• ISO 281:2007

    Current The latest, up-to-date edition.

    Rolling bearings Dynamic load ratings and rating life

    Available format(s):  Hardcopy, PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

    Language(s):  English, French

    Published date:  22-02-2007

    Publisher:  International Organization for Standardization

    Add To Cart

    Abstract - (Show below) - (Hide below)

    ISO 281:2007 specifies methods of calculating the basic dynamic load rating of rolling bearings within the size ranges shown in the relevant ISO publications, manufactured from contemporary, commonly used, high quality hardened bearing steel, in accordance with good manufacturing practice and basically of conventional design as regards the shape of rolling contact surfaces.

    ISO 281:2007 also specifies methods of calculating the basic rating life, which is the life associated with 90 % reliability, with commonly used high quality material, good manufacturing quality and with conventional operating conditions. In addition, it specifies methods of calculating the modified rating life, in which various reliabilities, lubrication condition, contaminated lubricant and fatigue load of the bearing are taken into account.

    ISO 281:2007 does not cover the influence of wear, corrosion and electrical erosion on bearing life.

    ISO 281:2007 is not applicable to designs where the rolling elements operate directly on a shaft or housing surface, unless that surface is equivalent in all respects to the bearing ring (or washer) raceway it replaces.

    General Product Information - (Show below) - (Hide below)

    Committee ISO/TC 4/SC 8
    Development Note Supersedes ISO 281-1 (04/2001) Supersedes ISO/DIS 281 and ISO TS 16799. (02/2007)
    Document Type Standard
    Publisher International Organization for Standardization
    Status Current
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    DD ISO/TS 16281 : 2008 ROLLING BEARINGS - METHODS FOR CALCULATING THE MODIFIED REFERENCE RATING LIFE FOR UNIVERSALLY LOADED BEARINGS
    BS ISO 14728-1:2017 Rolling bearings. Linear motion rolling bearings Dynamic load ratings and rating life
    BS ISO 20056-1 : 2017 ROLLING BEARINGS - LOAD RATINGS FOR HYBRID BEARINGS WITH ROLLING ELEMENTS MADE OF CERAMIC - PART 1: DYNAMIC LOAD RATINGS
    DD CLC/TS 50537-2 : 2010 RAILWAY APPLICATIONS - MOUNTED PARTS OF THE TRACTION TRANSFORMER AND COOLING SYSTEM - PART 2: PUMP FOR INSULATING LIQUID FOR TRACTION TRANSFORMERS AND REACTORS
    BS EN 61400-4:2013 (published 2013-04) Wind turbines Design requirements for wind turbine gea
    04/19985215 DC : DRAFT DEC 2004 BS ISO 19904-1 - PETROLEUM AND NATURAL GAS INDUSTRIES - FLOATING OFFSHORE STRUCTURES - PART 1: MONOHULLS, SEMI-SUBMERSIBLES AND SPARS
    11/30210938 DC : 0 BS EN 61400-4 - WIND TURBINES - PART 4: DESIGN REQUIREMENTS FOR WIND TURBINE GEARBOXES
    ISO/IEC 80079-38:2016 Explosive atmospheres Part 38: Equipment and components in explosive atmospheres in underground mines
    17/30363845 DC : 0 BS ISO 21927-3 - SMOKE AND HEAT CONTROL SYSTEMS - PART 3: SPECIFICATION FOR POWERED SMOKE AND HEAT EXHAUST VENTILATORS
    API 616 : 2011 GAS TURBINES FOR THE PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
    BS EN 50216-7:2002 Power transformers and reactor fittings Electric pumps for transformer oil
    12/30243465 DC : 0 BS ISO/IEC 80079-38 - EXPLOSIVE ATMOSPHERES - PART 38: EQUIPMENT AND COMPONENTS IN EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES
    API 685 : 2011 SEALLESS CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL, AND GAS INDUSTRY PROCESS SERVICE
    10/30227442 DC : 0 BS EN ISO 13710 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - RECIPROCATING POSITIVE DISPLACEMENT PUMPS
    API 661 : 2015 PETROLEUM, PETROCHEMICAL, AND NATURAL GAS INDUSTRIES - AIR-COOLED HEAT EXCHANGERS
    IPC 9591 : 0 PERFORMANCE PARAMETERS (MECHANICAL, ELECTRICAL, ENVIRONMENTAL AND QUALITY/RELIABILITY) FOR AIR MOVING DEVICES
    04/30115503 DC : DRAFT JUN 2004 EN 14986 - DESIGN OF FANS WORKING IN POTENTIALLY EXPLOSIVE ATMOSPHERES
    CSA ISO 19904-1 : 2007 : R2012 PETROLEUM AND NATURAL GAS INDUSTRIES - FLOATING OFFSHORE STRUCTURES - PART 1: MONOHULLS, SEMI-SUBMERSIBLES AND SPARS
    CEI EN 50216-7 : 2002 POWER TRANSFORMER AND REACTOR FITTINGS - PART 7: ELECTRIC PUMPS FOR TRANSFORMER OIL
    API 677 : 2006 : R2010 GENERAL-PURPOSE GEAR UNITS FOR PETROLEUM, CHEMICAL AND GAS INDUSTRY SERVICES
    DIN ISO 14728-1:2005-10 ROLLING BEARINGS - LINEAR MOTION ROLLING BEARINGS - PART 1: DYNAMIC LOAD RATINGS AND RATING LIFE
    CEI CLC/TS 50537-2 : 2011 RAILWAY APPLICATIONS - MOUNTED PARTS OF THE TRACTION TRANSFORMER AND COOLING SYSTEM - PART 2: PUMP FOR INSULATING LIQUID FOR TRACTION TRANSFORMERS AND REACTORS
    CSA C61400-1 : 2014 WIND TURBINES - PART 1: DESIGN REQUIREMENTS
    ISO 19904-1:2006 Petroleum and natural gas industries Floating offshore structures Part 1: Monohulls, semi-submersibles and spars
    DIN EN ISO/IEC 80079-38:2012-08 (Draft) EXPLOSIVE ATMOSPHERES - PART 38: EQUIPMENT AND COMPONENTS IN EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES (ISO/IEC 80079-38:2016)
    EN ISO 80079-36:2016 Explosive atmospheres - Part 36: Non-electrical equipment for explosive atmospheres - Basic method and requirements (ISO 80079-36:2016)
    BS EN ISO 80079-36:2016 Explosive atmospheres. Non-electrical equipment for explosive atmospheres. Basic method and requirements
    DIN EN 13223:2015-11 Safety requirements for cableway installations designed to carry persons - Drive systems and other mechanical equipment
    BS EN 13463-1 : 2009 NON-ELECTRICAL EQUIPMENT FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 1: BASIC METHOD AND REQUIREMENTS
    BS EN 12101-3:2015 SMOKE AND HEAT CONTROL SYSTEMS - SPECIFICATION FOR POWERED SMOKE AND HEAT EXHAUST VENTILATORS (FANS)
    CLC/TR 60079-33 : 2015 EXPLOSIVE ATMOSPHERES - PART 33: EQUIPMENT PROTECTION BY SPECIAL PROTECTION 'S' (IEC 60079-33:2012)
    EN 12101-3:2015 Smoke and heat control systems - Part 3: Specification for powered smoke and heat control ventilators (Fans)
    EN 13463-1:2009 Non-electrical equipment for use in potentially explosive atmospheres - Part 1: Basic method and requirements
    EN 12080:2017 Railway applications - Axleboxes - Rolling bearings
    EN ISO 80079-37:2016 Explosive atmospheres - Part 37: Non-electrical equipment for explosive atmospheres - Non-electrical type of protection constructional safety 'c', control of ignition sources 'b', liquid immersion 'k' (ISO 80079-37:2016)
    10/30165662 DC : 0 BS ISO 13706 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - AIRCOOLED HEAT EXCHANGERS
    I.S. EN 13463-5:2011 NON-ELECTRICAL EQUIPMENT INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 5: PROTECTION BY CONSTRUCTIONAL SAFETY 'C'
    S.R. CLC/TR 60079-33:2015 EXPLOSIVE ATMOSPHERES - PART 33: EQUIPMENT PROTECTION BY SPECIAL PROTECTION 'S'
    16/30285989 DC : 0 BS ISO 15243 - ROLLING BEARINGS - DAMAGE AND FAILURES - TERMS, CHARACTERISTICS AND CAUSES
    BS ISO/TS 16799 : 1999 ROLLING BEARINGS - DYNAMIC LOAD RATINGS AND RATING LIFE - DISCONTINUITIES IN THE CALCULATING OF BASIC DYNAMIC LOAD RATINGS
    DD CLC/TS 50537-3 : 2010 RAILWAY APPLICATIONS - MOUNTED PARTS OF THE TRACTION TRANSFORMER AND COOLING SYSTEM - PART 3: WATER PUMP FOR TRACTION CONVERTERS
    I.S. EN ISO 19904-1:2006 PETROLEUM AND NATURAL GAS INDUSTRIES - FLOATING OFFSHORE STRUCTURES - PART 1: MONOHULLS, SEMI-SUBMERSIBLES AND SPARS
    BS EN 61400-1 : 2005 WIND TURBINES - PART 1: DESIGN REQUIREMENTS
    CLC/TS 50537-2 : 2010 RAILWAY APPLICATIONS - MOUNTED PARTS OF THE TRACTION TRANSFORMER AND COOLING SYSTEM - PART 2: PUMP FOR INSULATING LIQUID FOR TRACTION TRANSFORMERS AND REACTORS
    BS PD ISO/TR 1281-2 : 2008 ROLLING BEARINGS - EXPLANATORY NOTES ON ISO 281 - PART 2: MODIFIED RATING LIFE CALCULATION, BASED ON A SYSTEMS APPROACH TO FATIGUE STRESSES
    07/30160767 DC : 0 BS EN 13463-1 - NON-ELECTRICAL EQUIPMENT FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 1: BASIC METHOD AND REQUIREMENTS
    15/30304304 DC : 0 BS EN 12080 - RAILWAY APPLICATIONS - AXLEBOXES - ROLLING BEARINGS
    S.R. CEN/TR 16829:2016 FIRE AND EXPLOSION PREVENTION AND PROTECTION FOR BUCKET ELEVATORS
    CLC/TS 50537-3 : 2010 RAILWAY APPLICATIONS - MOUNTED PARTS OF THE TRACTION TRANSFORMER AND COOLING SYSTEM - PART 3: WATER PUMP FOR TRACTION CONVERTERS
    I.S. EN ISO 80079-36:2016 EXPLOSIVE ATMOSPHERES - PART 36: NON-ELECTRICAL EQUIPMENT FOR EXPLOSIVE ATMOSPHERES - BASIC METHOD AND REQUIREMENTS (ISO/DIS 80079-36:2014)
    CSA ISO 19904-1 : 2007 : R2017 PETROLEUM AND NATURAL GAS INDUSTRIES - FLOATING OFFSHORE STRUCTURES - PART 1: MONOHULLS, SEMI-SUBMERSIBLES AND SPARS
    ISO/TS 16799:1999 Rolling bearings Dynamic load ratings and rating life Discontinuities in the calculating of basic dynamic load ratings
    PREN 14986 : DRAFT 2014 DESIGN OF FANS WORKING IN POTENTIALLY EXPLOSIVE ATMOSPHERES
    API 674 : 2010 POSITIVE DISPLACEMENT PUMPS - RECIPROCATING
    API 674 : 2010 : ERR 1 : 2014 POSITIVE DISPLACEMENT PUMPS - RECIPROCATING
    ISO 13348:2007 Industrial fans Tolerances, methods of conversion and technical data presentation
    PREN 12080 : DRAFT 2015 RAILWAY APPLICATIONS - AXLEBOXES - ROLLING BEARINGS
    NF EN 61400-1 : 2006 AMD 1 2015 WIND TURBINES - PART 1: DESIGN REQUIREMENTS
    DIN EN 12101-3:2015-12 SMOKE AND HEAT CONTROL SYSTEMS - PART 3: SPECIFICATION FOR POWERED SMOKE AND HEAT CONTROL VENTILATORS (FANS)
    DIN EN 12080:2015-06 (Draft) RAILWAY APPLICATIONS - AXLEBOXES - ROLLING BEARINGS
    DIN EN ISO 80079-36 E : 2016 EXPLOSIVE ATMOSPHERES - PART 36: NON-ELECTRICAL EQUIPMENT FOR EXPLOSIVE ATMOSPHERES - BASIC METHOD AND REQUIREMENTS (ISO 80079-36:2016)
    BS EN ISO 13709:2003 CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES
    UNE-EN 12101-3:2016 Smoke and heat control systems - Part 3: Specification for powered smoke and heat control ventilators (Fans)
    ISO 80079-36:2016 Explosive atmospheres Part 36: Non-electrical equipment for explosive atmospheres Basic method and requirements
    BS EN ISO 10440-2:2001 (published 2002-10) Petroleum and natural gas industries. Rotary-type positive-displacement compressors Packaged air compressors (oil-free)
    UNE-EN 13223:2015 Safety requirements for cableway installations designed to carry persons - Drive systems and other mechanical equipment
    BS EN 12080:2017 Railway applications. Axleboxes. Rolling bearings
    I.S. EN 12080:2017 RAILWAY APPLICATIONS - AXLEBOXES - ROLLING BEARINGS
    I.S. EN ISO 10440-1:2007 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - ROTARY TYPE POSITIVE-DISPLACEMENT COMPRESSORS - PART 1: PROCESS COMPRESSORS
    DIN EN 13463-5:2011-10 NON-ELECTRICAL EQUIPMENT INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 5: PROTECTION BY CONSTRUCTIONAL SAFETY 'C'
    DIN EN 13463-5:2004-03 NON-ELECTRICAL EQUIPMENT INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 5: PROTECTION BY CONSTRUCTIONAL SAFETY 'C'
    DIN EN 13463-1:2009-07 NON-ELECTRICAL EQUIPMENT FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 1: BASIC METHOD AND REQUIREMENTS
    EN 61400-1:2005/A1:2010 WIND TURBINES - PART 1: DESIGN REQUIREMENTS
    I.S. EN 12101-3:2015 SMOKE AND HEAT CONTROL SYSTEMS - PART 3: SPECIFICATION FOR POWERED SMOKE AND HEAT CONTROL VENTILATORS (FANS)
    I.S. EN 13223:2015 SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - DRIVE SYSTEMS AND OTHER MECHANICAL EQUIPMENT
    EN 50216-7:2002 Power transformer and reactor fittings - Part 7: Electric pumps for transformer oil
    DIN 611:2010-05 Rolling bearings - Summary
    I.S. EN ISO 13706:2011 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - AIR-COOLED HEAT EXCHANGERS (ISO 13706:2011)
    I.S. EN ISO 9908:1998 TECHNICAL SPECIFICATIONS FOR CENTRIFUGAL PUMPS - CLASS 3
    DIN EN 12080:2017-11 Railway applications - Axleboxes - Rolling bearings
    I.S. EN 14986:2017 DESIGN OF FANS WORKING IN POTENTIALLY EXPLOSIVE ATMOSPHERES
    CEI CLC/TS 50537-3 : 2011 RAILWAY APPLICATIONS - MOUNTED PARTS OF THE TRACTION TRANSFORMER AND COOLING SYSTEM - PART 3: WATER PUMP FOR TRACTION CONVERTERS
    BS 848-9(2006) : 2006 FANS FOR GENERAL PURPOSES - PART 9: TOLERANCES, METHODS OF CONVERSION AND TECHNICAL DATA PRESENTATION
    I.S. EN 13463-1:2009 NON-ELECTRICAL EQUIPMENT FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 1: BASIC METHOD AND REQUIREMENTS
    09/30199364 DC : 0 BS EN 13463-5 - NON-ELECTRICAL EQUIPMENT INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 5: PROTECTION BY CONSTRUCTIONAL SAFETY 'C'
    BS EN ISO 80079-37 : 2016 EXPLOSIVE ATMOSPHERES - PART 37: NON-ELECTRICAL EQUIPMENT FOR EXPLOSIVE ATMOSPHERES - NON-ELECTRICAL TYPE OF PROTECTION CONSTRUCTIONAL SAFETY ''C'', CONTROL OF IGNITION SOURCES ''B'', LIQUID IMMERSION ''K'' (ISO 80079-37:2016)
    I.S. EN 61400-4:2013 WIND TURBINES - PART 4: DESIGN REQUIREMENTS FOR WIND TURBINE GEARBOXES (IEC 61400-4:2012 (EQV))
    DIN EN ISO 80079-37:2016-12 Explosive atmospheres - Part 37: Non-electrical equipment for explosive atmospheres - Non-electrical type of protection constructional safety "c", control of ignition sources "b", liquid immersion "k" (ISO 80079-37:2016)
    API 674 REDLINE : 2010 POSITIVE DISPLACEMENT PUMPS - RECIPROCATING
    17/30291980 DC : 0 BS EN ISO 19904-1 - PETROLEUM AND NATURAL GAS INDUSTRIES - FLOATING OFFSHORE STRUCTURES - PART 1: SHIP-SHAPED, SEMI-SUBMERSIBLE, SPAR AND SHALLOW-DRAUGHT CYLINDRICAL STRUCTURES
    ISO 15243:2017 Rolling bearings — Damage and failures — Terms, characteristics and causes
    04/30114086 DC : DRAFT JUL 2004 EN ISO 10440-1 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - ROTARY-TYPE POSITIVE DISPLACEMENT COMPRESSORS - PART 1: PROCESS COMPRESSORS (OIL-FREE)
    BS 7784(1994) : 1994 AMD 9864 TECHNICAL SPECIFICATIONS FOR CENTRIFUGAL PUMPS - CLASS I
    DIN ISO 9908:1998-04 CENTRIFUGAL PUMPS - TECHNICAL SPECIFICATIONS FOR CENTRIFUGAL PUMPS - CLASS 3
    14/30294092 DC : 0 BS EN 14986 - DESIGN OF FANS WORKING IN POTENTIALLY EXPLOSIVE ATMOSPHERES
    API 677 :2006 GENERAL-PURPOSE GEAR UNITS FOR PETROLEUM, CHEMICAL AND GAS INDUSTRY SERVICES
    API 611 : 2008 GENERAL-PURPOSE STEAM TURBINES FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
    AGMA 6123 : REV A : 1988 DESIGN MANUAL FOR ENCLOSED EPICYCLIC GEAR DRIVES
    API 616 REDLINE : 2011 GAS TURBINES FOR THE PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
    API 673 : 2014 CENTRIFUGAL FANS FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
    API STD 541 : 2014 FORM-WOUND SQUIRREL CAGE INDUCTION MOTORS - 375 KW (500 HORSEPOWER) AND LARGER
    API 674 : 2010 : INC : ERR 1 : 2015 : R2016 POSITIVE DISPLACEMENT PUMPS - RECIPROCATING
    API 619 REDLINE : 2010 ROTARY-TYPE POSITIVE DISPLACEMENT COMPRESSORS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES
    PREN 13001-3-4 : DRAFT 2016 CRANES - GENERAL DESIGN - PART 3-4: LIMIT STATES AND PROOF OF COMPETENCE OF MACHINERY - BEARINGS
    IEC 60079-33:2012 Explosive atmospheres - Part 33: Equipment protection by special protection 's'
    ISO/TR 1281-1:2008 Rolling bearings Explanatory notes on ISO 281 Part 1: Basic dynamic load rating and basic rating life
    ISO 14728-1:2017 Rolling bearings Linear motion rolling bearings Part 1: Dynamic load ratings and rating life
    EN ISO/IEC 80079-38:2016 Explosive atmospheres - Part 38: Equipment and components in explosive atmospheres in underground mines (ISO/IEC 80079-38:2016)
    I.S. EN 50216-7:2002 POWER TRANSFORMER AND REACTOR FITTINGS - PART 7: ELECTRIC PUMPS FOR TRANSFORMER OIL
    BS EN ISO 9905 : 1998 TECHNICAL SPECIFICATIONS FOR CENTRIFUGAL PUMPS - CLASS 1
    ISO 10440-2:2001 Petroleum and natural gas industries Rotary-type positive-displacement compressors Part 2: Packaged air compressors (oil-free)
    ISO 13631:2002 Petroleum and natural gas industries Packaged reciprocating gas compressors
    UNE-EN 13463-5:2013 Non-electrical equipment intended for use in potentially explosive atmospheres - Part 5: Protection by constructional safety 'c'
    UNI EN ISO 13706 : 2012 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - AIR-COOLED HEAT EXCHANGERS
    UNI EN 13463-1 : 2009 NON-ELECTRICAL EQUIPMENT FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 1: BASIC METHOD AND REQUIREMENTS
    UNI EN 13463-5 : 2011 NON-ELECTRICAL EQUIPMENT INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 5: PROTECTION BY CONSTRUCTIONAL SAFETY 'C'
    UNI EN ISO 9905 : 2011 TECHNICAL SPECIFICATIONS FOR CENTRIFUGAL PUMPS - CLASS 1
    UNI EN ISO 9908 : 2011 TECHNICAL SPECIFICATIONS FOR CENTRIFUGAL PUMPS - CLASS 3
    UNI EN ISO 10440-1 : 2008 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - ROTARY-TYPE POSITIVE-DISPLACEMENT COMPRESSORS - PART 1: PROCESS COMPRESSORS
    UNI EN ISO 15783 : 2009 Seal-less rotodynamic pumps - Class II - Specification
    DIN EN ISO/IEC 80079-38 E : 2017 EXPLOSIVE ATMOSPHERES - PART 38: EQUIPMENT AND COMPONENTS IN EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES (ISO/IEC 80079-38:2016)
    API 618 : 2007 : R2016 RECIPROCATING COMPRESSORS FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
    API 2FPS : 2011 PLANNING, DESIGNING, AND CONSTRUCTING FLOATING PRODUCTION SYSTEMS
    DIN 628-6 E : 1999 SINGLE-ROW, ANGULAR CONTACT RADIAL BALL BEARINGS WITH CONTACT ANGLES OF 15 DEGREES AND 25 DEGREES
    BS ISO 15243:2017 (published 2017-05) Rolling bearings. Damage and failures. Terms, characteristics and causes
    PREN 13223 : DRAFT 2013 SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - DRIVE SYSTEMS AND OTHER MECHANICAL EQUIPMENT
    16/30322061 DC : DRAFT MAR 2016 BS EN 13001-3-4 - CRANES - GENERAL DESIGN - PART 3-4: LIMIT STATES AND PROOF OF COMPETENCE OF MACHINERY - BEARINGS
    I.S. EN 61400-1:2005 WIND TURBINES - PART 1: DESIGN REQUIREMENTS
    13/30277113 DC : 0 BS EN 13223 - SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - DRIVE SYSTEMS AND OTHER MECHANICAL EQUIPMENT
    16/30322294 DC : 0 BS ISO 20056-1 - ROLLING BEARINGS - LOAD RATINGS FOR HYBRID BEARINGS WITH ROLLING ELEMENTS MADE OF CERAMIC - PART 1: DYNAMIC LOAD RATINGS
    BS ISO 15241 : 2012 ROLLING BEARINGS - SYMBOLS FOR PHYSICAL QUANTITIES
    API 677 : 2006 : R2016 GENERAL-PURPOSE GEAR UNITS FOR PETROLEUM, CHEMICAL AND GAS INDUSTRY SERVICES
    AGMA 6123 : REV A : 2006 DESIGN MANUAL FOR ENCLOSED EPICYCLIC GEAR DRIVES
    CSA ISO 19904-1 : 2007 PETROLEUM AND NATURAL GAS INDUSTRIES - FLOATING OFFSHORE STRUCTURES - PART 1: MONOHULLS, SEMI-SUBMERSIBLES AND SPARS
    API 619 : 2010 ROTARY-TYPE POSITIVE DISPLACEMENT COMPRESSORS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES
    API 674 : 2010(R2016) POSITIVE DISPLACEMENT PUMPS - RECIPROCATING
    AGMA 6123 : REV A : 1988 : R2000 DESIGN MANUAL FOR ENCLOSED EPICYCLIC GEAR DRIVES
    API 546 : 2008 BRUSHLESS SYNCHRONOUS MACHINES - 500 KVA AND LARGER
    API 610 : 2010 CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES
    API 674 : 2010 : ERR 2 : 2015 POSITIVE DISPLACEMENT PUMPS - RECIPROCATING
    API 610 REDLINE : 2010 CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES
    BS EN ISO/IEC 80079-38 : 2016 EXPLOSIVE ATMOSPHERES - PART 38: EQUIPMENT AND COMPONENTS IN EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES (ISO/IEC 80079 38:2016)
    I.S. EN ISO/IEC 80079-38:2016 EXPLOSIVE ATMOSPHERES - PART 38: EQUIPMENT AND COMPONENTS IN EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES (ISO/IEC/DIS 80079-38:2012)
    I.S. EN ISO 80079-37:2016 EXPLOSIVE ATMOSPHERES - PART 37: NON-ELECTRICAL EQUIPMENT FOR EXPLOSIVE ATMOSPHERES - NON-ELECTRICAL TYPE OF PROTECTION CONSTRUCTIONAL SAFETY ''C'', CONTROL OF IGNITION SOURCES ''B'', LIQUID IMMERSION ''K'' (ISO/DIS 80079-37:2014)
    UNE-EN ISO 80079-37:2018 Explosive atmospheres - Part 37: Non-electrical equipment for explosive atmospheres - Non-electrical type of protection constructional safety 'c', control of ignition sources 'b', liquid immersion 'k' (ISO 80079-37:2016)
    HI 1.3 : 2013 ROTODYNAMIC CENTRIFUGAL PUMPS FOR DESIGN AND APPLICATION
    ISO 81400-4:2005 Wind turbines Part 4: Design and specification of gearboxes
    OVE/ONORM EN 61400-1 : 2011 WIND TURBINES - PART 1: DESIGN REQUIREMENTS
    I.S. EN ISO 13709:2009 CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES
    BS EN 13463-5 : 2011 NON-ELECTRICAL EQUIPMENT INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 5: PROTECTION BY CONSTRUCTIONAL SAFETY 'C'
    BS EN ISO 10440-1:2001 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - ROTARY-TYPE POSITIVE-DISPLACEMENT COMPRESSORS - PART 1: PROCESS COMPRESSORS
    BS EN 13223:2015 Safety requirements for cableway installations designed to carry persons. Drive systems and other mechanical equipment
    BS EN ISO 9908 : 1998 TECHNICAL SPECIFICATIONS FOR CENTRIFUGAL PUMPS - CLASS 3
    ISO 15783:2002 Seal-less rotodynamic pumps Class II Specification
    BS EN 14986:2007 DESIGN OF FANS WORKING IN POTENTIALLY EXPLOSIVE ATMOSPHERES
    ISO 13710:2004 Petroleum, petrochemical and natural gas industries Reciprocating positive displacement pumps
    UNE-EN 14986:2017 Design of fans working in potentially explosive atmospheres
    ISO 13706:2011 Petroleum, petrochemical and natural gas industries — Air-cooled heat exchangers
    UNE-EN 61400-4:2013 Wind turbines - Part 4: Design requirements for wind turbine gearboxes
    ISO/TS 16281:2008 Rolling bearings Methods for calculating the modified reference rating life for universally loaded bearings
    BS EN ISO 13710:2004 Petroleum, petrochemical and natural gas industries. Reciprocating positive displacement pumps
    IEC 61400-1:2005+AMD1:2010 CSV Wind turbines - Part 1: Design requirements
    ISO 80079-37:2016 Explosive atmospheres Part 37: Non-electrical equipment for explosive atmospheres Non-electrical type of protection constructional safety 'c', control of ignition sources 'b', liquid immersion 'k'
    BS EN ISO 19904-1:2006 PETROLEUM AND NATURAL GAS INDUSTRIES - FLOATING OFFSHORE STRUCTURES - PART 1: MONOHULLS, SEMI-SUBMERSIBLES AND SPARS
    ISO 9905:1994 Technical specifications for centrifugal pumps — Class I
    BS PD CLC/TR 60079-33 : 2015 EXPLOSIVE ATMOSPHERES - PART 33: EQUIPMENT PROTECTION BY SPECIAL PROTECTION 'S'
    BS IEC 60079-33 : 2012 EXPLOSIVE ATMOSPHERES - PART 33: EQUIPMENT PROTECTION BY SPECIAL PROTECTION 'S'
    ISO 10440-1:2007 Petroleum, petrochemical and natural gas industries — Rotary-type positive-displacement compressors — Part 1: Process compressors
    ISO 9908:1993 Technical specifications for centrifugal pumps — Class III
    UNE-EN 13463-1:2011 Non-electrical equipment for use in potentially explosive atmospheres - Part 1: Basic method and requirements
    DIN EN ISO 80079-36:2016-12 Explosive atmospheres - Part 36: Non-electrical equipment for explosive atmospheres - Basic method and requirements (ISO 80079-36:2016)
    EN ISO 13709:2009 CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES
    EN ISO 10440-2:2001 Petroleum and natural gas industries - Rotary-type positive-displacement compressors - Part 2: Packaged air compressors (oil-free) (ISO 10440-2:2001)
    EN 14986:2017 DESIGN OF FANS WORKING IN POTENTIALLY EXPLOSIVE ATMOSPHERES
    EN ISO 9908:1997/A1:2011 Technical specifications for centrifugal pumps - Class III - Amendment 1 (ISO 9908:1993/AMD 1:2011)
    EN ISO 13706:2011 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - AIR-COOLED HEAT EXCHANGERS (ISO 13706:2011)
    EN ISO 9905:1997/A1:2011 Technical specifications for centrifugal pumps - Class I - Amendment 1 (ISO 9905:1994/AMD 1:2011)
    EN ISO 13631 : 2002 PETROLEUM AND NATURAL GAS INDUSTRIES - PACKAGED RECIPROCATING GAS COMPRESSORS
    EN ISO 15783:2003/A1:2008 Seal-less rotodynamic pumps - Class II - Specification - Amendment 1 (ISO 15783:2003/Amd 1:2008)
    EN ISO 10440-1 : 2007 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - ROTARY-TYPE POSITIVE-DISPLACEMENT COMPRESSORS - PART 1: PROCESS COMPRESSORS
    EN ISO 19904-1 : 2006 PETROLEUM AND NATURAL GAS INDUSTRIES - FLOATING OFFSHORE STRUCTURES - PART 1: MONOHULLS, SEMI-SUBMERSIBLES AND SPARS
    EN ISO 13710 : 2004 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - RECIPROCATING POSITIVE DISPLACEMENT PUMPS
    API 618 : 2007 RECIPROCATING COMPRESSORS FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
    DIN EN ISO 80079-37 E : 2016 EXPLOSIVE ATMOSPHERES - PART 37: NON-ELECTRICAL EQUIPMENT FOR EXPLOSIVE ATMOSPHERES - NON-ELECTRICAL TYPE OF PROTECTION CONSTRUCTIONAL SAFETY 'C', CONTROL OF IGNITION SOURCES 'B', LIQUID IMMERSION 'K' (ISO 80079-37:2016)
    ISO/TR 13593:1999 Enclosed gear drives for industrial applications
    09/30152273 DC : 0 BS IEC/TS 60034-20-2 - ROTATING ELECTRICAL MACHINES - PART 20-2: PERFORMANCE CHARACTERISTICS AND TESTING SPECIFICATIONS FOR BRUSHLESS PERMANENT MAGNET MOTORS
    UNE-EN 61400-1:2006 Wind turbines - Part 1: Design requirements
    API 685 REDLINE : 2011 SEALLESS CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL, AND GAS INDUSTRY PROCESS SERVICE
    ISO/TR 1281-2:2008 Rolling bearings Explanatory notes on ISO 281 Part 2: Modified rating life calculation, based on a systems approach to fatigue stresses
    ISO 20056-1:2017 Rolling bearings — Load ratings for hybrid bearings with rolling elements made of ceramic — Part 1: Dynamic load ratings
    04/30111935 DC : DRAFT APR 2004 ISO 13706 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - AIRCOOLED HEAT EXCHANGERS
    12/30243459 DC : 0 BS ISO/IEC 80079-37 - EXPLOSIVE ATMOSPHERES - PART 37: NON-ELECTRICAL EQUIPMENT FOR USE IN EXPLOSIVE ATMOSPHERES - NON-ELECTRICAL TYPE OF PROTECTION CONSTRUCTIONAL SAFETY 'CH', CONTROL OF IGNITION SOURCES 'BH', LIQUID IMMERSION 'KH'
    API 675 : 2012 POSITIVE DISPLACEMENT PUMPS - CONTROLLED VOLUME FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
    API 611 REDLINE : 2008 GENERAL-PURPOSE STEAM TURBINES FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
    PD ISO/TR 1281-1:2008 ROLLING BEARINGS - EXPLANATORY NOTES ON ISO 281 - PART 1: BASIC DYNAMIC LOAD RATING AND BASIC RATING LIFE
    PREN 13463-5 : DRAFT 2009 NON-ELECTRICAL EQUIPMENT INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 5: PROTECTION BY CONSTRUCTIONAL SAFETY 'C'
    BS ISO 19904-1 : 2006 AMD 16927 PETROLEUM AND NATURAL GAS INDUSTRIES - FLOATING OFFSHORE STRUCTURES - PART 1: MONOHULLS, SEMI-SUBMERSIBLES AND SPARS
    BS 7736(1994) : 1994 AMD 9865 TECHNICAL SPECIFICATIONS FOR CENTRIFUGAL PUMPS - CLASS III
    01/711686 DC : DRAFT AUG 2001 ISO 14728-1 - ROLLING BEARINGS - LINEAR MOTION ROLLING BEARINGS - PART 1: DYNAMIC LOAD RATINGS AND RATING LIFE
    BS ISO 81400-4 : 2005 WIND TURBINES - PART 4: DESIGN AND SPECIFICATION OF GEARBOXES
    API 611 : 2008 : R2014 GENERAL-PURPOSE STEAM TURBINES FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
    00/541592 DC : DRAFT NOV 2000 BS EN 13463-5 - NON-ELECTRICAL EQUIPMENT INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 5: PROTECTION BY CONSTRUCTIONAL SAFETY
    95/704659 DC : DRAFT MAR 1995 PREN 1872 - MACHINES FOR UNDERGROUND MINES - SAFETY REQUIREMENTS FOR MINING VENTILATION MACHINERY - ELECTRICALLY DRIVEN FANS FOR UNDERGROUND USE
    BS PD CEN/TR 16829 : 2016 FIRE AND EXPLOSION PREVENTION AND PROTECTION FOR BUCKET ELEVATORS
    HI 2.3 : 2013 ROTODYNAMIC VERTICAL PUMPS OF RADIAL, MIXED, AND AXIAL FLOW TYPES FOR DESIGN AND APPLICATION
    API 2C : 2012 OFFSHORE PEDESTAL-MOUNTED CRANES
    ISO 15241:2012 Rolling bearings Symbols for physical quantities
    S.R. CLC/TS 50537-2:2010 RAILWAY APPLICATIONS - MOUNTED PARTS OF THE TRACTION TRANSFORMER AND COOLING SYSTEM - PART 2: PUMP FOR INSULATING LIQUID FOR TRACTION TRANSFORMERS AND REACTORS
    S.R. CLC/TS 50537-3:2010 RAILWAY APPLICATIONS - MOUNTED PARTS OF THE TRACTION TRANSFORMER AND COOLING SYSTEM - PART 3: WATER PUMP FOR TRACTION CONVERTERS
    BS EN ISO 13706:2011 Petroleum, petrochemical and natural gas industries. Aircooled heat exchangers
    BS EN ISO 13631:2002 Petroleum and natural gas industries. Packaged reciprocating gas compressors
    BS EN ISO 15783 : 2003 SEAL-LESS ROTODYNAMIC PUMPS - CLASS 2 - SPECIFICATION
    12/30236742 DC : 0 BS ISO/IEC 80079-36 - EXPLOSIVE ATMOSPHERES - PART 36: NON-ELECTRICAL EQUIPMENT FOR USE IN EXPLOSIVE ATMOSPHERES - BASIC METHODS AND REQUIREMENTS
    ISO 13709:2009 Centrifugal pumps for petroleum, petrochemical and natural gas industries
    DIN 628-6:1999-07 SINGLE-ROW, ANGULAR CONTACT RADIAL BALL BEARINGS WITH CONTACT ANGLES OF 15 DEGREES AND 25 DEGREES
    EN 13223:2015 Safety requirements for cableway installations designed to carry persons - Drive systems and other mechanical equipment
    EN 13463-5:2011 Non-electrical equipment intended for use in potentially explosive atmospheres - Part 5: Protection by constructional safety 'c'
    EN 61400-4 : 2013 WIND TURBINES - PART 4: DESIGN REQUIREMENTS FOR WIND TURBINE GEARBOXES (IEC 61400-4:2012)
    DIN EN ISO 15783:2010-04 Seal-less rotodynamic pumps - Class II - Specification (ISO 15783:2002 + Amd.1:2008) (includes Amendment A1:2008)

    Standards Referencing This Book - (Show below) - (Hide below)

    ISO 5593:1997 Rolling bearings Vocabulary
    ISO/TR 1281-2:2008 Rolling bearings Explanatory notes on ISO 281 Part 2: Modified rating life calculation, based on a systems approach to fatigue stresses
    ISO 11171:2016 Hydraulic fluid power Calibration of automatic particle counters for liquids
    ISO/TR 8646:1985 Explanatory notes on ISO 281/1-1977
    ISO 15241:2012 Rolling bearings Symbols for physical quantities
    ISO 16889:2008 Hydraulic fluid power Filters Multi-pass method for evaluating filtration performance of a filter element
    ISO 76:2006 Rolling bearings Static load ratings
    ISO/TS 16281:2008 Rolling bearings Methods for calculating the modified reference rating life for universally loaded bearings
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective