I.S. EN ISO 286-2:2010
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ISO CODE SYSTEM FOR TOLERANCES ON LINEAR SIZES - PART 2: TABLES OF STANDARD TOLERANCE CLASSES AND LIMIT DEVIATIONS FOR HOLES AND SHAFTS (ISO 286-2:2010) |
DIN EN ISO 10579:2013-11
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONING AND TOLERANCING - NON-RIGID PARTS (ISO 10579:2010 INCLUDING COR 1:2011) |
DIN EN ISO 10135:2010-02
|
Geometrical product specifications (GPS) - Drawing indications for moulded parts in technical product documentation (TPD) (ISO 10135:2007) |
BS ISO 8015:1985
|
Technical drawings. Fundamental tolerancing principle |
BS EN 60191-3:2000
|
Mechanical standardization of semiconductor devices General rules for the preparation of outline drawings of integrated circuits |
I.S. EN ISO 10579:2013
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONING AND TOLERANCING - NON-RIGID PARTS (ISO 10579:2010 INCLUDING COR 1:2011) |
DIN ISO 10230:2016-07
|
Cycles - Splined hub and sprocket - Mating dimensions (ISO 10230:1990) |
DIN ISO 5459:1982-01
|
TECHNICAL DRAWINGS; GEOMETRICAL TOLERANCING; DATUMS AND DATUM SYSTEMS FOR GEOMETRICAL TOLERANCES |
BS ISO 10135:1994
|
Technical drawings. Simplified representation of moulded, cast and forged parts |
BS A 294:1984
|
Specification for spline drive wrenching configuration. Metric series |
BS ISO 1101:1983
|
Technical drawings. Geometrical tolerancing. Tolerancing of form, orientation, location and run-out. Generalities, definitions, symbols, indications on drawings |
I.S. EN ISO 14638:2015
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - MATRIX MODEL (ISO 14638:2015) |
I.S. EN 60191-6:2009
|
MECHANICAL STANDARDIZATION OF SEMICONDUCTOR DEVICES - PART 6: GENERAL RULES FOR THE PREPARATION OF OUTLINE DRAWINGS OF SURFACE MOUNTED SEMICONDUCTOR DEVICE PACKAGES |
DIN 41612-6:1990-06
|
TWO-PART CONNECTORS FOR PRINTED BOARD; GRID 2,54 MM; DIMENSIONS OF TYPES Q, R AND S |
I.S. EN ISO 10135:2009
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DRAWING INDICATIONS FOR MOULDED PARTS IN TECHNICAL PRODUCT DOCUMENTATION (TPD) |
UNE-EN ISO 286-2:2011
|
Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts (ISO 286-2:2010) |
I.S. EN ISO 14405-2:2011
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 2: DIMENSIONS OTHER THAN LINEAR SIZES (ISO 14405-2:2011) |
UNI EN ISO 22432 : 2012
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FEATURES UTILIZED IN SPECIFICATION AND VERIFICATION |
ISO 14978:2006
|
Geometrical product specifications (GPS) General concepts and requirements for GPS measuring equipment |
UNE-EN ISO 14405-2:2015
|
Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear sizes (ISO 14405-2:2011) |
ISO 10579:2010
|
Geometrical product specifications (GPS) Dimensioning and tolerancing Non-rigid parts |
BS EN ISO 4759-3:2000
|
Tolerances for fasteners Plain washers for bolts, screws and nuts. Product grades A and C |
EN ISO 14638:2015
|
Geometrical product specifications (GPS) - Matrix model (ISO 14638:2015) |
DIN EN ISO 1101:2017-09
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - TOLERANCES OF FORM, ORIENTATION, LOCATION AND RUN-OUT (ISO 1101:2017) |
DIN SPEC 91184 E : 2014
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES (ISO/TS 8062-2:2013) |
BS EN ISO 10135:2009
|
Geometrical product specifications (GPS). Drawing indications for moulded parts in technical product documentation (TPD) |
BS ISO 2698:2016
|
Diesel engines. Clamp-mounted fuel injectors, types 7 and 28 |
DIN EN ISO 5458:2016-08 (Draft)
|
GEOMETRICAL PRODUCT SPECIFICATION (GPS) - GEOMETRICAL TOLERANCING - POSITIONAL TOLERANCING |
BS 2A 296:1995
|
Bolts and screws, metric. Tolerances of form and position |
DIN CEN ISO/TS 8062-2;DIN SPEC 91184:2014-03
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES (ISO/TS 8062-2:2013) |
ISO 10303-238:2007
|
Industrial automation systems and integration Product data representation and exchange Part 238: Application protocol: Application interpreted model for computerized numerical controllers |
DIN EN ISO 8015:2011-09
|
Geometrical product specifications (GPS) - Fundamentals - Concepts, principles and rules (ISO 8015:2011) |
15/30328996 DC : 0
|
BS ISO 2698 - DIESEL ENGINES - CLAMP-MOUNTED FUEL INJECTORS, TYPES 7 AND 28 |
BS ISO 8062-4:2017
|
Geometrical product specifications (GPS). Dimensional and geometrical tolerances for moulded parts General tolerances for castings using profile tolerancing in a general datum system |
PD CEN ISO/TS 8062-2:2013
|
Geometrical Product Specifications (GPS). Dimensional and geometrical tolerances for moulded parts Rules |
BS 4500-1.2(1990) : AMD 7631
|
ISO LIMITS AND FITS - GENERAL, TOLERANCES AND DEVIATIONS - TABLES OF COMMONLY USED TOLERANCE GRADES AND LIMIT DEVIATIONS FOR HOLES AND SHAFTS |
DIN ISO 4379:1995-10
|
PLAIN BEARINGS - COPPER ALLOY BUSHES |
CEI EN 61754-1 : 2014
|
FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CONNECTOR INTERFACES - PART 1: GENERAL AND GUIDANCE |
15/30295117 DC : 0
|
BS EN ISO 5458 - GEOMENTRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - POSITIONAL AND PATTERN TOLERANCING |
DIN EN ISO 22432:2012-03
|
Geometrical product specifications (GPS) - Features utilized in specification and verification (ISO 22432:2011) |
DIN CEN ISO/TS 8062-2; DIN SPEC 91184:2014-03
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES (ISO/TS 8062-2:2013) |
NF ISO 8015 : 2006
|
TECHNICAL DRAWINGS - FUNDAMENTAL TOLERANCING PRINCIPLE |
BS 2M 63:1993
|
Specification for dimensions of aerospace fluid system port connection, seal and fitting end |
14/30262683 DC : 0
|
BS ISO 8062-4 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 4: GENERAL TOLERANCES FOR CASTINGS USING PROFILE TOLERANCING IN A GENERAL DATUM SYSTEM |
BS EN ISO 286-2:2010
|
Geometrical product specifications (GPS). ISO code system for tolerances on linear sizes Tables of standard tolerance classes and limit deviations for holes and shafts |
UNI EN ISO 10135 : 2009
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DRAWING INDICATIONS FOR MOULDED PARTS IN TECHNICAL PRODUCT DOCUMENTATION (TPD) |
UNI ISO 10579 : 1995
|
TECHNICAL DRAWINGS - DIMENSIONS AND TOLERANCING - NON-RIGID-PARTS |
UNE-EN ISO 286-1:2011
|
Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 1: Basis of tolerances, deviations and fits (ISO 286-1:2010) |
BS EN ISO 14405-2:2011
|
Geometrical product specifications (GPS). Dimensional tolerancing Dimensions other than linear sizes |
BS EN ISO 5458:1999
|
Geometrical product specifications (GPS). Geometrical tolerancing. Positional tolerancing |
ISO 10303-214:2010
|
Industrial automation systems and integration Product data representation and exchange Part 214: Application protocol: Core data for automotive mechanical design processes |
EN ISO 14405-2:2011
|
Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear sizes (ISO 14405-2:2011) |
DIN EN ISO 14405-2:2012-03
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 2: DIMENSIONS OTHER THAN LINEAR SIZES (ISO 14405-2:2011) |
ISO 26303:2012
|
Machine tools Short-term capability evaluation of machining processes on metal-cutting machine tools |
UNI EN ISO 14978 : 2006
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS AND REQUIREMENTS FOR GPS MEASURING EQUIPMENT |
I.S. EN ISO 4759-3:2016
|
TOLERANCES FOR FASTENERS - PART 3: WASHERS FOR BOLTS, SCREWS AND NUTS - PRODUCT GRADES A, C AND F (ISO 4759-3:2016) |
DIN ISO 16792:2008-12
|
TECHNICAL PRODUCT DOCUMENTATION - DIGITAL PRODUCT DEFINITION DATA PRACTICES |
I.S. EN ISO 10303-210:2002
|
INDUSTRIAL AUTOMATION SYSTEMS AND INTEGRATION - PRODUCT DATA REPRESENTATION AND EXCHANGE - PART 210: APPLICATION PROTOCOL: ELECTRONIC ASSEMBLY, INTERCONNECTION, AND PACKAGING DESIGN |
I.S. EN ISO 1101:2017
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - TOLERANCES OF FORM, ORIENTATION, LOCATION AND RUN-OUT (ISO 1101:2017) |
I.S. EN ISO 1660:2017
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - PROFILE TOLERANCING (ISO 1660:2017) |
DIN ISO 2699:2002-02
|
DIESEL ENGINES - FLANGE-MOUNTED FUEL INJECTORS, SIZE "S" - TYPES 2, 3, 4, 5 AND 6 |
BS 308-1:1984
|
Engineering drawing practice Recommendations for general principles |
BS 308-3:1990
|
Engineering drawing practice Recommendations for geometrical tolerancing |
BS 308-2:1985
|
Engineering drawing practice Recommendations for dimensioning and tolerancing of size |
BS 6322-3:1992
|
Tolerances for fasteners Specification for tolerances of plain washers for bolts, screws and nuts with nominal thread diameters from 1 mm up to and including 150 mm. Product grades A and C |
BS 4480-3:1993
|
Plain bearings: metric series Copper alloy bushes |
EN ISO 5458 : 1998
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - POSITIONAL TOLERANCING (ISO 5458:1998) |
12/30259955 DC : 0
|
BS EN 61754-1 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CONNECTOR INTERFACES - PART 1: GENERAL AND GUIDANCE |
BS EN ISO 10579:2013
|
Geometrical product specifications (GPS). Dimensioning and tolerancing. Non-rigid parts |
14/30280974 DC : 0
|
BS EN ISO 4759-3 - TOLERANCES FOR FASTENERS - PART 3: WASHERS FOR BOLTS, SCREWS AND NUTS - PRODUCT GRADES A, C AND F |
BS ISO 8788:2000
|
Aerospace. Nuts, metric. Tolerances of form and position |
DIN ISO 7913:1986-05
|
AEROSPACE - FASTENERS, TOLERANCES OF FORM AND POSITION FOR BOLTS AND SCREWS |
DIN EN ISO 14638 E : 2015
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - MATRIX MODEL (ISO 14638:2015) |
BS ISO 26303:2012
|
Machine tools — Short-term capability evaluation of machining processes on metal-cutting machine tools |
BS ISO 10303-47:1997
|
Industrial automation systems and integration. Product data representation and exchange Integrated generic resource. Shape variation tolerances |
UNI EN ISO 286-1 : 2010
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ISO CODE SYSTEM FOR TOLERANCES ON LINEAR SIZES - PART 1: BASIS OF TOLERANCES, DEVIATIONS AND FITS |
BS ISO 5459:1981
|
Technical drawings. Geometrical tolerancing. Datums and datum-systems for geometrical tolerances |
BS 3934-3:1992
|
Mechanical standardization of semiconductor devices Recommendations for the preparation of outline drawings of integrated circuits |
DIN EN ISO 1660 E : 2017
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - PROFILE TOLERANCING (ISO 1660:2017) |
I.S. EN ISO 5459:2011
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - DATUMS AND DATUM SYSTEMS |
S.R. CEN ISO/TS 8062-2:2013
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES (ISO/TS 8062-2:2013, CORRECTED VERSION 2013-11-01) |
I.S. EN ISO 8015:2011
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FUNDAMENTALS - CONCEPTS, PRINCIPLES AND RULES |
UNI EN ISO 14405-2 : 2012
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 2: DIMENSIONS OTHER THAN LINEAR SIZES |
UNE-EN ISO 8015:2012
|
Geometrical product specifications (GPS) - Fundamentals - Concepts, principles and rules (ISO 8015:2011) |
I.S. EN ISO 14978:2006
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS AND REQUIREMENTS FOR GPS MEASURING EQUIPMENT |
ISO 286-1:2010
|
Geometrical product specifications (GPS) ISO code system for tolerances on linear sizes Part 1: Basis of tolerances, deviations and fits |
ISO 14405-2:2011
|
Geometrical product specifications (GPS) Dimensional tolerancing Part 2: Dimensions other than linear sizes |
UNI EN ISO 10579 : 2013
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONING AND TOLERANCING - NON-RIGID PARTS |
UNI EN ISO 5459 : 2011
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - DATUMS AND DATUM SYSTEMS |
ISO/TR 5460:1985
|
Technical drawings Geometrical tolerancing Tolerancing of form, orientation, location and run-out Verification principles and methods Guidelines |
ISO 8788:2000
|
Aerospace Nuts, metric Tolerances of form and position |
ISO 5458:1998
|
Geometrical Product Specifications (GPS) Geometrical tolerancing Positional tolerancing |
ISO 4379:1993
|
Plain bearings Copper alloy bushes |
ISO 7913:1994
|
Aerospace Bolts and screws, metric Tolerances of form and position |
DIN EN ISO 14978:2006-09
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS AND REQUIREMENTS FOR GPS MEASURING EQUIPMENT |
ISO 10135:2007
|
Geometrical product specifications (GPS) — Drawing indications for moulded parts in technical product documentation (TPD) |
IEC 61754-1:2013
|
Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 1: General and guidance |
UNE-ISO 26303:2013
|
Machine tools -- Short-term capability evaluation of machining processes on metal-cutting machine tools |
EN ISO 14978:2006/AC:2008
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS AND REQUIREMENTS FOR GPS MEASURING EQUIPMENT |
EN ISO 4759-1 : 2000
|
TOLERANCES FOR FASTENERS - PART 1: BOLTS, SCREWS, STUDS AND NUTS - PRODUCT GRADES A, B AND C |
UNI EN 20286-1 : 1995
|
ISO SYSTEM OF LIMITS AND FITS - BASES OF TOLERANCES, DEVIATIONS AND FITS |
BS EN ISO 286-1:2010
|
Geometrical product specifications (GPS). ISO code system for tolerances on linear sizes Basis of tolerances, deviations and fits |
13/30284676 DC : 0
|
BS EN ISO 1660 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - PROFILE TOLERANCING |
DIN EN ISO 10579 E : 2013
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONING AND TOLERANCING - NON-RIGID PARTS (ISO 10579:2010 INCLUDING COR 1:2011) |
DIN ISO 286-2:1990-11
|
ISO SYSTEM OF LIMITS AND FITS - TABLES OF STANDARD TOLERANCE GRADES AND LIMIT DEVIATIONS FOR HOLES AND SHAFTS |
BIS IS 800 : 2007 AMD 1 2012
|
GENERAL CONSTRUCTION IN STEEL - CODE OF PRACTICE |
DIN EN ISO 14638:2015-12
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - MATRIX MODEL (ISO 14638:2015) |
DIN ISO 10230 E : 2016
|
CYCLES - SPLINED HUB AND SPROCKET - MATING DIMENSIONS (ISO 10230:1990) |
UNI CEN ISO/TS 8062-2 : 2013
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES |
BS EN ISO 8015:2011
|
Geometrical product specifications (GPS). Fundamentals. Concepts, principles and rules |
16/30314605 DC : DRAFT MAR 2016
|
BS EN ISO 5459 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - DATUMS AND DATUM SYSTEMS |
I.S. EN ISO 286-1:2010/AC:2013
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ISO CODE SYSTEM FOR TOLERANCES ON LINEAR SIZES - PART 1: BASIS OF TOLERANCES, DEVIATIONS AND FITS (ISO 286-1:2010) |
DIN ISO 1101:1985-03
|
TECHNICAL DRAWINGS, GEOMETRICAL TOLERANCING, TOLERANCES OF FORM, ORIENTATION, LOCATION AND RUNOUT - GENERALITIES, DEFINITIONS, SYMBOLS ON DRAWINGS |
BS EN ISO 22432:2011
|
Geometrical product specifications (GPS). Features utilized in specification and verification |
BS EN ISO 14638:2015
|
Geometrical product specifications (GPS). Matrix model |
UNI EN ISO 286-2 : 2010
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ISO CODE SYSTEM FOR TOLERANCES ON LINEAR SIZES - PART 2: TABLES OF STANDARD TOLERANCE CLASSES AND LIMIT DEVIATIONS FOR HOLES AND SHAFTS |
NF EN ISO 5459 : 2011
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - DATUMS AND DATUM-SYSTEMS |
08/30163094 DC : DRAFT FEB 2008
|
BS EN ISO 286-2 AMD1 - ISO SYSTEM OF LIMITS AND FITS - PART 2: TABLES OF STANDARD TOLERANCE GRADES AND LIMIT DEVIATIONS FOR HOLES AND SHAFTS |
BS EN 60191-6:2009
|
Mechanical standardization of semiconductor devices General rules for the preparation of outline drawings of surface mounted semiconductor device packages |
DIN ISO 286-1:1990-11
|
ISO SYSTEM OF LIMITS AND FITS - BASES OF TOLERANCES, DEVIATIONS AND FITS |
UNE-EN ISO 10579:2015
|
Geometrical product specifications (GPS) - Dimensioning and tolerancing - Non-rigid parts (ISO 10579:2010 including Cor 1:2011) |
ISO 2698:2016
|
Diesel engines Clamp-mounted fuel injectors, types 7 and 28 |
ISO 8062-4:2017
|
Geometrical product specifications (GPS) — Dimensional and geometrical tolerances for moulded parts — Part 4: General tolerances for castings using profile tolerancing in a general datum system |
DIN EN ISO 286-2:2010-11
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ISO CODE SYSTEM FOR TOLERANCES ON LINEAR SIZES - PART 2: TABLES OF STANDARD TOLERANCE CLASSES AND LIMIT DEVIATIONS FOR HOLES AND SHAFTS |
CEI EN 60191-6 : 2011
|
MECHANICAL STANDARDIZATION OF SEMICONDUCTOR DEVICES - PART 6: GENERAL RULES FOR THE PREPARATION OF OUTLINE DRAWINGS OF SURFACE MOUNTED SEMICONDUCTOR DEVICE PACKAGES |
ISO 286-2:2010
|
Geometrical product specifications (GPS) ISO code system for tolerances on linear sizes Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts |
IEC 60191-6:2009
|
Mechanical standardization of semiconductor devices - Part 6: General rules for the preparation of outline drawings of surface mounted semiconductor device packages |
ISO 22432:2011
|
Geometrical product specifications (GPS) — Features utilized in specification and verification |
UNE-EN ISO 4759-3:2017
|
Tolerances for fasteners - Part 3: Washers for bolts, screws and nuts - Product grades A, C and F (ISO 4759-3:2016) |
BS EN ISO 1101:2017
|
Geometrical product specifications (GPS). Geometrical tolerancing. Tolerances of form, orientation, location and run-out |
IEC 60191-3:1999
|
Mechanical standardization of semiconductor devices - Part 3: General rules for the preparation of outline drawings of integrated circuits |
ISO 1660:2017
|
Geometrical product specifications (GPS) — Geometrical tolerancing — Profile tolerancing |
ISO 128-1:2003
|
Technical drawings General principles of presentation Part 1: Introduction and index |
ISO 5459:2011
|
Geometrical product specifications (GPS) — Geometrical tolerancing — Datums and datum systems |
ISO 14638:2015
|
Geometrical product specifications (GPS) Matrix model |
ISO 8015:2011
|
Geometrical product specifications (GPS) Fundamentals Concepts, principles and rules |
BS EN ISO 1660:2017
|
Geometrical product specifications (GPS). Geometrical tolerancing. Profile tolerancing |
ISO 4759-1:2000
|
Tolerances for fasteners — Part 1: Bolts, screws, studs and nuts — Product grades A, B and C |
ISO 4759-3:2016
|
Tolerances for fasteners Part 3: Washers for bolts, screws and nuts Product grades A, C and F |
EN 60191-3:1999
|
Mechanical standardization of semiconductor devices - Part 3: General rules for the preparation of outline drawings of integrated circuits |
EN ISO 4759-3:2016
|
Tolerances for fasteners - Part 3: Washers for bolts, screws and nuts - Product grades A, C and F (ISO 4759-3:2016) |
EN ISO 1660:2017
|
Geometrical product specifications (GPS) - Geometrical tolerancing - Profile tolerancing (ISO 1660:2017) |
EN ISO 5459:2011
|
Geometrical product specifications (GPS) - Geometrical tolerancing - Datums and datum systems (ISO 5459:2011) |
EN ISO 1101:2017
|
Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (ISO 1101:2017) |
EN ISO 8015:2011
|
Geometrical product specifications (GPS) - Fundamentals - Concepts, principles and rules (ISO 8015:2011) |
EN ISO 10579:2013
|
Geometrical product specifications (GPS) - Dimensioning and tolerancing - Non-rigid parts (ISO 10579:2010 including Cor 1:2011) |
EN ISO 286-1:2010/AC:2013
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ISO CODE SYSTEM FOR TOLERANCES ON LINEAR SIZES - PART 1: BASIS OF TOLERANCES, DEVIATIONS AND FITS (ISO 286-1:2010/COR 1:2013) |
EN ISO 22432:2011
|
Geometrical product specifications (GPS) - Features utilized in specification and verification (ISO 22432:2011) |
EN ISO 286-2:2010/AC:2013
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ISO CODE SYSTEM FOR TOLERANCES ON LINEAR SIZES - PART 2: TABLES OF STANDARD TOLERANCE CLASSES AND LIMIT DEVIATIONS FOR HOLES AND SHAFTS (ISO 286-2:2010/COR 1:2013) |
EN ISO 10303-210:2002
|
Industrial automation systems and integration - Product data representation and exchange - Part 210: Application protocol: Electronic assembly, interconnection, and packaging design (ISO 10303-210:2001) |
EN ISO 10135:2009
|
Geometrical product specifications (GPS) - Drawing indications for moulded parts in technical product documentation (TPD) (ISO 10135:2007) |
BS ISO 10579 : 2010
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONING AND TOLERANCING - NON-RIGID PARTS |
BS EN ISO 5459:2011
|
Geometrical product specifications (GPS). Geometrical tolerancing. Datums and datum systems |
12/30250038 DC : 0
|
BS ISO 2698 - DIESEL ENGINES - CLAMP-MOUNTED FUEL INJECTORS, TYPES 7 AND 28 |
DIN ISO 5458:1988-07
|
TECHNICAL DRAWINGS - GEOMETRICAL TOLERANCING - POSITIONAL TOLERANCING |
UNI EN ISO 8015 : 2011
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FUNDAMENTALS - CONCEPTS, PRINCIPLES AND RULES |
BS EN 61754-1:2013
|
Fibre optic interconnecting devices and passive components. Fibre optic connector interfaces General and guidance |
07/30167960 DC : 0
|
BS EN 60191-6 - MECHANICAL STANDARDIZATION OF SEMICONDUCTOR DEVICES - PART 6: GENERAL RULES FOR THE PREPARATION OF OUTLINE DRAWINGS OF SURFACE MOUNTED SEMICONDUCTOR DEVICE PACKAGES |
DIN CEN ISO/TS 8062-2;DIN SPEC 91184:2014-03
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES (ISO/TS 8062-2:2013) |
I.S. EN ISO 22432:2011
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FEATURES UTILIZED IN SPECIFICATION AND VERIFICATION (ISO 22432:2011) |
I.S. EN ISO 5458:1999
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - POSITIONAL TOLERANCING |
BS EN ISO 14978:2006
|
Geometrical Product Specifications (GPS). General concepts and requirements for GPS measuring equipment |
I.S. EN 61754-1:2013
|
FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CONNECTOR INTERFACES - PART 1: GENERAL AND GUIDANCE |
CEN ISO/TS 8062-2 : 2013 COR 2014
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES (ISO/TS 8062-2:2013, CORRECTED VERSION 2013-11-01) |
DIN EN ISO 4759-1 E : 2001
|
TOLERANCES FOR FASTENERS - PART 1: BOLTS, SCREWS, STUDS AND NUTS - PRODUCT GRADES A, B AND C |
BS EN ISO 4759-1:2001
|
Tolerances for fasteners Bolts, screws, studs and nuts. Product grades A, B and C |
ISO 1101:2017
|
Geometrical product specifications (GPS) — Geometrical tolerancing — Tolerances of form, orientation, location and run-out |
ISO/TS 8062-2:2013
|
Geometrical product specifications (GPS) — Dimensional and geometrical tolerances for moulded parts — Part 2: Rules |
BS EN 20286-2:1993
|
ISO system of limits and fits ISO system of limits and fits. Tables of standard tolerance grades and limit deviations for holes and shafts |
EN 60191-6:2009
|
Mechanical standardization of semiconductor devices - Part 6: General rules for the preparation of outline drawings of surface mounted semiconductor device packages |
EN 61754-1:2013
|
Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 1: General and guidance |