|
BS ISO 10073:2008
|
TOOLS FOR MOULDING - SUPPORT PILLARS |
|
BIS IS 3406-2 : 2014
|
DIMENSIONS FOR COUNTERSINKS AND COUNTERBORES - PART 2: COUNTERBORES |
|
16/30269790 DC : 0
|
BS EN ISO 5211 - INDUSTRIAL VALVES - PART-TURN ACTUATOR ATTACHMENTS |
|
DIN ISO 11900-1:2011-10
|
Tools for pressing - Ball-lock punch retainers - Part 1: Types A and B, rectangular and square for light duty (ISO 11900-1:2007) |
|
14/30304786 DC : 0
|
BS EN 15048-2 - NON-PRELOADED STRUCTURAL BOLTING ASSEMBLIES - PART 2: FITNESS FOR PURPOSE |
|
03/319369 DC : DRAFT NOV 2003
|
ISO 16047 - FASTENERS - TORQUE/CLAMP FORCE TESTING |
|
10/30199074 DC : 0
|
BS ISO 6162-1 - HYDRAULIC FLUID POWER - FLANGE CONNECTORS WITH SPLIT OR ONE-PIECE FLANGE CLAMPS AND METRIC OR INCH SCREWS - PART 1: FLANGE CONNECTORS FOR USE AT PRESSURES OF 3,5 MPA (35 BAR) TO 35 MPA (350 BAR), DN 13 TO DN 127 |
|
16/30328245 DC : 0
|
BS ISO 6164 - HYDRAULIC FLUID POWER - FOUR-SCREW, ONE-PIECE SQUARE FLANGE CONNECTIONS FOR USE AT PRESSURES OF 42 MPA, DN 10 TO 80 |
|
NF EN ISO 3661 : 2011
|
END-SUCTION CENTRIFUGAL PUMPS - BASEPLATE AND INSTALLATION DIMENSIONS |
|
BS ISO 10762:2015
|
HYDRAULIC FLUID POWER - MOUNTING DIMENSIONS FOR CYLINDERS, 10 MPA (100 BAR) SERIES |
|
04/30098195 DC : DRAFT JUL 2004
|
ISO 6020-2 - HYDRAULIC FLUID POWER - MOUNTING DIMENSIONS FOR SINGLE ROD CYLINDERS, 16 MPA (160 BAR) SERIES - PART 2: COMPACT SERIES |
|
BS ISO 3439:2003
|
SUBLAND TWIST DRILLS WITH CYLINDRICAL SHANKS FOR HOLES PRIOR TO TAPPING SCREW THREADS |
|
01/714184 DC : DRAFT OCT 2001
|
ISO/DIS 15552 - PNEUMATIC FLUID POWER - CYLINDERS WITH DETACHABLE MOUNTINGS, 1000 KPA (10 BAR) SERIES, BORES FROM 32 MM TO 320 MM - BASIC, MOUNTING AND ACCESSORIES DIMENSIONS |
|
DIN 504:2004-09
|
DRIVING COMPONENTS - EYE-TYPE BEARINGS |
|
BS ISO 6022:2006
|
Hydraulic fluid power. Mounting dimensions for single rod cylinders, 25M Pa (250 bar) series |
|
CSA C22.2 No. 60079.0 : 2015
|
EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS |
|
06/30110083 DC : 0
|
ISO 20332-1 - CRANES - PROOF OF COMPETENCE OF STEEL STRUCTURES - PART 1: GENERAL |
|
NF ISO 9270-2 : 2010
|
7/24 TAPER FOR SPINDLE NOSES FOR AUTOMATIC TOOL CHANGERS - PART 2: DIMENSIONS AND DESIGNATION OF SPINDLE NOSES OF FORMS J AND JF |
|
S.R. CEN TS 1992-4-1:2009
|
DESIGN OF FASTENINGS FOR USE IN CONCRETE - PART 4-1: GENERAL |
|
IEC 60079-0 REDLINE : 7.0
|
EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS |
|
I.S. EN ISO 16047:2005
|
FASTENERS - TORQUE/CLAMP FORCE TESTING (ISO 16047:2005) |
|
ISO 9624:1997
|
Thermoplastics pipes for fluids under pressure Mating dimensions of flange adapters and loose backing flanges |
|
BS EN 13001-3-1 : 2012
|
CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF COMPETENCE OF STEEL STRUCTURE |
|
DD CEN/TS 1992-4-1:2009
|
DESIGN OF FASTENINGS FOR USE IN CONCRETE - PART 4-1: GENERAL |
|
IEC 61241-0:2004
|
Electrical apparatus for use in the presence of combustible dust - Part 0: General requirements |
|
SAE J 2593 : 2015
|
INFORMATION REPORT FOR THE INSTALLATION OF FLUID CONDUCTORS AND CONNECTORS |
|
UNE-EN ISO 898-1:2015
|
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread (ISO 898-1:2013) |
|
BS EN ISO 15330:1999
|
FASTENERS - PRELOADING TEST FOR THE DETECTION OF HYDROGEN EMBRITTLEMENT - PARALLEL BEARING SURFACE METHOD |
|
CEN/TS 1992-4-1:2009
|
Design of fastenings for use in concrete - Part 4-1: General |
|
EN 13001-3-1:2012+A2:2018
|
Cranes - General Design - Part 3-1: Limit States and proof competence of steel structure |
|
DIN EN ISO 5210:2017-08
|
INDUSTRIAL VALVES - MULTI-TURN VALVE ACTUATOR ATTACHMENTS (ISO 5210:2017) |
|
DIN ISO 6022:2008-06
|
HYDRAULIC FLUID POWER - MOUNTING DIMENSIONS FOR SINGLE ROD CYLINDERS, 25 MPA (250 BAR) SERIES |
|
DIN EN ISO 5210:1996-05
|
INDUSTRIAL VALVES - MULTI-TURN VALVE ACTUATOR ATTACHMENTS (ISO 5210:2017) |
|
NBR IEC 60079-0 : 2013 ERRATA 2 2016
|
EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS |
|
DIN ISO 11900-3:2005-09
|
Tools for pressing - Ball-lock punch retainers - Part 3: Type E, reduced for heavy duty (ISO 11900-3:2004) |
|
DIN ISO 6022 E : 2008
|
HYDRAULIC FLUID POWER - MOUNTING DIMENSIONS FOR SINGLE ROD CYLINDERS, 25 MPA (250 BAR) SERIES |
|
DIN EN ISO 3661:2011-12
|
End-suction centrifugal pumps - Baseplate and installation dimensions (ISO 3661:1977) |
|
BS ISO 6020-1:2007
|
Hydraulic fluid power. Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series Medium series |
|
03/300201 DC : DRAFT FEB 2003
|
IEC 60079-0 ED.4.0 - ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - PART 0: GENERAL REQUIREMENTS |
|
UNE-EN 15048-2:2017
|
Non-preloaded structural bolting assemblies - Part 2: Fitness for purpose |
|
06/30151815 DC : 0
|
BS ISO 898-1 - MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 1: BOLTS, SCREWS AND STUDS |
|
13/30275387 DC : 0
|
BS ISO 20332 - CRANES - PROOF OF COMPETENCE OF STEEL STRUCTURES |
|
11/30232899 DC : 0
|
BS ISO 6162-2 - HYDRAULIC FLUID POWER - FLANGE CONNECTIONS WITH SPLIT OR ONE-PIECE FLANGE CLAMPS AND METRIC OR INCH SCREWS - PART 2: FLANGE CONNECTORS, PORTS AND MOUNTING SURFACES FOR USE AT A PRESSURE OF 42 MPA (420 BAR), DN 13 TO DN 76 |
|
BS ISO 6020-2:2015
|
HYDRAULIC FLUID POWER - MOUNTING DIMENSIONS FOR SINGLE ROD CYLINDERS, 16 MPA (160 BAR) SERIES - PART 2: COMPACT SERIES |
|
BS ISO 11900-1:2007
|
Tools for pressing. Ball-lock punch retainers Types A and B, rectangular and square for light duty |
|
BS EN ISO 3661:2010
|
End-suction centrifugal pumps. Baseplate and installation dimensions |
|
IEC 60852-3:1992
|
Outline dimensions of transformers and inductors for use in telecommunication and electronic equipment - Part 3: Transformers and inductors using YUI-1 laminations |
|
08/30184358 DC : 0
|
BS ISO 9270-1 - 7/24 TAPER SPINDLE NOSES FOR AUTOMATIC TOOL CHANGERS - PART 1: DIMENSIONS AND DESIGNATION OF SPINDLE NOSES OF FORMS S AND SF |
|
BS ISO 11900-3:2004
|
TOOLS FOR PRESSING - BALL-LOCK PUNCH RETAINERS - PART 3: TYPE E, REDUCED FOR HEAVY DUTY |
|
UNI CEN/TS 1992-4-1 : 2009
|
DESIGN OF FASTENINGS FOR USE IN CONCRETE - PART 4-1: GENERAL |
|
BS ISO 6020-3:2015
|
Hydraulic fluid power. Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series Compact series with bores from 250 mm to 500 mm |
|
ANSI B93.105M : 1987
|
HYDRAULIC FLUID POWER - SINGLE ROD CYLINDERS 160 BAR (16 MPA) MEDIUM AND 250 BAR (25 MPA) SERIES - TOLERANCES, |
|
SAE J 2551/3 : 2013
|
RECOMMENDED PRACTICES FOR FLUID CONDUCTOR CARBON, ALLOY AND HIGH STRENGTH LOW ALLOY STEEL TUBING APPLICATIONS - PART 3: PROCUREMENT |
|
I.S. EN 13001-3-1:2012
|
CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF COMPETENCE OF STEEL STRUCTURE |
|
SAE J 2551 : 2013
|
RECOMMENDED PRACTICES FOR FLUID CONDUCTOR CARBON AND ALLOY STEEL TUBING APPLICATIONS |
|
I.S. EN ISO 3661:2010
|
END-SUCTION CENTRIFUGAL PUMPS - BASEPLATE AND INSTALLATION DIMENSIONS |
|
BS EN 60079-0 : 2012
|
EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS |
|
ISO 1609:1986
|
Vacuum technology Flange dimensions |
|
ISO 6164:1994
|
Hydraulic fluid power Four-screw, one-piece square-flange connections for use at pressures of 25 MPa and 40 MPa (250 bar and 400 bar) |
|
SAE J 518/3 : 2015
|
HYDRAULIC FLANGE CLAMPS, 2-SCREW FLANGE CONNECTION TO BE USED WITH SAE J518-1, (CODE 61) CONNECTIONS WHERE ONLY LOW PRESSURE IS REQUIRED |
|
DIN EN ISO 898-1:2013-05
|
MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 1: BOLTS, SCREWS AND STUDS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-1:2013) |
|
DIN EN ISO 887 E : 2006
|
PLAIN WASHERS FOR METRIC BOLTS, SCREWS AND NUTS FOR GENERAL PURPOSES - GENERAL PLAN |
|
09/30206527 DC : 0
|
BS EN 60079-0 ED 6.0 - EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS |
|
BIS IS/IEC 60079-0 : 2011
|
EXPLOSIVE ATMOSPHERES - PART 0: GENERAL REQUIREMENTS |
|
DIN 74:2003-04
|
COUNTERSINKS FOR COUNTERSUNK HEAD SCREWS EXCEPT COUNTERSUNK HEAD SCREWS (EXCEPT SCREWS WITH DIN EN 27721 HEAD) |
|
I.S. EN ISO 5210:2017
|
INDUSTRIAL VALVES - MULTI-TURN VALVE ACTUATOR ATTACHMENTS (ISO 5210:2017) |
|
I.S. EN ISO 2320:2015
|
FASTENERS - PREVAILING TORQUE STEEL NUTS - FUNCTIONAL PROPERTIES (ISO 2320:2015) |
|
I.S. EN ISO 5211:2017
|
INDUSTRIAL VALVES - PART-TURN ACTUATOR ATTACHMENTS (ISO 5211:2017) |
|
I.S. EN ISO 898-1:2013
|
MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 1: BOLTS, SCREWS AND STUDS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-1:2013) |
|
DIN EN 23661:1994-08
|
END-SUCTION CENTRIFUGAL PUMPS - BASEPLATE AND INSTALLATION DIMENSIONS |
|
I.S. EN 15048-2:2016
|
NON-PRELOADED STRUCTURAL BOLTING ASSEMBLIES - PART 2: FITNESS FOR PURPOSE |
|
DIN 974-2:1991-05
|
DIAMETERS OF COUNTERBORES (HOLES) FOR HEXAGON BOLTS AND NUTS |
|
ISA 61241-0 : 2006
|
ELECTRICAL APPARATUS FOR USE IN ZONE 20, ZONE 21 AND ZONE 22 HAZARDOUS (CLASSIFIED) LOCATIONS - GENERAL REQUIREMENTS |
|
VDI 2230 Blatt 1:2003-02
|
Systematic calculation of high duty bolted joints - Joints with one cylindrical bolt |
|
VDI/VDE 2251 Blatt 1.1:2016-02
|
Bolted joints - Tensioned joints - Precision engineering components |
|
VDI/VDE 3845 Blatt 1:2010-09
|
Industrial process control - Pneumatic control valves - Interfaces of valves and auxiliary equipment |
|
DIN 503:2004-09
|
Driving components - Flange bearings - Fastened with four screws |
|
DIN ISO 10073:2010-05
|
Tools for moulding - Support pillars (ISO 10073:2008) |
|
BS ISO 11900-2:2008
|
Tools for pressing. Ball-lock punch retainers Types C and D, reduced for light duty |
|
SAE J 2551/1 : 2013
|
RECOMMENDED PRACTICES FOR FLUID CONDUCTOR CARBON, ALLOY AND HIGH STRENGTH LOW ALLOY STEEL TUBING APPLICATIONS - PART 1: DESIGN AND FABRICATION |
|
16/30269173 DC : 0
|
BS EN ISO 5210 - INDUSTRIAL VALVES - MULTI-TURN VALVE ACTUATOR ATTACHMENTS |
|
BS ISO 6162-1:2012
|
HYDRAULIC FLUID POWER - FLANGE CONNECTIONS WITH SPLIT OR ONE-PIECE FLANGE CLAMPS AND METRIC OR INCH SCREWS - PART 1: FLANGE CONNECTORS, PORTS AND MOUNTING SURFACES FOR USE AT PRESSURES OF 3,5 MPA (35 BAR) TO 35 MPA (350 BAR), DN 13 TO DN 127 |
|
13/30274177 DC : 0
|
BS ISO 10762 - HYDRAULIC FLUID POWER - MOUNTING DIMENSIONS FOR CYLINDERS, 10 MPA (100 BAR) SERIES |
|
BS EN 60852-4:1997
|
OUTLINE DIMENSIONS OF TRANSFORMERS AND INDUCTORS FOR USE IN TELECOMMUNICATION AND ELECTRONIC EQUIPMENT - PART 4: TRANSFORMERS AND INDUCTORS USING YUI-2 LAMINATIONS |
|
ISO 3439:2003
|
Subland twist drills with cylindrical shanks for holes prior to tapping screw threads |
|
BS 7796:1995
|
SPECIFICATION FOR HYDRAULIC FLUID POWER - FOUR-SCREW SPLIT-FLANGE CONNECTIONS FOR USE AT PRESSURES OF 2,5 MPA TO 40 MPA (25 BAR TO 400 BAR) - TYPE 1 METRIC SERIES AND TYPE 2 INCH SERIES |
|
04/30124417 DC : DRAFT OCT 2004
|
EN 15081 - INDUSTRIAL VALVES - MOUNTING KITS FOR PART-TURN VALVE ACTUATOR ATTACHMENT |
|
ISO 6022:2006
|
Hydraulic fluid power — Mounting dimensions for single rod cylinders, 25 MPa (250 bar) series |
|
UNI EN 13001-3-1 : 2013
|
CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF COMPETENCE OF STEEL STRUCTURE |
|
DIN EN 13001-3-1:2013-12
|
CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF COMPETENCE OF STEEL STRUCTURE |
|
SAE J 2551/2 : 2013
|
RECOMMENDED PRACTICES FOR FLUID CONDUCTOR CARBON, ALLOY AND HIGH STRENGTH LOW ALLOY STEEL TUBING APPLICATIONS - PART 2: GENERAL SPECIFICATIONS AND PERFORMANCE REQUIREMENTS |
|
ISO 3800:1993
|
Threaded fasteners — Axial load fatigue testing — Test methods and evaluation of results |
|
ISO 11900-3:2004
|
Tools for pressing Ball-lock punch retainers Part 3: Type E, reduced for heavy duty |
|
BS ISO 20332:2016
|
Cranes. Proof of competence of steel structures |
|
CSA E60079.0 : 2002
|
ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - GENERAL REQUIREMENTS |
|
ISO 6162-2:2018
|
Hydraulic fluid power — Flange connections with split or one-piece flange clamps and metric or inch screws — Part 2: Flange connectors, ports and mounting surfaces for use at a pressure of 42 MPa (420 bar), DN 13 to DN 76 |
|
SAE J 518/2 : 2017
|
HYDRAULIC FLANGED TUBE, PIPE, AND HOSE CONNECTIONS, 4-SCREW FLANGE CONNECTION - PART 2: 42 MPA (CODE 62) |
|
ISO 6020-3:2015
|
Hydraulic fluid power — Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series — Part 3: Compact series with bores from 250 mm to 500 mm |
|
ISO 15552:2018
|
Pneumatic fluid power — Cylinders with detachable mountings, 1 000 kPa (10 bar) series, bores from 32 mm to 320 mm — Basic, mounting and accessories dimensions |
|
ISO 16656:2016
|
Hydraulic fluid power Single rod, short-stroke cylinders with bores from 32 mm to 100 mm for use at 10 MPa (100 bar) Mounting dimensions |
|
ISO 9270-1:2010
|
7/24 taper spindle noses for automatic tool changers Part 1: Dimensions and designation of spindle noses of forms S and SF |
|
ISO 11900-2:2008
|
Tools for pressing — Ball-lock punch retainers — Part 2: Types C and D, reduced for light duty |
|
ISO 6020-2:2015
|
Hydraulic fluid power Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series Part 2: Compact series |
|
ISO 9271:1992
|
Decontamination of radioactively contaminated surfaces — Testing of decontamination agents for textiles |
|
DIN EN 14831 E : 2005
|
FASTENERS - TIGHTENING PERFORMANCE - TORQUE/ANGLE SIMPLIFIED TEST METHOD |
|
DIN EN 15081 E : 2008
|
INDUSTRIAL VALVES - MOUNTING KITS FOR PART-TURN VALVE ACTUATOR ATTACHMENT |
|
UNE-EN ISO 2320:2017
|
Fasteners - Prevailing torque steel nuts - Functional properties (ISO 2320:2015) |
|
BS EN ISO 898-1:2013
|
Mechanical properties of fasteners made of carbon steel and alloy steel Bolts, screws and studs with specified property classes. Coarse thread and fine pitch thread |
|
ISO 5210:2017
|
Industrial valves — Multi-turn valve actuator attachments |
|
EN ISO 5211:2017
|
Industrial valves - Part-turn actuator attachments (ISO 5211:2017) |
|
UNI EN 14831 : 2005
|
FASTENERS - TIGHTENING PERFORMANCE - TORQUE/ANGLE SIMPLIFIED TEST METHOD |
|
UNI EN ISO 898-1 : 2013
|
MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 1: BOLTS, SCREWS AND STUDS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD |
|
ISO 20332:2016
|
Cranes Proof of competence of steel structures |
|
BS 7564-10:1993
|
TOOLS FOR MOULDING - SPECIFICATION FOR DIMENSIONS OF SUPPORT PILLARS |
|
08/30184361 DC : 0
|
BS ISO 9270-2 - 7/24 TAPERS FOR SPINDLE NOSES FOR AUTOMATIC TOOL CHANGERS - PART 2 - DIMENSIONS AND DESIGNATION OF SPINDLE NOSES OF FORMS J AND JF |
|
I.S. EN 60079-0:2012
|
EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS (IEC 60079-0:2011 (MOD)) |
|
14/30298880 DC : 0
|
BS EN ISO 2320 - FASTENERS - PREVAILING TORQUE TYPE STEEL NUTS - MECHANICAL AND PERFORMANCE PROPERTIES |
|
14/30274168 DC : 0
|
BS ISO 6020-3 - HYDRAULIC FLUID POWER - MOUNTING DIMENSIONS FOR SINGLE ROD CYLINDERS, 16 MPA (160 BAR) SERIES - PART 3: COMPACT SERIES WITH BORES FROM 250 MM TO 500 MM |
|
08/30181655 DC : DRAFT SEP 2008
|
BS EN 13001-3-1 - CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF OF COMPETENCE OF STEEL STRUCTURES |
|
UNI EN ISO 3661 : 2011
|
END-SUCTION CENTRIFUGAL PUMPS - BASEPLATE AND INSTALLATION DIMENSIONS |
|
DIN ISO 11900-2:2011-10
|
Tools for pressing - Ball-lock punch retainers - Part 2: Types C and D, reduced for light duty (ISO 11900-2:2008) |
|
03/308658 DC : DRAFT MAY 2003
|
EN ISO 15065 - COUNTERSINKS FOR COUNTERSUNK HEAD SCREWS WITH HEAD CONFIGURATION IN ACCORDANCE WITH ISO 7721 |
|
DIN 24550-5:1992-08
|
FLUID POWER - HYDRAULIC FILTERS - TANK TOP RETURN-LINE FILTER FITTING DIMENSIONS |
|
BIS IS 1367-8 : 2014
|
TECHNICAL SUPPLY CONDITIONS FOR THREADED STEEL FASTENERS - PART 8: PREVAILING TORQUE TYPE STEEL NUTS - MECHANICAL AND PERFORMANCE PROPERTIES |
|
DIN EN ISO 3661 E : 2011
|
END-SUCTION CENTRIFUGAL PUMPS - BASEPLATE AND INSTALLATION DIMENSIONS (ISO 3661:1977) |
|
02/713150 DC : DRAFT NOV 2002
|
ISO 11900-3 - TOOLS FOR PRESSING - BALL-LOCK PUNCH RETAINERS - PART 3: TYPE E, REDUCED FOR HEAVY DUTY |
|
BS EN 61241-0:2006 (published 2007-01)
|
Electrical apparatus for use in the presence of combustible dust General requirements |
|
DIN ISO 6020-1:2010-07
|
Hydraulic fluid power - Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series - Part 1: Medium series (ISO 6020-1:2007) |
|
NF ISO 9270-1 : 2010
|
7/24 TAPER SPINDLE NOSES FOR AUTOMATIC TOOL CHANGERS - PART 1: DIMENSIONS AND DESIGNATION OF SPINDLE NOSES OF FORMS S AND SF |
|
SAE J 518/1 : 2013
|
HYDRAULIC FLANGED TUBE, PIPE, AND HOSE CONNECTIONS, 4-SCREW FLANGE CONNECTION - PART 1: 3.5 MPA TO 35 MPA (CODE 61) |
|
IEC 60079-0:2017
|
Explosive atmospheres - Part 0: Equipment - General requirements |
|
PREN 15048-2 : DRAFT 2014
|
NON-PRELOADED STRUCTURAL BOLTING ASSEMBLIES - PART 2: FITNESS FOR PURPOSE |
|
ISO 6020-1:2007
|
Hydraulic fluid power — Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series — Part 1: Medium series |
|
UNI EN ISO 16047 : 2012
|
FASTENERS - TORQUE/CLAMP FORCE TESTING |
|
ISO 9270-2:2010
|
7/24 taper spindle noses for automatic tool changers Part 2: Dimensions and designation of spindle noses of forms J and JF |
|
ISO 11900-1:2007
|
Tools for pressing Ball-lock punch retainers Part 1: Types A and B, rectangular and square for light duty |
|
ISO 6162-1:2012
|
Hydraulic fluid power — Flange connections with split or one-piece flange clamps and metric or inch screws — Part 1: Flange connectors, ports and mounting surfaces for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127 |
|
I.S. EN 61241-0:2006
|
ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 0: GENERAL REQUIREMENTS |
|
DIN EN ISO 2320:2016-05
|
FASTENERS - PREVAILING TORQUE STEEL NUTS - FUNCTIONAL PROPERTIES (ISO 2320:2015) |
|
DIN EN 15048-2:2016-09
|
NON-PRELOADED STRUCTURAL BOLTING ASSEMBLIES - PART 2: FITNESS FOR PURPOSE |
|
BS EN ISO 887:2000
|
Plain washers for metric bolts, screws and nuts for general purposes. General plan |
|
ISO 5211:2017
|
Industrial valves — Part-turn actuator attachments |
|
ISO 2320:2015
|
Fasteners Prevailing torque steel nuts Functional properties |
|
BS EN ISO 15065:2005
|
Countersinks for countersunk head screws with head configuration in accordance with ISO 7721 |
|
BS EN ISO 5210:2017
|
Industrial valves. Multi-turn valve actuator attachments |
|
ISO 898-1:2013
|
Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread |
|
UNE-EN 60079-0:2013
|
Explosive atmospheres - Part 0: Equipment - General requirements |
|
BS EN 15048-2:2007
|
NON-PRELOADED STRUCTURAL BOLTING ASSEMBLIES - PART 2: FITNESS FOR PURPOSE |
|
IEC 60852-4:1996
|
Outline dimensions of transformers and inductors for use in telecommunication and electronic equipment - Part 4: Transformers and inductors using YUI-2 laminations |
|
ISO 15330:1999
|
Fasteners — Preloading test for the detection of hydrogen embrittlement — Parallel bearing surface method |
|
05/30134569 DC : DRAFT JUN 2005
|
IEC 60079-0. ED. 5.0 - ELECTRICAL APPARATUS FOR EXPLOSIVE ATMOSPHERES - PART 0: GENERAL REQUIREMENTS |
|
ISO 887:2000
|
Plain washers for metric bolts, screws and nuts for general purposes General plan |
|
BS EN ISO 2320:2015
|
Fasteners. Prevailing torque steel nuts. Functional properties |
|
BS EN 14831:2005
|
FASTENERS - TIGHTENING PERFORMANCE - TORQUE/ANGLE SIMPLIFIED TEST METHOD |
|
EN 15081:2007
|
Industrial valves - Mounting kits for part-turn valve actuator attachment |
|
EN ISO 898-1:2013
|
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread (ISO 898-1:2013) |
|
EN ISO 15330 : 1999
|
FASTENERS - PRELOADING TEST FOR THE DETECTION OF HYDROGEN EMBRITTLEMENT - PARALLEL BEARING SURFACE METHOD (ISO 15330:1999) |
|
EN ISO 887:2000/AC:2006
|
PLAIN WASHERS FOR METRIC BOLTS, SCREWS AND NUTS FOR GENERAL PURPOSES - GENERAL PLAN (ISO 887:2000) |
|
EN 15048-2:2016
|
Non-preloaded structural bolting assemblies - Part 2: Fitness for purpose |
|
EN ISO 5210:2017
|
Industrial valves - Multi-turn valve actuator attachments (ISO 5210:2017) |
|
EN ISO 15065:2005
|
Countersinks for countersunk head screws with head configuration in accordance with ISO 7721 (ISO 15065:2005) |
|
EN ISO 3661:2010
|
End-suction centrifugal pumps - Baseplate and installation dimensions (ISO 3661:1977) |
|
EN ISO 2320:2015
|
Fasteners - Prevailing torque steel nuts - Functional properties (ISO 2320:2015) |
|
EN ISO 16047:2005/A1:2012
|
FASTENERS - TORQUE/CLAMP FORCE TESTING (ISO 16047:2005/AMD 1:2012) |
|
EN 14831:2005
|
Fasteners - Tightening performance - Torque/Angle simplified test method |
|
04/30098199 DC : DRAFT JUL 2004
|
ISO 6022 - HYDRAULIC FLUID POWER - MOUNTING DIMENSIONS FOR SINGLE ROD CYLINDERS, 25 MPA (250 BAR) SERIES |
|
ISO 10762:2015
|
Hydraulic fluid power Mounting dimensions for cylinders, 10 MPa (100 bar) series |
|
14/30284271 DC : 0
|
BS ISO 6020-2 - HYDRAULIC FLUID POWER - MOUNTING DIMENSIONS FOR SINGLE ROD CYLINDERS, 16 MPA (160 BAR) SERIES - PART 2: COMPACT SERIES |
|
IS 1367 : Part 3 : 2017
|
TECHNICAL SUPPLY CONDITIONS FOR THREADED STEEL FASTENERS - PART 3: MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND BOLTS, SCREWS AND STUDS |
|
UNE-EN ISO 3661:2011
|
End-suction centrifugal pumps - Baseplate and installation dimensions (ISO 3661:1977) |
|
BS ISO 16656:2004
|
HYDRAULIC FLUID POWER - SINGLE ROD, SHORT-STROKE CYLINDERS WITH BORES FROM 32 MM TO 100 MM FOR USE AT 10 MPA (100 BAR) - MOUNTING DIMENSIONS |
|
DIN ISO 6162-1:2006-02
|
HYDRAULIC FLUID POWER - FLANGE CONNECTORS WITH SPLIT OR ONE-PIECE FLANGE CLAMPS AND METRIC OR INCH SCREWS - PART 1: FLANGE CONNECTORS FOR USE AT PRESSURES OF 3,5 MPA (35 BAR) TO 35 MPA (350 BAR), DN 13 TO DN 127 |
|
DIN 502:2004-09
|
Driving Components - Flange bearings - Fastened with two screws |
|
ISO 16047:2005
|
Fasteners — Torque/clamp force testing |
|
BS ISO 15552:2004
|
PNEUMATIC FLUID POWER - CYLINDERS WITH DETACHABLE MOUNTINGS, 1000 KPA (10 BAR) SERIES, BORES FROM 32 MM TO 320 MM - BASIC, MOUNTING AND ACCESSORIES DIMENSIONS |
|
DIN ISO 6162-2:2006-02
|
HYDRAULIC FLUID POWER - FLANGE CONNECTORS WITH SPLIT OR ONE-PIECE FLANGE CLAMPS AND METRIC OR INCH SCREWS - PART 2: FLANGE CONNECTORS FOR USE AT PRESSURES OF 35 MPA (350 BAR) TO 40 MPA (400 BAR), DN 13 TO DN 51 |
|
BS EN ISO 16047 : 2005
|
FASTENERS - TORQUE/CLAMP FORCE TESTING |
|
XP CEN/TS 1992-4-1 : 2009 XP
|
DESIGN FOR FASTENINGS FOR USE IN CONCRETE - PART 4-1: GENERAL |
|
ISO 10073:2008
|
Tools for moulding — Support pillars |
|
ISO 6162:1994
|
Hydraulic fluid power Four-screw split-flange connections for use at pressures of 2,5 MPa to 40 MPa (25 bar to 400 bar) Type I metric series and type II inch series |
|
ISO 15065:2005
|
Countersinks for countersunk head screws with head configuration in accordance with ISO 7721 |
|
BS EN ISO 5211:2017
|
Industrial valves. Part-turn actuator attachments |
|
ISO 3661:1977
|
End-suction centrifugal pumps — Baseplate and installation dimensions |
|
BS EN 15081:2007
|
Industrial valves. Mounting kits for part-turn valve actuator attachment |
|
IEC 60079-0:2017 RLV
|
Explosive atmospheres - Part 0: Equipment - General requirements |
|
EN 60079-0:2012/A11:2013
|
EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS (IEC 60079-0:2011, MODIFIED) |
|
DIN EN 14831:2005-07
|
Fasteners - Tightening performance - Torque/Angle simplified test method |
|
DIN EN ISO 15065:2005-05
|
Countersinks for countersunk head screws with head configuration in accordance with ISO 7721 (ISO 15065:2005) |
|
DIN EN 15081:2008-03
|
Industrial valves - Mounting kits for part-turn valve actuator attachment |
|
DIN EN ISO 16047:2013-01
|
FASTENERS - TORQUE/CLAMP FORCE TESTING (ISO 16047:2005 + AMD 1:2012) |
|
EN 60852-4:1996
|
Outline dimensions of transformers and inductors for use in telecommunication and electronic equipment - Part 4: Transformers and inductors using YUI-2 laminations |
|
DIN EN ISO 887:2006-07
|
Plain washers for metric bolts, screws and nuts for general purposes - General plan (ISO 887:2000 + Cor. 1:2006) |
|
EN 61241-0:2006
|
Electrical apparatus for use in the presence of combustible dust - Part 0: General requirements |