS
    UNI EN ISO 17659 : 2006 WELDING - MULTILINGUAL TERMS FOR WELDED JOINTS WITH ILLUSTRATIONS
    17/30351224 DC : 0 BS EN 14276-1 - PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS
    14/30261577 DC : 0 BS EN ISO 9013 - THERMAL CUTTING - CLASSIFICATION OF THERMAL CUTS - GEOMETRICAL PRODUCT SPECIFICATION AND QUALITY TOLERANCES
    I.S. EN ISO 9692-2:1998 WELDING AND ALLIED PROCESSES - JOINT PREPARATION - PART 2: SUBMERGED ARC WELDING OF STEELS
    12/30230676 DC : 0 BS EN ISO 16792 - TECHNICAL PRODUCT DOCUMENTATION - DIGITAL PRODUCT DEFINITION DATA PRACTICES
    00/705373 DC : DRAFT FEB 2000 PREN 13836 - GAS-FIRED CENTRAL HEATING BOILERS - TYPE B BOILERS OF NOMINAL HEAT INPUT EXCEEDING 300 KW BUT NOT EXCEEDING 1000 KW
    BIS IS 15942 : 2011 TECHNICAL DRAWINGS - SYMBOLIC PRESENTATION AND INDICATION OF ADHESIVE, FOLD AND PRESSED JOINTS
    14/30268550 DC : DRAFT OCT 2014 BS EN ISO 9692-3 - WELDING AND ALLIED PROCESSES - RECOMMENDATIONS FOR JOINT PREPARATION - PART 3: METAL INERT GAS WELDING AND TUNGSTEN INERT GAS WELDING OF ALUMINIUM AND ITS ALLOYS
    DIN ISO 17533:2016-09 WELDING FOR AEROSPACE APPLICATIONS - WELDING INFORMATION IN DESIGN DOCUMENTS (ISO 17533:2015)
    I.S. EN 1708-3:2012 WELDING - BASIC WELD JOINT DETAILS IN STEEL - PART 3: CLAD, BUTTERED AND LINED PRESSURIZED COMPONENTS
    04/30080839 DC : DRAFT APR 2004 BS EN ISO 10042 - WELDING - ARC-WELDED JOINTS IN ALUMINIUM AND ITS ALLOYS - QUALITY LEVELS FOR IMPERFECTIONS
    04/30114360 DC : DRAFT JUN 2004 ISO 17713-1 - METEOROLOGY - WIND MEASUREMENTS - PART 1: WIND TUNNEL TEST METHODS FOR ROTATING ANEMOMETER PERFORMANCE
    08/30178313 DC : 0 BS ISO 11745 - BRAZING FOR AEROSPACE APPLICATIONS - QUALIFICATION TEST OF BRAZERS AND BRAZING OPERATORS - BRAZING OF METALLIC COMPONENTS
    UNI ISO 128-25 : 2011 TECHNICAL DRAWINGS - GENERAL PRINCIPLES OF PRESENTATION - PART 25: LINES ON SHIPBUILDING DRAWINGS
    DIN 28082-2:2016-08 SKIRTS FOR APPARATUS - PART 2: BOTTOM RING WITH BRACKET SUPPORTS OR TWIN RING WITH WEBS
    BS ISO 16792:2006 Technical product documentation. Digital product definition data practices
    DIN EN 15502-1:2015-10 Gas-fired heating boilers - Part 1: General requirements and tests (includes Amendment A1:2015)
    I.S. EN 287-6:2010 QUALIFICATION TEST OF WELDERS - FUSION WELDING - PART 6: CAST IRON
    AWS C4.6M : 2006 : R2012 THERMAL CUTTING - CLASSIFICATION OF THERMAL CUTS - GEOMETRIC PRODUCT SPECIFICATION AND QUALITY TOLERANCES
    DIN ISO 17533 E : 2016 WELDING FOR AEROSPACE APPLICATIONS - WELDING INFORMATION IN DESIGN DOCUMENTS (ISO 17533:2015)
    UNI EN 287-6 : 2010 QUALIFICATION TEST OF WELDERS - FUSION WELDING - PART 6: CAST IRON
    DIN EN 287-6:2016-03 (Draft) QUALIFICATION TEST OF WELDERS - FUSION WELDING - PART 6: CAST IRON
    ONORM EN ISO 10042 : 2006 AC 2006 WELDING - ARC-WELDED JOINTS IN ALUMINIUM AND ITS ALLOYS - QUALITY LEVELS FOR IMPERFECTIONS
    I.S. EN 13001-3-1:2012 CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF COMPETENCE OF STEEL STRUCTURE
    I.S. EN ISO 16089:2015 MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES (ISO/DIS 16089:2014)
    17/30348949 DC : 0 BS EN 1090-3 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES
    17/30351221 DC : 0 BS EN 14276-2 - PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 2: PIPING - GENERAL REQUIREMENTS
    EN ISO 10042:2005 Welding - Arc-welded joints in aluminium and its alloys - Quality levels for imperfections (ISO 10042:2005)
    EN 287-6:2018 Qualification test of welders - Fusion welding - Part 6: Cast irons
    ISO/TR 17671-5:2004 Welding Recommendations for welding of metallic materials Part 5: Welding of clad steels
    ISO 14617-3:2002 Graphical symbols for diagrams Part 3: Connections and related devices
    BS EN ISO 9013:2017 Thermal cutting. Classification of thermal cuts. Geometrical product specification and quality tolerances
    17/30337995 DC : DRAFT MAY 2017 BS ISO 24394 - WELDING FOR AEROSPACE APPLICATIONS - QUALIFICATION TEST FOR WELDERS AND WELDING OPERATORS - FUSION WELDING OF METALLIC COMPONENTS
    07/30141879 DC : 0 ISO 24394 - WELDING IN AEROSPACE - QUALIFICATION TEST FOR WELDERS AND WELDING OPERATORS - WELDING OF METALLIC COMPONENTS
    BS EN 14394 : 2005 HEATING BOILERS - HEATING BOILERS WITH FORCED DRAUGHT BURNERS - NOMINAL HEAT OUTPUT NOT EXCEEDING 10 MW AND MAXIMUM OPERATING TEMPERATURE OF 110 DEGREE C
    UNE-EN ISO 9692-1:2014 Welding and allied processes - Types of joint preparation - Part 1: Manual metal arc welding, gas-shielded metal arc welding, gas welding, TIG welding and beam welding of steels (ISO 9692-1:2013)
    ISO 9692:1992 Metal-arc welding with covered electrode, gas-shielded metal-arc welding and gas welding Joint preparations for steel
    BS EN 656:2000 Gas-fired central heating boilers. Type B boilers of nominal heat input exceeding 70 kW, but not exceeding 300 kW
    ISO 128-1:2003 Technical drawings General principles of presentation Part 1: Introduction and index
    BS EN 13836:2006 Gas fired central heating boilers. Type B boilers of nominal heat input exceeding 300 kW, but not exceeding 1000 kW
    BS EN ISO 17659:2004 (published 2004-07) Welding. Multilingual terms for welded joints with illustrations
    BS EN 14276-2 : 2007 PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 2: PIPING - GENERAL REQUIREMENTS
    ISO 9692-3:2016 Welding and allied processes Types of joint preparation Part 3: Metal inert gas welding and tungsten inert gas welding of aluminium and its alloys
    ISO 5817:2014 Welding — Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) — Quality levels for imperfections
    ISO 15785:2002 Technical drawings Symbolic presentation and indication of adhesive, fold and pressed joints
    BS EN 483 : 2000 GAS-FIRED CENTRAL HEATING BOILERS - TYPE C BOILERS OF NOMINAL HEAT INPUT NOT EXCEEDING 70 KW
    BS EN 1011-1:2009 (published 2009-03) Welding. Recommendations for welding of metallic materials General guidance for arc welding
    I.S. EN 14276-2:2007 PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 2: PIPING - GENERAL REQUIREMENTS
    EN 14276-1:2006+A1:2011 Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General requirements
    ISO 9013:2017 Thermal cutting — Classification of thermal cuts — Geometrical product specification and quality tolerances
    BS EN 14276-1 : 2006 PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS
    ISO 9692-2:1998 Welding and allied processes — Joint preparation — Part 2: Submerged arc welding of steels
    EN 14276-2:2007+A1:2011 Pressure equipment for refrigerating systems and heat pumps - Part 2: Piping - General requirements
    BS EN ISO 15785:2002 Technical drawings. Symbolic presentation and indication of adhesive fold and pressed joints
    UNE-EN 448:2017 District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Fitting assemblies of steel service pipes, polyurethane thermal insulation and outer casing of polyethylene
    BS EN 303-4:1999 HEATING BOILERS - HEATING BOILERS WITH FORCED DRAUGHT BURNERS - SPECIAL REQUIREMENTS FOR BOILERS WITH FORCED DRAUGHT OIL BURNERS WITH OUTPUTS UP TO 70 KW AND A MAXIMUM OPERATING PRESSURE OF 3 BAR - TERMINOLOGY, SPECIAL REQUIREMENTS, TESTING AND MARKING
    EN ISO 4172:1996 Technical drawings - Construction drawings - Drawings for the assembly of prefabricated structures (ISO 4172:1991)
    EN 297:1994/A2:1996/AC:2006 GAS-FIRED CENTRAL HEATING BOILERS - TYPE B[11] AND B[11BS] BOILERS FITTED WITH ATMOSPHERIC BURNERS OF NOMINAL HEAT INPUT NOT EXCEEDING 70 KW
    EN ISO 9692-1:2013 Welding and allied processes - Types of joint preparation - Part 1: Manual metal arc welding, gas-shielded metal arc welding, gas welding, TIG welding and beam welding of steels (ISO 9692-1:2013)
    EN 15420:2010 Gas-fired central heating boilers - Type C boilers of nominal heat input exceeding 70 kW, but not exceeding 1 000 kW
    EN 14394:2005+A1:2008 Heating boilers - Heating boilers with forced draught burners - Nominal heat output not exceeding 10 MW and maximum operating temperature of 110 °C
    EN ISO 12932:2013 Welding - Laser-arc hybrid welding of steels, nickel and nickel alloys - Quality levels for imperfections (ISO 12932:2013)
    EN ISO 9013:2017 Thermal cutting - Classification of thermal cuts - Geometrical product specification and quality tolerances (ISO 9013:2017)
    EN 287-1:2011 Qualification test of welders - Fusion welding - Part 1: Steels
    EN 30042 : 1994 ARC WELDED JOINTS IN ALUMINIUM AND ITS WELDABLE ALLOYS - GUIDANCE ON QUALITY LEVELS FOR IMPERFECTIONS
    EN 656:1999/A1:2006 GAS-FIRED CENTRAL HEATING BOILERS - TYPE B BOILERS OF NOMINAL HEAT INPUT EXCEEDING 70 KW BUT NOT EXCEEDING 300 KW
    EN 24063 : 1992 WELDING, BRAZING, SOLDERING AND BRAZE WELDING OF METALS - NOMENCLATURE OF PROCESSES AND REFERENCE NUMBERS FOR SYMBOLIC REPRESENTATION ON DRAWINGS
    EN 13218:2002+A1:2008/AC:2010 MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES
    EN 25817 : 1992 ARC WELDED JOINTS IN STEEL - GUIDANCE ON QUALITY LEVELS FOR IMPERFECTIONS
    EN ISO 15785:2002 Technical drawings - Symbolic presentation and indication of adhesive, fold and pressed joints (ISO 15785:2002)
    EN 13836:2006 Gas fired central heating boilers - Type B boilers of nominal heat input exceeding 300 kW, but not exceeding 1 000 kW
    EN ISO 9606-2:2004 Qualification test of welders - Fusion welding - Part 2: Aluminium and aluminium alloys (ISO 9606-2:2004)
    EN 303-1:2017 Heating boilers - Part 1: Heating boilers with forced draught burners - Terminology, general requirements, testing and marking
    EN ISO 16089:2015 Machine tools - Safety - Stationary grinding machines (ISO 16089:2015)
    EN 448:2015 District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Fitting assemblies of steel service pipes, polyurethane thermal insulation and outer casing of polyethylene
    EN 303-4:1999 Heating boilers - Part 4: Heating boilers with forced draught burners - Special requirements for boilers with forced draught oil burners with outputs up to 70 kW and a maximum operating pressure of 3 bar - Terminology, special requirements, testing and marking
    UNI EN 656 : 2008 GAS-FIRED CENTRAL HEATING BOILERS - TYPE B BOILERS OF NOMINAL HEAT INPUT EXCEEDING 70 KW, BUT NOT EXCEEDING 300 KW
    EN 29692 : 1994 METAL-ARC WELDING WITH COVERED ELECTRODE, GAS-SHIELDED METAL-ARC WELDING AND GAS WELDING - JOINT PREPARATIONS FOR STEEL
    13/30257205 DC : 0 BS ISO 17533 - WELDING FOR AEROSPACE APPLICATIONS - WELDING DATA IN DESIGN DOCUMENTS
    DIN EN 303-1:2016-07 (Draft) HEATING BOILERS - PART 1: HEATING BOILERS WITH FORCED DRAUGHT BURNERS - TERMINOLOGY, GENERAL REQUIREMENTS, TESTING AND MARKING
    BS EN 15420:2010 Gas-fired central heating boilers. Type C boilers of nominal heat input exceeding 70 kW, but not exceeding 1000 kW
    10/30235392 DC : 0 BS EN 287-1 - QUALIFICATION TEST OF WELDERS - FUSION WELDING - PART 1: STEELS
    BS ISO 128-25:1999 Technical drawings. General principles of presentation Lines on shipbuilding drawings
    I.S. EN ISO 9606-2:2005 QUALIFICATION TEST OF WELDERS - FUSION WELDING - PART 2: ALUMINIUM AND ALUMINIUM ALLOYS
    11/30249911 DC : 0 BS EN 50465 - GAS APPLIANCES - COMBINED HEAT AND POWER APPLIANCE OF NOMINAL HEAT INPUT INFERIOR OR EQUAL TO 70 KW
    BS EN 1708-2:2000 WELDING - BASIC WELD JOINT DETAILS IN STEEL: PART 2: NON-INTERNAL PRESSURIZED COMPONENTS
    UNI EN ISO 25239-2 : 2012 FRICTION STIR WELDING - ALUMINIUM - PART 2: DESIGN OF WELD JOINTS
    17/30353044 DC : 0 BS EN ISO 2553 - WELDING AND ALLIED PROCESSES - SYMBOLIC REPRESENTATION ON DRAWINGS - WELDED JOINTS
    PREN 13445-8 : DRAFT 2013 UNFIRED PRESSURE VESSELS - PART 8: ADDITIONAL REQUIREMENTS FOR PRESSURE VESSELS OF ALUMINIUM AND ALUMINIUM ALLOYS
    PREN 15502-1 : DRAFT 2010 GAS-FIRED HEATING BOILERS - PART 1: GENERAL REQUIREMENTS AND TESTS
    I.S. EN ISO 12932:2013 WELDING - LASER-ARC HYBRID WELDING OF STEELS, NICKEL AND NICKEL ALLOYS - QUALITY LEVELS FOR IMPERFECTIONS (ISO 12932:2013)
    PREN 14276-1 : DRAFT 2017 PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS
    I.S. EN ISO 25239-2:2011 FRICTION STIR WELDING - ALUMINIUM - PART 2: DESIGN OF WELD JOINTS (ISO 25239-2:2011)
    18/30368651 DC : 0 BS EN 448 - DISTRICT HEATING PIPES - BONDED SINGLE PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - FACTORY MADE FITTING ASSEMBLIES OF STEEL SERVICE PIPES, POLYURETHANE THERMAL INSULATION AND A CASING OF POLYETHYLENE
    UNE-EN ISO 12932:2014 Welding - Laser-arc hybrid welding of steels, nickel and nickel alloys - Quality levels for imperfections (ISO 12932:2013)
    BS EN 1090-3:2008 Execution of steel structures and aluminium structures Technical requirements for aluminium structures
    NORSOK M 101:2011 STRUCTURAL STEEL FABRICATION
    ISO 16792:2015 Technical product documentation Digital product definition data practices
    DIN EN 13001-3-1:2013-12 CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF COMPETENCE OF STEEL STRUCTURE
    DIN EN ISO 16089:2016-06 MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES (ISO 16089:2015)
    UNE-EN 1090-3:2011 Execution of steel structures and aluminium structures - Part 3: Technical requirements for aluminium structures
    EN 12953-4:2018 Shell boilers - Part 4: Workmanship and construction of pressure parts of the boiler
    UNI EN 13445-8 : 2015 UNFIRED PRESSURE VESSELS - PART 8: ADDITIONAL REQUIREMENTS FOR PRESSURE VESSELS OF ALUMINIUM AND ALUMINIUM ALLOYS
    BS EN 448:2015 DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - FITTING ASSEMBLIES OF STEEL SERVICE PIPES, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE
    I.S. EN ISO 12215-6:2008 SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 6: STRUCTURAL ARRANGEMENTS AND DETAILS
    DIN EN ISO 9606-2:2005-03 Qualification test of welders - Fusion welding - Part 2: Aluminium and aluminium alloys (ISO 9606-2:2004); German version EN ISO 9606-2:2004
    ISO 9692-1:2013 Welding and allied processes — Types of joint preparation — Part 1: Manual metal arc welding, gas-shielded metal arc welding, gas welding, TIG welding and beam welding of steels
    BS EN ISO 4172:1997 Technical drawings. Construction drawings. Drawings for the assembly of prefabricated structures
    ISO 9606-2:2004 Qualification test of welders Fusion welding Part 2: Aluminium and aluminium alloys
    UNE-EN 303-5:2013 Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW - Terminology, requirements, testing and marking
    ISO 17659:2002 Welding — Multilingual terms for welded joints with illustrations
    ISO 4172:1991 Technical drawings — Construction drawings — Drawings for the assembly of prefabricated structures
    BS EN 303-1:2017 Heating boilers Heating boilers with forced draught burners. Terminology, general requirements, testing and marking
    DIN EN 25817:1992-09 ARC-WELDED JOINTS IN STEEL - GUIDANCE ON QUALITY LEVELS FOR IMPERFECTIONS
    DIN EN 15420:2011-11 GAS-FIRED CENTRAL HEATING BOILERS - TYPE C BOILERS OF NOMINAL HEAT INPUT EXCEEDING 70 KW, BUT NOT EXCEEDING 1000 KW
    DIN EN ISO 15785:2002-12 TECHNICAL DRAWINGS - SYMBOLIC PRESENTATION AND INDICATION OF ADHESIVE, FOLD AND PRESSED JOINTS
    DIN EN 287-1:2004-05 QUALIFICATION TEST OF WELDERS - FUSION WELDING - PART 1: STEELS
    DIN EN ISO 5817:2006-10 WELDING - FUSION-WELDED JOINTS IN STEEL, NICKEL, TITANIUM AND THEIR ALLOYS (BEAM WELDING EXCLUDED) - QUALITY LEVELS FOR IMPERFECTIONS (ISO 5817:2014)
    DIN EN 13836:2007-06 Gas-fired central heating boilers - Type B boilers of nominal heat input exceeding 300 kW, but not exceeding 1000 kW

    Standards Referencing This Book - (Show below) - (Hide below)

    ISO 14341:2010 Welding consumables Wire electrodes and weld deposits for gas shielded metal arc welding of non alloy and fine grain steels Classification
    AWS A2.4 : 2012 STANDARD SYMBOLS FOR WELDING, BRAZING, AND NONDESTRUCTIVE EXAMINATION
    ISO 10042:2005 Welding Arc-welded joints in aluminium and its alloys Quality levels for imperfections
    ISO 14731:2006 Welding coordination Tasks and responsibilities
    AS 1101.3-2005 Graphical symbols for general engineering Welding and non-destructive examination
    ISO 5817:2014 Welding — Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) — Quality levels for imperfections
    ISO 1302:2002 Geometrical Product Specifications (GPS) Indication of surface texture in technical product documentation
    ISO 14171:2016 Welding consumables Solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of non alloy and fine grain steels Classification
    ISO/TR 25901:2007 Welding and related processes Vocabulary
    ISO 3098-2:2000 Technical product documentation — Lettering — Part 2: Latin alphabet, numerals and marks
    ISO 129-1:2004 Technical drawings Indication of dimensions and tolerances Part 1: General principles
    AS/NZS ISO 5817:2019 Welding - Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) – Quality levels for imperfections
    ISO 4063:2009 Welding and allied processes — Nomenclature of processes and reference numbers
    ISO 17659:2002 Welding — Multilingual terms for welded joints with illustrations
    ISO 6947:2011 Welding and allied processes Welding positions
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective