I.S. EN 4710-03:2015
|
AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL APPLICATIONS - PART 03: SPRING CLAMP |
I.S. EN 14420-4:2013
|
HOSE FITTINGS WITH CLAMP UNITS - PART 4: FLANGE CONNECTIONS |
I.S. EN 14420-7:2013
|
HOSE FITTINGS WITH CLAMP UNITS - PART 7: CAM LOCKING COUPLINGS |
I.S. EN 14420-8:2013
|
HOSE FITTINGS WITH CLAMP UNITS - PART 8: SYMMETRICAL HALF COUPLING (GUILLEMIN SYSTEM) |
I.S. EN ISO 3964:2016
|
DENTISTRY - COUPLING DIMENSIONS FOR HANDPIECE CONNECTORS (ISO 3964:2016) |
ISO 2768-1:1989
|
General tolerances — Part 1: Tolerances for linear and angular dimensions without individual tolerance indications |
DIN ISO 2768-1:1991-06
|
GENERAL TOLERANCES - TOLERANCES FOR LINEAR AND ANGULAR DIMENSIONS WITHOUT INDIVIDUAL TOLERANCE INDICATIONS |
I.S. EN 60987:2015
|
NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL IMPORTANT TO SAFETY - HARDWARE DESIGN REQUIREMENTS FOR COMPUTER-BASED SYSTEMS |
DIN EN 15340:2007-06
|
Thermal spraying - Determination of shear load resistance of thermally sprayed coatings |
ISO 3937-2:2008
|
Cutter arbors with tenon drive — Part 2: Dimensions of 7/24 taper |
ISO 17447-2:2015
|
Road Vehicles Glow-plugs with conical seating and their cylinder head housing Part 2: Basic characteristics and dimensions for ceramic-sheath-type glow-plugs |
ISO 10889-3:2016
|
Tool holders with cylindrical shank Part 3: Type B with rectangular radial seat |
DIN EN ISO 8362-7:2011-03
|
Injection containers and accessories - Part 7: Injection caps made of aluminium-plastics combinations without overlapping plastics part (ISO 8362-7:2006) |
ISO 8132:2014
|
Hydraulic fluid power Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250 bar) series |
ISO 26623-2:2014
|
Polygonal taper interface with flange contact surface Part 2: Dimensions and designation of receivers |
ISO 10889-5:2016
|
Tool holders with cylindrical shank Part 5: Type D with more than one rectangular seat |
DIN ISO 7388-3:2015-03
|
TOOL SHANKS WITH 7/24 TAPER FOR AUTOMATIC TOOL CHANGERS - PART 3: RETENTION KNOBS FOR SHANKS OF FORMS AC, AD, AF, UC, UD, UF, JD AND JF (ISO 7388-3:2013) |
ISO 3860:2011
|
Bore cutters with key drive — Form milling cutters with constant profile |
ISO 6550-4:2014
|
Road vehicles Sheath-type glow-plugs with conical seating and their cylinder head housing Part 4: M8 x 1 glow-plugs |
DIN ISO 10889-2:2006-01
|
TOOL HOLDERS WITH CYLINDRICAL SHANK - PART 2: TYPE A, SHANKS FOR TOOL HOLDERS OF SPECIAL DESIGNS |
ISO 7206-12:2016
|
Implants for surgery — Partial and total hip joint prostheses — Part 12: Deformation test method for acetabular shells |
ISO 9270-2:2010
|
7/24 taper spindle noses for automatic tool changers Part 2: Dimensions and designation of spindle noses of forms J and JF |
BS EN 4710-03:2015
|
Aerospace series. Quick release fastening systems for non-structural applications Spring clamp |
DIN EN ISO 8536-3:2009-09
|
Infusion equipment for medical use - Part 3: Aluminium caps for infusion bottles (ISO 8536-3:2009) |
DIN ISO 10889-3:2006-01
|
TOOL HOLDERS WITH CYLINDRICAL SHANK - PART 3: TYPE B WITH RECTANGULAR RADIAL SEAT |
DIN ISO 7388-1:2014-07
|
TOOL SHANKS WITH 7/24 TAPER FOR AUTOMATIC TOOL CHANGERS - PART 1: DIMENSIONS AND DESIGNATION OF SHANKS OF FORMS A, AD, AF, U, UD AND UF (ISO 7388-1:2007) |
ISO 10889-4:2016
|
Tool holders with cylindrical shank Part 4: Type C with rectangular axial seat |
DIN EN 14420-8:2016-06
|
HOSE FITTINGS WITH CLAMP UNITS - PART 8: SYMMETRICAL HALF COUPLING (GUILLEMIN SYSTEM) |
ISO 10649-6:2012
|
Cutter arbors with parallel key and tenon drive — Part 6: Dimensions and designation of tool holders with modular taper interface with ball track system |
BS ISO 17447-1:2015
|
Road Vehicles. Glow-plugs with conical seating and their cylinder head housing Basic characteristics and dimensions for metal-sheath-type glow-plugs |
DIN EN 14420-4:2013-09
|
Hose fittings with clamp units - Part 4: Flange connections |
DIN 28115:2003-02
|
CARBON STEEL NOZZLES - PN 10 TO PN 40 |
DIN EN 14420-5:2013-09
|
HOSE FITTINGS WITH CLAMP UNITS - PART 5: THREADED CONNECTIONS |
BS EN ISO 3964:2016
|
Dentistry. Coupling dimensions for handpiece connectors |
BS ISO 5145:2017
|
Gas cylinders. Cylinder valve outlets for gases and gas mixtures. Selection and dimensioning |
BS EN 50180-3 : 2015
|
BUSHINGS ABOVE 1 KV UP TO 52 KV AND FROM 250 A TO 3,15 KA FOR LIQUID FILLED TRANSFORMERS - PART 3: REQUIREMENTS FOR BUSHING FIXATIONS |
BS EN 14420-8 : 2013
|
HOSE FITTINGS WITH CLAMP UNITS - PART 8: SYMMETRICAL HALF COUPLING (GUILLEMIN SYSTEM) |
EN 13261:2009+A1:2010
|
Railway applications - Wheelsets and bogies - Axles - Product requirements |
EN 12881-1:2014
|
Conveyor belts - Fire simulation flammability testing - Part 1: Propane burner tests |
BS EN ISO 8936:2017
|
Awnings for leisure accommodation vehicles. Requirements and test methods |
DIN ISO 26622-2:2013-10
|
MODULAR TAPER INTERFACE WITH BALL TRACK SYSTEM - PART 2: DIMENSIONS AND DESIGNATION OF RECEIVERS (ISO 26622-2:2008) |
DIN ISO 10889-6:2006-01
|
TOOL HOLDERS WITH CYLINDRICAL SHANK - PART 6: TYPE E WITH CYLINDRICAL SEAT |
BS EN 16313:2013
|
Connections for heating and cooling appliances. Detachable connection with outside threaded pipe G ¾ A and inside cone |
BS EN 50216-12:2011
|
Power transformer and reactor fittings Fans |
BS EN 14420-3:2013
|
Hose fittings with clamp units Clamp units, bolted or pinned |
PREN 3624 : 200P1
|
AEROSPACE SERIES - POLYSULPHIDE SEALANTS, TWO-COMPONENT - TECHNICAL SPECIFICATION |
BS EN 14420-5:2013
|
Hose fittings with clamp units Threaded connections |
PREN 3101 : 200P1
|
AEROSPACE SERIES - NON-METALLIC MATERIALS - SEALANTS - TEST METHOD - DETERMINATION OF RESISTANCE TO THERMAL RUPTURE |
BS EN 14420-6:2013
|
Hose fittings with clamp units TW tank truck couplings |
ONORM EN ISO 8536-3 : 2009
|
INFUSION EQUIPMENT FOR MEDICAL USE - PART 3: ALUMINIUM CAPS FOR INFUSION BOTTLES |
BS ISO 10649-1:2013
|
Cutter arbors with parallel key and tenon drive General dimensions |
BS ISO 10649-3:2013
|
Cutter arbors with parallel key and tenon drive Dimensions and designation of tool holders with 7/24 taper for automatic tool changer |
BS ISO 10649-2:2013
|
Cutter arbors with parallel key and tenon drive Dimensions and designation of tool holders with taper interface with flange contact surface |
PREN 2824 : 200P1
|
AEROSPACE SERIES - BURNING BEHAVIOUR OF NON METALLIC MATERIALS UNDER THE INFLUENCE OF RADIATING HEAT AND FLAMES - DETERMINATION OF SMOKE DENSITY AND GAS COMPONENTS IN THE SMOKE OF MATERIALS - TEST EQUIPMENT, APPARATUS AND MEDIA |
I.S. EN 14420-3:2013
|
HOSE FITTINGS WITH CLAMP UNITS - PART 3: CLAMP UNITS, BOLTED OR PINNED |
UNE-EN 14420-7:2014
|
Hose fittings with clamp units - Part 7: Cam locking couplings |
ISO 5459:2011
|
Geometrical product specifications (GPS) — Geometrical tolerancing — Datums and datum systems |
EN 60987:2015
|
Nuclear power plants - Instrumentation and control important to safety - Hardware design requirements for computer-based systems |
I.S. EN 4694:2017
|
AEROSPACE SERIES - TIE ROD WITH INTEGRATED BOLTS - ASSEMBLY CODE D, E AND F |
NF ISO 128-1 : 2003
|
TECHNICAL DRAWINGS - GENERAL PRINCIPLES OF PRESENTATION - PART 1: INTRODUCTION AND INDEX |
ISO 17447-1:2015
|
Road Vehicles Glow-plugs with conical seating and their cylinder head housing Part 1: Basic characteristics and dimensions for metal-sheath-type glow-plugs |
ISO 11687-1:1995
|
Plain bearings Pedestal plain bearings Part 1: Pillow blocks |
ISO 10889-7:2016
|
Tool holders with cylindrical shank Part 7: Type F with taper seat |
DIN EN 16313:2013-08
|
Connections for heating and cooling appliances - Detachable connection with outside threaded pipe G 3/4 A and inside cone |
ISO 5145:2017
|
Gas cylinders — Cylinder valve outlets for gases and gas mixtures — Selection and dimensioning |
ISO 128-1:2003
|
Technical drawings General principles of presentation Part 1: Introduction and index |
ISO 10889-2:2016
|
Tool holders with cylindrical shank Part 2: Type A, shanks for tool holders of special designs |
ISO 26623-1:2014
|
Polygonal taper interface with flange contact surface Part 1: Dimensions and designation of shanks |
DIN EN 13261:2011-01
|
RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - AXLES - PRODUCT REQUIREMENTS |
ISO/TR 18569:2004
|
Safety of machinery Guidelines for the understanding and use of safety of machinery standards |
DIN EN 14420-6:2013-09
|
Hose fittings with clamp units - Part 6: TW tank truck couplings |
ISO 10889-6:2016
|
Tool holders with cylindrical shank Part 6: Type E with cylindrical seat |
ISO 7388-3:2016
|
Tool shanks with 7/24 taper for automatic tool changers Part 3: Retention knobs of forms AD, AF, UD, UF, JD and JF |
ISO 7388-2:2007
|
Tool shanks with 7/24 taper for automatic tool changers — Part 2: Dimensions and designation of shanks of forms J, JD and JF |
ISO 8362-7:2006
|
Injection containers and accessories Part 7: Injection caps made of aluminium-plastics combinations without overlapping plastics part |
ISO 7388-1:2007
|
Tool shanks with 7/24 taper for automatic tool changers Part 1: Dimensions and designation of shanks of forms A, AD, AF, U, UD and UF |
ISO 10649-1:2013
|
Cutter arbors with parallel key and tenon drive — Part 1: General dimensions |
ISO 8133:2014
|
Hydraulic fluid power Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) compact series |
DIN EN 12881-1:2015-10
|
Conveyor belts - Fire simulation flammability testing - Part 1: Propane burner tests |
ISO 10649-3:2013
|
Cutter arbors with parallel key and tenon drive — Part 3: Dimensions and designation of tool holders with 7/24 taper for automatic tool changer |
ISO 1641-2:2011
|
End mills and slot drills Part 2: Dimensions and designation of milling cutters with Morse taper shanks |
ISO 8936:2017
|
Awnings for leisure accommodation vehicles — Requirements and test methods |
ISO 11687-2:1995
|
Plain bearings Pedestal plain bearings Part 2: Side flange bearings |
ISO 10649-2:2013
|
Cutter arbors with parallel key and tenon drive — Part 2: Dimensions and designation of tool holders with taper interface with flange contact surface |
ISO/TR 17209:2013
|
Hydraulic fluid power Two-, three- and four-port screw-in cartridge valves Cavities with ISO 725 (UN and UNF) threads |
ISO 8362-6:2010
|
Injection containers and accessories Part 6: Caps made of aluminium-plastics combinations for injection vials |
ISO 9270-1:2010
|
7/24 taper spindle noses for automatic tool changers Part 1: Dimensions and designation of spindle noses of forms S and SF |
ISO 3937-1:2008
|
Cutter arbors with tenon drive — Part 1: Dimensions of Morse taper |
ISO 10649-4:2013
|
Cutter arbors with parallel key and tenon drive — Part 4: Dimensions and designation of tool holders with 7/24 taper without automatic tool changer |
ISO 10643:2009
|
Dimensions of accessories for cutter arbors with parallel key and tenon drive |
BIS IS/ISO 7388-1 : 2007
|
TOOL SHANKS WITH 7/24 TAPER FOR AUTOMATIC TOOL CHANGERS - PART 1: DIMENSIONS AND DESIGNATION OF SHANKS OF FORMS A, AD, AF, U, UD AND UF |
BS ISO 1641-3:2003
|
End mills and slot drills Milling cutters with 7/24 taper shanks |
VDI 3357:2014-01
|
Sliding elements in large stamping dies |
BS ISO 7206-12:2016
|
Implants for surgery. Partial and total hip joint prostheses Deformation test method for acetabular shells |
BS ISO 16839:2013
|
Steel wire ropes. Determination of the transverse rigidity of steel wire ropes under no axial load condition |
BS ISO 26623-2:2014
|
Polygonal taper interface with flange contact surface Dimensions and designation of receivers |
BS ISO 7388-2:2007
|
Tool shanks with 7/24 taper for automatic tool changers Dimensions and designation of shanks of forms J, JD and JF |
BS EN 14423:2013+A2:2019
|
Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18 bar |
VDI 3374:2004-01
|
Punches with cylindrical head with and without ejector, punchholder, retainer, backing plates, polyurethanstripper and retainer for polyurethanstripper-system in large dies |
NF EN ISO 8536-3 : 2009
|
INFUSION EQUIPMENT FOR MEDICAL USE - PART 3: ALUMINIUM CAPS FOR INFUSION BOTTLES |
VDI/NCG 5210 Blatt 3:2012-12 (Draft)
|
Test guideline and test workpiece for the water jet cutting technology - Water jet cutting - Test workpiece for micro water jet cutting |
VDI/NCG 5210 Blatt 2:2012-09 (Draft)
|
Test guideline and test workpiece for the water jet cutting technology - Water jet cutting - Test workpiece for 3D processing |
BS EN 4702-05:2017
|
Aerospace series. Quick release fastening systems for non-structural and lining applications Retaining washer |
BIS IS/ISO 7388-3 : 2007
|
TOOL SHANKS WITH 7/24 TAPER FOR AUTOMATIC TOOL CHANGERS - PART 3: RETENTION KNOBS FOR SHANKS OF FORMS AC, AD, AF, UC, UD, UF, JD AND JF |
BS EN 4710-07:2015
|
Aerospace series. Quick release fastening systems for non-structural applications Retaining grommet |
BIS IS 3406-2 : 2014
|
DIMENSIONS FOR COUNTERSINKS AND COUNTERBORES - PART 2: COUNTERBORES |
BS EN 4710-05:2015
|
Aerospace series. Quick release fastening systems for non-structural applications Spring clamp. Two ways tolerance compensation |
PD ISO/TR 17209:2013
|
Hydraulic fluid power. Two-, three-and four-port screw-in cartridge valves. Cavities with ISO 725 (UN and UNF) threads |
BS ISO 10643:2009
|
Dimensions of accessories for cutting tools and their attachments |
BS EN 4702-04:2017
|
Aerospace series. Quick release fastening systems for non-structural and lining applications Spring clamp |
BS EN 12881-1:2014
|
Conveyor belts. Fire simulation flammability testing Propane burner tests |
BS ISO 26622-2:2008
|
Modular taper interface with ball track system Dimensions and designation of receivers |
BS EN 4692:2017
|
Aerospace series. Tie Rod with integrated bolts. Locking clip |
BS EN 2824:2011
|
Aerospace series. Burning behaviour of non-metallic materials under the influence of radiating heat and flames. Determination of smoke density and gas components in the smoke of materials. Test equipment apparatus and media |
BS EN 4694:2017
|
Aerospace series. Tie rod with integrated bolts. Assembly code D, E and F |
BS ISO 10649-6:2012
|
Cutter arbors with parallel key and tenon drive Dimensions and designation of tool holders with modular taper interface with ball track system |
BS EN 4710-06:2015
|
Aerospace series. Quick release fastening systems for non-structural applications Stud. Quick-release and locking |
BS EN 4695:2017
|
Aerospace series. Tie Rod with integrated bolts. Assembly Code G, H and K |
VDI 4709:2015-08
|
Central vacuum cleaning systems - Design, testing and application in facility management |
BS ISO 3937-1:2008
|
Cutter arbors with tenon drive Dimensions of Morse taper |
BS ISO 6550-4:2014
|
Road vehicles. Sheath-type glow-plugs with conical seating and their cylinder head housing M8 x 1 glow-plugs |
BS EN 4693:2017
|
Aerospace series. Tie rod with integrated bolts. Assembly code A, B and C |
BS EN 15340:2007
|
Thermal spraying. Determination of shear load resistance of thermally sprayed coatings |
BS ISO 10649-4:2013
|
Cutter arbors with parallel key and tenon drive Dimensions and designation of tool holders with 7/24 taper without automatic tool changer |
BIS IS/ISO 7388-2 : 2007
|
TOOL SHANKS WITH 7/24 TAPER FOR AUTOMATIC TOOL CHANGERS - PART 2: DIMENSIONS AND DESIGNATION OF SHANKS OF FORMS J, JD AND JF |
BS ISO 17447-2:2015
|
Road Vehicles. Glow-plugs with conical seating and their cylinder head housing Basic characteristics and dimensions for ceramic-sheath-type glow-plugs |
BS EN 4702-03:2017
|
Aerospace series. Quick release fastening systems for non-structural and lining applications Stud - quick-release and locking |
VDI 3405 Blatt 2:2013-08
|
Additive manufacturing processes, rapid manufacturing - Beam melting of metallic parts - Qualification, quality assurance and post processing |
BS ISO 3937-2:2008
|
Cutter arbors with tenon drive Dimensions of 7/24 taper |
BS EN 4710-04:2015
|
Aerospace series. Quick release fastening systems for non-structural applications Spring clamp. One way tolerance compensation |
BS ISO 10649-5:2012
|
Cutter arbors with parallel key and tenon drive Dimensions and designation of tool holders with polygonal taper interface with flange contact surface |
BS EN ISO 8362-6:2011
|
Injection containers and accessories Caps made of aluminium-plastics combinations for injection vials |
BS ISO 8536-7:2009
|
Infusion equipment for medical use Caps made of aluminium-plastics combinations for infusion bottles |
I.S. EN 14420-6:2013
|
HOSE FITTINGS WITH CLAMP UNITS - PART 6: TW TANK TRUCK COUPLINGS |
UNE-EN ISO 3964:2017
|
Dentistry - Coupling dimensions for handpiece connectors (ISO 3964:2016) |
BS EN 60987:2015
|
Nuclear power plants. Instrumentation and control important to safety. Hardware design requirements for computer-based systems |
UNE-EN 12881-1:2014
|
Conveyor belts - Fire simulation flammability testing - Part 1: Propane burner tests |
UNE-EN 14423:2014
|
Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18 bar |
ISO 7789:2007
|
Hydraulic fluid power Two-, three- and four-port screw-in cartridge valves Cavities |
ISO 1641-3:2011
|
End mills and slot drills — Part 3: Dimensions and designation of milling cutters with 7/24 taper shanks |
ISO 8536-7:2009
|
Infusion equipment for medical use Part 7: Caps made of aluminium-plastics combinations for infusion bottles |
ISO 10649-5:2012
|
Cutter arbors with parallel key and tenon drive — Part 5: Dimensions and designation of tool holders with polygonal taper interface with flange contact surface |
ISO 11687-3:1995
|
Plain bearings Pedestal plain bearings Part 3: Centre flange bearings |
DIN EN ISO 8362-6:2011-07
|
Injection containers and accessories - Part 6: Caps made of aluminium-plastics combinations for injection vials (ISO 8362-6:2010) |
ISO 8536-3:2009
|
Infusion equipment for medical use Part 3: Aluminium caps for infusion bottles |
EN 4710-07 : 2015
|
AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL APPLICATIONS - PART 07: RETAINING GROMMET |
UNE-EN ISO 8362-7:2011
|
Injection containers and accessories - Part 7: Injection caps made of aluminium-plastics combinations without overlapping plastics part (ISO 8362-7:2006) |
EN 4702-05:2017
|
Aerospace series - Quick release fastening systems for non-structural and lining applications - Part 05: Retaining washer |
UNI EN ISO 8362-7 : 2011
|
INJECTION CONTAINERS AND ACCESSORIES - PART 7: INJECTION CAPS MADE OF ALUMINIUM-PLASTICS COMBINATIONS WITHOUT OVERLAPPING PLASTICS PART |
BS ISO 10889-6:2016
|
Tool holders with cylindrical shank Type E with cylindrical seat |
BS ISO 10889-4:2016
|
Tool holders with cylindrical shank Type C with rectangular axial seat |
UNI EN 2824 : 2012
|
AEROSPACE SERIES - BURNING BEHAVIOUR OF NON-METALLIC MATERIALS UNDER THE INFLUENCE OF RADIATING HEAT AND FLAMES - DETERMINATION OF SMOKE DENSITY AND GAS COMPONENTS IN THE SMOKE OF MATERIALS - TEST EQUIPMENT APPARATUS AND MEDIA |
BS ISO 7388-3:2016
|
Tool shanks with 7/24 taper for automatic tool changers Retention knobs of forms AD, AF, UD, UF, JD and JF |
BS ISO 7388-1:2007
|
Tool shanks with 7/24 taper for automatic tool changers Dimensions and designation of shanks of forms A, AD, AF, U, UD and UF |
UNI EN 12881-1 : 2014
|
CONVEYOR BELTS - FIRE SIMULATION FLAMMABILITY TESTING - PART 1: PROPANE BURNER TESTS |
UNI EN 14420-6 : 2013
|
HOSE FITTINGS WITH CLAMP UNITS - PART 6: TW TANK TRUCK COUPLINGS |
UNI EN 1097-2 : 2010
|
TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 2: METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION |
BS ISO 10889-3:2016
|
Tool holders with cylindrical shank Type B with rectangular radial seat |
BS ISO 10889-7:2016
|
Tool holders with cylindrical shank Type F with taper seat |
UNI EN ISO 8362-6 : 2011
|
INJECTION CONTAINERS AND ACCESSORIES - PART 6: CAPS MADE OF ALUMINIUM-PLASTICS COMBINATIONS FOR INJECTION VIALS |
DIN 7168:1991-04
|
GENERAL TOLERANCES FOR LINEAR AND ANGULAR DIMENSIONS AND GENERAL GEOMETRICAL TOLERANCES |
BS ISO 10889-2:2016
|
Tool holders with cylindrical shank Type A, shanks for tool holders of special designs |
BS EN 13261 : 2009
|
RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - AXLES - PRODUCT REQUIREMENTS |
UNI EN ISO 5459 : 2011
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - DATUMS AND DATUM SYSTEMS |
UNI ISO 129-1 : 2011
|
TECHNICAL DRAWINGS - INDICATION OF DIMENSIONS AND TOLERANCES - PART 1: GENERAL PRINCIPLES |
BS ISO 26622-1:2017
|
Modular taper interface with ball track system Dimensions and designation of shanks |
BS EN 14420-7:2013
|
Hose fittings with clamp units Cam locking couplings |
UNI EN 13261 : 2011
|
RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - AXLES - PRODUCT REQUIREMENTS |
BS ISO 7789:2007
|
Hydraulic fluid power. Two-, three- and four-port screw-in cartridge valves. Cavities |
BS ISO 10889-5:2016
|
Tool holders with cylindrical shank Type D with more than one rectangular seat |
PD ISO/TR 18569:2004
|
Safety of machinery. Guidelines for the understanding and use of safety of machinery standards. |
UNI EN 16313 : 2013
|
CONNECTIONS FOR HEATING AND COOLING APPLIANCES - DETACHABLE CONNECTION WITH OUTSIDE THREADED PIPE G 3/4 A AND INSIDE CONE |
OVE/ONORM EN 60987 : 2015
|
NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL IMPORTANT TO SAFETY - HARDWARE DESIGN REQUIREMENTS FOR COMPUTER-BASED SYSTEMS (IEC 60987:2007 + A1:2013) |
UNI EN ISO 8536-3 : 2009
|
INFUSION EQUIPMENT FOR MEDICAL USE - PART 3: ALUMINIUM CAPS FOR INFUSION BOTTLES |
EN 4692:2017
|
Aerospace series - Tie Rod with integrated bolts -Locking clip |
UNI EN 14420-7 : 2013
|
HOSE FITTINGS WITH CLAMP UNITS - PART 7: CAM LOCKING COUPLINGS |
BS 7823-2:1995
|
Pedestal plain bearings Specification for side flange bearings |
BS EN ISO 8362-7:2010
|
Injection containers and accessories Injection caps made of aluminium-plastics combinations without overlapping plastics part |
BS 7823-1:1995
|
Pedestal plain bearings Specification for pillow blocks |
UNI EN 14420-3 : 2013
|
HOSE FITTINGS WITH CLAMP UNITS - PART 3: CLAMP UNITS, BOLTED OR PINNED |
DIN ISO 12166:2006-02
|
RESISTANCE WELDING EQUIPMENT - PARTICULAR SPECIFICATIONS APPLICABLE TO TRANSFORMERS WITH ONE SECONDARY WINDING FOR MULTISPOT WELDING, AS USED IN THE AUTOMOBILE INDUSTRY |
UNI EN 14420-5 : 2013
|
HOSE FITTINGS WITH CLAMP UNITS - PART 5: THREADED CONNECTIONS |
91/83289 DC : DRAFT DEC 1991
|
PREN 3624 - AEROSPACE SERIES - POLYSULPHIDE SEALANTS, TWO-COMPONENT - TECHNICAL SPECIFICATION |
UNI EN 14420-4 : 2013
|
HOSE FITTINGS WITH CLAMP UNITS - PART 4: FLANGE CONNECTIONS |
I.S. EN 14420-5:2013
|
HOSE FITTINGS WITH CLAMP UNITS - PART 5: THREADED CONNECTIONS |
I.S. EN ISO 8536-3:2009
|
INFUSION EQUIPMENT FOR MEDICAL USE - PART 3: ALUMINIUM CAPS FOR INFUSION BOTTLES |
I.S. EN 1097-2:2010
|
TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 2: METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION |
I.S. EN 14423:2013
|
CLAMP TYPE COUPLING ASSEMBLIES FOR USE WITH STEAM HOSES RATED FOR PRESSURES UP TO 18 BAR |
ISO/ASTM 52901:2017
|
Additive manufacturing — General principles — Requirements for purchased AM parts |
UNE-EN 14420-3:2014
|
Hose fittings with clamp units - Part 3: Clamp units, bolted or pinned |
UNE-EN 16313:2014
|
Connections for heating and cooling appliances - Detachable connection with outside threaded pipe G ¾ A and inside cone |
UNE-EN 14420-5:2014
|
Hose fittings with clamp units - Part 5: Threaded connections |
DIN ISO 8536-7:2009-12
|
Infusion equipment for medical use - Part 7: Caps made of aluminium-plastics combinations for infusion bottles (ISO 8536-7:2009) |
ISO 27528:2009
|
Wood-based panels Determination of resistance to axial withdrawal of screws |
DIN EN 1097-2:2016-07 (Draft)
|
TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 2: METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION |
EN 15340:2007
|
Thermal spraying - Determination of shear load resistance of thermally sprayed coatings |
EN 4710-04 : 2015
|
AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL APPLICATIONS - PART 04: SPRING CLAMP - ONE WAY TOLERANCE COMPENSATION |
EN 4710-05 : 2015
|
AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL APPLICATIONS - PART 05: SPRING CLAMP - TWO WAYS TOLERANCE COMPENSATION |
BS ISO 8132:2014
|
Hydraulic fluid power. Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250 bar) series |
BS ISO 8133:2014
|
Hydraulic fluid power. Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) compact series |
BS EN ISO 8536-3:2009
|
Infusion equipment for medical use Aluminium caps for infusion bottles |
EN ISO 5459:2011
|
Geometrical product specifications (GPS) - Geometrical tolerancing - Datums and datum systems (ISO 5459:2011) |
EN 4693:2017
|
Aerospace series - Tie rod with integrated bolts - Assembly code A, B and C |
EN 22768-1:1993
|
General tolerances - Part 1: Tolerances for linear and angular dimensions without individual tolerance indications (ISO 2768-1:1989) |
BS EN 14420-4:2013
|
Hose fittings with clamp units Flange connections |
UNE-EN ISO 8362-6:2011
|
Injection containers and accessories - Part 6: Caps made of aluminium-plastics combinations for injection vials (ISO 8362-6:2010) |
BS ISO 1641-2:2011
|
End mills and slot drills Dimensions and designation of milling cutters with Morse taper shanks |
EN ISO 3964:2016
|
Dentistry - Coupling dimensions for handpiece connectors (ISO 3964:2016) |
EN ISO 14457:2017
|
Dentistry - Handpieces and motors (ISO 14457:2017) |
EN 4702-03 : 2017
|
AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL AND LINING APPLICATIONS - PART 03: STUD - QUICK-RELEASE AND LOCKING |
EN 14423:2013+A1:2016
|
Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18 bar |
EN 2824:2011
|
Aerospace series - Burning behaviour of non-metallic materials under the influence of radiating heat and flames - Determination of smoke density and gas components in the smoke of materials - Test equipment apparatus and media |
EN 4695:2017
|
Aerospace series - Tie Rod with integrated bolts - Assembly Code G, H and K |
EN 14420-4:2013
|
Hose fittings with clamp units - Part 4: Flange connections |
EN 14420-5:2013
|
Hose fittings with clamp units - Part 5: Threaded connections |
EN 14420-7:2013
|
Hose fittings with clamp units - Part 7: Cam locking couplings |
EN 735:1995
|
Overall dimensions of rotodynamic pumps - Tolerances |
EN ISO 8536-3:2009
|
Infusion equipment for medical use - Part 3: Aluminium caps for infusion bottles (ISO 8536-3:2009) |
EN 16313:2013
|
Connections for heating and cooling appliances - Detachable connection with outside threaded pipe G ¾ A and inside cone |
BS EN ISO 5459:2011
|
Geometrical product specifications (GPS). Geometrical tolerancing. Datums and datum systems |
EN ISO 8362-7:2010
|
Injection containers and accessories - Part 7: Injection caps made of aluminium-plastics combinations without overlapping plastics part (ISO 8362-7:2006) |
EN 4710-03 : 2015
|
AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL APPLICATIONS - PART 03: SPRING CLAMP |
EN 4710-06 : 2015
|
AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL APPLICATIONS - PART 06: STUD - QUICK-RELEASE AND LOCKING |
EN ISO 8936:2017
|
Awnings for leisure accommodation vehicles - Requirements and test methods (ISO 8936:2017) |
EN 4694:2017
|
Aerospace series - Tie rod with integrated bolts - Assembly code D, E and F |
UNE-EN 50216-12:2011
|
Power transformer and reactor fittings - Part 12: Fans |
BS ISO 3860:2011
|
Bore cutters with key drive. Form milling cutters with constant profile |
EN 4702-04 : 2017
|
AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL AND LINING APPLICATIONS - PART 04: SPRING CLAMP |
EN 14420-8:2013+A1:2016
|
Hose fittings with clamp units - Part 8: Symmetrical half coupling (Guillemin system) |
EN ISO 8362-6 : 2011
|
Injection containers and accessories - Part 6: Caps made of aluminium-plastics combinations for injection vials (ISO 8362-6:2010) |
EN 14420-6:2013
|
Hose fittings with clamp units - Part 6: TW tank truck couplings |
EN 14420-3:2013
|
Hose fittings with clamp units - Part 3: Clamp units, bolted or pinned |
I.S. EN ISO 14457:2017
|
DENTISTRY - HANDPIECES AND MOTORS (ISO 14457:2017) |
I.S. EN ISO 8936:2017
|
AWNINGS FOR LEISURE ACCOMMODATION VEHICLES - REQUIREMENTS AND TEST METHODS (ISO 8936:2017) |
IS 2102 : Part 1 : 1993(R2014)
|
General tolerances Part 1 Tolerances for linear and angular dimensions without individual tolerance indications (Third Revision) |
ISO 10303-214:2010
|
Industrial automation systems and integration Product data representation and exchange Part 214: Application protocol: Core data for automotive mechanical design processes |
ISO 3964:2016
|
Dentistry — Coupling dimensions for handpiece connectors |
ISO 16839:2013
|
Steel wire ropes — Determination of the transverse rigidity of steel wire ropes under no axial load condition |
DIN EN ISO 8936:2015-09 (Draft)
|
AWNINGS FOR LEISURE ACCOMMODATION VEHICLES - REQUIREMENTS AND TEST METHODS (ISO 8936:2017) |
IEC 60987:2007+AMD1:2013 CSV
|
Nuclear power plants - Instrumentation and control important to safety - Hardware design requirements for computer-based systems |
DIN 83227:2002-08
|
STAIRS ON SEAGOING SHIPS - STEPS |
EN 1097-2:2010
|
Tests for mechanical and physical properties of aggregates - Part 2: Methods for the determination of resistance to fragmentation |
DIN EN ISO 3964:2017-03
|
DENTISTRY - COUPLING DIMENSIONS FOR HANDPIECE CONNECTORS (ISO 3964:2016) |
UNE-EN 50180-3:2015
|
Bushings above 1 kV up to 52 kV and from 250 A to 3,15 kA for liquid filled transformers - Part 3: Requirements for bushing fixations |
DIN ISO 26622-1:2013-08
|
MODULAR TAPER INTERFACE WITH BALL TRACK SYSTEM - PART 1: DIMENSIONS AND DESIGNATION OF SHANKS (ISO 26622-1:2008) |
DIN 28025:2003-02
|
NOZZLES OF STAINLESS STEEL - PN 10 TO PN 40 |
BS ISO 26623-1:2014
|
Polygonal taper interface with flange contact surface Dimensions and designation of shanks |
DIN ISO 7388-2:2014-07
|
Tool shanks with 7/24 taper for automatic tool changers - Part 2: Dimensions and designation of shanks of forms J, JD and JF (ISO 7388-2:2007) |
EN 50216-12:2011
|
Power transformer and reactor fittings - Part 12: Fans |
EN 50180-3 : 2015 AMD 1 2017
|
BUSHINGS ABOVE 1 KV UP TO 52 KV AND FROM 250 A TO 3,15 KA FOR LIQUID FILLED TRANSFORMERS - PART 3: REQUIREMENTS FOR BUSHING FIXATIONS |
DIN EN 14420-3:2013-09
|
HOSE FITTINGS WITH CLAMP UNITS - PART 3: CLAMP UNITS, BOLTED OR PINNED |
DIN ISO 10889-4:2006-01
|
TOOL HOLDERS WITH CYLINDRICAL SHANK - PART 4: TYPE C WITH RECTANGULAR AXIAL SEAT |
BS EN 1097-2:2010
|
Tests for mechanical and physical properties of aggregates Methods for the determination of resistance to fragmentation |
DIN ISO 10889-7:2006-01
|
TOOL HOLDERS WITH CYLINDRICAL SHANK - PART 7: TYPE F WITH TAPER SEAT |
DIN EN 14420-7:2013-09
|
Hose fittings with clamp units - Part 7: Cam locking couplings |
PREN 4710-06 : DRAFT 2014
|
AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL APPLICATIONS - PART 06: STUD - QUICK-RELEASE AND LOCKING |
PREN 4695 : DRAFT 2015
|
AEROSPACE SERIES - TIE ROD WITH INTEGRATED BOLTS - ASSEMBLY CODE G, H AND K |
PREN 4693 : DRAFT 2015
|
AEROSPACE SERIES - TIE ROD WITH INTEGRATED BOLTS - ASSEMBLY CODE A, B AND C |
PREN 4710-05 : DRAFT 2014
|
AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL APPLICATIONS - PART 05: SPRING CLAMP - TWO WAYS TOLERANCE COMPENSATION |
PREN 4710-07 : DRAFT 2014
|
AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL APPLICATIONS - PART 07: RETAINING GROMMET |
PREN 4710-04 : DRAFT 2014
|
AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL APPLICATIONS - PART 04: SPRING CLAMP - ONE WAY TOLERANCE COMPENSATION |
PREN 4692 : DRAFT 2015
|
AEROSPACE SERIES - TIE ROD WITH INTEGRATED BOLTS - LOCKING CLIP |
PREN 4694 : DRAFT 2015
|
AEROSPACE SERIES - TIE ROD WITH INTEGRATED BOLTS - ASSEMBLY CODE D, E AND F |
PREN 9300-110 : 200P2
|
AEROSPACE SERIES - LOTAR - LONG TERM ARCHIVING AND RETRIEVAL OF DIGITAL TECHNICAL PRODUCT DOCUMENTATION SUCH AS 3D, CAD AND PDM DATA - PART 110: CAD MECHANICAL 3D EXPLICIT GEOMETRY INFORMATION |
UNE-EN 14420-8:2014
|
Hose fittings with clamp units - Part 8: Symmetrical half coupling (Guillemin system) |