I.S. EN 3840:2007
|
AEROSPACE SERIES - PAINTS AND VARNISHES - TECHNICAL SPECIFICATION |
I.S. EN 10329:2006
|
STEEL TUBES AND FITTINGS FOR ONSHORE AND OFFSHORE PIPELINES - EXTERNAL FIELD JOINT COATINGS |
13/30283193 DC : 0
|
BS EN 3021 - AEROSPACE SERIES - MOLYBDENUM DISULPHIDE DRY FILM LUBRICANTS GRAPHITE FREE - TECHNICAL SPECIFICATIONS |
08/30181243 DC : DRAFT APR 2008
|
BS EN ISO 7579 - DYESTUFFS - DETERMINATION OF SOLUBILITY IN ORGANIC SOLVENTS - GRAVIMETRIC AND PHOTOMETRIC METHODS |
DIN EN ISO 277:2011-02
|
Binders for paints and varnishes - Raw tung oil - Requirements and methods of test (ISO 277:2002) |
BS ISO 150 : 2006 AMD 17093
|
RAW, REFINED AND BOILED LINSEED OIL FOR PAINTS AND VARNISHES - SPECIFICATIONS AND METHODS OF TEST |
PREN 1504-2 : DRAFT 2015
|
PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 2: SURFACE PROTECTION SYSTEMS FOR CONCRETE |
10/30215721 DC : 0
|
BS EN ISO 3233 - PAINTS AND VARNISHES - DETERMINATION OF PERCENTAGE VOLUME OF NON-VOLATILE MATTER BY MEASURING THE DENSITY OF A DRIED COATING |
BS 6782-14.1(2000) : 2000 AMD 10883
|
BINDERS FOR PAINTS AND VARNISHES - PART 14 - METHODS OF TEST FOR ALKYD RESINS - SECTION 14.1 - GENERAL METHODS |
ONORM EN 4687 : 2012
|
AEROSPACE SERIES - PAINTS AND VARNISHES - CHROMATE FREE NON CORROSION INHIBITING TWO COMPONENTS COLD CURING PRIMER FOR MILITARY APPLICATION |
BS EN 3021:2017
|
Aerospace series. Molybdenum disulphide dry film lubricants graphite and halogen free. Technical specification |
BS 6782-16.1(2000) : 2000 AMD 15238
|
BINDERS FOR PAINTS AND VARNISHES - PART 16: METHODS FOR TEST FOR ALKYD RESINS - SECTION 16.1: GENERAL METHODS |
BS 3900-A24(2000) : 2000 AMD 13286
|
METHODS OF TEST FOR PAINTS - GROUP A: TESTS ON LIQUID PAINTS (EXCLUDING CHEMICAL TESTS) - PART A24: QUANTITATIVE DETERMINATION OF VOLATILE ORGANIC COMPOUND (VOC) CONTENT BY A GAS CHROMATOGRAPHIC METHOD |
08/30184633 DC : DRAFT SEP 2008
|
BS EN 1871 - ROAD MARKING MATERIALS - LABORATORY METHODS FOR IDENTIFICATION |
BS EN 16074:2011
|
Paints and varnishes. Determination of non-volatile matter content and spreading rate of coil coating materials |
PREN 2435-05 : 200P1
|
AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION RESISTANT CHROMATED TWO COMPONENT COLD CURING EPOXY PRIMER - PART 05: HIGH CORROSION RESISTANCE FOR MILITARY APPLICATION |
PREN 3021 : DRAFT 2015
|
AEROSPACE SERIES - MOLYBDENUM DISULPHIDE DRY FILM LUBRICANTS GRAPHITE AND HALOGEN FREE - TECHNICAL SPECIFICATION |
BS EN ISO 12215-1:2000
|
Small craft. Hull construction and scantlings Materials. Thermosetting resins, glass-fibre reinforcement, reference laminate |
ISO 4619:1998
|
Driers for paints and varnishes |
I.S. EN ISO 150:2007
|
RAW, REFINED AND BOILED LINSEED OIL FOR PAINTS AND VARNISHES - SPECIFICATIONS AND METHODS OF TEST |
I.S. EN 3021:2017
|
AEROSPACE SERIES - MOLYBDENUM DISULPHIDE DRY FILM LUBRICANTS GRAPHITE AND HALOGEN FREE - TECHNICAL SPECIFICATION |
I.S. EN 15651-4:2017
|
SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 4: SEALANTS FOR PEDESTRIAN WALKWAYS |
DIN EN ISO 4619:2011-02
|
DRIERS FOR PAINTS AND VARNISHES |
UNE-EN 15651-4:2017
|
Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 4: Sealants for pedestrian walkways |
XP P98 633 : 2001 XP
|
HORIZONTAL ROAD MARKING - MARKINGS APPLIED ON THE ROADS - DETERMINATION OF FAST IDENTIFICATION PROPERTIES |
UNI EN ISO 4619 : 2011
|
DRIERS FOR PAINTS AND VARNISHES |
EN ISO 150:2007
|
Raw, refined and boiled linseed oil for paints and varnishes - Specifications and methods of test (ISO 150:2006) |
DIN EN ISO 11890-2:2013-07
|
PAINTS AND VARNISHES - DETERMINATION OF VOLATILE ORGANIC COMPOUND (VOC) CONTENT - PART 2: GAS-CHROMATOGRAPHIC METHOD (ISO 11890-2:2013) |
ISO 21809-3:2016
|
Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 3: Field joint coatings |
I.S. EN ISO 2808:2007
|
PAINTS AND VARNISHES - DETERMINATION OF FILM THICKNESS |
DIN EN ISO 7579:2010-03
|
Dyestuffs - Determination of solubility in organic solvents - Gravimetric and photometric methods (ISO 7579:2009) |
DIN EN 1504-2:2015-03 (Draft)
|
PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 2: SURFACE PROTECTION SYSTEMS FOR CONCRETE |
BS EN 14879-2:2006
|
Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Coatings on metallic components |
BS EN 2436-006:2006
|
Aerospace series. Paints and varnishes. Corrosion resistant chromate-free two component cold curing epoxy primer High corrosion resistance for military application |
BS EN ISO 17895:2005
|
Paints and varnishes. Determination of the volatile organic compound content of low-VOC emulsion paints (in-can VOC) |
BS EN ISO 7579:2009
|
Dyestuffs. Determination of solubility in organic solvents. Gravimetric and photometric methods |
BS EN ISO 11909:2007
|
Binders for paints and varnishes. Polyisocyanate resins. General methods of test |
BS EN ISO 2808:2007
|
Paints and varnishes. Determination of film thickness |
ISO 3233-3:2015
|
Paints and varnishes — Determination of the percentage volume of non-volatile matter — Part 3: Determination by calculation from the non-volatile-matter content determined in accordance with ISO 3251, the density of the coating material and the density of the solvent in the coating material |
EN 10245-1:2011
|
Steel wire and wire products - Organic coatings on steel wire - Part 1: General rules |
EN 12802:2011
|
Road marking materials - Laboratory methods for identification |
EN 10339:2007
|
Steel tubes for onshore and offshore water pipelines - Internal liquid applied epoxy linings for corrosion protection |
DIN EN 14879-2:2007-02
|
Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 2: Coatings on metallic components |
ISO 14448:2016
|
Low modulus adhesives for exterior tile finishing |
BS EN ISO 3233-1:2013
|
Paints and varnishes. Determination of the percentage volume of non-volatile matter Method using a coated test panel to determine non-volatile matter and to determine dry film density by the Archimedes principle |
BS 3900-D11:1998
|
Methods of test for paints. Optical tests on paint films Determination of contrast ratio (opacity) of light-coloured paints at a fixed spreading rate |
BS EN ISO 4619:2010
|
Driers for paints and varnishes |
11/30242926 DC : DRAFT MAY 2011
|
BS ISO 12000 - PLASTICS/RUBBER - POLYMER DISPERSIONS AND RUBBER LATICES (NATURAL AND SYNTHETIC) - DEFINITIONS AND REVIEW OF TEST METHODS |
I.S. EN 15651-2:2017
|
SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 2: SEALANTS FOR GLAZING |
BS EN ISO 14446:2010
|
Binders for paints and varnishes. Determination of the viscosity of industrial cellulose nitrate solutions and classification of such solutions |
I.S. EN ISO 16000-11:2006
|
INDOOR AIR - PART 11: DETERMINATION OF THE EMISSION OF VOLATILE ORGANIC COMPOUNDS FROM BUILDING PRODUCTS AND FURNISHING - SAMPLING, STORAGE OF SAMPLES AND PREPARATION OF TEST SPECIMENS |
14/30280554 DC : 0
|
BS ISO 14448 - LOW MODULUS ADHESIVES FOR EXTERIOR TILE FINISHING |
BS ISO 705:2015
|
Rubber latex. Determination of density between 5 °C and 40 °C |
04/30124059 DC : DRAFT OCT 2004
|
ISO 150 - RAW, REFINED AND BOILED LINSEED OIL FOR PAINTS AND VARNISHES - SPECIFICATIONS AND METHODS OF TEST |
14/30304007 DC : 0
|
BS EN 62899-2-1 ED.1 - PRINTED ELECTRONICS - MATERIALS - PART 2-1: CONDUCTIVE MATERIAL INK |
DIN EN ISO 3233-1 E : 2013
|
PAINTS AND VARNISHES - DETERMINATION OF THE PERCENTAGE VOLUME OF NON-VOLATILE MATTER - PART 1: METHOD USING A COATED TEST PANEL TO DETERMINE NON-VOLATILE MATTER AND TO DETERMINE DRY FILM DENSITY BY THE ARCHIMEDES PRINCIPLE (ISO 3233-1:2013) |
DIN EN ISO 3233-3 E : 2015
|
PAINTS AND VARNISHES - DETERMINATION OF THE PERCENTAGE VOLUME OF NON-VOLATILE MATTER - PART 3: DETERMINATION BY CALCULATION FROM THE NON-VOLATILE-MATTER CONTENT DETERMINED IN ACCORDANCE WITH ISO 3251, THE DENSITY OF THE COATING MATERIAL AND THE DENSITY OF THE SOLVENT IN THE COATING MATERIAL (ISO 3233-3:2015) |
BS ISO 14448:2016
|
Low modulus adhesives for exterior tile finishing |
04/30114371 DC : DRAFT JUN 2004
|
EN 10339 - STEEL TUBES FOR ONSHORE AND OFFSHORE WATER PIPELINES - INTERNAL LIQUID APPLIED EPOXY LININGS FOR CORROSION PROTECTION |
DIN EN 15651-1:2016-10 (Draft)
|
SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 1: SEALANTS FOR FACADE ELEMENTS |
DIN EN ISO 3233-1:2013-05
|
PAINTS AND VARNISHES - DETERMINATION OF PERCENTAGE VOLUME OF NON-VOLATILE MATTER - PART 1: METHOD USING A COATED TEST PANEL TO DETERMINE NON-VOLATILE MATTER AND TO DETERMINE DRY-FILM DENSITY BY THE ARCHIMEDES PRINCIPLE (ISO 3233-1:2013) |
ISO 12000:2014
|
Plastics/rubber — Polymer dispersions and rubber latices (natural and synthetic) — Definitions and review of test methods |
BS EN ISO 277:2010
|
Binders for paints and varnishes. Raw tung oil. Requirements and methods of test |
DIN EN 15651-4:2016-10 (Draft)
|
SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 4: SEALANTS FOR PEDESTRIAN WALKWAYS |
04/30109201 DC : DRAFT OCT 2004
|
EN 14879-2 - ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 2: COATINGS ON METALLIC COMPONENTS |
08/30184630 DC : DRAFT SEP 2008
|
BS EN 12802 - ROAD MARKING MATERIALS - LABORATORY METHODS FOR IDENTIFICATION |
I.S. EN ISO 277:2010
|
BINDERS FOR PAINTS AND VARNISHES - RAW TUNG OIL - REQUIREMENTS AND METHODS OF TEST |
BS ISO 277 : 2002
|
BINDERS FOR PAINTS AND VARNISHES - RAW TUNG OIL - REQUIREMENTS AND METHODS OF TEST |
DIN EN ISO 150:2007-05
|
RAW, REFINED AND BOILED LINSEED OIL FOR PAINTS AND VARNISHES - SPECIFICATIONS AND METHODS OF TEST |
BS EN 15651-3:2017
|
Sealants for non-structural use in joints in buildings and pedestrian walkways Sealants for sanitary joints |
I.S. EN 4687:2012
|
AEROSPACE SERIES - PAINTS AND VARNISHES - CHROMATE FREE NON CORROSION INHIBITING TWO COMPONENTS COLD CURING PRIMER FOR MILITARY APPLICATION |
I.S. EN 16074:2011
|
PAINTS AND VARNISHES - DETERMINATION OF NON-VOLATILE-MATTER CONTENT AND SPREADING RATE OF COIL COATING MATERIALS |
BS EN 15814 : 2011
|
POLYMER MODIFIED BITUMINOUS THICK COATINGS FOR WATERPROOFING - DEFINITIONS AND REQUIREMENTS |
I.S. EN ISO 23811:2009
|
PAINTS AND VARNISHES - DETERMINATION OF PERCENTAGE VOLUME OF NON-VOLATILE MATTER BY MEASURING THE NON-VOLATILE MATTER CONTENT AND THE DENSITY OF THE COATING MATERIAL, AND CALCULATION OF THE THEORETICAL SPREADING RATE |
I.S. EN 15814:2011
|
POLYMER MODIFIED BITUMINOUS THICK COATINGS FOR WATERPROOFING - DEFINITIONS AND REQUIREMENTS |
NF EN ISO 14446 : 2011
|
BINDERS FOR PAINTS AND VARNISHES - DETERMINATION OF THE VISCOSITY OF INDUSTRIAL CELLULOSE NITRATE SOLUTIONS AND CLASSIFICATION OF SUCH SOLUTIONS |
I.S. EN ISO 12058-1:2002
|
PLASTICS - DETERMINATION OF VISCOSITY USING A FALLING-BALL VISCOMETER - PART 1: INCLINED-TUBE METHOD |
NF EN ISO 4619 : 2011
|
DRIERS FOR PAINTS AND VARNISHES |
I.S. EN ISO 6504-3:2007
|
PAINTS AND VARNISHES - DETERMINATION OF HIDING POWER - PART 3: DETERMINATION OF CONTRAST RATIO OF LIGHT-COLOURED PAINTS AT A FIXED SPREADING RATE |
BS EN ISO 6504-3:2007
|
Paints and varnishes. Determination of hiding power Determination of contrast ratio of light-coloured paints at a fixed spreading rate |
DIN EN 12802:2011-12
|
Road marking materials - Laboratory methods for identification |
BS EN ISO 10082:2000
|
Plastics. Phenolic resins. Classification and test methods |
ISO 16000-11:2006
|
Indoor air — Part 11: Determination of the emission of volatile organic compounds from building products and furnishing — Sampling, storage of samples and preparation of test specimens |
UNE-EN ISO 11890-2:2013
|
Paints and varnishes - Determination of volatile organic compound (VOC) content - Part 2: Gas-chromatographic method (ISO 11890-2:2013) |
BS EN ISO 11890-1:2007
|
Paints and varnishes. Determination of volatile organic compound (VOC) content Difference method |
EN ISO 11890-2:2013
|
PAINTS AND VARNISHES - DETERMINATION OF VOLATILE ORGANIC COMPOUND (VOC) CONTENT - PART 2: GAS-CHROMATOGRAPHIC METHOD (ISO 11890-2:2013) |
I.S. EN ISO 11909:2007
|
BINDERS FOR PAINTS AND VARNISHES - POLYISOCYANATE RESINS - GENERAL METHODS OF TEST |
I.S. EN 12802:2011
|
ROAD MARKING MATERIALS - LABORATORY METHODS FOR IDENTIFICATION |
I.S. EN ISO 7579:2009
|
DYESTUFFS - DETERMINATION OF SOLUBILITY IN ORGANIC SOLVENTS - GRAVIMETRIC AND PHOTOMETRIC METHODS |
I.S. EN 10245-1:2011
|
STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES |
DIN ISO 6744-1:2002-11
|
BINDERS FOR PAINTS AND VARNISHES - ALKYD RESINS - PART 1: GENERAL METHOD OF TEST |
I.S. EN 1504-5:2013
|
PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 5: CONCRETE INJECTION |
UNI EN 4687 : 2013
|
AEROSPACE SERIES - PAINTS AND VARNISHES - CHROMATE FREE NON CORROSION INHIBITING TWO COMPONENTS COLD CURING PRIMER FOR MILITARY APPLICATION |
DIN EN ISO 12058-1:2002-12
|
PLASTICS - DETERMINATION OF VISCOSITY USING A FALLING-BALL VISCOMETER - PART 1: INCLINED-TUBE METHOD |
I.S. EN ISO 11890-1:2007
|
PAINTS AND VARNISHES - DETERMINATION OF VOLATILE ORGANIC COMPOUND (VOC) CONTENT - PART 1: DIFFERENCE METHOD |
I.S. EN ISO 7143:2007
|
BINDERS FOR PAINTS AND VARNISHES - METHODS OF TEST FOR CHARACTERIZING WATER-BASED BINDERS |
ONORM EN ISO 11890-2 : 2013
|
PAINTS AND VARNISHES - DETERMINATION OF VOLATILE ORGANIC COMPOUND (VOC) CONTENT - PART 2: GAS-CHROMATOGRAPHIC METHOD (ISO 11890-2:2013) |
EN 4687:2012
|
Aerospace series - Paints and varnishes - Chromate free non corrosion inhibiting two components cold curing primer for military application |
BS 3900-A10:1998
|
Methods of test for paints. Tests on liquid paints (excluding chemical tests) Determination of percentage volume of non-volatile matter by measurement of the density of a dried coating |
BS 3900-D11(2007) : 2007
|
PAINTS AND VARNISHES - DETERMINATION OF HIDING POWER - PART 3: DETERMINATION OF CONTRAST RATIO OF LIGHT-COLOURED PAINTS AT A FIXED SPREADING RATE |
BS 3900-C5(2007) : 2007
|
PAINTS AND VARNISHES - DETERMINATION OF FILM THICKNESS |
03/309868 DC : DRAFT AUG 2003
|
PREN ISO/DIS 17895 - PAINTS AND VARNISHES - DETERMINATION OF THE VOLATILE ORGANIC COMPOUND (IN-CAN VOC) CONTENT OF WATER-BASED EMULSION PAINTS |
ISO 705:2015
|
Rubber latex Determination of density between 5 degrees C and 40 degrees C |
09/30205302 DC : 0
|
BS EN 4687 - AEROSPACE SERIES - PAINTS AND VARNISHES - CHROMATE FREE (NON CORROSION INHIBITING) TWO COMPONENT COLD CURING PRIMER - CHROMAT FREE PRIMER FOR MILITARY APPLICATION |
07/30083514 DC : 0
|
BS EN ISO 21809-3 - PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED AND SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 3: FIELD JOINT COATINGS |
UNE-EN 15651-1:2017
|
Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 1: Sealants for facade elements |
17/30336222 DC : 0
|
BS EN 62899-203 - PRINTED ELECTRONICS - PART 203 - MATERIALS - SEMICONDUCTOR INK |
DIN EN 15651-2:2016-10 (Draft)
|
SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 2: SEALANTS FOR GLAZING |
BS IEC 62899-202:2016
|
Printed electronics Materials. Conductive ink |
BS EN ISO 12058-1:2002
|
Plastics. Determination of viscosity using a falling-ball viscometer Inclined-tube method |
I.S. EN 15651-3:2017
|
SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 3: SEALANTS FOR SANITARY JOINTS |
18/30369599 DC : 0
|
BS EN ISO 150 - RAW, REFINED AND BOILED LINSEED OIL FOR PAINTS AND VARNISHES - SPECIFICATIONS AND METHODS OF TEST |
DIN EN 15651-3:2016-10 (Draft)
|
SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 3: SEALANTS FOR SANITARY JOINTS |
BS 3900-A23(2000) : 2000 AMD 13285
|
METHODS OF TEST FOR PAINTS - GROUP A: TESTS ON LIQUID PAINTS (EXCLUDING CHEMICAL TESTS) - PART A 23: QUANTITATIVE DETERMINATION OF VOLATILE ORGANIC COMPOUND (VOC) CONTENT BY A DIFFERENCE METHOD |
BS 3900-K2(2001) : 2001 AMD 15246
|
METHODS OF TEST FOR PAINTS - GROUP K: DETERMINATION OF RELEASE RATE OF BIOCIDES FROM ANTIFOULING PAINTS - PART K2: DETERMINATION OF COPPER-ION CONCENTRATION IN THE EXTRACT AND CALCULATION OF THE RELEASE RATE |
I.S. EN ISO 4619:2010
|
DRIERS FOR PAINTS AND VARNISHES |
NF EN ISO 277 : 2011
|
BINDERS FOR PAINTS AND VARNISHES - RAW TUNG OIL - REQUIREMENTS AND METHODS OF TEST |
BS EN ISO 23811:2009
|
Paints and varnishes. Determination of percentage volume of non-volatile matter by measuring the nonvolatile matter content and the density of the coating material, and calculation of the theoretical spreading rate |
DIN EN ISO 14446:2011-02
|
Binders for paints and varnishes - Determination of the viscosity of industrial cellulose nitrate solutions and classification of such solutions (ISO 14446:1999) |
UNE-EN ISO 3233-3:2015
|
Paints and varnishes - Determination of the percentage volume of non-volatile matter - Part 3: Determination by calculation from the non-volatile-matter content determined in accordance with ISO 3251, the density of the coating material and the density of the solvent in the coating material (ISO/FDIS 3233-3:2014) |
UNI EN 16074 : 2011
|
PAINTS AND VARNISHES - DETERMINATION OF NON-VOLATILE-MATTER CONTENT AND SPREADING RATE OF COIL COATING MATERIALS |
08/30180835 DC : DRAFT JUNE 2008
|
BS EN 10245-1 - STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES |
PREN 2436-06 : 200P1
|
AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION RESISTANT CHROMATE-FREE TWO COMPONENT COLD CURING EPOXY PRIMER - PART 06: HIGH CORROSION RESISTANCE FOR MILITARY APPLICATION |
PREN 2434-05 : 200P1
|
AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - PART 05: HIGH FLEXIBILITY AND CHEMICAL AGENT RESISTANCE FOR MILITARY APPLICATION |
IEC 62899-202:2016
|
Printed electronics - Part 202: Materials - Conductive ink |
I.S. EN ISO 3233-1:2013
|
PAINTS AND VARNISHES - DETERMINATION OF THE PERCENTAGE VOLUME OF NON-VOLATILE MATTER - PART 1: METHOD USING A COATED TEST PANEL TO DETERMINE NON-VOLATILE MATTER AND TO DETERMINE DRY FILM DENSITY BY THE ARCHIMEDES PRINCIPLE (ISO 3233-1:2013) |
ISO 12215-1:2000
|
Small craft — Hull construction and scantlings — Part 1: Materials: Thermosetting resins, glass-fibre reinforcement, reference laminate |
I.S. EN 15651-1:2017
|
SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 1: SEALANTS FOR FACADE ELEMENTS |
UNE-EN ISO 14446:2011
|
Binders for paints and varnishes - Determination of the viscosity of industrial cellulose nitrate solutions and classification of such solutions (ISO 14446:1999) |
UNI EN ISO 3233-1 : 2013
|
PAINTS AND VARNISHES - DETERMINATION OF THE PERCENTAGE VOLUME OF NON-VOLATILE MATTER - PART 1: METHOD USING A COATED TEST PANEL TO DETERMINE NON-VOLATILE MATTER AND TO DETERMINE DRY FILM DENSITY BY THE ARCHIMEDES PRINCIPLE |
PREN 12542 : DRAFT 2016
|
LPG EQUIPMENT AND ACCESSORIES - STATIC WELDED STEEL CYLINDRICAL TANKS, SERIALLY PRODUCED FOR THE STORAGE OF LIQUEFIED PETROLEUM GAS (LPG) HAVING A VOLUME NOT GREATER THAN 13 M[3] - DESIGN AND MANUFACTURE |
EN ISO 6504-3:2007
|
Paints and varnishes - Determination of hiding power - Part 3: Determination of contrast ratio of light-coloured paints at a fixed spreading rate (ISO 6504-3:2006) |
DIN EN 14879-2 E : 2007
|
ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 2: COATINGS ON METALLIC COMPONENTS |
DIN EN ISO 7143:2007-05
|
Binders for paints and varnishes - Methods of test for characterizing water-based binders (ISO 7143:2007) |
DIN EN 14879-3 E : 2007
|
ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 3: COATINGS ON CONCRETE COMPONENTS |
DIN EN ISO 11890-1:2007-09
|
PAINTS AND VARNISHES - DETERMINATION OF VOLATILE ORGANIC COMPOUND (VOC) CONTENT - PART 1: DIFFERENCE METHOD |
BS EN 10329 : 2005
|
STEEL TUBES AND FITTINGS FOR ONSHORE AND OFFSHORE PIPELINES - EXTERNAL FIELD JOINT COATINGS |
BS EN 13966-1:2003
|
Determination of the transfer efficiency of atomising and spraying equipment for liquid coating materials Flat panels |
ISO 17895:2005
|
Paints and varnishes Determination of the volatile organic compound content of low-VOC emulsion paints (in-can VOC) |
BS EN 1504-2:2004
|
Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity Surface protection systems for concrete |
ISO 6504-3:2006
|
Paints and varnishes Determination of hiding power Part 3: Determination of contrast ratio of light-coloured paints at a fixed spreading rate |
BS EN ISO 6744-1:2004
|
Binders for paints and varnishes. Alkyd resins General methods |
UNE-EN ISO 7579:2010
|
Dyestuffs - Determination of solubility in organic solvents - Gravimetric and photometric methods (ISO 7579:2009) |
UNE-EN ISO 3233-1:2013
|
Paints and varnishes - Determination of the percentage volume of non-volatile matter - Part 1: Method using a coated test panel to determine non-volatile matter and to determine dry film density by the Archimedes principle (ISO 3233-1:2013) |
DIN EN 1504-2:2005-01
|
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete; German version EN 1504-2:2004 |
I.S. EN ISO 11890-2:2013
|
PAINTS AND VARNISHES - DETERMINATION OF VOLATILE ORGANIC COMPOUND (VOC) CONTENT - PART 2: GAS-CHROMATOGRAPHIC METHOD (ISO 11890-2:2013) |
DIN EN 1504-7:2006-11
|
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 7: Reinforcement corrosion protection |
EN ISO 4619:2010
|
Driers for paints and varnishes (ISO 4619:1998) |
UNI EN ISO 11890-2 : 2013
|
PAINTS AND VARNISHES - DETERMINATION OF VOLATILE ORGANIC COMPOUND (VOC) CONTENT - PART 2: GAS-CHROMATOGRAPHIC METHOD |
EN 1504-5:2013
|
PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 5: CONCRETE INJECTION |
EN ISO 16000-11:2006
|
Indoor air - Part 11: Determination of the emission of volatile organic compounds from building products and furnishing - Sampling, storage of samples and preparation of test specimens (ISO 16000-11:2006) |
UNI EN 1504-7 : 2007
|
PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 7: REINFORCEMENT CORROSION PROTECTION |
UNI EN ISO 7579 : 2009
|
DYESTUFFS - DETERMINATION OF SOLUBILITY IN ORGANIC SOLVENTS - GRAVIMETRIC AND PHOTOMETRIC METHODS |
UNI EN 10245-1 : 2011
|
STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES |
UNI EN 1504-5 : 2013
|
PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 5: CONCRETE INJECTION |
UNI EN 12802 : 2011
|
ROAD MARKING MATERIALS - LABORATORY METHODS FOR IDENTIFICATION |
ISO 3233:1998
|
Paints and varnishes Determination of percentage volume of non-volatile matter by measuring the density of a dried coating |
13/30266799 DC : 0
|
BS EN ISO 3233-3 - PAINTS AND VARNISHES - DETERMINATION OF THE PERCENTAGE VOLUME OF NON-VOLATILE MATTER - PART 3: DETERMINATION BY CALCULATION FROM THE NON-VOLATILE-MATTER CONTENT DETERMINED IN ACCORDANCE WITH ISO 3251, THE DENSITY OF THE COATING MATERIAL AND THE DENSITY OF THE SOLVENT IN THE COATING MATERIAL |
BS EN ISO 12736:2014
|
Petroleum and natural gas industries. Wet thermal insulation coatings for pipelines, flow lines, equipment and subsea structures |
09/30205293 DC : 0
|
BS EN 4687 - AEROSPACE SERIES - PAINTS AND VARNISHES - CHROMATE FREE (NON CORROSION INHIBITING) TWO COMPONENT COLD CURING PRIMER - CHROMAT FREE PRIMER FOR MILITARY APPLICATION |
09/30205299 DC : 0
|
BS EN 4688 - AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION RESISTANT CHROMATED TWO COMPONENT COLD CURING EPOXY PRIMER - HIGH CORROSION RESISTANCE FOR MILITARY APPLICATION |
UNI EN ISO 23811 : 2009
|
PAINTS AND VARNISHES - DETERMINATION OF PERCENTAGE VOLUME OF NON-VOLATILE MATTER BY MEASURING THE NON-VOLATILE MATTER CONTENT AND THE DENSITY OF THE COATING MATERIAL, AND CALCULATION OF THE THEORETICAL SPREADING RATE |
UNI EN ISO 14446 : 2011
|
BINDERS FOR PAINTS AND VARNISHES - DETERMINATION OF THE VISCOSITY OF INDUSTRIAL CELLULOSE NITRATE SOLUTIONS AND CLASSIFICATION OF SUCH SOLUTIONS |
03/310937 DC : DRAFT JUNE 2003
|
EN 2436-6 - AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION RESISTANT CHROMATE FREE TWO COMPONENT COLD CURING PRIMER - PART 6: HIGH CORROSION RESISTANCE FOR MILITARY APPLICATION |
17/30358597 DC : 0
|
BS EN ISO 4619 - DRIERS FOR PAINTS AND VARNISHES |
BS EN ISO 3233-3:2015
|
Paints and varnishes. Determination of the percentage volume of non-volatile matter Determination by calculation from the non-volatile-matter content determined in accordance with ISO 3251, the density of the coating material and the density of the solvent in the coating material |
15/30309743 DC : 0
|
BS ISO 19403-3 - PAINTS AND VARNISHES - WETTABILITY - PART 3: DETERMINATION OF THE SURFACE TENSION OF LIQUIDS USING THE PENDANT DROP METHOD |
BS ISO 12000:2014
|
Plastics/rubber. Polymer dispersions and rubber lattices (natural and synthetic). Definitions and review of test methods |
DIN EN 15814 E : 2015
|
POLYMER MODIFIED BITUMINOUS THICK COATINGS FOR WATERPROOFING - DEFINITIONS AND REQUIREMENTS |
BS EN ISO 21809-3:2016
|
Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems Field joint coatings |
BS 6782-11(1999) : 1999
|
BINDERS FOR PAINTS - DETERMINATION OF THE VISCOSITY OF INDUSTRIAL CELLULOSE NITRATE SOLUTIONS AND THEIR CLASSIFICATION |
UNE-EN 15651-3:2017
|
Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 3: Sealants for sanitary joints |
I.S. EN ISO 3233-3:2015
|
PAINTS AND VARNISHES - DETERMINATION OF THE PERCENTAGE VOLUME OF NON-VOLATILE MATTER - PART 3: DETERMINATION BY CALCULATION FROM THE NON-VOLATILE-MATTER CONTENT DETERMINED IN ACCORDANCE WITH ISO 3251, THE DENSITY OF THE COATING MATERIAL AND THE DENSITY OF THE SOLVENT IN THE COATING MATERIAL (ISO/FDIS 3233-3:2014) |
UNI EN ISO 277 : 2011
|
BINDERS FOR PAINTS AND VARNISHES - RAW TUNG OIL - REQUIREMENTS AND METHODS OF TEST |
BS EN ISO 150:2007
|
Raw, refined and boiled linseed oil for paints and varnishes. Specifications and methods of test |
PREN 4588 : 200P1
|
AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT, COLD CURING POLYURETHANE PAINT, ANTI SLIP |
UNE-EN 15814:2011
|
Polymer modified bituminous thick coatings for waterproofing - Definitions and requirements |
I.S. EN ISO 14446:2010
|
BINDERS FOR PAINTS AND VARNISHES - DETERMINATION OF THE VISCOSITY OF INDUSTRIAL CELLULOSE NITRATE SOLUTIONS AND CLASSIFICATION OF SUCH SOLUTIONS |
I.S. EN ISO 12736:2014
|
PETROLEUM AND NATURAL GAS INDUSTRIES - WET THERMAL INSULATION COATINGS FOR PIPELINES, FLOW LINES, EQUIPMENT AND SUBSEA STRUCTURES (ISO 12736:2014) |
UNE 135202:2010
|
Road signalization equipment. Horizontal signalisation. Paints and cold plastic. Drying time "no pick-up". |
EN ISO 12058-1:2002/AC:2004
|
PLASTICS - DETERMINATION OF VISCOSITY USING A FALLING-BALL VISCOMETER - PART 1: INCLINED-TUBE METHOD |
NF EN ISO 12215-1 : 2001
|
SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 1: MATERIALS: THERMOSETTING RESINS, GLASS-FIBRE REINFORCEMENT, REFERENCE LAMINATE |
16/30326248 DC : 0
|
BS EN 12542 - LPG EQUIPMENT AND ACCESSORIES - STATIC WELDED STEEL CYLINDRICAL TANKS, SERIALLY PRODUCED FOR THE STORAGE OF LIQUEFIED PETROLEUM GAS (LPG) HAVING A VOLUME NOT GREATER THAN 13 M[3] - DESIGN AND MANUFACTURE |
DIN EN ISO 150 E : 2007
|
RAW, REFINED AND BOILED LINSEED OIL FOR PAINTS AND VARNISHES - SPECIFICATIONS AND METHODS OF TEST |
15/30316975 DC : 0
|
BS EN 1504-2 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 2: SURFACE PROTECTION SYSTEMS FOR CONCRETE |
ONORM EN ISO 3233-1 : 2013
|
PAINTS AND VARNISHES - DETERMINATION OF THE PERCENTAGE VOLUME OF NON-VOLATILE MATTER - PART 1: METHOD USING A COATED TEST PANEL TO DETERMINE NON-VOLATILE MATTER AND TO DETERMINE DRY FILM DENSITY BY THE ARCHIMEDES PRINCIPLE (ISO 3233-1:2013) |
DIN EN ISO 11909:2007-05
|
Binders for paints and varnishes - Polyisocyanate resins - General methods of test (ISO 11909:2007) |
BS EN ISO 7143:2007
|
Binders for Paints and varnishes. Methods of test for characterizing water-based binders |
UNE-EN 1504-2:2005
|
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete |
BS EN 12802:2011
|
Road marking materials. Laboratory methods for identification |
EN ISO 21809-3:2016
|
Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 3: Field joint coatings (ISO 21809-3:2016) |
ISO 11890-2:2013
|
Paints and varnishes Determination of volatile organic compound (VOC) content Part 2: Gas-chromatographic method |
BS EN ISO 11890-2:2013
|
Paints and varnishes. Determination of volatile organic compound (VOC) content Gas-chromatographic method |
BS EN 10339:2007
|
Steel tubes for onshore and offshore water pipelines. Internal liquid applied epoxy linings for corrosion protection |
BS EN 14879-3:2006
|
Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Coatings on concrete components |
ISO 6744-1:1999
|
Binders for paints and varnishes — Alkyd resins — Part 1: General methods of test |
ISO 2808:2007
|
Paints and varnishes Determination of film thickness |
ISO 11909:2007
|
Binders for paints and varnishes — Polyisocyanate resins — General methods of test |
ISO 7579:2009
|
Dyestuffs — Determination of solubility in organic solvents — Gravimetric and photometric methods |
UNE-EN 16074:2011
|
Paints and varnishes - Determination of non-volatile-matter content and spreading rate of coil coating materials |
BS EN 1504-5:2013
|
Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity Concrete injection |
ISO 23811:2009
|
Paints and varnishes Determination of percentage volume of non-volatile matter by measuring the non-volatile matter content and the density of the coating material, and calculation of the theoretical spreading rate |
BS EN 10245-1:2011
|
Steel wire and wire products. Organic coatings on steel wire General rules |
ISO 277:2002
|
Binders for paints and varnishes — Raw tung oil — Requirements and methods of test |
BS EN 2435-005:2006
|
Aerospace series. Paints and varnishes. Corrosion resistant chromated two component cold curing primer High corrosion resistance for military application |
UNE-EN 10245-1:2012
|
Steel wire and wire products - Organic coatings on steel wire - Part 1: General rules |
ISO 12736:2014
|
Petroleum and natural gas industries Wet thermal insulation coatings for pipelines, flow lines, equipment and subsea structures |
ISO 11890-1:2007
|
Paints and varnishes — Determination of volatile organic compound (VOC) content — Part 1: Difference method |
UNE-EN 12802:2012
|
Road marking materials - Laboratory methods for identification |
UNE-EN ISO 4619:2011
|
Driers for paints and varnishes (ISO 4619:1998) |
ISO 14446:1999
|
Binders for paints and varnishes — Determination of the viscosity of industrial cellulose nitrate solutions and classification of such solutions |
DIN EN 10245-1:2012-01
|
STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES |
EN 15651-2:2017
|
Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 2: Sealants for glazing |
EN 14879-3:2006
|
Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 3: Coatings on concrete components |
EN 14879-2:2006
|
Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 2: Coatings on metallic components |
EN ISO 3233-1:2013
|
Paints and varnishes - Determination of the percentage volume of non-volatile matter - Part 1: Method using a coated test panel to determine non-volatile matter and to determine dry film density by the Archimedes principle (ISO 3233-1:2013) |
EN 15814:2011+A2:2014
|
Polymer modified bituminous thick coatings for waterproofing - Definitions and requirements |
EN ISO 11909:2007
|
Binders for paints and varnishes - Polyisocyanate resins - General methods of test (ISO 11909:2007) |
EN ISO 2808:2007
|
Paints and varnishes - Determination of film thickness (ISO 2808:2007) |
EN ISO 3233-3:2015
|
Paints and varnishes - Determination of the percentage volume of non-volatile matter - Part 3: Determination by calculation from the non-volatile-matter content determined in accordance with ISO 3251, the density of the coating material and the density of the solvent in the coating material (ISO 3233-3:2015) |
EN ISO 7579:2009
|
Dyestuffs - Determination of solubility in organic solvents - Gravimetric and photometric methods (ISO 7579:2009) |
EN 15651-3:2017
|
Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 3: Sealants for sanitary joints |
EN 3840:2007
|
Aerospace series - Paints and varnishes - Technical specification |
EN ISO 11890-1:2007
|
Paints and varnishes - Determination of volatile organic compound (VOC) content - Part 1: Difference method (ISO 11890-1:2007) |
EN ISO 17895:2005
|
Paints and varnishes - Determination of the volatile organic compound content of low-VOC emulsion paints (in-can VOC) (ISO 17895:2005) |
EN 2434-005:2006
|
Aerospace series - Paints and varnishes - Two component cold curing polyurethane finish - Part 005: High flexibility and chemical agent resistance for military application |
EN ISO 23811:2009
|
Paints and varnishes - Determination of percentage volume of non-volatile matter by measuring the non-volatile matter content and the density of the coating material, and calculation of the theoretical spreading rate (ISO 23811:2009) |
EN 2435-005:2006
|
Aerospace series - Paints and varnishes - Corrosion resistant chromated two component cold curing primer - Part 005: High corrosion resistance for military application |
EN ISO 6744-1:2004
|
Binders for paints and varnishes - Alkyd resins - Part 1: General methods of test (ISO 6744-1:1999) |
EN ISO 12736:2014
|
Petroleum and natural gas industries - Wet thermal insulation coatings for pipelines, flow lines, equipment and subsea structures (ISO 12736:2014) |
EN 1504-7:2006
|
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 7: Reinforcement corrosion protection |
EN ISO 277:2010
|
Binders for paints and varnishes - Raw tung oil - Requirements and methods of test (ISO 277:2002) |
EN 1504-2:2004
|
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete |
EN ISO 14446:2010
|
Binders for paints and varnishes - Determination of the viscosity of industrial cellulose nitrate solutions and classification of such solutions (ISO 14446:1999) |
EN 16074:2011
|
Paints and varnishes - Determination of non-volatile-matter content and spreading rate of coil coating materials |
EN ISO 7143:2007
|
Binders for paints and varnishes - Methods of test for characterizing water-based binders (ISO 7143:2007) |
EN 2436-006:2006
|
Aerospace series - Paints and varnishes - Corrosion resistant chromate-free two component cold curing epoxy primer - Part 006: High corrosion resistance for military application |
EN 15651-1:2017
|
Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 1: Sealants for facade elements |
EN 13966-1 : 2003
|
DETERMINATION OF THE TRANSFER EFFICIENCY OF ATOMISING AND SPRAYING EQUIPMENT FOR LIQUID COATING MATERIALS - PART 1: FLAT PANELS |
EN 3021:2017
|
Aerospace series - Molybdenum disulphide dry film lubricants graphite and halogen free - Technical specification |
BS ISO 4619 : 1998
|
DRIERS FOR PAINTS AND VARNISHES |
DIN EN ISO 3233-3:2015-09
|
PAINTS AND VARNISHES - DETERMINATION OF THE PERCENTAGE VOLUME OF NON-VOLATILE MATTER - PART 3: DETERMINATION BY CALCULATION FROM THE NON-VOLATILE-MATTER CONTENT DETERMINED IN ACCORDANCE WITH ISO 3251, THE DENSITY OF THE COATING MATERIAL AND THE DENSITY OF THE SOLVENT IN THE COATING MATERIAL (ISO 3233-3:2015) |
98/124702 DC : DRAFT OCT 1998
|
DRAFT BS 3900-K3 - METHODS OF TEST FOR PAINTS - DETERMINATION OF RELEASE RATE OF BIOCIDES FROM ANTIFOULING PAINTS - DETERMINATION OF TIN-BASED BIOCIDES IN THE EXTRACT AND CALCULATION OF THE RELEASE RATE |
11/30187339 DC : 0
|
BS EN ISO 12736 - PETROLEUM AND NATURAL GAS INDUSTRIES - WET THERMAL INSULATION COATINGS FOR PIPELINES, FLOW LINES, EQUIPMENT AND SUBSEA STRUCTURES |
14/30300605 DC : 0
|
BS EN ISO 21809-3 - PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 3: FIELD JOINT COATINGS |
I.S. EN ISO 21809-3:2016
|
PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 3: FIELD JOINT COATINGS (ISO 21809-3:2016) |
ONORM EN 4689 : 2012
|
AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENTS COLD CURING POLYURETHANE FINISH - HIGH FLEXIBILITY AND CHEMICAL AGENT RESISTANCE FOR MILITARY APPLICATION |
12/30215682 DC : 0
|
BS EN ISO 3233-2 - PAINTS AND VARNISHES - DETERMINATION OF THE PERCENTAGE VOLUME OF NON-VOLATILE MATTER - PART 2: DETERMINATION BY MEASUREMENT OF THE DRY-FILM DENSITY |
04/30123574 DC : DRAFT OCT 2004
|
EN 14879-3 - ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 3: COATINGS ON CONCRETE COMPONENTS |
BS 6782-18(2001) : 2001 AMD 15243
|
BINDERS FOR PAINTS - PART 18: GENERAL METHODS OF TEST FOR WATER-DILUTABLE BINDERS |
DIN EN 15814:2015-03
|
POLYMER MODIFIED BITUMINOUS THICK COATINGS FOR WATERPROOFING - DEFINITIONS AND REQUIREMENTS |
DIN EN ISO 23811:2009-08
|
PAINTS AND VARNISHES - DETERMINATION OF PERCENTAGE VOLUME OF NON-VOLATILE MATTER BY MEASURING THE NON-VOLATILE MATTER CONTENT AND THE DENSITY OF THE COATING MATERIAL, AND CALCULATION OF THE THEORETICAL SPREADING RATE |
BS EN 3840:2007
|
Aerospace series. Paints and varnishes. Technical specification |
PREN 1504-7 : DRAFT 2015
|
PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND AVCP - PART 7: REINFORCEMENT CORROSION PROTECTION |
UNE-EN 15651-2:2017
|
Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 2: Sealants for glazing |
02/564964 DC : DRAFT NOV 2002
|
EN 13419-3 - BUILDING PRODUCTS - DETERMINATION OF THE EMISSION OF VOLATILE ORGANIC COMPOUNDS - PART 3: PROCEDURE FOR SAMPLING, STORAGE OF SAMPLES AND PREPARATION OF TEST SPECIMENS |
00/103366 DC : DRAFT APR 2000
|
PREN 1504-2 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 2: SURFACE PROTECTION SYSTEMS |
PREN 3840 : 200P2
|
AEROSPACE SERIES - PAINTS AND VARNISHES - TECHNICAL SPECIFICATION |
DIN EN 16074:2011-09
|
PAINTS AND VARNISHES - DETERMINATION OF NON-VOLATILE-MATTER CONTENT AND SPREADING RATE OF COIL COATING MATERIALS |
BS EN 15651-2:2017
|
Sealants for non-structural use in joints in buildings and pedestrian walkways Sealants for glazing |
BS EN 15651-1:2017
|
Sealants for non-structural use in joints in buildings and pedestrian walkways Sealants for facade elements |
UNE-EN ISO 21809-3:2016
|
Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 3: Field joint coatings (ISO 21809-3:2016) |
UNE-EN ISO 277:2011
|
Binders for paints and varnishes - Raw tung oil - Requirements and methods of test (ISO 277:2002) |
15/30327125 DC : 0
|
BS EN 1504-7 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND AVCP - PART 7: REINFORCEMENT CORROSION PROTECTION |
EN ISO 12215-1:2000
|
Small craft - Hull construction and scantlings - Part 1: Materials: Thermosetting resins, glass-fibre reinforcement, reference laminate (ISO 12215-1:2000) |
ISO 3233-1:2013
|
Paints and varnishes Determination of the percentage volume of non-volatile matter Part 1: Method using a coated test panel to determine non-volatile matter and to determine dry film density by the Archimedes principle |
ISO 12058-1:1997
|
Plastics Determination of viscosity using a falling-ball viscometer Part 1: Inclined-tube method |
ISO 150:2006
|
Raw, refined and boiled linseed oil for paints and varnishes Specifications and methods of test |
EN 15651-4:2017/AC:2017
|
SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 4: SEALANTS FOR PEDESTRIAN WALKWAYS |
DIN EN 1504-7:2015-09 (Draft)
|
PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 7: REINFORCEMENT CORROSION PROTECTION |
DIN EN 13966-1 E : 2003
|
DETERMINATION OF THE TRANSFER EFFICIENCY OF ATOMISING AND SPRAYING EQUIPMENT FOR LIQUID COATING MATERIALS - PART 1: FLAT PANELS |
DIN EN ISO 16000-11:2006-06
|
Indoor air - Part 11: Determination of the emission of volatile organic compounds from building products and furnishing - Sampling, storage of samples and preparation of test specimens (ISO 16000-11:2006) |
DIN EN ISO 6504-3:2007-05
|
PAINTS AND VARNISHES - DETERMINATION OF HIDING POWER - PART 3: DETERMINATION OF CONTRAST RATIO OF LIGHT-COLOURED PAINTS AT A FIXED SPREADING RATE |
DIN EN ISO 17895:2005-06
|
PAINTS AND VARNISHES - DETERMINATION OF THE VOLATILE ORGANIC COMPOUND CONTENT OF LOW-VOC EMULSION PAINTS (IN-CAN VOC) |
DIN EN 1504-5:2013-06
|
PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 5: CONCRETE INJECTION |
BS EN 1504-7:2006
|
Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity Reinforcement corrosion protection |
BS EN ISO 16000-11:2006
|
Indoor air Determination of the emission of volatile organic compounds from building products and furnishing. Sampling, storage of samples and preparation of test specimens |
BS EN 2434-005 : 2006
|
AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - PART 005: HIGH FLEXIBILITY AND CHEMICAL AGENT RESISTANCE FOR MILITARY APPLICATION |
ISO 7143:2007
|
Binders for paints and varnishes — Methods of test for characterizing water-based binders |
DIN EN 15651-3:2017-07
|
SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 3: SEALANTS FOR SANITARY JOINTS |
DIN EN ISO 6744-1:2004-09
|
Binders for paints and varnishes - Alkyd resins - Part 1: General methods of test (ISO 6744-1:1999) |
DIN EN 14879-3:2007-02
|
Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 3: Coatings on concrete components |
EN 10329:2006
|
Steel tubes and fittings for onshore and offshore pipelines - External field joint coatings |
DIN EN 10329:2006-04
|
STEEL TUBES AND FITTINGS FOR ONSHORE AND OFFSHORE PIPELINES - EXTERNAL FIELD JOINT COATINGS |
DIN EN 10339:2007-05
|
Steel tubes for onshore and offshore water pipelines - Internal liquid applied epoxy linings for corrosion protection |
ONORM EN ISO 12736 : 2015
|
PETROLEUM AND NATURAL GAS INDUSTRIES - WET THERMAL INSULATION COATINGS FOR PIPELINES, FLOW LINES, EQUIPMENT AND SUBSEA STRUCTURES (ISO 12736:2014) |